Kapcsolók

Features:
1. This module can convert 0-100% PWM digital signal into analog signal.
2. The input digital signal can be a 0-100% PWM signal of 3.3V level.
3. The output analog signal can be 0-5V voltage.
4. Widely used in signal interface switching of PLC, single chip or other industrial control board.
5. The power supply has reverse polarity protection function.
Specification:
1. Model: 3.3P-5V
Function: Input 0-100% PWM signal of 3.3V level, output 0-5V voltage
2. PWM Signal Receive Frequency Range: 100HZ-3KHZ (1-3KHZ is recommended)
3. Insert the pin at 5V
4. Analog Voltage Output: The following is the output voltage of 0-10V to illustrate
After power-on, when there is no input signal, the output is 0V
For the first power-up, a calibration can be done: Input a signal with 50% duty cycle and 3.3V amplitude to DIN- and DIN . The frequency is 1-3KHZ. Use a multimeter to measure two ports of AO and GND. Adjust the potentiometer on the board to make the multimeter display 5.40V. This calibrate the corresponding relation between pulse signal and this module. The resolution of this module is 0.1V. The output current capability is 10MA. If the percentage of the duty cycle is inversely related to the voltage, you can check the check box of STEP LOW, ACTIVE to set the pins of PWM output in the MACH3 software.
5. Supply Voltage: 15-30VDC (power requirement of power supply: >100MA), 12V customizable
6. Output Power: About 10MA
7. Mounting Method: 4 * M3 screw hole
Port:
1. DIN : Positive of PWM signal (For common cathode, connect it to PWM signal; For common anode, connect it to 3.3V of signal terminal)
2. DIN-: Negative of PWM signal (For common cathode, connect it to GND; For common anode, connect it to PWM signal)
3. 12-30V: Positive of power supply
4. GND: Ground of power supply
5. GND: Ground of power supply. It is connected to ground of power supply
6. AO: Output port of analog voltage (0-5V)
Package List:
1 * Digital-Analog PLC Module

Features:
1. This is a momentary switch, push and hold - ON, release - OFF.
2. Used for control in electromagnetic starter, contactor, relay and other 220V electrical circuits.
3. Made of durable material, with long lifespan.
4. With good insulation performance.
5. Quality assurance, stable and reliable.
Specification:
Model: LAY37-11M
Working Voltage: 220V
Working Current: 5A
Rated Thermal Current: 10A
Contact Resistance: 20Ω
Insulation Resistance: 20MΩ
3C Rated Voltage Range: ≥440V
Mount Hole: 22mm
Weight: Approx. 40g/1.4oz
Package List:
1 * Auto Reset Button Switch

2 PCS 5A/250V Push Button Switch Metal Button Switch 22mm Mounting Hole
Feature:1. IP65 waterproof and dustproof, suitable for various working environments.
2. Stainless steel shell gives the switch beautiful look and good touch feeling.
3. Corrosion resistant, rustproof, durable in use.
4. Rated voltage/current 250V/5A.
5. Compact and lightweight structure, easy to install and use.
Specification:
Item Type: Push Button Switch
Contact: Eco-friendly silver contact
Protection Rating: IP65
Rated Voltage Current: 5A/250V
Mount Hole: 22mm / 0.87in
Total Length: 30mm / 1.18in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:2 x Push Button Switch

Features:
1. 100% brand new and high quality.
2. This is a self-locking type button switch.
3. Adopt high quality plastic, flame retardant and high temperature resistant.
4. This switch has good insulation performance.
5. Quality assurance, stable and reliable, long lifespan.
Specification:
Model: LA38-11BNZS(LA38-11S)
Working Voltage: 220V/380V
Working Current: 10A
Rated Thermal Current: 20A
Contact Resistance: 50Ω
Insulation Resistance: 50MΩ
3C Rated Voltage Range: ≥440V
Comparative Tracking Index(CTI): ≥100
Mount Hole: 22mm
Mechanical Life: 200.000 times
Electrical Life: 100,000 times
Weight: Approx. 45g/1.6oz
Package List:
1 * Self-Locking Button Switch

Features:1. This is an aftermarket replacement part with 100% brand new and high quality.
2. Made of high quality metal material, lightweight and durable.
3. It is a necessary accessory for gasoline generator.
4. It is wear-resistant, rust-resistant and can be used for a long term.
5. The set includes a governor rod, a control spring and a throttle return spring.
Specification:Condition: 100% Brand New
Item Type: Generator parts
Material: Metal
Quantity: 3pcs/set
Package List:1 * Governor Rod
1 * Control Spring
1 * Throttle Return Spring

