Kategóriák

Kategóriák

Munka és szerszámtartás

Aktív szűrők

  • Nincs szín - 100db rozsdamentes acélból tekercselt huzalos csavar menetes betét M3x0.5x1D

    305,00 Ft
    Description:Stainless steel thread inserts can effectively improve screw connection, greatly improving the reliability. Used in all kinds of low strength materials, thread inserts can largely improve the wear resistance performance of screw connection, and avoid thread damage.
    Features:
    Stainless steel thread inserts used in low strength materials such as aluminum, , can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition.
    Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread.
    Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resistance.
    It can prevent screw from getting loose, especially used for products requiring high coefficient of insurance.
    Easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss.
    Specifications:Material: Stainless Steel
    Size: M3(inner diameter) x 0.5(installed pitch) x 1D
    Quantity: 100pcs
    Weight: 6g(approx.)
    Package Includes:100 x Threaded Inserts
  • Nincs szín - 10db rozsdamentes acél SS304 tekercses huzalos csavarmenetbetét M20 * 2,5 * 1 D

    731,00 Ft
    Steel thread inserts can effectively improve screw connection, greatly improving the reliability. Used in all kinds of low strength materials, thread inserts can largely improve the wear resistance performance of screw connection, and avoid thread damage.
    Features:
    Steel thread inserts used in low strength materials such as aluminum, , can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition.
    Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread.
    Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resistance.
    It can prevent screw from getting loose,especially used for products requiring high coefficient of .
    Easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss.
    Specification:
    Material: Stainless steel 304
    Size (inner diameter*installed pitch*installed length) & Quantity(Optional):
    M20*2.5*1 D, 10pcs;
    M20*2.5*1.5 D, 10pcs;
    M20*2.5*2 D, 10pcs;
    M20*2.5*2.5 D, 5pcs;
    M20*2.5*3 D, 5pcs;
    Weight: 121g~264g / 4.3oz~9.3oz (approx.)
    Package list:
    1 set * Threaded Inserts
    Note: Installed length= #D means # x diameter, for example, M20*2.5*1 D has installed length = 1D = 1 x 20 = 20mm.
  • Nincs szín - 50db rozsdamentes acélból tekercselt huzalos csavar menetes betét M10 * 1,5 * 2 D

    841,00 Ft
    Steel thread inserts can effectively improve screw connection, greatly improving the reliability. Used in all kinds of low strength materials, thread inserts can largely improve the wear resistance performance of screw connection, and avoid thread damage.
    Features:
    Steel thread inserts used in low strength materials such as aluminum, , can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition.
    Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread.
    Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resistance.
    It can prevent screw from getting loose,especially used for products requiring high coefficient of .
    Easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss.
    Specification:
    Material: Stainless steel 304
    Size (inner diameter*installed pitch*installed length) & Quantity(Optional):
    M10*1.5*1 D, 50pcs;
    M10*1.5*1.5 D, 50pcs;
    M10*1.5*2 D, 50pcs;
    M10*1.5*2.5 D, 50pcs;
    M10*1.5*3 D, 50pcs;
    Weight: 91g~291g / 3.2oz~10.3oz (approx.)
    Package list:
    1 set * Threaded Inserts
    Note: Installed length= #D means # x diameter, for example, M10*1.5*1 D has installed length = 1D = 1 x 10 = 10mm.
  • Nincs szín - 50db tekercselt huzalos csavarmenetes menetbetétek M6x1.0x2.5 D hosszúságú

    885,00 Ft
    Features:
    Steel thread inserts can effectively improve screw connection, greatly improving the reliability. Used in all kinds of low strength materials, thread inserts can largely improve the wear resistance performance of screw connection, and avoid thread damage.
    Features:
    Steel thread inserts used in low strength materials such as aluminum, , can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition.
    Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread.
    Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resistance.
    It can prevent screw from getting loose,especially used for products requiring high coefficient of insurance.
    Easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss.
    Specifications:
    Material: Stainless steel 304
    Size: M6(inner diameter) x 1.0(installed pitch) x 2.5 D(installed length=2.5*6mm=15mm)
    Outer Diameter: 7.6mm(Min.); 7.9mm(Max.)
    Suitable Drill Bit Diameter: 6.3mm
    Quantity: 50pcs
    Weight: 55g(approx.)
    Package Includes:
    50 x Threaded Inserts
  • Nincs szín - 100db tekercselt huzalcsavaros menetes betét acél M6x1.0x1D hosszúságú

    930,00 Ft
    Description:Stainless steel thread inserts can effectively improve screw connection, greatly improving the reliability. Used in all kinds of low strength materials, thread inserts can largely improve the wear resistance performance of screw connection, and avoid thread damage.
    Features:
    Stainless steel thread inserts used in low strength materials such as aluminum, , can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition.
    Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread.
    Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resistance.
    It can prevent screw from getting loose, especially used for products requiring high coefficient of insurance.
    Easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss.
    Specifications:Material: Stainless Steel
    Size: M6(inner diameter) x 1.0(installed pitch) x 1D
    Quantity: 100pcs
    Weight: 40g(approx.)
    Package Includes:100 x Threaded Inserts
  • Nincs szín - 50db tekercselt huzalos csavarmenetes betét M8x1,25x1,5D hosszúságú acélból

    1 055,00 Ft
    Description:Stainless steel thread inserts can effectively improve screw connection, greatly improving the reliability. Used in all kinds of low strength materials, thread inserts can largely improve the wear resistance performance of screw connection, and avoid thread damage.
    Features:
    Stainless steel thread inserts used in low strength materials such as aluminum, , can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition.
    Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread.
    Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resistance.
    It can prevent screw from getting loose, especially used for products requiring high coefficient of insurance.
    Easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss.
    Specifications:Material: Stainless Steel
    Size: M8(inner diameter) x 1.25(installed pitch) x 1.5D
    Quantity: 50pcs
    Weight: 73g(approx.)
    Package Includes:50 x Threaded Inserts
  • Nincs szín - 1Pz Volantino Fresatura Tornio Volantino a Increspatura Con Impugnatura Girevole

    1 099,00 Ft
    1Pz Volantino Fresatura Tornio Volantino a Increspatura Con Impugnatura Girevole
    Descriptions:
    This hand wheel is rear ripple hand wheel designed, with removable revolving handle, hand wheel has screw hole for easy handle assembly. Widely used in industrial machine tools, such as milling machine, lathes, grinders etc.
    Features:Lathe milling hand wheel is made of high quality bakelite, strong insulation and durable in use.
    Hand wheel come with removable revolving handle, hand wheel has screw hole for easy handle assembly.
    Widely used in industrial machine tools, such as milling machine, lathes, grinders etc.
    Novel model, easy to move, with strong carrying capacity.
    This hand wheel is rear ripple hand wheel designed, convenient to replace the broken one of the lathe.
    Specifications:
    Type: hand wheel
    Material: bakelite
    Handle height: 50(mm)/1.97 inch
    Hand wheel height: 25 (mm)/0.98 inch
    Type:8 x 63mm/0.31 x 2.48inch
    Weight:93g
    Package Included:
    1 x hand wheel
  • Nincs szín - 150db M3-M8 rozsdamentes acél SS304 tekercses huzalcsavaros menetes betétek ÚJ

