Kereskedelmi, irodai és ipari

Description
1. This module complies with international safety standards, and there are isolation slots in the control area and the load area;
2, using genuine relays;
3, with power and relay action instructions, pull-in light, disconnection does not light;
4. When there is a signal at the signal input terminal, the common terminal and the normally open terminal will conduct;
5, can be used as a microcontroller development board module, can be used as home appliance control;
6, control DC or AC signal, can control 220V AC load;
7. There is one normally open and one normally closed contact;
8. The blue KF301 terminal is more convenient to connect to the control line.

Description
1. This module complies with international safety standards, and there are isolation slots in the control area and the load area;
2, using genuine relays;
3, with power and relay action instructions, pull-in light, disconnection does not light;
4. When there is a signal at the signal input terminal, the common terminal and the normally open terminal will conduct;
5, can be used as a microcontroller development board module, can be used as home appliance control;
6, control DC or AC signal, can control 220V AC load;
7. There is one normally open and one normally closed contact;
8. The blue KF301 terminal is more convenient to connect to the control line.

Description
1. This module complies with international safety standards, and there are isolation slots in the control area and the load area;
2, using genuine relays;
3, with power and relay action instructions, pull-in light, disconnection does not light;
4. When there is a signal at the signal input terminal, the common terminal and the normally open terminal will conduct;
5, can be used as a microcontroller development board module, can be used as home appliance control;
6, control DC or AC signal, can control 220V AC load;
7. There is one normally open and one normally closed contact;
8. The blue KF301 terminal is more convenient to connect to the control line.

Description:
1  L9110S-chip motor drive
2 Module supply voltage: 2.5-12V
3 Suitable Motor range: between motor operating voltage 2.5v-12V, the maximum operating current of 0.8A, the current smart car voltage and current market are within this range
4 Drive two DC motors, or a 4-wire 2-phase stepping motor.
5 PCB board size: 2.8cm * 2.1cm ultra-small size, suitable for assembly
6 Is provided with a fixed mounting holes, diameter: 3mm
modules Interfaces:
6P black bent pin description:
1 VCC external voltage 2.5V-12V
2 GND External GND
3 AIA external microcontroller IO port
4 AIB external microcontroller IO port
5 BIA external microcontroller IO port
6 BIB external microcontroller IO port
4P green terminal:
1 OA1 OB1 contact DC 2-pin, non-directional
2 OA2 OB2 contact DC 2-pin, non-directional
Use:
ON VCC, GND module power indicator light
AIA input high, AIB input low, [OA1 OB1] motor is transferred;
AIA input low, AIB input high, [OA1 OB1] motor reversal;
BIA input high, BIB input low,] [OA2 OB2 motor is transferred;
BIA input low, BIB input high,] [OA2 OB2 motor reversal;
Package includes:
1 x L9110S H-bridge Stepper Motor Dual DC motor Driver Controller Board

The main function of this module is to reduce the DC voltage in the voltage range of 7～24V to 5V, and output DC 5V stably. It can supply power for single-chip microcomputer and sensor module with 5V DC working voltage.
Features:
(1) Input voltage range: DC 7V～24V.
(2) Maximum current: 1A.
(3) Output voltage: stable output DC 5V.

Description
Model Name: Mini-360 (ultra small size DC-DC synchronous rectifier buck module）
Module Properties: non-isolated buck
Rectification: synchronous rectification
Input voltage: 4.75V-23V
Output voltage: 1.0V-17V
Output Current: lowering the value of 3A, long 1.8A
Conversion efficiency: 96% (maximum)
Switching Frequency: 340KHz
Output ripple: 30mV (no-load)
Load regulation: ±0.5%
Voltage regulation: ±2.5%
Working temperature: -40 Centigrade to 85 Centigrade
External dimensions: 17 * 11 * 3.8 (L * W * H) (mm)
Features: Use integrally molded power inductor and synchronous rectifier control chip, smaller and more efficient.

Description
1. using the NTC thermistor sensor , good sensitivity
2. the comparator output signal clean waveform is good , driving ability, than 15mA.
3. adjust the temperature distribution bit detection threshold
4. Working voltage 3.3V-5V
5. the output format : Digital switching output (0 and 1)
6. with bolt holes for easy installation
7. a small board PCB size : 3.2cm x 1.4cm
8. using a wide voltage LM393 comparator

