Szivattyúk és szivattyútartozékok

Features:1. Made of quality material, strong and durable to use.
2. With high hardness, which will never fade.
3. Great for flute repairing parts.
4. Portable and lightweight, convenient to carry and store.
5. Simple design, easy to install and take off.
Specification:Condition: 100% Brand New
Item Type: Flute Accessory
Color: Silver
Package list:1 * Flute Head Screw
Note:Flute head screw loose is not allowed, otherwise there will be additional vibration stereo sound effects. There is a baffle board to be consistent with the holes distance, each flute with a piece of wood lever, there is a at the bottom of it (17 mm). Putting it in the flute head, this line should be in the center of the mouthpiece, through turning screw cap can adjust the distance.

Features:
Made of high quality brass, durable for use.
10pcs explosion-proof slice are enough for use.
Perfect for YONGHENG Air Compressor Pump.
Wear-resistant, corrosion-resistant, high strength and hardness.
Exquisite craft, smooth surface.
Specification:Material: Brass
Size: Approx. 7*7*1mm / 0.28*0.28*0.04 inch
Quantity: 10pcs
Package Included:10 x Explosion-proof Disc

Feature:1. Made of high-quality materials, oil and abrasion resistant, durable to use.
2. Good flexibility, anti-deformation and excellent bending performance.
3. This hose is resistant to high pressure of 63mpa, practical to use.
4. Support for 30mpa air , easy to install, convenient for using.
5. Suitable for machinery manufacturing, electrical insulation protection, automobile manufacturing, aviation equipment, automation and other industries.
Specification:
Condition: 100% Brand New
Item Type: Spiral Hose
Material: Imported high pressure resistant materials
Color: As picture shown
Hose Pressure Resistant: 63mpa
Total Length: Approx. 1.5m/4.9ft
Use Length: Approx. 35-80cm/13.8-31.5in
2 End Thread: Approx. M10 x 1
Application: Support for 30mpa air
Package List:
1 x Hose

Features:
This siphon pump can quickly and easily transfer fuel, water or other liquids from one container to another.
Frequently used as a hand pump in boats for fuel supply to the out-board engine.
Easily operation, with this hand pump you can prime the fuel for easier start.
Works on the vacuum principle, fast and easy handling. Easy to clean.
With 1m long flexible PVC hose in each side, pure copper interface, durable and oil-proof.
Specifications:Material: PVC Copper Rubber
Color: Black Transparent Color
Total Length: 2.1m/82.7"
Diameter: 8mm/0.31"
Package Weight: approx. 94g
How to Use:Make one end head of the tube into the needed to extract liquid, firstly, pinch flat rubber ball forcedly to vent the air, then blocked the export of the pipe with fingers, and release the rubber ball, wait until the spheres bulging recovery slowly, and when the liquid was pumping up to fill fully the rubber ball, you can release the fingers, and repeat one or two times of this operations, it will form a continuous gravity.
Package Included:1 x Hand Pump

Features:
1. 100% brand new and high quality.
2. This is a DC 12V diaphragm pump with good performance.
3. Small body and long service life, it is a good part for choice.
4. The maximum suction range can be up to 2m.
5. Suitable for tea machine, water cooling, fish tank, etc.
Specification:
Condition: 100% Brand New
Working Voltage: 12V
Working Current: 0.5-0.7A
Flow: 1.5-2L/min (approx.)
Maximum Suction Range: 2m
Maximum Hydraulic Head: 3m
Life: 2500h(maximum)
Water Temperature: 80℃
Weight: Approx. 110g / 3.9oz
Size: Approx. 10 * 6 * 3.5cm / 3.9 * 2.4 * 1.4in
Package List:
1 * Pump
Note:
There is silicone cover in the back of the pump, do not cover the motor's cooling hole to avoid affecting the heat dissipation and service life.

Description:
It is widely applicable to increase water pressure in low water pressure area, especially for low water pressure of shower or automatic cycle of solar water heater.
Features:
Stable performance: the sensor room and magnetic control room and electronic components room are separated, which can prevent the iron material in the pipe from being adsorbed by magnetic materials so as to avoid the failure of the switch.
High temperature resistant: adopt high temperature materials, which can make sure the switch can bear hot and cold water. The highest resistant temperature is up to 70°C.
It is widely applicable to increase water pressure in low water pressure area, especially for low water pressure of shower or automatic cycle of solar water heater.
Convenient to install, safe to use. Made of high quality brass material, durable for use.
The switch is used for small current devices such as , which are less than 110V.
Specifications:Material: Brass
Max. switch voltage: AC300V DC350V
Max. switch current: DC0.7A / AC0.5A
Max. Temperature: <70°C
Thread: /2
Weight: 157g
Package List:1 x Water Flow Switch
2 x Washers

Features:
100% Brand new and high quality
This high pressure air pump filter adopts compact density filter.
Large volume, good water absorption, good performance.
Made of high quality material, with long service life.
It is not necessary to change frequently and can be reused after cleaning.
Specifications:
Material: fiber cotton
Color: white
Safe voltage: 30MPa
Fit for: for YONG HENG 30MPa Air Compressor
Size: Approx. 2 x 6cm / 0.79 x 2.36inch
Weight: 66g
Cleaning Method:1. The filter element is soaked in diluted detergent water.
2. After the filter element is filled with water, remove and then dry and then soak into the detergent water.
3. Repeat air drying several times.
4. Do not squeeze or rub. Extrusion will result in deformation of the filter core and poor dewatering.
Package included:
50 x High Pressure Pump Filter

Feature:100% Brand New And High Quality
Rated voltage: 12V DC
Current rating: &;630mA
Degree of vacuum: -80Kpa(1Mpa=10Bar=1000Kpa)
Pressure: 0.1MKpa
Flow: 20L/min
Noise: &;50 dB
Size: 112*40*75mm
If you use silicone tube:Inner diameter 3 MM diameter 6 mm
If you use PVC hose:Inner diameter 4 MM diameter 6 mm
Package Includes:1 x DC12V DC 80Kpa Vacuum Pump