Features:
High-quality acrylic crystal shell, high-precision laser cutting, new structural design, reliable and beautiful.
Strong wear resistance, can effectively prevent stains and scratches.
Equipped with precision, perfect integration with the equipment, can show the charm of fashion.
Use high quality materials for safe and secure usage.
3D Cassette button, each touch can appear the sound effect of the arcade room, classic reproduction.
Each button will come with the microswitch.
Specifications:Condition: 100% Brand New
Material: ABS
Color: red, blue, yellow, white, green (optional)
Size: approx. 4*4.5*4.5cm/1.6*1.8*1.8inch
Weight: approx. 19.1g
Voltage: DC12V
Package list:
1 * Button
1 * Non-slip Nut
1 * LED Light
1 * Button Base
1 * Micro Switch

Features:
High-quality acrylic crystal shell, high-precision laser cutting, new structural design, reliable and beautiful.
Strong wear resistance, can effectively prevent stains and scratches.
Equipped with precision, perfect integration with the equipment, can show the charm of fashion.
Use high quality materials for safe and secure usage.
3D Cassette button, each touch can appear the sound effect of the arcade room, classic reproduction.
Each button will come with the microswitch.
Specifications:Condition: 100% Brand New
Material: ABS
Color: red, blue, yellow, white, green (optional)
Size: approx. 4*4.5*4.5cm/1.6*1.8*1.8inch
Weight: approx. 19.1g
Voltage: DC12V
Package list:
1 * Button
1 * Non-slip Nut
1 * LED Light
1 * Button Base
1 * Micro Switch

Features:
High-quality acrylic crystal shell, high-precision laser cutting, new structural design, reliable and beautiful.
Strong wear resistance, can effectively prevent stains and scratches.
Equipped with precision, perfect integration with the equipment, can show the charm of fashion.
Use high quality materials for safe and secure usage.
3D Cassette button, each touch can appear the sound effect of the arcade room, classic reproduction.
Each button will come with the microswitch.
Specifications:Condition: 100% Brand New
Material: ABS
Color: red, blue, yellow, white, green (optional)
Size: approx. 4*4.5*4.5cm/1.6*1.8*1.8inch
Weight: approx. 19.1g
Voltage: DC12V
Package list:
1 * Button
1 * Non-slip Nut
1 * LED Light
1 * Button Base
1 * Micro Switch

Features:
High-quality acrylic crystal shell, high-precision laser cutting, new structural design, reliable and beautiful.
Strong wear resistance, can effectively prevent stains and scratches.
Equipped with precision, perfect integration with the equipment, can show the charm of fashion.
Use high quality materials for safe and secure usage.
3D Cassette button, each touch can appear the sound effect of the arcade room, classic reproduction.
Each button will come with the microswitch.
Specifications:Condition: 100% Brand New
Material: ABS
Color: red, blue, yellow, white, green (optional)
Size: approx. 4*4.5*4.5cm/1.6*1.8*1.8inch
Weight: approx. 19.1g
Voltage: DC12V
Package list:
1 * Button
1 * Non-slip Nut
1 * LED Light
1 * Button Base
1 * Micro Switch

Description:100% brand new and high quality
Terminals: 4
Universal fitting, will fit most
Panel cut-out diameter: about 20 x 31mm
Overall : about 42 x 22 x 38mm
Switch rating: 35A 12V DC
Material: plastic, metal
LED Color: Random Color
Quantity: 1Pc
Note:Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Please understand, Thank you!
Package includes:1 x LED Fog Switch（Send By Randomly- LED Color）

Features:Easy to install for any application. Use in vehicles, boats, RV or even in your home if you require a 12V switch.
Function: On/Off
3 Terminals as shown - Easily marked for error installations
Specifications:Max Load: 20A
Operation: 10-14V
Insulation R: 500V DC 100M min
Electrical Life: 15,000 Cycles
Screw hole: roughly 1cm /- - Please do not drill your holes until you have the product in hand.
Package Include:1 x Blue LED Switch .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Description:
This is a LED power push button . It is a durable made of industrial strength copper and nickel components, and its metal button head can withstand longstanding press, pretty durable in using. It adopts rubber and hexagonal nut fixed, making it anti dust and waterproof, which is very great for outdoor use. The light of the LED power will help you navigated in the dark and give a sophisticated look. you a cheerful operation with our product.
Features:
1. Made of brass nickel plated material, strong and durable.
2. High-grade appearance and nice touch feeling.
3. Adopt rubber and hexagonal nut fixed, anti dust and waterproof, which make it great for outdoors use.
4. Copper plating silver pin terminals for good conductive properties.
5. Momentary type, push it-on, release it-off.
6. Metal button head durable for longstanding press.
Specifications:
Material: Brass nickel plated
Color: Silver
LED Color: Red, green, blue, white (optional)
Rating: 3A 12V
LED Voltage: Red LED - 2V
Green, blue, white LED - 3V
(When the voltage is higher than 2V or 3V, you need to add external resistor.)
IP Rating: IP65, IK08
Screw Thread Width: 12mm / 0.47"
Dimension: 1.3 x 2.2cm / 0.51" x 0.87"
Package Weight: Approx. 8g
Operation Type: Momentary type (push it-on, release it-off)
Wire Connection Methods:Introduction about this item by the picture.
Case 1: The LED light will turn on when pressing the button.
Case 2: The LED light will always on as it links the battery.
Package Included:
1 x LED Button
Note:
1. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Features:
1. 2 position switch, 1NO(normal open) 1NC(normal close).
2. Made of durable material, with long lifespan.
3. This switch has self-locking function.
4. With good insulation performance.
5. Quality assurance, stable and reliable.
Specification:
Model: LAY37-11X/21
Material: Plastic, Metal
Working Voltage: 220V
Working Current: 5A
Rated Thermal Current: 10A
Contact Resistance: 20Ω
Insulation Resistance: 20MΩ
3C Rated Voltage Range: ≥440V
Mount Hole: 22mm
Weight: Approx. 38g/1.34oz
Package List:
1 * Selector