Description
RGB LED module consists of a plug-in full color LED made by R, G, B three pin PWM voltage.
input can be adjusted section three primary colors (red/blue/green) strength in order to achieve full color mixing effect.
Control of the module with the Arduino can be achieved cool lighting effects.
the use of plug-in full-color LED
RGB trichromatic limiting resistor to prevent burnout
through the PWM adjusting three primary colors can be mixed to obtain different colors
with a variety of single-chip interface
the working voltage: 5V
LED drive mode: common cathode driver
material:metal
colour:black
packing:1*LED Module
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Description
Program-controlled switches, photocopiers, washing machines, refrigerators, cameras, disinfection cupboards, door magnets, window magnets, electromagnetic relays, electronic weighing instruments, liquid level gauges, gas meters, water meters, etc. have all been well used.
Module features:
1. Imported normally open reed switch
2. Comparator output, clean signal, good waveform, strong driving ability, more than 15mA.
3. Working voltage 3.3V-5V
4. Output form: digital switch output (0 and 1)
5. Equipped with fixing bolt holes for easy installation
6. Small board PCB size: 3.2cm x 1.4cm
7. Use wide voltage LM393 comparator
Features of Reed Pipe:
Dry reed switch is the abbreviation of dry reed switch. It is a passive electronic switching element with contacts. It has the advantages of simple structure, small size and easy control. Its shell is generally a sealed glass tube, which is installed in the tube. There are two iron elastic reed plates, and it is filled with an inert gas called rhodium. Usually, the two reeds made of special materials in the glass tube are separated. When a magnetic substance approaches the glass tube, under the action of the magnetic field lines, the two reeds in the tube are magnetized and attracted to each other, and the reeds will attract together to connect the circuit connected to the node. After the external magnetic force disappears, the two reeds are separated due to their own elasticity, and the circuit is also disconnected. Therefore, as a line switch device controlled by a magnetic field signal, the reed switch can be used as a sensor for counting, limiting, etc. (in the security system, it is mainly used for the production of door and window magnets). It is widely used in various communication devices. In practical applications, permanent magnets are usually used to control whether the two metal pieces are connected or not, so they are also called "magnetrons."
Module instructions:
1. The reed switch needs to be used in conjunction with a magnet. When a certain magnetic force is sensed, it will be in a conducting state. The module will output low level. When there is no magnetic force, it will be in a disconnected state and output high level. The sensing distance between the magnet and the magnet is within 1.5cm. It is not sensitive or there will be no trigger phenomenon;
2. The DO output of the module can be directly connected to the I/O port of the single-chip microcomputer, and the trigger state of the reed switch can be detected through the single-chip microcomputer;
3. The DO output terminal of the module is connected with the IN terminal of the relay to form a high-power reed switch, which directly controls high voltage.

DS1307 I2C real-time clock chip (RTC) 24C32 32K I2C EEPROM memory
Using LIR2032 rechargeable lithium battery, and with a charging circuit to solve the problem of DS1307 with spare battery can not read and write. After fully charged, it can provide DS1307 timekeeping for 1 year. Small design, 27mm*28mm*8.4mm
Lead out the clock pin of DS1307 to provide the clock signal for the microcontroller. Other I2C devices can be cascaded.

Description:
1. This module uses imported high-performance chip, the performance is superior to the general module.
2. Enter any 0.9V ~ 5V DC voltage of 5V DC output voltage can be stable, with a single AA battery can deliver up to 200 ~ 300MA current, two AA batteries to output 500 ~ 600MA of current, for your phone (iphone temporarily can not), camera, microcontroller and digital products supply
3. Industrial Temperature Range: prefix = st1 ns = "urn: schemas-microsoft-com: office: smarttags" -40 Celsius ~ 85 Celsius.
4. High conversion efficiency, up to 96% .
5. With USB female seat, wide range of uses.
6. The ultra-small size (PCB board 25mm * 18mm), with the installation of a variety of small equipment inside.
7. with working lights.

Description:
1. This module uses imported high-performance chip, the performance is superior to the general module.
2. Enter any 0.9V ~ 5V DC voltage of 5V DC output voltage can be stable, with a single AA battery can deliver up to 200 ~ 300MA current, two AA batteries to output 500 ~ 600MA of current, for your phone (iphone temporarily can not), camera, microcontroller and digital products supply
3. Industrial Temperature Range: prefix = st1 ns = "urn: schemas-microsoft-com: office: smarttags" -40 Celsius ~ 85 Celsius.
4. High conversion efficiency, up to 96% .
5. With USB female seat, wide range of uses.
6. The ultra-small size (PCB board 25mm * 18mm), with the installation of a variety of small equipment inside.
7. with working lights.