Feature:1. The pump head is easy to disassemble, easy for cleaning and maintenance, practical to use.
2. Compact size and high reliability, it is suitable for viscous, non-viscous liquids.
3. Adopts buckle , the pump head can be removed with a single push, convenient for pump tube replacement and cleaning.
4. Wide application, suitable for experiments, biochemical analysis, pharmaceutical, fine chemicals, biotechnology, pharmaceuticals, products, ceramics, water treatment, environmental protection and other fields.
5. The flow direction can be changed and the flow direction can be controlled by the connection of the positive electrode and the negative electrode.
Specification:
Condition: 100% Brand New
Item Type: Peristaltic Pump
Material: Engineering Plastic Silicone
Color:
Applicable Power Supply: DC 12V, DC 24V (optional)
Working Environment: Temperature 0-40℃, Relative Humidity <80%
Media Flow Direction: The flow direction of the peristaltic pump depends on the positive and negative connection of the power supply, and the terminal can be selected positive and negative at will.
Flow Range: 0.1-100ml/min
Speed Range: 0.1-100rpm
Driver Size (Φ x H): Approx. 27.6 x 37.9 mm / 1.1 x 1.5 in
Pump Head Size (Φ x H): Approx. 31.7 x 20.1 mm / 1.3 x 0.8 in
Tube Size (ID x OD): Approx. 2.5 x 4.7 mm / 0.1 x 0.2 in
Weight: Approx. 88g / 3.1oz
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Pump

Features:
The pump shell is made of high quality plastic, durable in use.
Low starting current, high efficiency, stable and reliable operation.
Low power consumption, energy saving, environmental protection.
Self-priming function, often used in water circulation, intelligent toilet, equipment and other water supplies.
Adopting of copper core, the quality of the pump, and it has the characteristics of high lift, low noise and other characteristics.
Specifications:
Rated voltage: DC12V
Load rated current: 0.6A
No load rated current: <0.65A
No load shedding: 1.6L/min±10%
Pressure: 2.0 kg ±10%
1 kg load spit water: 1.32L/min±10%
Suction: <1.0M
Noise: 50db Max (background noise is 30db,within 0.5m)
Wiring: red: " ", black: "-"
Size: as the picture
Weight: 142g
Package included:
1 x Gear Water Pump
Note:
1. Applicable fluid: no corrosive liquid such as tap water and groundwater.
2. Applicable water temperature: 0 ° C to 90 ° C
3. With brush motor, normal temperature without pressure, continuous service life 1000 hours.
4. The water pump can not be used without water, and for high temperature medium, it can not be used continuously for a long time.
5. Install the filter on the inlet of the pump line so as to prevent the particles from entering and damage the pump body.
6. The lift is the vertical distance from the inlet of the water pipe to the outlet.
The pump has no power supply and need to prepare by yourself. DC12V and 2A power supply is appropriate

Features:
This is a small piston structure (tank volume: 0.6L) manual pump.
Working principle: When the handle is pressed by hand, the piston moves up and down under the action of a lever, which is a process of oil absorption; when the handle is loosened, the piston moves downward under the action of the spring force, and is an oil discharging process.
The pump can be combined with a throttling distributor to form a centralized lubrication system. It is suggested that the oil viscosity is N20-N500.
Left hand operated method, 4mm oil outlet diameter.
Widely used in lubrication system of CNC machine tools, machining center, production line, forging, textile, plastic, wood, rubber, mining, metallurgy, construction, printing, casting, auto, food and other mechanical equipment.
Specifications:
Model: HP-5L
Drive mode: Left hand operated
Spit: 5ml/min
Maximum discharge pressure: 5kgf/cm²
Capacity: 650cc
Outlet diameter: M8*1(4mm)
Weight: Approx. 541g / 19.1oz
Package List:
1 * Manual Lubricating Pump

Feature:1. The peristaltic pump has high performance, no backflow, stable and controllable.
2. The peristaltic pump is quite lightweight and compact, support forward and reverse.
3. Good rebound to protect the pump tube and prolong the service life.
4. Made of alloy, good excellent corrosion resistance, high temperature resistance.
5. The suction power is about 5m/16.4ft, the liquid pump can work well at thia depth.
Specification:
Condition: 100% Brand New
Item Type: Peristaltic Pump
Material: Alloy
Color: As Pictures Shown
Input Voltage: 12V
Power Consumption: 2W
Pump Tube: Silicone Pump Tube
Suction Power: Approx. 5m/16.4ft
Head: Approx. 10m/32.8ft
Maximum Flow: 22ml/min
Transmission Accuracy: 1%
Maximum Outlet Pressure: 0.1 Mpa
Maximum Inlet Pressure: -0.01 MPa
Applicable Pump Tube Wall Thickness: Approx. 1-1.2mm/0.04-0.05in
Motor Working Temperature: About 70℃-80℃
Noise: <45dB
Motor Life: 500 Hours
Working Temperature: 70-80℃
Relative Humidity: ＜80%
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Micro Peristaltic Pump

Features:
It controls the inlet and outlet of the diaphragm, forms the drive mechanism after the power drive to drive the reciprocating movement of the piston, and drives the diaphragm back and forth through the hydraulic pressure to work to suck and discharge the liquid
This pump can flow rate of 0.4-1L/min, and suitable for long working time below 3Bar
Small size, strong structure, and long serving life
Chemical stability, could withstand dry rotation, durable and free maintenance
Applications: widely used in instruments and equipment, medicine and chemical industry, home appliances and other fields.
Specification:
Voltage: 24V
Flow rate: liquid (320ml/min), gas (3.2L/min)
Self-priming height: 4 m
Pressure: liquid (3bar), gas (1bar)
Flow rate: 0.4 -1L/min
Ambient temperature: 0-40℃
Size: 8.5*3.3cm/3.4*1.3in
Weight: Approx.239g/8.4oz
Package list:
1 x Diaphragm Pump

DC12V Mini Vacuum Pump Negative Pressure Suction Pumping W/Holder 5L/min 120kpa
Features:
Micro-pump is powered by miniature DC motor drive, drive internal mechanical eccentric motion, driven by an eccentric movement the diaphragm reciprocates.
Small size, stable and reliable, high efficiency, suction capacity is up to 5L/ min.
Low noise, low power consumption. Especially suitable for high negative environmental requirements.
No maintenance, no oil, no pollution delivery medium.
Micro-pump is mainly used in medicine, gas analysis sampling, instrument and other fields.
Specifications:
Rated voltage: DC 12V
Rated current: 500mA
Rated power: 6W
Water absorption capacity: 5L/min
Vacuum: - 65kpa
Maximum pressure: 120kpa
Noise: < 60db
Size: as the picture
Weight: 321g
Package included:
1 x Mini Vacuum Pump

Feature:1. Widely used in yachts, fishing boats, and campers and other industries for water intaking.
2. No need separate float switch, fully automatic bilge pump.
3. Built-in float switch system, when the water rises, after the pump starts, you can use the power supply.
4. Adopt compact, efficient and long-life motor to made, stable and durable.
5. Compact size, save space.
Specification:
Item type: Automatic Bilge Pumps
Condition: 100% brand new
Model: HYBP2 G1100-02
Material: engineering plastics
Weight: Approx. 542g
Color: As picture shown
Voltage: 24V
Performance: Automatic
Purpose: Submersible pump
Drive mode: electric
Transport medium: cleaning pump
Pump shaft position: horizontal
Impeller structure: semi-open impeller
Impeller suction mode: single suction
Flow: 2.84 (mÂł/ h)
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Bilge Pump
1 x Instruction

