Kategóriák

Kategóriák

Folyamatmérnöki berendezések

Aktív szűrők

  • Nincs szín - Szíjtárcsa vezérműtárcsa Professzionális tartós javítás a nyomtató építéséhez

    590,00 Ft
    Description:
    This synchronous aluminum belt pulley is designed for printer. It is an printer accessory for 6mm wide belt with 20 teeth. As an synchronous pulley wheel, you will find it perfect for printer or similar projects.
    Features:
    Adopt high quality aluminum alloy, excellently machined, finished smoothly.
    This pulley is for 6mm width 2GT timing belt.
    2pcs M3 keyhole placed in 90 degree angle.
    Each of the two sides of the wheels were mounted bearings.
    Perfect choice for building a printer or similar projects.
    Specifications:Material: Aluminum Alloy
    Height: 16mm / 0.629"
    Outer Diameter: 16mm / 0.629"
    Inner Diameter: 8mm / 0.314"
    Belt Width: 6mm / 0.236"
    Quantity: 2
    Weight: 10g(approx.)
    Package Includes:2 x Belt Pulleys
    Note:1. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
    2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
  • Nincs szín - A nyomtató törésérzékelő izzószála a RunOut Pause Monitor érzékelő modul észleléséhez

    692,00 Ft
    Features:
    Use on lerdge board: the green light for the module is always on when material is available. When the material is used up, the green light goes out. The main board executes the pause command operation and waits for the personnel to replace the good material and then continues to print.
    Lerdge main board wiring: M sensor port on the main board.
    For other boards: material detection module uses level detection method.
    When there is material, the level signal of the detection port should be high. When there is no material, the level signal of the material port becomes low, and the system detects one. If the high to low conversion is determined, the material is considered exhausted and the pause command is executed. After humans change the material, the printer continues to print.
    Suitable for printer run-out, pause detection.
    Specification:Condition: 100% brand new
    Material: ABS
    Color: as picture shown
    Package list:1 x Filament Detecting Module
    1 x Connecting Line
    Note:
    Please note that the new type and old type of this product will be
    sent randomly, and make sure you will not mind before ordering.
  • Nincs szín - 10 X 1 mm-es extruder fúvóka Sárgaréz extruder fúvóka 1,75 mm az Mk8 GS nyomtató alkatrészekhez

    714,00 Ft
    Features:
    Suitable for abrasive or easily clogged filaments.
    nozzle replacement, easy to install and replace.
    High-quality brass material - Extruder brass nozzle is made of durable brass material, which is not easy to rust or corrode and has a long service life.
    Wide compatibility - Compatible with all 1.75mm ABS / PLA printers, can be used for Makerbot Creality -10 / MK8 Makerbot printers, etc.
    The printer nozzle effectively prevents printhead leakage and produces consistent print results with and glossy finish. Reduce the resistance of the corners and avoid using rounded chamfers to block the filaments. It is easy to identify the engraving size on each nozzle.
    Specification:Input diameter: 1.75mm
    Output diameter: 1mm
    Material: brass
    Thread: M6
    Weight: Approx. 28g
    Package list:10 * 1mm Extruder Nozzles
    Note:1. Please allow slight error due to manual measurement.
    2. Different monitor colors may be different. Thanks for your kind understanding.
  • Nincs szín - Időzítő tárcsák 5 mm-es furatú nyomtatógörgő a régi cseréjéhez nyomtatáshoz

    984,00 Ft
    Features:
    Its pitch is short, a more uniform transmission.
    It gives better smoothness and accuracy of positioning, resulting in better printing quality.
    The GT2 pulley with 60 teeth or grooves is one of the best choices for printer construction.
    Compared with the T2.5 timing pulley, the GT2 pulley tooth is anti-backlash.
    Made of high quality aluminum, working, durable in use.
    Specifications:
    Material: aluminum
    Model: 2GT (GT2)
    Synchronous wheel size:
    tooth number: 60
    teeth pitch:2mm/0.079inch
    inner hole diameter: 5mm/0.20inch
    tooth width: 9mm/0.35inch
    Bandwidth: 6mm/0.24inch
    Screw size: 3mm/0.12inch in diameter and 5mm/0.20inch long
    Wrench size: 46*17mm/1.81*0.67inch
    Suitable for: printer
    Package Included:
    1 x GT2 Timing Belt Pulleys
    1 x Wrench
    2 x Screw
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
  • Nincs szín - 5PCS 3D nyomtató M6 rozsdamentes acél extruder fúvóka nyomtatófej 3 mm-es szálhoz

    1 019,00 Ft
    Features:1. With bright luster and clear lettering, which shows great quality and easy to identify the size.
    2. chamfer can reduce drag and avoid blocking the nozzle.
    3. Made of stainless steel, rustproof and durable for long term use.
    4. Good sealing performance to prevent ink leakage.
    5. Carefully crafted to the concentricity and roundness of the hole.
    Specifications:Material: Stainless Steel
    Nozzle Tip Diameter: 0.4mm,0.5mm, 0.6mm, 0.8mm (Optional)
    Suitable: For 3mm Filament Printer
    Installing Mode: External Thread Connection
    Thread: M6
    Working Temperature: 280℃
    Working Pressure: 280Pa
    Weight: Approx. 3g
    Package Included:5 x Stainless Steel Nozzle
  • Nincs szín - 20 fogaskerék nélküli alumínium szíjtárcsa szíjtárcsa 5db 10 mm nyomtatószíj szélességhez

    1 021,00 Ft
    Description:
    This synchronous aluminum belt pulley is designed for 3D printer. It is an 3D printer accessory for 10mm wide belt. As an synchronous pulley wheel, you will find it perfect for 3D printer or similar projects.
    Features:
    Adopt high quality aluminum alloy, excellently machined, finished smoothly.
    This pulley is for 10mm width 2GT timing belt.
    Comes total 5pcs belt pulleys in one bag which you may use a long time.
    Perfect choice for building a 3D printer or similar projects.
    Also good replacement parts for old or broken 3D printer belt pulley.
    Specifications:
    Material: Aluminum Alloy
    Type: Smooth without teeth
    Height: 13mm / 0.511"
    Outer Diameter: 18mm / 0.708"
    Inner Diameter: 5mm / 0.196"
    Belt Width: 10mm / 0.393"
    Quantity: 5
    Weight: 24g(approx.)
    Package Includes:5 x Belt Pulleys
    Note:1. Please allow 1-2mm error due to manual measurement. Thanks for your understanding.
    2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
    3. New-style and old-style are shipped randomly.
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
  • Nincs szín - 5 db M6 0,6 mm-es rozsdamentes acél extruder fúvóka nyomtatófej 1,75 mm-es 3D nyomtatóhoz

    1 021,00 Ft
    Features:1. High quality with bright luster, suitable for Printer.
    2. chamfer can reduce drag and avoid blocking the nozzle.
    3. Made of stainless steel, rustproof and durable for long term use.
    4. Good sealing performance to prevent ink leakage.
    5. Carefully crafted to the concentricity and roundness of the hole.
    Specifications:Material: Stainless Steel
    Nozzle Tip Diameter: 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm (Optional)
    Suitable: For 1.75mm Filament Printer
    Installing Mode: External Thread Connection
    Thread: M6
    Working Temperature: ℃
    Working Pressure: 280Pa
    Weight: Approx. 3g
    Package Include:5 x Stainless Steel Nozzle
  • 2 méter - GT2 fogasszíj 4db 16 fog belső lyuk 5mm szinkron kerék 3D nyomtatóhoz