 
Sell on AliExpress
Cookie Preferences
Help
Buyer Protection
App
/ English / HUF
Wish List
Account
AliExpress
Pingtoudidi Store
97.4% Positive feedback
Follow
151 Followers
0
On AliExpressIn this store
Store Home
Products
Sale Items
Top Selling
Feedback
100pcs 1/4W 10ohm-1M 1% Metal Film Resistor 0.25W 2.2 10 100 120 150 220 270 330 470 1K 2.2K 4.7K 10K 100K 470K 1M ohms
5.0
2 Reviews
2 orders
HUF 70.80
Price includes VAT
HUF 1,490.45 off Coupons For You
Get coupons
Resistance: 68K
680R
6.8K
68K
680K
150R
10R
100R
1K
10K
100K
1M
200R
2K
20K
2.2K
220K
270R
300K
22R
220R
510R
5.1K
51K
47R
470R
4.7K
47K
470K
330R
3.3K
Quantity:

2% off (20 Pieces or more)
9999 Pieces available
Ships toHungary
Shipping: HUF 532.84 
From China to Hungary via Cainiao Super Economy Global 
Estimated delivery on Aug 06 
More options
Buy Now
Add to Cart
1
90-Day Buyer Protection
Money back guarantee
More price information
Recommended For You
HUF 141.59
HUF 335.35
HUF 1,531.44
Pingtoudidi Store
Store Categories
Diode
Resistor
Quartz crystal resonator
Capacitor
Module
Battery protection board
Boost Module
MP3 Module
Speed Module
Sensor module
Clock Module
Amplifier Module
Relay Module
Step-Down Module
Controller Module
tracking module
Development board
Motor drive module
Wireless Module
Signal Generator Module
Power amplifier module
DIY Module
Adapter board
Power Module
Lilypad Module
Display
Voltmeter Module
TFT
OLED
LED Module
Instrumentation
Control panel
Decoder
Potentiometer
Dupont Line
logic analyzer
Other
Connector
Module 2
Programmer module
Storage module
Lithium battery module
Dot matrix module
Thermocouple Breakout Board
Sound card module
Raspberry Pi
Voice module
Frequency divider
Switch module
Camera Module
D1 module
Button module
Bluetooth module
Conversion Module
Ethernet network module
Cooling Module
Comparator module
Evaluation board module
Expansion board module
Decoy module
LED
5mm LED
3mm LED
Rectifier
Starter Kit
Printed circuit board
Others
Top Selling
View More ‎
Pingtoudidi Store
97.4%  Positive Feedback
151 Followers
Contact
FollowVisit Store
HUF 190.03
HUF 2,015.83
HUF 3,629.25
HUF 506.75
HUF 871.91
HUF 1,561.25
DESCRIPTIONCUSTOMER REVIEWS (2)‎SPECIFICATIONS
Report Item
Information on additional charges
For items delivered from outside the European Union, you may be subject to additional charges for VAT and, when applicable, customs duties in your country. If AliExpress is obliged by law to collect VAT, you will see the VAT inclusive price at checkout. For more information about these costs, please contact the tax and customs authorities in your country.
Links
Related Search
resistor 1180 ohm resistor 018 ohm 820 ohm resistor resistor 980 ohm resistor 14w 12w 91 ohm resistor resistors 180 ohm resistor 12k 14w 1kohm resistor 14w resistors 14w resistor 1k 14w resistor 14w 10k
Ranking Keywords
sweat suits for men black turtleneck
This product belongs to  Home , and you can find similar products at  All Categories , Electronic Components & Supplies , Passive Components , Resistors .
Help
Customer Service, Disputes & Reports, Buyer Protection, Report IPR infringement
AliExpress Multi-Language Sites
Russian, Portuguese, Spanish, French, German, Italian, Dutch, Turkish, Japanese, Korean, Thai, Vietnamese, Arabic, Hebrew, Polish
Browse by Category
All Popular, Product, Promotion, Low Price, Great Value, Reviews, Blog, Seller Portal, BLACK FRIDAY, AliExpress Assistant
Alibaba Group
Alibaba Group Website, AliExpress, Alimama, Alipay, Fliggy, Alibaba Cloud, Alibaba International, AliTelecom, DingTalk, Juhuasuan, Taobao Marketplace, Tmall, Taobao Global, AliOS, 1688
Google Play App Store
Intellectual Property Protection - Privacy Policy - Sitemap - Terms of Use - Information for EU consumers - Transaction Services Agreement for EU consumers - User Information Legal Enquiry Guide ©️2010-2022 AliExpress.com. All rights reserved. 增值电信业务经营许可证 浙B2-20120091-8 浙公网安备 33010802002248号

Description
100% Brand New.

