Kategóriák

Kategóriák

Fémmegmunkáló berendezések

Aktív szűrők

  • Nincs szín - 6 mm-es 2 furulós gömbölyű orrvég maró esztergavágó CNC bit eszköz

    288,00 Ft
    Features:High-density polished, super hard,wear-resistant, high temperature.
    Mainly used in cutting and hook slots.
    Specification:Material: HSS
    Flutes: Two Flutes
    Mill diameter: 4mm
    Shank diameter: 6mm
    Flute length: 11mm
    Total length: 55mm
    Package included:1x 2 Flute Ball Nose Mill End .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
  • Nincs szín - Gyorskioldó kapcsoló bilincs vízszintes rögzítő tartó kapacitása 280 kg acél

    383,00 Ft
    Feature:1. Selected high grade 304 stainless steel, rustproof and anti-corrosion.
    2. Rubber holding bar can hold the workpiece in place without any damage to it.
    3. 4-hole mount base for more stable clamping.
    4. Plastic wrapped handle makes operation comfortable and easy.
    5. Lever structure , saving time and effort.
    Specification:
    Item Type: Toggle Clamp
    Material: 304 Stainless Steel
    Holding Capacity: 280KG
    Adjustment Range: 25mm/0.98in
    Stem Diameter: 4mm/0.16in
    Mount Hole Diameter: 9x6.7mm / 0.35x0.26in
    Mount Hole Distance: 22.2x20.8mm / 0.87x0.82in
    Steel Plate Thickness: 1.5mm/0.06in
    Package List:
    1 x Handle
    1 x Holding Bar
  • Nincs szín - 1db Chucking Reamer HSS H8 egyenes szárú chucking kézi orsó fúrófej

    517,00 Ft
    Features:100% brand new and high quality
    Universal, size from 3mm to 16mm
    Material: HSS
    Application: Generally applicable to through-hole, blind hole processing, for hole processing chip scrap removal is particularly outstanding
    Package Included:1 x Drill Hand Reamer
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
  • Nincs szín - 36/40/48 furatok Z023 Osztótábla indexelő lemez Forgótábla osztótábla

    569,00 Ft
    Feature:
    The indexing plate is a machine tool accessory that holds the workpiece on the chuck or between two pinnacles and rotates, indexing and positioning it.
    The product is mostly used in machine automation equipment.
    Made of premium iron, more durable.
    Light weight, easy to install and use.
    This indexing plate has 36/40/48 holes.
    Specification:Model: Z023
    Material: Iron
    Weight: 29g / 1.0oz
    Package list:1 * Dividend Plate
    Note:The actual product color may deviate from the photo due to light.
    There may be a slight deviation in the measurement of product.
  • Nincs szín - Kopásállóságú famegmunkáló vágószárvágó famegmunkálás fiókok készítéséhez

    571,00 Ft
    Wear Resistance Woodworking Cutter Shank Cutter Woodworking for Making Drawers
    Feature:1. Used for making drawers or other woodworkings by hand, widely applications.
    2. The cutter can cut stock smoothly, cleaning, no debris, for all straight cut needs.
    3. Laminate and heat resistant coating, reliable and durable in use, high hardness.
    4. Quality hard alloy material manufacturing ensuring maximum durability.
    5. Great replacement bit tool for woodworking carpenter, meeting different demands.
    Specification:
    Condition: 100% Brand New
    Item Type: Milling Cutter
    Material: Hard Alloy
    Model: 6 x 5/16 Keyhole Knife
    Blade Length: Approx. 10mm / 0.4in
    Ball Head Diameter: Approx. 8mm / 0.3in
    Length: Approx. 46mm / 1.8in
    Shank Length: Approx. 6mm / 0.2in
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
    Package List:1 x Milling Cutter
  • Nincs szín - Minőségi kemény szárú maró laminált maró vágáshoz Fiókok készítése

    573,00 Ft
    Quality Hard Shank Cutter Laminate Milling Cutter for Cut needs Making Drawers
    Feature:1. Used for making drawers or other woodworkings by hand, widely applications.
    2. The cutter can cut stock smoothly, cleaning, no debris, for all straight cut needs.
    3. Laminate and heat resistant coating, reliable and durable in use, high hardness.
    4. Quality hard alloy material manufacturing ensuring maximum durability.
    5. Great replacement bit tool for woodworking carpenter, meeting different demands.
    Specification:
    Condition: 100% Brand New
    Item Type: Milling Cutter
    Material: Hard Alloy
    Model: 6 x 3/8 Keyhole Knife
    Blade Length: Approx. 11mm / 0.4in
    Ball Head Diameter: Approx. 9.52mm / 0.4in
    Length: Approx. 46mm / 1.8in
    Shank Length: Approx. 6mm / 0.2in
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
    Package List:1 x Milling Cutter
  • Nincs szín - Végmaró átmérője 3 mm-es marómaró HSS és alumínium a horognyílások vágásához

    595,00 Ft
    Features:
    100% brand new and high quality
    It is made of high quality material, durable in use
    High-density polished, super-hard,wear-resistant, high temperature.
    Mainly used in cutting and hook slots.
    Great tool replacement for the broken one
    Specification:
    Material: HSSAL
    Flutes : Three Flutes
    Mill diameter: 3mm /0.1in
    Shank diameter: 6mm /0.2in
    Flute length: 19mm/0.7in
    Total length: 63mm /2.5in
    Package included:
    1 x End Mill Cutter CNC Bit Extended
  • Nincs szín - 1db Chucking Reamer HSS H8 egyenes szárú chucking kézi orsó fúrófej

    599,00 Ft
    Features:100% brand new and high quality
    Universal, size from 3mm to 16mm
    Material: HSS
    Application: Generally applicable to through-hole, blind hole processing, for hole processing chip scrap removal is particularly outstanding
    Package Included:1 x Drill Hand Reamer
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
  • Nincs szín - Ingyenes hegesztéstartó arclemez ABS égésgátló anyagú falpanel otthoni használatra

    616,00 Ft
    Features:1. The panel is made of ABS flame retardant material, which is solid and durable.
    2. American type junction box / wall socket cover / wire hole cover.
    3. Free welding and flexible wiring
    4. Applicable for engineering wiring.
    5. Wall panel comes with mounting screws for easy installation.
    Specification:Condition: 100% Brand New
    Material: ABS
    Color: White
    Size: Approx. 11.5 * 7 * 2.6cm / 4.53 * 2.76 * 1.02inch
    Weight: Approx. 20g
    Package List:1 * Face Plate
    2 * Screws
  • Nincs szín - Fúrószalag kopásálló 10 hüvelykes elektromos csiszoló mini fúrógép

    662,00 Ft
    Features:
    1. 100% brand new and high quality.
    2. Made of high quality copper material, wear resistant and durable in use.
    3. Knurled collet is convenient to install and disassemble.
    4. Including 10pcs collets with clamping capability of 0.5-3.2mm, which can clamp different shank diameter of tools like drill bits, grinding head bits, etc.
    5. Compatible with most of tools such as mini power drill, electric grinder, etc.
    Specification:
    Material: Copper
    Size(mm): 0.5, 0.8, 1.0, 1.2, 1.5, 1.8, 2.0, 2.4, 3.0, 3.2
    Package Weight: 25g (approx.)
    Package List:
    10 x Collets
    1 x Collet
  • Nincs szín - 1db Chucking Reamer HSS H8 egyenes szárú chucking kézi orsó fúrófej

    673,00 Ft
    Features:100% brand new and high quality
    Universal, size from 3mm to 16mm
    Material: HSS
    Application: Generally applicable to through-hole, blind hole processing, for hole processing chip scrap removal is particularly outstanding
    Package Included:1 x Drill Hand Reamer
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
  • Nincs szín - 4db tengelykapcsoló motor csatlakozó DIY kormányhossz 23mm OD 9mm univerzális

    701,00 Ft
    4pcs Shaft Coupling Motor Connector DIY Steering Length 23mm OD 9mm Universal
    Features:
    100% brand new and high quality.
    This joint or coupling connects rigid rods whose axes are inclined to each other.
    Made of premium metal material, it is durable and has long service life.
    It is commonly used for shafts that transmit rotary motion.
    Widely used for connecting model , model ships, robots, etc.
    Specification:
    Material: Nickle plated iron
    Inner Diameter: 2*3mm, 3*4mm, 3*3mm, 3.175*4mm, 2*4mm, 3.17*3.17mm, 2.3*4mm, 2.3*3mm (Optional)
    Length: 23mm / 0.9in
    Outer Diameter: 9mm / 0.4in
    Weight: 32g / 1.1oz (approx.)
    Package list:
    4 * Universal Joints (with Set Screws)
    1 * Hex Key
  • Nincs szín - 10db 1,5 mm vágóélű maró CNC gravírozó bit 1/8 &quot szár

    800,00 Ft
    Features:
    Adopted of high quality carbide tips, exquisite workmanship, durable in use.
    Easy to use, not easy to rust.
    Suitable for processing of ordinary steel and ordinary stainless steel, such as 45 steel, A3 steel, stainless steel 201, 304 and other soft material.
    This set includes 10 pcs carbide inserts, so it provides convenience to replace the broken one.
    Good chemical stability, heat resistance, good wear resistance, high hardness.
    Specifications:
    Model: APMT1135PDER-M2 VP15TF
    Material: carbide
    Size: 11x 6 x 3.5mm/0.43 x 0.24 x 0.14inch(manual measurement, 1-3mm error)
    Color: purple bronze
    Quantity: 10 PCS
    Blade description:
    A = blade shape is parallelogram
    P = clearance angle is 11 degrees
    M = blade tolerance
    T = blade lock mode
    11 = cutting edge is 11mm
    35 = the blade thickness is 3.5 mm
    M2 = R0.4 precision milling (for precision machining)
    VP15TF = processing material
    Packaging: plastic box(yellow, red, blue random)
    Package Included:
    10 x CNC Carbide Tips Inserts
  • Nincs szín - CNC marás Kno robusztus, tartós, 2 darab BT30 CNC 45 fokos döntetlen csapos tartó

    820,00 Ft
    Features:
    MAS specification pull-head screws with BT standard shank.
    Adopt imported steel, heat treated, HRC50 degree.
    Angle Degree: 45 degrees
    Material: Characteristic carbon steel
    Scope of application: CNC machining center
    Specification:Model: BT30 * 45°
    Material: Characteristic carbon steel
    Scope of application: CNC machining center
    Package list:2 * CNC Milling Tool
  • Nincs szín - HSS End Mill lágy anyagok jó keménységű maró vasrézhez

    850,00 Ft
    Description:
    An end mill is a type of milling cutter, a cutting tool used in industrial milling applications. It is distinguished from the drill bit in its application, geometry, and manufacture. While a drill bit can only cut in the axial direction, a milling bit can generally cut in almost all directions.
    Features:
    This set of end mills are made from high speed steel for good hardness and the cutting edge is quite sharp.
    6mm cutting edge and 6mm standard shank diameter would fit for many milling machines or CNC cutting machines.
    These two milling bits can generally cut in almost all directions, including cutting axially.
    End mills are used in milling applications such as profile milling, tracer milling,face milling, and plunging.
    Usually these end mills are used to cuttingiron, copper, aluminum, plastic and many other soft materials.
    Specifications:
    Material: HSS
    Cutting Edge Dia.: 6mm / 0.23"
    Flute: 4
    Shank Dia.: 6mm / 0.23"
    Cutting Edge Length: 13mm / 0.51"
    Overall Length:57mm / 2.24"
    Cutting On: Iron, copper, aluminum, plastic, etc
    Quantity: 2pcs
    Package Includes:
    2 x End Mills
    Note:
    Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
  • Nincs szín - Collet Set Gravírozás Collet Spring Collet 3db CNC maráshoz

    882,00 Ft
    Description:
    These spring collets are made of high quality 65Mn spring steel for CNC milling lathe tool and work-holding engraving machine. There are 3 collets of various sizes in 4mm, 1/8" and 6mm. Collet must be placed into collet chuck nut before inserting into collet chuck.
    Features:
    Made from high quality 65Mn spring steel, they are stable in performance.
    Fine workmanship, good elasticity, high and run-out tolerance is less than 0.008mm.
    Collet must be placed into collet chuck nut before inserting into collet chuck.
    Each collet is marked clearly so you can easily distinguish them.
    Great collet for CNC milling lathe tool and work-holding engraving machine.
    Specifications:
    Material: 65Mn spring steel
    Model: ER11
    Range: 4mm, 1/8", 6mm
    Height: 17mm
    OD: 8mm
    Run-Out Tolerance: <0.008mm
    Package Includes:
    3 x Collets
  • Nincs szín - Menetes Élő Központ Tartós Stabil Nagy Keménység Kiváló Minőségű Élő Központ

    986,00 Ft
    Features:
    1. High , high hardness.
    2. metal construction, durable for long time use.
    3. Built-in high quality bearing ensures the running of the product.
    4. Simple structure, easy to install.
    5. Designed for miniature multifunction lathe.
    Specification:
    Material: Metal
    Length: 20mm
    Outer Diameter: 18mm
    Inner Diameter:12mm
    Thread: M12*1
    Purpose: Resisting the deflection of the machining end of the lathe, the workpiece will deflect when rotated.
    Package Weight: 24g
    Package List:
    1 * Living Center
  • Nincs szín - 60 kg űrtartalom 10 mm-es húzókapcsoló kézi kapcsolókapocs az ellenőrzési hegesztéshez

    1 014,00 Ft
    Feature:
    Manual clamps are mechanical devices that operate manually to position equipment and objects.
    Workpiece that require positioning and clamping can be used. They are commonly used in welding, inspection tools, molds, etc.
    The maximum clamping force is up to 60kg.
    The of the product is galvanized, it is not easy to rust and has a longer service life.
    Push Pull Type, allows you to hold workpiece in a vertical position; A rock-solid grip to install on jigs, tool fixtures, or movable bases.
    Specification:Material: Iron with galvanized treatment
    Clamping force: 60KG
    Range: 10mm
    Fixing hole: 24*29mm
    Fixed hole diameter: 5mm
    Clamping rod screw diameter: 5mm
    Package list:1 * Clamp
    1 * Screw pole
    Note:The actual product color may deviate from the photo due to light.
    There may be a slight deviation in the measurement of product.
  • Nincs szín - Kiváló minőségű 12mm X 12mm X 26mm X 83mm nagysebességű acél HSS 4 fuvola egyenes végű maró

    1 075,00 Ft
    Features:Mill Cutter, usually used to be assembled on milling machine.
    Suitable for CNC data processing center, carved, high-speed machines.
    Can milling of copper, aluminum, tool steel, cast iron, etc.
    High toughness, abrasion resistance, high-speed cutting for the high hardness.
    Can processing directly or fine processing to the heat treatment mold.
    Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time.
    Specifications:
    Material: HSS
    Model: 4 /4.5/ 6 / 8 / 10 / 12mm for your choice
    Size:Cutting diameter*shank diameter*shank length*overall length
    4mm*6mm*11mm*55mm
    4.5mm*6mm*11mm*55mm
    6mm*6mm*13mm*57mm
    8mm*8mm*19mm*63mm
    10mm*10mm*22mm*72mm
    12mm*12mm*26mm*83mm
    Package include
    1 x Mill Cutter .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
  • Nincs szín - Egyfuratos CNC bit 3,175 mm (1/8 &quot ) vágószerszám maró ipari otthoni használatra

    1 079,00 Ft
    Description:
    This is a set of single flute end mills cutting tool used in industrial milling applications. It is distinguished from the drill bit in its application, geometry, and manufacture. Single flute end mills are used for superior chip evacuation in high speed milling. These end mills are made of tungsten carbide which will tolerate a lot more heat while still keep a good hardness.
    Features:
    This set of end mills are made from high quality tungsten carbide for good hardness and the cutting edge is quite .
    1/8inch cutting edge and 1/8inch standard shank diameter would fit for many milling machines or CNC cutting machines.
    Single flute designed end mill with cutting edge would offer a cutting and chip clearing.
    There are total 5 pieces end mills in this set that would be great replacement.
    Usually these end mills are used for cutting acrylic, PVC, MDF, density board,wood and many other soft materials.
    Specifications:
    Material: Tungsten carbide
    Cutting Edge Dia.: 3.175mm(1/8")
    Flute: 1
    Shank Dia.: 3.175mm (1/8")
    Cutting Edge Length: 12mm(0.47")
    Overall Length: Approx. 38mm(1.49")
    Cutting On: Acrylic, PVC, MDF, density board, wood, etc
    Quantity: 5pcs
    Package Includes:
    5 x End Mills
  • Nincs szín - 10db keményfém menetbetét lapát CNC esztergagép szerszám DCMT070204 US735

    1 105,00 Ft
    Features:1. The blade is safe and good toughness, safe and durable to use.
    2. Carbide-PVD composite coating for semi-finishing of steel.
    3. Good cutting effect, reducing cutting force and improving tool life.
    4. Suitable for cutting common steel, convenient to use.
    5. Made of high quality carbide, high hardness, solid and durable to use.
    Specification:Condition: 100% Brand New
    Item Type: Carbide Insert Blade
    Model: DCMT070204 US735 DCMT21.51
    Material: Carbide
    Application: processing steel
    Coating: Carbide PVD
    Color: Gold
    Package List:10 * Carbide Insert Blade
    1 * Wrench
    Note:1. Please allow slight error due to manual measurement. Thanks for your understanding.
    2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
    3. The wrench color is random.
  • Nincs szín - 6 X 10 Ajtó maró maró szekrény Ajtó maró maró egyenesítő maró

    1 153,00 Ft
    6 X 10 Door Milling Cutter Wardrobe Door Milling Cutter Straightener Router Bit
    Feature:1. Wardrobe door straightener, milling cutter router bit, a great tool for woodworking.
    2. Made of high quality carbon steel material, durable and practical to use.
    3. Has the function of outstanding abrasion resistance for long service life.
    4. This door milling cutter is used for wood slotting, with good performance.
    5. Manufactured to meet standard specification, high and maximum durability.
    Specification:
    Condition: 100% Brand New
    Item Type: Wardrobe Door Milling Cutter
    Material: Carbon Steel
    Color: As Pictures Shown
    Model: 6x10
    Blade Length: Approx.8.5mm / 0.3in
    Maximum Cutting Diameter: Approx.10mm / 0.4in
    Uses: Used for Wood Slotting
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
    Package List:1 x Door Milling Cutter 6x10
  • Nincs szín - Kiváló minőségű 10 X 624ZZ 10x7x5cm 624ZZ radiális golyóscsapágy nyomtató B.

    1 157,00 Ft
    Features:
    1. Bearing steel - better quality than common steel, no trouble of repeated installation and maintainence.
    2. Metal - stainless steel sealing material can effectively prevent external dust, foreign matters from entering the of the bearing which may cause bearing interior damage.
    3. High class material - low noise/high accurateness/long lifespan.
    4. Wide use - low noise and friction, high running , not easy to hot, high load.
    5. Durable&reliable - low friction coefficient highly suitable for high running.
    Specifications:
    Item: 624ZZ Micro Bearing for Printer
    Type: Printer Accessories
    Material: Bearing Steel
    Quantity: 10 PCS
    Package size: Approx 10*7*5cm/3.9*2.8*2inch
    Weight: Approx 31g/1.1oz
    Package list:
    10 * 624ZZ Bearings
  • Nincs szín - 5 méret 60 ° HSS középső fúrófej kombinált süllyesztőkészlet 1,5-4 mm vágási átmérő

    1 170,00 Ft
    Features:
    These center drill bits are used in metalworking to provide a starting hole for a larger-sized drill bit.
    They can also be used to make a conical indentation in the end of a workpiece in which to mount a lathe center.
    Made from highspeed steel, these center drill bits are of high hardness and good wear resistance.
    There are total 5 pieces center bits in this set that can be used to drill holes in different sizes.
    Widely used on lathe machines, these center drill bits can cut easily and remove chips smoothly.
    Specifications:
    Material: Highspeed steel
    Angle: 60°
    Cutting Edge Diameter
    1.5mm
    2mm
    2.5mm
    3mm
    4mm
    Shank Diameter
    5mm
    5mm
    6mm
    8mm
    10mm
    Length
    35mm
    41mm
    45mm
    51mm
    60mm
    Quantity: 5pcs
    Package Includes:
    5 x Center Drill Bits
  • Nincs szín - Kézikerék tartós eszterga kézikerék 1db 63mm minden szerszámgéphez

    1 204,00 Ft
    Features:Made of high quality , and durable.
    Comes with a handle, convenient to use.
    Widely used in industrial machine tools, such as milling machine, lathes, grinders etc.
    Novel model, easy to move, with strong carrying capacity.
    Suitable for all machine tools, perfect to replace the broken one.
    Specification:Type: Hand Wheel
    Material:
    Inner diameter: 10mm * 0.4in
    Outer diameter: 63mm / 2.5in
    Weight: 115g / 4.1oz
    Package list:1 * Hand Wheel
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px #000; border-left: 1px #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px #000; border-right: 1px #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
  • Nincs szín - Rögzítő erő függőleges kapcsoló bilincs kapcsoló bilincs a hegesztés ellenőrző eszközhöz

    1 220,00 Ft
    Feature:
    Manual clamps are mechanical devices that operate manually to position equipment and objects.
    Workpiece that require positioning and clamping can be used. They are commonly used in welding, inspection tools, molds, etc.
    The maximum clamping force is up to 100kg.
    The of the product is galvanized, it is not easy to rust and has a longer service life.
    Push Pull Type, allows you to hold workpiece in a vertical position; A rock-solid grip to install on jigs, tool fixtures, or movable bases.
    Specification:Material: Iron with galvanized treatment
    Clamping force: 100KG
    Push-pull range: 20mm
    Fixed screw:
    Screw rod: 6mm
    Package list:1 * Clamp
    1 * Screw pole
    2 *
    Note:The actual product color may deviate from the photo due to light.
    There may be a slight deviation in the measurement of product.
  • Nincs szín - Ködhűtéses spray rendszer kétirányú cső szelep 8 mm-es légcső CNC esztergához

    1 250,00 Ft
    Description:100% brand new and high quality
    Material: Plastic & Metal & Brass
    Color: As the pictures show
    Engraving cooling spray machine, special design, direction of rotation
    Easy to operate. standard fixture, thin door spray, long life
    Specification:Suitable for 8 mm air tube
    Cooling rock / metal / ceramic tile engraving machine
    For CNC Milling drilling machine
    Characteristics:1) a lot of water problems tools easier to
    2) processing the refrigerant can save more than 80% , the cooling effect is nothing less than conventional water-cooled
    3) gas processing chips are taken out, safer work
    4) the gas and coolant is adjustable, easy to use under different processing conditions
    5) until the super-hard alloy machining accuracy of the workpiece can achieve a
    6) not only increases the machining cutting , save time and reduce processing costs and tool wear
    Grades:1. the fluid should be used
    2. Do not use corrosive liquid
    3. In liquid without pressure output required to that the air pressure in the range 5-7KGF / cm2(Atomization and gas, associated gas pressure)
    4. Use the viscosity of the liquid in 68cSt or less
    Quantity: 1Pc
    Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!!
    Package includes:1 x Bidirection Mist Cooling System
  • Nincs szín - Alakú hosszabbító szár tokmány tokmány meghosszabbítja a faragógép részét

    1 259,00 Ft
    Feature:1. Made of high-quality alloy material, strong and durable, and has a long service life
    2. Accurate cutting and production, to meet the requirements of machines and equipment
    3. Alloy material provides high strength and good durability, and anti-corrosion, can be used in harsh environments
    4. The product has a wide range of uses and is suitable for many areas, such as carving machine
    5. The extendable and clamping function is good, very practical , and the small size is convenient for storage
    Specification:
    Item Type: Shaped Extension Rod
    Material: Alloy
    Height: 1.38in
    Nut: ER11 refers to the international standard, which holds the ER11 collet, the clamping range of the collet is 1-10mm
    Hole Diameter: 3/4in
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
    Package List:1 x Shaped Extension Rod
  • Nincs szín - 10db keményfém maró vágó bit kék kukorica vég maró gravírozó bit készlet

    1 295,00 Ft
    Features:1. Using ultra-fine grained carbide materials, with good milling and cutting performance, to ensure high efficiency.
    2. The milling groove, hole and edge of the board are clean, tidy and burr-free.
    3. Made of high quality carbide material, has sufficient flexural strength and wear resistance.
    4. Used for PCB, SMT, CNC, mold, engraving, plastic, copper, stainless steel and other hardware processing.
    5. 10pcs router cutting bits can be used for a long time.
    Specification:Condition: 100% Brand New
    Item Type: Milling Cutter
    Material: Carbide
    Size: 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm (2pcs for each type)
    Quantity: 10pcs/Set
    Full length: Approx. 38mm / 1.5in
    Uses: Used for PCB, SMT, CNC, mold, engraving, plastic, copper, stainless steel and other hardware processing.
    Package List:10 * Milling Cutter
    Note:1. Please allow slight error due to manual measurement. Thanks for your understanding.
    2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
  • Nincs szín - Fúróvágó rúd Tartós CNC-fúrórúd a belső furatlyukak esztergálásához

    1 332,00 Ft
    Feature:1. Made of high quality tungsten steel, not easy to damage or corrosion with high hardness
    2. Possess high accuracy and high clamping stability enabling stable work
    3. The model is clearly expressed, the first number represents diameter of product, and the second number represents diameter of clamping tool
    4. Used for high‑accuracy lathe inner diameter boring bar and small diameter CNC special boring bar
    5. All working parts through fine grinding, which bring smooth surface
    Specification:
    Item Type: Boring bar
    Material: Tungsten steel
    Usage: High-accuracy lathe inner diameter boring bar/small diameter CNC special boring bar
    Product Diameter: Approx. 12mm / 0.5in
    Clamping Tool Diameter: Approx. 4mm / 0.2in.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
    Package List:1 x Boring Bar
  • Nincs szín - Végmaró nagy teherbírású rozsdamentes acél áramköri lapokhoz

    1 371,00 Ft
    Description:
    This set of end mills are made from ultra-fine grain cemented carbide material which ensures good milling, cutting performance and high work efficiency. They are of high strength, hardness and wear resistance and the cutting edges are quite . There are total 10 pieces in this set which you can use for quite a long time and they are all packed and assorted in a plastic box for easy storage. Fine quality, these end mills are very good for processing on many materials including plastics, and metal.
    Features:
    Made from ultra-fine grain cemented carbide material with good milling, cutting performance, ensuring high work efficiency.
    Have sufficient anti-bending strength, wear resistance, high hardness, high wear resistance and high strength.
    cutting edges, can be use for milling holes, grooves and edges on plates and the process will be smooth.
    Well polished surfaces are quite clean, neat, and there is no glitches or burrs on the shank.
    Many items or materials can be engraved such as circuit boards, metal, plastics, stainless steel and copper.
    Specifications:
    Material: Cemented carbide
    Color: Sliver
    Shank Diameter: 3.175mm / 0.125"
    Cutting Edge Diameter: 2.0mm
    Total Length: 37mm / 1.45"
    Weight: 52g(approx.)
    Package Includes:
    10pcs x End Mills
    Note:Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
  • Nincs szín - 10db 1,5 mm vágóélű maró CNC gravírozó bit 1/8 &quot szár

    1 373,00 Ft
    Description:
    This set of end mills are made from ultra-fine grain cemented carbide material which ensures good milling, cutting performance and high work efficiency. They are of high strength, hardness and wear resistance and the cutting edges are quite . There are total 10 pieces in this set which you can use for quite a long time. Fine quality, these end mills are very good for processing on many materials including plastics, , stainless steel and copper.
    Features:
    Made from ultra-fine grain cemented carbide material with good milling, cutting performance, ensuring high work efficiency.
    Have sufficient anti-bending strength, wear resistance, high hardness, high wear resistance and high strength.
    cutting edges, can be use for milling holes, grooves and edges on plates and the process will be .
    Well polished surfaces are quite , neat, and there is no glitches or burrs on the shank.
    Many items or materials can be engraved such as circuit boards, plastics, stainless steel and copper.
    Specifications:
    Material: Cemented carbide(tungsten coated)
    Color: Gold(cutting edge) & Sliver(shank)
    Shank Diameter: 3.175mm / 0.125"
    Cutting Edge Diameter: 1.5mm / 0.06"
    Length: 38mm / 1.49"
    Quantity: 10
    Package Includes:
    10 x End Mills
  • Nincs szín - 180KG / 450KG billenő bilincs vas horganyzott, gyorsan rögzített billenő bilincs függőleges bilincs

    1 393,00 Ft
    Features:
    100% brand new and high quality.
    During clamping, the lever is controlled to prevent impact on functioning due to side thrust.
    Suitable for quickly holding down sheet metal or circuit boards.
    Easy, safe and comfortable operation.
    Widely used on during welding processing, riveting processing and other processing of fixture products.
    Specification:Material: Galvanized iron
    Chucking Power: 180kg
    Style: Vertical type
    Thickness:
    -101-E & -101-D: 3mm/0.1inch
    -101-H: 4mm/0.2inch
    Fixed hole spacing:
    -101-E & -101-D: 19mm/0.7inch & 31mm/1.2inch
    -101-H: 43mm/1.7inch & 10mm/0.4inch
    Fixed hole diameter:
    -101-E & -101-D: 6.3mm/0.2inch
    -101-H: 8mm/0.3inch
    Model
    (Optional)
    Chucking Power
    Clamp Arm Screw
    Clamp Arm length
    Clamp Arm Height
    Overall Height
    Width
    Weight
    -101-E
    180kg
    M8mm
    104mm/4.1inch
    36mm/1.4inch
    150mm/5.9inch
    14.5mm/0.6inch
    384g/13.5oz
    -101-D
    180kg
    M8mm
    51mm/2inch
    36mm/1.4inch
    150mm/5.9inch
    9.5mm/0.4inch
    353g/12.5oz
    -101-H
    450kg
    M12*110mm
    120mm/4.7inch
    60mm/2.4inch
    270mm/10.6inch
    200mm/7.8inch
    1249/44.1oz
    Package List:1 x Toggle Clamp
    Note:Please allow slight error due to manual measurement. Thanks for your understanding.
  • Nincs szín - 10db 0.5-1.4mm végmaró gravírozó bit vágó 1/8 &quot szár

    1 395,00 Ft
    Features:
    Made from tungsten carbide steel with good milling, cutting performance, ensuring high work efficiency.
    Have sufficient anti-bending strength, wear resistance, high hardness, high wear resistance and high strength.
    cutting edges, can be use for milling holes, grooves and edges on plates and the process will be .
    Well polished surfaces are quite , neat, and there is no glitches or burrs on the shank.
    Many items or materials can be engraved such as circuit boards, plastics, copper, etc.
    Specifications:
    Material: Cemented carbide steel
    Cutting Edge Diameter
    Cutting Edge Length
    0.5mm
    1.8mm
    0.6mm
    1.8mm
    0.7mm
    2.7mm
    0.8mm
    3.5mm
    0.9mm
    4.5mm
    1.0mm
    5.5mm
    1.1mm
    6.0mm
    1.2mm
    7mm
    1.3mm
    8mm
    1.4mm
    8mm
    Shank Diameter: 3.175mm(1/8in)
    Total Length: 38±0.1mm
    Package Includes:
    10 x End Mills
    Note: The color of stopper is random, please take the real one as standard.
  • Nincs szín - MTA2-B18 fúrótokmány-arbor adapter HRC-55 fúrótokmány csatlakozó tengely rúd Morse

    1 421,00 Ft
    Feature:1. Drill chuck connecting rod is manufactured by 45# steel, which is durable for long service life.
    2. Such connecting shaft rod is with high accuracy and high hardness, and it is with high performance.
    3. Easy to disassemble, the drill chuck arbor can be connected to the machine tool by connecting the taper hole drill chuck.
    4. Via craft by many experts, such a connecting shaft rod is entitled with high performance according to strict rule.
    5. Moreover, drill chuck arbor is mainly used for drilling, turning and milling, which is practical.
    Specification:
    Item Type: Drill chuck connecting rod
    Hardness: HRC-55
    Material: 45# steel
    Accuracy: ≤0.003
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
    Package List:1 x Connecting Rod
  • Nincs szín - Fúrórúd CNC fúrórúd Nagy keménységű CNC-eszterga CNC-szerszámgéphez

    1 429,00 Ft
    Feature:1. Made of Cemented Carbide material, not easy to damage, corrosion and high hardness
    2. With high accuracy, high clamping stability and stable working performance
    3. The model is clearly expressed, the first number represents the diameter of the product, and the second number represents the diameter of the clamping tool
    4. Great workmanship, this boring bar can perfect replacement for the old one
    5. Widely used, widely used in SHB boring bar of CNC machine tool lathe
    Specification:
    Item Type: Lathe Turning Tool Boring Bar
    Material: Cemented carbide
    Purpose: High accuracy lathe inner diameter tool holder/small diameter CNC special tool holder
    Product Diameter: Approx. 16mm / 0.6in
    Clamping Tool Diameter: Approx. 8mm / 0.3in
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
    Package List:1 x Lathe Turning Tool Boring Bar
  • Nincs szín - Nagy keménységű hosszabbító rúd tokmány eszterga rúd csavaranyákhoz

    1 457,00 Ft
    Description:Straight shank type extended handle, the handle body longer apply deep processing, solving the need to extend the depth of processing. You can reduce the use of extension tools, which can reduce costs and improve efficiency. Excellent level products, prices are more affordable.
    Features:
    The chuck is made of quality metal material, high hardness, strong and durable.
    Great processing and fine making.
    Suitable for milling machine to improve the hardness and endurance of the .
    C8-ER11A-100L (including nuts) Straight Collet Chuck CNC Milling lathe collet.
    A good replacement part for your old one.
    Specifications:Condition: 100% Brand New
    Material: Metal
    Type: C8-ER11A-100L (including nuts)
    Clamp Handle Outer Thread Diameter: 8mm
    Designed with collet Model: ER11 (folder knife range: 1mm-7mm)
    Rod Length: Approx. 12.1cm / 4.8inch
    Package Weight: 90g
    Usage
    1: First clip the headgear into the nut, then tighten directly, holding strong.
    2: Straight shank type extended handle, the handle body longer apply deep processing, solving the need to extend the depth of processing.
    3: You can reduce the use of extension tools, which can reduce costs and improve efficiency.
    4: Extension rod diameter, and the other parts are grinding, can eliminate unbalance, increased safety when cutting.
    Package Included:1 x Chuck
  • Nincs szín - 2db HSS végmaró fém vágó metszet 6mm 4 furatos maró bit CNC eszköz

    1 473,00 Ft
    Features:
    Adopted of high quality carbide tips, exquisite workmanship, durable in use.
    Easy to use, not easy to rust.
    Suitable for processing of ordinary steel and ordinary stainless steel, such as 45 steel, A3 steel, stainless steel 201, 304 and other soft material.
    This set includes 10 pcs carbide inserts, so it provides convenience to replace the broken one.
    Good chemical stability, heat resistance, good wear resistance, high hardness.
    Specifications:
    Model: CCMT09T304 VP15TF
    Material: carbide
    Size: 14x 9 x 4mm/0.55 x 0.35 x 0.16inch (1-3mm error)
    Color: purple bronze
    Quantity: 10 PCS
    Blade description:
    C = blade shape, C is 80 degrees
    C = clearance angle is 7 degrees(with clearance angle is single blade)
    M = blade tolerance(You can ignore it)
    T = of the hole slot(You can ignore it)
    09 = cutting edge is 9mm
    T3= the blade thickness is 3.97 mm
    04 = R degrees of Angle (02 = R0.2, 04 = R0.4, 08 = R0.8)
    VP15TF = processing material
    Packaging: plastic box(yellow, red, blue random)
    Package Included:
    10 x CNC Carbide Tips Inserts
  • Nincs szín - Vágóbetétek Marómaró maró Vágószerszám rozsdamentes acél rézhez

    1 486,00 Ft
    Description:
    This set of end mills are made from ultra-fine grain cemented carbide material which ensures good milling, cutting performance and high work efficiency. They are of high strength, hardness and wear resistance and the cutting edges are quite . There are total 10 pieces in this set which you can use for quite a long time and they are all packed and assorted in a plastic box for easy storage. Fine quality, these end mills are very good for processing on many materials including plastics, PCB and metal.
    Features:
    Made from ultra-fine grain cemented carbide material with good milling, cutting performance, ensuring high work efficiency.
    Have sufficient anti-bending strength, wear resistance, high hardness, high wear resistance and high strength.
    cutting edges, can be use for milling holes, grooves and edges on plates and the process will be smooth.
    Well polished surfaces are quite clean, neat, and there is no glitches or burrs on the shank.
    Many items or materials can be engraved such as circuit boards, metal, plastics, stainless steel and copper.
    Specifications:
    Material: Cemented carbide(titanium coated)
    Color: Gold(cutting edge) & Sliver(shank)
    Shank Diameter: 3.175mm / 0.125"
    Cutting Edge Diameter: 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm(2pcs each size)
    Total Length: 37mm / 1.45"
    Weight: 53g(approx.)
    Package Includes:
    10pcs x End Mills
    Note:Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
  • Nincs szín - Kardántengely tengelykapcsoló motor csatlakozó barkács kormánymű kardántengely

    1 488,00 Ft
    Features:
    100% brand new and high quality.
    This joint or coupling connects rigid rods whose axes are inclined to each other.
    Made of premium metal material, it is durable and has long service life.
    It is commonly used for shafts that transmit rotary motion.
    Widely used for connecting model , model ships, robots, etc.
    Specification:
    Material: Metal
    Inner Diameter: 12mm / 0.5in
    Outer Diameter: 24mm / 0.9in
    Length: 56mm / 2.2in
    Weight: 129g / 4.6oz (approx.)
    Package list:
    1 * Universal Joint
    2 * Screws
  • Nincs szín - Fúró rúd nagy keménységű CNC fúró rúd CNC eszterga CNC szerszámgéphez

    1 520,00 Ft
    Boring Bar High Hardness CNC Boring Bar CNC Machine Lathe for CNC Machine Tool
    Feature:1. Made of Cemented Carbide material, not easy to damage, corrosion and high hardness
    2. High accuracy, high clamping stability, stable working performance
    3. The model is clearly expressed, the first number represents the diameter of the product, and the second number represents the diameter of the clamping tool
    4. Great workmanship, this boring bar can perfect replacement for the old one
    5. With small size, easy to carry and store, convenient to use and very practicality
    Specification:
    Item Type: Lathe Turning Tool Boring Bar
    Material: Cemented carbide
    Purpose: High accuracy lathe inner diameter tool /small diameter CNC special tool
    Product Diameter: Approx. 16mm / 0.6in
    Clamping Tool Diameter: Approx. 10mm / 0.4in
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
    Package List:1 x Lathe Turning Tool Boring Bar
  • Nincs szín - 1 méteres R18 fekete nylon kábel húzólánc kábeltartó 3D nyomtató CNC géphez

    1 537,00 Ft
    Features:
    1. Due to the small spacing, the operation is particularly quiet and the noise is low.
    2. High wear resistance, high temperature resistance, salt resistance, acid resistance and alkali resistance
    3.Strong structure, not easy to deform
    4. Heavy load and long service life
    5. Fast moving speed, very suitable for short distance light bearing condition
    6. Widely used in printers, CNC machine tools, electronic equipment, fire fighting machinery, stone machinery, glass machinery, door and window machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses, etc.
    Specification:
    Condition: 100% Brand New
    Item Type: Cable Drag Chain
    Material: Reinforced Nylon PA66
    Color: Black
    Inner Height x Inner Width: Approx. 10 x 20mm / 0.4 x 0.8in
    External Height x External Width: Approx. 15 x 27mm / 0.6 x 1.1in
    Length: Approx. 100cm / 39.4in
    Bending Radius: R18
    Opening Method: Integrated
    Temperature Resistance: -25~100°C
    Package List:
    1 x Cable Drag Chain
    Note:
    1. Please allow slight error due to manual measurement. Thanks for your understanding.
    2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
  • Nincs szín - Esztergagép szerszámkészlet SRACR1212H06 Acél ARC CNC esztergavágó szerszámtartó

    1 537,00 Ft
    Feature:
    The product is made of high quality steel with high hardness, wear resistance and low loss.
    The red wrench is used for opening and locking the center of the blade. It is compact and delicate, convenient and practical.
    The product is easy to install and maintain.
    Products are widely used in CNC lathes.
    The product adopts screw pressure clamp structure, which has simple structure, tight clamping blade and is not easy to loosen.
    Specification:
    Model: SRACR1212H06
    Material: Steel
    Package list:1 * Wrench
    1 * Tool Holder(without blade)
    Note:The actual product color may deviate from the photo due to light.
    There may be a slight deviation in the measurement of product.
  • Nincs szín - Fúró rúd nagy keménységű CNC fúró rúd CNC eszterga CNC szerszámgéphez

    1 548,00 Ft
    Boring Bar High Hardness CNC Boring Bar CNC Machine Lathe for CNC Machine Tool
    Feature:1. Made of high quality tungsten steel, not easy to damage or corrosion with high hardness
    2. Possess high accuracy and high clamping stability enabling stable work
    3. The model is clearly expressed, the first number represents diameter of product, and the second number represents diameter of clamping tool
    4. Used for high‑accuracy lathe inner diameter boring bar and small diameter CNC special boring bar
    5. All working parts through fine grinding, which bring smooth surface
    Specification:
    Item Type: Boring bar
    Material: Tungsten steel
    Usage: High-accuracy lathe inner diameter boring bar/small diameter CNC special boring bar
    Product Diameter: Approx. 16mm / 0.6in
    Clamping Tool Diameter: Approx. 7mm / 0.3in
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
    Package List:1 x Boring Bar
  • Nincs szín - Unalmas rúd CNC fúró rúd volfrámacél fúrógép szorító eszközhöz

    1 553,00 Ft
    Feature:1. Made of high quality tungsten steel, not easy to damage or corrosion with high hardness
    2. Possess high accuracy and high clamping stability enabling stable work
    3. The model is clearly expressed, the first number represents diameter of product, and the second number represents diameter of clamping tool
    4. Used for high‑accuracy lathe inner diameter boring bar and small diameter CNC special boring bar
    5. All working parts through fine grinding, which bring surface
    Specification:
    Item Type: Boring bar
    Material: Tungsten steel
    Usage: High-accuracy lathe inner diameter boring bar/small diameter CNC special boring bar
    Product Diameter: Approx. 16mm / 0.6in
    Clamping Tool Diameter: Approx. 4mm / 0.2in
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
    Package List:1 x Boring Bar
  • Nincs szín - Kopásálló gyémánt vágószerszám betét Gyémánt vágó szerszám betét CNC eszterga

    1 559,00 Ft
    Features:
    1. 100% brand new and high quality.
    2. Incisive cutting edges for super thin cutting and machining.
    3. Wear resistant and anti-impact, with longer service life than alloy or ceramic cutter tool.
    4. Selection of high quality diamond material, through seamless welding process, zoom in 300 times to inspect every product.
    5. Suitable for non-ferrous metals such as aluminum alloy, copper and their alloys, , and nonmetals like glass fibers, carbon fiber, reinforced plastics, etc.
    Specification:
    Material: Diamond
    Coating: Uncoated
    Function: End face, inner bore, outer circle, step machining
    Heat Resistance: 700-800℃
    Compressive Strength: 600-1100MPa
    Toughness: 9.0MPa.m1/2
    Hardness: 8000hv
    Thermal Conductivity: 700W/(M.K)
    Thermal Expansion Coefficient: 0.9-118 10-6/K
    Weight: 16g (approx.)
    Package List:
    1 * CNC Diamond Insert
  • Nincs szín - Fúróvágó rúd stabil CNC-fúró rúdlyuk-vágó a belső lyuk esztergálásához

    1 563,00 Ft
    Boring Cutter Bar Stable CNC Boring Bar Hole Cutter for Turning Internal Hole
    Feature:1. Made of high quality tungsten steel, not easy to damage or corrosion with high hardness
    2. Possess high accuracy and high clamping stability enabling stable work
    3. The model is clearly expressed, the first number represents diameter of product, and the second number represents diameter of clamping tool
    4. Used for high‑accuracy lathe inner diameter boring bar and small diameter CNC special boring bar
    5. All working parts through fine grinding, which bring smooth surface
    Specification:
    Item Type: Boring bar
    Material: Tungsten steel
    Usage: High-accuracy lathe inner diameter boring bar/small diameter CNC special boring bar
    Product Diameter: Approx. 16mm / 0.6in
    Clamping Tool Diameter: Approx. 3mm / 0.1in
    .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
    Package List:1 x Boring Bar
  • Nincs szín - 180 kg-os kapcsolókapocs, rozsdamentes acélból, gyorsjavítással

    1 568,00 Ft
    Features:
    100% brand new and high quality.
    During clamping, the lever is controlled to prevent impact on functioning due to side thrust.
    Suitable for quickly holding down sheet metal or circuit boards.
    Easy, safe and comfortable operation.
    Widely used on during welding processing, riveting processing and other processing of fixture products.
    Specification:Material: Galvanized iron
    Weight: 268g/9.5oz
    Model: GH-8451
    Chucking Power: 180kg
    Thickness: 3mm/0.1inch
    Fixed hole spacing: 19mm/0.7inch & 34.9mm/1.4inch
    Base Length: 49.2mm/1.9inch
    Base Width: 38mm/1.5inch
    Drag Hook Diameter: 8mm/0.3inch
    Screw Tooth Length: 55mm/2.2inch
    Overall Length: 230mm/9.1inch
    Package List:1 x Toggle Clamp
    Note:Please allow slight error due to manual measurement. Thanks for your understanding.
  • Nincs szín - Motor tengely 8 mm magas meghosszabbító rúd tokmány tokmány motor tengely ER16 szerszám gravírozás

    1 581,00 Ft
    Features:
    1. ER straight-type chuck extension handle has long handle, suitable for deep hole processing.
    2. This can reduce the use of tools, reduce costs and increase efficiency
    3. Accuracy grinding can eliminate the outer diameter of the rod and the imbalance of the rod and improve the stability of the cutting.
    4. Great workmanship, perfect replacement for the old or broken one.
    5. It is a special shaft for motor spindle, easy to install
    Specification:
    Condition: 100% Brand new
    Whole Size: Approx. 8 x 18 x 45mm / 0.3 x 0.7 x 1.8in
    Outer Diameter: Approx. 18mm / 0.7in
    Size: Approx. 13 x 18mm / 0.5 x 0.7in
    Package List:
    1 x Motor Shaft
  • Nincs szín - M8 * 63 marógép fogantyú forgó fogantyú menetmaró géphez

    1 598,00 Ft
    Features:1. High quality material ensures stable performance and durability.
    2. Easy and convenient to install and remove.
    3. Nice replacement accessory for the old or broken one.
    4. Suitable for thread milling machine, lathe or grinding machine.
    5. Sturdy and durable, high temperature resistant, not easy to deform.
    Specification:Item Type: Revolving Handle
    Material:
    Color:
    Type: M8 * 63
    Quantity: 5Pcs
    Item Size: 8 * 5 * 2cm / 3.1 * 2.0 * 0.8inch
    Package Weight: Approx. 171g
    Package List:5 * Revolving Handles