Feature:1. The kit has good corrosion resistance, high hardness and no deformation after long-term use.
2. Great replacement for your original gaskets and bolts that are rust and broken.
3. Reliable performance, replace number for reference is 12617944.
4. Especially designed fit for LS1 LS3 LS6 LS7 LS9 LSX Engines.
5. It has good sealing performance, giving you a good driving experience.
Specification:
Condition: 100% Brand New
Item Type: Exhaust Manifold Gaskets & Bolts
Material: Steel
Color: Silver
OEM: 12617944
Fitment:Fit for LS1 LS3 LS6 LS7 LS9 LSX Engines
Fit for Camaro & Firebird 1999-2002
Fit for Camaro 2010-2013
Fit for 1999-2013
Fit for GTO 2004-2006
Fit for CTS-V 2004-2007
Fit for G8 2008-2009
Fit for Tahoe, Yukon, Escalade 2000-2013
Fit for Hummer H2 2003-2009
Fit for Avlanche 2001-2013
Fit for Silverado & Sierra (4.8L, 5.3L, 6.0L) 1999-2013
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
2 x Gaskets
12 x Bolts
Note:
1. Please double check the part number of your item, matching information is for reference only.
2. If you are unsure of the item, please contact us before buying to avoid unnecessary return, thanks!

Features:
Made of high quality metal material, wear-resistant, corrosion-resistant.
Widely used in punching machine, lathe machine, cutting machine, milling machine, etc.
Pull the handle with your hand, the plunger is pushed and the oil in the cylinder is excluded. Release it, the plunger absorb the oil under the spring force.
The pump can be combined with a throttling distributor to form a lubrication system. It is recommended to use oil viscosity N20-N1000.
Products use high-quality seals, not easy to .
Specification:Name: Manual Pump Hand
Pump material: Metal
Pump shaft position: side vertical
Impeller suction method: single suction
Drive mode: manual
Transmission medium: oil
Flow: 8m3/h
Discharge capacity: 8ml/min
Max.discharge pressure: 15kgf/cm²
Capacity: 500CC
Discharge port: two port(left & right)
Weight: 949g
Package Included:1 x Manual Lubricating Pump

Feature:1. This is a high quality DC micro diaphragm pump.
2. Widely used in general industry equipment, farming (lawn and garden), ship, vehicle cleaning, ground cleaning, water purification and water treatment equipment.
3. Safe food-grade materials, healthy, environmentally friendly.
4. Small size, self-priming and self-discharging, convenient to use.
5. Can be used for the transportation of various alcohols, liquid medicines, drinking water and edible liquids.
Specification:
Condition: 100% Brand New
Item Type: Water Pump
Voltage: 12V
Maximum Power: 15W
Maximum Pressure: 0.5MPa
Working Pressure: 0.3MPa
Opening Flow: 1.5L/M
Vertical Suction: Approx. 2m / 6.6ft
Lift: Approx. 40m / 131.2ft
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Water Pump

Features:
This is a DC 12V mini oil-less vacuum pump of -85kPa vacuum degree.
Made of high quality material, it is durable and has good performance.
It uses high-performance oil-less lubrication material and wear-resisting thin-wall cylinder sleeve.
The pump has high efficiency, low noise, small vibration and long service life.
Widely used in household oxygen generators, dental laboratory equipment, equipment, vacuum adsorption automation equipment, vacuum packing machines, and many other industries.
Specifications:
Model: VN-C4
Working Voltage: DC9V~14V
Rated Voltage: DC12V
Power: 42W
Vacuum Degree: -85kPa
Flow: 40L/min
Weight: 488g(approx.)
Package Includes:
1 x Vacuum Pump

DC 24V 42W Mini Oilless Pompa A Vuoto -85KPa 40L/Min Vacuum Pump
Features:
This is a DC 24V mini oil-less vacuum pump of -85kPa vacuum degree.
Made of high quality material, it is durable and has good performance.
It uses high-performance oil-less lubrication material and wear-resisting thin-wall cylinder sleeve.
The pump has high efficiency, low noise, small vibration and long service life.
Widely used in household medical oxygen generators, dental medical laboratory equipment, disinfection equipment, vacuum adsorption automation equipment, vacuum packing machines, and many other industries.
Specification:Model: VN-C4
Working Voltage: DC 24V
Power: 42W
Vacuum Degree: -85kPa
Flow: 40L/min
Size: Approx. 8.8*4.3*11cm/3.5*1.7*4.3inch
Weight: Approx. 463g / 16.3oz
Package List:1 x Mini Vacuum Pump
Note:
12mm external diameter air pipes are required.
Select the corresponding voltage, equip with corresponding switch power supply.
Connect the air inlet and outlet port with corresponding air pipe.
The medium of this mini vacuum pump is gas, solid and liquid cannot Into the pump.
Mini pump cannot work for long time, long time working will affect the service life. (Can be used continuously for 2-3 hours)

Pompa dosatrice da per pompa peristaltica industriale con portata regolabile
Feature:1. Industrial grade peristaltic pump, single head design, mainly used for aquarium quantitative liquid addition, calcium return, laboratory and industrial liquid sampling, etc.
2. Adjustable flowing rate peristaltic pump, pump head with imported peristaltic pump tube
3. The flowing rate of the pump can be adjusted by the knob
4. The pump meets multiple flowing requirements, and its lowest cost among adjustable speed pumps
5. The pump head tube is resistant to corrosion acids and alkalis, and can be fixed with clips, which is very convenient to use
Specification:
Item Type: Peristaltic Pump
Performance Characteristics:
Low-cost flowing adjustment, multiple pumps in one
Easy and fast pump tube replacement
Low noise and small space occupation
Simple structure, maintenance-free
3 x rotors with moderate pulsation
Pump Body Flowing: Adjustable, 1ml-250ml / min.
Product Power Supply: AC220V 50 / 60HZ (commercial power)
Product Size: Approx. 100 x 50 x 65mm / 3.9 x 2 x 2.6in
Working Mode: Connect to power to start
The flowing rate can be adjusted by the knob
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Peristaltic Pump
1 x Power Adapter
1 x Hose
1 x Connector
1 x User Manual