Size:32mm*17mm*8mm(length*width*height)

Main chip:LM393, Electret condenser microphone

Working voltage: DC 4-6V

Signal output indication

Single channel signal output

The output effective signal is low level

When there is sound, outputs low level and the signal light

Can be used for Acoustic control light , give sound and light alarm working with Photosensitive sensor ,and sound control, sound detect

Circuit board output switch quantity

Note: The Maximum induction distance is 0.5

Description
Socket Adapter plate Board for 8Pin NRF24L01 Wireless Transceive module 51

Wireless module operating voltage is generally 3.3v, while the ordinary 51 microcontroller 5v, this module is easy toshop wireless module with 51 single system board used in conjunction.
This module can be any one of 51 shop is directly connected to the system board, easy to use.
It's for 8 Pin NRF24L01 Module
This is a simple socket board which is for NRF24L01 Wireless module
on-board AMS1117-3.3 chip
It could be used with NRF24L01 Wireless module at our store.


Package included:
100% Brand New
1PCS x Socket Adapter Module

Description:
TDA2030A audio amplifier circuit, often using V-5-pin single in-line plastic package structure. The integrated circuit is widely used in car stereo receiver tape recorders, medium-power audio equipment, with small size, large output power, distortion and other characteristics. And has an internal protection circuit.
Feature:
1. onboard TDA2030A audio power amplifier chip
2. mono 18W amplifier circuit design
3.on-board speaker wiring blocks
4.onboard 10K adjustable resistance, you can adjust the volume of amplification
5. Onboard power indicator
6. the chip has been the main pin leads, you can directly enter the audio signal
7. the working voltage: 6 ~ 12V
8.The peak output current is 3A

Description
Mercury switch module and digital 13 interface comes with LED to build a simple circuit, the production of tilt lights
With the digital 13 interface comes with the LED, the mercury tilt switch sensor access to digital 3 interface, when the mercury tilt switch sensor has a button signal, LED light, and vice versa.
Routine source code:
int Led = 13; // define the LED interface
int buttonpin = 3; // Define the mercury tilt switch sensor interface
int val; // Define the numeric variable val
void setup ()
{
pinMode (Led, OUTPUT); // define the LED as the output interface
pinMode (buttonpin, INPUT); // Define the mercury tilt switch sensor as the output interface
}
void loop ()
{
val = digitalRead (buttonpin); // Write the value of the numeric interface 3 to val
if (val == HIGH) // The LED flashes when the mercury tilt switch sensor detects a signal
{
digitalWrite (Led, HIGH);
}
else
{
digitalWrite (Led, LOW);
}
}

Description
The working voltage of single-chip microcomputer and equipment is 3.3V, and some single-chip microcomputers and equipment, sensors have 5.0V working voltage; when the two need to communicate, the working voltage is inconsistent; the module provides feasible in different devices of 3.3V and 5.0V Sex has played a bridging role.

Features:
(1) One-way conversion of high-voltage logic to low-voltage logic
(2) The module is compatible with breadboards and can be directly plugged into the breadboard for use
(3) Realize the direct 5V and 3.3V level communication of the serial port
(4) The highest stable communication baud rate is 28800bps
Product compatibility:
(1) AVCC connects to 5V system power supply
(2) ASCL connects to 5V system SCL
(3) ASDA connects to 5V system SDA
(4) AGND connects to 5V system GND
(5) BVCC connects to 3.3V system power supply
(6) BSCL connects to 3.3V system SCL
(7) BSDA connects to 3.3V system SDA
(8) Connect BGND to 3.3V system GND
This module can only convert the 5V voltage of channel A into 3.3V of channel B, but cannot convert the 3.3V voltage of channel B into 5V voltage of channel A.

Description
The module is based on the thermistor (resistance increases with the ambient temperature
changes) works, a sense of real-time to know the temperature of the surrounding environment changes, we send the data to the analog IO, then come down as long as we go through simple programming will be able to convert the sensor output data Celsius temperature values and displayed, it is still easy to use,It effectively, thereby widely used in gardening, home alarm systems and other devices.
Method of application
And the general temperature sensor is the same, are three-line package, when we use the power cord connected OK signal output into the end on the line, because the module output is an analog signal, we want to signal output terminal connected to the Arguing analog IO on sampling, so as to correctly read the temperature value
Test Code:
double Thermister(int RawADC)
double Temp;
Temp = log(((10240000/RawADC) - 10000));
Temp = 1 / (0.001129148 (0.000234125 (0.0000000876741 * Temp * Temp ))* Temp );
Temp = Temp - 273.15;// Convert Kelvin to Celcius
return Temp;
}
void setup() {
Serial.begin(9600);
}
void loop() {
Serial.print(Thermister(analogRead(0)));
Serial.println("c");
delay(500);

Description
Main chip: LM393
Working voltage: for DC 5V
Single channel signal output
Low level output signal used for human body touch sensor alarm
Adjustable sensitivity
With fixed bolt hole for easy installation
Works with Official for Boards
Material: PCB Brass
Dimensions: 43 x 16 x 15 mm / 1.69 x 0.63 x 0.59 inch
Weight: 3 g / 0.11 oz
Color: Black blueKSP13 37 in 1 Kit Accessories Metal Touch Sensor Module KY-036

Features
As the pin resources controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display via only 2 wires. If you already has I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic based project.

