Fúróeszközök

Features:
1. Made of high quality steel material, durable to use.
2. One tool with 4 key sizes for tightening and loosening chuck
3. This 4 way universal chuck can perfect replacement for lost or damaged chuck keys
4. Light weight and it is convenient to use.
5. Suitable for most drills and power tools
Specification:
Condition: 100% Brand New
Material: 45# Steel
Weight: Approx. 52g / 1.8oz
Size: Approx. 74 * 38mm / 2.9 * 1.5in
Outer Length: Approx. 13mm / 0.5in
Inter Length: Approx. 7.4mm / 0.3in
Package List:
1 * 4 in 1 Drills Chuck Key

Features:
100% brand new and high quality.
Keyless drill chuck for mini power drill, electric grinder.
0.3-3.4mm clamping capacity, easily clamp different size of drill bits.
Easily locks onto and releases drill bits.
Clamp drill bits securely, not easy to fall off.
Specification:
Clamping Range: 0.3-3.4mm
Driver Shank: 2.35mm Round Shank
Package list:
1 * Drill Chuck

Features:
100% brand new and high quality.
Keyless drill chuck for mini power drill, electric grinder.
0.3-3.6mm clamping capacity, easily clamp different size of drill bits.
Easily locks onto and releases drill bits.
Allows hex drive power drill to use conventional drill bits.
Specification:
Clamping Capacity: 0.3-3.6mm
Driver Shank: 1/4"(6.35mm) Hex Shank
Package list:
1 * Drill Chuck

Features:
100% brand new and high quality.
Keyless drill chuck for mini power drill, electric grinder.
0.3-6.5mm clamping capacity, easily clamp different size of drill bits.
Easily locks onto and releases drill bits.
Allows hex drive power drill to use conventional drill bits.
Specification:
Clamping Range: 0.3-6.5mm
Driver Shank: 1/4" hex shank
Package list:
1 * Drill Chuck

Features:1. Easy and quick to change accessories replacement on multi tool without changing collets.
2. Suitable for most power tools such as electric drill, grinder, screwdriver.
3. Use this chuck to convert any cordless driver or impact driver into a drill or a mill.
4. Unlimited used in car, garages, warehouses, offices, homes, etc.
5. Suitable for electric grinders with spindles of 7mm or 8mm.
Specification:Condition: 100% Brand New
Item Name: Drill Collet
Clamping Range: 0.5-3.2mm
Total Length: Approx. 20mm / 0.8in
Thread Diameter: Approx. 7mm / 0.3in
Type: Short-tail, Long-tail (optional)
Application: Suitable for electric grinders with spindles of 7mm or 8mm. Not this size can not be used.
Package List:1 * Drill Collet
Note:1. If the casing between the nose and the output shaft is hollow, the length of the output shaft protruding outside must be greater than 10 mm.
2. If the casing and the output shaft of the nose are nearly and solid, the length of the output shaft protruding outside must be greater than 13 mm.
3. On a small flexible shaft, the hollow portion between the head of the flexible shaft handle and the output shaft must be larger than 13.8 mm (some small soft shafts on the market are not compatible, please pay attention when purchasing.)

Description:
This is a drill chuck with capacity of 0.3mm to 3.4mm, used to hold drill bits or other tools. It has three jaws that are arranged in a symmetrical pattern that are mean to be tightened up to hold the tool. It can be widely used to many electric drills, cordless drills, etc with a 1/8" spindle. Easy to replace your defective chuck with this replacement or upgrade you chuck.
Features:
Made from high quality brass and aluminum alloy for durability and long service life.
Three-jaw head design chuck with a wide grasp capacity from 0.3mm to 3.4mm.
Universal 1/8 inch chuck can be connected to many electric drills, cordless drills, etc.
Comes with a handy hex key wrench that you can use to tighten or loosen conveniently.
This drill chuck would be a great replacement for your old or broken one.
Specifications:
Material: Brass, aluminum alloy
Brass ID: 3.17mm(1/8")
Brass Length: 24mm(0.94")
Black Length: 19mm(0.75")
Hex Key Length: 46mm(1.81")
Grasp Capacity: 0.3-3.4mm
Package Includes:
1 x Chuck
1 x Hex Key

Features:
The step drill bit is made from high speed steel of high hardness and good wear resistance.
is coated with which give the drill bit a beautiful gold color and will not fade easily.
This single drill bit can be used for drilling a wide range of hole sizes from 4mm to 20mm.
It is most commonly used on softer materials such as thin iron sheet, aluminum, PVC and wood board of 4mm or .
Step drill is great for use in work where thin steel, aluminum or plastic boxes and chassis are encountered.
Specifications:
Material: High speed steel
Finishing: coating
Step Size: 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm
Hex Shank: 1/4"
Quantity: 1pc
Package Includes:
1 x Step Drill Bit

Features:
1. Cast by high quality metal, wear resistant and anti-impact.
2. Polishing surface features anti-oxidative, waterproof and anti-corrosion.
3. Fine workmanship ensures its stable performance and long service life.
4. Equipped with chuck key to adjust the chuck to proper tightness.
5. Easy to use, applicable for drill machine, electric drill, etc.
Specification:
Material: Stainless steel
Item Type: Electric drill chuck
Clamp Range: 0.6-6mm
Mount Hole: 10mm taper (B10), 3/8-24UNF thread (3/8-24UNF) (Optional)
Drill Chuck Size: Height: 4cm/1.57in, hole diameter: 1cm/0.39in
Chuck Key Size: 5.5*3.3cm / 2.16*1.30in
Weight: Approx. 126-128g / 4.4-4.5oz
Package list:
1 * Drill Chuck
1 * Chuck Key

Features:
Cast by high quality stainless steel, anti-impact and anti-corrosion.
The clamping jaws are specially treated to improve wear resistance.
Fine workmanship ensures its stable performance and long service life.
Equipped with chuck key to adjust the chuck to proper tightness.
Easy to mount, applicable to electric drill, electric grinder, etc.
Specification:
Clamping range: 0.3-4mm
Connection size: JT0
Package list:
1 * Drill Chuck
1 * Key

Feature:1. Made of high quality diamond material with high hardness and durability
2. Strong hole opening performance, fast drilling speed, smoothly and seamless
3. Adopt high‑quality brazing technology, smoothly opening without broken edges, no vibration
4. Suitable for drilling holes in marble, concrete, granite, tiles, glass, etc.
5. Small size, easy to carry and store, convenient to use and with good performance
Specification:
Item Type: Diamond Hole Saw Drill Bit
Color: Blue
Material: Diamond
Size: Approx. 83 x 25mm / 3.3 x 1in
Maximum Opening: Approx. 25mm / 1in
Uses: Suitable for drilling marble, concrete, granite, ceramic tiles, glass, etc.
Size: Approx.25mm / 1in, 58mm / 2.3in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Diamond Hole Saw Drill Bit
Note:Manual measurement, due to manual weight measurement, please allow 1‑3mm error. Thank you for your understanding.

Feature:1. Durable for long service life, it is made of 45# steel, which can be used with confidence.
2. Due to high performance, accuracy and high hardness, this kind of steel connecting shaft rod.
3. With great popularity, such kind of MT taper shank is easy to use in the practical life.
4. For easy disassembly, drill chuck connecting rod can be connected to the machine tool via connecting the taper hole drill chuck.
5. Applicated for drilling, turning and milling, the drill chuck shank can be used by simple operation.
Specification:
Item Type: Drill chuck connecting rod
Hardness: HRC-55
Material: 45# steel
Accuracy: ≤0.003
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Connecting Rod

Feature:1. Given that this kind of steel connecting shaft rod is with high performance, accuracy and high hardness.
2. Easy to use in the practical life, which makes such CNC tool getting great popularity.
3. For easy disassembly, drill chuck connecting rod can be connected to the machine tool via connecting the taper hole drill chuck.
4. Practical, such MT taper shank is is mainly used for drilling, turning and milling.
5. Durable for long service life, this CNC tool is made of 45# steel, which can be used with confidence.
Specification:
Item Type: Drill chuck connecting rod
Hardness: HRC-55
Material: 45# steel
Accuracy: ≤0.003
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Connecting Rod

Features:
1. Cast by high quality metal, wear resistant and anti-impact.
2. Polishing surface features anti-oxidative, waterproof and anti-corrosion.
3. Fine and strict workmanship ensures its long service life.
4. Equipped with chuck key to adjust the chuck for proper tightness.
5. Applicable for lathe, electric drill, milling machine, etc.
Specification:
Material: Metal
Color: Shown ad pictures
Clamping Range: 0.3-4mm
Outer Diameter: 21.5mm/0.85in
Brass Base Size: Length: 20mm/0.79in, Hole Diameter: 3.175mm/0.13in
Weight: 72g/2.5oz
Package list:
1 * JTO Chuck
1 * Chuck Key
1 * Brass Base
1 * Small Wrench
Note: Please allow slight error due to manual measurement. Thanks for your understanding.

Features:
High- thread and tapered holes can be tightly attached to the tool.
The housing is treated with electrophoretic paint, making the product anti-rust even in worst environment.
By using anti-thrust bearing to convert key-applied into superior gripping.
The clamping jaws are specially treated to improve wear resistance.
Enjoying super and durability.
0.6-6mm B10: 0.6-6mm denotes that clamp the drill between 0.6 and 6mm, and B10 represents the hole behind the chuck is about 16MM taper.
Specification:
Condition: 100% Brand New
Material: Stainless steel
Clamping range: 0.6-6mm / 0.02-0.24in
Package list:
1 * Drill Chuck
1 * Key

Feature:1. Product purpose: through the connection of taper hole drill chuck, so as to make the connection with the machine tool, with flat after easy to disassemble from the machine tool.
2. HRC-55 hardness 45# steel material, not easy to rust, wear resistant, long service life.
3. Can be adapted to a variety of drilling machines, milling machines,lathes and so on.
4. High strength, impact resistant, durable in use.
5. The adapter will make your work more convenient and labor-saving.
Specification:
Item Type: Morse Taper Drill Chuck Arbor
Model: MTB2-B12
Hardness: HRC-55
Material: 45# steel
Accuracy: ≤0.003
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 X Morse Taper Drill Chuck Arbor

Feature:1. MTB2-B16 Morse Taper Drill Chuck Arbor. Through the connection of taper hole drill chuck, so that the connection with the machine tool, with flat after easy to disassemble from the machine tool.
2. HRC-55 hardness 45# steel material. High strength, impact resistant, durable in use.
3. High ≤0.003. High concentricity when working with the corresponding drill chuck.
4. Once forming without burrs, operation.
5. Professional designed, beautiful appearance, easy to use.
Specification:
Item Type: Morse Taper Drill Chuck Arbor
Model: MTB2-B16
Hardness: HRC-55
Material: 45# steel
Accuracy: ≤0.003
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 X Morse Taper Drill Chuck Arbor

Features:
1. Cast by high quality metal, wear resistant and anti-impact.
2. Polishing surface features anti-oxidative, waterproof and anti-corrosion.
3. Fine workmanship ensures its stable performance and long service life.
4. Equipped with chuck key to adjust the chuck to proper tightness.
5. Easy to mount, applicable for drill machine, electric drill, etc.
Specification:
Material: Stainless steel
Item Type: Electric drill chuck
Clamp Range: 1.0-10mm
Mount Hole: 12mm taper (B12), 3/8-24UNF thread (3/8-24UNF) (Optional)
Drill Chuck Size: Height: 4.5cm/1.77in, hole diameter: 1.2cm/0.47in
Chuck Key Size: 5.5*3.4cm / 2.16*1.34in
Weight: Approx. 178g/6.3oz
Package list:
1 * Drill Chuck
1 * Chuck Key

Feature:1. The set including 4 kinds of drill chuck adapter to meet your various needs.
2. High speed steel material ,durable and of high strength.
3. The screw is fine processed,these adapter can be safely used.
4. Each adapter is well made of high quality and great durability.
5. These adapter will make your work more convenient and labor-saving.
Specification:
Item Type:Drill Chuck Connector
Material:High Speed Steel
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:
1 Pcs 1/4in Hex Shank 3/8-24UNF Thread Adapter
1 Pcs 1/4in Hex Shank 1/2-20UNF Thread Adapter
1 Pcs 1/2 Round Shank SDS1/2-20UNF Thread Adapter
1 Pcs 1/2 Shank SDS1/2-20UNF Thread Adapter

Features:
High accuracy threaded and tapered tightly mounts on the tools.
The chuck can be protected from rusting for -coated body and good appearance with electrophoretic enamelling.
By using anti-thrust bearing to convert key-applied torsion into superior gripping and anti bounce force.
The jaws was specially treated for better wear resistance.
It is stable and has great performance while using.
Specification:Clamp Size:1.5 ~ 10mm / 0.06 ~ 0.39in
Mount:3/8-24UNF
Size:As shown in the picture.
Package List:1*Drill Chuck

Features:1. High accurate threaded and tapered tightly mounts on the tools.
2. It can be protected form rusting for -coated body and good appearance with sleeve electrophoretic enameling.
3. By using anti-thrust bearing to convert key-applied torsion into superior gripping and anti bounce force.
4. Jaws are specifically engineered for tight tolerance production drilling.
5. It is stable and has great performance while using.
Specification:Condition: 100% Brand New
Item Type: Drill Chuck
Clamp Size: 1.5 ~ 10mm / 0.06 ~ 0.39in
Mount: 3/8-24UNF
Size: As shown in the picture.
Package List:1 * Drill Chuck 1.5-10mm 3/8-24UNF
1 * 1/4 Hex Head 3/8 Thread Extension Rod
1 * Chuck Wrench
Note:1. Please allow slight error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Features:1. Comfortable of sleeve and positive gripping can apply more output moment of force.
2. By using anti-thrust bearing to convert hand-applied moment of force into superior gripping force.
3. Aesthetic and practical design of make sure the front and rear sleeve cooperate with each other more effective and reduce the run out of sleeve.
4. Unique structure, can very good clamp bit head.
5. The clamping range of chuck is 0.8-10mm.
Specification:Condition: 100% Brand New
Item Type: Drill Chuck
Material: Plastic
Clamping Range: 0.8-10 mm
Connection Thread: 3/8-24UNF
Package List:1 * Drill Chuck 0.8-10mm 3/8-24UNF
1 * 1/4 Hex Head 3/8 Thread Extension Rod
Note:1. Please allow slight error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Features:
The fine is smooth and unblemished.
It is stable and has great performance while using.
Easy to operate, convenient to use, and quick to punch.
High suitable for high lathe processing.
High quality manganese steel forged by heat treatment, high hardness.
Specifications:
Condition:100% Brand New
Material: Manganese steel
Color: As shown in the picture
Morse No. 2 maximum Outside Diameter: 17.78mm/0.7in Taper 1:20.020
Maximum Outside Diameter of Short Head: 21.793mm/0.86in Taper No. : B22
B22 for Drilling Chuck: 5-20mm Drill Chuck
Package List:
1*Morse Taper Shank
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Plastic Housing 1 / 2-20UNF Thread 2.0mm-13mm Without Key Chuck For Electric
Feature:
Comfortable of sleeve and positive gripping can apply more output .
By using anti-thrust bearing to convert hand-applied into superior gripping force.
Aesthetic and practical design of make sure the front and rear sleeve cooperate with each other more effective and reduce the run out of sleeve.
Unique structure, can very good clamp bit head
The clamping range of chuck is 2.0-13mm.
Specification:Material: ABS
Clamping range: 2.0-13 mm
Connection thread: 1/2-20UNF
Package list:1 * Keyless Chuck
Note:The actual product color may deviate from the photo due to light.
There may be a slight deviation in the measurement of product.

Feature:1. Product use: By connecting the taper hole drill chuck, so as to connect with the machine tool, and the flat position is convenient for disassembly from the machine tool.
2. High concentricity when working with the corresponding drill chuck.
3. Can be adapted to a variety of drilling machines, milling machines,lathes and so on.
4. HRC-55 hardness 45# steel material, not easy to rust, wear resistant, long service life.
5. Professional designed, beautiful appearance, easy to use.
Specification:
Item Type: Morse Taper Drill Chuck Arbor
Model: MTB3-B16
Hardness: HRC-55
Material: 45 # steel
Accuracy: ≤0.003
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 X Drill Chuck Arbor

Feature:1. After each product is processed, has been refined for many times, and the optimal finish ensures that the accuracy of the processing is easier.
2. The product undergoes overall quenching treatment, with higher hardness and wear resistance
3. Each product leaves the factory through strict testing and rejects defective products
4. Great workmanship, perfect replacement for the old one
5. Using high‑quality materials, strong and durable, has a long service life
Specification:Item Type: Taper Reducing Adapter Drill Sleeve
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Material: High speed steel
Model: MT3 to MT1
Package List:1 x Taper Reducing Adapter Drill Sleeve

Feature:1. Product purpose: through the connection of taper hole drill chuck, so as to make the connection with the machine tool, with flat after easy to disassemble from the machine tool.
2. Can be adapted to a variety of drilling machines, milling machines,lathes and so on.
3. HRC-55 hardness, High strength, impact resistant, durable in use.
4. One-piece molding without burrs, operation.
5. Professional designed, beautiful appearance, easy to use.
Specification:
Item Type: Morse Taper Drill Chuck Arbor
Model: MTB3-B18
Hardness: HRC-55
Material: 45 # steel
Accuracy: ≤0.003
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 X Drill Chuck Arbor

Durable Drill Chuck Connecting Rod Drill Chuck Arbor Lathe for Milling Machine
Feature:1. Through the connection of taper hole drill chuck, so that the connection with the machine tool, with flat after easy to disassemble from the machine tool.
2. High concentricity when working with the corresponding drill chuck.
3. HRC-55 hardness, 45# steel material, not easy to rust, wear resistant, long service life.
4. The adapter will make your work more convenient and labor-saving.
5. One-piece molding without burrs, smooth operation.
Specification:
Item Type: Morse Taper Drill Chuck Arbor
Hardness: HRC-55
Material: 45 # steel
Accuracy: ≤0.003
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Morse Taper Drill Chuck Arbor

Features:
Made of high quality steel, wear- resistance, long service life.
Excellent clamping force, accurate and reliable.
Unique thrust bearing design, easy to clamp.
High accuracy, greatly improve your operating efficiency.
Suitable for AC & DC electric drill that power less than 700W.
Specification:Material: Steel
Weight: 274g/9.7oz
Clamping range: 2-13mm (1/16-1/2inch)
Connection : 1/2-20UNF
Package List:1* Drill Chuck with Round Connecting Shank

Feature:
1. Comfortable of sleeve and positive gripping can apply more output torsion.
2. By using special anti-thrust bearing to convert hand-applied torsion into superior gripping force.
3. Aesthetic and practical design of make sure the front and rear sleeve cooperate with each other more effective and reduce the run out of sleeve.
4. Unique structure, can very good clamp bit head
5. The clamping range of chuck is 2.0-13mm.
Specification:Material: ABS
Clamping Range: 2.0-13 mm
Connection Thread: 1/2-20UNF
Package list:1 * 2.0-13MM 1/2-20UNF Keyless Chuck
1 * 1/4 Hex Connecting Rod

Features:
This drill chuck is made of high quality plastic and -vanadium steel, high hardness, durable in use.
Good metallic and comfortable coat surface.
Jaws special treatment, with good abrasion resistance.
Keyless chuck finger-tightens for easy changes. Quick-change shank for electric hammer.
Accuracy is accurate and reliable.
Specifications:Material: Plastic (body), -vanadium steel (handle)
Shank length: 46mm / 1.81inch
Head Diameter: 6mm / 0.24inch
Hole Diameter: 12mm / 0.47inch
Capacity: 2-13mm / 0.08-0.51inch
Total Length: Approx. 12.4cm / 4.88inch
Weight: Approx. 257g
Package Included:1 x Drill Chuck
1 x Adapter
Note:
Only chuck and adapter, no other stuff included.

Features:
1. 100% brand new and high quality.
2. Provides a drill chuck adaptor to connect the drill chuck and impact wrench firmly.
3. High precision threads tight and stable connecting.
4. Fine and strict workmanship ensures its long service life.
5. Mainly used for impact wrench conversion.
Specification:
Thread Mount: 1/2"-20UNF
Chuck Adaptor Thread: 1/2"
Clamping Range: 2-13mm
Size: Shown as pictures
Package Weight: Approx. 260g/9.2oz
Package list:
1 * Drill Chuck
1 * Chuck Adaptor
Note: Please allow slight error due to manual measurement. Thanks for your understanding.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:
Made of high quality steel, wear resistance, long service life.
High thread, greatly improve your operating efficiency.
Excellent clamping force, accurate and reliable, easy to clamp.
Electroplate paint shell, can effectively prevent rusting in harsh environment.
Suitable for impact drill and AC & DC drill with different power.
Specification:Material: Steel
Weight: 369g/13oz
Package List:1* 1.5-13mm Drill Chuck

Feature:1. Long end(with handle) is 3MT, short end is 6JT.
2. Suitable for all drill chucks with 6JT drill hole and any machine with 3MT spindle.
3. This arbor is used on the lathe with tailless lathe.
4. ground and hardened, high machining accuracy.
5. Heat treated steel construction for high hardness and long durability.
Specification:
Item Type: Drill Chuck Arbor
Material: 40Cr
Length: 139mm / 5.47in: 0.01mm
Application: Lathe
Item Weight: Approx 333g
Package Weight: Approx 346g
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Drill Chuck Arbor

Features:
Made of high-quality carbon steel, it is strong, stable and resistant to corrosion.
High , high hardness, easy installation and maintenance.
Exquisite craftsmanship, long life, durable and strong impact resistance.
The connection method is MT2 flat tail connecting rod, the connection is stable and the use is safer.
Perfect for CNC lathes, with the tool for clamping the hole, the thread, the and other tools inside diameter.
Specifications:Condition: 100% Brand New
Material: carbon steel
Model: D25-MT2
Rod outer diameter: approx. 25mm / 1in
Package list:1 * Morse Taper Drill Sleeve

1.5-13mm 1/2-20UNF Key Type Drill Chuck with SDS Square Shank Adapter GS
Features:
The SDS adapter allows this drill chuck to mount on electric hammer so as to convert electric hammer into a power drill.
Classic keyed 3-jaw design securely holds a wide range of twist drills conveniently.
1.5-13mm drill chuck clamping range, 1/2-20UNF mounting threads at the back of the chuck.
By using anti-thrust bearing to convert key-applied torque into superior gripping.
The clamping jaws are specially treated to improve wear resistance.
All metal construction for long durability.
Specification:
Material: Steel
Clamping Range: 1.5-13mm
Mounting thread: 1/2-20UNF
Package list:
1 x Drill Chuck
1 x Key
1 x SDS Square Shank Adapter

Feature:
With heat treatment, the product has good toughness and higher structural strength.
The unique patent locking function breaks through the traditional locking method, with ratchets on the back.
The locking plate is installed in the back sleeve, which can prevent loosening and loosening in the work more effectively and make the clamp more reliable when holding the tool.
Good metal texture, comfortable coat .
The unique thrust bearing is easy to convert the applied by the handle into greater clamping force.
Scope of application: It is suitable for percussion drills with power above 1050W.
Specification:Product Name: 0.8-10MM all-metal hand-tightened self-locking drill chuck thread interface
Clamping range: 0.8-10 mm
Connection Size: 3/8-24UNF
Scope of application: It is suitable for percussion drills with power above 1050W.
Weight: 217g / 7.7oz
Package list:1 * Drill Chuck
Note:The actual product color may deviate from the photo due to light.
There may be a slight deviation in the measurement of product.

Feature:1. High-speed steel chuck with high load-bearing capacity, pressure resistance and explosion resistance
2. A variety of diameter sizes are available for your choice to meet your use requirements
3. Elaborate production, has a long service life and with high cost performance
4. Small size, easy to carry and store, easy to use and with good practicality
5. Strict quality control and quality assurance, high safety factor, can be used with peace of mind
Specification:
Item Type: Chuck
Model: ER11
Installation Diameter: Approx. 1/32in, 1/16in, 3/32in, 1/8in, 5/32in, 3/16in, 7/32in
Material: High speed steel
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:7 x Chuck

Features:
The chuck can hold the drill bit tightly and sturdy,not easy to loose.
Durable and has long service life,suitable for long time work.
Easy to install and disassemble,more convenient and labor-saving.
Large range of clamp size which range from 2~13mm,suitable for many kinds of drill bit.
Keyless and self-tighten type design is more in accordance with human engineering.
Specification:Diameter:43mm/1.69in
Length:71mm/2.8in
Connection Size:1/2-20UNF
Clamp Range:2 ~ 13mm / 0.04 ~ 0.51in
Package List:1*Drill Chuck

Features:
High hardness manganese steel, long hardness life, not easy to corrosion., solid and durable to use.
Good metal texture, comfortable , easy to clamp, so that the output torsion becomes larger.
Keyless design, tightening and loosening is by hand force, which offers a quicker and easier chucking and unchucking.
Beautiful and practical design of the convex and concave, so that before and after the set can effectively cope with and can reduce the shaking jacket.
Widely used with various drill machines, milling machines, lathes, boring lathes and electric hand tools.
Specifications:Condition:100% Brand New
Material: Manganese steel
Color: As shown in the picture
Connecting Rod: Taper Mohs No. 3 Maximum Diameter: Approx. 23.825mm/0.9in
Short Head Size: Taper M18 Maximum Diameter: Approx. 17.78mm/0.7in
Package List:
1*Self Tighten Drill Chuck

Feature:1. High strength drill chuck for rotary electric drill and hammer.
2. Made of high quality steel material, through polishing treatment, anti-rust and durable.
3. Come with a chuck key to adjust the drill chuck to proper tightness.
4. Simple structure, easy to install and remove.
5. Suitable for machine tools, portable bench drill and power tool.
Specification:
Item Type: Drill Chuck
Material: Steel
Clamping Range: 1.5-13mm
Accuracy: 0.18mm
Thread: 1/2-20UNF
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:
1 x Drill Chuck
1 x Chuck Key

Feature:
With heat treatment, the product has good toughness and higher structural strength.
Good metal texture, comfortable coat , easy to clamp, so that the output becomes larger.
The unique thrust bearing is easy to convert the applied by the handle into greater clamping force.
Beautiful and practical concave and convex design, so that the front and rear jackets can effectively cooperate and reduce the jacket shaking.
Scope of application: Applicable to AC electric drills with power below 700W and various DC electric drills.
Specification:Material: High Steel
Applicable machine: Impact drill
Specification: 2-13mm 1/2-20UNF
Hand-clamped drill chuck: all-metal self-locking 13mm drill chuck
Scope of application: Applicable to AC electric drills and DC electric drills with power below 700W
Weight: 282g / 9.9oz
Package list:1 * Drill Chuck
Note:The actual product color may deviate from the photo due to light.
There may be a slight deviation in the measurement of product.

Features:
This drill chuck is made of high quality chrome-vanadium steel, high hardness, durable in use.
Good metallic and comfortable coat surface.
Jaws special treatment, with good abrasion resistance.
Keyless chuck finger-tightens for easy changes. Quick-change SDS shank for electric hammer.
Accuracy is accurate and reliable.
Specifications:Material: Chrome-vanadium steel
Capacity: 2-13mm / 0.08-0.51inch
Size: Approx. 12.4 x 4.2cm / 4.88 x 1.65inch
Weight: Approx. 306g
Package Included:1 x Drill Chuck
1 x SDS Adapter
Note:Only chuck and SDS adapter, no other stuff included.

Features:
High- thread and tapered holes can be tightly attached to the tool.
The housing is treated with electrophoretic paint, making the product anti-rust even in worst environment.
By using anti-thrust bearing to convert key-applied into superior gripping.
The clamping jaws are specially treated to improve wear resistance.
Enjoying super and durability.
3.0-16mm B16: 3.0-16mm denotes that clamp the drill between 3 and 16mm, and B16 represents the hole behind the chuck is about 16MM taper.
Specification:
Condition: 100% Brand New
Material: Stainless steel
Clamping range: 3.0-16mm / 0.12-0.63in
Package list:
1 * Drill Chuck
1 * Key

Features:
It can effectively prevent the petard, welding slag, dust and other objects invasion to burn the neck and face.
The lens with flip-open cover avoids frequent putting on/off to check welding point's position, which makes welding work more convenient and safer.
The adopts premium material and sponge viewing ares frame, durable, sweat absorption, heat resistant, breathable, very comfortable to wear.
With the hook&loop on 's back for quick, convenient wearing and size adjustment.
accessory to provide full protection for welding workers.
Specification:Condition: 100% Brand New and High Quality
Material: Cow Leather Sponge Glass
Color: Sun Yellow Black(Shown as pictures)
Helmet Height: Approx. 32.5cm/12.79inch
Helmet Thickness: Approx. 1.4mm/0.55inch
Head Circumference: Approx. 60cm/23.62inch
Lens Dimension(LxW): Approx. 10.8x4.5cm/4.25x1.77inch
Weight: Approx. 410g
Packing List:
1 x Welding Helmet with Lens
Notes:All size datum are measured by hand, please allow small deviations.
The actual item's color may be slightly different from the pictures shown on web due to different monitors. We appreciate your understanding.
The lens on the do not have auto darkening function.

Hole Cutter Water Drill Easy to Carry for Drilling Materials Drilling Concrete
Feature:1. With professional and practical designing, the product has beautiful appearance, easy to carry and use.
2. The drill bit is perfect for drilling materials such as ordinary stone, concrete, brick wall and other materials.
3. Made of stainless steel, the structure is strong and the service life is long.
4. With high hardness, the product is compact and suitable, durable for use.
5. Featured with high drilling efficiency and excellent performance, the product is a good choice for you.
Specification:
Item Type: Concrete Reamer
Size: Approx. 22 x 370mm / 0.9 x 14.6in
Material: Stainless steel
Package List:1 x Concrete Reamer
Feature:Made of stainless steel, the structure is strong and the service life is long.
Exquisite workmanship, high hardness, durable.
Professional and practical designing, beautiful appearance, easy to carry.
Easy to use and high drilling efficiency.
Suitable for drilling materials such as ordinary stone, concrete, brick wall and other materials.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Concrete Reamer (22 x 370mm)

Features:
Made of high quality steel, professional adapter, durability is assured.
Surface sandblasting, help to prevent rust.
Type is Max to plus adaptor.
Fits all standard Max drills.
Allows the use of any plus drill bits in a Max hammer drill.
Specifications:
Color: as the picture
Material: 40 steel
Size: as the picture
FIt for: any standard Max Drills
Weight: 565g
Package Included:
1 x Max To Plus Adaptor
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Feature:1. Ultra-high accuracy, high durability, good reliability and long service life
2. The drill body, clamping jaws, nuts, jacket and wrench are made of high-speed steel, strong and durable
3. Small size, easy to carry and store, easy to use and with good performance
4. Wide range of application, commonly used in small drilling machines, milling machines and machining centers.
5. Strict quality control and quality assurance, high safety factor, can be used with peace of mind
Specification:
Item Type: Drill Chuck
Model: JT6 13mm
Size: Approx. 13mm / 0.5in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Drill Chuck

Feature:1. Can be adapted to a variety of drilling machines, milling machines,etc
2. Self-tightening drill chuck, clamping range is 0.5-6mm, strong clamping force.
3. Carbide self-tightening drill chuck with good wear resistance and high hardness.
4. Suitable for high machining and long service life.
5. Accurate ,reliable and durable.
Specification:
Item Type: Self Tighten Drill Chuck
Material: Carbide
Clamping Range: 0.5-6mm
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 X Self Tighten Drill Chuck

Feature:1. High speed steel material, durable, precise designs and structure.
2. MT2-APU16-M10 drill chuck, special designed for milling machine.
3. High grip, impact resistance, can cut off larger margins and process.
4. Wonderful replacement for the old or broken one, directly fitment.
5. Good strength and long service life, practical high efficiency and economical.
Specification:
Condition: 100% Brand New
Item Type: Drill Chuck
Material: High Speed Steel
Model: MT2-APU16-M10
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Drill Chuck

Features:
This is a new adjustable drill stand, perfect for shop or home use.
Designed for use with power drills with collar diameter of 43mm or 38mm（1.7'' or 1.48''）.
Drilling depth up to 60mm(2.4''), has 2 holes for mounting.
It has a column bar and sturdy base with slots for fitting a machine vice.
This Plunge Drill Stand is for holding your drill steady during use and allows for much more accurate drilling than hand-held operation. (Not contain drills, flat-nose pliers, wood!)
Specification:
Base Material: Aluminum
Cranks and column material: carbon steel
Chuck diameter: Maximum 43mm (1.7'')
Drilling depth: Maximum 60mm (2.4'')
Total height: 400mm (15.7'')
Shaft diameter: 25mm (1'')
Bottom: 150 * 150mm (6'' * 6'')
Package includes:
1 x Base
1 x Column bar
1 x Rocker
1 x Lower limit Fixed sleeve
2 x Adjustable plastic fixed sleeves
1 x Hex wrench 5mm
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px #000; border-left: 1px #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px #000; border-right: 1px #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.