Kategóriák

Nozzle Cup Glass Chuck Collet Coaster Welding Accessory Set For TIG WP 17 18 26
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Electrode holder for copper material, a very small amount of impurities, especially phosphorus, arsenic, aluminum, etc., will greatly reduce the conductivity of copper.
*Name: TIG Torch Accessories
*Model: 702079
*Suitable for Tig WP-17/18/26
*Type: Welding Accessories
*Scope Of Application: TIG
Package Contents:
2*#8 53N61S Alumina Nozzle Cup 12.5mm 1/2"
2*#10 Heat Resistant Glasses
2*10N24S Chucks For Argon Arc Welding Torch 2.4mm 3/32"
1*17CB20G Collet Welding Body 2.4mm 3/32"
1*18CGG Coaster
4*Temperature Resistant O-Rings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Sheath Nylon Protective sleeve Cable Hydraulic Hose Soldering Equipment
Features:
Made of high quality nylon material, wear-resisting, flame retardant.
Flexible nylon sleeve protects hose from abrasion and allows bundling of hose lines.
Perfect for plasma torch hose, stick welding cables, hydraulic hoses, wiring harnesses, and other uses.
This nylon protective sleeve is 7.5 meters long, enough to meet your need.
Brand new and high quality.
Specification:
Material: Nylon
Color: Black (As Picture Show)
Length: 7.5M / 25 foot
Width: 4cm / 1.57 inch
Diameter: 27mm / 1.06 inch
Package Contents:
One roll nylon protective sleeve
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Nylon Protective sleeve Cable Torch Hydraulic Hose Soldering Equipment
Features:
Made of high quality nylon material, wear-resisting, flame retardant.
Flexible nylon sleeve protects hose from abrasion and allows bundling of hose lines.
Perfect for plasma torch hose, stick welding cables, hydraulic hoses, wiring harnesses, and other uses.
This nylon protective sleeve is 7.5 meters long, enough to meet your need.
Brand new and high quality.
Specification:
Material: Nylon
Color: Black (As Picture Show)
Length: 7.5M / 25 foot
Width: 4cm / 1.57 inch
Diameter: 27mm / 1.06 inch
Package Contents:
One roll nylon protective sleeve
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Sheath Nylon Protective sleeve Cable Torch 4cmx27cm Soldering Equipment
Features:
Made of high quality nylon material, wear-resisting, flame retardant.
Flexible nylon sleeve protects hose from abrasion and allows bundling of hose lines.
Perfect for plasma torch hose, stick welding cables, hydraulic hoses, wiring harnesses, and other uses.
This nylon protective sleeve is 7.5 meters long, enough to meet your need.
Brand new and high quality.
Specification:
Material: Nylon
Color: Black (As Picture Show)
Length: 7.5M / 25 foot
Width: 4cm / 1.57 inch
Diameter: 27mm / 1.06 inch
Package Contents:
One roll nylon protective sleeve
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Helmet Magnifier Lens Welding 5mm x 4mm Eye protection Workshop Equipment Hot
Description:
*Good quality of welding glasses long service lifetric arc light protection eyes
*For welding cover on black glass lenses, eye protection, anti-glare, anti-ultraviolet
*It has a significant effect on the prevention of arc and peeling opacity of electric eye disease.
*Suitable for protective welding, arc welding, plasma cutting and other operators
Specification:
*Material: Glass
*Lens Size: 5 x 4mm / 0.2 x 0.16inch
*Box Size: 11 x 5.5cm / 4.33 x 2.17inch
*Diopter: 2.0/3.0
Package Contents:
2pc Magnifier Glass Lens with Box
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Sheath Nylon Protective sleeve Cable Tig Torch 4cmx27cm Black Equipment
Features:
Made of high quality nylon material, wear-resisting, flame retardant.
Flexible nylon sleeve protects hose from abrasion and allows bundling of hose lines.
Perfect for plasma torch hose, stick welding cables, hydraulic hoses, wiring harnesses, and other uses.
This nylon protective sleeve is 7.5 meters long, enough to meet your need.
Brand new and high quality.
Specification:
Material: Nylon
Color: Black (As Picture Show)
Length: 7.5M / 25 foot
Width: 4cm / 1.57 inch
Diameter: 27mm / 1.06 inch
Package Contents:
One roll nylon protective sleeve
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

2pcs Magnifier Lens Workshop Equipment Glass Helmet Welding Eye protection
Description:
*Good quality of welding glasses long service lifetric arc light protection eyes
*For welding cover on black glass lenses, eye protection, anti-glare, anti-ultraviolet
*It has a significant effect on the prevention of arc and peeling opacity of electric eye disease.
*Suitable for protective welding, arc welding, plasma cutting and other operators
Specification:
*Material: Glass
*Lens Size: 5 x 4mm / 0.2 x 0.16inch
*Box Size: 11 x 5.5cm / 4.33 x 2.17inch
*Diopter: 2.0/3.0
Package Contents:
2pc Magnifier Glass Lens with Box
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