Specification:
I2C Address: 0x27
Supply voltage: 5V
the backlight and contrast is adjusted by potentiometer
Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
Compatible for 1602/2004 LCD

Introduction
Dimension: 5x7 4x6 3x7 2x8 cm
Material : double Side Copper PCB
Hole Dia:about 1mm
Hole pitch : standard 2.54mm
Quantity :4pcs
for point to point DIY soldering
Package include:
1pcs 2x8cm PCB
1pcs 3X7cm PCB
1pcs 4x6cm PCB
1pcs 5x7cm PCB

TTP223 Description:
1. Type: voltage regulator 2. Supply voltage: 2 ~ 5.5V 3. Model Number: TTP223B Digital Touch Sensor 4. Application: Digital touch sensor
TTP224 Description:
1, 4 key-board TTP224 capacitive touch sensor IC 2, 4-way board-level status indicator 3, working voltage: 2.4V-5.5V 4, the module can be set to output mode, the key output mode, the longest time and fast output / low power options 5, PCB board size: 35 (mm) x29 (mm)
TTP226 Description:
1, 8 key board TTP226 capacitive touch sensor IC 2, onboard 8-level status indicator 3, working voltage: 2.4V-5.5V 4, the module can be set to output mode, the key output mode, the longest time and fast output / low power options 5, PCB board size: 47.5 (mm) x46 (mm)
TTP229 Description:
1, onboard TTP229 capacitive touch sensor IC 16 keys 2, onboard power indicator 3, working voltage: 2.4V-5.5V 4, the module can be set to output mode, the key output mode, the longest time and fast output / low power options 5, PCB board size: 49.3 (mm) x64.5 (mm)

TTP223 Description:
1. Type: voltage regulator 2. Supply voltage: 2 ~ 5.5V 3. Model Number: TTP223B Digital Touch Sensor 4. Application: Digital touch sensor
TTP224 Description:
1, 4 key-board TTP224 capacitive touch sensor IC 2, 4-way board-level status indicator 3, working voltage: 2.4V-5.5V 4, the module can be set to output mode, the key output mode, the longest time and fast output / low power options 5, PCB board size: 35 (mm) x29 (mm)
TTP226 Description:
1, 8 key board TTP226 capacitive touch sensor IC 2, onboard 8-level status indicator 3, working voltage: 2.4V-5.5V 4, the module can be set to output mode, the key output mode, the longest time and fast output / low power options 5, PCB board size: 47.5 (mm) x46 (mm)
TTP229 Description:
1, onboard TTP229 capacitive touch sensor IC 16 keys 2, onboard power indicator 3, working voltage: 2.4V-5.5V 4, the module can be set to output mode, the key output mode, the longest time and fast output / low power options 5, PCB board size: 49.3 (mm) x64.5 (mm)

TTP223 Description:
1. Type: voltage regulator 2. Supply voltage: 2 ~ 5.5V 3. Model Number: TTP223B Digital Touch Sensor 4. Application: Digital touch sensor
TTP224 Description:
1, 4 key-board TTP224 capacitive touch sensor IC 2, 4-way board-level status indicator 3, working voltage: 2.4V-5.5V 4, the module can be set to output mode, the key output mode, the longest time and fast output / low power options 5, PCB board size: 35 (mm) x29 (mm)
TTP226 Description:
1, 8 key board TTP226 capacitive touch sensor IC 2, onboard 8-level status indicator 3, working voltage: 2.4V-5.5V 4, the module can be set to output mode, the key output mode, the longest time and fast output / low power options 5, PCB board size: 47.5 (mm) x46 (mm)
TTP229 Description:
1, onboard TTP229 capacitive touch sensor IC 16 keys 2, onboard power indicator 3, working voltage: 2.4V-5.5V 4, the module can be set to output mode, the key output mode, the longest time and fast output / low power options 5, PCB board size: 49.3 (mm) x64.5 (mm)

TTP223 Description:
1. Type: voltage regulator 2. Supply voltage: 2 ~ 5.5V 3. Model Number: TTP223B Digital Touch Sensor 4. Application: Digital touch sensor
TTP224 Description:
1, 4 key-board TTP224 capacitive touch sensor IC 2, 4-way board-level status indicator 3, working voltage: 2.4V-5.5V 4, the module can be set to output mode, the key output mode, the longest time and fast output / low power options 5, PCB board size: 35 (mm) x29 (mm)
TTP226 Description:
1, 8 key board TTP226 capacitive touch sensor IC 2, onboard 8-level status indicator 3, working voltage: 2.4V-5.5V 4, the module can be set to output mode, the key output mode, the longest time and fast output / low power options 5, PCB board size: 47.5 (mm) x46 (mm)
TTP229 Description:
1, onboard TTP229 capacitive touch sensor IC 16 keys 2, onboard power indicator 3, working voltage: 2.4V-5.5V 4, the module can be set to output mode, the key output mode, the longest time and fast output / low power options 5, PCB board size: 49.3 (mm) x64.5 (mm)

5MM LED
Working current: 20 (mA)
Working voltage:
Red: 1.9V-2.1V
Yellow: 1.9V-2.1V
Green: 1.9V-2.1V
Blue: 3.0V-3.2V
White: 3.0V-3.2V
Orange: 2.0V-2.2V

5MM LED
Working current: 20 (mA)
Working voltage:
Red: 1.9V-2.1V
Yellow: 1.9V-2.1V
Green: 1.9V-2.1V
Blue: 3.0V-3.2V
White: 3.0V-3.2V
Orange: 2.0V-2.2V

5MM LED
Working current: 20 (mA)
Working voltage:
Red: 1.9V-2.1V
Yellow: 1.9V-2.1V
Green: 1.9V-2.1V
Blue: 3.0V-3.2V
White: 3.0V-3.2V
Orange: 2.0V-2.2V

5MM LED
Working current: 20 (mA)
Working voltage:
Red: 1.9V-2.1V
Yellow: 1.9V-2.1V
Green: 1.9V-2.1V
Blue: 3.0V-3.2V
White: 3.0V-3.2V
Orange: 2.0V-2.2V

5MM LED
Working current: 20 (mA)
Working voltage:
Red: 1.9V-2.1V
Yellow: 1.9V-2.1V
Green: 1.9V-2.1V
Blue: 3.0V-3.2V
White: 3.0V-3.2V
Orange: 2.0V-2.2V

5MM LED
Working current: 20 (mA)
Working voltage:
Red: 1.9V-2.1V
Yellow: 1.9V-2.1V
Green: 1.9V-2.1V
Blue: 3.0V-3.2V
White: 3.0V-3.2V
Orange: 2.0V-2.2V

5MM LED
Working current: 20 (mA)
Working voltage:
Red: 1.9V-2.1V
Yellow: 1.9V-2.1V
Green: 1.9V-2.1V
Blue: 3.0V-3.2V
White: 3.0V-3.2V
Orange: 2.0V-2.2V

YHDC Split core cuurrent transformer SCT024TSL input 50A 100A 200A 300A 400A output 20MA 50MA 80MA 100MA accuracy 0.5%
MODEL：SCT024TSL
Technical index：
Material of core：Silicon steel sheet
Work voltage：≤720V
Operating temperature：-25℃～ 60℃
Storage temperature：-30℃～ 90℃
Frequency range：50Hz～60Hz
Dielectric strength：3.5KV 50Hz 1min
Electric Parameter:
Please note the parameters you need. Thank you
 
 

Hall Split core current sensor HSTS016L input ±10A/20A/30A/50A/100A/150A/200A output 2.5±0.625V 1%
Hall closed loop current sensor
Model：HSTS016L
Open loop, split core type, hanging installation;
Detects DC, AC and pulse current.
Technical indicators:
Rated input: ±10A/20A/30A/50A/100A/150A/200A
Input measured range: 150%
Rated output: 2.5±0.625V
Supply voltage(±5% ) 5V
Accuracy: 1%
Linearity: 1%
Flame resistance：UL94-V0
Working temperature：-10 ~ 70 ℃
Storage temperature: -25 ~ 70 ℃
Bandwidth：DC - 25KHz
Dielectric strength：2,5KV 50Hz 1min
Current consumption: ±15mA Im
Load impedance: ≥10KΩ
Zero offset TA=25℃ ≤±15mV
Response time: ＜ 5μ s
Weight: 81g
Please select the appropriate parameter for you,thank you. ^_^
Electric parameters:
Company Profile:
Dechang Electronic Co.,Ltd. was founded in 1992. We mainly produce power transformer, currrent transformer, hall effect sensor, trigger transformer and common mode chock.
Our factory covers over 12,000 square meters, including 4 workshops. We have more than 100 sets automatic wire winding machine. So we can achieve mass production and short time delivery.
Our products have got CE, ROHS, CQC certificate. The quality is guaranteed. At the same time, we promise low price and regular supply.

Split core current transformer model TST016T input 10A/20A/50A/100A output 4-20mA Supply voltage 12V 1%
 
Locked type,terminal output,suspension installation;The faulty wiring can lead to product damage;The output is linear with primary test current,and the output signal can be directly enter
automatic control equipment or PLC port.
 
Technical index：
 
Rated input: 10A/20A/50A/100A
Measured range:  12A/24A/60A/120A
Rated output: DC 4-20mA two-wire system
Supply voltage (±5% ): 24V DC
Accuracy: 1%
Linearity: 0.5%
Flame resistance: UL94-V0
Working temperature: -10 ~ 70 ℃
Storage temperature: -25 ~ 70 ℃
Dielectric strength: 2.5KV 50Hz 1min
Zero offset, TA = 25 ℃ ≤0.1mV
Response time: ＜ 350 ms
Frequency: 25-1KHz
Material of core: Feryt

PE3518-I
Power 5VA
220V/9V 
Attention: Kindly advise detail specification you require when place order.

Rogowski Coil RFSZ 80-85/105-85/150-85/180-85/240-85/300-85
Rogowski coil also called differential current sensor, it is a "hollow" circular coil, arranged around the conductor, so that an alternating magnetic field generated by the current induces a voltage in the coil. The coil is actually a transformer coupled to the conductor under test, and the voltage directly output from the coil is proportional to the rate of change of current, e.g. @50Hz/1kA Vout=85mV, @60Hz/1kA Vout=85*60/50=102mV. If you want to obtain the current waveform or current value that doesn't matter to frequency also need to add the integral circuit to achieve 90° phase shift compensation and frequency equalization.
RF series is a flexible current sensor based on Rogowski coil principle, which is in small size, light weight and easy to install and offers a choice of different sizes, which can also be customized design of the customer requires a special order. It has no magnetic saturation and a shielding layer to resist the influence of external magnetic field, so stable measurements can be achieved in the range of low current to hundreds of kA. The flexible rogowski coil is an extremely comfortable solution for current measurement, particularly suited to current monitoring and electrical retrofitting, can be used in many cases where a traditional current transformer (CT) is not available, or can replace it.
We provide 4-20mA, 0-5V, 0-1A, 333mV and other integrators suitable for more usage scenarios
https://www.poweruc.pl/collections/rogowski-coil

split-core AC current sensor
Model: SCT010
Compatible to foreign products, built-in TVS. Applicable for the current measuring monitoring and protection of AC motor, lighting equipment and air compressor.
Technical data:
Input current: 20A/50A/60A/80A
Max. Input: 120A
Output current: 10mA/16.6mA/20mA/26.6mA/40mA/50mA/80mA
Turns ratio:1:1000 1:2000 1:3000
Accuracy: 1 %
Hanging installation, leading wire 50cm
Material of core: Ferrite
Fire resistance property: UL94-V0
Work voltage: 720V
Work temperature: -25℃～ 60℃
Storage temperature: -30℃～ 90℃
Frequency range: 50Hz～1KHz
Dielectric strength: AC 3500V/1min
Linearity: 1%
Max:Sampling resistance: 10Ω
Weight:  45g

Analog output current transformer Model:TST024T Rated input: 100A/200A/300A Related output: DC 4-20mA two-wire system Supply voltage (± 5% ) 24V DC
Terminal output   
Suspension type installation  
The faulty wiring can lead to product damage   
The output is linear with primary test current and the output signal can be directly enter automatic control equipment or PLC port.
 
Technical data:
 
Rated input: 100A/200A/300A
Measured range: 120A/240A/360A
Related output: DC 4-20mA two-wire system
Supply voltage (± 5% ) 24V DC
Accuracy: 1%
Linearity: 0.5%
Supply voltage (± 5% ) 24V DC
Working temperature: -10°C ~ 70°C 
Storage temperature: -25°C ~ 70°C 
Dielectric strength: 2.5KV 50Hz 1min 
Overload capacity: 8times 0.1s 
Waterproof level: IP00
Power consumption: 38 Io mA 
Load Impedance 6V
Zero offset, TA = 25 ℃ ≤0.1mA lub  ≤10mV
Response time: <350 MS
Working frequency: 50-400Hz
Material of core: Silicon steel sheet
If you need other parameters,please leave your requirements in the order.Thanks.
Rated input: 100A/200A/300A

Encapsulated transformer
Power: 1.5VA
Input: 220V  
Output:  18V  
Attension: Kindly advise detail specifications you require when place order.