    1 027,00 Ft
    Features:
    1. The pulley is made of high quality aluminum material: Durable and practical.
    2. 2mm spacing: Designed for linear motors.
    3. TThe GT2 pulley can be used with the GT2 belt: it is very convenient to use.
    4. Cylinder shape: ensures smooth installation of the belt teeth.
    5. 16 teeth in contact with the belt: Minimize the possibility of belt slippage.
    6. This product is applicated to 3d printer and engraving machine.
    Specification:
    Belt:
    Belt name: GT2
    Length: Approx. 2m / 6.6ft ; 5m / 16.4ft (Optional)
    Spacing: approx. 2mm / 0.1inch
    Width: approx. 6mm / 0.2inch
    Pulley:
    Material: aluminum
    Teeth: 16
    Teeth spacing: approx. 2mm / 0.1inch
    Teeth width: approx. 7mm / 0.3inch
    Inner hole: approx. 5mm / 0.2inch
    Package List:
    1 * Timing belt
    4 * Synchronous wheel
  • Nincs szín - 5 db M6 0,2 mm-es rozsdamentes acél extruder fúvóka nyomtatófej 1,75 mm-es 3D nyomtatóhoz

    1 073,00 Ft
    Features:1. High quality with bright luster, suitable for Printer.
    2. chamfer can reduce drag and avoid blocking the nozzle.
    3. Made of stainless steel, rustproof and durable for long term use.
    4. Good sealing performance to prevent ink leakage.
    5. Carefully crafted to the concentricity and roundness of the hole.
    Specifications:Material: Stainless Steel
    Nozzle Tip Diameter: 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm (Optional)
    Suitable: For 1.75mm Filament Printer
    Installing Mode: External Thread Connection
    Thread: M6
    Working Temperature: ℃
    Working Pressure: 280Pa
    Weight: Approx. 3g
    Package Include:5 x Stainless Steel Nozzle
  • Nincs szín - 13PC fúvóka J-fejű extruder rozsdamentes acél 0,2-1,0 mm -V5 / V6 nyomtatóhoz

    1 131,00 Ft
    Features:
    High quality material - Made of durable stainless steel, wear resistant for extended nozzle life.
    Specifications - Input diameter 1.75mm, output diameter 0.2mm, 0.4mm 0.6mm 0.8mm 1.0mm.
    Wide compatibility - Compatible with all 1.75mm pla abs printers.
    Easy Installation - External M6 threaded connection.
    Natural metallic color - Looks and tidy.
    Specification:
    Product Name: Nozzle Full Metal J-head Print Head
    Size: approx. 7*12Mm / 0.3 * 0.5 inch
    Material: high quality stainless steel
    Color: metallic color
    Nozzle accuracy: 0.2/0.4/0.6/0.8/1.0mm/1.75
    Screw outer diameter: 6mm
    Weight: approx. 2g
    Package List:
    0.4mm Nozzle * 5
    0.2/0.6/0.8/1.0mm Nozzle * 2
    Note:
    These print heads are small parts, please keep away from children to avoid the of swallowing.
  • Nincs szín - 2 méteres gumi vezérműszíj 2db 5mm 20Teet fogaskerék kulcs 3D nyomtató

    1 135,00 Ft
    Features:
    High positioning accuracy and repeatability.
    High quality pulley for 5mm diameter shaft.
    6 mm wide, stretch-resistant fiberglass reinforced rubber GT2 timing belt.
    It is designed for linear motion and precision.
    This item is a set of 3D Printer accessories. There is one piece of timing belt and two timing pully wheels which are working together.
    Specification:Timing belt:Width: 6mm/0.24in
    Length: 2m/6.56ft
    Colour: Black
    Material: Rubber
    Timing Pulleys:Number of teeth: 20
    Diameter: 5mm/0.20in
    Material: Aluminum Alloy
    Package list:2 * Timing Pulley Wheel
    1 * Timing Belt
    1 * Spanner
  • Nincs szín - 10 db 0,5 mm-es extruder fúvóka M6 1,75 mm az Mk8 Prusa I3 3D nyomtató tartozékaihoz

    1 174,00 Ft
    Features:
    External thread: M6.
    Ideal nozzle replacement, easy to install and replace.
    High-quality brass material - Extruder brass nozzle is made of durable brass material, which is not easy to rust or corrode and has a long service life.
    Wide compatibility - Compatible with all 1.75mm ABS / PLA 3D printers, can be used for Makerbot Creality CR-10 / MK8 Makerbot Reprap Prusa I3 printers, etc.
    The 3d printer nozzle effectively prevents printhead leakage and produces consistent print results with smooth and glossy finish. Reduce the resistance of the corners and avoid using rounded chamfers to block the filaments. It is easy to identify the engraving size on each nozzle.
    Specification:Input diameter: 1.75mm
    Output diameter: 0.5mm
    Material: brass
    Thread: M6
    Weight: Approx. 2g
    Package list:10 * 0.5mm Extruder Nozzles
    Note:1. Please allow slight error due to manual measurement.
    2. Different monitor colors may be different. Thanks for your kind understanding.
  • Nincs szín - Extruder sárgaréz fúvóka 3D nyomtató fúvókák, tartósak az 1,75 mm-es PLA ABS 3D nyomtatóhoz

    1 287,00 Ft
    Features:
    Made of durable and high class brass, durable and serviceable.
    Multiple size for your different requirements - 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm.
    Applications - suitable for 3D printer Makerbot -10, MK8 Makerbot Reprap I3.
    Wide Compatibility - compatible with all 1.75mm PLA ABS 3D printer.
    Easy to install, connect to M6 external thread.
    Specifications:
    Product name: printer nozzle
    Material: brass
    Nozzle size: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm
    Input diameter: 1.75mm
    Output diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm
    Out thread: M6
    Weight: Approx 57.5g/2oz
    Dimensions: Approx 7 * 5 * 0.5cm/2.8 * 2 * 0.2inch (L * W * H)
    Package list:
    2 * 0.2mm Nozzles
    2 * 0.3mm Nozzles
    18 * 0.4mm Nozzles
    2 * 0.5mm Nozzles
    2 * 0.6mm Nozzles
    2 * 0.8mm Nozzles
    2 * 1.0mm Nozzles
  • Nincs szín - 10db univerzális fekete műanyag kerek alakú gomb fogantyú M6 * 25 szerszámgéphez

    1 310,00 Ft
    Features:
    These knob handles are made of high quality plastic for durability and long service life.
    The surface is well polished which can offer a comfortable grip feeling.
    There are total 10 pieces of knob handles in one set that you can use for many machine tools.
    These knob handles are universally fit and can be used for all types of machine tools.
    They are great accessories to replace your old or broken knob handles.
    Specifications:
    Color: Black
    Size(thread*OD): M6*25
    Material: Plastic
    Suitable Machine Tool: All types
    Quantity: 10pcs
    Weight: 91g(approx.)
    Package Includes:
    10 x Knob Handles
    Note: Please allow small size error due to manual measurement. Thanks for your understanding.
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
  • Nincs szín - Nyomtató -10 4S / 5S fogasszíj rögzítő lemez csapágy rögzítő lemez 10 mm szélességű

