Tesztmérők és detektorok

Features:1. Applicable to USB5V powered devices such as mobile power, mobile phones, and tablets.
2. Load capacity up to Z-axis large output 3A. Support two mobile phones charging simultaneously.
3. It is functional affordable and practical.
4. Built to strict quality control standards, improved for more durability.
5. Fine workmanship, wear-resistance and corrosion-resistance.
Specifications:Input: 6V-40V
Output: 5V/3A (MAX)
Efficiency: 92% (MAX)
Switch frequency: 150KHZ
Working temperature: -40℃- 85℃
Size: Approx. 7*2*2cm/2.76*0.79*0.79inch
Package List:1 * Voltage Regulator Module

Led Voltmeter Mini Voltmeter Durable for 0.025% Resolution Long Service Life
Features:
1. Made of high quality material, durable and long service life.
2. This accuracy voltmeter has a "core" of 0.025% resolution to make sure sufficient margin, it has high accuracy
3. No need to supply power separately, use the power supply under test directly
4. Low startup voltage, blue shows a minimum of 3.0V
5. It has reverse connection protecting function and will not burn when connected.
Specification:
Condition: 100% Brand New
Measuring Range: DC3.0-30.0V
Power Supply Range: No Need to Supply Power Separately, Use the Power Supply Under Test Directly
Allowable Error: 0.1%
Input Impedance > 100K Ohms
Operating Current: < 18mA
Rate: About 300ms Once
Display Mode: Three 0.36'' LED Digital Tube
Lead Length: Approx. 15cm / 5.9in
Size: Approx. 23 * 15 * 10mm / 0.9 * 0.6 * 0.4in(length x width x thickness) (Without Mounting Ears); With Mounting Ears Length: 33mm
Mounting Hole Spacing: 28mm, Aperture: 2.8mm
Working Temperature: -10℃- 65℃
Package List:
5 * Digital Display Voltage Gauges

Features:
100% Brand new and high quality
Small, exquisite workmanship, long service life.
Clear display, easy to use.
High accuracy, and stable working performance
LED Display meter has wide measurement range of 20-75Hz
Specification:
Model: ST16HZ
Measurement range :20-75 (Hz)
Accuracy :±2%
Input signal amplitude :80-500 (V)
Applicable: circuit frequency measurement
Color: red, white, blue, green,yellow(Optional)
Weight: Approx.19g~21g/0.7oz~0.7oz
Package list:
1 x LED Hz Indicator

Features:
100% Brand new and high quality
Small, exquisite workmanship, long service life.
Clear display, easy to use.
High accuracy, and stable working performance
LED Display meter has Wide measurement range of 60-500V
Specification:
Model:ST16V
Measurement range :60-500 (V)
Input voltage :60-500 (V)
Output voltage :0 (V)
Ambient temperature: 0 to 50 (℃)
Color: red,white.blue,green,yellow(Optional)
Size:5*2*2cm/2*0.8*0.8in
Weight: Approx.22g/0.7oz
Package list:
1 x LED Display Voltmeter

Features:
Adopting high quality material, sturdy and durable in use.
Compact size, exquisite workmanship, long service life.
Digital display for easy and clear reading.
LED display meter has wide measurement range of 0-100A.
High accuracy, and stable working performance.
Specification:Material: Plastic
Weight: 43g/1.5oz
Measurement Range: 0-100 (A)
Accuracy: / -2%
Power Supply Voltage: 65-500 (V)
Color: Red, Green, Yellow (Optional)
Size: 55*30*30mm/2.2*1.2*1.2inch
Package List:1 * Digital Ammeter

Features:
This AC voltage meter is small in size, compact design.
It can measure and show voltage, the measuring range is 70-380V AC.
The voltage meter uses 0.36inch 3-digit LED display, clear to read.
There are 2 wires, easy to connect; can test directly and no need of power supply.
Widely used for AC 220V mains electricity test, voltage monitoring of 220v generator and inverter, and other AC circuit voltage test.
Specification:
Metering Range: 70-380V AC
Test Accuracy: ±3
Teat Speed Rate: ≥200ms/time
Error: 1%
Size: 4.5*3cm/1.8*1.2in
Weight: Approx.20g/0.7oz
Package list:1 * Voltage Meter
Electric Shock Warning:
Please ask a professional electrician to install this product, in order to avoid electric shock.

Features:
This is a digital voltage & current tester signal indicator.
High brightness LED display for easy reading.
The indicator can only be used to measure AC electricity.
Small size, simple structure, easy to install and use.
It can be used as signal indication, warning signal, accident signal and other signals in the electrical lines of machine tool, ship, textile, printing and mining machinery.
Specification:
Voltage Measuring Range: 60-500V
Current Measuring Range: 0-100A
Measuring Accuracy: /- 2%
Ambient Temperature: 0-50℃
Weight: Approx. 50g
Package List:
1 x Indicator

Feature:
1. Simple appearance, small and exquisite, stylish and beautiful.
2. Numerical control display, easy reading, large measuring range, high precise.
3. It can change the unit temperature arbitrarily.
4. Designed as a thermometer and hygrometer. Lightweight, easy to carry.
5. Suitable for lizard, gecko, snake, frog and other small animals.
Specification:
Condition: 100% Brand New
Item Type: Reptiles Thermometer Hygrometer
Material: ABS
Color: As Pictures Shown
Battery Model: Button Cell
Battery Capacity: 300
Weight: Approx. 21g
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1x Reptiles Thermometer Hygrometer

Features:
LED Voltmeter, which shows the current battery voltage.
Can be detected at any time under voltage conditions to avoid accidents.
LED ammeter, can be connected to any electrical equipment above.
Concerned about the use of the electric current situation at any time.
Antillama ABS retardant high temperature materials respectful with the environment.
High-end Meter, safe and durable, longer life.
Specifications:Condition: Brand New
Material: ABS
Input voltage: 12-24 (V)
Output voltage: 5 (V)
Output current : 2100 (mA)
Working temperature: 45 (°C)
Package List:1 * Dual Display Meter
3 * Blue Terminal

