PLC-k és HMI-k

Features:
1. High‑quality plastic material, hard, durable and corrosion‑resistant, and also has long service life.
2. Small, light in weight, easy to install and operate, and can be used without complicated steps.
3. Wide temperature control range, temperature control range is ‑50℃‑110℃, control accuracy is 0.1℃.
4. Sophisticated production, provides stable performance, high work efficiency, can better meet your needs.
5. Comes with a high accuracy sensor, you don't need to buy a sensor seperately, saving your cost.
Specifications:Temperature range :-50-110 ℃: 48.5 * 40.1 * 15.8mm
Temperature control mode: ON / OFF
Resolution: When temperature is 0.1℃, the resolution is -9.9~99.9, other temperature segment is 1℃
Control accuracy: 0.1 ℃
Hysteresis accuracy: 0.1℃
rate: 0.5S
High temperature protection: 0-110℃
Supply voltage: DC 12V
Static current: ≤ 35MA, attract current ≤ 65MA
Output voltage: DC 12V
Output power: 10A relay
Measurement input: NTC (10K 0.5% ) Waterproof Sensor
Environmental requirements: -10 ~ 60 ℃ , Humidity 20% -85%
How to use:Connect the power supply and the load, you can supply to the controller,
Is displayed as a measured temperature,
Press the SET button, the display flashes the temperature,
Press - to set the desired temperature,
After setting press SET to confirm return,
The controller automatically performs the relay by setting off!
Lights, LED status descriptions:Indicator: Off The relay is switched off, Always indicate the relay is .
LED: Shows LL is the sensor open, showing ?HH is out of range, the thermostat will be forced to close the relay, the display --- as high temperature protection.
Package Included:
1 x 12V W1209 Digital thermostat Temperature Control Switch Sensor
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Feature:1. We provide 23 kind of switch of different acting temperature.
2. Suitable for disinfecting cupboards, electric boiling water bottles, coffee pots, warm water bags, water dispensers, microwave ovens, etc.
3. 5 pcs a set can meet your quantity needs.
4. Simple but practical structure makes the switch more stable and durable.
5. The thermostat will protect your battery while charging and prolong its service life 3 times.
Specification:
Item Type:Thermostat Switch
Temperature:40℃/45℃/50℃/55℃/60℃/65℃/70℃/75℃/80℃/85℃/90℃/95℃/100℃/105℃/110℃/115℃/120℃/125℃/130℃/135℃/140℃/145℃/150℃(Optional)
Voltage:250V
Current:15A
Package List:5 x Thermostat Switch

Features:
It is suitable for machine counting applications such as press and printing press.
5 digit pull counter is used to accumulate the number of times of the recording instrument or mechanical reciprocating movement.
Connect the auxiliary shaft of the counter, and pull the arm to instrument or machine for pulling counting.
The digital display directly, with a rotating return to device. After returning to , it can start counting from .
Easy to operate, and count accurately, a practical counter tool.
Specification:
Model: D67F
Counting range: 0-99999
Count form: pull type
Scope of application: industrial counting
Installation: screw fixation
Technical :≤200 times/s
Reset mode: return to rotation count, cycle count
Weight: Approx.82g/2.9oz
Use method:
1.Pull once Count one, automatic carry.
2.Rotating handle Clockwise rotation,The display numbers are all "0" words.
Package list:
1 x Mechanical Counter
Note:
The inner wheel is made of special plastic. It is not suitable to contact toluene, and slightly add oil when cleaning.

Features:
Using SMD patch technology, high accuracy, stable performance.
On-board MCU chip for more intelligent control.
The module has been tested for stability, consistency and reliability.
Wide temperature measuring range -50~110°C, error 0.1℃ only.
When exceeding the measuring range, the temperature controller will force the relay to disconnect.
Specification:
Item Type: Digital Thermostat
Temperature Sensor Type: NTC(10K 0.5% ) waterproof sensor
Display Type: 0.28inch 3-bit digital tube
Temperature Range: -50~110°C
Resolution: 0.1℃ (9.9~99.9℃), 1℃ (other)
Temperature Control Mode: On/Off
Temperature Control Accuracy: 0.1℃
High Temperature Protection: 0-110℃
Frequency: 0.55s
Return Difference Accuracy: 0.1℃
Input Voltage: DC 12V
Output: 10A One-Channel Relay
Static Current: ≤35MA
Suction Current ≤65MA
Environmental Requirements: -10 ~ 60℃, 20% -85% RH
Instructions:
Long press SET for 5s to get menu, starts at P0, press /- to get P-parameter, press set to determine the P-parameter, press /- to set the desired value for the selected parameter, press SET to accept it, long press /- reset to default
Indicator & Digital Tube Status Description:
Indicator: Off - The relay is disconnected, ON - The relay is
Digital Tube: Display LL - Sensor open circuit; Display HH - Exceed the measuring range, the temperature controller will force the relay to disconnect; Display ----- - High temperature protection
Parameter Setting:
Setting Comparison Table
Description Setting Range Factory Setting
P0 Refrigeration/Heating C/H C
P1 Return Difference Setting 0.1-15 2
P2 Maximum Setting Limit 110 110
P3 Minimum Setting Limit -50 -50
P4 Temperature Correction -7.0~7.0℃ 0
P5 Delay Start Time 0-10min 0
P6 High Temperature Alarm 0-110℃ OFF
Package List:
2 x Digital Thermostat

Description:
Made of quality materials, this tally is durable for years. It's portable and lightweight, easy to take with. It's -engineered to the precise count. This counter offers a 4-figure register, ranges from 0000 to 9999, and the white number is clear on the black background. With no battery, it's powered by your hand, and it's easy to reset. This tally is for sports competition, attendance at a meeting, goods counting in a supermarket, etc. It works well just as you expect.
Features:
Made of good material, durable and lightweight.
With a , it can be attached to backpacks or hold in hand.
-engineered, precise count.
Offers a 4-figure register, counts to 9,999.
No battery needed, and easy to reset.
Specification:
Material: Metal Plastic
Color: Silver
Diameter: approx. 5.6cm / 2.2in
Height: approx. 6cm / 2.4in
Weight: approx. 57g
Package List:
1 x Hand Tally Only

Metal Manual Counter 4 Digit Silver Bead Aluminum Alloy Plated 0-9999 Click
Feature:1. Metal case with beautiful appearance, small body, comfortable to hold
2. Easy to use and carry, can be cleared
3. Large counting, the record can be up to 9999 times
4. Fine workmanship and long service life
5. Widely used in various data statistics, conference attendance and traffic flowing, etc.
Specification:
Item Type: Hand Tally Counter
Brand: BERM
Color: Silver
Type: With hook (metal knob reset)
Material: Aluminium Alloy
Counting Range: 0-9999 (4-digits)
Diameter: Approx. 46mm / 1.8in
Thickness: Approx. 30mm / 1.2in
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Hand Tally Counter

Feature:1. Metal case with beautiful appearance, small body, comfortable to hold
2. Easy to use and carry, can be cleared
3. Large counting, the record can be up to 9999 times
4. Fine workmanship and long service life
5. Widely used in various data statistics, conference attendance, traffic flowing, etc.
Specification:
Item Type: Hand Tally Counter
Brand: BERM
Color: Silver
Type: With hook (plastic knob reset)
Material: Aluminium Alloy
Counting Range: 0-9999 (4-digits)
Diameter: Approx. 46mm / 1.8in
Thickness: Approx. 30mm / 1.2in
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Hand Tally Counter

Feature:1. The product is safe, reliable and convenient in use, allows you to stay away from electric fire and wiring.
2. Simple operation, firstly strip off 9-10mm wire jacket, then push up the orange handle and insert the wire into the hole, finally press down the handle.
3. Fireproof and flame retardant nylon housing.
4. Compact and lightweight structure, easy to carry and use.
5. The terminals can be used repeatedly.
Specification:
Item Type: Wire Connector
Model: SPL-2
Rated Voltage: 400V
Rated Impulse Voltage: 4KV
Pole: 2 pole
Insulation Material: Nylon (PA66)
Contact Material: Phosphorus Copper
Wire Section: 0.08 ~ 4.0mm² (single hard wire), 0.08~4.0mm² (soft wire)
Color: Gray Orange
Nominal Current: 32A
Rated power: 7KW
Indicator: 28~12AWG
Stripping Length: 9-10mm
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:5 x Wire Connector

Descriptions:
This 20-pin connector is front connector for the S7-300 and 300V module, connected the filed actuators and sensor's signal to the module, the CPU can detect the signal of the scene. When replacing the module, remove the front connector without rewiring.
Features:
20-pin connector is front connector for the S7-300 and 300V module.
Connected the filed actuators and sensor's signal to the module, the CPU can detect the signal of the scene.
When replacing the module, remove the front connector without rewiring.
With screw-type terminals with cable clamp, the release button, coding element socket, two coding elements on the module.
The first time you insert top cover permanently inserted into the front connector. When replacing the module by coding to avoid errors.
Specifications:
Model: 392-1AJ00-0AA0
Type: terminal
Application scope: S7-300 series PLC
Shape: bar
Production process: injection molding
Features: fire/flame retardant
Contact material: copper
Pin number:20 pin
Working temperature: -30 to 70 degrees
Size:13 x 3 x 2.3cm/5.12 x 1.18 x 0.91inch
Weight: 65g
Package Included:
1 x 20-pin Front Connector
2 x Self-Locking Ties

Descriptions:
This Profibus Bus Connector features ROFIBUS35 °, built-in terminal lead resistance, no programming interface, terminal connector, transmission rate up to 12 Mbit/S. With a built-in terminal matching resistor. and convenient to use, connect the bus cable directly to the DP bus connector and insert the connector socket into the Profibus master/slave interface.
Features:
ROFIBUS35 ° built-in terminal lead resistance, no programming interface, terminal connector.
DP bus connector is the RS485 common interface parts between the PROFIBUS DP protocol master and the slave cable.
Mainly used in manufacturing automation system unit level and the field level
level of communication.
Between the PLC communication port and Profibus cable, the data can be transmitted through a round-robin communication, transmitting the signal at a rate of 12 M bits
With a built-in terminal matching resistor.
The of the connector takes into account the Angle of cable inlet line and the problem of alleviating tension. The built-in grounding metal plate effectively prevents the common mode interference and has strong electromagnetic compatibility performance
Convenient to use, connect the bus cable directly to the DP bus connector and insert the connector socket into the Profibus master/slave interface.
Specifications:
Name: Profibus bus connector (DP head)
Model: 972-0BA41-0XA0
Transmitting rate :12 Mbit/s
Weight:38g
Package Included:
1 x Profibus bus connector

Feature:1. Metal case with base, beautiful appearance aand small body, comfortable to hold
2. Easy to use and carry, can be cleared
3. Large counting, the record can be up to 9999 times
4. Fine workmanship and long service life
5. Widely used in various data statistics, conference attendance, traffic flowing, etc.
Specification:
Item Type: Tally Counter
Brand: BERM
Material: Aluminium Alloy
Color: Silver
Counting Range: 0-9999 (4-digits)
Size: Approx. 45 x 63 x 30mm / 1.8 x 2.5 x 1.2in
Base Size: Approx. 55mm / 2.2in
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Hand Tally Counter

Features:
This is a upgraded fan heater control switch designed with heat sink that will ensures a better heat dissipation.
Universal fit for 12V or 24V, supports high power, 120W@12V, 240W@24V.
Continuously variable type, the rated thermal current is 10A.
Easy to wire, convenient to use, it is a great replacement for broken ones.
Widely used for adjusting of automobile fan heater, defroster, fans, etc.
Specifications:
Voltage: 12V or 24V (universal)
Rated Power: 120W@12V, 240W@24V
Rated Thermal Current: 10A
Size: 62*27*30mm/2.44*1.06*1.18"
Wiring:
Red: Power supply , Motor
Blue: Motor-
: Power supply-
Package Includes:
1 x Switch

This product is used for recording the cumulative number of electronic pulse signal. Widely used in various electric pulse counts in oil, chemical, textile, machinery, mining, national defense, agriculture, food, printing and other industries.
Features:
Six digit electromagnetic counter, which is used to record the cumulative number of electric pulse signals.
High speed counter measurement, accurate count and small indication error.
Combined with secondary instrument, it can be digital display instrument.
It will generate attractive power in the electromagnet after the electrical signal is input to the counter.
Widely used in petroleum, chemical, textile, machinery, mining, defense, agriculture, food, printing and other industries of all kinds of electric pulse count.
Specification:Condition: 100% Brand New
Model: CSK6-YKW
Material: Plastic
Count Range: 0~999999
Voltage: DC 12V, DC 36V (optional)
Range of Voltage Fluctuation: ±10%
Count Speed: 20 times per second
Indication Error: < 1X0.00001
Environment Temperature: -20℃~50℃
Relative Temperature: ≤ 85%
Power: 1.5W
Reset Mode: Pressing Type (with lock)
Installation: Panel Type
Weight: Approx. 114g / 4oz
Package list:1 * Electromagnetic Counter

