Egyéb teszt, mérés és ellenőrzés

Features:
1. This is a force measuring instrument, with maximum measuring range of 10N.
2. You can also use it to measure the mass of objects within 1kg.
3. Using high quality spring, this force meter can still maintain its measuring precision after many times of use.
4. Standard structure design, easy to operate.
5. Used as basic teaching instrument in physics mechanical experiments.
Specification:
Maximum range: 10N
Material: Plastic, Iron
Color: Green shell
Length: 15.5cm/6.1in
Package weight: Approx. 48g/1.7oz
Package list:
1 * Spring Dynamometer
Note:
1. Due to the difference between monitors and light effects, the pictures may not reflect the actual color of the item.
2. Please allow slight error due to manual measurement. Thanks for your understanding.

Feature:1. RP-L resistive pressure sensitive sensor is a flexible thin film sensor whose resistance value decreases as the pressure on the sensing area increases.
2. The single-sensing area sensor is equivalent to a two-port variable resistor whose resistance is controlled by pressure.
3. RP-L flexible film pressure sensitive sensor is composed of polyester film with excellent comprehensive mechanical properties, highly conductive material and -scale sensing material.
4. The bottom layer is a flexible film and a conductive layer conforming thereto, and the layer is a flexible film and a pressure-sensitive material compounded thereon. The two are bonded by double-sided adhesive and isolate the upper and lower sensing areas
5. When the sensing area is under pressure, the wires that are disconnected from each other at the bottom will be conducted through the pressure-sensitive layer, and the resistance output value of the port will change with the pressure change.
Specification:
Item Type: Resistive Film Pressure Sensor
Thickness: 0.4mm
Style: Film, flexible
Triggering Force: Less than 20g, trigger when the default resistance is less than 200KΩ
Pressure Range: 20g-5kg
Mode of Pressure Action: Static or dynamic (frequency within 10Hz)
Resistance When not Triggered: Greater than 10MΩ
Activation Time: Less than 0.01mS
Operating Temperature: -40℃~ 85℃
Durability: Over times
Response Time: <10ms
Features:Static/dynamic pressure sensing
Quick response
Long durability and life
RP-L resistive pressure-sensitive sensors can be used for applications including:Bed-out-of-bed monitoring
Sleep monitoring
Smart running shoes: record the and frequency of compression
Smart switch: Set the strength recognition to prevent misoperation
Counter: record the number of times of pressure
Pressure level monitoring: Detecting the pressure level of the human body on medical equipment
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Sensor

When repairing the LCD and notebook, if you only see a little shadow or high voltage protection when you the screen, it is difficult to judge whether the or the high voltage board is faulty! With this set of tools, it is easy to determine the fault! The kit comes with a connection cable so that it can be easily tested whether the LCD port is large or small!
Features:1. This kit is directly connected to the monitor's 12V/1A-4A power supply, which can simultaneously illuminate two lamps below 15 inches.
2. Whether it is testing the LCD screen or the tube without solder leads, it is very convenient.
3. It also can be used for lighting billboard or advertising signs by CCFL lamps.
4. The kit comes with a patch cord so that it can be easily tested whether the LCD port is large or small!
5. It is really a good tool for testing LCD lamps.
Specification:Material: ABS
Color: White
Input voltage: 12V
Suitable for: CCFL, LED backlight display
Size: 65 * 25 * 20 mm / 2.6 * 1.0 * 0.8in
Weight: Approx. 43g
Package List:1 * Tester
2 * Connection Cable

Features:
100% Brand new and high quality
The product is a socket detector, used for socket connection status test, RCD leakage switch test, GFCI test (US gauge)
Easy to operate, quickly check the safety of the socket connection
Exquisite divisional design, test result display lights, double layer insulation protection, reference for test results, electrical leak-proof test button
Applied in electrical maintenance testing,office electricity safety testing,home improvement electrical safety testing ,test wall sockets
Specifications:
Brand: Bside
Plug Standard: EU Plug,US Plug (Optional)
Rated voltage Un= 220-250V (AC) 50-60HZ (EU Plug)
Rated voltage Un= 90-120V (AC) 50-60HZ (US Plug)
Rated residual operating current: 5mA
Earth resistance: Earth resistance meet the standard
Size: 58*53*53mm/2.28*2.09*2.09in
Weight: 61g
Package Includes:1 x Bside AST01ER Outlet Tester
1 x English User Manual
Notes:Socket tester display "Correct" means the pole is connected correctly, but does not means resistance value is passed designation standard. Only passing "Creeping Switch Test", it can finally obtain the earth resistance value to test whether the Protection System works well or not. To ensure your safety, don't make the insert out of shape to affect the test result

Features:
100% brand new and high quality.
It is made of high transparent glass that will not hamper your view while using.
It is made of high quality glass,very durable.
The mirror is not easy to break if fall to the ground.
It is suitable for children to learn the optical knowledge.
Specification:Style(Optional):Convex Mirror:Diameter with Holder:100mm/3.94in;Mirror Diameter:10cm/3.94in
Concave Mirror:Diameter with Holder:100mm/3.94in;Mirror Diameter:10cm/3.94in
Triple Prism:Edge Length:80mm/3.15in
Component:Mirror/Frame/Pedestal
Package List:1*Convex Mirror/Concave Mirror/Triple Prism
Note:
Adults' guidance is needed for young children.

Features:
Memory contains 4 wood groups with calibrations for approximately 50 species of wood.
Strong and durable, suitable for variety of special occasions.
Auto power off conserves battery energy.
Large LCD display of wood moisture value.
Built-in battery check and low battery icon display.
Specifications:Screen: LCD
Resolution: 0.1%
Accuracy: ±0.5%
Electrode pin length: 10mm / 0.4inch
Electrode pins: Integrated
Auto Power OFF: After approx.15 minutes
Power Supply: 1 x 9V 6F22 battery (Battery NOT included)
Instrument Enclosures: ABS plastic
Operating Temperature: 0 to 40 ℃ (32 to 104 ℉)
Operating Humidity: 85% Relative Humidity Maximum
Length: Approx. 14.5cm / 5.71inch
Width: Approx. 6.5cm / 2.56inch
Weight: 134g
Package Included:1 x Wood Moisture Meter (Battery NOT included)
1 x User Guide
Note:
Only wood moisture meter and user guide, no other stuff.

Features:1. This tester can test all sizes of CCFL luminaires, ranging from 3 to 55 inches.
2. Ergonomic high voltage point measurement quality standard.
3. The ground wire has a plug connected to the tester and an clip at its other end.
4. You can test all CCFL tubes and take care not to create high voltage arcs that can damage the tubes.
5. Very easy to test LCD screen, CCFL advertising signs, etc.
6. The red button switch is safe. Connect the 12V DC adapter (not included) to the tester and the LED will be green indicating that the power is . The of the tester will have a high voltage, when the LED turns red (indicating alertness), press the button, then you can test the light. The LED will turn green (sleep) by pressing for 3 seconds.
7. Scope of application: bare , with bracket, LED light bar, LCD backlight detection, LCD TV backlight detection, LCD maintenance display channel detection.
8. Applicable industry: appliance repair personnel, LCD maintenance personnel.
Specification:Input: DC 12V 2A
Suitable for: 3-55 inch TV
Material: Plastic Metal
Color: Blue
Size: 18.5 * 3.8 * 2.8cm / 7.3 * 1.5 * 1.1in
Weight: approx. 94g
Package list:1 * Tester
1 * Null Line
1 * Connection Cable
Note:1. Do not connect the to the tester for long time. Always make sure contact the probe tip to the ending of the to be tested.
2. Be careful not to be hit y high voltage.

This phone screen magnifier is capable of magnifying cellphone screen by 3 times to give a clearer and more vivid , and a dynamic feeling. Optical magnification technology helps protect your eyes. Furthermore, it is a phone . Can be folded for easy and convenient carrying.
Features:
3x Zooming - To enlarge phone screen by 3 times to offer a clearer and more vivid , and a dynamic feeling.
Optical Magnification - Adopting optical magnification technology to protect your eyes and prevent you from fatigue after long time seeing.
A Phone - The cellphone magnifier is capable of holding your phone.
Portable - Folding enables it to be carried to everywhere.
Wide Compatibility - Suitable for indoors, camping, travelling, etc.
Specification:Product type: Phone Screen Magnifier
Material: Silica gel, acrylic, ABS
Magnification: 3x zooming
Magnification technology: Optical magnification
Screen size: 12in
Eyes protection: Support
Phone : Support
Portable: Support
Color( optional): Black, white
Package size: approx. 23 * 15 * 6 cm/ 9.1 * 5.9 * 2.4 in
Package weight: 400g/ 14.1oz
Package List:1 * Phone Screen Magnifier
1 * User Manual
1 * Cleaning Cloth

Features:
Ergonomic design make it more comfortable to use.
Integral injection molding, flexible to use, can fit more testing occasion.
High voltage, the maximum input voltage can be up to 2kV.
Come with marking circles in different colors help to identify different channels.
There is a adjustment tool that can adjust compensation capacitance to match oscilloscope.
Specifications:Model: P4100
Attenuation: 100X
Input Resistance: 100MΩ
Input Capacitance: 6pF(100X)
Compensation Range: 10pF~35pF
System Bandwidth:DC-100MHz(100X)
Input Voltage: <2KVDC AC Vp-p(100X)
Connector Type: BNC
Operating Temperature: -15°C~ 75°C
Humidity: ≤85% (RH)
Package Includes:
1 x Probe
2 x Caps
8 x Colored Circles
1 x Adjustment Tool
1 x Spring

Features:
Thermostat supplies single heating contact output or single cooling output contact
To get room temperature via sensor and compare with thermostat setting temperature, achieve close and open of output contact,switching temperature difference is 0.5℃ .
With large LCD screen display, easy to read even in the dark.
This digital thermostat features high sensitivity and high accuracy.
Generous appearance, and sample to operate.
Specifications:
Power: 2 * AA alkaline batteries (not included)
Display accuracy: 0.5℃ or 1°F
Probe sensor: NTC(10k)1%
Contact capacity: 5A
Working environment temperature: 0~50°C / 32~122°F
Temperature control range: 5 ~ 35 ° C / 41~95 ° F
Temperature display range: 0 ~ 40 ° C / 32~104 ° F
Output: Switch relay
Insulating condition: Normal environment
Running program: Set per 1 week as a cycle
Installation: Wall mounted or on battery seat
Size: 8.5 x 8.5 cm / 3.35 x 3.35in
Weight: 165g
Package included:
1 x Temperature Controller(battery Not included)
1 x Manual
2 x Screw

Description:This high-precision fiber optical meter supports 3 kinds of connectors and 7 wavelengths to make it suitable for various test environments. And the display of absolute power dBm and relative power db is able to meet your different needs. In addition, its high sensitivity with low errors ±0.5dB helps you get accurate values, which makes it so reliable and practical. The three AA batteries (not included) power supply gives you super long standby time up to 48 hours.
Features:High-precision Meter: The fiber optic cable tester adopts high sensitivity with low errors of ±0.5dB to ensure the accuracy of values.
Wide Measuring Range: This fiber optical power meter measures from -70dBm to 10dBm, which allows you to measure more optical devices conveniently.
Multiple Power Units: The tested power are shown with the forms of dB, dBm, mW, uW, nW. And there are 7 types to show wavelength.
Wide Wavelength Range: It supports 3 kinds of connectors and 7 wavelengths, including 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm to make it suitable for different test environments.
Absolute power and relative power: When wavelength is chosen, the screen will show the present value, including linear value of absolute light power and non-linear value. When the wavelength is set in the mode of absolute light power, both absolute power and relative power will show.
Long Standby Time: Three AA batteries (not included) power supply gives you super long standby time up to 48 hours, which makes it very reliable and practical.
Specifications:Product type: Fiber Optical Power Meter
Measuring scope: -70dBm - 10dBm
Error: ±0.5dB
Wavelength: 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm
Power display unit: dB, dBm, mW, uW, nW
Standby time: 48 hours
Display resolution: Linear indication: 0.1% ; Logarithmic indication: 0.01dBm
Optional connector: SF, FC, ST
Auto power-off time: 10 minutes
Power supply: 3 x AA batteries (not included)
Weight: 400g
Product size: approx. 190 * 100 * 48 mm/ 7.48 * 3.94 * 1.89 in
Working temperature: -10 - 60℃
Storage temperature: -25 - 70℃
Package List:1 * Optical Power Meter
1 * User Manual
1 * Warranty Card

Features:
1. Measuring data can be zeroed at any position.
2. 60/70/80/90 degree angle measurement template.
3. One-button metric/inch size conversion.
4. With a serial output to interface with a computer or printer to process data.
5. Legible LCD display, easy to read the measuring results.
Specification:
Material: Stainless steel plastic
Specification: 0-20mm
Resolution: 0.01mm/0.0005"
Allowable Error: ±0.03mm
Battery Type: LG44/AG13 1.5V (NOT included)
Package Weight: 153g (approx.)
Package List:
1 * Digital Welding Gauge
1 * Storage Box

Features:
compensation technology design, original imported pressure - sensitive components, stable and reliable
Mainly used in building automation, telecommunication machine room, paper making, storage and logistics, shopping mall, hotel, cinema, railway station, , theaters, agricultural greenhouses, hospitals, weather, cleaning workshops, etc
Small size, and easy to install
Pressure Transmitter has characteristic of protection, anti-interference
Suitable for wall hanging furnace, gas furnace, gas storage, etc all kinds of hydraulic, pneumatic pressure measurement
Specifications:
Capacity range: 0-3bar
Integrated accuracy: 0.1% FS
Power supply: 24VDC
Output signal: 4-20mA
Overload capacity: 25bar (damaged)
Temperature range of use: - 10 ℃ to 100 ℃
Pressure medium: non-corrosive liquid or air
Influence of temperature: typical value: 0.02% FS/C; Maximum value: 0.05% FS/C
Temperature drift sensitivity: typical value: 0.02% FS/C; Maximum value: 0.05% FS/C
Shell material: stainless steel (304)
Connection: DIN type
Explosive proof class: ExiaIICT6
Long-term stability: less than 0.2% FS/year
Protection class: IP68
Port thread: ZG 1/4
Length:12cm / 4.72in
Weight: 240g
Package included:
1 x Pressure Transmitter

Features:
This is a multi-function DC meter based on 2.4G wireless data transmission technology.
It can measure miscellaneous parameters such as voltage, current, power, charge and discharge capacity, watt-hour, time, and temperature.
It has over-current protection, under-voltage protection, and limited protection and other protection functions.
The instrument can automatically identify the direction of the current, and the battery capacity can be monitored in real time.
The instrument uses TFT LCD display, display information is comprehensive, user-friendly and better interaction.
Specification:
Model(Optional) VAT-1050 VAT-1100 VAT-1200 VAT-1300 VAT-4300
Voltage measurement range 0~100V 0~100V 0~100V 0~100V 0~400V
Voltage resolution 0.01V 0.01V 0.01V 0.01V 0.1V
Current measurement range 0~50A 0~100A 0~200A 0~300A 0~300A
Current resolution 0.01A 0.1A 0.1A 0.1A 0.1A
Relay External External External External External
Temperature measurement range -20~120 ℃
Capacity display range 0% ~100%
Power measurement range 0~200kW
Power resolution 0.001W
AH measurement range 0~2000kAH
Capacity resolution 0.001AH
Watt-hour measurement range 0~4000kWH
Watt-hour accuracy 0.001WH
Time measurement range 0 ~ 99 days
Time resolution 1 second
Communication channel range A ~ Z (26 channels)
Communication channel range 01~99
Voltage accuracy ± 2% 3 words
Current accuracy ± 5% 10 words
Sampling rate 5 times / second
Communication distance up to 10 meters
Measurement module power consumption About 0.4W
Display module power consumption 0.5W
NCP 0 ~ 300A (negative over-current protection setting)
OCP 0 ~ 300A (positive over-current protection setting)
OVP 0 ~ 100V (over-voltage protection setting)
LVP 0 ~ 100V (under-voltage protection setting)
protection delay time 0 ~ 10s
Weight
453g / 16oz
Package list:1 * Meter Display
1 * Meter Module
1 * Data Cable
1 * Temperature Sensor Probe
1 * 2P Cable

Features:
This is a multi-function DC meter based on 2.4G wireless data transmission technology.
It can measure miscellaneous parameters such as voltage, current, power, charge and discharge capacity, watt-hour, time, and temperature.
It has over-current protection, under-voltage protection, and limited protection and other protection functions.
The instrument can automatically identify the direction of the current, and the battery capacity can be monitored in real time.
The instrument uses TFT LCD display, display information is comprehensive, user-friendly and better interaction.
Specification:
Model(Optional) VAT-1050 VAT-1100 VAT-1200 VAT-1300 VAT-4300
Voltage measurement range 0~100V 0~100V 0~100V 0~100V 0~400V
Voltage resolution 0.01V 0.01V 0.01V 0.01V 0.1V
Current measurement range 0~50A 0~100A 0~200A 0~300A 0~300A
Current resolution 0.01A 0.1A 0.1A 0.1A 0.1A
Relay External External External External External
Temperature measurement range -20~120 ℃
Capacity display range 0% ~100%
Power measurement range 0~200kW
Power resolution 0.001W
AH measurement range 0~2000kAH
Capacity resolution 0.001AH
Watt-hour measurement range 0~4000kWH
Watt-hour accuracy 0.001WH
Time measurement range 0 ~ 99 days
Time resolution 1 second
Communication channel range A ~ Z (26 channels)
Communication channel range 01~99
Voltage accuracy ± 2% 3 words
Current accuracy ± 5% 10 words
Sampling rate 5 times / second
Communication distance up to 10 meters
Measurement module power consumption About 0.4W
Display module power consumption 0.5W
NCP 0 ~ 300A (negative over-current protection setting)
OCP 0 ~ 300A (positive over-current protection setting)
OVP 0 ~ 100V (over-voltage protection setting)
LVP 0 ~ 100V (under-voltage protection setting)
protection delay time 0 ~ 10s
Weight
453g / 16oz
Package list:1 * Meter Display
1 * Meter Module
1 * Data Cable
1 * Temperature Sensor Probe
1 * 2P Cable

Features:
This is a multi-function DC meter based on 2.4G wireless data transmission technology.
It can measure miscellaneous parameters such as voltage, current, power, charge and discharge capacity, watt-hour, time, and temperature.
It has over-current protection, under-voltage protection, and limited protection and other protection functions.
The instrument can automatically identify the direction of the current, and the battery capacity can be monitored in real time.
The instrument uses TFT LCD display, display information is comprehensive, user-friendly and better interaction.
Specification:
Model(Optional) VAT-1050 VAT-1100 VAT-1200 VAT-1300 VAT-4300
Voltage measurement range 0~100V 0~100V 0~100V 0~100V 0~400V
Voltage resolution 0.01V 0.01V 0.01V 0.01V 0.1V
Current measurement range 0~50A 0~100A 0~200A 0~300A 0~300A
Current resolution 0.01A 0.1A 0.1A 0.1A 0.1A
Relay External External External External External
Temperature measurement range -20~120 ℃
Capacity display range 0% ~100%
Power measurement range 0~200kW
Power resolution 0.001W
AH measurement range 0~2000kAH
Capacity resolution 0.001AH
Watt-hour measurement range 0~4000kWH
Watt-hour accuracy 0.001WH
Time measurement range 0 ~ 99 days
Time resolution 1 second
Communication channel range A ~ Z (26 channels)
Communication channel range 01~99
Voltage accuracy ± 2% 3 words
Current accuracy ± 5% 10 words
Sampling rate 5 times / second
Communication distance up to 10 meters
Measurement module power consumption About 0.4W
Display module power consumption 0.5W
NCP 0 ~ 300A (negative over-current protection setting)
OCP 0 ~ 300A (positive over-current protection setting)
OVP 0 ~ 100V (over-voltage protection setting)
LVP 0 ~ 100V (under-voltage protection setting)
protection delay time 0 ~ 10s
Weight
453g / 16oz
Package list:1 * Meter Display
1 * Meter Module
1 * Data Cable
1 * Temperature Sensor Probe
1 * 2P Cable

Features:
100% brand new and high quality.
This pressure transducer uses silicone sensor.
Light weight and small size, convenient to install and operate.
It can measure gauge pressure, absolute pressure and negative pressure.
Works for gas, liquid and steam which are not corrosive to stainless steel.
Specification:
Type: Silicone pressure transducer
Measuring Fluid: Gas, liquid and steam (which is non-corrosive to stainless steel)
Measuring Range: 0~1.6MPa
Accuracy: 0.2% , 0.5%
Output Signal: 4~20mA DC or 1~5VDC (normal 4~20mA DC)
Overload Capacity: <1.5 times of measuring range
Temperature Drift: 0.02% FS/℃
Power Supply: 12~36VDC (normal 24VDC）
Fluid Temperature: -40~150℃
Ambient Temperature: -30℃~80℃
Ambient Humidity: <85% RH
Load Resistance: ≤1000Ω
Weight: 283g / 10oz (approx.)
Package list:
1 * Pressure Transducer

Features:
This generator uses induction effect to produce static, when two electrophorus spin, the charged system, especially ball part on discharge fork equipped with insulated handle, will gather a lot different electric charge.
The conductive layer of conductive plate is coated with conductive material, coating is firm, durable and overcomes the shortcomings that aluminum foil is easy to fall off.
Improved static generating performance, it can generate static even in humid climate and rainy day.
It is used in the experiment of electrostatics to get a lot of charge and high voltage about tens of thousands of volts), in combination with other instruments for experiments about charge distribution on conductor surface, power line or electrostatic field, point discharge and discharge of vacuum tube.
Itself can also be used for a series of experiments, such as electrostatic induction, spark discharge, point discharge and capacitor (refer to the Leyden jar on generator) capacitance change and so on.
Specifications:
Model: 23008
Material: Metal
Size: 33.5*29*19.5cm/13.2*11.4*7.7in
Package Weight: 1.5kg(approx.)
Package Includes:
1 x Static Machine

AC 110V/220V KP182 High Auracy Single Channel Electronic DC Load Tester US/EU
Features:
Low , CV, the CW, four basic load patterns;
Low input or reverse connect protection and alarm;
Optimization of heat dissipation structure to achieve high power density and Digital control mode, higher auracy and good stability;
With over voltage, over current, power, over temperature protection.
Low voltage function of remote measurement;
Automatic testing function, with external I/O trigger signals, PASS, FAIL instructions;
Low 10 KHZ dynamic testing functions;
Low battery capacity test functions;
Low battery internal resistance testing capabilities;
Low over-current protection point/time testing capabilities;
Low fan PWM control
Low power supply switch 110 vac / 220 vac use;
Specification:
Refers to the standard type No.
KP182
Power supply input
voltage(Optional)
AC 110V/220VPlus or minus10% ,50Plus or minus2Hz
Plug type(Optional)
EU plug, US plug
Power consumption
< 20 W
The load input
Load voltage
DC 1 -150 V
Load current
0-20A
Load power
0-200W
Auracy of measurement
current
Plus or minus0.1% 5mA
voltage
Plus or minus0.1% 5mV
Control
current
Plus or minus0.1% 5mA
voltage
Plus or minus0.1% 5mV
Communication methods
Does not support the communication
To protect the
overpressure(OV)
Is greater than152 VClose the load
A temperature(OT)
85°
A power(OP)
Single channel210W
Power supply input fuse 0.5A
Using the environment temperature range
0~500C
Using the environment humidity range
10~90% RH
DC The input of casing pressure
Plus or minus500VDC
DC The input to the chassis insulation resistance
>20MΩ,500VDCwhen
AC The input to the chassis insulation resistance
>20MΩ,500VDCwhen
Overall dimensions
300*90*180mm/11.8*3.5*7.1in
Weight
Approx.3402g~4500g/120oz~158.7oz
Package list:
1 x KP182 DC electronic load
1 x plug cable
1 x remote compensation terminal
2 x negative test end
2 x test cable
1 x user manual

Description:Description
100% brand new, high quality
Color: silver case, black ink
Material: ABS
Type: Ballpoint pen
Role: ballpoint pen vernier caliper
Nib: 0.5mm
Size: pen length 15cm
Vernier caliper ballpoint pen for students to use.
0.5Mm creates a better writing experience for you, suitable for writing.
The handwriting is smooth, long lasting and restores the original style.
The pen is 15 cm long and easy to carry, and the pen is slippery and comfortable.
Suitable for: office, school, children's gifts.
Quality first, providing the best service. The customer is our friend.
Stylish design, 100% brand new, high quality!
Note:1. For photos, please allow slight color difference
2. Dimensions may vary due to manual measurements
Package Included:1pcs caliper ballpoint pen
Preview:

Features:
operating voltage: 48250V/4565Hz
Measure voltage (with LCD): 48250V/4565Hz
accuracy:± (2.0% 2)
operating temperature: 0°C40°C
operating Humidity: 20% 75% RH
Storage temperature: -10°C50°C
Storage Humidity: 20% 80% RH
Altitude: ≤2000m
RCD test: 30mA
RCD working voltage: 220V±20V
GFCI test: 5mA
GFCI working voltage: 110V±20V
Package Included:
1 x Socket Tester

Features:
operating voltage: 48250V/4565Hz
Measure voltage (with LCD): 48250V/4565Hz
accuracy:± (2.0% 2)
operating temperature: 0°C40°C
operating Humidity: 20% 75% RH
Storage temperature: -10°C50°C
Storage Humidity: 20% 80% RH
Altitude: ≤2000m
RCD test: 30mA
RCD working voltage: 220V±20V
GFCI test: 5mA
GFCI working voltage: 110V±20V
Package Included:
1 x Socket Tester

Features:
operating voltage: 48250V/4565Hz
Measure voltage (with LCD): 48250V/4565Hz
accuracy:± (2.0% 2)
operating temperature: 0°C40°C
operating Humidity: 20% 75% RH
Storage temperature: -10°C50°C
Storage Humidity: 20% 80% RH
Altitude: ≤2000m
RCD test: 30mA
RCD working voltage: 220V±20V
GFCI test: 5mA
GFCI working voltage: 110V±20V
Package Included:
1 x Socket Tester

Description:
Description
100% brand new and high quality
Dimensions: 123*65 (mm)
Ambient temperature: 0～40 (℃)
Power supply voltage: 9 (V)
Features:High resolution and fast response
LCD display, digital precision
Date retention, value can be retained
Low battery indicator
Symbol and unit display for easy reading and access
Products include:1*Moisture meter (not including battery)
Preview:

12 Cutting Positions Fiber Tools Fiber Optical New Practical Durable Useful
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* For Sumitomo FC-6S Fiber Cleaver Disc
* High cutting accuracy, high positioning accuracy
* Good abrasion resistance
Specification:
* Cleaver Type: FC-6S
* Material: Tungsten Carbide
* Disc: 12 Cutting Positions
* Size: 20mm (D) * 3.4mm (T)(Approx.)
* Cleaver Life: 36,000 Times
Package Contents:
1*FC-6S Fiber Cleaver Disc
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Tungsten Carbide Fiber Tools Abrasion resistance Cleaver New Practical
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* For Sumitomo FC-6S Fiber Cleaver Disc
* High cutting accuracy, high positioning accuracy
* Good abrasion resistance
Specification:
* Cleaver Type: FC-6S
* Material: Tungsten Carbide
* Disc: 12 Cutting Positions
* Size: 20mm (D) * 3.4mm (T)(Approx.)
* Cleaver Life: 36,000 Times
Package Contents:
1*FC-6S Fiber Cleaver Disc
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

3-36V Car LCD Digital Electric Voltage-Test Pen&Probe Detector Tester LED Light
Item Details:
*DC 3-36V Car LCD Digital Electric Voltage Test Pen with LED Light
*LCD Digital display, easy to read
*Pure copper probe, good electrical conductivity, not easy to rust
*With TPU spring wire, good elasticity and pure copper alligator clip
*Used as car voltage measuring tool, durable and safe
*Easy to operate
*100% brand new and high quality
*Color: As Pictures Show
*Voltage Range: 3-36V
*Spring Line Extended Length: 1.65m (Approx.)
Package Contents:
1*Voltage Test Pen
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

5-36V Electric Voltage Test Pen Probe Tester Meter LED Light Spring Wire & Clip
Item Details:
*DC 3-36V Car LCD Digital Electric Voltage Test Pen with LED Light
*LCD Digital display, easy to read
*Pure copper probe, good electrical conductivity, not easy to rust
*With TPU spring wire, good elasticity and pure copper alligator clip
*Used as car voltage measuring tool, durable and safe
*Easy to operate
*100% brand new and high quality
*Color: As Pictures Show
*Voltage Range: 3-36V
*Spring Line Extended Length: 1.65m (Approx.)
Package Contents:
1*Voltage Test Pen
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

5-36V Voltage Test Pen Detector Light Measuring tool Durable Protective
Item Details:
*DC 3-36V Car LCD Digital Electric Voltage Test Pen with LED Light
*LCD Digital display, easy to read
*Pure copper probe, good electrical conductivity, not easy to rust
*With TPU spring wire, good elasticity and pure copper alligator clip
*Used as car voltage measuring tool, durable and safe
*Easy to operate
*100% brand new and high quality
*Color: As Pictures Show
*Voltage Range: 3-36V
*Spring Line Extended Length: 1.65m (Approx.)
Package Contents:
1*Voltage Test Pen
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Probe Voltage Test Pen Tester LED 5-36V Electric Light 1.65m Safety Easy use
Item Details:
*DC 3-36V Car LCD Digital Electric Voltage Test Pen with LED Light
*LCD Digital display, easy to read
*Pure copper probe, good electrical conductivity, not easy to rust
*With TPU spring wire, good elasticity and pure copper alligator clip
*Used as car voltage measuring tool, durable and safe
*Easy to operate
*100% brand new and high quality
*Color: As Pictures Show
*Voltage Range: 3-36V
*Spring Line Extended Length: 1.65m (Approx.)
Package Contents:
1*Voltage Test Pen
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

LCD&Digital Electric Voltage 5-36V Cars Probes Tester LED Light Pen Detectors
Item Details:
*DC 3-36V Car LCD Digital Electric Voltage Test Pen with LED Light
*LCD Digital display, easy to read
*Pure copper probe, good electrical conductivity, not easy to rust
*With TPU spring wire, good elasticity and pure copper alligator clip
*Used as car voltage measuring tool, durable and safe
*Easy to operate
*100% brand new and high quality
*Color: As Pictures Show
*Voltage Range: 3-36V
*Spring Line Extended Length: 1.65m (Approx.)
Package Contents:
1*Voltage Test Pen
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

12V/24V/220V Digital Humidity Controller Control Switch Hygrometer Hygrostats
Detail:
*Digital Humidity Controller Hygrometer Hygrostat with Humidity Sensor
*Automatically control your humidifier on/off to adjust the humidity in your room.
*High performance and accurate control.
*Easy operation.
*Item Condition:100% Brand New
*Color: As Pictures Show
*Input Voltage:12V/24V/220V (Optional)
*Load Power:
12V: 120W
24V: 240W
220V: 1500W
*Measuring range:00% ~99% RH
*Accuracy:±2% RH
*Resolution:0.1% RH
*Output type:Direct output
*Dimension: 60*45*31mm(Approx.)
*Mounting hole distance:about 73mm
Instructions:
1.Connect to power supply, display current humidity.
2.Set start the humidity: Press the UP button display start the humidity , long press about 3s the start the humidity flashing , then press the UP or Down adjust the set.
3.Set to stop the humidity: Press the Down button display Stop the humidity , long press about 3s the Stop the humidity flashing , then press the UP or Down adjust the set.
4.Restore the factory Settings: Press the UP and Down button at the same time , will display 888, then will Automatically detect the humidity.
Package Contents:
1*Humidity Controller
1*Humidity Sensor Cable
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

12V/24V/220V Digital Humidity Controller Control Switch Hygrometer Hygrostats
Detail:
*Digital Humidity Controller Hygrometer Hygrostat with Humidity Sensor
*Automatically control your humidifier on/off to adjust the humidity in your room.
*High performance and accurate control.
*Easy operation.
*Item Condition:100% Brand New
*Color: As Pictures Show
*Input Voltage:12V/24V/220V (Optional)
*Load Power:
12V: 120W
24V: 240W
220V: 1500W
*Measuring range:00% ~99% RH
*Accuracy:±2% RH
*Resolution:0.1% RH
*Output type:Direct output
*Dimension: 60*45*31mm(Approx.)
*Mounting hole distance:about 73mm
Instructions:
1.Connect to power supply, display current humidity.
2.Set start the humidity: Press the UP button display start the humidity , long press about 3s the start the humidity flashing , then press the UP or Down adjust the set.
3.Set to stop the humidity: Press the Down button display Stop the humidity , long press about 3s the Stop the humidity flashing , then press the UP or Down adjust the set.
4.Restore the factory Settings: Press the UP and Down button at the same time , will display 888, then will Automatically detect the humidity.
Package Contents:
1*Humidity Controller
1*Humidity Sensor Cable
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Digital Humidity Control Controller Switch Hygrostat Hygrometer Sensor Equipment
Detail:
*Digital Humidity Controller Hygrometer Hygrostat with Humidity Sensor
*Automatically control your humidifier on/off to adjust the humidity in your room.
*High performance and accurate control.
*Easy operation.
*Item Condition:100% Brand New
*Color: As Pictures Show
*Input Voltage:12V/24V/220V (Optional)
*Load Power:
12V: 120W
24V: 240W
220V: 1500W
*Measuring range:00% ~99% RH
*Accuracy:±2% RH
*Resolution:0.1% RH
*Output type:Direct output
*Dimension: 60*45*31mm(Approx.)
*Mounting hole distance:about 73mm
Instructions:
1.Connect to power supply, display current humidity.
2.Set start the humidity: Press the UP button display start the humidity , long press about 3s the start the humidity flashing , then press the UP or Down adjust the set.
3.Set to stop the humidity: Press the Down button display Stop the humidity , long press about 3s the Stop the humidity flashing , then press the UP or Down adjust the set.
4.Restore the factory Settings: Press the UP and Down button at the same time , will display 888, then will Automatically detect the humidity.
Package Contents:
1*Humidity Controller
1*Humidity Sensor Cable
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Digital Humidity Control Controller Switch Hygrostat Hygrometer Sensor Equipment
Detail:
*Digital Humidity Controller Hygrometer Hygrostat with Humidity Sensor
*Automatically control your humidifier on/off to adjust the humidity in your room.
*High performance and accurate control.
*Easy operation.
*Item Condition:100% Brand New
*Color: As Pictures Show
*Input Voltage:12V/24V/220V (Optional)
*Load Power:
12V: 120W
24V: 240W
220V: 1500W
*Measuring range:00% ~99% RH
*Accuracy:±2% RH
*Resolution:0.1% RH
*Output type:Direct output
*Dimension: 60*45*31mm(Approx.)
*Mounting hole distance:about 73mm
Instructions:
1.Connect to power supply, display current humidity.
2.Set start the humidity: Press the UP button display start the humidity , long press about 3s the start the humidity flashing , then press the UP or Down adjust the set.
3.Set to stop the humidity: Press the Down button display Stop the humidity , long press about 3s the Stop the humidity flashing , then press the UP or Down adjust the set.
4.Restore the factory Settings: Press the UP and Down button at the same time , will display 888, then will Automatically detect the humidity.
Package Contents:
1*Humidity Controller
1*Humidity Sensor Cable
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

12V/24V/220V Digital Humidity Controller Sensor Switch Hygrometer Humidifier
Detail:
*Digital Humidity Controller Hygrometer Hygrostat with Humidity Sensor
*Automatically control your humidifier on/off to adjust the humidity in your room.
*High performance and accurate control.
*Easy operation.
*Item Condition:100% Brand New
*Color: As Pictures Show
*Input Voltage:12V/24V/220V (Optional)
*Load Power:
12V: 120W
24V: 240W
220V: 1500W
*Measuring range:00% ~99% RH
*Accuracy:±2% RH
*Resolution:0.1% RH
*Output type:Direct output
*Dimension: 60*45*31mm(Approx.)
*Mounting hole distance:about 73mm
Instructions:
1.Connect to power supply, display current humidity.
2.Set start the humidity: Press the UP button display start the humidity , long press about 3s the start the humidity flashing , then press the UP or Down adjust the set.
3.Set to stop the humidity: Press the Down button display Stop the humidity , long press about 3s the Stop the humidity flashing , then press the UP or Down adjust the set.
4.Restore the factory Settings: Press the UP and Down button at the same time , will display 888, then will Automatically detect the humidity.
Package Contents:
1*Humidity Controller
1*Humidity Sensor Cable
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

12V/24V/220V Digital Humidity Controller Sensor Switch Hygrometer Humidifier
Detail:
*Digital Humidity Controller Hygrometer Hygrostat with Humidity Sensor
*Automatically control your humidifier on/off to adjust the humidity in your room.
*High performance and accurate control.
*Easy operation.
*Item Condition:100% Brand New
*Color: As Pictures Show
*Input Voltage:12V/24V/220V (Optional)
*Load Power:
12V: 120W
24V: 240W
220V: 1500W
*Measuring range:00% ~99% RH
*Accuracy:±2% RH
*Resolution:0.1% RH
*Output type:Direct output
*Dimension: 60*45*31mm(Approx.)
*Mounting hole distance:about 73mm
Instructions:
1.Connect to power supply, display current humidity.
2.Set start the humidity: Press the UP button display start the humidity , long press about 3s the start the humidity flashing , then press the UP or Down adjust the set.
3.Set to stop the humidity: Press the Down button display Stop the humidity , long press about 3s the Stop the humidity flashing , then press the UP or Down adjust the set.
4.Restore the factory Settings: Press the UP and Down button at the same time , will display 888, then will Automatically detect the humidity.
Package Contents:
1*Humidity Controller
1*Humidity Sensor Cable
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Humidity Controller 12V/24V/220V W/ Sensor Cable For Humidifier Hygrostat
Detail:
*Digital Humidity Controller Hygrometer Hygrostat with Humidity Sensor
*Automatically control your humidifier on/off to adjust the humidity in your room.
*High performance and accurate control.
*Easy operation.
*Item Condition:100% Brand New
*Color: As Pictures Show
*Input Voltage:12V/24V/220V (Optional)
*Load Power:
12V: 120W
24V: 240W
220V: 1500W
*Measuring range:00% ~99% RH
*Accuracy:±2% RH
*Resolution:0.1% RH
*Output type:Direct output
*Dimension: 60*45*31mm(Approx.)
*Mounting hole distance:about 73mm
Instructions:
1.Connect to power supply, display current humidity.
2.Set start the humidity: Press the UP button display start the humidity , long press about 3s the start the humidity flashing , then press the UP or Down adjust the set.
3.Set to stop the humidity: Press the Down button display Stop the humidity , long press about 3s the Stop the humidity flashing , then press the UP or Down adjust the set.
4.Restore the factory Settings: Press the UP and Down button at the same time , will display 888, then will Automatically detect the humidity.
Package Contents:
1*Humidity Controller
1*Humidity Sensor Cable
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Humidity Controller 12V/24V/220V W/ Sensor Cable For Humidifier Hygrostat
Detail:
*Digital Humidity Controller Hygrometer Hygrostat with Humidity Sensor
*Automatically control your humidifier on/off to adjust the humidity in your room.
*High performance and accurate control.
*Easy operation.
*Item Condition:100% Brand New
*Color: As Pictures Show
*Input Voltage:12V/24V/220V (Optional)
*Load Power:
12V: 120W
24V: 240W
220V: 1500W
*Measuring range:00% ~99% RH
*Accuracy:±2% RH
*Resolution:0.1% RH
*Output type:Direct output
*Dimension: 60*45*31mm(Approx.)
*Mounting hole distance:about 73mm
Instructions:
1.Connect to power supply, display current humidity.
2.Set start the humidity: Press the UP button display start the humidity , long press about 3s the start the humidity flashing , then press the UP or Down adjust the set.
3.Set to stop the humidity: Press the Down button display Stop the humidity , long press about 3s the Stop the humidity flashing , then press the UP or Down adjust the set.
4.Restore the factory Settings: Press the UP and Down button at the same time , will display 888, then will Automatically detect the humidity.
Package Contents:
1*Humidity Controller
1*Humidity Sensor Cable
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

BSIDE FWT82 Network LAN Cable Tester RJ45 / RJ11 Wire Tracker Tracer Line Finder
Features:
100% brand new and high quality
Made of high-quality materials, durable
Homing type: RJ45, RJ11 and metal wire
Line function: detect open circuit, short circuit and line sequence
Network line integrity test: test the integrity of the network line and line configuration
Detect network cable open circuit, short circuit, error and reverse connection
Open and close function: judge whether the cable is continuous
Switch port detection: detect the link status inside the switch
Tracking signal: digital analog signal
Operating temperature and relative humidity: 0-40degree Celsius, up to 80% (non-condensing)
Storage temperature and relative humidity: -10-50degree Celsius, up to 80% (non-condensing)
Altitude: less than 2000m
Explosion-proof grade IP40
Transmission distance:> 1000 meters
Safety level: iec61010-1 600V CAT III, pollution level II
Product parameters:
Product weight: 150g
Product size: Receiver: 17.5x4.5x3.5cm / 6.89x1.77x1.38"; Transmitter: -12x4.8x3.4cm / 4.72x1.89x1.34"
Transmitter battery: 6F22/9V (not included)
Receiver battery: 6F22/9V (not included)
Package Included:
1 * Receiver
1 * transmitter
1 *RJ11 connector clamp
1 *RJ45 connector network cable
1 * Anti-mold cloth cover
1 *User Manual
1 *Packing box
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

FWT81 Cable Tracker RJ45,RJ11 Telephone Wire Network LAN TV Line Finder Tester
Features:
100% brand new and high quality
Made of high-quality materials, durable
Homing type: RJ45, RJ11 and metal wire
Line function: detect open circuit, short circuit and line sequence
Network line integrity test: test the integrity of the network line and line configuration
Detect network cable open circuit, short circuit, error and reverse connection
Open and close function: judge whether the cable is continuous
Switch port detection: detect the link status inside the switch
Tracking signal: digital analog signal
Operating temperature and relative humidity: 0-40degree Celsius, up to 80% (non-condensing)
Storage temperature and relative humidity: -10-50degree Celsius, up to 80% (non-condensing)
Altitude: less than 2000m
Explosion-proof grade IP40
Transmission distance:> 1000 meters
Safety level: iec61010-1 600V CAT III, pollution level II
Product parameters:
Product weight: 150g
Product size: Receiver: 17.5x4.5x3.5cm / 6.89x1.77x1.38"; Transmitter: -12x4.8x3.4cm / 4.72x1.89x1.34"
Transmitter battery: 6F22/9V (not included)
Receiver battery: 6F22/9V (not included)
Package Included:
1 * Receiver
1 * transmitter
1 *RJ11 connector clamp
1 *RJ45 connector network cable
1 * Anti-mold cloth cover
1 *User Manual
1 *Packing box
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
100% brand new and high quality
Made of high-quality materials, durable
Homing type: RJ45, RJ11 and metal wire
Line function: detect open circuit, short circuit and line sequence
Network line integrity test: test the integrity of the network line and line configuration
Detect network cable open circuit, short circuit, error and reverse connection
Open and close function: judge whether the cable is continuous
Switch port detection: detect the link status inside the switch
Tracking signal: digital analog signal
Operating temperature and relative humidity: 0-40degree Celsius, up to 80% (non-condensing)
Storage temperature and relative humidity: -10-50degree Celsius, up to 80% (non-condensing)
Altitude: less than 2000m
Explosion-proof grade IP40
Transmission distance:> 1000 meters
Safety level: iec61010-1 600V CAT III, pollution level II
Product parameters:
Product weight: 150g
Product size: Receiver: 17.5x4.5x3.5cm / 6.89x1.77x1.38"; Transmitter: -12x4.8x3.4cm / 4.72x1.89x1.34"
Transmitter battery: 6F22/9V (not included)
Receiver battery: 6F22/9V (not included)
Package Included:
1 * Receiver
1 * transmitter
1 *RJ11 connector clamp
1 *RJ45 connector network cable
1 * Anti-mold cloth cover
1 *User Manual
1 *Packing box
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

SSB 2.7K Narrowband Filter Compatible With YF-122S For YAESU FT-817/857/8
Product description:
100% brand new and high quality
Made of high-quality materials, durable
The center frequency is 455K and the bandwidth is 1K. It is suitable for CW mode or SSB mode. The effect is particularly obvious in CW mode. After turning on the filter to filter out most of the noise, there is only a ticking sound, which can significantly improve the recognition rate; bandwidth voice SSB is obvious Reduce the noise, but the sound can still be recognized. It sounds a bit awkward to hear what the other party says. It is not recommended to use the SSB bandwidth filter of 1K, and consider using the 2.7K bandwidth.
The identification circuit with the original filter can be inserted into the machine to identify which kind of filter, the filter can generally display 500, 2.7k 1K on the screen displayed on the filter 2.3 screen, so it is only more than the display FIL1 FIL2 Intuitive, of course, you can also let him display FIL1 FIL2
Installation:
The installation position of the two filters (817a) has four pins on one side and three pins on the other side.After turning off the power of the machine, align the pins of the filters and open the machine cover. After installing the power supply, you can filter to enter the opened menu.
If the purchased 1K and 2.7K filters can be identified by the characters printed on the filter, the CFJ455K8 model is a 1K bandwidth filter; CFJ455K13 is a 2.7K filter, no matter how long the slot is installed, two plugs The slots can be easily reversed, and after installation, you can identify your boot machine is 1K, that is, 2.7K.
Package list:
1 *Narrowband filter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Industrial Narrowband filter Inspection 1 pcs Useful Practical Pro New
Product description:
100% brand new and high quality
Made of high-quality materials, durable
The center frequency is 455K and the bandwidth is 1K. It is suitable for CW mode or SSB mode. The effect is particularly obvious in CW mode. After turning on the filter to filter out most of the noise, there is only a ticking sound, which can significantly improve the recognition rate; bandwidth voice SSB is obvious Reduce the noise, but the sound can still be recognized. It sounds a bit awkward to hear what the other party says. It is not recommended to use the SSB bandwidth filter of 1K, and consider using the 2.7K bandwidth.
The identification circuit with the original filter can be inserted into the machine to identify which kind of filter, the filter can generally display 500, 2.7k 1K on the screen displayed on the filter 2.3 screen, so it is only more than the display FIL1 FIL2 Intuitive, of course, you can also let him display FIL1 FIL2
Installation:
The installation position of the two filters (817a) has four pins on one side and three pins on the other side.After turning off the power of the machine, align the pins of the filters and open the machine cover. After installing the power supply, you can filter to enter the opened menu.
If the purchased 1K and 2.7K filters can be identified by the characters printed on the filter, the CFJ455K8 model is a 1K bandwidth filter; CFJ455K13 is a 2.7K filter, no matter how long the slot is installed, two plugs The slots can be easily reversed, and after installation, you can identify your boot machine is 1K, that is, 2.7K.
Package list:
1 *Narrowband filter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

2.7K Narrowband Filter Compatible YF-122S YAESU FT-817/818/857 897 SSB CFJ455K13
Product description:
100% brand new and high quality
Made of high-quality materials, durable
The center frequency is 455K and the bandwidth is 1K. It is suitable for CW mode or SSB mode. The effect is particularly obvious in CW mode. After turning on the filter to filter out most of the noise, there is only a ticking sound, which can significantly improve the recognition rate; bandwidth voice SSB is obvious Reduce the noise, but the sound can still be recognized. It sounds a bit awkward to hear what the other party says. It is not recommended to use the SSB bandwidth filter of 1K, and consider using the 2.7K bandwidth.
The identification circuit with the original filter can be inserted into the machine to identify which kind of filter, the filter can generally display 500, 2.7k 1K on the screen displayed on the filter 2.3 screen, so it is only more than the display FIL1 FIL2 Intuitive, of course, you can also let him display FIL1 FIL2
Installation:
The installation position of the two filters (817a) has four pins on one side and three pins on the other side.After turning off the power of the machine, align the pins of the filters and open the machine cover. After installing the power supply, you can filter to enter the opened menu.
If the purchased 1K and 2.7K filters can be identified by the characters printed on the filter, the CFJ455K8 model is a 1K bandwidth filter; CFJ455K13 is a 2.7K filter, no matter how long the slot is installed, two plugs The slots can be easily reversed, and after installation, you can identify your boot machine is 1K, that is, 2.7K.
Package list:
1 *Narrowband filter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Nice Narrowband filter Module Rectangular connector Practical Pro Durable
Product description:
100% brand new and high quality
Made of high-quality materials, durable
The center frequency is 455K and the bandwidth is 1K. It is suitable for CW mode or SSB mode. The effect is particularly obvious in CW mode. After turning on the filter to filter out most of the noise, there is only a ticking sound, which can significantly improve the recognition rate; bandwidth voice SSB is obvious Reduce the noise, but the sound can still be recognized. It sounds a bit awkward to hear what the other party says. It is not recommended to use the SSB bandwidth filter of 1K, and consider using the 2.7K bandwidth.
The identification circuit with the original filter can be inserted into the machine to identify which kind of filter, the filter can generally display 500, 2.7k 1K on the screen displayed on the filter 2.3 screen, so it is only more than the display FIL1 FIL2 Intuitive, of course, you can also let him display FIL1 FIL2
Installation:
The installation position of the two filters (817a) has four pins on one side and three pins on the other side.After turning off the power of the machine, align the pins of the filters and open the machine cover. After installing the power supply, you can filter to enter the opened menu.
If the purchased 1K and 2.7K filters can be identified by the characters printed on the filter, the CFJ455K8 model is a 1K bandwidth filter; CFJ455K13 is a 2.7K filter, no matter how long the slot is installed, two plugs The slots can be easily reversed, and after installation, you can identify your boot machine is 1K, that is, 2.7K.
Package list:
1 *Narrowband filter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Industrial Narrowband filter Measurement Inspection 1 pcs Useful Module
Product description:
100% brand new and high quality
Made of high-quality materials, durable
The center frequency is 455K and the bandwidth is 1K. It is suitable for CW mode or SSB mode. The effect is particularly obvious in CW mode. After turning on the filter to filter out most of the noise, there is only a ticking sound, which can significantly improve the recognition rate; bandwidth voice SSB is obvious Reduce the noise, but the sound can still be recognized. It sounds a bit awkward to hear what the other party says. It is not recommended to use the SSB bandwidth filter of 1K, and consider using the 2.7K bandwidth.
The identification circuit with the original filter can be inserted into the machine to identify which kind of filter, the filter can generally display 500, 2.7k 1K on the screen displayed on the filter 2.3 screen, so it is only more than the display FIL1 FIL2 Intuitive, of course, you can also let him display FIL1 FIL2
Installation:
The installation position of the two filters (817a) has four pins on one side and three pins on the other side.After turning off the power of the machine, align the pins of the filters and open the machine cover. After installing the power supply, you can filter to enter the opened menu.
If the purchased 1K and 2.7K filters can be identified by the characters printed on the filter, the CFJ455K8 model is a 1K bandwidth filter; CFJ455K13 is a 2.7K filter, no matter how long the slot is installed, two plugs The slots can be easily reversed, and after installation, you can identify your boot machine is 1K, that is, 2.7K.
Package list:
1 *Narrowband filter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Item Details:
*DC 3-36V Car LCD Digital Electric Voltage Test Pen with LED Light
*LCD Digital display, easy to read
*Pure copper probe, good electrical conductivity, not easy to rust
*With TPU spring wire, good elasticity and pure copper alligator clip
*Used as car voltage measuring tool, durable and safe
*Easy to operate
*100% brand new and high quality
*Color: As Pictures Show
*Voltage Range: 3-36V
*Spring Line Extended Length: 1.65m (Approx.)
Package Contents:
1*Voltage Test Pen
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

The Voltcraft FM-200 Moisture Meter is a robust and precise measuring device for determining the moisture content in wood, plasterboard and a variety of other materials used in construction. There are two measuring ranges for construction materials and wo

The Voltcraft AT-200 Digital Multimeter is an above average quality product from a branded family which has distinguished itself in the field of measuring, charging and network technology by particular competence and permanent innovation. Supplied with 1