1/4in BSPT Thread Hydraulic Pressure Gauge Water Oil Air Gas Pressure Meter
Features:
This pressure gauge is a great pressure measuring tool with stable performance.
5cm dial plate, pressure scale of psi between 0 and 100 measurement.
Clear number markings for convenient and easy readings.
Metal outer case, well protect the inner accessories.
With mini size, it is convenient to carry.
Widely used for water, oil, air and many other non-corrosive substance.
Specifications:
Material: Metal
Measurement: 0~100PSI
Dial Plate Diameter: 5cm/1.9in
Connection: 1/4 BSPT Thread
Package Includes:
1 x Pressure Gauge

Feature:1. 1/4 inch pipe diameter, suitable for most application scenarios.
2. Made of plastic material, lightweight and durable in use.
3. Solenoid type valve control, sensitive switching, stable and reliable.
4. Compact structure, easy to install and use.
5. replacement for the old or broken one.
Specification:
Item Type: Solenoid Valve
Voltage: DC24V
Pipe Diameter: 1/4 inch
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Solenoid Valve

Feature:1. ABS plastic transparent panel for easy reading and clear at a glance.
2. High measurement accuracy, less than 4% accuracy, more accurate and reliable.
3. The shell is made of ABS plastic, which is resistant to scratching and anti-aging.
4. Mainly used for flow measurement and monitoring of various liquids.
5. Tube type liquid flow meter, it is more convenient and intuitive to read the value.
Specification:
Condition: 100% Brand New
Item Type: Liquid Flowmeter
Model: LZS-25 (D)
Material: ABS Plastic
Interface Type: Plastic Flat Interface (inner diameter 32mm / 1.3in)
Applicable Medium: Liquid
Accuracy: 4%
Measuring Range: 60-600L/H
Working Pressure: ≤0.6Mpa
Working Temperature: 0-60 ° C
Float Type: PTFE
Product Size: Approx. 235 x 58 x 58mm / 9.3 x 2.3 x 2.3in
.w-e-text table td, .w-e-text table th{border: .5pt solid #000;};.w-e-text table{border: 1px solid #000 !important;}.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Liquid Flowmeter

Features:1. Two-Wire LED volt meter panel, able to measure the voltage range is DC 2.4-30V.
2. 0.36 inch digital LED display, reading is more clear and convenient.
3. Dust-free workshop production, using imported original chip.
4. Low power consumption, high stability, high accuracy.
5. The appearance adopts international standard size, more convenient to install.
Specification:Condition: 100% Brand New
Item Type: DC Voltmeter
Working Voltage: DC 2.4-30V
Measuring Range: DC 2.4-30V
Installation Opening: Approx. 23 * 14.5mm / 0.9 * 0.6in
Minimum Operating Voltage: 2.4V
Maximum Working Voltage: 30V
Working Temperature: -10 ° C ~ 65 ° C
Working Humidity: 10~80% (No Condensation)
Working Pressure: 80~106KPa
Dimensions: Approx. 33 * 15 * 10mm / 1.3 * 0.6 * 0.4in
Voltmeter Digital Tube Color: 5 * Yellow
Package List:5 * DC Voltmeter
Note:1. Please allow slight error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Safe Low Power Consumption Voltmeter DC Voltmeter For Measure Voltage Industry
Features:1. Three-Wire LED volt meter panel, able to measure the voltage range is DC 0-100V.
2. 0.36 inch digital LED display, reading is more clear and convenient.
3. Reverse connect protection function, more safe and reliable to use.
4. Low power consumption, high stability, high accuracy.
5. The appearance adopts international standard size, more convenient to install.
Specification:Condition: 100% Brand New
Item Type: LED Volt Meter
Working Voltage: DC 4-30V
Measuring Range: DC 0-100V
Working Current: <20mA
Minimum Operating Voltage: 4V
Maximum Working Voltage: 30V
Working Temperature: -10 ° C ~ 65 ° C
Working Humidity: 10~80% (No Condensation)
Working Pressure: 80~106KPa
Voltmeter Digital Tube Color: 3 * Red, 1 * Blue, 1 * Green
Package List:5 * LED Volt Meter
Note:1. Please allow slight error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Overview:This thermometer hygrometer plays a significant role in your home and office. It can help you monitor the temperature and humidity indoor with accurate measurement, allowing you to be aware of the ambient and to take care of yourself and your family.
Features:
Large LCD display provides enhanced visibility and at-a-glance readings.
Convertible temperature unit between °C/°F.
With the backstand design, convenient to hold and reading.
The thermometer hygrometer can record the highest and lowest temperature and humidity in the past.
Made of quality ABS, sturdy, lightweight and resistant to high and low temperature, durable for long time use.
Specification:Material: ABS
Color: Black
Temperature Range: 0~50℃ (0~122℉)
Humidity Range: 10% RH~99% RH
Temperature Accuracy: 0.1℃
Humidity Accuracy: 1%
LCD Display Size: 70 x 30mm / 2.8 x 1.2inch
Battery: 1 x AG10 (NOT included)
Product size: Approx. 8.8 x 4.8 x 1.1cm / 3.5 x 1.9 x 0.4inch
Weight: Approx. 50g/1.8oz
Package List:
1 x Thermometer Hygrometer
Note:
Only a thermometer, no other stuff included.

Features:
1. 100% brand new and high quality.
2. Made of high quality chip, stable performance.
3. The external shell can prevent it from damage
4. It has the reverse connection protection function
5. Two wire design, can directly test the battery
Specification:
Condition: 100% Brand New
2-Wire Working Voltage: 4.0-30V
Working Current: <30mA
2-Wire Detection Voltage: 4.0-30V
Display Mode: LCD Blue Screen Backlight
Measurement Accuracy: 3%
Working Temperature: 10 - 65℃
Measurement Rate: ≥200ms/Time
Overrange Display
Automatic Conversion Of Decimal Point: Within 10V Detection Voltage, Two Digits After Decimal Point Display, Detection Voltage Above 10V, One Digit After Decimal Point Display
Weight: Approx. 35g / 1.2oz
Package List:
1 * Digital Display Voltmeter
1 * Cable