    1 457,00 Ft
    Steel thread inserts can effectively improve screw connection, greatly improving the reliability. Used in all kinds of low strength materials, thread inserts can largely improve the wear resistance performance of screw connection, and avoid thread damage.
    Features:
    Steel thread inserts used in low strength materials such as aluminum, , can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition.
    Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread.
    Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resistance.
    It can prevent screw from getting loose,especially used for products requiring high coefficient of .
    Easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss.
    Specification:
    Material: Stainless steel 304
    Size (inner diameter*installed pitch*installed length) & Quantity:
    M3*0.5*1.5D (20PCS)
    M4*0.7*1.5D (20PCS)
    M5*0.8*1.5 D (20PCS)
    M6*1*1.5D (10PCS)
    M8*1.25*1.5D (5PCS)
    M3*0.5D*3D (20PCS)
    M4*0.7*3D (20PCS)
    M5*0.8*3D (20PCS)
    M6*1*3D (10PCS)
    M8*1.25*3D (5PCS)
    Weight: 110g / 3.9oz (approx.)
    Package list:
    150 * Threaded Inserts
    Note: Installed length= #D means number x diameter, for example, M3*0.5*1.5D has installed length = 1.5D = 1.5 x 3 = 4.5mm.
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
  • Nincs szín - Hex Collet Chuck Block ER25 eszköz CNC eszterga gravírozó géphez

    3 933,00 Ft
    Feature:1. Through hole allows the machining of long parts.
    2. Used for quick setup on CNC machine tools.
    3. Made of hard steel material, sturdy and durable in use.
    4. High strength and hardness.
    5. Professional manufacturing, high machining accuracy.
    Specification:
    Item Type: Hex ER25 Collet Block
    Model: ER-25
    Material: Hard Steel
    Color: Silver and Black
    Outer Diameter: 42mm/1.65in
    Inner Diameter: 18mm/0.72in
    Item Size: Approx 6.8x4.2x4.2cm / 2.68x1.65x1.65in
    Item Weight: Approx 347g
    Package Weight: Approx 364g
    Package Size: Approx 7.5x4.5x4.5cm / 2.95x1.77x1.77in
    Package List:1 x Hex ER25 Collet Block
  • Nincs szín - 10x HSS egyenes furathúzó gépvágó 3/4/5/6/7/8/9/10/11 / 12mm

    4 363,00 Ft
    Features:
    Made from high steel, these reamer cutters have high hardness.
    cutting-edge, high cutting ability, high accuracy, long service life.
    Applicable for reaming to mold processing and handicraft processing.
    Widely used for bore machining, installed in drilling machine, milling machine, etc.
    Processed surface of iron, plastic, wood, copper, aluminum and other soft materials.
    Specifications:Material: High Steel
    Shank Diameter: 3/4/5/6/7/8/9/10/11/12mm
    Precision:
    Quantity: 10pcs
    Weight: 380g(approx.)
    Packaging Includes:10pcs x Machine Reamers
  • Nincs szín - 100L-es collet egyenes szárú tokmányos CNC marószerszám-hosszabbító eszterga rúd

    4 824,00 Ft
    Features:
    Application for small space cooling, air cooling dehumidification, semiconductor refrigeration learning , etc.
    Simple operation, good practicability.
    Cooling quickly, outstanding effect.
    Refrigeration effect depends on the size of the cooling space, ambient temperature, heat insulation, ability, etc.
    Semiconductor coolers are a form of state cooling that incorporates both semiconductor Technologies and electronic assembly techniques.
    Specifications:
    Working current: 6A
    Working voltage: 12V
    Can also use 12V 10A power supply, fast.
    Power: 72w
    Size: 175 * 100 * 98 mm/6.88 * 3.93 * 3.85inch
    Package Included:
    1 x Semiconductor Refrigeration
  • Nincs szín - Z010M 200 mm Scivolo a króm fémmetszetben Per asse tornio X / Y / Z

    6 583,00 Ft
    Z010M 200mm Scivolo a croce in metallo industria Per asse tornio X / Y / Z
    Features:
    1. 100% brand new and high quality
    2. Made of iron and aluminium alloy material, durable to use.
    3. Small body and great performance.
    4. The maximum stroke can be 200mm
    5. Used for X-axis, Z-axis and Y-axis machining
    Specification:
    Condition: 100% Brand New
    Model: Z010M
    Material: Iron Aluminium Alloy
    Maximum Stroke: 200mm
    Weight: Approx. 567g / 20.0oz
    Size: Approx. 23 * 5 * 5cm / 9.1 * 2.0 * 2.0in
    Package List:
    1 * Metal Cross Slide
  • Nincs szín - BT40â € &*39 ER20â €&*39 100 tokos tokmányszerszám CNC esztergagép-maráshoz

    7 076,00 Ft
    Feature:1. Made of 40cr alloy steel, the product can withstand high pressure and explosion.
    2. The collect chuck tool is featured with quality assurance, long service life.
    3. With excellent price and high cost performance, the product is a good choice for you.
    4. The tool is characterized by high accuracy and excellent performance.
    5. You can use this collect chuck tool on various kinds of CNC milling machines.
    Specification:
    Item Type: Collet chuck tool .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
    Model: BT40-ER20-100
    Clamping Range: Approx. 1-13mm / 0.04-0.5in
    L Length: Approx.100mm / 3.9in
    Material: 40cr
    Package List:1 x Collet Chuck Tool
  • Nincs szín - SANOU K11-80 80 mm átmérőjű 3 pofás önközpontú eszterga tokmány CNC marógéphez

    13 139,00 Ft
    Features:
    100% brand new and high quality.
    The 3-Jaw self-centering chuck features short cylindrical center mounting.
    Semi-steel chuck body is made from high quality cast iron, durable in use.
    This is a chuck that can be used to extend the machine functions.
    Both side of jaw teeth and guides are ground and hardened to HRC58-62.
    Specifications:
    Model: k11 80
    Chuck type: three jaw chuck
    Power type: manual
    Chuck diameter: 80mm / 3.15in
    Weight: 1821g
    Package included:1 x Lathe Chuck
    3 x jaws
    1 x wrench
    3 x screw
    3 x nut
  • Nincs szín - ER32 tokos tokmánykészlet MT2 szárfogantyú tartó villáskulcs MT2 szártartóval