Features:
1. 3 position switch, 2NO(normal open) 1NC(normal close).
2. Made of durable material, with long lifespan.
3. This switch has self-locking function.
4. With good insulation performance.
5. Quality assurance, stable and reliable.
Specification:
Model: LLAY37-20X/31
Material: Plastic, Metal
Working Voltage: 220V
Working Current: 5A
Rated Thermal Current: 10A
Contact Resistance: 20Ω
Insulation Resistance: 20MΩ
3C Rated Voltage Range: ≥440V
Mount Hole: 22mm
Weight: Approx. 39g/1.37oz
Package List:
1 * Switch

Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

Features:
Used for remote control in electromagnetic starter, contactor, relay and other electrical circuits
2 Positions switch, Contact Type:1 NC(normal close) 1 NO(normal open)
This switch is made of high quality material, with long serving life.
This selector switch has self-locking function
Great switch for replacing the broken one.
Specification:
Model: LA38-11X2
Material: Plastic,Metal
Working voltage: 220/380v
Working current: 10A
Rated heating current: 20A
Contact resistance: 50Ω
Insulation resistance: 50mΩ
3C rated voltage range: above 440V
Mounting Hole: 22mm/0.9in
Weight: Approx.48g/1.7oz
Package list:
1 x Selector Switch

Description:
This is a push button switch. It is a durable switch made of industrial strength copper and nickel components, and its metal button head can withstand longstanding press, pretty durable in using. It adopts rubber ring and hexagonal nut fixed, making it anti dust and waterproof, which is very great for outdoor use. Wish you a cheerful operation with our product.
Features:
1. Made of brass nickel plated material, strong and durable.
2. High-grade appearance and nice touch feeling.
3. Adopt rubber ring and hexagonal nut fixed, anti dust and waterproof, which make it great for outdoors use.
4. Copper plating silver pin terminals for good conductive properties.
5. Momentary type, push it-on, release it-off.
6. Great for car switch, horn switch, kill switch, warning lights, fuse holders, fuse boxes and other electric products.
Specifications:
Material: Brass nickel plated material
Color: Silver
Switch Rating: 3A 12V
IP Rating: IP65, IK08
Button Shape: Round
Screw Thread Width: 19mm / 0.75"
Dimension: 2.1 x 2.6cm / 0.83" x 1.02"
Operation Type: Momentary type (push it-on, release it-off)
Package Included:
2 x Button Switch
Note:
1. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Features:
1. This is a 2 position momentary switch, 1NO(normal open) 1NC(normal close).
2. Used for control in electromagnetic starter, contactor, relay and other electrical circuits.
3. Adopt high quality plastic, flame retardant and resistant to high temperature.
4. This switch has good insulation performance.
5. Quality assurance, stable and reliable, long lifespan.
Specification:
Model: LA38-11BX22
Working Voltage: 220V/380V
Working Current: 10A
Rated Thermal Current: 20A
Contact Resistance: 50Ω
Insulation Resistance: 50MΩ
3C Rated Voltage Range: ≥440V
Mount Hole: 22mm
Weight: Approx. 49g/1.7oz
Package List:
1 * Auto Reset Switch

