Jelforrások és kondicionálás

Features:
Adopt premium electronic components, with stable working performance
The inner equipped with frequency sweep control signal, and the center frequency is adjustable
Modularization is more consistent and stable than discrete components, the main VCO module has a cover with strong anti-interference
Low phase noise, and with function of external control of frequency
Small power consumption, help save electricity
Specification:
Working voltage (VCC): 6-12 V internal voltage regulator circuit
Operating current: <120 (depending on the output power)
Oscillation frequency: 2400 ~ 2500MHz adjustable
Frequency control: 5KHz
Output interface: SMA_KE @ 50Ω
RF output power: 18dBm@2.45GHz
Type (Optional): 88-108M, 433M, 1575MGPS, 2450MWIFI, 5800M
Size: 5.3*5.1*1cm/2.1*2*0.4in
Weight: Approx.15g/0.5oz
Package list:
1 x Sweep Signal Source

Features:
This is a 5M-5GHz RF signal amplifier with 19dB gain.
It has big dynamic range and wide operating frequency range.
The power supply voltage is 5VDC, and working current is 85mA.
Maximum output power is P1db 19dBm at 2GHz.
It is suitable for fixed gain amplification of radio frequency signal.
Specification:
Power Supply Voltage: Typical 5V (typical current 80mA)
Gain: Typical 19dB@2G
Input Output Impedance: 50Ω
Maximum Output Power: P1db 19dBm (@2GHz)
Input Signal: < 10dBm (when > 10dBm, output signal has already been in distortion)
Bandwidth: 5M-5GHZ (gain will differ at different frequency, high gain flatness)
Noise Factor: 4.5dB@1GHz
Size: 7*3.2cm / 2.8*1.3in
Weight: 40g / 1.4oz (approx.)
Package list:1 * Amplifier
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:
High performance InGaP HBT MMIC amplifier utilize a Darlington configuration with an active bias .
The active bias provides stable current over temperature and process Beta variations.
Designed to run directly from a 5V supply, does not require a dropping resistor as compared to typical Darlington amplifiers.
The product is designed for high linearity 5V gain block applications that require small size and minimal external components.
It is internally matched to 50 Ω.
Specifications:
Power supply voltage: typical 5V (typical current value 75mA)
Gain: typical value 20dB @2G, input output impedance: 50 ohms
Maximum output power: P1db 20dBm (@2ghz
Input signal: < 10dBm (> 10dBm input signal has been distortion)
Bandwidth: 0.05-6Ghz (different frequencies of gain are different)
Noise coefficient: 4.1dB @1Ghz
Size: 3.2 x2.3cm/1.3 x 0.9 inch
Weight: 5g
File download:
http://pan.baidu.com/s/1bpCmfuf(Password:hcow)
Applications:PA Driver Amplifier
Cellular, PCS, GSM, UMTS
Wideband Intrumentation
Wireless Data, Satellite Terminals
Package Included:
1 x RF Amplifier
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:
This module can convert input power supply to 0-10V adjustable analog voltage output.
The maximum output current is about 10mA.
It can match most PLC and MCU or industrial controller analog interface standard.
This product cannot be used as a power supply module, only can be used as a analog voltage output generator.
Input power supply voltage should be at least 2V higher than output analog voltage , maximum power supply should be no more than 30V.
Specifications:Name: Voltage generator
Model: 0-10V
Wiring:
1, 15-32VDC: DC power supply positive
2, GND(left): Power supply negative
3, GND(right): Output voltage negative
4, VOUT: Output voltage positive
Weight: 50g(approx.)
Package Includes:
1 x Voltage Signal Generator