Features:
There are 5 colors of light to show the measuring voltages: Blue, Yellow, White, Red, Green.
Detecting voltage range DC 2.4V-30V, the decimal point is automatically shifted.
Easy to use: Just connect two wires of this mini voltmeter to the negative and positive pole of measured voltage.
High , reverse connection protection.
International standard size, convenient installation.
Specification:
Working voltage: DC 2.4-30V
Measuring range: DC 2.4-30V
Installation opening: 23*14.5mm / 0.9*0.6in
Working temperature: -10~ 65℃
Working humidity: 10~80% RH (no condensation)
Working pressure: 80~106KPa
Dimensions: 33*15*10mm / 1.3*0.6*0.4in
Package list:
5 x Mini Voltmeter

Features:
The ideal analog panel meter for measuring the current used in an experiment or home.
Analog panel with low consumption is easy to read.
Made of high-quality plastic, strong and durable.
Small size, lightweight and easy to carry.
Accuracy of 2.5, measuring 0 to 5A current. / Accuracy of 2.5, measuring 0 to 10A current. / Accuracy of 2.5, measuring 0 to 30A current. / Accuracy of 2.5, measuring 0 to 15V voltage. / Accuracy of 2.5, measuring 0 to 30V voltage.
Specification:Type: Current Voltmeter
Model: 85C1
Material: Plastic
Instrument Type: Analog
Accuracy: 2.5
Test current range: DC 0-5A
/ Test current range: DC 0-10A
/ Test current range: DC 0-30A
/ Test voltage range: DC 0-15V
/ Test current range: DC 0-30V
Weight: Approx. 66g
Size: Approx. 6.2 * 4.5 * 5.7cm / 2.4 * 1.8 * 2.2in
Application: For experiments
Package list:1 * Current Voltmeter
1 * Accessory Kit
Note:Please allow slight error due to manual measurement. Thanks for your kind understanding.

Feature:1. Equipped with 5 wires, 2 power supplies, and 3 measurements, convenient to connect to the wiring of car, battery car, and motorcycles.
2. The test voltage of this meter is 0‑100V, and additional power supply is required. The power supply voltage range: DC4.5‑30V, it will not burn if reverse connection.
3. Used to monitor the battery voltage and grasp the battery voltage status in time. It can also be used for other product voltage and current measurement purposes.
4. This dual‑color dual‑meter is small in size and can display voltage and current on the same screen at the same time.
5. 10 Ampere voltage ammeter tester with 3‑digit blue red dual LED display.
Specification:
Condition: 100% brand new
Item Type: Current and voltage meter
Material: plastic
Color: As pictures shown
Size: Approx.4.3x2.9x1.8cm/1.7x1.1x0.7in
Power Supply Voltage: 4.5-30V
Working Current: <20mA
Test Voltage: 0-100V
Test Current Range: 0-10A
Minimum Resolution: 0.1V
Measuring Rate: ≥500mS/time
Measurement Accuracy: 1% (±0.01)
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Current and Voltage Meter
1 Supply Connection Line
1 x Measurement Connection Line

Feature:1. Small size, easy to carry and store, easy to use and with good performance
2. Can be used to measure jewelry, leather, metal sheet, paper, film, wire and similar materials
3. Using high-quality materials, strong and durable, has a long service life
4. Great workmanship and practical, perfect meet your demands
5. Strict quality control and quality assurance, high safety factor, can be used with peace of mind
Specification:
Item Type: Thickness Gauge.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Specification: 1 x Thickness Gauge
Material: Plastic, steel
Uses: Leather thickness measurement
Package List:1 x Thickness Gauge

12-48V Digital Battery Capacity Voltage Tester Meter Indicator Lithium Li-ion
Features:Reverse connection protection, and there is only two wires, easy to connect and use.
LCD screen with blue/green/white backlit.
Equipped with a PVC film, the surface is waterproof.
Built with buckle, free of screw installation.
Power-on shows the percentage of power, visually showing the remaining battery.
Specification:Type: Battery Capacity Voltage Meter
Material: HTN / PCB
Weight: Approx. 13.7g
Size: Approx. 4.3 * 2.3 * 1.4cm
Standard voltage: 12-48V
Scope of application: battery or devices with battery
Working temperature: -10 -50℃
Charging time: depends on matching battery
Package list:1 * Battery Capacity Voltage Meter
1 * Cable
Note:1. Please allow slight error due to manual measurement.
2. Different monitor colors may be different. Thanks for your kind understanding.

Features:
1. Non-contact voltage detection and non-metallic pen body make sure that you won't be shocked by the electricity.
2. Equipped with flashlight, convenient for maintenance at darkness.
3. Testing voltage ranges from 12V to 1000V, which is suitable for household appliances.
4. Made of high quality engineering plastic, pen body is hard, wear-resistance and insulated.
5. Built-in intelligent chips achieves sound light alarm, auto sensitivity, auto shutdown, NCV null and live line test and other functions.
Specification:
Brand: PEAKMETER
Model: PM8908C
Auto Power Off: Yes
Low battery indication: Yes
Live/Null Wire Identification: Yes
NCV Sensitivity: Automatically selecting 3 kinds of sensitivity (High, Medium, Low)
Voltage Sensitivity: AC 12V-1000V
Frequency: 50-500Hz
Alarm Mode: Sound light Flash
Light Color: White
Operating Temperature: 0-50 ℃ (2-122℉)
Storage Temperature: -20-60℃ (-4-140℉)
Humidity: < 85% RH
Battery: 2pcs 1.5V AA Batteries (NOT included)
Size: 16*2*2cm/6.30*0.79*0.79in
Weight: Approx. 64g
Package Includes:
1 x Voltage Tester (Battery is NOT included)
1 x User Manual

Descriptions:
It can be used to measure air, water, oil, gas and other things that are not corrosive to brass.2.3" face with 1/4" NPT thread connection, side mounted, its measurement range is 0~10 bar.This pressure gauge is a great pressure measuring tool with stable performance.
Features:
It can be used to measure air, water, oil, gas and other things that are not corrosive to brass.
This pressure gauge with stable performance, has scale for bar measurement
2.3" face with 1/4" NPT thread connection, side mounted, its measurement range is 0~10 bar
Clear number markings for easy readings
Metal outer case, well protect the inner accessories, mini size, convenient to carry.
This is a steel gauge with steel bezel.
Specification:Material: metal
Measurement range: 0~10 bar
Thread specification: NPT
Connection: 1/4" NPT Thread
Size:as the picture
Weight:104g
Package Included:
1 x Pressure Gauge