Features:
1. This is a 3 position momentary switch, 2NO(normal open) 1NC(normal close).
2. Used for control in electromagnetic starter, contactor, relay and other electrical circuits.
3. Adopt high quality plastic, flame retardant and resistant to high temperature.
4. This switch has good insulation performance.
5. Quality assurance, stable and reliable, long lifespan.
Specification:
Model: LA38-20BX33
Working Voltage: 220V/380V
Working Current: 10A
Rated Thermal Current: 20A
Contact Resistance: 50Ω
Insulation Resistance: 50MΩ
3C Rated Voltage Range: ≥440V
Mount Hole: 22mm
Mechanical Life: times
Electrical Life: 500,000 times
Weight: Approx. 48g/1.7oz
Package List:
1 * Auto Reset Switch

Description:1. Universal fit all 12V SUV Van RV Boat Yatch car truck conversions.
2.It can be applied as the switches for additional electronic equipment inside and outside the car. (Such as flashing lights, chassis lights, and dome lights)
3. Easy installation. All you need is a 5/8 "hole and the switch will sit well.
4. LED all the time or only when the switch is on
5. For a load of less than 3 Amp, you do not need a relay with this switch. For a load greater than 3 amperes, we recommend using car relays
Characteristics:Material: Metal
The size of the hole required 16mm 5/8 "
Depth contact inc 35mm
Lamp type: LED
LED voltage: 12V
Contact configuration: 1NO 1NC
Operation type: Hanging
Snap type: push it (off), press again - off (on)
Package include:1 X LED push switch.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Description:
This is a LED push button switch. It is a durable switch made of industrial strength stainless steel components, and its metal button head can withstand longstanding press, pretty durable in using. It adopts rubber ring and hexagonal nut fixed, making it anti dust and waterproof, which is very great for outdoor use. The light glow of the LED will help you navigated in the dark and give a sophisticated look. Wish you a cheerful operation with our product.
Features:
1. Made of industrial strength stainless steel, strong and durable.
2. High-grade appearance and nice touch feeling.
3. Adopt rubber ring and hexagonal nut fixed, anti dust and waterproof, which make it great for outdoors use.
4. Copper plating silver pin terminals for good conductive properties.
5. Self-locking type, push it-- on, push it again--off.
6. Metal button head durable for longstanding press.
Specifications:
Material: Stainless Steel
Color: Silver
Head Shape: Flat
Emitting Type: Annular
LED Color: Red, green, blue, white (optional)
Switch Voltage: 12V
Contact Configuration: 1NO1NC
IP Rating: IP65, IK08
Screw Thread Width: 19mm / 0.75"
Dimension: 2.1 x 3.9cm / 0.79" x 1.54"
Package Weight: Approx. 18g
Operation Type: Self-locking type
Package Included:
1 x LED Button Switch
Note:
1. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Description:1. Universal fit all 12V SUV Van RV Boat Yatch car truck conversions.
2.It can be applied as the switches for additional electronic equipment inside and outside the car. (Such as flashing lights, chassis lights, and dome lights)
3. Easy installation. All you need is a 5/8 "hole and the will sit well.
4. LED all the time or only when the is on
5. For a load of less than 3 Amp, you do not need a relay with this . For a load greater than 3 amperes, we recommend using car relays
Characteristics:Material: Metal
The size of the hole required 16mm 5/8 "
Depth contact inc 35mm
Lamp type: LED
LED voltage: 12V
Contact configuration: 1NO 1NC
Operation type: Hanging
Snap type: push it (off), press again - off (on)
Package include:1 X LED push

Features:
1. This is a momentary button switch, push and hold - ON, release - OFF.
2. Used for control in electromagnetic starter, contactor, relay and other 220V electrical circuits.
3. Made of durable material, with long lifespan.
4. With good insulation performance.
5. Quality assurance, stable and reliable.
Specification:
Model: LAY37-11BN
Working Voltage: 220V
Working Current: 5A
Rated Thermal Current: 10A
Contact Resistance: 20Ω
Insulation Resistance: 20MΩ
3C Rated Voltage Range: ≥440V
Mount Hole: 22mm
Weight: Approx. 35g/1.2oz
Package List:
1 * Momentary Button Switch

This page features the 12V push button with red/green LED indicator lights. The shaped button comes equipped with a 3-prong pigtail at a length of 2.5 feet. This plugs in to your relay harness wiring kit, which allows you to on/off your fog lamps, daytime running lights, LED light bars etc. The button also comes equipped with red/green LED indicator lights for off and on, respectively.
Features:
shape push button on/off .
Come with and a 3-prong pigtail (length: 2.5 ft).
Red and green LED indicator lights for on and off.
Perfect for adding fog lamps, LED daytime running lights, LED light bars, work light, etc.
Brand new and high quality.
Specification:
Item Type: Push Button
Material: ABS
Item Color: As Pictures Shown
Package Weight: Approx. 33 g
Package Include:
1 * Push Button

Feature:1. Suitable for electrical circuit with AC 50~60Hz, 5A 250VAC, 0.4A 115VDC and below.
2. Can be used for motion control of the motion mechanism, change of direction or speed of movement, automatic control of the machine tool, limit action of the motion mechanism and control of the stroke or program.
3. Mini limit switch, compact and small size, long mechanical life.
4. Can be used with a variety of different links and heads.
5. Wiring head with cap cover screw, adjustable, built-in ground screw.
Specification:
Item Type: Limit Switch
Model: -8169
Material: Plastic Metal
AC: 250V 5A
DC: 115V 0.4A
AC Frequency: 50-60Hz
Product Size: Approx. 17.5 x 2.7 x 2.4cm / 6.9 x 1.1 x 0.9in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Limit Switch

Specification:Condition: Brand New
Head Diameter:22mm.
Button Diameter: 13mm.
Hole size required: 0.74''/19mm.
Depth inc contacts: 40mm.
Operation Type: Self-Reset Switch
Contact Configuration: 1NO 1NC.
Package List:1 * Blue LED Push Switch(Without connector)
Notes:This item does not include the blue part of the shell.
Note: Due to the light and screen difference, the item's color may be slightly different from the pictures. Please understand. Make sure you don't mind before you bid. Please allow 1-2mm differences due to manual measurement. .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:
100% Brand New Aftermarket Push Button Switch.
Made of high quality material for more durability.
Upper light is active when power is on, and lower light is active when dash light is on.
Perfect for fog lights, LED light bars, daytime running lights, strobe lights, etc.
Fit for , trucks and suvs.
Specification:Condition: 100% Brand New
Material: PVC Plastic
Color: Black
Size: As Picture Shown
Fitment:for RAVV4 2006-2011
for Camry 2011-2014
for 2012-2014
for Land Cruiser 2008-2017
for Prado 2015-up
for Hilux 2015-up
for 200-2013
for 2007-2014
for 4Runner 2003-2009
Package Weight: Approx. 25g/0.9oz
Package List:1 * Push Button Switch
Notes:1. Please kindly confirm the fitment before ordering to make sure this item is perfectly fit.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Feature:1. The limit switch is suitable for both AC and DC circuit.
2. Applicable to stroke control, direction of motion or speed change for a moving mechanism.
3. Also suitable for automatic control of the machine tool, limit action of the motion mechanism and control stroke or program.
4. All terminals are open for easy connection.
5. Small size and light weight,not occupying too much room and saves space.
Specification:
Item Type:Limit Switch
Size:17.3 x 2.7 x 2.4cm / 6.81 x 1.06 x 0.94in
AC:250V 5A 50~60Hz
DC:115V 0.4A
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Switch

Feature:1. Compact momentary tactile button switch adopts DIP packaging technology, which can be more stable use.
2. Quick response and higher sensitivity DIP button switch can be easy to use and install.
3. There are 100pcs micro button, which can be more suitable for your use needs, practical.
4. With exquisite craftsmanship, light and practical switch keeps high practical adoptability and it is durable.
5. Momentary tactile button switch's quality is guaranteed, you can use it with confidence.
Specification:
Item Type: Momentary tactile button switch
Material: Engineering plastic
Package Type: DIP
Rated Voltage: DC12V
Rated Current: 50mA
Quantity: 100PCs
Size: Approx. 6 x 6 x 17mm / 0.2 x 0.2 x 0.7in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
100 x Momentary Tactile Button Switch

Feature:1. Applicable to home appliance, security equipment, toy, electronic products, etc.
2. High mechanism design offers accurate operation and long service life.
3. Waterproof design, adapt to various working conditions.
4. Stable performance, long service life.
5. Simple structure, easy to install and use.
Specification:
Item Type: Tact Switch
Material: Plastic Metal
Size: 6x6x7.3mm
Rated Current: 0.05A DC12V
Contact Resistance: 60~70g:70~80g:80~90g
Mechanical Life: > 2 million times
Stroke: 0.3±0.1
Insulation Resistance: ≥100MΩ
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:20 x Tact Switch

Features:
1. 100% brand new and high quality.
2. This is a 2 position switch, 1NO(normal open) 1NC(normal close).
3. Adopt high quality plastic, flame retardant and resistant to high temperature.
4. This switch had good insulation performance.
5. Quality assurance, stable and reliable, long lifespan.
Specification:
Model: LAY37-11Y/21
Working Voltage: 220V
Working Current: 5A
Rated Thermal Current: 10A
Contact Resistance: 20Ω
Insulation Resistance: 20MΩ
3C Rated Voltage Range: ≥440V
Mount Hole: 22mm
Mechanical Life: 5 million times
Electrical Life: 500,000 times
Weight: Approx. 72g/2.5oz
Package List:
1 * Key Operated Switch
2 * Keys

Features:
1. 100% brand new and high quality.
2. This is a 3 position switch, 2NO(normal open) 1NC(normal close).
3. Adopt high quality plastic, flame retardant and resistant to high temperature.
4. This switch had good insulation performance.
5. Quality assurance, stable and reliable, long lifespan.
Specification:
Model: LAY37-20Y/31
Working Voltage: 220V
Working Current: 5A
Rated Thermal Current: 10A
Contact Resistance: 20Ω
Insulation Resistance: 20MΩ
3C Rated Voltage Range: ≥440V
Mount Hole: 22mm
Mechanical Life: 5 million times
Electrical Life: 500,000 times
Weight: Approx. 72g/2.5oz
Package List:
1 * Key Operated Switch
2 * Keys

Features:
Suitable for AC 50Hz (60Hz), voltage up to 380V, 220V electrical circuits.
ON pushbutton are self-locking and start, OFF pushbutton are automatic reset and stop
This pushbutton switch is made of high quality material, with long serving life. Widely used in mechanical equipment, textile machinery, etc.
This switch has great waterproof, dustproof and oil-proof performance.
Specification:
Model: KA0-5KH
Type: ON/OFF
Voltage & Current: 380V 10A: AC220V/380V 10A
Insulation resistance: 200（MΩ）
Appearance size: 90*60*60mm/3.5*2.4*2.4in
Mounting hole spacing: 78mm/3.1in
Weight: Approx.86g/3oz
Note: the mounting hole spacing is about 7.7cm, and the rear mounting location is 4*4.1* 2.5cm.
Package list:
1 x Pushbutton Switch

10Pcs SPST Toggle Switches 3 Pin 2 Position ON/OFF Toggle Switch Button 250V/15A
Feature:1. This is a single-pole single-throw ON/OFF rocker switch.
2. 3 metal pins at the bottom for easy installation.
3. Fast switching, sensitive response, high reliability.
4. Stable performance, long service life.
5. Simple structure, compact size, easy to use.
Specification:
Item Type: ON-OFF SPST Rocker Switch
Material: Plastic, Metal
Rated Voltage: AC 250V/15A, AC 125V/20A
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:10 x Rocker Switch

Features:
100% Brand New Aftermarket Push Button Switch.
Made of high quality material for more durability.
Easy installation, comes with cable for convenient operate.
Upper light is active when power is on, and lower light is active when dash light is on.
Perfect for adding fog lights, LED light bars, daytime running lights, strobe lights, etc
Fit for cars, trucks and suvs.
Specification:Condition: 100% Brand New
Material: PVC Plastic
Color: Black
Size: As Picture Shown
Fitment:for 2006-2011
for Land Cruiser 2008-2017
for Prado 2015-up
for Hilux 2015-up
for Camry 2011-2014
for 2006-2013
for Tacoma 2012-2014
for 2007-2014
for 4Runner 2003-2009
Package Weight: Approx. 28g/1oz
Package List:1 * Push Button Switch
Notes:1. Please kindly confirm the fitment before ordering to make sure this item is perfectly fit.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Features:
This is a LED illuminated rocker switch, it can works in most and others with a 12 Volt DC source.
It has a wide range of functions. For example, it can be applied as the switches for the additional electronic equipment inside & outside the car.(such as flashing lights, chassis lights, and dome lights)
Easy setup. All you need is a hole and the switch will sit in nicely, no more cut outs.
Our switch comes with a keyhole slot to prevent unwanted rotation.
LED light when turned on, SPST 2 pole design (On/Off) 3rd poles with LED to be connected to earth.
Specifications:
Material: AP66
Working Voltage: 12V 25A DC
LED Light Color: Yellow
Package Weight: approx. 40g
Connection Mode: GROUND connect to power(-), POWER connect to power( ), the middle LOAD connect to the light( )
Package Included:
4 x Rocker Switch
Note:
Easy to install, but professional installation is high recommended!

Feature:1. ON/OFF/ON, 3 position control.
2. Equipped with waterproof cover to meet daily use.
3. 3 metal pins at the bottom for easy installation.
4. Mechanical life up to 100,000 times.
5. Applicable for car, motorcycle, ship, water dispenser, etc.
Specification:
Item Type: Rocker Switch
Mounting Hole Diameter: 20mm/0.8in
Rated Voltage & Current: 10A/125V, 6A/250V
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:5 x Rocker Switch

Feature:1. Mini limit , compact size, long mechanical life.
2. Suitable for electrical circuit with AC 50~60Hz, 5A 250VAC, 0.4A 115VDC and below.
3. Can be used for motion control of the motion mechanism, change of direction or speed of movement, automatic control of the machine tool, limit action of the motion mechanism and control of the stroke or program.
4. Can be used with a variety of different links and heads.
5. Wiring head with cap cover screw, adjustable, built-in ground screw.
Specification:
Item Type: Limit
Model: -8122
Material: Plastic Metal
AC: 250V 5A
DC: 115V 0.4A
AC Frequency: 50-60Hz
Product Size: Approx. 11 x 2.7 x 2.4cm / 4.3 x 1.1 x 0.9in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Limit
Note:Please allow slight error due to manual measurement. Thanks for your understanding.

Features:
100% Brand new and high quality.
This pushbutton switch is made of high quality material, with long serving life.
It has 2 push buttons, one green( I ) is momentary push button, the red(O) is latching push button.
Wide application scope, perfect for machine tools control, such as electric tools.
Great switch for replacing the broken one.
Specifications:
Material: metal, plastic
Working voltage: 380V
Working current: 10A
Work type: self-locking, instantaneous contact type
Life: over 10000 times
Weight: 81g
Package included:
1 x Pushbutton Switch

Features:
This rocker switch can be used as headlight switch, horn switch and engine stop switch.
Contains 5pcs integrated rocker switch, meet your different need.
Made of high grade ABS plastic, waterpoof and durable for long time use.
Made by professional manufacturer, strict factory test, trustworthy quality guarantee.
Practical for use, universal fit for motorcycle, electric scooter and boat.
Specifications:Condition: 100% Brand New
Material: ABS
Color: Shwon as picture
Size: Show as Picture
Rated Current: AC 6A/10A
Rated Voltage: 250V
Package Weight: approx.37g
Fitment: For motorcycle, electric scooter and boat
Package List:5 * SPST On/Off Switch

Feature:
Ultra-high-end luxury with LED indicator light.
CE certified quality, made of environmentally friendly anti-retardant materials.
12-24V car universal voltage, suitable for conversion control car all equipment.
Output circuit protection, overload protection, reverse polarity protection, multiple protection, safety to use.
Suitable for all 12 / 24v car battery installation, such as , motorcycles, buses, boats, RVs, boats, trailers, etc.
Specification:Condition: Brand New
Material: ABS & Environmental anti-retardant materials
Color: Black
Optional LED Light Color: Blue/Red/Green
Light Quantity: 2
Size: As Picture Show
Package Weight: Approx 29g
Type: SPST
Pin: 5
Voltage/Current: 12V/20A 24V/10A
Fitment: For all 12 / 24v car battery installation, such as , motorcycles, buses, boats, RVs, boats, trailers, etc
Package List:1 * LED Light Bar Rocker
Note:1. Please allow 1-3cm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Description:
Our foot pedal switch is made of high quality plastic material, eco-friendly, durable and sturdy to use. It has a light weight and reasonable size, with this switch, it can help your hands to on work by your feet controlling the power. Nice product at a good price, worth buying!
Features:
Made of high quality plastic material, eco-friendly, durable and sturdy to use.
Easy to use. Press to turn on and maintain power, step off to turn off.
Good workmanship, momentary snap-action design can help you save much power.
Can be used by feet and help your hands to on work.
220V, 10A, with 10cm / 3.9inch power cord.
Specification:
Condition: 100% New Brand
Color: Black (Shown as picture)
Material: Plastic
Voltage: 220V / 380V
Cord: Approx 10cm / 3.9inch
Size (L x W): Approx. 100 x 61mm / 3.9 x 2.4inch
Max Height: Approx. 35mm / 1.4inch
Package Weight: Approx. 113g
Package Included:
1 x Foot Pedal Switch

Features:
1. This switch can control your motor directly, no contactor required.
2. This switch is used to switch on/off circuit in electrical circuit.
3. Screw terminals, easy to wire.
4. Made of durable material, with long lifespan.
5. This switch has good insulation performance.
Specification:
Model: BS211B
Material: Plastic, Iron
Working Voltage: AC 220V/380V
Working Current: 10A
Rated Thermal Current: 10A
Contact Resistance: 50Ω
Insulation Resistance: 50MΩ
3C Rated Voltage Range: ≥440V
Weight: Approx. 114g/4.0oz
Package List:
1 * Power Push Button Switch

Feature:1. Mini limit switch, small and lightweight, long mechanical life.
2. Suitable for electrical circuit with AC 50~60Hz, 5A 250VAC, 0.4A 115VDC and below.
3. Can be used for motion control of the motion mechanism, change of direction or speed of movement, automatic control of the machine tool, limit action of the motion mechanism and control of the stroke or program.
4. Wiring head with cap cover screw, adjustable, built-in ground screw.
5. Can be used with a variety of different links and heads.
Specification:
Item Type: Limit Switch
Model: -8107
Material: Plastic Metal
AC: 250V 5A
DC: 115V 0.4A
AC Frequency: 50-60Hz
Product Size: Approx. 13 x 2.7 x 2.4cm / 5.1 x 1.1 x 0.9in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Limit Switch

Features:
This switch is widely used in electric hand drill or other power tools.
Great to replace the old or broken one of your drill.
Speed is convenient to adjust, press down the switch button to start, the lower you press down, the speed is faster.
Easy to assemble on the electric hand drill and convenient for usage.
With small light, so it has the function of lighting.
Specifications:
Material: plastic and metal
Color: black
Maximum current: 16A
Voltage: 7.2 V - 24 V
Size: 6.5 x 4 x 1.2 cm / 2.56 x 1.57 x 0.47 inch
Package Included:
1 x Cordless Drill Speed Control Trigger Switch

Feature:1. IP65 waterproof and dustproof, suitable for various working places.
2. Stainless steel shell gives the switch beautiful appearance and good .
3. Corrosion resistant, sturdy and durable.
4. Rated voltage/current 250V/5A.
5. Compact and lightweight structure, easy to install and use.
Specification:
Item Type: Push Button Switch
Contact: Eco-friendly silver contact
Protection Rating: IP65
Rated Voltage Current: 5A/250V
Mount Hole: 22mm / 0.87in
Total Length: 29mm / 1.14in
Package List:2 x Push Button Switch

Feature:1. Self‑resetting tack switch, 100pcs of switches are available, meet your different needs.
2. High precision mechanism designs offer accurate operation and long service life.
3. Simple structure, easy to install and use, bring you convenience.
4. Widely used in printed circuit board, stable and practical.
5. Light weight and in small size, easy to store and carry.
Specification:
Condition: 100% Brand New
Item Type: Tact Switch
Material: Plastic Iron
Electrical Parameters: DC12V, 50mA
Specification: DIP Approx. 6 x 6 x 6mm / 0.2 x 0.2 x 0.2in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:100 x Tact Switch

Description:
This is a LED push button switch. It is a durable switch made of zinc alloy and plating black , and its metal button head can withstand longstanding press, pretty durable in using. It adopts rubber and hexagonal nut fixed, making it anti dust and waterproof, which is very great for outdoor use. The light of the LED will help you navigated in the dark and give a sophisticated look. you a cheerful operation with our product.
Features:
1. Made of zinc alloy and plating black , strong and durable.
2. High-grade appearance and nice touch feeling.
3. Adopt rubber and hexagonal nut fixed, anti dust and waterproof, which make it great for outdoors use.
4. Copper plating silver terminals for good conductive properties.
5. Self-locking type, push it-- on, push it again--off.
6. Metal button head durable for longstanding press.
Specifications:
Material: Zinc alloy and plating black
Color: Black
Head Shape: Flat
Pin Number: 5 Pin
Emitting Type: Annular
Terminal Type: J Pin terminal
LED Color: Red, green, blue, white (optional)
Switch Voltage: 12V
Contact Configuration: 1NO1NC
IP Rating: IP65, IK08
Screw Thread Width: 19mm / 0.75"
Dimension: 2.1 x 3.9cm / 0.83" x 1.54"
Package Weight: Approx. 13g
Operation Type: Self-locking type
Package Included:
1 x LED Button Switch
Note:
1. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Features:
1. This switch can control your motor directly, no contactor required.
2. This switch is used to switch on/off circuit in electrical circuit of AC 220V or 380V.
3. Screw terminals, easy to wire.
4. Made of durable material, with long lifespan.
5. This switch has good insulation performance.
Specification:
Model: BS216B
Material: Plastic, Iron
Working Voltage: AC 110/220/380V
Working Current: 10A
Rated Thermal Current: 10A
Contact Resistance: 50Ω
Insulation Resistance: 50MΩ
3C Rated Voltage Range: ≥440V
Weight: Approx. 132g/4.6oz
Package List:
1 * On/Off Push Button Switch

Features:
This switch is momentary type, push it-- ON, Release -- OFF
Used for remote control in electromagnetic starter, contactor, relay and other electrical circuits
Screw fixation, strong installation, stable operation
Adopted of high quality flame retardant shell, high strength, high temperature resistance, corrosion resistance
Great switch for replacing the broken one.
Specification:
Product name: LED light reset button switch
Model: LA38-11D
Operation: push it-- on, Release -- off
Contact form: 1 NO 1 NC, 2 NO and 2 NC
Voltage: 220V
Working current: 10A
CTI: ≥100
Insulation resistance: ≥50MΩ
Contact resistance: ≤50mΩ
Mounting hole: 22mm/0.9in
Weight: Approx.57g/2oz
Package list:
1 x Momentary Switch
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.