For WP-17/18/26 Welding Torch kit Gas Cup O-rings Insulator Replacement
Details:
Material: Metal
1.6mm 1/16" TIG Welding Torch Stubby Gas Lens #12 Pyrex Cup Kit for Tig WP-17/18/26
Can be used for WP-17 WP-18 WP-26 TIG Welding Torch
Suitable for Rilon, Riland, Jasic, Mitech, Chiry, UNT, Krypton, Longetivity, Berlan and so on .
This kit fits all WP-17/18/26 series air cooled welding torches
Lincoln PTA-17 PTA-17V PTA-18 PTA-18V PTW-26 Tig Welding Torches,
Miller Diamondback DB17 DB17V DB26 DB26V DB18 Tig Welding torches
Package Contents:
1 * #12 Pyrex Glass Cup
1 * 17CB20G Collets Body Stubby Gas Lens
1 * 10N2xS Stubby Collet
6 * Temperature Resistant O-rings
1 * Gas Lens Insulator
Warm Tips:
1,Please avoid to use all kinds of transparent shield cup where there are spatter during welding job
2,Please do not knock on the transparent shield cup even if it can bear high temperature.
3,Pleas keep it in mind that all kinds of transparent shield cup needs to be used accordiing the welding range. For DC output welding,the maximum current is 170 A. For AC output welding,the maximum current is 90A.
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Head Tig torch Body Flexible Consumables Black Tool Air cooled Accessories
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*This kit is designed to fit most for WP-17F series TIG torches.
*Handy hint warm torch up before reshaping.
*Flexible design, easy to change or adapt, tough and easy to use
*Applicable Welder: Welding Tip WP-17F
*Material: Plastic Metal
*Main Color: Black (As pictures show)
*Nozzle Type: Flexible
Package Contents:
1 x Tig Welding Torch Head Body
1 x Short Back Cup
1 x Medium Back Cup
1 x Long Back Cup
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Hex Drill Bit Hexagon Metric Tap Countersink Silver Replacement Durable
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Suitable for soft tapping of metal and aluminum. wood. Plastic, etc.
*Multi-purpose drill tap deburring countersink hexagonal bit set.
*The advantages are opening, tapping and chamfering. Drilling, tapping, deburring/counterbore. Reduce processing steps and save time.
*Improve working efficiency Reverse taper taps to prevent damage to threads due to over-drilling of threaded joints. 1/4-inch hexagonal shank is quick and easy to replace.
*Self-centering point, no need for auxiliary center drill or center punch steel drill.
*Suitable for drilling wood. plastic. Fine copper. One step processing. Greatly reduce processing steps, save time and improve work efficiency
Specifications:
*Material:HSS
*Color:Silver (As Pictures Show)
*Size:As Pictures Show
*Quantily:6PCS
Package Contents:
6*Drill Bits
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

PT-31 Plasma Cutter Torch Machine Spare Nylon 197mm Nozzle Curved 2018
Features:
*PT-31 LG-40 Plasma Welding Cutting Torch Nozzle Accessory
*Bent Handle Welding & Soldering machine, plasma torch head spare parts
*Comfortable to hold, easy to use
*A perfect design for pt-31
*Made of high quality material, durable and practical to use
*100% brand new and high quality
Specifications:
*Material: Nylon
*Color: Red (As Pictures Show)
*Type: Plasma cutter
*Length: 197mm (Approx.)
*Working pressure: 0.4 mpa to 0.65 mm(Approx.)
Package Contents:
1*Cutting Torch Nozzle
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

PT-31 LG-40 Air Plasma Torch-Body Handle Cutting Torch-Head 0.4Mpa-0.65mm Newest
Features:
*PT-31 LG-40 Plasma Welding Cutting Torch Nozzle Accessory
*Bent Handle Welding & Soldering machine, plasma torch head spare parts
*Comfortable to hold, easy to use
*A perfect design for pt-31
*Made of high quality material, durable and practical to use
*100% brand new and high quality
Specifications:
*Material: Nylon
*Color: Red (As Pictures Show)
*Type: Plasma cutter
*Length: 197mm (Approx.)
*Working pressure: 0.4 mpa to 0.65 mm(Approx.)
Package Contents:
1*Cutting Torch Nozzle
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