    1 371,00 Ft
    Feature:1. Made of high quality metal material, durable and long service life
    2. Great workmanship and high quality, good accessories for printer
    3. The belt width is 10mm which is suitable for original models
    4. Precise size for easy and convenient installation
    5. The product is suitable for Creality S4 / printer
    Specification:
    Item Type: Printer Timing Belt Fixing Plate
    Material: Metal
    Color: Black
    Belt Width: Approx. 10mm / 0.4in
    Fitment: For Creality S4 / Printer: -10 4S / 5S
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
    Package List:1 x Bearing Fixing Plate
  • Nincs szín - 1 db kerek 3 küllős kézikerék eszterga marógéphez 12 * 100 mm fekete

    1 540,00 Ft
    Descriptions:
    The lathe milling hand wheel is made of high quality plastic, modern-design, strong insulation and durable in use. It is widely used in industrial machine tools, such as milling machine, lathes, grinders etc.
    Features:
    The Lathe milling hand wheel is made of high quality plastic, modern-design, strong insulation and durable in use.
    These hand wheels are bored to the standard shaft diameter for their size, and are also tapped for a removable handle.
    The hand wheel comes with screw hole for easy handle assembly.
    Hand wheels are for any application where general or precise adjustments need to be made via a turning mechanism.
    It is widely used in industrial machine tools, such as milling machine, lathes, grinders etc.
    Specification:
    Type: hand wheel
    Material: plastic
    Outer diameter: 100 mm/3.94inch
    Hole diameter: 12mm/0.47inch
    Weight: 129g
    Package Included:
    1 x hand wheel
  • Nincs szín - 5 x M6 nyomtató rozsdamentes acél extruder fúvóka nyomtatófej 1,75 mm-es szálhoz

    1 555,00 Ft
    Features:1. High quality with bright luster, suitable for Printer.
    2. chamfer can reduce drag and avoid blocking the nozzle.
    3. Made of stainless steel, rustproof and durable for long term use.
    4. Good sealing performance to prevent ink leakage.
    5. Carefully crafted to the concentricity and roundness of the hole.
    Specifications:Material: Stainless Steel
    Nozzle Tip Diameter: 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm (Optional)
    Suitable: For 1.75mm Filament Printer
    Installing Mode: External Thread Connection
    Thread: M6
    Working Temperature: 280℃
    Working Pressure: 280Pa
    Weight: Approx. 3g
    Package Include:5 x Stainless Steel Nozzle
  • Nincs szín - Légáramlást megtakarító kenőanyagok vezérműszíj vezérműtárcsa fém készlet a hűtőkőhöz

    1 935,00 Ft
    Air Flow Save Lubricants Timing Belt Timing Pulley Set Metal for Cooling Stone
    Description:
    The set 3D printer kit includes a timing belt, pulleys, screws and a wrench. A timing belt is a non-slipping mechanical drive belt. This is synchronous belt is designed for 3D printer. Belt pulley is an 3D printer accessory for 6mm wide belt. As an synchronous pulley wheel, you will find it perfect for 3D printer or similar projects.
    Features:
    Belt is made of rubber material, very flexible.
    Pulley adopt high quality aluminum alloy, excellently machined, finished smoothly.
    Belt is 6mm wide, low noise, high wear resistance.
    Excellent process, good quality and durable.
    Perfect choice for building a 3D printer or similar projects.
    Specifications:
    Type: 2GT
    Material: Rubber(belt), aluminum alloy(pulley)
    Pulley Inner Diameter: 8mm / 0.3in
    Belt Width: 6mm / 0.23in
    Belt Length: 5m / 16.4ft
    Weight: 87g(approx.)
    Package Includes:8 x 2GT Timing Pulleys
    1 x Timing Belt
    16 x Screws
    1 x Wrench
    Note:Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
  • Nincs szín - 3. kerek küllő kézikerék eszterga marógéphez 12 * 125 mm fekete

    2 130,00 Ft
    Descriptions:
    The lathe milling hand wheel is made of high quality plastic, modern-design, strong insulation and durable in use. It is widely used in industrial machine tools, such as milling machine, lathes, grinders etc.
    Features:
    The lathe milling hand wheel is made of high quality plastic, modern-design, strong insulation and durable in use.
    These hand wheels are bored to the standard shaft diameter for their size, and are also tapped for a removable handle.
    The hand wheel comes with screw hole for easy handle assembly.
    Hand wheels are for any application where general or precise adjustments need to be made via a turning mechanism.
    It is widely used in industrial machine tools, such as milling machine, lathes, grinders etc.
    Specification:
    Type: hand wheel
    Material:plastic
    Outer diameter: 125 mm/4.92inch
    Hole diameter: 12mm/0.47inch
    Handle height: 8cm/3.14inch
    Weight: 248g
    Package Included:
    1 x hand wheel
  • Nincs szín - Univerzális fűszegély-gyomláló tálca Nagy teherbírású acélkefe gyomvágótányér

    2 612,00 Ft
    Universal Grass Trimmer Weeding Tray Heavy Duty Steel Brush Weed Cutting Plate
    Feature:1. Mower Weeding Tray trimmer head, the edge of the lawn mower's cutter is rounded instead of blade, and the installation is simple.
    2. This is a lawn mower head specially designed for gardens, which can effectively remove all unwanted weeds in the lawn or garden.
    3. Don't worry about the weeds around the trees, you can get to all the weeds around the trees without cutting down or damaging the trees.
    4. High performance, easy to replace, simple and convenient to connect the lawn mower, practical lawn mower accessories.
    5. High-quality high-strength steel material, good hardness, good wear resistance, durable and can be used for a long time.
    Specification:
    Condition: 100% Brand New
    Item Type: Mower Weeding Tray
    Material: High-Strength Steel
    Application Areas: Agriculture, fishery, animal husbandry, aquaculture, forestry
    Type of Accessories: Lawn Mower Accessories
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
    Package List:1 x Mower Weeding Tray
  • Nincs szín - MKS MINI12864 LCD képernyő intelligens memóriakártyával a nyomtató alkatrészei számára GS

    2 804,00 Ft
    Feature:1. Mini12864 LCD is available in a variety of styles to provide a more professional service for your machine.
    2. Designed for small machines, it solves the problem of ordinary 12864 size installation on small machines, and also it supports Chinese! And the price is even cheaper than the 12864OLD!
    3. After the slice file is placed in the memory card, the corresponding file can be selected on the LCD for printing.
    4. The product comes with an encoder for parameter adjustment and file selection printing! For 2560 series motherboard, it needs to be modified the firmware to support.
    5. With more user-friendly , the memory card slot is located on the front side and it is more suitable for the of the chassis.
    Specification:
    Item Type: Printer LCD screen
    Color: Black on white / Black on green (Optional)
    Material: ABS
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
    Package List:
    1 x MINI 12864 LCD Display
    1 x Potentiometer Knob
    2 x For FC Cable
  • Nincs szín - Nyomtató kiegészítők Barkácsszálas doboz újratölthető szárító Fogyasztható szárító GS

    3 581,00 Ft
    Features:1. Made of high quality plastic, durable to use.
    2. Simple and convenient to use.
    3. Fine workmanship makes sure good performance.
    4. 100% brand new and high quality.
    5. Helps you quickly eliminate the moisture from your consumables.
    Specification:Color: White
    Material: Plastic
    Take out the consumables in the printer(cabinet)and regenerate them before use.
    Instructions for use:1. Locate the power(AC220V)indicator on the power plug.
    2. It is energized for about 2-3 hours and regenerated and dried(heated and dehumidified)using a moisture absorbing agent.
    3. Unplug the power and retract the plug so that the moisture card is allowed to stand for 15 minutes to cool.
    4. Put the hygroscopic card into the printer(cabinet)to absorb moisture in the consumables.
    Package List:1 * Consumables Dryer
    1 * Power Cable
  • Nincs szín - 3 küllős esztergakormánykerék 200 * 18 Mm csúszásmentes Bake Lite 3 küllős eszterga

    3 842,00 Ft
    3-spoke Lathe Steering Wheel 200 * 18 Mm Non-slip Bake Lite 3-spoke Lathe
    Feature:
    The product is made of high quality ,sturdy and durable.
    3 spoked design, non-slip, more comfortable to hold.
    Suitable for all types of machine tools.
    Easy to use and install.
    Make your work easier and more efficient.
    Specification:Material:
    Color:
    External diameter: 200mm / 7.9in
    Product dimension: 200*18mm / 7.9*0.7in
    Weight: 631g / 22.2oz
    Package list:1 * 3 Spoked Lathe Handwheel
    Note:The actual product color may deviate from the photo due to light.
    There may be a slight deviation in the measurement of product.
  • Nincs szín - 250 * 22 mm-es orsó Bakelites kézikerék 3 küllős eszterga kézikerék por bevonattal

    5 654,00 Ft
    Feature:The product is made of high quality , sturdy and durable.
    3 spoked design, non-slip, more comfortable to hold.
    Suitable for all types of machine tools.
    Equipped with a handle, it is more labor-saving to rotate.
    Make your work easier and more efficient.
    Specification:Material:
    Color:
    External diameter: 250mm / 9.8in
    Product dimension: 250*22mm / 9.8*0.9in
    Weight: 1047g / 36.9oz
    Package list:1 * 3 Spoked Lathe Handwheel(include handle)
    Note:The actual product color may deviate from the photo due to light.
    There may be a slight deviation in the measurement of product..wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
  • Nincs szín - Könnyen használható PLA Filament 3D nyomtató fogyóeszközök otthoni dekoráció 3D nyomtatóhoz

    5 944,00 Ft
    Easy to Use PLA Filament 3D Printer Consumables for Home Decoration 3D Printer
    Feature:1. High quality 1.75mm 1KG PLA printer filament, the tolerance is /-0.05mm.
    2. Excellent material, easy to print, easy to operate and convenient to use.
    3. The printing filament is widely used in home decoration, toys, gifts, etc.
    4. Filamentous PLA is easy to process, such as grinding, polishing, cutting, injection and painting
    5. 10-20% polyester makes the printer long filament become more shiny.
    Specification:
    Condition: 100% Brand New
    Item Type: Printer Filament
    Material: PLA Wire
    Color: Black
    Filament Diameter: Approx. 1.75mm / 0.1in
    Tolerance: /-0.05mm
    Printing Temperature: 190-220℃
    Hot Bed Temperature: Not required, but can be used (up to 50℃)
    Print Speed: 20-50mm/s
    Net Weight: Approx. 1000g / 35.3oz
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
    Package List:1 Bundle x Printer Filament
    Note:Keep sealed when not in use.
  • Nincs szín - PLA Filament 1kg nyomtatási anyag 1 csomag nyomtató fogyóeszközök 1,75 mm

    6 194,00 Ft
    Feature:1. With exquisite craftsmanship, 10-20% polyester makes the filament more shiny.
    2. Easy to print, such filament can be widely used for home decoration, toys, gifts, etc.
    3. Filamentous PLA is easy to process, such as grinding, polishing, cutting, injection and painting
    4. Practical adoptability, printer filament's high quality can keep its high durability for a long time.
    5. After many inspections before leaving the factory, PLA filament quality is guaranteed, you can use it with confidence.
    Specification:
    Item Type: Printer filament
    Material: PLA Wire
    Color: Gray
    Filament Diameter: Approx. 1.75mm / 0.1in
    Tolerance: /-0.05mm
    Printing Temperature: 190-230℃
    Hot Bed Temperature: Not required, but can be used (up to 50℃)
    Print : 20-50mm/s
    Net Weight: Approx. 1000g / 35.3oz
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
    Package List:1 Bundle x Printer Filament
    Note:Keep sealed when not in use.
  • US PLUG - 3D nyomtató Ender3 / 3S 220x220x250mm nagy pontosságú, nagy nyomtatási mérethez

    80 980,00 Ft
    Feature:1. For Ender3/3S structure 3D printer has very stable structure designing without affecting printing accuracy
    2. Perfect print size can meet your general needs, more affordable than large‑size printers.
    3. The printer is featured with high‑accuracy printing, smooth surface, beautiful appearance standard.
    4. With high quality, the product is a very good choice for you to purchase.
    5. The printer is characterized by sturdy appearance and stable performance.
    Specification:Item Type: TronHoo T220S 3D Printer
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
    Brand: TronHoo
    Nozzle Moving Speed: 200mm/s
    Print Size: Approx. 220 x 220 x 250mm / 8.7 x 8.7 x 9.8in
    Consumables: Approx. 1.75mm / 0.07in
    Maximum Nozzle Temperature: 260 ℃
    Maximum Temperature of Hot Bed: 100 ℃
    Connection Port: USB, memory card
    Floor Height: 0.1mm
    Display Screen: 3.5in TFT touch screen
    XYZ Accuracy: 0.05mm, 0.05mm, 0.1mm
    Support File Format: For Gcode Gco
    Print Speed: 150mm/s
    Voltage: AC100-120V/AC220-240V
    Power: 300W
    Package List:
    1 x Printer Base
    1 x Printer Stand
    1 x User Manual
    1 x Bracket
    1 x Plug
    1 x Plier
    8 x Screw
    2 x Nozzle
    1 x U Disk
    4 x Hex Socket Wrench
    2 x Hex Wrench
    1 x Fuse
    Note:
    Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
  • Szürke - Prémium 3D nyomtatószálhoz 1,75 mm ABS a MakerBot különféle színekhez

    465,00 Ft
    Premium For 3D Printer Filament 1.75mm ABS For MakerBot Various Colors
    3D filament to be used with your 3D printing device See the following specifications.
    *ABS plastic filament
    * Size: 1.75mm
    *Quantity: 5meters(1Pack)/50meters(10Pack x 5meters)
    * Colour Available: White, Black, Yellow, Red, Green, Purple, Orange, Dark Blue, Gray, Gold, Silver (Select from menu)
    *Contains: 1Pack/10Pack
    *Pictures are used for reference and colours may vary slightly due to lighting in pictures.
    ABS:
    is very durable and strong, slightly flexible and quite resistant to heat. 3D printers able to process ABS plastics operate with a hot end at a temperature around 220-260°C . ABS is lightweight and can both be injection molded and extruded. It is used in a very large variety of applications in the industry. Objects made of ABS are high quality and good-looking. The high temperature of melting makes layers less visible and more smooth. ABS is more elastic plastic and resistant to brittleness and bending. This material can be post-processed such as grinding, drilling, etc. It is susceptible to chemicals, e.g. acetone dissolves the material and smoothing the surface.It is suited for objects that need to withstand rough usage. It can be used for parts that are subject to mechanical stress, for interlocking parts or pin-joints.
  • Piros - Prémium 3D nyomtatószálhoz 1,75 mm ABS a MakerBot különféle színekhez

    465,00 Ft
    Premium For 3D Printer Filament 1.75mm ABS For MakerBot Various Colors
    3D filament to be used with your 3D printing device See the following specifications.
    *ABS plastic filament
    * Size: 1.75mm
    *Quantity: 5meters(1Pack)/50meters(10Pack x 5meters)
    * Colour Available: White, Black, Yellow, Red, Green, Purple, Orange, Dark Blue, Gray, Gold, Silver (Select from menu)
    *Contains: 1Pack/10Pack
    *Pictures are used for reference and colours may vary slightly due to lighting in pictures.
    ABS:
    is very durable and strong, slightly flexible and quite resistant to heat. 3D printers able to process ABS plastics operate with a hot end at a temperature around 220-260°C . ABS is lightweight and can both be injection molded and extruded. It is used in a very large variety of applications in the industry. Objects made of ABS are high quality and good-looking. The high temperature of melting makes layers less visible and more smooth. ABS is more elastic plastic and resistant to brittleness and bending. This material can be post-processed such as grinding, drilling, etc. It is susceptible to chemicals, e.g. acetone dissolves the material and smoothing the surface.It is suited for objects that need to withstand rough usage. It can be used for parts that are subject to mechanical stress, for interlocking parts or pin-joints.
  • Ezüst - Prémium 3D nyomtatószálhoz 1,75 mm ABS a MakerBot különféle színekhez

    465,00 Ft
    Premium For 3D Printer Filament 1.75mm ABS For MakerBot Various Colors
    3D filament to be used with your 3D printing device See the following specifications.
    *ABS plastic filament
    * Size: 1.75mm
    *Quantity: 5meters(1Pack)/50meters(10Pack x 5meters)
    * Colour Available: White, Black, Yellow, Red, Green, Purple, Orange, Dark Blue, Gray, Gold, Silver (Select from menu)
    *Contains: 1Pack/10Pack
    *Pictures are used for reference and colours may vary slightly due to lighting in pictures.
    ABS:
    is very durable and strong, slightly flexible and quite resistant to heat. 3D printers able to process ABS plastics operate with a hot end at a temperature around 220-260°C . ABS is lightweight and can both be injection molded and extruded. It is used in a very large variety of applications in the industry. Objects made of ABS are high quality and good-looking. The high temperature of melting makes layers less visible and more smooth. ABS is more elastic plastic and resistant to brittleness and bending. This material can be post-processed such as grinding, drilling, etc. It is susceptible to chemicals, e.g. acetone dissolves the material and smoothing the surface.It is suited for objects that need to withstand rough usage. It can be used for parts that are subject to mechanical stress, for interlocking parts or pin-joints.
  • Sötétkék - Prémium 3D nyomtatószálhoz 1,75 mm ABS a MakerBot különféle színekhez

    465,00 Ft
    Premium For 3D Printer Filament 1.75mm ABS For MakerBot Various Colors
    3D filament to be used with your 3D printing device See the following specifications.
    *ABS plastic filament
    * Size: 1.75mm
    *Quantity: 5meters(1Pack)/50meters(10Pack x 5meters)
    * Colour Available: White, Black, Yellow, Red, Green, Purple, Orange, Dark Blue, Gray, Gold, Silver (Select from menu)
    *Contains: 1Pack/10Pack
    *Pictures are used for reference and colours may vary slightly due to lighting in pictures.
    ABS:
    is very durable and strong, slightly flexible and quite resistant to heat. 3D printers able to process ABS plastics operate with a hot end at a temperature around 220-260°C . ABS is lightweight and can both be injection molded and extruded. It is used in a very large variety of applications in the industry. Objects made of ABS are high quality and good-looking. The high temperature of melting makes layers less visible and more smooth. ABS is more elastic plastic and resistant to brittleness and bending. This material can be post-processed such as grinding, drilling, etc. It is susceptible to chemicals, e.g. acetone dissolves the material and smoothing the surface.It is suited for objects that need to withstand rough usage. It can be used for parts that are subject to mechanical stress, for interlocking parts or pin-joints.
  • fehér - Prémium 3D nyomtatószálhoz 1,75 mm ABS a MakerBot különféle színekhez

    465,00 Ft
    Premium For 3D Printer Filament 1.75mm ABS For MakerBot Various Colors
    3D filament to be used with your 3D printing device See the following specifications.
    *ABS plastic filament
    * Size: 1.75mm
    *Quantity: 5meters(1Pack)/50meters(10Pack x 5meters)
    * Colour Available: White, Black, Yellow, Red, Green, Purple, Orange, Dark Blue, Gray, Gold, Silver (Select from menu)
    *Contains: 1Pack/10Pack
    *Pictures are used for reference and colours may vary slightly due to lighting in pictures.
    ABS:
    is very durable and strong, slightly flexible and quite resistant to heat. 3D printers able to process ABS plastics operate with a hot end at a temperature around 220-260°C . ABS is lightweight and can both be injection molded and extruded. It is used in a very large variety of applications in the industry. Objects made of ABS are high quality and good-looking. The high temperature of melting makes layers less visible and more smooth. ABS is more elastic plastic and resistant to brittleness and bending. This material can be post-processed such as grinding, drilling, etc. It is susceptible to chemicals, e.g. acetone dissolves the material and smoothing the surface.It is suited for objects that need to withstand rough usage. It can be used for parts that are subject to mechanical stress, for interlocking parts or pin-joints.
  • Fekete - Prémium 3D nyomtatószálhoz 1,75 mm ABS a MakerBot különféle színekhez

    465,00 Ft
    Premium For 3D Printer Filament 1.75mm ABS For MakerBot Various Colors
    3D filament to be used with your 3D printing device See the following specifications.
    *ABS plastic filament
    * Size: 1.75mm
    *Quantity: 5meters(1Pack)/50meters(10Pack x 5meters)
    * Colour Available: White, Black, Yellow, Red, Green, Purple, Orange, Dark Blue, Gray, Gold, Silver (Select from menu)
    *Contains: 1Pack/10Pack
    *Pictures are used for reference and colours may vary slightly due to lighting in pictures.
    ABS:
    is very durable and strong, slightly flexible and quite resistant to heat. 3D printers able to process ABS plastics operate with a hot end at a temperature around 220-260°C . ABS is lightweight and can both be injection molded and extruded. It is used in a very large variety of applications in the industry. Objects made of ABS are high quality and good-looking. The high temperature of melting makes layers less visible and more smooth. ABS is more elastic plastic and resistant to brittleness and bending. This material can be post-processed such as grinding, drilling, etc. It is susceptible to chemicals, e.g. acetone dissolves the material and smoothing the surface.It is suited for objects that need to withstand rough usage. It can be used for parts that are subject to mechanical stress, for interlocking parts or pin-joints.
  • Lila - Prémium 3D nyomtatószálhoz 1,75 mm ABS a MakerBot különféle színekhez

    465,00 Ft
    Premium For 3D Printer Filament 1.75mm ABS For MakerBot Various Colors
    3D filament to be used with your 3D printing device See the following specifications.
    *ABS plastic filament
    * Size: 1.75mm
    *Quantity: 5meters(1Pack)/50meters(10Pack x 5meters)
    * Colour Available: White, Black, Yellow, Red, Green, Purple, Orange, Dark Blue, Gray, Gold, Silver (Select from menu)
    *Contains: 1Pack/10Pack
    *Pictures are used for reference and colours may vary slightly due to lighting in pictures.
    ABS:
    is very durable and strong, slightly flexible and quite resistant to heat. 3D printers able to process ABS plastics operate with a hot end at a temperature around 220-260°C . ABS is lightweight and can both be injection molded and extruded. It is used in a very large variety of applications in the industry. Objects made of ABS are high quality and good-looking. The high temperature of melting makes layers less visible and more smooth. ABS is more elastic plastic and resistant to brittleness and bending. This material can be post-processed such as grinding, drilling, etc. It is susceptible to chemicals, e.g. acetone dissolves the material and smoothing the surface.It is suited for objects that need to withstand rough usage. It can be used for parts that are subject to mechanical stress, for interlocking parts or pin-joints.
  • narancssárga - Prémium 3D nyomtatószálhoz 1,75 mm ABS a MakerBot különféle színekhez

    465,00 Ft
    Premium For 3D Printer Filament 1.75mm ABS For MakerBot Various Colors
    3D filament to be used with your 3D printing device See the following specifications.
    *ABS plastic filament
    * Size: 1.75mm
    *Quantity: 5meters(1Pack)/50meters(10Pack x 5meters)
    * Colour Available: White, Black, Yellow, Red, Green, Purple, Orange, Dark Blue, Gray, Gold, Silver (Select from menu)
    *Contains: 1Pack/10Pack
    *Pictures are used for reference and colours may vary slightly due to lighting in pictures.
    ABS:
    is very durable and strong, slightly flexible and quite resistant to heat. 3D printers able to process ABS plastics operate with a hot end at a temperature around 220-260°C . ABS is lightweight and can both be injection molded and extruded. It is used in a very large variety of applications in the industry. Objects made of ABS are high quality and good-looking. The high temperature of melting makes layers less visible and more smooth. ABS is more elastic plastic and resistant to brittleness and bending. This material can be post-processed such as grinding, drilling, etc. It is susceptible to chemicals, e.g. acetone dissolves the material and smoothing the surface.It is suited for objects that need to withstand rough usage. It can be used for parts that are subject to mechanical stress, for interlocking parts or pin-joints.
  • 5mm - GT2 6 mm-es vezérműtárcsa 16-60 fogas alumínium 5-10 mm-es furatú, újrapréselt 3D nyomtatók

    530,00 Ft
    GT2 6mm Timing Pulley 16-60 Teeth Aluminum 5-10mm Bore Fr Reprap 3D Printers
    Details:
    * The GT2 Timing Pulleys are perfect for your Reprap 3D printer or other Project
    * 100% Brand new and high quality.
    * Material: Aluminum Alloy
    * Tooth number: 16/20/30/40/60 (optional)
    * Bore diameter: 5mm/6.35mm/7mm/8mm/10mm(optional)
    * Tooth pitch: 2mm(approx)
    * Belt width: 6mm(approx)
    * Color: Silver(as pictures show)
    16teeth:
    Bore diameter:5mm
    Teeth outer diameter:9.69mm
    Outer diameter: 12.5mm
    Shaft:5mm
    Setscrews:M3
    Overall height:14mm
    20teeth:
    Bore diameter: 5/6/6.35/7/8mm(optional)
    Teeth outer diameter:12.23mm
    Outer diameter: 15.5mm.
    Setscrews:M4
    Overall height:16mm
    30teeth
    Bore diameter:5/8mm. (optional)
    Teeth outer diameter:18.6mm
    Outer diameter: 22mm.
    Setscrews:M4
    Overall height:17mm
    40teeth
    Bore diameter:5/6.35/8/10mm(optional)
    Teeth outer diameter:24.97mm
    Outer diameter: 27mm.
    Setscrews:M4
    Overall height:17mm
    60teeth
    Bore diameter:5/8 mm(optional)
    Teeth outer diameter:37.7mm
    Outer diameter: 40mm.
    Setscrews:M4
    Overall height:17mm
    Package contents:
    1* Pulley
    1* Wrench
    Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness
  • 10mm - GT2 6 mm-es vezérműtárcsa 16-60 fogas alumínium 5-10 mm-es furatú, újrapréselt 3D nyomtatók

    530,00 Ft
    GT2 6mm Timing Pulley 16-60 Teeth Aluminum 5-10mm Bore Fr Reprap 3D Printers
    Details:
    * The GT2 Timing Pulleys are perfect for your Reprap 3D printer or other Project
    * 100% Brand new and high quality.
    * Material: Aluminum Alloy
    * Tooth number: 16/20/30/40/60 (optional)
    * Bore diameter: 5mm/6.35mm/7mm/8mm/10mm(optional)
    * Tooth pitch: 2mm(approx)
    * Belt width: 6mm(approx)
    * Color: Silver(as pictures show)
    16teeth:
    Bore diameter:5mm
    Teeth outer diameter:9.69mm
    Outer diameter: 12.5mm
    Shaft:5mm
    Setscrews:M3
    Overall height:14mm
    20teeth:
    Bore diameter: 5/6/6.35/7/8mm(optional)
    Teeth outer diameter:12.23mm
    Outer diameter: 15.5mm.
    Setscrews:M4
    Overall height:16mm
    30teeth
    Bore diameter:5/8mm. (optional)
    Teeth outer diameter:18.6mm
    Outer diameter: 22mm.
    Setscrews:M4
    Overall height:17mm
    40teeth
    Bore diameter:5/6.35/8/10mm(optional)
    Teeth outer diameter:24.97mm
    Outer diameter: 27mm.
    Setscrews:M4
    Overall height:17mm
    60teeth
    Bore diameter:5/8 mm(optional)
    Teeth outer diameter:37.7mm
    Outer diameter: 40mm.
    Setscrews:M4
    Overall height:17mm
    Package contents:
    1* Pulley
    1* Wrench
    Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness
  • 8mm - GT2 6 mm-es vezérműtárcsa 16-60 fogas alumínium 5-10 mm-es furatú, újrapréselt 3D nyomtatók

    530,00 Ft
    GT2 6mm Timing Pulley 16-60 Teeth Aluminum 5-10mm Bore Fr Reprap 3D Printers
    Details:
    * The GT2 Timing Pulleys are perfect for your Reprap 3D printer or other Project
    * 100% Brand new and high quality.
    * Material: Aluminum Alloy
    * Tooth number: 16/20/30/40/60 (optional)
    * Bore diameter: 5mm/6.35mm/7mm/8mm/10mm(optional)
    * Tooth pitch: 2mm(approx)
    * Belt width: 6mm(approx)
    * Color: Silver(as pictures show)
    16teeth:
    Bore diameter:5mm
    Teeth outer diameter:9.69mm
    Outer diameter: 12.5mm
    Shaft:5mm
    Setscrews:M3
    Overall height:14mm
    20teeth:
    Bore diameter: 5/6/6.35/7/8mm(optional)
    Teeth outer diameter:12.23mm
    Outer diameter: 15.5mm.
    Setscrews:M4
    Overall height:16mm
    30teeth
    Bore diameter:5/8mm. (optional)
    Teeth outer diameter:18.6mm
    Outer diameter: 22mm.
    Setscrews:M4
    Overall height:17mm
    40teeth
    Bore diameter:5/6.35/8/10mm(optional)
    Teeth outer diameter:24.97mm
    Outer diameter: 27mm.
    Setscrews:M4
    Overall height:17mm
    60teeth
    Bore diameter:5/8 mm(optional)
    Teeth outer diameter:37.7mm
    Outer diameter: 40mm.
    Setscrews:M4
    Overall height:17mm
    Package contents:
    1* Pulley
    1* Wrench
    Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness
  • 6mm - GT2 6 mm-es vezérműtárcsa 16-60 fogas alumínium 5-10 mm-es furatú, újrapréselt 3D nyomtatók

    530,00 Ft
    GT2 6mm Timing Pulley 16-60 Teeth Aluminum 5-10mm Bore Fr Reprap 3D Printers
    Details:
    * The GT2 Timing Pulleys are perfect for your Reprap 3D printer or other Project
    * 100% Brand new and high quality.
    * Material: Aluminum Alloy
    * Tooth number: 16/20/30/40/60 (optional)
    * Bore diameter: 5mm/6.35mm/7mm/8mm/10mm(optional)
    * Tooth pitch: 2mm(approx)
    * Belt width: 6mm(approx)
    * Color: Silver(as pictures show)
    16teeth:
    Bore diameter:5mm
    Teeth outer diameter:9.69mm
    Outer diameter: 12.5mm
    Shaft:5mm
    Setscrews:M3
    Overall height:14mm
    20teeth:
    Bore diameter: 5/6/6.35/7/8mm(optional)
    Teeth outer diameter:12.23mm
    Outer diameter: 15.5mm.
    Setscrews:M4
    Overall height:16mm
    30teeth
    Bore diameter:5/8mm. (optional)
    Teeth outer diameter:18.6mm
    Outer diameter: 22mm.
    Setscrews:M4
    Overall height:17mm
    40teeth
    Bore diameter:5/6.35/8/10mm(optional)
    Teeth outer diameter:24.97mm
    Outer diameter: 27mm.
    Setscrews:M4
    Overall height:17mm
    60teeth
    Bore diameter:5/8 mm(optional)
    Teeth outer diameter:37.7mm
    Outer diameter: 40mm.
    Setscrews:M4
    Overall height:17mm
    Package contents:
    1* Pulley
    1* Wrench
    Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness
  • Nincs szín - Prémium 3D nyomtatószálhoz PLA 1,75 mm 5M / 50M 11 szín Elérhető újrapapír

    545,00 Ft
    Premium For 3D Printer Filament PLA 1.75mm 5M/50M 11 Colors Available Reprap
    1.75mm PLA Filaments for 3D Printers
    This quality PLA printer filament is ideal from your 3D printing needs and suitable for both professional and casual printing jobs. We Have a wide range of bright colours that produce tough and durable prints.
    Please note: this listing is for cut lengths, if you require to buy your filament by weight please see our other listings.
    We don't just sell 3D printer filament we also print with it, so you can be sure it's good quality material. This also enables us to offer support to help you get the best from your 3D printer. (Watch out for others selling cheap filament that they haven't tested!)
    PLA filament Polymer properties
    *Print temperature: 190-225°C
    *Raft temperature: 190°C
    *First layer temperature: 225°C
    *Filament diameter: 1.75mm
    *Quantity: 5meters(1Pack)/50meters(10Packx5meters)
    * Colour Available: White, Black, Yellow, Red, Green, Purple, Orange, Dark Blue, Gray, Gold, Silver
    *Contains: 1Pack/10Pack
  • 1220mm - Kerek GT2 öv GT2 csíkos szalag 2GT gumi Tartós Hasznos csúszásgátló 1x Forró

    811,00 Ft
    Round GT2 Belt GT2 Stripe Band 2GT Rubber Durable Useful Non-slip 1x Hot
    Detail:
    *GT2 Belt is designed for linear motion.
    *Fits for 3D Printer RepRap Pulley
    *Round tooth profile guarantees that the belt tooth fits smoothly.
    *Minimizes the chance of the belt slipping.
    *Durable and easy to use.
    *Item Condition:100% Brand New
    *Material:Rubber
    *Color: Black(As Pictures Show)
    *Width:6mm/0.23'' (Approx.)
    *Pitch:GT2
    *Size:110mm/112mm/122mm/158mm/200mm/280mm/300mm/400mm/610mm/852mm/1220mm (optional)
    Package Contents:
    1*GT2 Belt (GT2 Pulley is not included)
    Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
  • 200mm - Kerek GT2 öv GT2 csíkos szalag 2GT gumi Tartós Hasznos csúszásgátló 1x Forró

    584,00 Ft
    Round GT2 Belt GT2 Stripe Band 2GT Rubber Durable Useful Non-slip 1x Hot
    Detail:
    *GT2 Belt is designed for linear motion.
    *Fits for 3D Printer RepRap Pulley
    *Round tooth profile guarantees that the belt tooth fits smoothly.
    *Minimizes the chance of the belt slipping.
    *Durable and easy to use.
    *Item Condition:100% Brand New
    *Material:Rubber
    *Color: Black(As Pictures Show)
    *Width:6mm/0.23'' (Approx.)
    *Pitch:GT2
    *Size:110mm/112mm/122mm/158mm/200mm/280mm/300mm/400mm/610mm/852mm/1220mm (optional)
    Package Contents:
    1*GT2 Belt (GT2 Pulley is not included)
    Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
  • 110mm - Kerek GT2 öv GT2 csíkos szalag 2GT gumi Tartós Hasznos csúszásgátló 1x Forró

    552,00 Ft
    Round GT2 Belt GT2 Stripe Band 2GT Rubber Durable Useful Non-slip 1x Hot
    Detail:
    *GT2 Belt is designed for linear motion.
    *Fits for 3D Printer RepRap Pulley
    *Round tooth profile guarantees that the belt tooth fits smoothly.
    *Minimizes the chance of the belt slipping.
    *Durable and easy to use.
    *Item Condition:100% Brand New
    *Material:Rubber
    *Color: Black(As Pictures Show)
    *Width:6mm/0.23'' (Approx.)
    *Pitch:GT2
    *Size:110mm/112mm/122mm/158mm/200mm/280mm/300mm/400mm/610mm/852mm/1220mm (optional)
    Package Contents:
    1*GT2 Belt (GT2 Pulley is not included)
    Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
  • 610mm - Kerek GT2 öv GT2 csíkos szalag 2GT gumi Tartós Hasznos csúszásgátló 1x Forró

    718,00 Ft
    Round GT2 Belt GT2 Stripe Band 2GT Rubber Durable Useful Non-slip 1x Hot
    Detail:
    *GT2 Belt is designed for linear motion.
    *Fits for 3D Printer RepRap Pulley
    *Round tooth profile guarantees that the belt tooth fits smoothly.
    *Minimizes the chance of the belt slipping.
    *Durable and easy to use.
    *Item Condition:100% Brand New
    *Material:Rubber
    *Color: Black(As Pictures Show)
    *Width:6mm/0.23'' (Approx.)
    *Pitch:GT2
    *Size:110mm/112mm/122mm/158mm/200mm/280mm/300mm/400mm/610mm/852mm/1220mm (optional)
    Package Contents:
    1*GT2 Belt (GT2 Pulley is not included)
    Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
  • 158mm - Kerek GT2 öv GT2 csíkos szalag 2GT gumi Tartós Hasznos csúszásgátló 1x Forró

    593,00 Ft
    Round GT2 Belt GT2 Stripe Band 2GT Rubber Durable Useful Non-slip 1x Hot
    Detail:
    *GT2 Belt is designed for linear motion.
    *Fits for 3D Printer RepRap Pulley
    *Round tooth profile guarantees that the belt tooth fits smoothly.
    *Minimizes the chance of the belt slipping.
    *Durable and easy to use.
    *Item Condition:100% Brand New
    *Material:Rubber
    *Color: Black(As Pictures Show)
    *Width:6mm/0.23'' (Approx.)
    *Pitch:GT2
    *Size:110mm/112mm/122mm/158mm/200mm/280mm/300mm/400mm/610mm/852mm/1220mm (optional)
    Package Contents:
    1*GT2 Belt (GT2 Pulley is not included)
    Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
  • 280mm - Kerek GT2 öv GT2 csíkos szalag 2GT gumi Tartós Hasznos csúszásgátló 1x Forró

    623,00 Ft
    Round GT2 Belt GT2 Stripe Band 2GT Rubber Durable Useful Non-slip 1x Hot
    Detail:
    *GT2 Belt is designed for linear motion.
    *Fits for 3D Printer RepRap Pulley
    *Round tooth profile guarantees that the belt tooth fits smoothly.
    *Minimizes the chance of the belt slipping.
    *Durable and easy to use.
    *Item Condition:100% Brand New
    *Material:Rubber
    *Color: Black(As Pictures Show)
    *Width:6mm/0.23'' (Approx.)
    *Pitch:GT2
    *Size:110mm/112mm/122mm/158mm/200mm/280mm/300mm/400mm/610mm/852mm/1220mm (optional)
    Package Contents:
    1*GT2 Belt (GT2 Pulley is not included)
    Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
  • 300mm - Kerek GT2 öv GT2 csíkos szalag 2GT gumi Tartós Hasznos csúszásgátló 1x Forró

    619,00 Ft
    Round GT2 Belt GT2 Stripe Band 2GT Rubber Durable Useful Non-slip 1x Hot
    Detail:
    *GT2 Belt is designed for linear motion.
    *Fits for 3D Printer RepRap Pulley
    *Round tooth profile guarantees that the belt tooth fits smoothly.
    *Minimizes the chance of the belt slipping.
    *Durable and easy to use.
    *Item Condition:100% Brand New
    *Material:Rubber
    *Color: Black(As Pictures Show)
    *Width:6mm/0.23'' (Approx.)
    *Pitch:GT2
    *Size:110mm/112mm/122mm/158mm/200mm/280mm/300mm/400mm/610mm/852mm/1220mm (optional)
    Package Contents:
    1*GT2 Belt (GT2 Pulley is not included)
    Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
  • Nincs szín - GT2 6 mm-es vezérműtárcsa 16T-60T Alumium 4-12 mm-es furattal FIT a 3D-s nyomtatás CNC

    552,00 Ft
    GT2 6mm Timing Pulley 16T-60T Alumium 4-12mm Bore FIT For Reprap 3D Printer CNC
    Details:
    * The GT2 Timing Pulleys are perfect for your Reprap 3D printer or other Project
    * 100% Brand new and high quality.
    * Material: Aluminum Alloy
    * Tooth number: 16/20/30/40/60 (optional)
    * Bore diameter: 5mm/6.35mm/7mm/8mm/10mm(optional)
    * Tooth pitch: 2mm(approx)
    * Belt width: 6mm(approx)
    * Color: Silver(as pictures show)
    16teeth:
    Bore diameter:5mm
    Teeth outer diameter:9.69mm
    Outer diameter: 12.5mm
    Shaft:5mm
    Setscrews:M3
    Overall height:14mm
    20teeth:
    Bore diameter: 5/6/6.35/7/8mm(optional)
    Teeth outer diameter:12.23mm
    Outer diameter: 15.5mm.
    Setscrews:M4
    Overall height:16mm
    30teeth
    Bore diameter:5/8mm. (optional)
    Teeth outer diameter:18.6mm
    Outer diameter: 22mm.
    Setscrews:M4
    Overall height:17mm
    40teeth
    Bore diameter:5/6.35/8/10mm(optional)
    Teeth outer diameter:24.97mm
    Outer diameter: 27mm.
    Setscrews:M4
    Overall height:17mm
    60teeth
    Bore diameter:5/8 mm(optional)
    Teeth outer diameter:37.7mm
    Outer diameter: 40mm.
    Setscrews:M4
    Overall height:17mm
    Package contents:
    1* Pulley
    1* Wrench
    Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness
  • Arany - 10 darab X5m sztereoszkópikus PLA nyomtatószál 1,75 mm-es 3-D rajzú nyomtató tollhoz

    554,00 Ft
    1.75mm PLA Filaments for 3D Printers
    This quality PLA printer filament is ideal from your 3D printing needs and suitable for both professional and casual printing jobs. We Have a wide range of bright colours that produce tough and durable prints.
    Please note: this listing is for cut lengths, if you require to buy your filament by weight please see our other listings.
    We don't just sell 3D printer filament we also print with it, so you can be sure it's good quality material. This also enables us to offer support to help you get the best from your 3D printer. (Watch out for others selling cheap filament that they haven't tested!)
    PLA filament Polymer properties
    *Print temperature: 190-225°C
    *Raft temperature: 190°C
    *First layer temperature: 225°C
    *Filament diameter: 1.75mm
    *Quantity: 5meters(1Pack)/50meters(10Packx5meters)
    * Colour Available: White, Black, Yellow, Red, Green, Purple, Orange, Dark Blue, Gray, Gold, Silver
    *Contains: 1Pack/10Pack
  • Szürke - 10 darab X5m sztereoszkópikus PLA nyomtatószál 1,75 mm-es 3-D rajzú nyomtató tollhoz

    554,00 Ft
    1.75mm PLA Filaments for 3D Printers
    This quality PLA printer filament is ideal from your 3D printing needs and suitable for both professional and casual printing jobs. We Have a wide range of bright colours that produce tough and durable prints.
    Please note: this listing is for cut lengths, if you require to buy your filament by weight please see our other listings.
    We don't just sell 3D printer filament we also print with it, so you can be sure it's good quality material. This also enables us to offer support to help you get the best from your 3D printer. (Watch out for others selling cheap filament that they haven't tested!)
    PLA filament Polymer properties
    *Print temperature: 190-225°C
    *Raft temperature: 190°C
    *First layer temperature: 225°C
    *Filament diameter: 1.75mm
    *Quantity: 5meters(1Pack)/50meters(10Packx5meters)
    * Colour Available: White, Black, Yellow, Red, Green, Purple, Orange, Dark Blue, Gray, Gold, Silver
    *Contains: 1Pack/10Pack