Description:
This thickness gauge has a large digital LCD display for convenient reading of data. The main body is made from high quality engineering plastics, light weight and durable. It has a similar shape as micrometer, and the function is also similar to micrometer, mainly used for measuring outer diameter of tube or rod and measuring thickness.
Features:
The thickness gauge body is made from high quality engineering plastics, light weight and durable.
Thickness gauge is designed with a large digital LCD display for convenient reading of data.
Supports reset function at any position, and imperial system switch, manual power on/off and automatic power off.
Suitable for measuring situations which require especially insulation and magnetic or scratch prevention.
Can be used to measure thickness of paper, PU leather, metal sheet, jewelry, battery, and magnetic materials, etc.
Specifications:
Measurement Range: 0-12mm / 0.5"
Resolution: 0.01mm, 0.0005"
Accuracy: ±0.1mm, 0.005"
Operating Temperature: 0~40℃
Storage Temperature: -20~70℃
Relative Humidity: ≤80%
Power: LR44/SR44 1.5V button battery(not included)
Size: 110 x 60 x 20mm / 4.33 x 2.36 x 0.78"
Screen Size: 33 x 10mm / 1.3 x 0.39"
Instruction:
1, Press the on/off button to power on.
2, Check whether it displays 0.00, if not, reset it by pressing the zero button.
3, Press the pressing trigger and put the workpiece in then release the trigger. Read the measuring result, and measure a few more times then calculate the average of results to get a more accurate one.
Package Includes:
1 x Thickness Gauge

Features:
Small size, light weight, good reliability and easy installation.
35mm standard DIN-rail mounting in accordance with standard DIN EN50022.
Quadrupole width (modulus 12.5mm), in line with GB/ t7121-1993 standard.
Standard configuration 5 1(99999.1KWh) digital display.
The standard configuration pulse output is passive (polar) and the remote pulse output can be selected as passive (non-polar). It is easy to contact with various AMR systems and conforms to the standards IEC 62053-31 and DIN43864.
Double color LED indicates the power status (green) and the energy pulse signal (red).
One-way measurement of single-phase two - wire active energy consumption . This has nothing to do with the direction of the load current. with IEC 62053-21.
Extend the terminal cover to protect the use of the security.
Specification:Item Type: Din Rail Energy Meter
Model: DDM75SC
Voltage Specification: 220V/230V 50/60Hz
Frequency: 50/60Hz
Current Specifications: 20(80)A
Insulation performance: AC voltage 4KV, 1 minute, 1.2/50us waveform impulse voltage 6KV
Display mode: LCD display
Installation method: rail installation
Weight: 248 g / 8.7 oz(approx.)
Package List:1 * Energy Meter

12-84V Digital Battery Capacity Monitor Indicator Voltage Tester Meter Voltmeter
GY-6GD
Features:1. Single button design, simple and efficient setting, only takes a few seconds to set up.
2. Equipped with a switch, the display can be turned off, and no power will be consumed.
3. Accurately display the percentage of battery capacity and voltage, intuitively grasp the battery capacity state.
4. Backlight flashing alarm when the power value is less than 20% .
5. Adopting high specification craft, sturdy and durable to use.
Specification:Condition: 100% Brand New
Item Type: Electricity Display
Material: PCB/HTN
Optional Light Color: Blue, Green, White
Display Range: 8-100V
Applicable Voltage: 12-84V
Compatible Battery: Lead-acid battery, lithium battery, lithium iron battery (can be set up by yourself)
Display: LCD Display
Size: Approx. 6 x 3.3 x 1.4cm / 2.4 x 1.3 x 0.6inch
Weight: Approx. 20g
Package List:1 x Display
1 x Connecting Line
GY-6GS
Features:1. Simple and efficient setting, only takes a few seconds to set up.
2. Equipped with a switch, the display can be turned off, and no power will be consumed.
3. Accurately display the percentage of battery capacity and voltage, intuitively grasp the battery capacity state.
4. PVC film surface, waterproof and can be used with confidence.
5. Adopting high specification craft, sturdy and durable to use.
Specification:Condition: 100% Brand New
Item Type: Electricity Display
Material: PCB/HTN
Optional Light Color: Blue, Green, White
Display Range: 8-100V
Compatible Battery: Lead-acid battery, lithium battery, lithium iron battery (can be set up by yourself)
Applicable Voltage: 12-84V
Operating Temperature: -10~50℃
Size: Approx. 6.1x 3.3 x 1.3cm / 2.4 x 1.3 x 0.5inch
Weight: Approx. 20g
Package List:1 x Display
1 x Connecting Line

12-84V Digital Battery Capacity Monitor Indicator Voltage Tester Meter Voltmeter
GY-6GD
Features:1. Single button design, simple and efficient setting, only takes a few seconds to set up.
2. Equipped with a switch, the display can be turned off, and no power will be consumed.
3. Accurately display the percentage of battery capacity and voltage, intuitively grasp the battery capacity state.
4. Backlight flashing alarm when the power value is less than 20% .
5. Adopting high specification craft, sturdy and durable to use.
Specification:Condition: 100% Brand New
Item Type: Electricity Display
Material: PCB/HTN
Optional Light Color: Blue, Green, White
Display Range: 8-100V
Applicable Voltage: 12-84V
Compatible Battery: Lead-acid battery, lithium battery, lithium iron battery (can be set up by yourself)
Display: LCD Display
Size: Approx. 6 x 3.3 x 1.4cm / 2.4 x 1.3 x 0.6inch
Weight: Approx. 20g
Package List:1 x Display
1 x Connecting Line
GY-6GS
Features:1. Simple and efficient setting, only takes a few seconds to set up.
2. Equipped with a switch, the display can be turned off, and no power will be consumed.
3. Accurately display the percentage of battery capacity and voltage, intuitively grasp the battery capacity state.
4. PVC film surface, waterproof and can be used with confidence.
5. Adopting high specification craft, sturdy and durable to use.
Specification:Condition: 100% Brand New
Item Type: Electricity Display
Material: PCB/HTN
Optional Light Color: Blue, Green, White
Display Range: 8-100V
Compatible Battery: Lead-acid battery, lithium battery, lithium iron battery (can be set up by yourself)
Applicable Voltage: 12-84V
Operating Temperature: -10~50℃
Size: Approx. 6.1x 3.3 x 1.3cm / 2.4 x 1.3 x 0.5inch
Weight: Approx. 20g
Package List:1 x Display
1 x Connecting Line