Description:
This self-priming water pump can lift water to your house roof easily. With built-in pressure switch, it automatically turns the pump off when pressure builds up such as turning off the tap and it will automatically turn back on when you turn the tap back on. There is an indicating arrow on the pump body to direct the water flow, and it is just directs to the outlet water side.
Features:
1.When the pump's water outlet is completely blocked(no water leakage and the pressure goes to the maximum value 11 kg.f/cm2), the power will be automatically cut off and the pump motor will stop. When the water outlet is opened, the pump will start operating again.
2. Self priming smoothly, easy connecting system, powerful automatic pressure pump, extremely efficient, very low current draw and offer high capacity output.
3. ABS solid construction body, soft rubber mounting, stable and heavy duty equipment. Easy to dissipate heat with two big holes on one end of the pump body.
4. An indicating arrow on the pump surface to direct the water flow, and it directs to the outlet water side.
5. Wide applications, such as for car washing machine, the solar energy water, remote control water equipment, some place need to control the switch frequently, somewhere energy saving, etc.
Specifications:
Material: ABS shell
Main Color: Black
Voltage: DC 12V
Power(max): 100W
Pressure(max): 1.1Mpa/160psi (145psi=1Mpa)
Flow(max): 8L/min
Protection Valve Type: intelligent valve (with pressure switch)
Head: 70 meters
Range: 9 meters
Suction Distance: 1.5 meters
Size(L x W x G): 18.3 x 4.7 x 4.8cm/7.2'' x 1.85'' x 1.89''
Suitable Inlet/Outlet Hose Size: 12mm outer diameter, 8mm inner diameter
Package Weight: approx. 1.18kg
Applications: Suitable for car washing machine, the solar energy water, remote control water equipment, some place need to control the switch frequently, somewhere energy saving, etc
Package Included:
1 x Self Priming Water Pump
Notes:
1. Easy to install, but professional installation is highly recommended.
2. Inlet water end must use filters, the power supply must form a complete set.

Feature:1. Wide application range, can be applied to water pumps, fans, vehicles, ordinary motor soft start, etc.
2. Can replace the soft start of the inverter and the soft start of the star triangle
3. Simple connection circuit, no need to connect bypass contactor, with simple operation and powerful function
4. High-quality materials and elaborate production, durable and have a long service life
5. With strict quality control and quality assurance, high safety factor, can be used with peace of mind
Specification:
Item Type: 3-Phase Motor Soft Start Module
Optional Style: Module, Module Heat Sink
3-phase online motor soft start module, solve the problem of slow start of 1-20KW low power motor
The soft start time is adjustable for 30 seconds (time rise refers to 0-380V).
The starting voltage is adjustable from 150-250V to the rated voltage (380V)
There are two ways to use:1. When the switch is closed, the soft start of the main power supply starts.
2. Use the switch to control, start by closing the soft start, open and stop
Model: TSR-60WA-R1（6KW） (with soft start without soft stop)
Suitable for 3-Phase: 380V, compatible: 50-60HZ
Heat Sink Voltage: Default 220VAC
Selection: 10A below 1KW, 20A below 2KW, 40A from 3-4KW, 60A from 5-6KW, 80A from 7-8KW, 100A from 8-10KW, 150A from 11-15KW, 200A from 20KW, the more motor power If the heat sink is large, the heat sink should also be matched. The product has been sold over 1,000 pieces, and only a few places are not suitable for the motor
Applicable Place:It can be widely used in fans, pumps, belt conveyors, ball mills, conveyors and compressors.It is an ideal replacement for traditional star - triangle start, auto-coupling buck, magnetron buck, frequency converter and other buck starting equipment. ,Safe and reliable.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Module
or
1 x Overall ( Module Heat Sink)
Note:3-phase motor soft start module, no need to switch contactor and can work for a long time

Feature:1. Wide application range, can be applied to water pumps, fans, vehicles, ordinary motor soft start, etc.
2. Can replace the soft start of the inverter and the soft start of the star triangle
3. Simple connection circuit, no need to connect bypass contactor, with simple operation and powerful function
4. High-quality materials and elaborate production, durable and have a long service life
5. With strict quality control and quality assurance, high safety factor, can be used with peace of mind
Specification:
Item Type: 3-Phase Motor Soft Start Module
Optional Style: Module, Module Heat Sink
3-phase online motor soft start module, solve the problem of slow start of 1-20KW low power motor
The soft start time is adjustable for 30 seconds (time rise refers to 0-380V).
The starting voltage is adjustable from 150-250V to the rated voltage (380V)
There are two ways to use:1. When the switch is , the soft start of the main power supply starts.
2. Use the switch to control, start by closing the soft start, open and stop
Model: TSR-60WA-R1（6KW） (with soft start without soft stop)
Suitable for 3-Phase: 380V, compatible: 50-60HZ
Heat Sink Voltage: Default 220VAC
Selection: 10A below 1KW, 20A below 2KW, 40A from 3-4KW, 60A from 5-6KW, 80A from 7-8KW, 100A from 8-10KW, 150A from 11-15KW, 200A from 20KW, the more motor power If the heat sink is large, the heat sink should also be matched. The product has been sold over 1,000 pieces, and only a few places are not suitable for the motor
Applicable Place:It can be widely used in fans, pumps, belt conveyors, ball mills, conveyors and compressors.It is an ideal replacement for traditional star - triangle start, auto-coupling , magnetron , frequency converter and other starting equipment. ,Safe and reliable.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Module
Note:3-phase motor soft start module, no need to switch contactor and can work for a long time

Feature:1. With the ability to solve the problem of slow start of 1-20KW low power motor, such three-phase motor soft start module can be easily installed.
2. And motor start module enables to make replacement of soft start to inverter or soft star-delta starting , etc.
3. Keeps super simple wiring, motor start board is powerful and there is no need to connect bypass contactor.
4. Meanwhile, motor controller can be used widely for water pump, fan, air vehicle or ordinary motor soft start.
5. Made by exquisite craftsmanship, soft start controller installation does require particularly complicated operations.
Specification:
Item Type: Motor controller
Model: TSR-80WA-R1（8KW）(with soft start without soft stop)
Suitable for Three-Phase: 380V
Compatible: 50-60HZ
Radiator Voltage: Default 220VAC
Soft Start Time : 30 seconds adjustable (time rising refers to 0-380V).
Starting Voltage: Adjustable slow start from 150-250V to rated voltage (380V)
Two Ways Use:1. While switch closed, the soft start of the main power supply starts.
2. Use switch to control, start by closing the soft start, stop when disconnected.
Selection: 10A below 1KW, 20A below 2KW, 40A from 3-4KW, 60A from 5-6KW, 80A from 7-8KW, 100A from 8-10KW, 150A from 11-15KW, 200A from 20KW.If the heat sink is larger, the heat sink should also be matched.
Applicable Places:Widely used in fans, pumps, belt conveyors, ball mills, conveyors and compressors as an excellent replacement for traditional for star-delta conversion, auto-coupling voltage reduction, magnetron voltage reduction, frequency converter and other voltage reduction starting equipment, safe and reliable.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Module
or
1 x Overall (Module Radiator)
Note:There is no need to switch contactor, three-phase motor soft start module supports long time working.