R8 Collet HRC 55 Metric Mill Chuck Holder 65Mn Spring Steel 7/16-20UNF Thread
Features:
100% brand new and high quality
Made of high-quality materials, durable
Precision grinding to achieve close tolerances
Rectified and grated
Suitable for various milling machine spindle taper holes of R8
Used for clamping tools, replacing the spindle taper hole, easy to use, expanding the scope of use of the machine tool
Product parameters:
Clamping diameter: 5/16 inch
Pull line: 7/16-20UNF
Material: 65Mn spring steel
Hardness: HRC 55
Accuracy: 0.0005 inch (0.013 mm)
Overall length: 103 mm / 4.06 inches
Top diameter: 32 mm/1.26 inch
Bottom diameter: 24 mm/0.94 inch
Package list:
1 *Milling tool chuck holder
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Accessories Sanding Belt Replacement Making Sharpening Hogging Practical
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*1" x 30" sharpening 12 packs of abrasive belt 400 600 800 1000
Specifications:
*Name: Abrasive Belt
*Size: 1" X 30"
*Material: silicon carbide
*Granularity: Assorted
*Quantity: 12
*Details: 3 x 400 tablets, 3 x 600 tablets, 3 x 800 tablets, 3 x 1000 tablets
Package Contents:
12 *Sand belt
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Electric Repair replace Keyless Drill Chuck Clamp Keys Connetion Repair Tools
Features:*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
* A large number, complete specifications, precision manufacturing, long-term use.
Specifications:*Type: Drill Chuck
*material: metal
*Size: as shown
*Quantity: 6
*Color: as shown
Package content:1*6PCS drill chuck tool set
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

5 Flute Countersink Drill Bits High Speed Steel 6 Pcs/set Household Bit Tools
Details:
*100% brand new and high quality
*Uses: Ideal for Wooden planks, Fiberboard, Particle board, Plywood, Plastic, Alumiumn Board, etc
*Suitable for DIY, Home and General Building/Engineering Using
*Color: Gold Silver (As Pictures Show)
*Material: High Speed Steel
*Size: As Pictures Show
*6 Types: 6mm, 8mm, 9mm, 12mm, 16mm, 19mm
Package Contents:
6*Drill Bits
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Flat Sanding wheels Lock Grinding Metalworking Supplies 11pcs Portable
Features:
*100% brand new and high quality
*GET MORE CUTTING POWER: The ABN 2-Inch Angle Grinder Flap Disc 80 Grit Grinding Wheel 10-Pack is a flap wheel kit that is a blend of zirconia and aluminum oxide grain that allows the die grinder sanding disc to self-sharpen for a more powerful, abrasive cut on carbon and mild steel applications
*REDUCE VIBRATIONS: One-sided zirconia flap disc constructed from resin fiber with a fiberglass backing plate to offer extra strength and absorb vibrations without smudges or smears during use; Grinding disc is semi-open to reduce loading on aluminum surfaces
*80 GRIT TO REMOVE HEAVIER STOCK: Angle grinder sanding wheel is designed for working on flat surfaces; These 40 grit flap disc wheels are coarser in build to easily remove heavier stock, smoothing out or blending autobody paint, deburring, removing rust, leveling, stripping, buffing, light grinding, and prepping or finishing flat work surfaces such as stainless steel, aluminum, and non-ferrous metal; Avoid forcefully pushing down on flap disk to prevent wear or damage
Specifications:
*Color: Dark Blue (As Pictures Show)
*Material: a mixture of zirconia and alumina particles
*Total diameter (Approx.): 2 inches (50 mm)
*1/4" (6mm) shoulder shaft
*Maximum speed 12000 to 14000 rpm
Package Contents:
10*Sanding wheels
1*Holder
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Features:
Profiling bar for semi-finishing and finishing operations.
Bar hardness approximately 45HRC.
Extreme gloss finis.
High quality and brand new.
Specification:
Model: MGEHR1212-1.5
Material: Steel
Shank Diameter: 12mm/0.47''
Overall Length: 100mm/3.93''
Direction: Right Hand
Accept Insert: MGMN150
Package Contents:
1 * MGEHR1212-1.5 Boring Bar
1 * Wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Filter Cap Helmet Eye Welder Protector Darkening Protable High Quality
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Suitable for most kinds of welding mode.
Delay time can be selective.
The user's eyes and face a full protection against UV and IR radiation during the entire welding process,even in the clear state.
Sensitivity adjustment : you can according your working conditions choose.
Dark state Shade No: DIN9DIN13 stepless adjustment
Power Supply: Solar Cells, No Battery Change Required
Specifications:
Transition Time : ≤2ms 22 degree Celsius (72 ° F)
Delay Time(s) : <1s
Power On/Off: Fully Automatic
Rate of UV Transmittance : 313nm<0.00006% 365nm<0.00006%
Rate of IR Transmittance : 780~1300nm<0.003% 1300~2000nm<0.009%
Frame Dimensions: 11cm x 9cm x 0.9cm/ 4.33" x 3.54" x 0.35"(Approx.)
Viewable Size: 9.1cm x 4.2cm/ 3.58" x 1.65"(Approx.)
Package Contents:
1 x Solar Auto Darkening Welding Helmet Lens(Helmet Not Inclued)
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Hex Shank 7PCS Countersink Drill 1/4 Inch Sink Chamfer Cutter 6mm-19mm
Item Details:
*100% Brand new and high quality
*Material: The flute countersink drill bit set is made from standard high speed steel and super hard titanium coated bits. The automatic center punch is made of pure brass.
*Great Performance: Center hole punch creating a starting point that prevents screws and drills from wandering
*Application: Great for wooden planks, plastic, particle board, plywood, aluminum board etc.
*Features: Center punch can adjust cap to regulate striking force. Countersinking is a two-step process: pilot hole first, followed by the countersink
Specification:
*Material:high speed steel
*Total Length:13.2cm
*Specification:6mm 8mm 9mm 12mm 16mm 19mm
*Includes:6*Drill Bits 1*Center Punch
Package Contents:
1*Center Punch
6*Chamfer
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Details:
*100% Brand new and high quality
*Suitable for deburring, rust, scale, carbon removal, edge grinding, adhesion roughening, appearance finishing, cleaning / polishing
*Suitable for removing rust and paint, deburring, descaling, finishing and polishing
*Suitable for most grinding machines
*Color: Yellow(As Pictures Show)
*Material:Steel wire copper plating
*Optional Dimension:100mmx16mm/125mmx16mm/150mmx22mm/200mmx25mm/200mmx32mm/250mmx25mm/250mmx32mm (Approx.)
Package Contents:
1*Brass brush
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

12Set TIG Welding Stubby Gas Lens 10 Heat Cup Kit, For Tig WP-17/18/26.
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Electrode clip for the copper material, a very small amount of impurities, especially phosphorus,
Arsenic, aluminum, etc., will greatly reduce the copper conductivity.
Fit For Tig WP-17/18/26
Specifications:
Product Name:TIG Welding Tool Accessories
Product Type: Welding Accessories
Applicable Scope:TIG
Quantity: 12pcs/Set
Package Contents:
2 x #8 53N61S Alumina Nozzle Cups 12.5mm 1/2"
2 x #10 Heat Resistant Glass Cup
2 x 10N24S Collets For Tig Welding Torch 2.4mm 3/32"
1 x 17CB20G Collets Body For Tig Welding Torch 2.4mm 3/32"
1 x18CGG Cup Gasket
4 x Temperature Resistant O-rings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Drill Bit High quality Titanium Plating 4.5mm Shank Ceramic Wood Metal Durable
Features:
*100% brand new and high quality.
*Fits for glass, ceramic, wood, metal, plastic, tile, cement.
*It can be used with the ordinary drilling hammer.
*It must be add coolant when it is being used.
*When drilling hole, your force should be slow, especially at the beginning of drilling and when it is drilling the glass through.
Specifications:
*Material : carbide alloy
*Surface Treatment: Titanium Plating
* Head Type: Cross Spear Head
*Drill Diameter: 6mm(approximately)
*Shank Diameter: 4.5mm(approximately)
*Total Length: 72mm(approximately)
Package Contents:
10pcs Drill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Rotary Burr Carbide Burrs 1/8'' Shank Grinder Bit Tool Die Parts Durable
Details:
*100% brand new and high quality
*Easy to use, safe and reliable, can reduce labor intensity
*Great for processing Copper, Aluminum Alloy, Iron, Marble, Jade, Steel, Glass, Wood and Plaster etc
*Lasts long working life, packed with nice plastic case for safety storage and protection.High efficiency, high-quality finish, long service life, good economic returns
*Color: Silver (As Pictures Show)
*Material: Tungsten Carbide
*Shank diameter (Approx.): 3mm(1/8")
*Shank Length (Approx.): 1.38"/35mm
*Cutting edge diameter (Approx.): 0.24"/6mm
*Total length (Approx.): 1.7"-1.97"
Package Contents:
10 * Tungsten Steel Solid Carbide Burrs
1 * Storage Box
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

12pcs/Set Welding Accessories Heat Cup Gas Lens #10 Kit Welding Quality Useful
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Electrode clip for the copper material, a very small amount of impurities, especially phosphorus,
Arsenic, aluminum, etc., will greatly reduce the copper conductivity.
Fit For Tig WP-17/18/26
Specifications:
Product Name:TIG Welding Tool Accessories
Product Type: Welding Accessories
Applicable Scope:TIG
Quantity: 12pcs/Set
Package Contents:
2 x #8 53N61S Alumina Nozzle Cups 12.5mm 1/2"
2 x #10 Heat Resistant Glass Cup
2 x 10N24S Collets For Tig Welding Torch 2.4mm 3/32"
1 x 17CB20G Collets Body For Tig Welding Torch 2.4mm 3/32"
1 x18CGG Cup Gasket
4 x Temperature Resistant O-rings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Set Drill Bits Composite Tap Thread Hex Kit High Speed Steel 4341 Solid
Item Details:
*100% Brand new and high quality
*6 sizes in one drill and tap bit set (M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5) to meet your diversified requirements;
*No tool changes, good alignment and fast cycle times make this a very productive tool.
*Quick change 1/4¡± (6.35mm) hex shank with metric sizes engraved on the bits. Wide spiral flutes carry the chips out of the hole. Can be used on multi-spindle heads with reversing mechanisms for tapping in most materials
*Can be used on multi-spindle heads with reversing mechanisms for tapping in most materials.
*Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc.Note:Low Speed and Cutting holes in materials(Thickness :<3mm)
*Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc.
*Fast replacement composite cone, uses drill edged principle.
*Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency.
*Self-centering point, do not need assistant center drilling or center punching.
*High hardness, rustproof, solid and durable
Specification:
*Material: High Speed Steel 4341
*Tapping Material Type: Wood, Plastic, etc.
*Tapping Material Thickness: About 5mm
*Point Type: 135 Degree Split Point
*Shank: 6.35mm (1/4inch) Quick Change Hex
Package Contents:
6*Drill Bits
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Supplies Carbide Inserts CNC DCMT11T304-HMP PC9030 Indexable Accessories
Details:
*100% brand new and high quality.
*Model: DCMT11T304-HMP PC9030
*Material: Carbide
*Color: As Pictures Show
*Quantity: 10 pcs
Package Contents:
10*Carbide Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Lightweight Rechargeable Angle Drill Extension Bit Holder Flexible Shaft Tools
Details:
*100% brand new and high quality
*Color: As Pictures Show
*Material: Carbon steel
*Easy, lightweight and fast, connect standard hex screwdriver
*It's good for the Wrench, can be connected to drill, rechargeable drill or manual wrench
*Brilliant Design and Well-Constructed: Right Angle Attachment is a Standard 1/4" one. Helps you Out from Occasions When You Need the Power but Stuck at Full Angles
*Extension Bit is Universal in any Directions, Allows You Get into Those Difficult Places and Get the Job Done Easier and Quicker
*Not Designed for Heavy Force Drills: These Tools are Work Great for Light Drilling, Slow Speed/Screw Driving, Like Cordless Drill, Ratchet Hand Screwdriver etc, Not Compatible with Drivers Which are High Speed and Heavy Force Drills, though They are Tough for Good Torque Spin
Package Contents:
1*Bit Holder
1*Flexible Shaft
10*Bits
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

3PCS/SET T12-BC2 BL BC3 SERIES SOLDERING IRON TIPS FOR HAKKO T12 FX951 FX-952 UK
Product description:
3pcs:T12-BC2 /BL/ BC3
Model: T12 series
Input voltage: 12-24V
Maximum power: 75W
Temperature adjustment range: 0-600
Scope of application: lead-free soldering
Features of T12 soldering iron tip: The sensor is fully front-facing, and it is highly sensitive to temperature changes; the heating core is installed inside the small-volume soldering iron tip, with minimal heat loss. Two major features have achieved the extraordinary heating ability of the T12 soldering iron tip, and truly realized the fluency of lead-free soldering at a low temperature of 350 degrees.
Using refined copper as the main material, excellent thermal conductivity, special iron plating process, corrosion, oxidation resistance, and long life. Extremely strong wettability, ductility, easy soldering, round solder joints; scientific and rigorous chemical inspection, balanced inductance, and stable quality. Lead-free materials, lead-free environment manufacturing.
Package list:
3PCS:BC2 /BL/ BC3
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Accessories Flexible Shaft Bit Holder Right Angle Universal Attachment
Details:
*100% brand new and high quality
*Color: As Pictures Show
*Material: Carbon steel
*Easy, lightweight and fast, connect standard hex screwdriver
*It's good for the Wrench, can be connected to drill, rechargeable drill or manual wrench
*Brilliant Design and Well-Constructed: Right Angle Attachment is a Standard 1/4" one. Helps you Out from Occasions When You Need the Power but Stuck at Full Angles
*Extension Bit is Universal in any Directions, Allows You Get into Those Difficult Places and Get the Job Done Easier and Quicker
*Not Designed for Heavy Force Drills: These Tools are Work Great for Light Drilling, Slow Speed/Screw Driving, Like Cordless Drill, Ratchet Hand Screwdriver etc, Not Compatible with Drivers Which are High Speed and Heavy Force Drills, though They are Tough for Good Torque Spin
Package Contents:
1*Bit Holder
1*Flexible Shaft
10*Bits
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Supplies Carbide Inserts Tools Cutter 10pcs DCMT11T304-HMP PC9030 Accessories
Details:
*100% brand new and high quality.
*Model: DCMT11T304-HMP PC9030
*Material: Carbide
*Color: As Pictures Show
*Quantity: 10 pcs
Package Contents:
10*Carbide Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

M18x1.5mm HSS Metric Taper Plug Tap Set Hardeneds Steel Thread Cutter Useful
Item Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* HSS 18mmx1.5 metric taper and plug thread right hand M18x1.5mm pitch
* Strong and sturdy to use
* Total Length: 88mm(Approx.)
* Material: High-Speed Steel
* Color: Silver(As pictures show)
* Quantity: 2
Package Contents:
2 * Taps
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

6pcs M3-M10 1/4in Hot Composite Tap Thread Spiral Screw Hex HSS Screw Drill-Bit
Item Details:
*100% Brand new and high quality
*6 sizes in one drill and tap bit set (M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5) to meet your diversified requirements;
*No tool changes, good alignment and fast cycle times make this a very productive tool.
*Quick change 1/4¡± (6.35mm) hex shank with metric sizes engraved on the bits. Wide spiral flutes carry the chips out of the hole. Can be used on multi-spindle heads with reversing mechanisms for tapping in most materials
*Can be used on multi-spindle heads with reversing mechanisms for tapping in most materials.
*Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc.Note:Low Speed and Cutting holes in materials(Thickness :<3mm)
*Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc.
*Fast replacement composite cone, uses drill edged principle.
*Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency.
*Self-centering point, do not need assistant center drilling or center punching.
*High hardness, rustproof, solid and durable
Specification:
*Material: High Speed Steel 4341
*Tapping Material Type: Wood, Plastic, etc.
*Tapping Material Thickness: About 5mm
*Point Type: 135 Degree Split Point
*Shank: 6.35mm (1/4inch) Quick Change Hex
Package Contents:
6*Drill Bits
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Sanding Paper Hook & Loop Grit Grinding disc round sandpaper pad Shackle sand
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
With professional / safety / high efficiency / low consumption and other characteristics, it is suitable for grinding of rust, paint and burr on metal and non-metal materials such as furniture and automobile industries.
Uses: Widely used in the grinding and polishing of artificial stones, furniture and wood products, metals, automobiles and other items.
Specification:
Model: Hook&Loop Sanding Discs Round Sandpaper Pads
Optional Grit: 80#~2000#
Diameter: 125mm(Approx.)
Quantity: 50pcs
Package Contents:
50*Sanding Paper
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Sanding Paper Hook & Loop Grit Grinding disc round sandpaper pad Shackle sand
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
With professional / safety / high efficiency / low consumption and other characteristics, it is suitable for grinding of rust, paint and burr on metal and non-metal materials such as furniture and automobile industries.
Uses: Widely used in the grinding and polishing of artificial stones, furniture and wood products, metals, automobiles and other items.
Specification:
Model: Hook&Loop Sanding Discs Round Sandpaper Pads
Optional Grit: 80#~2000#
Diameter: 125mm(Approx.)
Quantity: 50pcs
Package Contents:
50*Sanding Paper
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Sanding Paper Hook & Loop Grit Grinding disc round sandpaper pad Shackle sand
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
With professional / safety / high efficiency / low consumption and other characteristics, it is suitable for grinding of rust, paint and burr on metal and non-metal materials such as furniture and automobile industries.
Uses: Widely used in the grinding and polishing of artificial stones, furniture and wood products, metals, automobiles and other items.
Specification:
Model: Hook&Loop Sanding Discs Round Sandpaper Pads
Optional Grit: 80#~2000#
Diameter: 125mm(Approx.)
Quantity: 50pcs
Package Contents:
50*Sanding Paper
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Sanding Paper Hook & Loop Grit Grinding disc round sandpaper pad Shackle sand
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
With professional / safety / high efficiency / low consumption and other characteristics, it is suitable for grinding of rust, paint and burr on metal and non-metal materials such as furniture and automobile industries.
Uses: Widely used in the grinding and polishing of artificial stones, furniture and wood products, metals, automobiles and other items.
Specification:
Model: Hook&Loop Sanding Discs Round Sandpaper Pads
Optional Grit: 80#~2000#
Diameter: 125mm(Approx.)
Quantity: 50pcs
Package Contents:
50*Sanding Paper
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Sanding Paper Hook & Loop Grit Grinding disc round sandpaper pad Shackle sand
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
With professional / safety / high efficiency / low consumption and other characteristics, it is suitable for grinding of rust, paint and burr on metal and non-metal materials such as furniture and automobile industries.
Uses: Widely used in the grinding and polishing of artificial stones, furniture and wood products, metals, automobiles and other items.
Specification:
Model: Hook&Loop Sanding Discs Round Sandpaper Pads
Optional Grit: 80#~2000#
Diameter: 125mm(Approx.)
Quantity: 50pcs
Package Contents:
50*Sanding Paper
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Sanding Paper Hook & Loop Grit Grinding disc round sandpaper pad Shackle sand
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
With professional / safety / high efficiency / low consumption and other characteristics, it is suitable for grinding of rust, paint and burr on metal and non-metal materials such as furniture and automobile industries.
Uses: Widely used in the grinding and polishing of artificial stones, furniture and wood products, metals, automobiles and other items.
Specification:
Model: Hook&Loop Sanding Discs Round Sandpaper Pads
Optional Grit: 80#~2000#
Diameter: 125mm(Approx.)
Quantity: 50pcs
Package Contents:
50*Sanding Paper
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Sanding Paper Hook & Loop Grit Grinding disc round sandpaper pad Shackle sand
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
With professional / safety / high efficiency / low consumption and other characteristics, it is suitable for grinding of rust, paint and burr on metal and non-metal materials such as furniture and automobile industries.
Uses: Widely used in the grinding and polishing of artificial stones, furniture and wood products, metals, automobiles and other items.
Specification:
Model: Hook&Loop Sanding Discs Round Sandpaper Pads
Optional Grit: 80#~2000#
Diameter: 125mm(Approx.)
Quantity: 50pcs
Package Contents:
50*Sanding Paper
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Sanding Paper Hook & Loop Grit Grinding disc round sandpaper pad Shackle sand
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
With professional / safety / high efficiency / low consumption and other characteristics, it is suitable for grinding of rust, paint and burr on metal and non-metal materials such as furniture and automobile industries.
Uses: Widely used in the grinding and polishing of artificial stones, furniture and wood products, metals, automobiles and other items.
Specification:
Model: Hook&Loop Sanding Discs Round Sandpaper Pads
Optional Grit: 80#~2000#
Diameter: 125mm(Approx.)
Quantity: 50pcs
Package Contents:
50*Sanding Paper
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Sanding Paper Hook & Loop Grit Grinding disc round sandpaper pad Shackle sand
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
With professional / safety / high efficiency / low consumption and other characteristics, it is suitable for grinding of rust, paint and burr on metal and non-metal materials such as furniture and automobile industries.
Uses: Widely used in the grinding and polishing of artificial stones, furniture and wood products, metals, automobiles and other items.
Specification:
Model: Hook&Loop Sanding Discs Round Sandpaper Pads
Optional Grit: 80#~2000#
Diameter: 125mm(Approx.)
Quantity: 50pcs
Package Contents:
50*Sanding Paper
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Sanding Paper Hook & Loop Grit Grinding disc round sandpaper pad Shackle sand
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
With professional / safety / high efficiency / low consumption and other characteristics, it is suitable for grinding of rust, paint and burr on metal and non-metal materials such as furniture and automobile industries.
Uses: Widely used in the grinding and polishing of artificial stones, furniture and wood products, metals, automobiles and other items.
Specification:
Model: Hook&Loop Sanding Discs Round Sandpaper Pads
Optional Grit: 80#~2000#
Diameter: 125mm(Approx.)
Quantity: 50pcs
Package Contents:
50*Sanding Paper
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Concrete Cutting discs kit Brick 36 pcs Diamond With Mandrel Cutting Sawing
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Diamond cutting discs are evenly coated with diamond particles.
*Suitable for DIY, cutting, sawing, carving, sharpening and filing hard materials, including all kinds of gems, jade, marble concrete, brick, porcelain, ceramics, epoxy resin and other hardwoods
*It may become very hot when cutting, add some water to keep it cool
Specifications:
*Material: diamond, metal
*Color:As Pictures Show
*Size:Cutting disk diameter: 35/30/25mm
Mandrel diameter: 3mm
*Quantity: 36 pc
Package Contents:
30*cutting discs
6*Phillips Mandrel
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

1x Carbon Steel SSSCR 1616H09 Lathe Cutter External Boring Tool Holder 10cm 45°
Details:
Condition: 100% brand new
Model: SSSCR 1616H09
Material: Carbon Steel
Direction: Right Hand
Tool Cutting Edge Angle: 45°
Square Shank (W*H): 16*16mm
Overall Length: 100mm
Package Contents:
1 * External Tool Holder
1 * "L" Type Wrench
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

3Pcs/set T12 Handle Series BC2 /BL/ BC3 Soldering Iron Tips For HAKKO 12-24V 75W
Product description:
3pcs:T12-BC2 /BL/ BC3
Model: T12 series
Input voltage: 12-24V
Maximum power: 75W
Temperature adjustment range: 0-600
Scope of application: lead-free soldering
Features of T12 soldering iron tip: The sensor is fully front-facing, and it is highly sensitive to temperature changes; the heating core is installed inside the small-volume soldering iron tip, with minimal heat loss. Two major features have achieved the extraordinary heating ability of the T12 soldering iron tip, and truly realized the fluency of lead-free soldering at a low temperature of 350 degrees.
Using refined copper as the main material, excellent thermal conductivity, special iron plating process, corrosion, oxidation resistance, and long life. Extremely strong wettability, ductility, easy soldering, round solder joints; scientific and rigorous chemical inspection, balanced inductance, and stable quality. Lead-free materials, lead-free environment manufacturing.
Package list:
3PCS:BC2 /BL/ BC3
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

3Pcs/Set T12 Series BC2 /BL/ BC3 Solder Tips For Hakko T12 Solder Handle 12V-24V
Product description:
3pcs:T12-BC2 /BL/ BC3
Model: T12 series
Input voltage: 12-24V
Maximum power: 75W
Temperature adjustment range: 0-600
Scope of application: lead-free soldering
Features of T12 soldering iron tip: The sensor is fully front-facing, and it is highly sensitive to temperature changes; the heating core is installed inside the small-volume soldering iron tip, with minimal heat loss. Two major features have achieved the extraordinary heating ability of the T12 soldering iron tip, and truly realized the fluency of lead-free soldering at a low temperature of 350 degrees.
Using refined copper as the main material, excellent thermal conductivity, special iron plating process, corrosion, oxidation resistance, and long life. Extremely strong wettability, ductility, easy soldering, round solder joints; scientific and rigorous chemical inspection, balanced inductance, and stable quality. Lead-free materials, lead-free environment manufacturing.
Package list:
3PCS:BC2 /BL/ BC3
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

6pcs HSS Countersink Spiral Drill Bit Set Combination Hex Shank Chamfer Durable
Features:
1. High quality and brand new.
2. Suitable for drilling, tapping and cutting on soft metals, aluminum plates, iron, etc.
3. Quickly replace the compound cone, using the principle of drilling edge.
4. Drilling and tapping, one-stop processing, greatly saving processing steps and time costs, and improving work efficiency.
5. Automatic centering, no need for auxiliary center drilling or center punching
6. High hardness, anti-rust, strong and durable.
7. Metric system: M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5
8. Material: HSS handle: 1/4 inch (6.35mm) hex handle diameter
Specification:
*Material: High speed steel
*hex handle: 6.35mm
*Specifications: M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5
Package List:
6x hex shank compound tap bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Nut Screw nut 8MM Brass Nut 48mm Total length Milling Spindle High quality
Features:
100% brand new and high quality
Made of high-quality materials, durable
Lead screw is mainly used in stepper motors, machine tools and other devices
The screws do not need to be processed, the project will be packed in a PVC pipe
Suitable for industrial automation technology, stepper motor guide; like 3D printer; engraving machine; XYZ module; slide valve; elevator.
Product parameters:
Lead screw
Material: stainless steel/aluminum
Diameter: Approximately 8mm
Pitch: about 2mm
Lead: about 2mm (single start, 2mm per revolution)
Total length: about 200mm
Horizontal bracket
Aperture: about 5mm
Total length: about 48mm
Coupling
Length: Approximately 25mm
Diameter: Approximately 18mm
how to install:
Insert the nut into the lead screw
Then install 2 installed ball bearings on both ends of the spindle
According to the size you need, measure the distance between the nut and the installed ball bearing
Place the coupling installed in the screw close to the ball bearing
Package Included:
1 * Lead screw
1 * Screw nut
2 *Horizontal support
2 *Coupling
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

For 3D Printer Screw nut Machine Spindle Nut Brass Nut T8 200MM Brand new
Features:
100% brand new and high quality
Made of high-quality materials, durable
Lead screw is mainly used in stepper motors, machine tools and other devices
The screws do not need to be processed, the project will be packed in a PVC pipe
Suitable for industrial automation technology, stepper motor guide; like 3D printer; engraving machine; XYZ module; slide valve; elevator.
Product parameters:
Lead screw
Material: stainless steel/aluminum
Diameter: Approximately 8mm
Pitch: about 2mm
Lead: about 2mm (single start, 2mm per revolution)
Total length: about 200mm
Horizontal bracket
Aperture: about 5mm
Total length: about 48mm
Coupling
Length: Approximately 25mm
Diameter: Approximately 18mm
how to install:
Insert the nut into the lead screw
Then install 2 installed ball bearings on both ends of the spindle
According to the size you need, measure the distance between the nut and the installed ball bearing
Place the coupling installed in the screw close to the ball bearing
Package Included:
1 * Lead screw
1 * Screw nut
2 *Horizontal support
2 *Coupling
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.