Features:
100% Brand New and High Quality Fan Temperature Switch.
Direct aftermarket replacement part for the broken one.
According to the factory specifications, perfect fit in.
High characteristic, stable performance.
Fit for HUSQVARNA HUSABERG 2 Stroke & 4 Stroke.
Specifications:Condition: 100% Brand New
Material: Copper
Color: Yellow
Replaces : 0010033661
Size: 4.3 * 2.1cm/1.7 * 0.8in
Package Weight: approx.35g
Fitment: for HUSQVARNA HUSABERG 2 Stroke & 4 Stroke
Package List:1 * Fan Temperature Switch

Feature:1. Adopt high quality industrial-grade 32-bit CPU, stable performance
2. Support for Mitsubishi FX2N series, online monitoring, more convenient to download and use
3. With TTL communication interface, which has stable connecting performance
4. Powered by 24V branch switching power supply, simple to operate
5. Support super encryption 12345678 and the default transmission speed is 19200
Specification:
Item Type: Programmable Controller Board
1: 10MR 6 channel inputs, 4 channel relay outputs
2: 24V branch switching power supply.
3: TTL communication interface
4: Default 19200 transmission speed
5: Super encryption, 12345678
6: Program capacity 4000 can be changed to 2000 by yourself
Optional Style: Board, Board Base, USB to TTL Cable
Can be directly downloaded using for Mitsubishi programming software GXDeveloper or GXworks2 without conversion
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Cable

Features:
Easy to use and connect the wire, fast to respond.
Compact size, high precision, long lifespan.
Mainly used for the machine needed to control the temperature.
High anti-interference ability and stability, perfect temperature control function.
Durable construction for long-lasting performance.
Specification:Name: Intelligent Temperature Controller
Model: REXC-400
Installation method: panel
Working voltage: AC 220V 50-60hz
Rated current: 10A
Main controller output: RELAY out
Weight: 330g
Package List:1 x Intelligent Temperature Controller
2 x Clips

This product is used for recording cumulative total of the number of times of electronic pulse signal. Widely used in various electric pulse counts in oil, chemical, textile, machinery, mining, national defense, agriculture, food, printing and other industries.
Features:
This product is used in recording cumulative total of the number of times of electronic pulse signal.
Combined with secondary instrument,it will be digital display instrument.
Widely used in various electric pulse counts in oil, chemical, textile, machinery, mining, national defense, agriculture, food, printing and other industries.
After input the electric signal to the counter, produce the suction in electromagnet in order to let gag bit spur escapement mechanism then spur the digital rotate cycling calculating in decimal counter.
It will generate attractive power in the electromagnet after the electrical signal input to the counter.
Specification:Model: CSK5-YKW
Material: Plastic, Electronic Parts, Metal
Count range: 0-99999
Voltage: DC 12V, DC 36V (Optional)
Range of voltage fluctuation: ±10%
Count speed: DC20 times/Sec
Indication error: < 1x 0.00001
Environment temperature: - 20 ℃ to 50 ℃
Relative temperature: ≤85%
Power: DC1.5W, AC2.5VA
Reset mode: Pressing type (Interlocking)
Installation: panel type
Package Weight: approx. 112g
Package list:1 * Electromagnetic Pulse Counter

Features:Switch the modes between cool and heat.
Control temperature by setting the temperature set value and the difference value.
It supports temperature calibration function.
Refrigerating control output delay protection.
Alarm when temperature exceeds temperature limit or when sensor error.
Application: aquarium, terrariums, zoo, paludarium, chicken incubator.
Specification:Model: STC-1000
Voltage: 110-220V, 50Hz/60Hz
Current: 10A
Relay Contact Rating: 10A / 250VAC
Temperature Measuring Range: -50℃~99℃
Resolution: 0.1℃
Accuracy: ±1℃(-50℃~70℃)
Sensor Error Delay: 1 minute
Power Consumption: ≤3W
Sensor: NTC sensor (1pc)
Relay Contact Capacity: Cool (10A/250VAC); Heat (10A/250VAC)
Ambient Temperature: 0℃~60℃
Storage Temperature: -30℃~75℃
Ambient Relative Humidity: 20~85% (No condensate)
Sensor Length: 2m / 78.7inch (include the probe)
Size: Approx. 8.5 x 7.5cm / 3.3 x 3in
Weight: Approx. 110g / 3.9oz
Package List:1 x Temperature Controller with Sensor
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

This product is used for recording cumulative total of the number of times of electronic pulse signal. Widely used in various electric pulse counts in oil, chemical, textile, machinery, mining, national defense, agriculture, food, printing and other industries.
Features:
This product is used in recording cumulative total of the number of times of electronic pulse signal.
Combined with secondary instrument,it will be digital display instrument.
Widely used in various electric pulse counts in oil, chemical, textile, machinery, mining, national defense, agriculture, food, printing and other industries.
After input the electric signal to the counter, produce the suction in electromagnet in order to let gag bit spur escapement mechanism then spur the digital rotate cycling calculating in decimal counter.
It will generate attractive power in the electromagnet after the electrical signal input to the counter.
Specification:Model: CSK5-NKW
Material: Plastic, Electronic Parts, Metal
Count range: 0-99999
Voltage: DC 12V, DC 36V (Optional)
Range of voltage fluctuation: ±10%
Count speed: DC20 times/Sec
Indication error: < 1x 0.00001
Environment temperature: - 20 ℃ to 50 ℃
Relative temperature: ≤85%
Power: DC1.5W, AC2.5VA
Reset mode: Pressing type (Interlocking)
Installation: panel type
Package Weight: approx. 109g
Package list:1 * Electromagnetic Pulse Counter

Feature:1. Used for recording the cumulative number of electric pulses, 6‑digit electromagnetic counter keeps high practicality.
2. After the electric signal is input to the counter, a suction force is generated in the electromagnet, causing the armature to drive the escapement mechanism, driving the digital rotation to perform decimal counting.
3. Combined with secondary instruments, this counter can form a digital display instrument.
4. High‑ counter measurement keeps accurate counting, small indication error.
5. Widely used in various electrical pulse counting in petroleum, chemical, machinery and other industries.
Specification:
Item Type: Counter
Model: CSK6-YKW
Rated Voltage: 220V
Counting : AC 10 times/second; DC: 20 times/second
Power: AC: 2.5VA; DC: 1.5W
Counting Range: 0-999999
Material: Plastic
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Counter

This product is used for recording cumulative total of the number of times of electronic pulse signal. Widely used in various electric pulse counts in oil, chemical, textile, machinery, mining, national defense, agriculture, food, printing and other industries.
Features:
This product is used in recording cumulative total of the number of times of electronic pulse signal.
Combined with secondary instrument,it will be digital display instrument.
Widely used in various electric pulse counts in oil, chemical, textile, machinery, mining, national defense, agriculture, food, printing and other industries.
After input the electric signal to the counter, produce the suction in electromagnet in order to let gag bit spur escapement mechanism then spur the digital rotate cycling calculating in decimal counter.
It will generate attractive power in the electromagnet after the electrical signal input to the counter.
Specification:Model: CSK4-YKW
Material: Plastic, Electronic Parts, Metal
Count range: 0-9999
Voltage: DC 12V, DC 36V (Optional)
Range of voltage fluctuation: -15% ~ 10%
Count speed: DC20 times/Sec, AC10 times/Sec
Frequency: 50~60Hz
Indication error: < 1x 0.00001
Environment temperature: - 20 ℃ to 50 ℃
Relative temperature: ≤85%
Power: DC1.5W, AC2.5VA
Reset mode: Pressing type (Interlocking)
Installation: panel type
Package Weight: approx. 114g
Package list:1 * Electromagnetic Pulse Counter

Descriptions:This mini temperature controller, with heat and cool control, can set both a high and a low temperature limit, when the temperature is beyond the compass of limits, it will cool or heat automatically.
Features:
The temperature control range is -40℃ to 120℃.
With large and clear LED display for better readability.
Compatible with refrigeration and heating control.
Return difference is adjustable (1-30℃).
With delay start function.
Temperature upper and lower limit setting function, factory parameter locking function.
Support to restore factory settings.
Support power-down storage (sudden power-off settings are still valid).
Supports temperature correction.
Specifications:
Product model: MH1230A
Working voltage: AC220V
Working current: relay can withstand 30A current
Temperature control: -40 ℃ to 120 ℃
Measurement error: ±0.5℃
Display accuracy: 0.1℃, control accuracy : 1 ℃
Temperature sensor: NTC (10K/3435)
Working temperature: 0 ℃ to 60 ℃
Storage temperature: - 10 ℃ to 60 ℃
Humidity: 90% RH without moisture condensation
Data storage: yes
Relay contact current: AC: 30A/220V, can withstand 6600W load
Temperature controller size: 8.5 x 7.5 x 3.5cm/3.35 x 2.95 x 1.38inch
Sensor: probe: 4 x 25mm/0.16 x 0.98inch, cable: 1m/39.37inch
Weight: 224g
Package Included:
1 x Digital Temperature Controller
1 x Sensor

Descriptions:This mini temperature controller, with heat and cool control, can set both a high and a low temperature limit, when the temperature is beyond the compass of limits, it will cool or heat automatically.
Features:
- 40 ~120 centigrade degree wide temperature measuring range.
With large and clear LED display for better readability.
Compatible with refrigeration and heating control.
Return difference is adjustable (1-30℃).
With delay start function.
Temperature upper and lower limit setting function, factory parameter locking function.
Support to restore factory settings.
Support power-down storage (sudden power-off settings are still valid).
Supports temperature correction.
Scope of application:1. It is widely used in cold storage, cold storage and operation table of various refrigeration management.
2. It is suitable for large-scale farming households with high environmental temperature requirements.
3. Scientific research.
4. Home temperature control.
Specifications:
Product model: MH1210A
Working voltage: DC12V, DC24V, AC110V, AC220V(Optional)
Working current: MAX200mA
Temperature control: -40 ℃ to 120 ℃
Measurement error: ±0.5℃
Display accuracy: 0.1℃, control accuracy: 1 ℃
Temperature sensor: NTC (10K/3435)
Working temperature: 0 ℃ to 60 ℃
Storage temperature: - 10 ℃ to 60 ℃
Humidity: 90% RH without moisture condensation
Data storage: yes
Temperature controller size: 8.5 x 7.5 x 3.5cm/3.35 x 2.95 x 1.38inch
Sensor: probe: 4 x 25mm/0.16 x 0.98inch, cable: 1m/39.37inch
Weight: 141-211g
Package Included:
1 x Digital Temperature Controller
1 x Sensor

Features:
Support ASCII text and RTU dual protocol automatic identification, no user setting in required.
The meter can display 4 digit of serial port.
Wide range of power supply voltage between DC7~36V.
Large 0.56inch display area for only 4 digit ,more clear.
The baud rate can be 1200bps/2400bps/4800bps/9600bps/19200bps/38400bps/57600bps/119200bps.
Specification:Display Digit:4
Display Size:0.56inch
Display Color:Red
Power Supply Voltage:DC 7~36V
Current:30mA
Wiring Diagram:V :Power positive
GND: Negative power supply
A: RS485 BUS A
B: RS485 BUS B (note the wiring sequence, first connect the power cable to confirm the module works normally and then connect the communication line)
Communication interface: non-isolated, 485 bus and GND terminal common ground. If there are multiple devices on the bus, be sure to connect the terminating resistor to the bus end device.
Baud Rate:1200bps/2400bps/4800bps/9600bps/19200bps/38400bps/57600bps/119200bps
Size:79 x 43 x 21.5mm / 3.11 x 1.69 x 0.85in
Installation Size:76 x 39.2mm / 2.99 x 1.54in
Package List:1 x Meter

Features:
counter is a recorder specializing in measuring the length or the various machinery revolving.
Rotating needle, handle, with humanization , use more convenient and quick.
Digital display window, make the display more accurate.
It is commonly used in measuring and recording cable length range, and turning number or winder, etc.
With 5 digital display, while the clockwise turn can progressively increase the digit, the counter-clockwise turn decrease it.
Specifications:
Model: 75 - I
Digit Display: 5
Count range: 0-99999
Rated voltage: 220V
Transmission ratio: 1:1
Size: 16.2 x 7cm / 6.38 x 2.76in
Weight: 241g
Use method:
1. The shaft a circle, the counter number is one, the clockwise turn can increase the digit, the counter-clockwise turn decrease it.
2. Press the handle once and the display number is 0.
Package included:
1 x counter

Features:
This thermostat has a wide temperature controlling range from -58℉ to 194℉.
It can support both cooling and heating control.
Support delay start function, temperature upper and lower limit setting function, factory parameter lock function.
Support restore to factory setting function, support storing parameter setting after power failure.
Large LCD display for clear reading; support temperature calibration function.
Widely used for household refrigerators, water tanks, refrigerators, industrial water coolers, boilers, steam cages, industrial equipment and other temperature control systems.
Specifications:
Working Voltage: 110V±10%
Rated Current: 10A
Power Consumption: ≤3W
Temperature Control Range: -58~194℉
Temperature Control Precision: 1℉
Operating Temperature: -30~150°F
Temperature Sensor: NTC 77℉=10K B3435
Size: 75*34*85mm/3*1.3*3.3in
Weight: 208g(approx.)
Package Includes:
1 x Thermostat
1 x Sensor

Features:
Double sandblasting edge (5 mm block segment), more chip removal, cutting more , longer life.
Vibration-free designs greatly reduce operator fatigue, more productive than conventional abrasives.
For dry grinding and wet grinding.
Applicable models: polishing machine, angle grinder etc.
Cutting objects: stone grinding, asphalt grinding, ceramic grinding and so on.
High hardness and good toughness, durable in use.
Specifications:
Base material: 65Mn
Blade material: copper iron tin manganese nickel, particles
Outer Diameter(Optional):115mm(18 segments),125 mm(20 segments),180 mm( 28 segments)
Color: gold(115mm), silver(125 mm), yellow(180 mm)
Inner Diameter: 20mm/0.79 inch
Thickness: 5mm/0.2 inch
Inner row width: 7mm/0.28inch
Outer row width: 8mm/0.31inch
Weight: 365g(115mm), 430g(125 mm), 770g(180 mm)
Package Included:
1 x grinding disc

Features:
Made of high quality ABS material, it is durable, high temperature resistant and can be used for a long time.
This is a general single sensor temperature controller with strong anti-interference ability and stability.
It has the functions of refrigeration, defrosting, temperature alarm and so on. It is easy to use.
Compressor protection delay adjustable, suitable for refrigeration industry such as refrigeration storage, refrigeration truck.
Miniaturized design, small size, light weight, versatility, fast and reliable data reading.
Specification:Condition: 100% Brand New
Item Type: Temperature Controller
Material: ABS
Operating Environment Temperature: 0 ° C - 60 ° C
Power Supply Voltage: 220VAC ± 10% 50 / 60Hz
Power Consumption: Less Than 3W
Temperature Range: -50 ° C - 99 ° C
Temperature Control Range -40 ° C - 50 ° C
Storage Temperature: -30 ° C -75 ° C
Resolution: 1 ° C
Temperature Measurement Accuracy: ±1 °C (When the temperature is - 40℃- 50℃, ±2℃ at other)
Compressor Delay Time: 1 Minute
Relay Contact Capacity: 10A/220VAC
Relative Humidity: 20% -85% (No Condensation)
Weight: Approx. 226g / 8oz
Mounting Hole Size: Approx. 71x29mm / 2.8x1.1in
Size: Approx. 75x34.5x85mm / 3.0x1.4x3.3in
Package List:1 x Temperature Controller
1 x Instruction Manual
1 x Cable

Features:
1. Wide humidity measuring range and control range from 1% RH to 99% RH.
2. 3-bit LED digital tube displays the humidity clearly.
3. Built-in humidity calibration function.
4. Robust shell , waterproof and dustproof.
5. Accurate humidity control, stable performance.
Specification:
Model: SVWL-8040
Humidity measuring range: 1% -99% RH
Humidity control range: 1% -99% RH
Measuring error: 0.03
Power supply: AC 220V
Current: Maximum: 200mA
Data retention: Yes
Relay contact current: AC 10A/220V
Operating temperature: 0~50℃
Storage temperature: -10~60℃
Size: 84*80*38mm / 3.3*3.1*1.5in
Package weight: Approx. 212g/7.5oz
Package List:
1 * Humidity Controller
1 * Temperature Sensor Probe with Cable
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Feature:1. High quality chip, precision design makes PLC work more stable.
2. Quality assurance, longer service life, practical.
3. Professional technical support can give users a better experience.
4. Professional manufacturing, stable performance and high reliability.
5. Wide range of applications, it can use in a variety of industrial automation control applications.
Specification:
Condition: 100% brand new
Item type: Industrial Control Board
Material: bakelite plate
Color: As picture shown
Weight: Approx. 79g
Model: WS2N-10MR-S(C)
Input points: 6
Output points: 4
Output type: Relay
Output current: 5A
Load: DC24V AC220V
High-speed counting: 2 channels 3KHz
Pulse output: none
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Industrial Control Board
4 x Fixed colloidal particle

Feature:1. Adopt the latest PID algorithm, fast self-tuning, no overshoot, accurate temperature control
2. The welded shape is resistant to falling and stable
3. The Fahrenheit and Celsius can be set freely
4. state (SSR) and relay (RELAY) outputs are universal
5. Suitable for all kinds of where temperature measurement and control are required, such as bathrooms, greenhouse vegetables, hatcheries, etc.
Specification:
Item Type: Thermostat
Brand: BERM
Model: CHB402
Working Voltage: AC180-240 (V) 50Hz
Control Type: Temperature
Control Mode: Intelligent Temperature Control Regulator
Temperature Range: 0-400 (°C)
Input Signal: K-Type Thermocouple
Output: Relay/SSR
Accuracy Level: 0.5
Working Environment: 0-50 °C
Ambient Humidity: 35-85%
Hole Opening Size: Approx. 45 x 92mm / 1.8 x 3.6in
Installation Type: Embedded
Size: Approx. 48 x 96 x 82mm / 1.9 x 3.8 x 3.2in
Package List:1 x Thermostat
2 x Screw Fixing Bracket
1 x Chinese User Manual
1 x English User Manual

Features:
Can be applied in machine, small cutting , grinding machine, equipment and other mechanical equipment.
It drives up the super , almost no noise.
This motor features high 3500/7000rpm and large .
The stator windings of the motor are copper wire, CW/CCW control.
This permanent magnet DC motor is for DIY generator.
Need for external direct current governor, it can achieve adjustment function.
Specifications:
Model: -3420
Voltage(Optional): DC12V/24V
Power: 30W: 3500RPM(12V), 7000RPM(24V)
Voltage
No Load
No Load Current
Rated
Rated current
locked-rotor current
12V
3500RPM
2.42
2400
2.42
3.1
24V
7000RPM
2.76
5100
2.76
3.37
Package Included:
1 x Permanent Magnet DC Motor
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Feature:1. Small size, light weight PLC is easy to use in the practical life, which makes itself getting great popularity.
2. Support analog input, such programmable controller module can keep its high performance for a long time
3. Stable and reliable, streamline PLC industrial control board is entitled with pratical adoptability.
4. In relay output type, such programmable logic controller is with none pulse output, which support 5A output current.
5. After many inspections before leaving the factory, the PLC's quality is guaranteed, and you can use it with confidence.
Specification:
Item Type: Programmable logic controller
Model: WS2N-10MR-S
Input Points: 6
Output Points: 4
Output Type: Relay
Output Current: 5A
Load: 24VDC, 220VAC
High-Speed Counting: 2 / 3K
Pulse Output: None
Analog Input: Optional 2AD 0-10V

Package List:1 x Programmable Logic Controller

Features:
1. High accuracy, the temperature measurement error is 0.5℃, convenient to operate.
2. hole embedded installation type, easy to install and remove
3. The screen can provide clear readings for you which has stable performance.
4. The controller has wide temperature range which is 0-1300℃
5. Used in furnaces, ovens and machinery, etc.
Specification:
Condition: 100% Brand new
Model: REX-C400
Control Type: Temperature
Control Mode: Intelligent temperature control regulator
Measuring Object: Temperature
Temperature Range: 0-1300℃
Temperature Measurement Error: 0.5℃
Installation Type: hole embedded
Working Voltage: AC100-240V
Package List:
1 x Temperature Controller
2 x Install Terminals

Features:
The products are used in solar water heater, the temperature difference and temperature to control the output.
It is provided with two output control, temperature difference control two temperature zone.
When the temperature reaches the set value, it automatically runs the water pump circulation and makes the two temperature zone temperature equilibrium.
The other channel controls electric heating, when the solar heating failed to the set temperature, the electric heating system can automatically start and heat to the set temperature.
It will control heating system and automatically makes water temperature stay in temperature deference range.
Specifications:
Working Voltage: AC220V ±10% (50Hz/60Hz)
Output Load: 5A/220V/AC
Power Consumption: ≤3W
Heating Control Range: 2℃~99℃
Temp. Difference Start Control: 3℃~50℃
Resolution: 1℃
Precision: ±1℃
Input Signal: 2-channel sensor, 20KX1.5MX2
Size: 76*76*35mm/2.99*2.99*1.37in
Operating Temperature: -10℃~50℃
Operating Humidity: RH≤90%
Light Function Setting Range Default Unit
#1 temperature difference start stop pump temperature difference 1~50 5 ℃
#1, #2 stop pump temperature difference 1~temperature difference start-1 2 ℃
#2 temperature return difference 1~20 5 ℃
#3 high temperature correction -10~10 0 ℃
#4 low temperature correction -10~10 0 ℃
Package Includes:
1 x Temperature Controller
2 x Sensor Probes

Feature:1. Write the application in ladder diagram language to support for GX Developer 8.XX, GX-WORK2.
2. Support human-machine interface connection, text display (as long as the screen supports FX1N).
3. Support ladder programming, download, monitoring, batch soft original monitoring, memory clearing.
4. The programming port is the port for program download and communication with the display unit.
5. This PLC adopts an industrial-grade 32-bit MCU with strong anti-interference.
6. Password protection, as long as the password is 12345678 internal program is protected, to prevent your program from being stolen illegally, to protect your labor results. If the password is set to 12345678 and there is no program reading function, you can only download the program and the "Parameter" option cannot be ticked when downloading. Unable to unlock password.
7. Reasonable electromagnetic compatibility design, combined with software anti-interference measures, easily respond to the complex interference environment of the workshop.
8. As long as the screen supports FX1N and has 232 interface, it can communicate with this PLC.
9. Can be flexibly used in various industrial automatic control applications, such as metallurgy, chemical, plastics, textile, food, packaging, printing, building materials, woodworking, central air conditioning, environmental equipment and single process control equipment, etc. Industrial production lines, industrial control equipment for various machine tools.
10. Using advanced SMT (surface mount) process, all products have passed the 48-hour aging test.
Specification:
Condition: 100% Brand New
Item Type: PLC Board
Working Voltage: DC 22V--28V.
Relay Load Capacity: AC is not greater than 220V 5A, DC is not greater than 30V 5A
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x PLC Board

Description:This Industrial Control Board has high precision and . Widely used in various industrial automatic control situations, such as chemical, plastic, textile, food, packaging, printing, building materials, carpentry, central air conditioning, environmental protection equipment, etc, and in the single process control device such as the production machinery, industrial assembly line, various industrial control equipment of machine tools.
Feature:
With decelerating and accelerating soft start, prevent the loss and shake of the step.
With the origin regression, absolute positioning, relative positioning, and multiple high pulse output instruction and logic output input control.
High precision and . The ladder diagram computer programming is flexible and convenient and can be used with the man-machine interface.
Powerful super password. The super password can't be decrypted after entering the password, only clear the PLC memory to clear it.
Comprehensive and systematic anti-interference treatment. The power circuit is designed with multiple anti-interference ability and suitable for all kinds of bad electromagnetic interference working environment.
With a 32-bit high- CPU, supports for GX-Developer, for FXGPWIN. Can download/upload/debug/monitor/encryption link text or screen, clear PLC storage space, clear data unit storage space/clear bit unit storage space, monitoring.
Widely used in various industrial automatic control situations, such as chemical, plastic, textile, food, packaging, printing, building materials, carpentry, central air conditioning, environmental protection equipment, etc, and in the single process control device such as the production machinery, industrial assembly line, various industrial control equipment of machine tools.
Specification:Material: plastic
Power supply voltage: 24V DC
Input: X0-X13(12 point total)
Transistor output: Y0-Y7(8 point total, 1 channel/1A operation current)
Max. storage capacity: 8000 step programs
Weight: 205g
Size: Approx. 11*9.5*4cm / 4.3*3.7*1.5inch
Quantity: 1pc
Special soft components:M8000(Run the monitor contacts), M8001(Run the monitor anti-contact)
M8002(Initialize the pulse contact), M8003(Initialize pulse reverse contact)
M8004(Error indicating contacts)
M8011(10 ms clock pulse), M8012(100 ms clock pulse), M8013(1 second clock pulse), M8014(1 minute pulse)
Package Included:1 x Industrial Control Board with Case