Feature:1. Wide application range, can be applied to water pumps, fans, vehicles, ordinary motor soft start, etc.
2. Can replace the soft start of the inverter and the soft start of the star triangle
3. Simple connection circuit, no need to connect bypass contactor, with simple operation and powerful function
4. High-quality materials and elaborate production, durable and have a long service life
5. With strict quality control and quality assurance, high safety factor, can be used with peace of mind
Specification:
Item Type: 3-Phase Motor Soft Start Module
Optional Style: Module, Module Heat Sink
3-phase online motor soft start module, solve the problem of slow start of 1-20KW low power motor
The soft start time is adjustable for 30 seconds (time rise refers to 0-380V).
The starting voltage is adjustable from 150-250V to the rated voltage (380V)
There are two ways to use:1. When the switch is closed, the soft start of the main power supply starts.
2. Use the switch to control, start by closing the soft start, open and stop
Model: TSR-100WA-R1（10KW） (with soft start without soft stop)
Suitable for 3-Phase: 380V, compatible: 50-60HZ
Heat Sink Voltage: Default 220VAC
Selection: 10A below 1KW, 20A below 2KW, 40A from 3-4KW, 60A from 5-6KW, 80A from 7-8KW, 100A from 8-10KW, 150A from 11-15KW, 200A from 20KW, the more motor power If the heat sink is large, the heat sink should also be matched. The product has been sold over 1,000 pieces, and only a few places are not suitable for the motor
Applicable Place:It can be widely used in fans, pumps, belt conveyors, ball mills, conveyors and compressors.It is an ideal replacement for traditional star - triangle start, auto-coupling buck, magnetron buck, frequency converter and other buck starting equipment. ,Safe and reliable.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Module
or
1 x Overall ( Module Heat Sink)
Note:3-phase motor soft start module, no need to switch contactor and can work for a long time

Feature:1. Wide application range, can be applied to water pumps, fans, vehicles, ordinary motor soft start, etc.
2. Can replace the soft start of the inverter and the soft start of the star triangle
3. Simple connection circuit, no need to connect bypass contactor, with simple operation and powerful function
4. High-quality materials and elaborate production, durable and have a long service life
5. With strict quality control and quality assurance, high safety factor, can be used with peace of mind
Specification:
Item Type: 3-Phase Motor Soft Start Module
Optional Style: Module, Module Heat Sink
3-phase online motor soft start module, solve the problem of slow start of 1-20KW low power motor
The soft start time is adjustable for 30 seconds (time rise refers to 0-380V).
The starting voltage is adjustable from 150-250V to the rated voltage (380V)
There are two ways to use:1. When the switch is , the soft start of the main power supply starts.
2. Use the switch to control, start by closing the soft start, open and stop
Model: TSR-100WA-R1（10KW） (with soft start without soft stop)
Suitable for 3-Phase: 380V, compatible: 50-60HZ
Heat Sink Voltage: Default 220VAC
Selection: 10A below 1KW, 20A below 2KW, 40A from 3-4KW, 60A from 5-6KW, 80A from 7-8KW, 100A from 8-10KW, 150A from 11-15KW, 200A from 20KW, the more motor power If the heat sink is large, the heat sink should also be matched. The product has been sold over 1,000 pieces, and only a few places are not suitable for the motor
Applicable Place:It can be widely used in fans, pumps, belt conveyors, ball mills, conveyors and compressors.It is an ideal replacement for traditional star - triangle start, auto-coupling , magnetron , frequency converter and other starting equipment. ,Safe and reliable.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Module
Note:3-phase motor soft start module, no need to switch contactor and can work for a long time

220V Swimming Pool 125Psi 516GPD C-660P Blue And White Dosing Pump Double-Ball
Features:1. Used for chemical dosage and sanitizing of swimming pool.
2. Generally used with water quality monitor. Can be fully automatic, semi-automatic control.
3. Output quantity up to 516GDP(Gallons per day). Output pressure up to 125PSI. Stroke regulation 4-100% , small doses at high operating rates are allowed.
4. A simple, high efficient standard design, moving parts are kept at a minimum level to help keep the unit nearly maintenance-free.
5. C-600P injector has an autofocus frame, front side head, easy to install and adjust.
Specification:Condition:100% Brand New
Color: As Pictures Shown
Voltage: 220V ~ 50HZ-45W
Maximum working pressure: 125 psi (8.6 bar)
Biggest fluid temperature: 130 ℉(54 ℃)
Maximum temperature: 14 °to 110 ℉ / - 10° to 43 ℃
Weight: Approx.2602g/91.8oz
Package list:
1 * Swimming Pool Dosing Pump

Features:
This oil gun nozzle can be used to measure the flow of pipeline fluid.
Well designed gun nozzle is resistant to oil dropping or leaking, small size, accurate measurement, simple operation.
LCD displays single time filling amount, and will save total filling amount.
Real-time error coefficient calibration, easy to operate, provide five units of Liters, Gallons, Pints, Quarts, Kg, and support low battery warning.
Used for filling fluid such as gear oil, engine oil, antifreeze, it is a great oil filling equipment for factories, gas stations, etc.
Specifications:
Speed: 1-35 L/min
Maximum Working Pressure: 1500psi (100bar)
Operating Temperature: -10℃~ 50℃
Accuracy: ±0.3%
Inlet: 3/4BSP
Outlet: 1/2BSP
Suitable Oil Viscosity: 8-5000 mPas
Length: 55cm/21.65in
Weight: 1964g(approx.)
Package Includes:
1 x Oil Gun Nozzle

Description:Description:100% Brand New, High Quality.
Widely used for oxygen tank aquarium circular, DIY projects.
Compact dimension and light weight.
At the end of this mini air pump engine has been welded.
Type: Mini Engine Air Pump
Material: metal, plastic
Rated Voltage: 12 V DC
Rated current: 250mA
Max. Pressure:> 450 mmHg
Air flow:> 2.0 L/Min
Noise level: <65dB
Features: Mini, durable, good quality
Total Size (L x W): 27x58mm/1.06 "x 2.28" (Approx.)
Hole Diameter: 4.2mm/0.17 "(Approx.)
Note:Because of the difference in light setting, the color of the product may be slightly different from the images.
Please allow slight difference in size due to different manual measurement.
Package Included:1x Mini Air Pump Motor with bracket
SKU: PT0797
Preview:

Hand Primer Pump In-line 10mm Fuel Hose Car Motorcycle Boat Silicone Hot
Detail:
*Petrol Gas Hand Primer Pump is used for car motorcycle, and boats.
*Used for introducing fuel into the fuel pump after replacement of the fuel filter
*Big silicone ball with a Shut-off valve, manual operation, strong suction, convenient to use.
*Item Condition:100% Brand New
*Hand Ball Pump Material:Silicone
*Hose Material:PVC
*Color: As Pictures Show
*Hose size:(L*D)2m *10mm (Approx.)
Package Contents:
1*Hand Ball Pump with Valve
1*2m Hose
2*Clamps
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Gas Hand Primer Pump Kit In-line 10mm Fuel Motorcycle PVC Silicone Hot
Detail:
*Petrol Gas Hand Primer Pump is used for car motorcycle, and boats.
*Used for introducing fuel into the fuel pump after replacement of the fuel filter
*Big silicone ball with a Shut-off valve, manual operation, strong suction, convenient to use.
*Item Condition:100% Brand New
*Hand Ball Pump Material:Silicone
*Hose Material:PVC
*Color: As Pictures Show
*Hose size:(L*D)2m *10mm (Approx.)
Package Contents:
1*Hand Ball Pump with Valve
1*2m Hose
2*Clamps
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Petrol Gas Hand Primer Pump In-line With 10mm Fuel Hose For Car Motorcycle Boat
Detail:
*Petrol Gas Hand Primer Pump is used for car motorcycle, and boats.
*Used for introducing fuel into the fuel pump after replacement of the fuel filter
*Big silicone ball with a Shut-off valve, manual operation, strong suction, convenient to use.
*Item Condition:100% Brand New
*Hand Ball Pump Material:Silicone
*Hose Material:PVC
*Color: As Pictures Show
*Hose size:(L*D)2m *10mm (Approx.)
Package Contents:
1*Hand Ball Pump with Valve
1*2m Hose
2*Clamps
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Petrol Gas Hand Primer Pump In-line With 2m X 10mm Fuel Hose Replacement Spare
Detail:
*Petrol Gas Hand Primer Pump is used for car motorcycle, and boats.
*Used for introducing fuel into the fuel pump after replacement of the fuel filter
*Big silicone ball with a Shut-off valve, manual operation, strong suction, convenient to use.
*Item Condition:100% Brand New
*Hand Ball Pump Material:Silicone
*Hose Material:PVC
*Color: As Pictures Show
*Hose size:(L*D)2m *10mm (Approx.)
Package Contents:
1*Hand Ball Pump with Valve
1*2m Hose
2*Clamps
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Mini Screw Tap Drill Bits Auto repair Machinery Hand Tapper Accessories
Details:
*100% brand new and high quality.
*Made of alloy steel makes it with the highest durability.
*Perfect for auto repair and machinery.
*Easy to operation even in narrow space.
*Matrerial: Alloy Steel
*Color: As picture show
*Size: M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M2.6 M3.5
*Quantity: 10pcs
Package Contents:
10*Screw Tap
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Screw Tap Straight Flute Tools 10pcs Alloy Steel Drill Bits Industrial
Details:
*100% brand new and high quality.
*Made of alloy steel makes it with the highest durability.
*Perfect for auto repair and machinery.
*Easy to operation even in narrow space.
*Matrerial: Alloy Steel
*Color: As picture show
*Size: M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M2.6 M3.5
*Quantity: 10pcs
Package Contents:
10*Screw Tap
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

High-Pressure PCP Hand Pump Air Filter Oil-Water Separator Set Tank M10*1 Duable
Item Details:
100% brand new and high quality
Made of high quality material, durable and practical to use
Optional Types: Gold, Gold with 50cm Hose, Gold with 100cm Hose
Filter Thread: M10*1
Male Connector: 8mm/M10*1 thread
Female Connector:M10*1
Hose: High Quality Spring Stainess 50cm/100cm Length(Approx.)
Cylindrical Filter Cotton:25pcs
Cylindrical Filter Cotton:25pcs
O-ring:2pcs
Gasket: 2pcs
Package Contents(Optional):
Package Contents 1
1 * Filter Oil-Water Separator
Package Contents 2
1 * Filter Oil-Water Separator 1*Hose
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

High-Pressure PCP Hand Pump Air Filter Oil-Water Separator Set Tank M10*1 Duable
Item Details:
100% brand new and high quality
Made of high quality material, durable and practical to use
Optional Types: Gold, Gold with 50cm Hose, Gold with 100cm Hose
Filter Thread: M10*1
Male Connector: 8mm/M10*1 thread
Female Connector:M10*1
Hose: High Quality Spring Stainess 50cm/100cm Length(Approx.)
Cylindrical Filter Cotton:25pcs
Cylindrical Filter Cotton:25pcs
O-ring:2pcs
Gasket: 2pcs
Package Contents(Optional):
Package Contents 1
1 * Filter Oil-Water Separator
Package Contents 2
1 * Filter Oil-Water Separator 1*Hose
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

High-Pressure PCP Hand Pump Air Filter Oil-Water Separator Set Tank M10*1 Duable
Item Details:
100% brand new and high quality
Made of high quality material, durable and practical to use
Optional Types: Gold, Gold with 50cm Hose, Gold with 100cm Hose
Filter Thread: M10*1
Male Connector: 8mm/M10*1 thread
Female Connector:M10*1
Hose: High Quality Spring Stainess 50cm/100cm Length(Approx.)
Cylindrical Filter Cotton:25pcs
Cylindrical Filter Cotton:25pcs
O-ring:2pcs
Gasket: 2pcs
Package Contents(Optional):
Package Contents 1
1 * Filter Oil-Water Separator
Package Contents 2
1 * Filter Oil-Water Separator 1*Hose
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Description:
Description:This siphon pumps lets you quickly and easily transfer fuel, water or other liquids from one container to another.
The rubber squeeze pump generates quick suction to start the siphon.
For save and easy removal of fluids from car radiators and fuel tank.
Two 100cm long flexible PVC transparent pipes suitable and approved for use with petroleum-base.Pure copper interface, petrol resistant, avoid corrosion.
Material: rubber
Type: single air bag, 2 pipe clamps, 1 meter tube, oil absorber set 2 meters tube, oil absorber set 3 meters tube, oil absorber set 5 meters tube
Joint: pure copper
Usage:1, single-handedly took on both ends of the pipe, and another hand continuous pinched black suction air bags, tell the wind blow out a head, a head is the oil outlet, and no gas blowing out a head is the oil inlet. (identify the oil outlet)
2. Put the inlet into the fuel tank and the outlet into the oil bucket, and control the distance between the pipe and the height difference between the inlet and outlet; (the pipe is thin enough to reach most of the car's fuel tank. The pipe is transparent and soft enough to control the flow.)
3, after step need to be aware that just began to smoke when need a hand to hold the oil outlet, squeezing suction air bag with one hand, such as gas suction inlet section pipe full (inlet to air a), of oil outlet, and gasoline will follow the artesian pipe to tank, basic don't need to go straight to knead airbags.
Warm tips:The oil in the fuel tank of the car needs to be pumped
1. There is no oil extraction filter net in the oil tank
2. The pipe should be inserted into the mailbox when pumping oil
Included:1 * Tools (delivered according to the type you choose)
Preview:

Description:
Description:This siphon pumps lets you quickly and easily transfer fuel, water or other liquids from one container to another.
The rubber squeeze pump generates quick suction to start the siphon.
For save and easy removal of fluids from car radiators and fuel tank.
Two 100cm long flexible PVC transparent pipes suitable and approved for use with petroleum-base.Pure copper interface, petrol resistant, avoid corrosion.
Material: rubber
Type: single air bag, 2 pipe clamps, 1 meter tube, oil absorber set 2 meters tube, oil absorber set 3 meters tube, oil absorber set 5 meters tube
Joint: pure copper
Usage:1, single-handedly took on both ends of the pipe, and another hand continuous pinched black suction air bags, tell the wind blow out a head, a head is the oil outlet, and no gas blowing out a head is the oil inlet. (identify the oil outlet)
2. Put the inlet into the fuel tank and the outlet into the oil bucket, and control the distance between the pipe and the height difference between the inlet and outlet; (the pipe is thin enough to reach most of the car's fuel tank. The pipe is transparent and soft enough to control the flow.)
3, after step need to be aware that just began to smoke when need a hand to hold the oil outlet, squeezing suction air bag with one hand, such as gas suction inlet section pipe full (inlet to air a), of oil outlet, and gasoline will follow the artesian pipe to tank, basic don't need to go straight to knead airbags.
Warm tips:The oil in the fuel tank of the car needs to be pumped
1. There is no oil extraction filter net in the oil tank
2. The pipe should be inserted into the mailbox when pumping oil
Included:1 * Tools (delivered according to the type you choose)
Preview:

Description:
Description:This siphon pumps lets you quickly and easily transfer fuel, water or other liquids from one container to another.
The rubber squeeze pump generates quick suction to start the siphon.
For save and easy removal of fluids from car radiators and fuel tank.
Two 100cm long flexible PVC transparent pipes suitable and approved for use with petroleum-base.Pure copper interface, petrol resistant, avoid corrosion.
Material: rubber
Type: single air bag, 2 pipe clamps, 1 meter tube, oil absorber set 2 meters tube, oil absorber set 3 meters tube, oil absorber set 5 meters tube
Joint: pure copper
Usage:1, single-handedly took on both ends of the pipe, and another hand continuous pinched black suction air bags, tell the wind blow out a head, a head is the oil outlet, and no gas blowing out a head is the oil inlet. (identify the oil outlet)
2. Put the inlet into the fuel tank and the outlet into the oil bucket, and control the distance between the pipe and the height difference between the inlet and outlet; (the pipe is thin enough to reach most of the car's fuel tank. The pipe is transparent and soft enough to control the flow.)
3, after step need to be aware that just began to smoke when need a hand to hold the oil outlet, squeezing suction air bag with one hand, such as gas suction inlet section pipe full (inlet to air a), of oil outlet, and gasoline will follow the artesian pipe to tank, basic don't need to go straight to knead airbags.
Warm tips:The oil in the fuel tank of the car needs to be pumped
1. There is no oil extraction filter net in the oil tank
2. The pipe should be inserted into the mailbox when pumping oil
Included:1 * Tools (delivered according to the type you choose)
Preview:

Description:
Description:This siphon pumps lets you quickly and easily transfer fuel, water or other liquids from one container to another.
The rubber squeeze pump generates quick suction to start the siphon.
For save and easy removal of fluids from car radiators and fuel tank.
Two 100cm long flexible PVC transparent pipes suitable and approved for use with petroleum-base.Pure copper interface, petrol resistant, avoid corrosion.
Material: rubber
Type: single air bag, 2 pipe clamps, 1 meter tube, oil absorber set 2 meters tube, oil absorber set 3 meters tube, oil absorber set 5 meters tube
Joint: pure copper
Usage:1, single-handedly took on both ends of the pipe, and another hand continuous pinched black suction air bags, tell the wind blow out a head, a head is the oil outlet, and no gas blowing out a head is the oil inlet. (identify the oil outlet)
2. Put the inlet into the fuel tank and the outlet into the oil bucket, and control the distance between the pipe and the height difference between the inlet and outlet; (the pipe is thin enough to reach most of the car's fuel tank. The pipe is transparent and soft enough to control the flow.)
3, after step need to be aware that just began to smoke when need a hand to hold the oil outlet, squeezing suction air bag with one hand, such as gas suction inlet section pipe full (inlet to air a), of oil outlet, and gasoline will follow the artesian pipe to tank, basic don't need to go straight to knead airbags.
Warm tips:The oil in the fuel tank of the car needs to be pumped
1. There is no oil extraction filter net in the oil tank
2. The pipe should be inserted into the mailbox when pumping oil
Included:1 * Tools (delivered according to the type you choose)
Preview:

Description:
Description:This siphon pumps lets you quickly and easily transfer fuel, water or other liquids from one container to another.
The rubber squeeze pump generates quick suction to start the siphon.
For save and easy removal of fluids from car radiators and fuel tank.
Two 100cm long flexible PVC transparent pipes suitable and approved for use with petroleum-base.Pure copper interface, petrol resistant, avoid corrosion.
Material: rubber
Type: single air bag, 2 pipe clamps, 1 meter tube, oil absorber set 2 meters tube, oil absorber set 3 meters tube, oil absorber set 5 meters tube
Joint: pure copper
Usage:1, single-handedly took on both ends of the pipe, and another hand continuous pinched black suction air bags, tell the wind blow out a head, a head is the oil outlet, and no gas blowing out a head is the oil inlet. (identify the oil outlet)
2. Put the inlet into the fuel tank and the outlet into the oil bucket, and control the distance between the pipe and the height difference between the inlet and outlet; (the pipe is thin enough to reach most of the car's fuel tank. The pipe is transparent and soft enough to control the flow.)
3, after step need to be aware that just began to smoke when need a hand to hold the oil outlet, squeezing suction air bag with one hand, such as gas suction inlet section pipe full (inlet to air a), of oil outlet, and gasoline will follow the artesian pipe to tank, basic don't need to go straight to knead airbags.
Warm tips:The oil in the fuel tank of the car needs to be pumped
1. There is no oil extraction filter net in the oil tank
2. The pipe should be inserted into the mailbox when pumping oil
Included:1 * Tools (delivered according to the type you choose)
Preview:

Description:
Description:This siphon pumps lets you quickly and easily transfer fuel, water or other liquids from one container to another.
The rubber squeeze pump generates quick suction to start the siphon.
For save and easy removal of fluids from car radiators and fuel tank.
Two 100cm long flexible PVC transparent pipes suitable and approved for use with petroleum-base.Pure copper interface, petrol resistant, avoid corrosion.
Material: rubber
Type: single air bag, 2 pipe clamps, 1 meter tube, oil absorber set 2 meters tube, oil absorber set 3 meters tube, oil absorber set 5 meters tube
Joint: pure copper
Usage:1, single-handedly took on both ends of the pipe, and another hand continuous pinched black suction air bags, tell the wind blow out a head, a head is the oil outlet, and no gas blowing out a head is the oil inlet. (identify the oil outlet)
2. Put the inlet into the fuel tank and the outlet into the oil bucket, and control the distance between the pipe and the height difference between the inlet and outlet; (the pipe is thin enough to reach most of the car's fuel tank. The pipe is transparent and soft enough to control the flow.)
3, after step need to be aware that just began to smoke when need a hand to hold the oil outlet, squeezing suction air bag with one hand, such as gas suction inlet section pipe full (inlet to air a), of oil outlet, and gasoline will follow the artesian pipe to tank, basic don't need to go straight to knead airbags.
Warm tips:The oil in the fuel tank of the car needs to be pumped
1. There is no oil extraction filter net in the oil tank
2. The pipe should be inserted into the mailbox when pumping oil
Included:1 * Tools (delivered according to the type you choose)
Preview:

Description:
Description:This siphon pumps lets you quickly and easily transfer fuel, water or other liquids from one container to another.
The rubber squeeze pump generates quick suction to start the siphon.
For save and easy removal of fluids from car radiators and fuel tank.
Two 100cm long flexible PVC transparent pipes suitable and approved for use with petroleum-base.Pure copper interface, petrol resistant, avoid corrosion.
Material: rubber
Type: single air bag, 2 pipe clamps, 1 meter tube, oil absorber set 2 meters tube, oil absorber set 3 meters tube, oil absorber set 5 meters tube
Joint: pure copper
Usage:1, single-handedly took on both ends of the pipe, and another hand continuous pinched black suction air bags, tell the wind blow out a head, a head is the oil outlet, and no gas blowing out a head is the oil inlet. (identify the oil outlet)
2. Put the inlet into the fuel tank and the outlet into the oil bucket, and control the distance between the pipe and the height difference between the inlet and outlet; (the pipe is thin enough to reach most of the car's fuel tank. The pipe is transparent and soft enough to control the flow.)
3, after step need to be aware that just began to smoke when need a hand to hold the oil outlet, squeezing suction air bag with one hand, such as gas suction inlet section pipe full (inlet to air a), of oil outlet, and gasoline will follow the artesian pipe to tank, basic don't need to go straight to knead airbags.
Warm tips:The oil in the fuel tank of the car needs to be pumped
1. There is no oil extraction filter net in the oil tank
2. The pipe should be inserted into the mailbox when pumping oil
Included:1 * Tools (delivered according to the type you choose)
Preview:

Description:
Specification:Brand new
Composition: food grade silicone grease
Feature:Food grade silicone fat.
Environment friendly, non-toxic, odorless.
Good waterproof seal.
Good lubricity and low friction coefficient.
High and low temperature resistant, -50 ~ 230 degrees.
Has no corrosion to contact metal and non-metal materials.
For O-ring seal lubrication.
Used for O-ring maintenance of aquarium filter tank / carbon dioxide and other equipment.
Can be used in a variety of toys at home, flashlight. Lubrication and sealing of valve O-ring / seal.
Convenient to use
Package include:1 x silicone grease lubricant
Note:Item color displayed in photos may be slightly different on your computer monitor since monitors are not calibrated same.
Preview:

Description:
Specifications:
Material: Copper
Color: Copper
Height: 6.3 cm
Bottom width: 2.2 cm
Mouth width: 1.4cm
Package includes:
1 x Siphon connector
Note:
Transition: 1cm=10mm=0.39inch
Please allow 0-3mm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Preview:

Description:
This is just for A model,if you want B model,please note us~
100% Brand New and High quality.
Colour: White
Rated voltage: DC3V or 4.5V (3-6V can work)
Load-free rated current: less than 0.05A
Unloaded spitting volume: 100L/H
Lift: 3V specification lift 0.35m,
5V Specification Lift 0.55M
Rated current at load: 0.18A
Usage: Diving type
Use of fluids: tap water, groundwater, seawater,
Water temperature: - 20 C ~ 50 C
Environmental humidity: 45% -90%
Line length: 1m
Suitable for use of 6mm inner diameter water pipe
Package include: 1*Mini submersible pump
Note:Please allow 1-2cm errors due to manual measurement
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same

Description:
Description:This siphon pumps lets you quickly and easily transfer fuel, water or other liquids from one container to another.
The rubber squeeze pump generates quick suction to start the siphon.
For save and easy removal of fluids from car radiators and fuel tank.
Two 100cm long flexible PVC transparent pipes suitable and approved for use with petroleum-base.Pure copper interface, petrol resistant, avoid corrosion.
Material: rubber
Length of inlet and outlet pipe: The inlet pipe is about 1.5 meters, and the outlet pipe is about 0.5 meters.
Joint: pure copper
Usage:1, single-handedly took on both ends of the pipe, and another hand continuous pinched black suction air bags, tell the wind blow out a head, a head is the oil outlet, and no gas blowing out a head is the oil inlet. (identify the oil outlet)
2. Put the inlet into the fuel tank and the outlet into the oil bucket, and control the distance between the pipe and the height difference between the inlet and outlet; (the pipe is thin enough to reach most of the car's fuel tank. The pipe is transparent and soft enough to control the flow.)
3, after step need to be aware that just began to smoke when need a hand to hold the oil outlet, squeezing suction air bag with one hand, such as gas suction inlet section pipe full (inlet to air a), of oil outlet, and gasoline will follow the artesian pipe to tank, basic don't need to go straight to knead airbags.
Warm tips:The oil in the fuel tank of the car needs to be pumped
1. There is no oil extraction filter net in the oil tank
2. The pipe should be inserted into the mailbox when pumping oil
Included:1 * Hose Liquid Transfer Manual Silicone Sucker Pump
Preview: