Generátorok

Features:
Made from premium material, simple construction, long service life.
It can effectively help the generator to adjust the current to the standard level.
Brand new and high quality rectifier, stable performance.
Adopting original imported diode, with excellent rectification function.
Professional manufacturing, exquisite workmanship, high reliability.
Specification:Condition: 100% brand new
Working temperature: - 40℃ to 125℃ (thyristor, rapid thyristor); -40℃ to 150℃ (rectifier tube, fast recovery diode, ultra-fast recovery diode)
Relative humidity: ≤85%
Altitude: below 1000 meters
Requirements and Suggestions for module installation:A) The installation of the module shall be smooth without scratches, bumps and sundries;
B) When installing the module to the heat sink, gently remove the oxide layer on the of the heat sink with fine sandpaper, wipe the of the heat sink with anhydrous ethanol, and then evenly apply a thin layer of heat-conducting silica gel on the contact of the copper base plate and the heat sink to make the contact good and reduce the thermal resistance;
C) When fastening the module on the heat sink , use or M6 flat batten and spring washer, and fasten the screw with (5 1)Nm force distance;
D) The wiring of the main electrode of the module shall be copper strip with smooth, flat and sufficient contact . The contact must be good. The tightening moment of force shall be: if screws are used, the moment of force shall be (3) Nm; if M6 screws are used, the moment of force is (5 1)Nm. if M8 screws are used, the moment of force is (9 1) Nm.
Package List:1 * MXY16-15 Rectifier Module
1 * MXG16-15 Rectifier Module
Note:1. The environment should be free from violent vibration and impact, and the environment medium should be free from corrosive metal, damaging the insulation of the magazine and atmosphere.
2. When forced air cooling is adopted in the module, the wind speed shall be 6 m/s and the ambient temperature shall be -40℃ to 40℃.

Features:
It is a timer relay module with high precision, stable and reliable performance.
Power on to connect, and will disconnect after delay time, delay time error is 2% .
There are many time range from 0~10 seconds to 0~10 hours for your choice, the time is adjustable.
220V AC input voltage, and the load capacity is up to 10A250VAC or 10A30VDC.
Widely used on timer operating equipment, household electrical appliances, lighting delay modification, factory equipment, time delay control, etc.
Specifications:
Time Delay: 0~10Seconds/0~10Minutes/0~100Minutes/0~10Hours(Optional)
Min. Time Adjustable Value: 1% (e.g. 1minute for 0~100minutes, 0.1hour/6minutesfor 0~10hours)
Time Delay Error: 2%
Standby Power Consumption: 0.8W
Load Capacity:10A 250VAC/10A 30VDC
Size: 58 x 43 x 20mm / 2.28 x 1.69 x 0.78"
Quantity: 1
Package Includes:
1 x Timer Relay Module
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:
This automatic voltage regulator is used to control the output of gasoline generator.
Mounted near the generator and connected with several wires to measure and adjust the generator.
By increasing or decreasing the generator control voltage, the output voltage of the generator increases or decreases accordingly.
Widely used for for 2KW to 3KW, 168F gasoline generator.
The wire direction might differ, as the blue might be in left or right, please take the real one as standard.
Specifications:
Main Color: Black
YP-AVR: 220ÎĽF, 250V
Power: 2KW-3KW
Starting Mode: Electric start
Operating Temperature: -40℃~ 105℃
Fit for: 2KW~3KW, 168F gasoline generator
Package Includes:1 x Voltage Regulator

Feature:The product is a universal accessory, suitable for 1-3 kW generators.
Excellent workmanship ensures high quality of products.
The product can effectively guarantee the voltage stability of the generator.
Large capacitor is used in the product, which is stable and high.
The product is made of high-quality electronic components with stable and reliable performance.
Specification:Capacitor: 250V 220UF
Wiring harness: 6 wires (4-wire socket 2 carbon brush wires)
Applicable to: 1-3KW generator universal
Mounting hole distance: 10cm / 3.9in
Net weight: about 112g / 1.0oz
Package list:1 x Generator Voltage Regulator
Note:1. The actual product color may deviate from the photo due to light.
2. There may be a slight deviation in the measurement of product..wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
3. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

Description:
The hand-cranked generator provides up to 6V for experiments requiring a power supply. The clear plastic housing is lightweight and durable. These jumper cables provide a connection to an electrical circuit. It includes a LED and can be used as a flashlight. It also comes with one resistor. Teachers in elementary and secondary classrooms could use this generator as an education kits to demonstrate through hands-on activities. Parent could give this kit to as a great gift.
Features:
This hand crank electricity generator could help to understand generation of electricity, quite suitable for adult and children to play together.
Slowly rotate the crank one circle each second and the voltage could 3V that could easily lighten a LED.
This set comes with one pair of jumper cables with clips at each end for quick and convenient connection.
Connect the generator to the resistor and the LED light, it would be a beautiful and small emergency light.
The voltage could 6V at most from a quite fast rotation, so rotate the crank faster might burn the LED.
Specifications:
Main Color: Blue
Voltage Range: 3V~6V
Size: 6 x 4.6 x 2.5cm / 2.36 x 1.81 x 0.98"
Quantity: 1 set
Weight: 63g(approx.)
Package Includes:
1 x Generator
1 pair x Jumper Cables
1 x LED
1 x Resistor
(Other items are not included)
Note:
Jumper cables are sent in random color. Thanks for your understanding.

Feature:1. The generator automatic voltage regulator is suitable for petrol generator 2 ~ 3kw.
2. Full-wave rectifier, single-phase voltage detection, adjustable output voltage.
3. Resin sealing, moisture-proof and shock-proof.
4. Simple structure, light weight, small size, easy to install.
5. Petrol generator single-phase voltage regulator, strong voltage regulation performance.
Specification:
Condition: 100% Brand New
Item Type: Generator Voltage Regulator
Material: Aluminum Shell
Color: Gray
Detection Input: 16 ~ 25VAC 50HZ
Power input: 60-100VAC 50HZ
Output Voltage: 100VDC (when 85V input)
Output Current: 2A continuous
Voltage Regulation: Less than /- 1% (change in engine within 4% )
Temperature Stability: Voltage drift 0.05% /Per Degree
Package List:1 x Generator Voltage Regulator

Features:
This automatic voltage regulator is used to control the output of gasoline electric generator.
It is connected to the generator with several wires to stabilize the voltage.
By increasing or decreasing the generator control voltage, the output voltage of the generator increases or decreases accordingly.
The voltage regulator is suitable for 3.5KW-5KW single phase generators.
It is sealed with resin which provides a better moisture and vibration resistance.
Specifications:
Housing Material: Aluminum
Detection Input: 16~25VAC 50HZ
Power Source Input: 60~100VAC 50HZ
Output Voltage: 100VDC (at 85V input)
Output Current: 2A continuous
Voltage Regulation: &;±1% (generator rotational is within 4% )
Temperature Stability: Voltage drift 0.05% /℃
Package Includes:
1 x AVR
Note:
Please allow 1-2mm error due to manual measurement. Thanks for your understanding.
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Feature:1. Made of high quality material, firm, corrosion resistant and durable.
2. Remove iron oxide, dust and other debris from the fuel to prevent clogging of the fuel system.
3. Easy to install and remove, no complex tools required.
4. Reduce mechanical wear, make sure engine stable operation, improve reliability.
5. Advanced manufacturing, high reliability, high performance.
Specification:
Condition: 100% Brand New
Item Type: Air Filter
Material: Plastic
Color: As shown in the picture
Size: Approx. 17.9x3.9cm / 7.0x1.5in
Weight: Approx.265g/9.3oz
Fitment: Fit for 186/188/190F/192F
Application: Generator of agricultural, farm, construction site, garden
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:5 x Air Filter
Note:
1. Please allow 1-2cm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Features:
This automatic voltage regulator is used to control the output of gasoline electric generator.
It is connected to the generator with several wires to stabilize the voltage.
By increasing or decreasing the generator control voltage, the output voltage of the generator increases or decreases accordingly.
The voltage regulator is suitable for 6.5KW 7KW 8.5KW 2-phase 6-wire generators.
It has a aluminum housing which is rust resistant and can offer a good protection.
Specifications:
Material: Aluminum
Used for: 6.5kW~8.5kW gasoline generator (450V 680VF)
Start Method: Electrical starting
Note:1) A higher output AVR definitely works perfect on a generator of low power output while on the contrary, a low power output AVR CAN NOT be used for a generator of higher power output.
2) Most of replacement AVRs in the market are rated only 5KW and can only handle a maximum power of 6KW. They are too weak to be used unless the total load of your generator won't exceed 5KW.
3) If our AVR is out of adjustment for your generator, please MANUALLY turn clockwise or counter-clockwise a small bronze screw in a blue rubber part to your desirable power output. Clockwise turning is for increasing and counter-clockwise turning for decreasing voltage output.
4) There may be a capacitor voltage regulator installed in your generator. If so, you shall find a compatible generator capacitor.
Package Includes:
1 x AVR
Note: Please allow 1-2mm error due to manual measurement. Thanks for your understanding.

Features:
1. 100% brand new and high quality
2. Made of high quality material, durable to use.
3. Professional manufacturing, excellent sensitivity and high reliability.
4. Great and direct replacement for the old or damaged one
5. It has stable performance and is a good accessory for generator
Specification:
Condition: 100% Brand New
Thread: 3/8-24 UNF
Temperature Range: -55℃ to 105℃(-65℉-225℉)
Package List:
1 * Speed Sensor

Features:
110/220/440 VAC Programmable Input
Built-in Hihg Capacity 8A mp Fuse
With Under Frequency Protection; Soft Start Voltage Ramping
SENSING INPUT Voltage : 90-480V ac Maximum Frequency : 50-60 Hz nominal
POWER INPUT Voltage : 95-264V ac Maximum Frequency : 50-60 Hz nominal
Package Included:
1 x GAVR-8A Universal AVR Generator Automatic Voltage Regulator Module
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:
To control the charge of wind turbine generator battery.
Protect the wind generator and prevent the battery from overcharging.
Made of high quality material for long durability and stable performance.
Easy to install and convenient to use.
Single phase and three phase for you to choose.
Specifications:Condition: 100% Brand New
Shell Material: Aluminum Epoxy Resin
Color: Black
Type: Single Phase, Three Phase(Optional)
For Single Phase
Rated Power: 300W
Battery Rated Voltage: DC 12V
Controller Output Current: ≥15A
Controller Output Voltage: 14.2±0.3V
Start Braking Voltage: 14.5±0.5V
Recover Charging Voltage: 13.5±0.5V
Weight: approx. 121g
Connection Method: 2 yellow wires are connected to wind turbine generator, red wire for battery positive pole, green wire for battery negative pole.
For Three Phase
Rated Power: 300W
Battery Rated Voltage: DC 12V
Controller Output Current: ≥10A
Controller Output Voltage: 14.2±0.3V
Start Braking Voltage: 14.2±0.5V
Recover Charging Voltage: 13.5±0.5V
Weight: approx. 247g
Connection Method: 3 yellow wires are connected to wind turbine generator, red wire for battery positive pole, black wire for battery negative pole.
Package Included:
1 x Wind Turbine Generator Charge Controller

Features:1. It is made of high quality metal, rust and corrosion resistance, solid and durable to use.
2. Convenient installation and easy operation.
3. Easy to change when the sensor is missing or damaged, as a spare one to use.
4. It can be used in bad environment such as smoke, oil and gas, water vapor, etc.
5. Strong output signal, good anti-interference performance.
Specification:Condition: 100% Brand New
Item Type: Generator Speed Sensor
Material: Metal
Model: MSP676
Thread length: Approx. 120.99mm / 4.8in
Thread diameter: Approx. 15.74mm / 0.6in
Wire: 2
Package List:1 * Generator Speed Sensor

Feature:1. Practical replacement accessories for generator, simple installation.
2. Professional manufacturing, stable performance and high reliability.
3. High quality generator flywheel fan blade replacement accessories.
4. Suitable for agriculture, fishery, animal husbandry, forestry, etc.
5. Adopting high quality plastic material, ensuring maximum durability.
Specification:
Condition: 100% Brand New
Item Type: Flywheel Fan
Material: Plastic
Color: As shown in the picture
Size: Approx. 18.2x2.6cm / 7.2x1.0in
Weight: Approx.680g/24oz
Fitment: Fit for 168F/170F
Application: Generator of agricultural, farm, construction site, garden
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:5 x Flywheel Fan
Note:
1. Please allow 1-2cm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Feature:1. Perfect replacement accessory fit for 178F/186F/188F/192F engine.
2. Made of premium plastic material, corrosion resistance, long service life.
3. Practical generator air filter replacement accessories, a direct replacement for the old and broken one.
4. Easy to install, stable performance, not easy to break or damage.
5. Good wear resistance, high reliability, more reliable and convenient to use.
Specification:
Condition: 100% Brand New
Item Type: Air Filter
Material: Plastic
Color: As shown in the picture
Size: Approx. 21x16.5cm / 8.3x6.5in
Weight: Approx.531g/18.7oz
Fitment: Fit for 178F/186F/188F/192F
Application: Generator of agricultural, farm, construction site, garden
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Air Filter
Note:
1. Please allow 1-2cm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Features:
Made from premium material, simple construction, long service life.
It can effectively help the generator to adjust the current to the standard level.
Brand new and high quality rectifier, stable performance.
Adopting original imported diode, with excellent rectification function.
Professional manufacturing, exquisite workmanship, high reliability.
Specification:Condition: 100% brand new
Working temperature: - 40℃ to 125℃ (thyristor, rapid thyristor); -40℃ to 150℃ (rectifier tube, fast recovery diode, ultra-fast recovery diode)
Relative humidity: ≤85%
Altitude: below 1000 meters
Requirements and Suggestions for module installation:A) The installation of the module shall be smooth without scratches, bumps and sundries;
B) When installing the module to the heat sink, gently remove the oxide layer on the of the heat sink with fine sandpaper, wipe the of the heat sink with anhydrous ethanol, and then evenly apply a thin layer of heat-conducting silica gel on the contact of the copper base plate and the heat sink to make the contact good and reduce the thermal resistance;
C) When fastening the module on the heat sink , use or M6 flat batten and spring washer, and fasten the screw with (5 1)Nm force distance;
D) The wiring of the main electrode of the module shall be copper strip with smooth, flat and sufficient contact . The contact must be good. The tightening moment of force shall be: If screws are used, the moment of force shall be (3) Nm; If M6 screws are used, the moment of force is (5 1)Nm. If M8 screws are used, the moment of force is (9 1) Nm.
Package List:1 * MXY25-15 Rectifier Module
1 * MXG25-15 Rectifier Module
Note:1. The environment should be free from violent vibration and impact, and the environment medium should be free from corrosive metal, damaging the insulation of the magazine and atmosphere.
2. When forced air cooling is adopted in the module, the wind speed shall be 6 m/s and the ambient temperature shall be -40℃ to 40℃.

Features:
To control the charge of wind turbine generator battery.
Protect the wind generator and prevent the battery from overcharging.
Made of high quality material for long durability and stable performance.
Easy to install and convenient to use.
Single phase and three phase for you to choose.
Specifications:Condition: 100% Brand New
Shell Material: Aluminum Epoxy Resin
Color:
Type: Single Phase, Three Phase(Optional)
For Single Phase
Rated Power: 300W
Battery Rated Voltage: DC 12V
Controller Output Current: ≥15A
Controller Output Voltage: 14.2±0.3V
Start Braking Voltage: 14.5±0.5V
Recover Charging Voltage: 13.5±0.5V
Weight: approx. 121g
Connection Method: 2 yellow wires are connected to wind turbine generator, red wire for battery positive pole, green wire for battery negative pole.
For Three Phase
Rated Power: 300W
Battery Rated Voltage: DC 12V
Controller Output Current: ≥10A
Controller Output Voltage: 14.2±0.3V
Start Braking Voltage: 14.2±0.5V
Recover Charging Voltage: 13.5±0.5V
Weight: approx. 247g
Connection Method: 3 yellow wires are connected to wind turbine generator, red wire for battery positive pole, wire for battery negative pole.
Package Included:
1 x Wind Turbine Generator Charge Controller

Features:
1. Generator voltage regulation
2. Over-voltage protection function
3. Low protection function
4. Adjustable voltage range
5. With parallel machine function
6. High voltage stability
7. Suitable for single phase and three phases
8.50 HZ 60 HZ is adjustable
Specification:
Model: GAVR-20A
Detection input: voltage 220V/400VAC
Power input: voltage 170-270vac single-phase two-wire
Magnetic field output: maximum 95VDC at 240VAC input, current 15A
Weight: Approx.434g/15.3oz
Package list:
1 x GAVR-20A Voltage Regulator

Features:1. Microcomputer control, also can manually start and stop.
2. LED indicating fault information, which is convenient to use.
3. Compact size, light weight, practical and easy to use.
4. Solid structure, low noise, stable working performance.
5. Using high quality glass resistor, working temperature: -55°C ~ 350°C.
6. High quality potentiometer, smooth adjustment, not easy to damage, 100% imported original IC.
7. High accuracy of resistance, wide operating temperature, small drift and good stability.
8. High quality capacitors, good parameter consistency and high reliability.
Specification:Condition: 100% Brand New
Item Type: Generator Controller
Material: Plastic
Model: DSE702MS
Mounting Hole Size: Approx. 68 x 68mm / 2.7 x 2.7in
Package List:1 x Generator Controller
2 x Fixing screw
2 x Key
Note:1. Please allow slight error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
3. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px Solid #000; border-left: 1px Solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px Solid #000; border-right: 1px Solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Feature:1. Made of premium iron material, antiwear, corrosion resistant, long lifespan.
2. Practical electric flywheel replacement parts, easy to replace the old parts.
3. Simple installation, stable performance, not easy to damage or broken.
4. Fit for generators for farming, breeding farms, construction sites, garden sites.
5. Conform to strict quality control standards, reliable to use.
Specification:
Condition: 100% Brand New
Item Type: Generator Flywheel
Material: Iron
Color: As picture shown
Size: Approx. 15 x 2.3cm/5.9 x 0.9in
Applicable Model: 154F 156F
Uses: For generators for farming, breeding farms, construction sites, garden sites
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Electric Flywheel

EA04C Automatic Voltage Regulator Controller Single Phase Generator Spare Parts
Features:
High quality EA04C voltage regulator, stable and reliable performance.
The potentiometer adjustment is smooth and not easy to damage.
High resistance , wide range of operating temperature, small drift stability.
Adopting high-quality capacitors, good consistency of parameters, high reliability.
Professional manufacturing, exquisite workmanship, high reliability.
Specification:Test input: voltage 160-265 VAC/300-550 VAC single phase
Power Input: voltage 90-240 VAC single-phase two-line
Magnetic field output: maximum 63VAD at input voltage of 120VAC
Current: continuous 4A, non-continuous 7A within 60 seconds
Package List:1* Automatic Voltage Regulator

DC10G is a controller for manually starting and stopping the engine.Through 4-bit LED digital tube display generator frequency, voltage, battery voltage, cumulative working time, with a variety of stop protection and alarm indicator function, it can conveniently monitor the working state of generator set.The controller can be connected to the computer through the data line, and the parameters of the controller can be set by software, which is convenient to match the more specifications of the generator set.
Features:1. Using 32-bit imported high-performance single chip microcomputer control.
2. 4-bit digital tube display, can be switched automatically or manually.
3. The vehicle starting key is durable.
4. With parameter setting function, you can set parameters through computer connection.
5. It has a variety of alarm protection functions.
6. Standard waterproof ring. The rear panel has anti-splash function.
7. All the wiring is completed through the European terminal. The assembly, connection, maintenance and replacement of the equipment is very easy and convenient.
Parameter display:Generator voltage
Generator frequency
Engine battery voltage
Cumulative running time of the unit
Alarm protection
Speeding
Overclocking
Low oil pressure
High water temperature
External instant parking alarm
Power generation overvoltage
Charging failure warning
Specification:Condition: 100% Brand New
Item Type: Engine Manual Start Controller
Power input:8-33 VDC
Power consumption: MAX 2W
Power generation input:15-300 VAC,50/60 Hz
Speed input: Freq 300Hz ~ 10kHz
Oil valve output: MAX 16A
Motor output: MAX 10A
Excitation output: MAX 80mA
Alarm output: MAX 16A
Operating temperature:-30-75 ℃
Storage temperature:-40-85 ℃
Dimensions: Approx. 78 * 78 * 72mm / 3.1 * 3.1 * 2.8in
Opening Hole Size: Approx. 67 * 67mm / 2.6 * 2.6in
Package List:1 * Controller
2 * Key
2 * Fixing screw
Note:1. Please allow slight error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Controller DC10K is designed as one of the engine manual start controller.
The Hz,Volt, Battery voltage and accumulation time can be displayed through the front face LED screen. This controller is also with various kinds of stop and alarm indications to monitor the genset status.Besides, it can also connect with PC so that parameters can be set through Computer to equip for more different gensets.
Features:1. Using 32-bit imported high-performance single-chip control.
2. 4-digit digital display, which can be switched automatically or manually.
3. Durable with a vehicle starter key.
4. With parameter setting function, you can set parameters through computer connection.
5. With a variety of alarm protection features, stable performance.
6. Standard waterproof ring, the rear panel has waterproof function.
7. All wiring is completed through European-style terminal blocks. It is very easy and convenient to assemble, connect, repair and replace the equipment.
The parameter display:Generator voltage
Generator frequency
Engine battery voltage
Cumulative running time of the unit
Alarm protection
Speeding
Overclocking
Low oil pressure
High water temperature
External instant parking alarm
Power generation overvoltage
Charging failure warning
Specification:Condition: 100% Brand New
Item Type: Generator Controller
Power supply: 8-33VDC
Power consumption: MAX 2W
Alternator Voltage input: 15-300VAC, 50/60H
Speed input: Freq 300Hz-10kH
Fuel output: MAX 16
Motor output: MAX 10
Excitation Output: MAX 80m
Alarm output: MAX 16
Operating temperature: -30-75℃
Storage temperature: -40-85℃
Dimensions: Approx. 78 * 78 * 72mm / 3.1 * 3.1 * 2.8in
Hole Size: Approx. 67 * 67mm / 2.6 * 2.6in
Package List:1 * Controller
1 * Key
1 * Interface wiring
Note:1. Please allow slight error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

This AVC63-4 voltage regulator is an encapsulated automatic electronic voltage regulator that controls the output of the generator by regulating the current into the exciter field. The low frequency protection 60Hz system presets the inflection point to 54-61Hz, and the 50Hz system presets the inflection point to 45-51Hz. Maximum power consumption per unit is 8W.
Features:1. This is a engine voltage regulator, AVR, rectifier.
2. High quality capacitors for high reliability.
3. EMI suppression internal electromagnetic interference filtering.
4. The low frequency protection 60Hz system presets the inflection point to 54-61Hz, and the 50Hz system presets the inflection point to 45-51Hz.
5. Maximum power consumption per unit is 8W.
Specification:Voltage: 190-240VAC
Maximum voltage of 73VDC at 220VAC input
Frequency: 50/60Hz, jumper optional
Current continuous: 3.5A, intermittent: 7A 10 seconds (52/105Vdc)
Resistance: minimum resistance 15Ω, maximum resistance 100Ω
AVoltage accumulation: Residual voltage of AVR terminal >5V AC
Voltage regulation: <±1% when the engine is adjusted to 4%
Working temperature: -40 °C to 60 °C
Storage temperature: -65 °C to 85 °C
External voltage regulation: ±10% , with 2kΩ 1W trimmer
Size: about 99.5mm * 67mm * 47.5mm / 3.9 * 2.6 * 1.9in
Weight: 250g ± 2%
Package list:1 * Voltage Regulator
1 * User manual

Feature:1. The product has low frequency protectionand set protection point 92% -94% rated frequency.
2. The AVR is featured with steady pressure regulation rate ±1% (within 4% engine change range).
3. Using surface mount technology, the AVR has parallel operation function.
4. The AVR is applicable to 50Hz, 60Hz self-excited AC brushless generator, it is part of its excitation system.
5. With low frequency protection (UFRO) and LED indication frequency too low status function, the product is very safe for use.
Specification:
Item Type: Automatic voltage regulator.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Detect Input
Voltage: AC 170-264V or AC 352V-528V jumper selection
Frequency: 50/60 Hz jumper selection
Power Input
Voltage: AC 100-264V
Output
Voltage: When the input voltage is 200VAC, the output can up to 82V DC
Current: Continuous output is 4A
Allow 7.5A instantaneous current for 10 seconds
Excitation Resistance: The minimum value is 15Ω (when the power supply voltage is lower than 175V
10Ω minimum)
External Voltage Adjustment: External resistance value 1KΩ/1W
Voltage Setting Range: ≥±10%
Size: Approx. 10.4 x 13.9 x 3.9cm / 4.1 x 5.5 x 1.5in
Package List:1 x Automatic Voltage Regulator

Features:
The charger is suitable for various brands of 12V and 24V lead-acid batteries, especially charging for sealed wide temperature battery.
Working voltage is AC 160-250V, working frequency is 20~600Hz, it can the engine still can be charged at low .
It can be charged directly by generator's power to replace the charger.
It allows to start the motor when charging the battery by the grid.
It can charge by constant current and voltage, when the battery is nearly full, will transfer to trickle current then stop automatically.
As the system adopts the soft start design, it will not produce spark for electrical impulse. Besides, when the charging machine is connected online, it will not interrupt the electricity system.
Specification:
Product model: CH2810
Input voltage: 160-250VAC
Output voltage: 12V/24VDC
Frequency: 20-600Hz
Charging mode: Floating charge
Working temperature: -40~50°C
Storage temperature: -20~60°C
Package weight: 699g (approx.)
Package List:
1 * Generator Battery Charger

Features:
This product adopts full electronic loop design.
It can control a wide range of engines.
Fast and precise response to instantaneous changes.
It can prevent reverse battery voltage, instantaneous pulse voltage.
Easy to install, pre-adjustable, adjustable speed work idle.
High reliability and it can withstand all kinds of electromagnetic interference around the engine.
Specification:Model: ESD5500E
Speed range: 1KHz ~ 7.5KHz
Thermostability: Max. 1%
IDLE adjustment: 160±20Hz ~ 95% of rated speed
DROOP adjustment: The minimum position is 15Hz 6Hz/ load current change per ampere
The maximum position is 400Hz 75Hz/ load current change per ampere
External speed adjustment:±200Hz (external 1KQ)
Weight: Approx.600g/ 21.2oz
Package List:1 * Engine Speed Controller
Note:Please allow slight error due to manual measurement. Thanks for your understanding.

Features:
The Engine Interface Module is a sealed, engine mounted module that provides switching relays for the Starter Motor Solenoid, Plug and Fuel Solenoid. Each of these circuits is protected with individual fuses mounted in the module. Individual LED's illuminate when each circuit is energised.
There are two versions of the Engine Interface Module available: EIM Basic: The ElM is utilised in conjunction with control panels equipped with overspeed shutdown.
EIM Plus: The ElIM plus is used in conjunction with control panels not equipped with overspeed shutdown.
Overspeed Signal (EIM Plus only) The ElM Plus monitors the speed signal from the magnetic pick-up. If the engine speed rises above a certain pre-setable value, the module sends a volt signal to the generator set control panel to activate the Overspeed Fault circuitry.
The Overspeed Set Point is factory set at 55 Hz for 50 Hz sets and 66 Hz for 60 Hz sets. This can be adjusted using the adjustment screw accessed through the hole beside the Overspeed Set-up LED. While the engine is running at the rated speed (1500 rpm for 50 Hz or 1800rpm for 60 Hz) the adjustment screw should be adjusted until the Overspeed Set-up LED just goes out. This sets the overspeed value at 10% above the speed at which the generator set is operating.
Specification:Condition: 100% brand new
Item: 630-645
Voltage: 12V DC
Model: EIM PLUS
Type: 859767
Package List:1 * Engine Interface Module

Features:
With over voltage protection function and low speed protection function, safe and reliable control of the generator.
Adjustable voltage range, high voltage stability, 50HZ and 60HZ are optional.
The potentiometer adjustment is smooth and not easy to damage.
High resistance , wide range of operating temperature, small drift stability.
Adopting high-quality capacitors, good consistency of parameters, high reliability.
Specification:Model: EA16A
Test input: voltage 120（90-139）/240（190-277）VAC
Power Input: voltage 95-139VAC ±10% single-phase two-line
Magnetic field output: maximum 63VDC; current continuous 4A, non-continuous 7A within 60 seconds and 9A within 10 seconds
Voltage regulation accuracy: ＜ ±1% RMS (engine speed variation within 4% )
Package List:1* Automatic Voltage Regulator

Feature:1. Practical electric flywheel replacement parts, can directly replace old or broken parts.
2. Using premium iron material, high hardness, corrosion resistance and long service life.
3. Easy installation, stable performance, not easy to damage, and strong practicability.
4. Good wear resistance and high reliability, suitable for gasoline generators.
5. This electric start magnetic flywheel is perfect for 188F/190F/192F/GX390.
Specification:
Condition: 100% Brand New
Item Type: Flywheel
Material: Iron
Weight: Approx. 5450g / 192.2oz
Size: Approx. 20x4.5cm / 7.9x1.8in
Applicable Model: 188F/190F/192F/GX390
Uses: Generators for farming, breeding farms, construction sites, garden sites
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Electric Start Flywheel
Note:
1.Please allow 0-1 inch error due to manual measurement. Thanks for your understanding.
2.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

AS540 AVR Automatic Voltage Regulator Power Stabilizer For Brushless Generator
Features:
1. Adopted of high quality electronic components, and accuracy process, for the durability
2. High accuracy, the pressure regulation accuracy is less than ±1%
3. Professional design, it can provide stable performance.
4. Suitable for S0/S1 (7.5KVA-62.5KVA) generator
5. With generator voltage regulation, over voltage protection, low speed protection, high voltage stability and adjustable voltage range
Specification:
Condition: 100% Brand new
Model: AS540
Detection and Power Input: Voltage 120 (95-130) / 240 (190-265) VAC
Single-phase two-wire selection with jumper copper
Magnetic Field Output: Maximum 82V DC at 200VAC input
Current: 4A Continuous, non-continuous 10 seconds 7.5A
Pressure Regulation Accuracy: <±1%
Package List:
1 x Voltage Regulator

Feature:1. NTA-5A-2DB applies the half-wave phase-controlled thyristor type automatic voltage regulator for Denyo generator, and forms part of the excitation system of the brushless generator.
2. By using proficient semiconductors in the power circuit, a positive voltage accumulated from the residual level is ensured
3. The product is connected to the main stator winding and the excitation excitation winding to provide closedloop control output voltage, the load is specified as /- 1.5%
4. The NTA-5A-2DB automatic voltage regulator is a compatible replacement for Denyo generator AVR.
5. In addition to adjusting the generator voltage, the AVR circuit provides down speed and sensing loss protection to make sure the safety and reliable control of the generator
Specification:
Item Type: NTA-5A-2DB automatic voltage.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Accessory Number: 06018-20671
Model: NTA-5A-2DB
Supporting Application Models: 45ESI, 150SPM, 150ESK
Sensing Input Voltage: 55-200V AC
Frequency: 50/60HZ
Maximum Output Voltage: 120V /5A dc/10s.
Voltage Input 400Vac, 50Hz/60Hz UFRO Slop 17% down to 30Hz
Voltage Adjustment Range ≥ 15%
Package List:1 x NTA-5A-2DB Voltage Regulator
1 x Potentiometer
1 x Black Hat

EIM PLUS 630-465 12V DC Engine Interface Module Starter Motor Solenoid Glow Plug
Features:
* 100% Brand New And High Quality
* Made Of High-quality Materials, Durable
* The Engine Interface Module Is Sealed. The Module Installed In The Engine Provides Switch Relays For The Starter Motor Solenoid Valve, Glow Plug And Fuel Solenoid Valve.
* Each Of These Circuits Is Protected By A Separate Fuse Installed In The Module. When Each Circuit Is Energized, A Single Led Lights Up.
* There Are Two Versions Of The Engine Interface Module: Eim Basic Version: Elm Works With A Control Panel Equipped With An Overspeed Shutdown Function.
* Eim Plus: Elim Plus Is Used In Conjunction With A Control Panel That Is Not Equipped With An Over-speed Shutdown Function.
Overspeed Signal (eim Plus Only) Elm Plus Monitors The Speed Signal From The Electromagnetic Sensor.
*if The Engine Speed Rises Above A Certain Preset Value, The Module Will Send A Zero Volt Signal To The Generator Set Control Panel To Activate The Overspeed Fault Circuit.
*for The 50 Hz Group, The Overspeed Set Point Is Factory Set To 55 Hz, And For The 60 Hz Group, The Overspeed Set Point Is Factory Set To 66 Hz.
*it Can Be Adjusted Using The Adjustment Screw In The Hole Next To The Led Via The Overspeed Setting.
*when The Engine Is Running At Rated Speed (1500 Rpm At 50 Hz Or 1800 Rpm At 60 Hz), The Adjustment Screw Should Be Adjusted Until The "overspeed Setting" Indicator Light Goes Out.
This Will Set The Overspeed Value 10% Higher Than The Operating Speed Of The Generator Set.
Specifications:
* Number: 630-645
* Voltage: 12V DC
* Model: EIM PLUS
Package Contents:
1 * Engine Interface Module
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

WJD30 / 50T Automatic Voltage Regulator Bridge Rectifier For Gasoline Generator
Features:
100% brand new and high quality
Made of high-quality materials, durable
Built-in full-wave output bridge rectifier.
The voltage output increases with the load.
Stable voltage output with negative voltage feedback.
Over voltage, over current and short circuit protection.
Product parameters:
Size: as shown
Name: Automatic voltage stabilizer rectifier
Specification: WJD30 / 50T
Rated power: 6.5KW
Color: mainly black
Material: plastic wire power supply
Maximum output: DC 90V 3.5A.
Excitation voltage: 90V~100V.
Feedback voltage: 14V~24V, average 18V (sampling voltage).
Frequency: 50/60Hz
AC voltage output: 120V / 240V
Automatic voltage adjustment accuracy: ≤±1% .
Maximum temperature rise: 130C or 266F.
Continuous working time: ≥20 hours.
240V output large manually adjustable voltage output range is 160V~260V
Special Note:
Higher output AVRs can definitely run perfectly on low-power output generators. On the contrary, low-power output AVRs cannot be used for higher-power generators.
If the AVR of our generator is out of adjustment, please manually turn a small bronze screw clockwise or counterclockwise in the blue rubber part (potentiometer) to achieve the desired power output.
Clockwise rotation is used to increase voltage, and counterclockwise rotation is used to decrease voltage output.
Package Included:
1 * Voltage regulator
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.