12-84V Digital Battery Capacity Monitor Indicator Voltage Tester Meter Voltmeter
GY-6GD
Features:1. Single button design, simple and efficient setting, only takes a few seconds to set up.
2. Equipped with a switch, the display can be turned off, and no power will be consumed.
3. Accurately display the percentage of battery capacity and voltage, intuitively grasp the battery capacity state.
4. Backlight flashing alarm when the power value is less than 20% .
5. Adopting high specification craft, sturdy and durable to use.
Specification:Condition: 100% Brand New
Item Type: Electricity Display
Material: PCB/HTN
Optional Light Color: Blue, Green, White
Display Range: 8-100V
Applicable Voltage: 12-84V
Compatible Battery: Lead-acid battery, lithium battery, lithium iron battery (can be set up by yourself)
Display: LCD Display
Size: Approx. 6 x 3.3 x 1.4cm / 2.4 x 1.3 x 0.6inch
Weight: Approx. 20g
Package List:1 x Display
1 x Connecting Line
GY-6GS
Features:1. Simple and efficient setting, only takes a few seconds to set up.
2. Equipped with a switch, the display can be turned off, and no power will be consumed.
3. Accurately display the percentage of battery capacity and voltage, intuitively grasp the battery capacity state.
4. PVC film surface, waterproof and can be used with confidence.
5. Adopting high specification craft, sturdy and durable to use.
Specification:Condition: 100% Brand New
Item Type: Electricity Display
Material: PCB/HTN
Optional Light Color: Blue, Green, White
Display Range: 8-100V
Compatible Battery: Lead-acid battery, lithium battery, lithium iron battery (can be set up by yourself)
Applicable Voltage: 12-84V
Operating Temperature: -10~50℃
Size: Approx. 6.1x 3.3 x 1.3cm / 2.4 x 1.3 x 0.5inch
Weight: Approx. 20g
Package List:1 x Display
1 x Connecting Line

Feature:1. Completely solves the problem that the traditional single board is not compatible with for win7/win8 systems, and the stability is higher.
2. There are 2 larger pins for convenient to use of wire.
3. This development board can replace 16u2, the cost is halved, and the cost performance is higher
4. Small size, easy to carry and store, convenient to use and with good performance
5. Strict quality control and quality assurance, high safety factor, can be used with peace of mind
Specification:
Item Type: Development Board
Material: Pcb
Size: Circuit Board: Approx. 67 x 53mm / 2.6 x 2.1in
Pin Header Length: Approx. 100mm / 3.9in
Support ISP download function.
Input Voltage: No external power supply is required when connected to the computer USB, external power supply 5V-9V DC voltage input
Output Voltage: 5V DC voltage output and 3.3V DC voltage output.
Using for Atmel Atmega328 microprocessor controller
Package List:
1 x Development Board
1 x Pin Header

Description:This Plastic Tube Type Water Flow Meter is specifically designed to provide high level of accuracy in measuring the amount of water supplied through a pipeline. It is not easy to break, durable to use.
Features:Simple structure, easy operation.
Low weight, unbreakable and long life span.
The shell of the flow meter is made of plastic, corrosion resistant.
Easy to install and convenient to use.
Widely used in water industrial field.
Specification:Material: Plastic
Type: Plastic Tube
Model: LZS-15
Measure Level: 100-1000L/H
Accuracy: 4%
Operating Temperate: 0~60°C
Operating Pressure: no more than 0.6MPa
Fit for: DN15(1/2") Tube
Weight: 142g
Package List:1 x Water Flow Meter
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Safe Voltmeter Low Power Consumption DC Voltmeter Industry For Measure Voltage
Features:1. Three-Wire LED volt meter panel, able to measure the voltage range is DC 0-100V.
2. 0.36 inch digital LED display, reading is more clear and convenient.
3. Reverse connect protection function, more safe and reliable to use.
4. Low power consumption, high stability, high accuracy.
5. The appearance adopts international standard size, more convenient to install.
Specification:Condition: 100% Brand New
Item Type: LED Volt Meter
Working Voltage: DC 4-30V
Measuring Range: DC 0-100V
Working Current: <20mA
Minimum Operating Voltage: 4V
Maximum Working Voltage: 30V
Working Temperature: -10 ° C ~ 65 ° C
Working Humidity: 10~80% (No Condensation)
Working Pressure: 80~106KPa
Voltmeter Digital Tube Color: Blue
Package List:5 * LED Volt Meter
Note:1. Please allow slight error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

12V Lead Acid Battery Fuel Gauge Indicator Meter 12 Volt SLA/AGM/GEL Battery
Features:
Long life button with comfortable feeling.
PVC screen protector makes the battery indicator waterproof.
The shell of the battery has the buckle to clock, so you don't have to install screws.
Power is universal for use according to their own specifications.
Small size, light weight, easy assembly and disassembly, easy to carry and use.
Specifications:Model: GY-6D
Working Range: 6-63V
Operating Current: <5MA
Display Mode: LCD
Color: Shown as picture
Surface Waterproofing: Yes
Material: Plastic
Weight: Approx. 20G
Display Screen Size: 61.3*33.3*13.5MM/ 2.41 x 1.31 x 0.53Inch
Hole Size: 58.5*28.5MM/2.30 X 1.12Inch
Installation: Self-locking With A Buckle
Package included:1 x Battery Indicator
Instructions:The Front key can display and percentage of battery.
Press the right button to display and voltage of battery voltage
Press once again the power of the button will be turned off. (Power will not consume after shutdown)
3 levels of the indicator can be switched manually.

Descriptions:This water flow meter is made of plastic, used for testing the instantaneous flow liquid. Its measure flow range is 25-250L/H. The flow meter float is made of plastic shell, so it has good resistance to acid and alkali corrosion resistance. It mainly used in chemical, petroleum, light industry, medicine, chemical fertilizer, chemical fiber, food, environmental protection and scientific research departments.
Features:
Made of plastic, used for testing the instantaneous flow liquid.
Measure flow range is 25-250L/H.
The flow meter float is made of plastic shell, so it has good resistance to acid and alkali corrosion resistance.
This flow meter features stable performance, clear scale line, and its measuring accuracy is 4% .
It mainly used in chemical, petroleum, light industry, medicine, chemical fertilizer, chemical fiber, food, environmental protection and scientific research departments.
Specifications:Material: Plastic
Type: Plastic Tube
Model: LZS-15
Measure level: 25-250L/H
Accuracy: 4%
Operating temperate: 0~60°C
Operating pressure: no more than 0.6MPa
Fit for: DN15(1/2") Tube
Size: Approx. 4.4 x 20cm/ 1.73 x 7.87inch
Weight: 133g
Package Included:1 x Water Flow Meter

Measurement Tool 50-750um Range Wet Film Comb With Cloth Bag Rectangular
Feature:1. Comes with a cloth bag, lightweight and compact, easy to carry the gauge.
2. High measuring accuracy, practical and convenient, easy to operate and use.
3. Measuring tool for measuring the thickness of various paint wet film coating.
4. The wet film comb is made of stainless steel material, rust proof and durable.
5. 50-750um thickness gauge, wide scope of application and stable performance.
Specification:
Condition: 100% Brand New
Item Type: Rectangular Comb Gauge
Material: Stainless Steel
SHG-750 Double-Sided Type: (50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 350, 400, 450, 500, 550, 600, 650, 700, 750)ÎĽm
Scope of Application: Coating thickness gauge, measuring tool for measuring the thickness of various paint wet film coatings
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Comb Gauge
1 x Cloth Bag

Feature:1. Improve students' ability to brainstorm and hands-on ability.
2. Used to measure the voltage in a DC circuit.
3. Suitable for general secondary schools,technical secondary schools when conducting experiments or grouping experiments for students.
4. The level accuracy of the dial meter is 2.5.
5. You can manually choose the measuring range by changing the connection terminal.
Specification:
Item Type:Current Meter
Accuracy Level:2.5
Measuring Range:0~0.6A 0~3A
Size:133 x 97 x 100mm / 5.24 x 3.82 x 3.94in
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Current Meter
1 x Users Manual
Note:
1. Check whether the pointer is aligned with the 0 line before use. If there is a deviation, turn the 0 button to align the pointer with the 0 line.
2. The meter should not be struck or shaken severely.
3. The meter should be kept clean and free from corrosive gases!

Specifications:Material: Environment Friendly Nylon
Working current: 10-20A
Working voltage: 12-24V
Size: 48.6x26mm
Color: Black;Red Light
Measurement error: <1%
Description:Grind arenaceous flame retardant material
High-precision current and voltage LED display
Over-loaded protection
Full-time attention for car battery
Excessively high and low battery voltage will influence the service life of car battery.
Packaged included:1x Double-layer Display Red LED Digital Voltmeter Ammeter
3x Terminals with Cable

Features:
35mm standard DIN- rail installation, complying with standard DIN EN50022
Bipolar width, complying with standard DIN43880
Standard configuration 5 1 digits display (99999.1kWh)LCD
May select function(display voltage, current, power, frequency, power factor)
Single direction measurement single phase two wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard GB/T17245.321-2008
Embedded terminal cover, nice, safe to protect electricity
Specifications:
Model: XTM35SC
Accuracy: Class 1
Voltage: 220V
Current: 5(80)A
Insulation performance: AC voltage 4kv for 1 minute,1.2/50us waveform impulse voltage 6kv
Size: 8.3 x 6.5cm / 3.27 x 2.56in
Weight: 136g
Package included:
1 x DIN-Rail Electric Meter
1 x Manual
4 x Accessories
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Feature:1. This digital meter displays the voltage of the car battery.
2. The LED has high brightness, clear and intuitive.
3. High sensitivity, which has stable and professional performance.
4. Easy to install, no complicated tools required, convenient for using.
5. Built to meet standard specification, strictly follow factory quality control.
Specification:
Condition: 100% Brand New
Item Type: Car Voltmeter
Material: ABS
Color: As picture shown
Application: Suitable for DC 12V or 24V Car
Measuring Range: DC 8V-30v /- 1.2%
When the engine is running (not driving), LED display:Between 13.5 - 14.5 (12V car)
Between 26.0 - 28.0 (24V car)
When the engine turned off and nothing turned on, the LED display:Greater than 12.0 (12V CAR) or 24.0 (24V Car)
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:4 x Car Voltmeter

Features:
1. Display: 3.5 digital LCD with a maximum reading of 1999, auto polarity display
2. Measure method: double integral A/D switch implement
3. Designed in handheld small size and light weight, its portable to use
4. Over‑load indication: "1" is displayed
5. operating Environment: 0~40 Celsius degree, at<80% RH
Specification:Display: 3.5 digital LCD with a MAX reading of 1999, Auto polarity display
Measure method: double integral A/D switch implement
Sampling speed: 2 times per second
Over‑load indication: "1" is displayed
operating Environment: 0~40 Celsius degree, at<80% RH
Storage Environment: ‑10~50 Celsius degree, at<85% RH
Power: 2 size AAA batteries (Not include)
Low battery indication: support
DC voltage: 600V ± (0.8% 3 dgt)
AC voltage: 600V ± (1.2% 5 dgt)
AC current: 20‑200‑600A ± (2% 5dgt)
Resistance: 2K‑200K‑2MΩ ± (1.0% 3dgt)
Package includes:1 X Digital Clamp meter
1 X Set of test leads .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:Brand new and high quality.
Digital multimeter with plastic holster.
High sensitivity AC/DC voltage and AC current measurement.
Fit for schools, factories, families, and amateur wireless lovers.
Mini and compact design, more convenient to carry and use.
Data hold and LCD display, easy and clear to read.
On-off warning and diode testing functions.
Low battery indication.
Function of overload protection.
Specifications:DC Voltage: 600V, Accuracy: ±1.0% .
AC Voltage: 450V, Accuracy: ±1.2% .
AC Current: 20 - 400A, Accuracy: ±2.0% .
Resistance: 200KΩ, Accuracy: ±1.0% .
Power: 2 x 1.5V AAA(Not Included).
Normal Operation Temperature: 18 Centigrade - 28Centigrade (64°F - 82°F).
Usable Condition Temperature: 0Centigrade - 50Centigrade (32°F - 122°F).
Storage Temperature: -20Centigrade - 60Centigrade (-30°F - 140°F).
Relative Humidity: Max 80% .
Display: LCD.
Dimensions:15*6.7*2.7cm-5.9*2.6*1.1inch.
Color: Red, Yellow, Blue. Please leave notes about it when making the payment. Thank you.
Model: MT87.
Max Display: 1999.
Jaw Opening Largest Size: 21.3 mm.
Package includes:1 x Multimeter .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

1 Pz 230V Presa Elettrica Misuratore Di Potenza Monitor Per Risparmio Energetico
Features:
With LCD display screen, convenient for real-time monitoring of power.
Simply connect the power consuming device to the outlet, and it will evaluate the actual efficiency of the appliance.
Test the quality of the home power supply: it can monitor the voltage (volts) and line frequency, test whether the socket is working properly, and evaluate the power quality provided by the utility company.
The LCD can show all meter readings: volts, current, watts, frequency, power and VA.
Through the electricity statistics socket, you can monitor the energy consumers in your home, and reduce the electricity bill at the same time.
Specification:Material: ABS Plastic
Color: white
Operation Voltage: 230v~50hz
Operation Current: Maximum 16A /3680w
Voltage Working Range:200v~ 276v
Voltage Accuracy: /-2%
Power Display Range: 0.1w ~3680w
Power Accuracy: /-2%
Total KWh Display: 0kwh ~ 9.999kwh
Packing List:1 * Electricity Metering Socket
1 * User Manual

230V Digital Power Meter Energy Monitor Volt Watt Voltage Socket Analyzer Outlet
Features:
With LCD display screen, convenient for real-time monitoring of power.
Simply connect the power consuming device to the outlet, and it will evaluate the actual efficiency of the appliance.
Test the quality of the home power supply: it can monitor the voltage (volts) and line frequency, test whether the socket is working properly, and evaluate the power quality provided by the utility company.
The LCD can show all meter readings: volts, watts, and power.
Through the electricity statistics socket, you can monitor the energy consumers in your home, and reduce the electricity bill at the same time.
Specification:Material: ABS Plastic
Color: white
Operation Voltage: 230v~50hz
Operation Current: Maximum 16A /3680w
Voltage Working Range:200v~ 276v
Voltage Accuracy: /-2%
Power Display Range: 0.1w ~3680w
Power Accuracy: /-2%
Total KWh Display: 0kwh ~ 9.999kwh
Packing List:1 * Electricity Metering Socket
1 * User Manual
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

AC/DC Non-Contact LCD Electric Voltage Test Pen 12-1000V Detector Tester Pencil
Feature:1. Non-contact and pen shaped design, convenient to operate and carry.
2. With LED flashlight,convenient to use at night or dark environment.
3. Ideal for testing power cables, circuit breakers, wall sockets and so on. A perfect tool kit for home and electric industry uses.
4. With wide testing range, this non-contact voltage tester voltage within 12-1000V AC, all electric appliances in your family can be tested by it.
5. The voltage pen tester detects voltage in a non-contact way, so do not worry about there could be any possibility of being shocked by the electricity.
6. A professional tester, it is perfectly suitable also for DIY'ers, hobbyists and home owners, it helps you make the first and the most important safety check.
Specification:
Condition: 100% Brand New
Item Type: AC Voltage Detector
Material: ABS
Color: As shown in the picture
Weight: Approx.50g/1.8oz
Operating Voltage: AC voltage: 12-1000V
Application Environment:Working Temperature: 0~40°C
Storage Temperature: -10~50°C
Humidity: ≤95%
Altitude: ≤2000m
Security Compliance:CAT.lll 1000V
CAT. 600V : CE
Battery: 2x1.5V AAA battery (Not included)
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x AC Voltage Detector
1 x Instruction Manual
Note:
1. Please allow 1-2cm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Feature:1. This water flow sensor is made of brass, owning stable operation, high temperature resistance, and low water pressure start
2. Wide range of applications, can be used in water heaters, credit card machines, water vending machines, flow measurement equipment
3. The water flow sensor is light in weight, flexible in outline, small in size and easy to install. The interface size is G1/2in inner and outer wire
4. This water flow sensor is waterproof, heat resistance, pressure resistance and cold resistance, owning good operation performance
5. The flowmeter is light and handy, easy to install. The connection is firm, the sealing performance is good and the problem of water leakage is avoided.
Specification:
Item Type: Water Flow Sensor
Material: Brass
Model: YF-B20
Interface Size: G1/2in female male thread
Flow Range: 0.3-10L/min
Working Voltage: DC3-24V
Pulse Characteristics: F=11 x Q
Withstand Voltage Range: ≧1.5MPA
Interface Mode: One end has 4 points of male thread that is approx. 20mm / 0.8in, G1/2, one end has 4 points of female thread
Wiring Mode: Red positive signal, black negative, yellow signal output
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Water Flow Sensor

Features:
1. Adopt microelectronics and digital processing technology to measure electric energy, accurate and reliable.
2. Internal integrated circuit is manufactured with precision SMT technology, with good electromagnetic interference resistance and stable performance.
3. This energy meter can measure positive active energy in electric energy measurement, which is clearly displayed by LCD backlight screen.
4. It circularly displays voltage, current, power and energy KWh.
5. Small size, light weight, 35mm DIN rail mounting.
6. It has low power consumption, high precision, high overload, electricity anti-stealing.
Specification:
Model: DDS528L-230V
Rated voltage: 230V AC
Rated current: 5-32A
Load capacity: 0.05Ib - Imax (direct access type) or 0.02Ib - Imax (access via transformer)
Data display: LCD display
Power indication: Green light
Electric energy pulse indication: Red light (When there is a sampling signal, it lights for about 80ms)
Mounting method: 35mm DIN rail
Working environment: -25℃~55℃, ≤95% RH
Size: 78.5*36.5mm / 3.09*1.44in
Package weight: Approx. 133g/4.7oz
Package list:
1 * Energy Meter
1 * Buckle
4 *
Note:
1. Due to the difference between monitors and light effects, the pictures may not reflect the actual color of the item.
2. Please allow slight error due to manual measurement. Thanks for your understanding.

Feature:1. Can test AC & DC current, AC & DC voltage, battery, resistance, etc.
2. It also has the characteristics of low voltage indicator, overload protection and data-hold.
3. With portable design, anti-drop, anti-skid, and anti-static design, suitable for single hand operating with a comfortable feeling.
4. Large screen with backlight, cool and modernized design, simple to operate and easy to read even in the dark.
5. An excellent tool for instruments and laboratories, factories, radio enthusiasts and families.
6. Fuselage back with bracket design, adjust the angle needed for measurement at any time, more convenient for observation.
Specification:
Condition: 100% Brand New
Item Type: Multimeter
Material: Plastic
Optional Color: Blue White, Yellow Black, Grey White, Blue Yellow, Yellow Blue
DC Voltage: 200mV--2-20-200-600V ±0.5%
AC Voltage: 200V-600V ±1.0%
DC Current: 200u-2m-20m-200m-10A ±1.8%
Resistance: 200-2k-20k-200k--2MΩ ±1.0%
Maximum Display Value: 1999
Diode: Support
Triode: Support
Continuity Measurement: Support
Data Hold: Support
Background Light: Support
Power Supply: 6F22 9V Battery (Not Included)
Size: Approx. 135 x 67 x 33mm / 5.3 x 2.6 x 1.3in
Weight: Approx. 140g / 5oz
Package List:1 x Multimeter 1 x Instruction 2 x Test Leads

Features:
Large screen LCD displays voltage, current, active power, energy at the same time.
The DC voltmeter is designed with power alarm threshold, overload alarm function.
It has memory function can store measure data when power off.
Short press the key to turn on or off the backlight.
Built in current shunt , convenient for using and saving your time.
Specifications:
Brand: PEACEFAIR
Model: PZEM-031
Working voltage: 6.5-100V DC
Voltage test range: 6.5-100V DC
Rated power: 20A / 2000W
Measurement Accuracy: 1.0
Weight: Approx. 78g
Test Range Display Format
Power 0-2kW ＜1kW, 0.0-999.9W
≥1kW, 1000-2000W
Energy 0-9999kWh ＜10kWh, 0-9999Wh
≥10kWh, 10-9999kWh
Voltage 6.5-100V 6.50-99.99V
Current 0-20A 0.00-20.00A
Note:This module is only suitable for 6.5~100V DC power.
This module is suitable for indoor, not outdoor.
Applied load cannot exceed the rated voltage and current.
The wiring order cannot be wrong.
Built in current shunt , don't need to connect outside.
Packing Included:1 x Voltage Current Meter

Feature:1. It's waterproof and dust-proof, it can protect your multimeter from scratches and dirt.
2. The protective case bag is made of high quality PU material, environmental protection, sturdy and durable.
3. Compact and lightweight easy for you to put it in your toolbox, backpack or carry-on with your every day working.
4. Large capacity for holding multimeter and other small accessories, easy to clean and maintainance.
5. This is a perfect clamp meter, fit for Fluke F302, F303, F305, F312, F317, F319, F362, F365, F342, F321, F322, F323, F324, F32 5LH41A, T5 series F373, F374, R75 temperature and humidity meter F971, etc.
Specification:
Condition: 100% Brand New
Item Type: Clamp Meter Bag
Material: PU
Color: Black Yellow
Size: Approx. 26.5 x 11.5 x 2.5cm / 10.4 x 4.5 x 1in
Weight: Approx. 83g / 2.9oz
Fitment: Fit for Fluke F302, F303, F305, F312, F317, F319, F362 F365, F342, F321, F322, F323, F324, F325, LH41A,T5 series F373, F374, R75 temperature and humidity meter F971, etc
Fit for Testo 770 series
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Clamp Meter Bag

Features:
1.This is a non-contact handheld digital photo tachometer with stable performance.
2.Wide measuring range from 2.5RPM to 99999 RPM and high resolution of 0.1RPM or 1RPM.
3.High sampling frequency, clear LCD display, high measuring accuracy.
4.This tachometer can automatically record the max value, min value and last value.
5.With auto range, low battery indication and other functions.
6.Wide used in the field of motor, wheels, lathe, electrical fan, paper making, plastic industry, washing machines, car making, etc.
Specification:
Model: -2234C
Material: ABS Plastic
Display: 5-digit 18mm(0.7") LCD Display
Measuring Range: 2.5RPM - 99,999RPM
Resolution: 0.1RPM at 2.5-999.9RPM, 1RPM at 1000-99,999RPM
Accuracy: ±(0.05% 1 digit)
Measuring Distance: 50-500mm / 2-20in
Time Base: 6MHz Quartz Oscillator
Range Selection: Auto range
Sampling Time: 0.8s(over 60RPM)
Power Supply: 1 * 9V 6F22 Battery(NOT included)
Power Consumption: Approx. 30mA
Working Temperature: 0℃ ~ 50℃(32℉ ~ 122℉)
Item Size: 130*68*26mm / 5.1*2.7*1.0in
Package Weight: Approx. 150g / 5.3oz
Package list:
1 * Digital Tachometer
1 * Blue Bag
3 * Reflective Tape
1 * User Manual(English)

Feature:1. Wide voltage input, the range is AC110-230V
2. With 4-digit digital tube display to provide clear readings
3. High measurement accuracy, up to 0.1%
4. With Hall sensor, more sensitive to measure and transmit
5. Clear lines, more convenient for connection and removal
Specification:
Item Type: Digital Speed Meter
Working Power: AC 110V-230V, above 40mA
Display Mode: 0.56 red LED, four-digit reading
Measuring Range: 10-9999
Measurement Accuracy: ± 0.1% , reading ± 1 digit
Display Refresh Rate: >3 times / second
Overrange Display: Display "----"
Size: Approx. 79 x 43 x 26mm / 3.1 x 1.7 x 1in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Meter
1 x Hall Effect Sensor(with magnet)