    15 859,00 Ft
    Features:
    Made of high quality alloy spring steel, they are stable in performance.
    Fine workmanship, good elasticity, high precision, big clamping force.
    This set comes with a MT2 shank holder and a wrench for easy use.
    Collets, holder and wrench are all well packed in a portable protective box.
    Widely used for CNC milling lathe tool and work-holding engraving machine.
    Specifications:
    Model: MT2-ER32
    Main Material: Alloy spring steel
    ER32 Collet: 3-2,4-3,(5-4)*2,8-7,10-9,12-11,14-13,16-15,18-17,20-19
    ER32 Collet Size(D x H): 5 x 12.5cm/2 x 4.9in
    ER32 Collet Chuck Handle Diameter: 15.1mm/0.6in
    Wrench Length: 20.5cm/8in
    Box Size: 33.5 x 28 x 9cm/13.2 x 11 x 3.5in
    Weight: 3.5kg(approx.)
    Package Includes:
    1 x Storage Box
    1 x MT2 Shank Holder (The Rod Head Color Will Be Black or White Random Shipping)
    1 x Wrench
    11 x ER32 Collets
  • Nincs szín - SANOU K11-100 MANDRINO AUTOCENTRANTE KIT TORNIO 3 3 GRIFFE ø 100MM

    17 758,00 Ft
    SANOU K11-100 MANDRINO AUTOCENTRANTE KIT PER TORNIO 3 3 GRIFFE Ø 100MM
    Features:
    100% brand new and high quality.
    The 3-Jaw self-centering chuck features short cylindrical center mounting.
    Semi-steel chuck body is made from high quality cast iron,durable in use.
    This is a chuck that can be used to extend the machine functions.
    Both side of jaw teeth and guides are ground and hardened to HRC58-62.
    Specifications:
    Model: k11 100
    Chuck type: three jaw chuck
    Power type: manual
    Chuck diameter: 100mm / 3.94in
    Weight: 3181g
    Package included:1 x Lathe Chuck
    3 x jaws
    1 x wrench
    3 x screw
  • Nincs szín - SANOU K72-100 Mandrino Indipendenti reversibile Tornio 4 Griffe ø 100mm - IT

    18 299,00 Ft
    Features:
    High precision short cylindrical center mounting.
    The chuck base is made of high quality material, hardened and durable in use
    Flimsy parts are specifically engineered by quenching, for greater durability and extended life.
    Adjusted independently to center, suitable for processing special with superior gripping force.
    4-jaw design, independent and reversible, widely used for woodworking lathe.
    Specifications:Brand: SANOU
    Model: k72-100
    Chuck Type: 4-jaw chuck
    Power Type: Manual
    Chuck Diameter: Approx. 100mm/3.9in
    Bore Diameter: Approx. 25mm/1in
    Clamping Range:
    Internal Jaw: 6-45mm
    External Jaw: 40-100mm
    Weight: Approx. 3258g / 114.9oz
    Package List:1 x 4-jaw chuck
    1 x Wrench
    4 x Screws
  • Nincs szín - SANOU K12-100 Mandrino Autocentrante Per Tornio 4 4 Griffe ø 100mm

    21 097,00 Ft
    SANOU K12-100 Precision Mandrino Autocentrante Per Tornio 4 4 Griffe ø 100mm
    Features:
    High strength and hardness.
    The compact chuck is small volume, easy to be used.
    It has a high centering precision as well as a large clamping range.
    The chuck is made for meter machine tools in the processing of non-ferrous metals non-metals like plastic and so on.
    4-jaw design, self-centering, widely used for woodworking lathe.
    Specifications:Model: K12-100
    Material: Metal
    Chuck Type: 4-jaw chuck
    Chuck Structure: Normal
    Power Type: Manual
    Speed: 4200RPM
    Chuck Diameter: 100mm / 3.93inch
    Weight: 3499g(approx.)
    Package included:1 x Lathe Chuck
    4 x Spare Jaws
    1 x Wrench
    3 x screws
  • Nincs szín - Metallo Rotante Tornio Macchina Lavorazione Legno Plastica Metallo 60W barkácsolás

    42 064,00 Ft
    Mini Metallo Rotante Tornio DIY Macchina Lavorazione Legno Plastica Metallo 60W
    Features:
    Machine tool with powerful motor, the motor box and spindle box for conjoined structure.
    Main parts: such as the spindle box, tailstock, long stand, size slider, motor blade, gear, connecting block are made of metal materials, with belt protection cover.
    Center height is 75mm and distance between centers is 135mm, motor speed normally drops to 2000rpm when using the lathe to machine metal.
    Maximum motor power is 60W by using more powerful motor.
    Turning tool is high - speed steel material, can process soft, non - ferrous, precious metals. By using central block, the diameter can be expanded to 50mm.
    Specification:Condition: 100% brand new
    Metal: Metal
    Weight: 4990g/176oz
    Motor Speed: 12000rpm
    Input Voltage/Current/Power: 12V DC/5A/60W
    X-Axis travel: 32mm
    Z-Axis travel: 145mm
    Max Diameter of Machined Material: 100mm
    Length of Machined Material: 135mm
    Machining Accuracy: 0.07mm
    Package Includes:1 x Mini Lathe
  • Nincs szín - Mini Metallo Rotante Tornio barkácsolás a Legno Plastica Metallo 60W Pro termékhez

    50 089,00 Ft
    Mini Metallo Rotante Tornio DIY per Lavorazione Legno Plastica Metallo 60W Pro
    Features:
    Main parts: headstock, tailstock, long machine bed, big slider, small slider, motor blade, gear, connection block, belt cover etc. All of the parts are made of metal except belt cover.
    Maximum motor power is 60W by using more powerful motor.
    Motor case and headstock are jointed. Axis Z slider can spin 180°.
    Center height is 75mm and distance between centers is 135mm, motor speed normally drops to 2000rpm when using the lathe to machine metal.
    Lathe tool is made of high speed steel material, which can machine soft metal, nonferrous metal and precious metal. By using central block, the diameter can be expanded to 50mm.
    With 0.02mm accuracy of scale lines, the hand wheel increases the precision of workpiece machining.
    Specification:
    Motor Speed: 12000rpm
    Input Voltage/Current/Power: 12V DC/5A/60W
    Axis X travel: 32mm
    Axis Z travel: 145mm
    Max Diameter of Machined Material: 100mm
    Length of Machined Material: 135mm
    Machining Accuracy: 0.05mm
    Working Material: Lignin plastic, soft metal (gold, silver, copper, aluminum etc.), plexiglass, plastic
    Package Weight: Approx. 5.35kg/188.7oz
    Package list:
    1 * Mini Rotating Lathe
  • Nincs szín - CNC ER11 tokmány 65Mn rögzítő tartozék pótrész

    599,00 Ft
    Spring collet CNC ER11 Chuck 65Mn Clamping Accessory Replacement Parts
    Features:
    *100% brand new and high quality
    *Made of high quality material, durable and practical to use
    *Used for CNC milling machine lathe and workpiece clamping engraving machine
    *Good elasticity and high precision
    *Using high quality spring steel is table in perfomance
    Specifications:
    *Model: ER11 1/8''
    *Material: 65Mn
    *Accuracy: <0.012
    *Height: 0.68''(Approx.)
    *Outer diameter: 0.45'' / 11mm(Approx.)
    Package Contents:
    1*CNC ER11 Chuck
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • Nincs szín - 3,175 mm 1/8 &quot ER11 rugós tokmány tokmány szerszámtartó az eszterga marásához

    610,00 Ft
    3.175mm 1/8 '' ER11 Spring Collet Chuck Tool Bit Holder For Milling Lathe Hot
    Features:
    *100% brand new and high quality
    *Made of high quality material, durable and practical to use
    *Used for CNC milling machine lathe and workpiece clamping engraving machine
    *Good elasticity and high precision
    *Using high quality spring steel is table in perfomance
    Specifications:
    *Model: ER11 1/8''
    *Material: 65Mn
    *Accuracy: <0.012
    *Height: 0.68''(Approx.)
    *Outer diameter: 0.45'' / 11mm(Approx.)
    Package Contents:
    1*CNC ER11 Chuck
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • Nincs szín - ER11 A típusú szorítóanya-tartó az ER-maró marásához CNC tokmány legújabb tartós

    627,00 Ft
    ER11 A Type Clamping Nut Collet For ER Collet Milling CNC Chuck Latest Durable
    Features:
    *ER11 A Type Collet Clamping Nut For ER Collet Milling CNC Chuck holder Lathe Tool Engraving Machine.
    *Widely used in drilling, boring, milling, tapping, carving, CNC router lathe, etc.
    *Hardened and precision ground.
    *High strength and hardness.
    *Durable in use.
    *100% Brand New and high quality.
    Specifications:
    *Model: ER11 A
    *Material: 40CR steel
    *Color: Black(As pictures show)
    *Weight: 45g(Approx)
    Package Content:
    1*Collet Clamping Nut
    Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
  • Nincs szín - CNC ER11 tokmány tartozék csere maró esztergagép

    632,00 Ft
    CNC ER11 Chuck Accessory Replacement Milling Lathe Metalworking Machine
    Features:
    *100% brand new and high quality
    *Made of high quality material, durable and practical to use
    *Used for CNC milling machine lathe and workpiece clamping engraving machine
    *Good elasticity and high precision
    *Using high quality spring steel is table in perfomance
    Specifications:
    *Model: ER11 1/8''
    *Material: 65Mn
    *Accuracy: <0.012
    *Height: 0.68''(Approx.)
    *Outer diameter: 0.45'' / 11mm(Approx.)
    Package Contents:
    1*CNC ER11 Chuck
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • Nincs szín - 27 * 10 mm-es router bit tokmánycsiszoló gép befogó gravírozó pneumatikus eszközök

    664,00 Ft
    27*10mm Router Bits Chuck Grinding Machine Clamping Engraving Pneumatic Tools
    Details:
    *100% brand new and high quality
    *Suitable for all kinds of grinding machine clamping grinding head
    *Ideal for tire repair and grinding
    *Color: Black (As Pictures Show)
    *Material: Alloy
    *Size: 27 * 10mm (approx)
    *Chuck size: 6mm, 3mm (approx)
    Package Contents:
    2*Chuck (3mm 6mm)
    Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
  • Nincs szín - 7db ER11 és tokos tokmányrugó és készlet CNC maró és gravírozó gépekhez Eszterga eszköz

    666,00 Ft
    7Pcs ER11&Collets Chuck Spring&Sets For CNC Mill&Engraves Machines Lathe Tool
    Features:
    *100% brand new and high quality
    *Made of high quality material, durable and practical to use
    *Used for CNC milling machine lathe and workpiece clamping engraving machine
    *Good elasticity and high precision
    *Using high quality spring steel is table in perfomance
    Specifications:
    *Model: ER11 1/8''
    *Material: 65Mn
    *Accuracy: <0.012
    *Height: 0.68''(Approx.)
    *Outer diameter: 0.45'' / 11mm(Approx.)
    Package Contents:
    1*CNC ER11 Chuck
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • Nincs szín - Collet tokmánybefogás fúrási menetfúrás Gravírozás rugós acél praktikus

    776,00 Ft
    Collet Chuck Clamping Drilling Tapping Engraving Spring steel Practical
    Features:
    * 100% brand new and high quality
    * Made of high quality material, durable and practical to use
    * Product selection, high quality spring steel lasting
    * Large clamping force, wide clamping range and high precision
    * Wide range of applications, such as boring, milling, drilling, tapping, engraving, CNC and other processing.
    Specification:
    * Name: 2pcs of ER11 Spring Chuck
    * Model: 438484
    * Material: Spring Steel
    * Size
    1/8: 3.175 mm(Approx.)
    1/4: 6.35 mm(Approx.)
    * Total Length: 18 mm(Approx.)
    How To Use:
    1. Insert the tip into the pressure cap and gently turn the holder until the pressure cap is eccentrically fixed.
    The groove pushes the hard holder evenly in the direction of the arrow, and the internal pressure cap can be installed.
    2. The pressure cap with the retainer is mounted on the spindle or chuck body, behind the cylindrical tool handle
    Wipe the clamped hole and tighten the pressure cap with a wrench until the date the tool clip is in use before the prison.
    (Note: Do not in the tool, avoid tightening the pressure cap to avoid damage to the holder)
    3. Use a wrench to loosen the ATC from the chuck and tool and remove the tool. The direction of the arrow is fixed.
    Pushing hard to exit, then you need to put the holder on another aperture.
    Package Contents:
    2*ER11 Collets
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • Nincs szín - Gyűjtő tokmány CNC 2db ER11 készlethez CNC eszterga szorító fúró gravírozás

    779,00 Ft
    Collet Chuck For CNC 2pcs ER11 Set CNC Lathe Clamping Drilling Engraving
    Features:
    * 100% brand new and high quality
    * Made of high quality material, durable and practical to use
    * Product selection, high quality spring steel lasting
    * Large clamping force, wide clamping range and high precision
    * Wide range of applications, such as boring, milling, drilling, tapping, engraving, CNC and other processing.
    Specification:
    * Name: 2pcs of ER11 Spring Chuck
    * Model: 438484
    * Material: Spring Steel
    * Size
    1/8: 3.175 mm(Approx.)
    1/4: 6.35 mm(Approx.)
    * Total Length: 18 mm(Approx.)
    How To Use:
    1. Insert the tip into the pressure cap and gently turn the holder until the pressure cap is eccentrically fixed.
    The groove pushes the hard holder evenly in the direction of the arrow, and the internal pressure cap can be installed.
    2. The pressure cap with the retainer is mounted on the spindle or chuck body, behind the cylindrical tool handle
    Wipe the clamped hole and tighten the pressure cap with a wrench until the date the tool clip is in use before the prison.
    (Note: Do not in the tool, avoid tightening the pressure cap to avoid damage to the holder)
    3. Use a wrench to loosen the ATC from the chuck and tool and remove the tool. The direction of the arrow is fixed.
    Pushing hard to exit, then you need to put the holder on another aperture.
    Package Contents:
    2*ER11 Collets
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • Nincs szín - ER11 1/4 &quot 1/8&quot hüvelykes rugófogó CNC maró esztergagép szerszámokhoz

    796,00 Ft
    ER11 1/4" 1/8" Inch Spring Collet For CNC Milling Lathe Tools Spring Steel Set
    Features:
    * 100% brand new and high quality
    * Made of high quality material, durable and practical to use
    * Product selection, high quality spring steel lasting
    * Large clamping force, wide clamping range and high precision
    * Wide range of applications, such as boring, milling, drilling, tapping, engraving, CNC and other processing.
    Specification:
    * Name: 2pcs of ER11 Spring Chuck
    * Model: 438484
    * Material: Spring Steel
    * Size
    1/8: 3.175 mm(Approx.)
    1/4: 6.35 mm(Approx.)
    * Total Length: 18 mm(Approx.)
    How To Use:
    1. Insert the tip into the pressure cap and gently turn the holder until the pressure cap is eccentrically fixed.
    The groove pushes the hard holder evenly in the direction of the arrow, and the internal pressure cap can be installed.
    2. The pressure cap with the retainer is mounted on the spindle or chuck body, behind the cylindrical tool handle
    Wipe the clamped hole and tighten the pressure cap with a wrench until the date the tool clip is in use before the prison.
    (Note: Do not in the tool, avoid tightening the pressure cap to avoid damage to the holder)
    3. Use a wrench to loosen the ATC from the chuck and tool and remove the tool. The direction of the arrow is fixed.
    Pushing hard to exit, then you need to put the holder on another aperture.
    Package Contents:
    2*ER11 Collets
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • Nincs szín - 2 * ER11 1/4 &quot 1/8&quot hüvelykes hüvely CNC maró eszterga szerszám alkatrész készlet készlethez

    796,00 Ft
    Features:
    * 100% brand new and high quality
    * Made of high quality material, durable and practical to use
    * Product selection, high quality spring steel lasting
    * Large clamping force, wide clamping range and high precision
    * Wide range of applications, such as boring, milling, drilling, tapping, engraving, CNC and other processing.
    Specification:
    * Name: 2pcs of ER11 Spring Chuck
    * Model: 438484
    * Material: Spring Steel
    * Size
    1/8: 3.175 mm(Approx.)
    1/4: 6.35 mm(Approx.)
    * Total Length: 18 mm(Approx.)
    How To Use:
    1. Insert the tip into the pressure cap and gently turn the holder until the pressure cap is eccentrically fixed.
    The groove pushes the hard holder evenly in the direction of the arrow, and the internal pressure cap can be installed.
    2. The pressure cap with the retainer is mounted on the spindle or chuck body, behind the cylindrical tool handle
    Wipe the clamped hole and tighten the pressure cap with a wrench until the date the tool clip is in use before the prison.
    (Note: Do not in the tool, avoid tightening the pressure cap to avoid damage to the holder)
    3. Use a wrench to loosen the ATC from the chuck and tool and remove the tool. The direction of the arrow is fixed.
    Pushing hard to exit, then you need to put the holder on another aperture.
    Package Contents:
    2*ER11 Collets
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • 5mm - Rugós rögzítő tokmány befogó anyák CNC marás gravírozáshoz

    798,00 Ft
    Spring collet Chuck Clamping Nuts For CNC Milling Engraving Industrial
    Features:
    *100% brand new and high quality
    *Made of high quality material, durable and practical to use
    *ER11 chuck clamping nut lathe parts for CNC milling machine engraving machine
    *The preferred spring steel material has high hardness, high strength and strong toughness.
    *Large clamping force, wide clamping range and high precision.
    *Widely used in the fields of boring, milling, drilling, wire tapping, engraving, etc.
    *Carefully handle the various details of the product to ensure the stability and accuracy of the product.
    *Can replace old parts very well.
    Specification:
    *Product Type: ER11 Chuck Nut
    *Material: Spring Steel
    *Model: ER11
    *Optional Chuck Size: 6mm, 5mm, 4mm, 3.175mm
    Package Contents:
    1 * Nut
    1 * Chuck
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • 3,175 mm - Rugós rögzítő tokmány befogó anyák CNC marás gravírozáshoz

    798,00 Ft
    Spring collet Chuck Clamping Nuts For CNC Milling Engraving Industrial
    Features:
    *100% brand new and high quality
    *Made of high quality material, durable and practical to use
    *ER11 chuck clamping nut lathe parts for CNC milling machine engraving machine
    *The preferred spring steel material has high hardness, high strength and strong toughness.
    *Large clamping force, wide clamping range and high precision.
    *Widely used in the fields of boring, milling, drilling, wire tapping, engraving, etc.
    *Carefully handle the various details of the product to ensure the stability and accuracy of the product.
    *Can replace old parts very well.
    Specification:
    *Product Type: ER11 Chuck Nut
    *Material: Spring Steel
    *Model: ER11
    *Optional Chuck Size: 6mm, 5mm, 4mm, 3.175mm
    Package Contents:
    1 * Nut
    1 * Chuck
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • 4mm - Rugós rögzítő tokmány befogó anyák CNC marás gravírozáshoz

    798,00 Ft
    Spring collet Chuck Clamping Nuts For CNC Milling Engraving Industrial
    Features:
    *100% brand new and high quality
    *Made of high quality material, durable and practical to use
    *ER11 chuck clamping nut lathe parts for CNC milling machine engraving machine
    *The preferred spring steel material has high hardness, high strength and strong toughness.
    *Large clamping force, wide clamping range and high precision.
    *Widely used in the fields of boring, milling, drilling, wire tapping, engraving, etc.
    *Carefully handle the various details of the product to ensure the stability and accuracy of the product.
    *Can replace old parts very well.
    Specification:
    *Product Type: ER11 Chuck Nut
    *Material: Spring Steel
    *Model: ER11
    *Optional Chuck Size: 6mm, 5mm, 4mm, 3.175mm
    Package Contents:
    1 * Nut
    1 * Chuck
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • 6mm - Rugós rögzítő tokmány befogó anyák CNC marás gravírozáshoz

    798,00 Ft
    Spring collet Chuck Clamping Nuts For CNC Milling Engraving Industrial
    Features:
    *100% brand new and high quality
    *Made of high quality material, durable and practical to use
    *ER11 chuck clamping nut lathe parts for CNC milling machine engraving machine
    *The preferred spring steel material has high hardness, high strength and strong toughness.
    *Large clamping force, wide clamping range and high precision.
    *Widely used in the fields of boring, milling, drilling, wire tapping, engraving, etc.
    *Carefully handle the various details of the product to ensure the stability and accuracy of the product.
    *Can replace old parts very well.
    Specification:
    *Product Type: ER11 Chuck Nut
    *Material: Spring Steel
    *Model: ER11
    *Optional Chuck Size: 6mm, 5mm, 4mm, 3.175mm
    Package Contents:
    1 * Nut
    1 * Chuck
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • Nincs szín - Collet tokmányos metszet 18 mm-es alkatrészek CNC 2db ER11 438484 CNC szerszámokhoz

    802,00 Ft
    Collet Chuck Tapping Engraving 18mm Parts For CNC 2pcs ER11 438484 CNC Tools
    Features:
    * 100% brand new and high quality
    * Made of high quality material, durable and practical to use
    * Product selection, high quality spring steel lasting
    * Large clamping force, wide clamping range and high precision
    * Wide range of applications, such as boring, milling, drilling, tapping, engraving, CNC and other processing.
    Specification:
    * Name: 2pcs of ER11 Spring Chuck
    * Model: 438484
    * Material: Spring Steel
    * Size
    1/8: 3.175 mm(Approx.)
    1/4: 6.35 mm(Approx.)
    * Total Length: 18 mm(Approx.)
    How To Use:
    1. Insert the tip into the pressure cap and gently turn the holder until the pressure cap is eccentrically fixed.
    The groove pushes the hard holder evenly in the direction of the arrow, and the internal pressure cap can be installed.
    2. The pressure cap with the retainer is mounted on the spindle or chuck body, behind the cylindrical tool handle
    Wipe the clamped hole and tighten the pressure cap with a wrench until the date the tool clip is in use before the prison.
    (Note: Do not in the tool, avoid tightening the pressure cap to avoid damage to the holder)
    3. Use a wrench to loosen the ATC from the chuck and tool and remove the tool. The direction of the arrow is fixed.
    Pushing hard to exit, then you need to put the holder on another aperture.
    Package Contents:
    2*ER11 Collets
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • Nincs szín - Gravírozás rugós reteszelő felszerelés rugós acél tokmány 2db 1/4 1/8 hüvelyk hasznos

    807,00 Ft
    Engraving Spring collet Equipment Spring Steel Chuck 2pcs 1/4 1/8 Inch Useful
    Item Details:
    * 100% brand new and high quality
    * Made of high quality material, durable and practical to use
    * 2pcs ER11 1/4 1/8 inch spring collet kit for CNC milling machine lathe tool
    * Product selection, high quality spring steel, long lasting
    * Large clamping force, large clamping range and high accuracy.
    * Wide range of applications such as boring, milling, drilling, tapping, engraving, CNC and other machining.
    * Applicable to: boring, milling, drilling, tapping, engraving, CNC, spindle machine tools and other processing.
    * Material: Spring Steel
    * Size: 1/8: 3.175mm, 1/4: 6.35mm(Approx.)
    * Total Length: 18mm(Approx.)
    How To Use:
    1. Insert the tip into the pressure cap, gently turn the retainer until the pressure cap eccentric retainer portion recessed along the direction
    of the arrow evenly push hard retainer, you can mount the internal pressure cap.
    2. The pressure cap with retainer mounted together on a spindle or chuck body, the cylindrical tool shank after wiping loaded clamping hole, use a
    -wrench to tighten the pressure cap even force until the date before the tool folder in prison use.
    (Note: not in the tool and avoid tightening pressure cap installed to avoid damage to the retainer)
    3. ATC with a-wrench loosen pressure cap out of the chuck and the tool, remove the tool, retainer direction of the arrow push hard to quit, and then
    need to put on retainer to the other aperture.
    Package Contents:
    2 * ER11 Collets
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • Nincs szín - 20 * M4x10mm torx csavarok cseréje keményfém betétek eszterga eszközéhez

    813,00 Ft
    20* M4x10mm Insert Torx Screws Replacement For Carbide Inserts Lathe Tool
    Details:
    *100% Brand new and high quality
    *Made of high quality material, durable and practical to use
    *20pcs M4 x 10mm Insert Torx Screws For Carbide Inserts Lathe Tool
    *Model: M4 * 10
    Package Contents:
    20*Torx Screws
    Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
  • Nincs szín - Rugós hüvely 2db ER11 1/4 1/8 hüvelykes szerszámkészlet rugós acélfúrás

    822,00 Ft
    Spring collet 2pcs ER11 1/4 1/8 Inch Kit Tool Equipment Spring Steel Drilling
    Item Details:
    * 100% brand new and high quality
    * Made of high quality material, durable and practical to use
    * 2pcs ER11 1/4 1/8 inch spring collet kit for CNC milling machine lathe tool
    * Product selection, high quality spring steel, long lasting
    * Large clamping force, large clamping range and high accuracy.
    * Wide range of applications such as boring, milling, drilling, tapping, engraving, CNC and other machining.
    * Applicable to: boring, milling, drilling, tapping, engraving, CNC, spindle machine tools and other processing.
    * Material: Spring Steel
    * Size: 1/8: 3.175mm, 1/4: 6.35mm(Approx.)
    * Total Length: 18mm(Approx.)
    How To Use:
    1. Insert the tip into the pressure cap, gently turn the retainer until the pressure cap eccentric retainer portion recessed along the direction
    of the arrow evenly push hard retainer, you can mount the internal pressure cap.
    2. The pressure cap with retainer mounted together on a spindle or chuck body, the cylindrical tool shank after wiping loaded clamping hole, use a
    -wrench to tighten the pressure cap even force until the date before the tool folder in prison use.
    (Note: not in the tool and avoid tightening pressure cap installed to avoid damage to the retainer)
    3. ATC with a-wrench loosen pressure cap out of the chuck and the tool, remove the tool, retainer direction of the arrow push hard to quit, and then
    need to put on retainer to the other aperture.
    Package Contents:
    2 * ER11 Collets
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • 5mm - ER11 rugós reteszes szorítóanyák eszterga CNC marógéphez

    824,00 Ft
    ER11 Spring collet Clamping Nuts Lathe For CNC Milling Machine Industrial
    Features:
    *100% brand new and high quality
    *Made of high quality material, durable and practical to use
    *ER11 chuck clamping nut lathe parts for CNC milling machine engraving machine
    *The preferred spring steel material has high hardness, high strength and strong toughness.
    *Large clamping force, wide clamping range and high precision.
    *Widely used in the fields of boring, milling, drilling, wire tapping, engraving, etc.
    *Carefully handle the various details of the product to ensure the stability and accuracy of the product.
    *Can replace old parts very well.
    Specification:
    *Product Type: ER11 Chuck Nut
    *Material: Spring Steel
    *Model: ER11
    *Optional Chuck Size: 6mm, 5mm, 4mm, 3.175mm
    Package Contents:
    1 * Nut
    1 * Chuck
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • 3,175 mm - ER11 rugós reteszes szorítóanyák eszterga CNC marógéphez

    824,00 Ft
    ER11 Spring collet Clamping Nuts Lathe For CNC Milling Machine Industrial
    Features:
    *100% brand new and high quality
    *Made of high quality material, durable and practical to use
    *ER11 chuck clamping nut lathe parts for CNC milling machine engraving machine
    *The preferred spring steel material has high hardness, high strength and strong toughness.
    *Large clamping force, wide clamping range and high precision.
    *Widely used in the fields of boring, milling, drilling, wire tapping, engraving, etc.
    *Carefully handle the various details of the product to ensure the stability and accuracy of the product.
    *Can replace old parts very well.
    Specification:
    *Product Type: ER11 Chuck Nut
    *Material: Spring Steel
    *Model: ER11
    *Optional Chuck Size: 6mm, 5mm, 4mm, 3.175mm
    Package Contents:
    1 * Nut
    1 * Chuck
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • 4mm - ER11 rugós reteszes szorítóanyák eszterga CNC marógéphez

    824,00 Ft
    ER11 Spring collet Clamping Nuts Lathe For CNC Milling Machine Industrial
    Features:
    *100% brand new and high quality
    *Made of high quality material, durable and practical to use
    *ER11 chuck clamping nut lathe parts for CNC milling machine engraving machine
    *The preferred spring steel material has high hardness, high strength and strong toughness.
    *Large clamping force, wide clamping range and high precision.
    *Widely used in the fields of boring, milling, drilling, wire tapping, engraving, etc.
    *Carefully handle the various details of the product to ensure the stability and accuracy of the product.
    *Can replace old parts very well.
    Specification:
    *Product Type: ER11 Chuck Nut
    *Material: Spring Steel
    *Model: ER11
    *Optional Chuck Size: 6mm, 5mm, 4mm, 3.175mm
    Package Contents:
    1 * Nut
    1 * Chuck
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • 6mm - ER11 rugós reteszes szorítóanyák eszterga CNC marógéphez

    824,00 Ft
    ER11 Spring collet Clamping Nuts Lathe For CNC Milling Machine Industrial
    Features:
    *100% brand new and high quality
    *Made of high quality material, durable and practical to use
    *ER11 chuck clamping nut lathe parts for CNC milling machine engraving machine
    *The preferred spring steel material has high hardness, high strength and strong toughness.
    *Large clamping force, wide clamping range and high precision.
    *Widely used in the fields of boring, milling, drilling, wire tapping, engraving, etc.
    *Carefully handle the various details of the product to ensure the stability and accuracy of the product.
    *Can replace old parts very well.
    Specification:
    *Product Type: ER11 Chuck Nut
    *Material: Spring Steel
    *Model: ER11
    *Optional Chuck Size: 6mm, 5mm, 4mm, 3.175mm
    Package Contents:
    1 * Nut
    1 * Chuck
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • 13mm - Tartozékok ER25 2-16mm rugós retesz CNC marógép véséshez

    928,00 Ft
    Accessories Spring Collet ER25 2-16mm For CNC Milling Machine Engraving
    Features:
    100% brand new and high quality
    Made of high quality material, durable and practical to use
    Widely used in boring, milling, drilling, tapping, grinding, engraving and other processing
    Select high-quality steel. Hardened&precision ground. Big clamping force and wide clamping range
    The correct method of mounting the collet nut:
    1. Put the chuck into the pressure cap, gently turn the clamp spring, when eccentric portion of the pressure cap recessed clamp spring groove. Along the arrow direction and use equal force to push clamp spring, can mount pressure cap.
    2. Put the clamp spring and cap all together installed on the chuck body or spindle. Insert into the clamping hole after wipe the cylindrical shank, use a wrench to tighten the pressure cap, until clip firmly the tool before use .
    (Note: Avoid fastening pressure cap that not installed tool, to avoid damage the clamp spring)
    3. Use a wrench to loosen the pressure cap and took out the chuck or tool, remove the tool. Along the direction of the arrow push out the clamp spring. Then according to need replace other clamp spring.
    Specifications:
    Product Type: Machine Tool Accessories
    Optional Size: 2-16mm
    Applicable Machine: CNC Machine
    Model: ER25
    Quantity: 1
    Package Contents:
    1*ER25 Spring Collet
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • 5mm - Tartozékok ER25 2-16mm rugós retesz CNC marógép véséshez

    841,00 Ft
    Accessories Spring Collet ER25 2-16mm For CNC Milling Machine Engraving
    Features:
    100% brand new and high quality
    Made of high quality material, durable and practical to use
    Widely used in boring, milling, drilling, tapping, grinding, engraving and other processing
    Select high-quality steel. Hardened&precision ground. Big clamping force and wide clamping range
    The correct method of mounting the collet nut:
    1. Put the chuck into the pressure cap, gently turn the clamp spring, when eccentric portion of the pressure cap recessed clamp spring groove. Along the arrow direction and use equal force to push clamp spring, can mount pressure cap.
    2. Put the clamp spring and cap all together installed on the chuck body or spindle. Insert into the clamping hole after wipe the cylindrical shank, use a wrench to tighten the pressure cap, until clip firmly the tool before use .
    (Note: Avoid fastening pressure cap that not installed tool, to avoid damage the clamp spring)
    3. Use a wrench to loosen the pressure cap and took out the chuck or tool, remove the tool. Along the direction of the arrow push out the clamp spring. Then according to need replace other clamp spring.
    Specifications:
    Product Type: Machine Tool Accessories
    Optional Size: 2-16mm
    Applicable Machine: CNC Machine
    Model: ER25
    Quantity: 1
    Package Contents:
    1*ER25 Spring Collet
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • 2mm - Tartozékok ER25 2-16mm rugós retesz CNC marógép véséshez

    1 008,00 Ft
    Accessories Spring Collet ER25 2-16mm For CNC Milling Machine Engraving
    Features:
    100% brand new and high quality
    Made of high quality material, durable and practical to use
    Widely used in boring, milling, drilling, tapping, grinding, engraving and other processing
    Select high-quality steel. Hardened&precision ground. Big clamping force and wide clamping range
    The correct method of mounting the collet nut:
    1. Put the chuck into the pressure cap, gently turn the clamp spring, when eccentric portion of the pressure cap recessed clamp spring groove. Along the arrow direction and use equal force to push clamp spring, can mount pressure cap.
    2. Put the clamp spring and cap all together installed on the chuck body or spindle. Insert into the clamping hole after wipe the cylindrical shank, use a wrench to tighten the pressure cap, until clip firmly the tool before use .
    (Note: Avoid fastening pressure cap that not installed tool, to avoid damage the clamp spring)
    3. Use a wrench to loosen the pressure cap and took out the chuck or tool, remove the tool. Along the direction of the arrow push out the clamp spring. Then according to need replace other clamp spring.
    Specifications:
    Product Type: Machine Tool Accessories
    Optional Size: 2-16mm
    Applicable Machine: CNC Machine
    Model: ER25
    Quantity: 1
    Package Contents:
    1*ER25 Spring Collet
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • 11mm - Tartozékok ER25 2-16mm rugós retesz CNC marógép véséshez

    969,00 Ft
    Accessories Spring Collet ER25 2-16mm For CNC Milling Machine Engraving
    Features:
    100% brand new and high quality
    Made of high quality material, durable and practical to use
    Widely used in boring, milling, drilling, tapping, grinding, engraving and other processing
    Select high-quality steel. Hardened&precision ground. Big clamping force and wide clamping range
    The correct method of mounting the collet nut:
    1. Put the chuck into the pressure cap, gently turn the clamp spring, when eccentric portion of the pressure cap recessed clamp spring groove. Along the arrow direction and use equal force to push clamp spring, can mount pressure cap.
    2. Put the clamp spring and cap all together installed on the chuck body or spindle. Insert into the clamping hole after wipe the cylindrical shank, use a wrench to tighten the pressure cap, until clip firmly the tool before use .
    (Note: Avoid fastening pressure cap that not installed tool, to avoid damage the clamp spring)
    3. Use a wrench to loosen the pressure cap and took out the chuck or tool, remove the tool. Along the direction of the arrow push out the clamp spring. Then according to need replace other clamp spring.
    Specifications:
    Product Type: Machine Tool Accessories
    Optional Size: 2-16mm
    Applicable Machine: CNC Machine
    Model: ER25
    Quantity: 1
    Package Contents:
    1*ER25 Spring Collet
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • 10mm - Tartozékok ER25 2-16mm rugós retesz CNC marógép véséshez

    965,00 Ft
    Accessories Spring Collet ER25 2-16mm For CNC Milling Machine Engraving
    Features:
    100% brand new and high quality
    Made of high quality material, durable and practical to use
    Widely used in boring, milling, drilling, tapping, grinding, engraving and other processing
    Select high-quality steel. Hardened&precision ground. Big clamping force and wide clamping range
    The correct method of mounting the collet nut:
    1. Put the chuck into the pressure cap, gently turn the clamp spring, when eccentric portion of the pressure cap recessed clamp spring groove. Along the arrow direction and use equal force to push clamp spring, can mount pressure cap.
    2. Put the clamp spring and cap all together installed on the chuck body or spindle. Insert into the clamping hole after wipe the cylindrical shank, use a wrench to tighten the pressure cap, until clip firmly the tool before use .
    (Note: Avoid fastening pressure cap that not installed tool, to avoid damage the clamp spring)
    3. Use a wrench to loosen the pressure cap and took out the chuck or tool, remove the tool. Along the direction of the arrow push out the clamp spring. Then according to need replace other clamp spring.
    Specifications:
    Product Type: Machine Tool Accessories
    Optional Size: 2-16mm
    Applicable Machine: CNC Machine
    Model: ER25
    Quantity: 1
    Package Contents:
    1*ER25 Spring Collet
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • 14mm - Tartozékok ER25 2-16mm rugós retesz CNC marógép véséshez

    919,00 Ft
    Accessories Spring Collet ER25 2-16mm For CNC Milling Machine Engraving
    Features:
    100% brand new and high quality
    Made of high quality material, durable and practical to use
    Widely used in boring, milling, drilling, tapping, grinding, engraving and other processing
    Select high-quality steel. Hardened&precision ground. Big clamping force and wide clamping range
    The correct method of mounting the collet nut:
    1. Put the chuck into the pressure cap, gently turn the clamp spring, when eccentric portion of the pressure cap recessed clamp spring groove. Along the arrow direction and use equal force to push clamp spring, can mount pressure cap.
    2. Put the clamp spring and cap all together installed on the chuck body or spindle. Insert into the clamping hole after wipe the cylindrical shank, use a wrench to tighten the pressure cap, until clip firmly the tool before use .
    (Note: Avoid fastening pressure cap that not installed tool, to avoid damage the clamp spring)
    3. Use a wrench to loosen the pressure cap and took out the chuck or tool, remove the tool. Along the direction of the arrow push out the clamp spring. Then according to need replace other clamp spring.
    Specifications:
    Product Type: Machine Tool Accessories
    Optional Size: 2-16mm
    Applicable Machine: CNC Machine
    Model: ER25
    Quantity: 1
    Package Contents:
    1*ER25 Spring Collet
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • 9mm - Tartozékok ER25 2-16mm rugós retesz CNC marógép véséshez

    999,00 Ft
    Accessories Spring Collet ER25 2-16mm For CNC Milling Machine Engraving
    Features:
    100% brand new and high quality
    Made of high quality material, durable and practical to use
    Widely used in boring, milling, drilling, tapping, grinding, engraving and other processing
    Select high-quality steel. Hardened&precision ground. Big clamping force and wide clamping range
    The correct method of mounting the collet nut:
    1. Put the chuck into the pressure cap, gently turn the clamp spring, when eccentric portion of the pressure cap recessed clamp spring groove. Along the arrow direction and use equal force to push clamp spring, can mount pressure cap.
    2. Put the clamp spring and cap all together installed on the chuck body or spindle. Insert into the clamping hole after wipe the cylindrical shank, use a wrench to tighten the pressure cap, until clip firmly the tool before use .
    (Note: Avoid fastening pressure cap that not installed tool, to avoid damage the clamp spring)
    3. Use a wrench to loosen the pressure cap and took out the chuck or tool, remove the tool. Along the direction of the arrow push out the clamp spring. Then according to need replace other clamp spring.
    Specifications:
    Product Type: Machine Tool Accessories
    Optional Size: 2-16mm
    Applicable Machine: CNC Machine
    Model: ER25
    Quantity: 1
    Package Contents:
    1*ER25 Spring Collet
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
  • 7mm - Tartozékok ER25 2-16mm rugós retesz CNC marógép véséshez

    1 003,00 Ft
    Accessories Spring Collet ER25 2-16mm For CNC Milling Machine Engraving
    Features:
    100% brand new and high quality
    Made of high quality material, durable and practical to use
    Widely used in boring, milling, drilling, tapping, grinding, engraving and other processing
    Select high-quality steel. Hardened&precision ground. Big clamping force and wide clamping range
    The correct method of mounting the collet nut:
    1. Put the chuck into the pressure cap, gently turn the clamp spring, when eccentric portion of the pressure cap recessed clamp spring groove. Along the arrow direction and use equal force to push clamp spring, can mount pressure cap.
    2. Put the clamp spring and cap all together installed on the chuck body or spindle. Insert into the clamping hole after wipe the cylindrical shank, use a wrench to tighten the pressure cap, until clip firmly the tool before use .
    (Note: Avoid fastening pressure cap that not installed tool, to avoid damage the clamp spring)
    3. Use a wrench to loosen the pressure cap and took out the chuck or tool, remove the tool. Along the direction of the arrow push out the clamp spring. Then according to need replace other clamp spring.
    Specifications:
    Product Type: Machine Tool Accessories
    Optional Size: 2-16mm
    Applicable Machine: CNC Machine
    Model: ER25
    Quantity: 1
    Package Contents:
    1*ER25 Spring Collet
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.