Encapsulated transformer
Power 25VA
Input voltage:2*115V
Output voltage:2*12V
More specification :
1> Input voltage can be: Double 110V, double115V, double 120V
2> Output voltage can be: 2x7V, 2x9V, 2x12V, 2x15V, 2x18V, 2x22V
3> Power: 25VA
Attention: Kindly advise detail specification you require when place order.

Encapsulated transformer
1> Input voltage can be: Double 110V
2> Output voltage can be: 2x12V
3> Power 15VA
More specification:
1> Input voltage can be: Double 110V, double115V, double 120V
2> Output voltage can be: 2x7V, 2x9V, 2x12V, 2x15V, 2x18V, 2x22V
3> Power:15VA
Attention: Kindly advise detail specification you require when place order.

YHDC split core current transformer SCT036TS Input 100A/120A/150A/200A/250A/300A/400A/500A/600A Output 5A Accuracy1%
Rated input: 100A/120A/150A/200A/250A/300A/400A/500A/600A
Rated output: 5A
Accuracy: 1 %
Linearity: 1%
Hanging installation, Crimping terminal output
Material of core: Silicon steel sheet
Flame resistance property: UL94-V0
Work voltage:≤720V
Work temperature:-25℃～ 60℃
Storage temperature:-30℃～ 90℃
Frequency range: 50Hz～60Hz
Dielectric strength:3.5KV 50Hz 1min
Phase error: 0.5±0.5°
Max:Sampling resistance: 5Ω
Weight: 310g
 

YHDC SCT019 Split Core Current Transformer Input 50A/100A/150A/200A Output 33mA/0.333V
Technical parameters:
Model：SCT019
Rated Input:50A/100A/150A/200A
Rated output: 33mA/0.333V
Accuracy: ±0.5%
Linearity: ≤0.2%
Phase shift: 158'
Max.samping resistance: 100Ω
Work voltage: 720V
Work frequency: 20-1KHz
Operating temperature: -25.. 70℃
Storage temperature: -40.. 85℃
Fire resistance UL94-V0
Dielectric strength(50Hz 1min): 3.5KV
Material of core: Permalloy
Mounting type: Suspension
Weight: 91g
Please note the product parameters in order remarks,thank you.

SCT027H 0-160A/40mA accuracy 3% split core current transformer AC Current sensor
Brand : YHDC
Model : SCT027H
Input current : 0-160A AC
Output current : 0-40mA AC
Ratios : 1:4000
Diameter : 27mm
Mounting type: Hands Helding
Technical data sheet of SCT027H 0-160A/40mA split core current transformer AC Current sensor
We are the manufacturer ofSCT027H 0-160A/40mA split core current transformer AC Current sensor , we have our own factory, so we can provide you OEM service / regular supply / low price and good quality, welcome to order ourSCT027H 0-160A/40mA split core current transformer AC Current sensor, my skype: transformer.yhdc / wechat : 591058117

YHDC Split core current transformer SCT027H input 50A 80A 100A 120A 160A output 0.333V Accuracy ±3 %
Brand :YHDC
Rated input: 50A 80A 100A 120A 160A
Measured range: 200A
Rated output: 0.333V
Turns ratio: 1:4000
Accuracy: ±3 %
Linearity: 1%
Flame resistance: UL94-V0
Standard: GB1208-2006
Voltage: 720V
Working temperature: -25 ℃ ~ 60 ℃
Storage temperature: -30℃～ 90℃
Frequency: 50Hz-60Hz
Dielectric strength: 3,5KV 50Hz 1min
Sampling resistance: 70Ω
Weight: 104g

THST21WA
Rated input:50A,100A,200A,300A,400A,500A AC
Rated output:0-20mA,4-20mA,0-5V,1-5V 0-10V DC
Supply voltage: 12V, 24V
Please leave your requirements of input,output,supply voltage in the order.Thanks.
50Aac input,40-20mAdc output, 24V supply voltage is in default.

Split core current transformer SCT016T 1%
Brand:YHDC
Input Current : 10A/50A/100A/120A
Measured range: 160A
Output Current: 10mA/50mA/25mA/100mA/33mA/20mA/60mA/40mA
Turns ratio: 1:1000 1:2000 1:3000 1:5000
Accuracy:  1 %
Linearity: 1%
Open Loop
Installation method: suspension
Material of core: Ferryt
Flame resistance: UL94-V0
Working voltage: ≤720V
Working temperature: -25 ℃ ~ 60 ℃
Storage temperature: -30 ℃ ~ 90 ℃
Frequency: 50 Hz ~ 1KHz
Dielectric strength: 3,5KV 50Hz 1min
Max resistance: 10Ω
Weight: 70g
Product Specification

Technical data sheet