Feature:1. Mechanical counter possess beautiful appearance and easy to use, which can be reset manually
2. Applicable to counting people at the airdrome, receiving goods at the terminal, factory statistics
3. Hand press four digit metal counter's working environment is 20‑60℃, the reading is clear
4. Stainless steel counter can anti‑rust, anti‑corrosion, wear‑resistant, and possess long service life
5. This useful 5 units tally counter is practical and possess stable use
Specification:
Item Type: Mechanical Counter
Material: Stainless steel
Counting Range: 0-9999
Scope of Application: Counting people at the airdrome/terminal counting/factory statistics
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Mechanical Counter

Feature:1. Mechanical counter possess beautiful appearance and easy to use, which can be reset manually
2. Applicable to counting people at the airdrome, receiving goods at the terminal, factory statistics
3. Hand press four digit metal counter's working environment is 20‑60℃, the reading is clear
4. Stainless steel counter can anti‑rust, anti‑corrosion, wear‑resistant, and possess long service life
5. This useful conjoined 6 units tally counter is practical and possess stable use
Specification:
Item Type: Mechanical Counter
Material: Stainless steel
Counting Range: 0-9999
Scope of Application: Counting people at the airdrome/terminal counting/factory statistics
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Mechanical Counter

Features:
1. 100% brand new and high quality.
2. Small body and stable performance.
3. This module can support connecting text screen and connecting screen
4. Work performance is stable and reliable
5. Wide range of applications, it can use in a variety of industrial automation control applications
Specification:
Condition: 100% Brand New
Model: FX3U-14MT-3V3I-2D-2O100K-M-K-I
Output Type: Transistor Output
Supply Voltage: 24V DC
Output Current: 1A
Analog Input: 6AD
Analog Output: 2DA
High Counting: 6 Channels 12K
Pulse Output: 2 Channels 100K
Floating Point: Support
Stepper Motor: Support
Memory Capacity: 8,000 Steps
RS485 Communication Port: Yes
Connect Text Screen: Support
Connect The Screen: Support
Programming Software: GX Developer Or GX Works2
Installation Method: Fixed Isolation Column Installation
Package List:
1 * Industrial Control Board

Features:
1. 100% brand new and high quality.
2. Small body and stable performance.
3. This module can support connecting text screen and connecting touch screen
4. Work performance is stable and reliable
5. Wide range of applications, it can use in a variety of industrial automation control applications
Specification:
Condition: 100% Brand New
Model: FX1N-24MR-K
Output Type: Relay Output
Number of Points: 14
Output Points: 10
Supply Voltage: 24V DC
Output Current: 5A
Analog Input: 3AD
Analog Output: 2DA
High Speed Counting: 2 Channels 3K
Pulse Output: No
Floating Point: No
Stepper Motor: No
Memory Capacity: 8,000 Steps
RS485 Communication Port: Yes
Connect Text Screen: Support
Connect The Touch Screen: Support
Programming Software: GX Developer Or GX Works2
Installation Method: Fixed Isolation Column Installation
Package List:
1 * Industrial Control Board

Features:
24VDC power supply, 16 Input,14 output, maximum memory capacity is 8,000 steps.
Can be directly used programming software GX Developer or GX Works2 for programming, downloading, debugging, monitoring.
The PLC adopts industrial grade anti-jamming strong 32 bit MCU, powerful, faster, more stable performance.
Support all kinds of text screen, touch screen, support special encryption support
With the shell, better protect the PLC Industrial Control Board
Specifications:
Model: FX1N-30MR
Working voltage: DC24 (V)
Output type: relay output
Input points: 16
Output points: 14
Memory capacity: 8000 steps
Link text screen: yes
Analog input: 3-way input RS485 communication port
Link touch screen: yes
Programming software: for GX Developer or for GX Works2
Size:13.5*12cm/5.31*4.72in
Weight: 305g
Package includes:
1 x PLC Industrial Control Board

Features:
1. 100% brand new and high quality.
2. Small body and stable performance.
3. This module can support connecting text screen and connecting touch screen
4. Work performance is stable and reliable
5. Wide range of applications, it can use in a variety of industrial automation control applications
Specification:
Condition: 100% Brand New
Model: FX3U-32MT-3V3I-8O100K-K-1
Output Type: Transistor Output
Number of Points: 16
Output Points: 16
Supply Voltage: 24V DC
Output Current: 1A
Analog Input: 6AD
Analog Output: 2DA
High Speed Counting: 6 Channels 12K
Pulse Output: 4 Channels 100K 4 Channels 12K
Floating Point: Support
Stepper Motor: Support
Memory Capacity: 8,000 Steps
RS485 Communication Port: With
Connect Text Screen: Support
Connect The Touch Screen: Support
Programming Software: GX Developer Or GX Works2
Installation Method: Fixed Isolation Column Installation
Size: Approx. 15 * 10 * 3cm / 5.9 * 3.9 * 1.2in
Package List:
1 * Industrial Control Board
Note:
The color of interface is random

Features:
This operate text panel can communicate with PLC.
Backlight LCD display screen, 20 control keys.
Dynamically display text.
Not support pulse output.
Support DC 24V or AC 220V load, maximum output current 5A.
Specification:
Model: OP320- A&1-10MR
Output Type: Relay Output
Input Points: 6 points
Output Points: 4 points
Supply Voltage: DC24V
Output Current: 5A
Analog Input: 1AD
Analog Output: None
High Speed Counting: 2 channel 3K
Pulse Output: None
Floating Point: Not supported
Stepper Motor: Support
Memory Capacity: 8,000 steps
Download Method: Direct download
RS485 Communication Port: None
: None
Text Programming Software: For XINJE OP320-8.0
PLC Programming Software: For GX Developer or GX Works
Package List:
1 x Display Panel
1 x Cable
1 x Terminal
4 Set of Metal Accessories

Feature:1. Applicable to self-starting controller to start the unit, reduce black smoke and facilitate start-up.
2. External anti-interference is strong, can reduce the interference to the unit controller and maintain stable operation of the unit.
3. Actuator short-circuit protection, can extend service life and protect your safety.
4. The shell of the module is made of aluminum, and the surface is treated with spray plastic, which is firm and wear-resistant.
5. The of the module is sealed with epoxy resin, moisture-proof, anti-vibration, anti-oxidation, high reliability.
Specification:
Conditon: 100% Brand New
Item Type: Generator Controller
Material: Aluminium Resin
Color: As Pictures Shown
Size: Approx. 14.8 x 11.5 x 5cm/5.8 x 4.5 x 2.0in
Application:
Suitable for engine PT (G) fuel system
Suitable for normally engines below 800KW
Model: 4914091
Working Voltage: 24±6V DC
Grounding Method: Negative ground (body)
Maximum Operating Current: 2.5A, 24V
Ambient Temperature: -15- 55℃
Relative Humidity: 0-95%
Vibration: 25 HZ 2 mm
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Generator Controller

Description:
Product Description
Describtion : Temperature range :-50-110 ℃
Dimensions: 48 * 40mm
Temperature control mode: ON / OFF
ResolutionWhen temperature is 0.1℃, the resolution is -9.999.9, other temperature segment is 1℃
Control accuracy: 0.1 ℃
Hysteresis accuracy: 0.1℃
Refresh rate: 0.5S
High temperature protection 0-110℃
Supply voltage: DC 12V
Static current: ≤ 35MA, attract current ≤ 65MA
Output voltage: DC 12V
Output power: 20A relay
Measurement input: NTC (10K 0.5% ) Waterproof Sensor
Environmental requirements: -10 60 ℃ Humidity 20% -85%
How to use:Connect the power supply and the load, you can supply to the controller,
Is displayed as a measured temperature,
Press the SET button, the display flashes the temperature,
Press - to set the desired temperature,
After setting press SET to confirm return,
The controller automatically performs the relay by setting off!
Lights, LED status descriptions:Indicator: Off The relay is switched off, Always indicate the relay is closed.
LED: Shows LL is the sensor open, showing ?HH is out of range, the thermostat will be forced to close the relay, the display --- as high temperature protection.
Preview:

Description:Description:Features:100% Brand new and high quality
Small and compact design, LCD screen display
The circle round is adjustable, and it can be fixed on your finger for easy to operate
Mechanically jumps by every press, quick reaction. Reset button help to zero clearing
It is universally used as a counter in the public place such as in the dock, the bus station, also in daily use for counting the number
Automatic closing functions, click and restore interface, and the number is changeless
Sculpt: ring
Counts Range:00000-99999
5 digit LCD screen display
Counter Speed: depend on human\'s reaction
Color: Random
Packing Content:
1 x Digital Hand Tally Counter
skuL0192623
Preview:

Description:Description:Features:100% Brand new and high quality
Small and compact design, LCD screen display
The circle round is adjustable, and it can be fixed on your finger for easy to operate
Mechanically jumps by every press, quick reaction. Reset button help to zero clearing
It is universally used as a counter in the public place such as in the dock, the bus station, also in daily use for counting the number
Automatic closing functions, click and restore interface, and the number is changeless
Sculpt: ring
Counts Range:00000-99999
5 digit LCD screen display
Counter Speed: depend on human\'s reaction
Color: Random
Packing Content:
1 x Digital Hand Tally Counter
skuL0192623
Preview:

Description:
Product Description
Describtion : Temperature range :-50-110 ℃
Dimensions: 48 * 40mm
Temperature control mode: ON / OFF
ResolutionWhen temperature is 0.1℃, the resolution is -9.999.9, other temperature segment is 1℃
Control accuracy: 0.1 ℃
Hysteresis accuracy: 0.1℃
Refresh rate: 0.5S
High temperature protection 0-110℃
Supply voltage: DC 12V
Static current: ≤ 35MA, attract current ≤ 65MA
Output voltage: DC 12V
Output power: 20A relay
Measurement input: NTC (10K 0.5% ) Waterproof Sensor
Environmental requirements: -10 60 ℃ Humidity 20% -85%
How to use:Connect the power supply and the load, you can supply to the controller,
Is displayed as a measured temperature,
Press the SET button, the display flashes the temperature,
Press - to set the desired temperature,
After setting press SET to confirm return,
The controller automatically performs the relay by setting off!
Lights, LED status descriptions:Indicator: Off The relay is switched off, Always indicate the relay is closed.
LED: Shows LL is the sensor open, showing ?HH is out of range, the thermostat will be forced to close the relay, the display --- as high temperature protection.
Preview:

Description:
1PC Portable 4 Digit Hand Held Number Click Golf Counter Tally Recorder
100% brand new and high quality.
Device Type: Hand Held Tally 4-Digit Number Clicker Counter
Counts Range: 0000 to 9999
Material:Stainless Steel
Product packaging size: 4cm x 5cm x 5cm
Color:Silver
4 Digit Number Tally Counter: Counts tally up to 9999 in increments of one.
No batteries required: This 4 digit number counter is no batteries required, which can count 0,000 to 9,999.
Easily reset: With a reset knob on the counter, it is easily reset by turning the knob.
Finger grip: The finger ring holder provides a extra grip for the counter, also it could be easy to carry with this hoop.
Compact Design: The counter is of small size, which fits comfortably in hand.
Wide Application: Ideal for a restaurant bars and occasions where numbers of visitors are restricted. Also fit for market research, stadium, playing court, casino and other similar situation.
The chrome plated smooth surface to resist to rust for comfortable to use, will not easy to leave any mark. A Giant Metal Finger Ring for conveniently hanging, which you can stick a thumb or finger into.
Package Includes
1 x Hand Held Tally 4-Digit Number Clicker Counter.