Noise Source Module DC12V/0.15A SMA Noise Source Board Low Heat for Industrial
Features:
The output frequency range of 1.5GHz, the output impedance default 50 ohms.
The transistor constant current source to drive the noise diode to produce a wide range of noise sources, the output noise spectrum is more density and more balanced.
Low power consumption and heat, 9-12V @ 0.15A power supply, anti-power reverse protection, LED instructions.
0.2M-1.5GHZ within the very high level flatness.
100% brand new and high quality.
Specifications:Output Frequency Range: 1.5GHz
Output Impedance Default: 50 ohms
Power Supply: DC12V/0.15A
Output Connect: SMA
Size: Approx. 55 x 47mm / 2.17 x 1.85inch
Weight: 15g
Please note:
This is a circuit board without case.
The circuit board will become heat when used. You need to pay attention to heat dissipation, and can add heat sinks on the back.
Package include:1 x 1.5GHz Noise Source

Features:
24W, 3-12V voltage regulation .
With LED digital display, real-time display voltage value, easy to operate, simple.
Wide range of applications: can be used for monitoring, LED lights, electric fans, micro drills, instruments, set-top boxes, routers, small TVs, access control, digital devices, mobile DVDs, etc.
Good anti-interference performance, stable output, and good service life.
Multiple protection, including: overshoot protection, overvoltage protection, short circuit protection, overcurrent protection, LED light display, electromagnetic protection.
Specification:Plug type: US Plug
Material: ABS
Color: Black
Interface: 5.5*2.1mm, 5.5*2.5mm universal
Input: AC 100-240V 50/60HZ
Output: DC3V-12V, 100-2000MA
Size: Approx. 9 * 5 * 3 cm / 3.5 * 2.0 * 1.2 in (adapter)
Weight: Approx. 139 g
Package list:1 * Power Adapter

This is a 6 in 1 power adapter, which can replace your other chargers and save your space. 6 DC plugs (maximum 12V output) to fit your different devices. Multiple safety protections ensure you safe charging.
Features:1. Worldwide universal AC input voltage of 100-240V.
2. Great anti-interference performance, reliable and useful.
3. Small DC ripple, high efficiency.
4. Low working temperature and long service life.
5. Small size, high power density.
6. Excellent insulation and high resistance to electricity.
7. Short circuit & over load & over voltage protection.
Specifications:Color: Black
Material: ABS PC Fireproofing Marterial
Rated Power: 12W
Input Voltage: AC100-240V 0.25A 50/60Hz
Output Voltage: 3V/4.5V/5V/6V/7.5V/9V/12V
USB Output: 5.0V 1.2A
Power Cable Length: 1.2m
DC Plug Size: 2.5*0.7mm, 3.0*1.1mm, 3.5*13.5mm, 3.5*15mm, 5.0*2.1mm, 5.5*2.5mm
AC Plug Type: US
Applicable Products:LED display, LED light, communication products, monitoring security equipment, mini TV, hard disk box, instrumentation, small appliances, notebooks, electric cars, electric toys, routers, switches, PDAs, wall washers, spotlights , phantom lights, soft light strips, backlight groups, large-scale lighting murals, outdoor photo advertising billboards and other lighting paintings, magic light boxes, ultra-thin light boxes, electronic displays, electronic flashing cards, fiber optic lighting, Digital light source and other products.
Size: 6.5 * 4 * 4 cm / 2.6 * 1.6 * 1.6in
Weight: Approx. 112-118g
Package List:1 * 12W Power Adapter
6 * DC Tips
1 * Plectrum
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

Features:
24W, 3-24V voltage regulation design.
Adjust 3-24V voltage in real time. The design has a knob that allows you to easily adjust to achieve speed control.
Wide range of applications: can be used for monitoring, LED lights, electric fans, micro drills, beauty instruments, set-top boxes, routers, small TVs, access control, digital devices, mobile DVDs, etc.
Good anti-interference performance, stable output, and good service life.
Multiple protection, including: overshoot protection, overvoltage protection, short circuit protection, overcurrent protection, LED light display, electromagnetic protection.
High efficiency, fast charging, low power consumption.
Specification:Plug type: EU Plug
Material: ABS
Color: Black
Interface: 5.5*2.1mm, 5.5*2.5mm universal
Input: AC 100-240V 50/60HZ
Output: DC 3V-24V, 100-2000mA
Size: Approx. 85 * 48 * 32 mm / 3.3 * 1.9 * 1.3 in (adapter)
Weight: Approx. 143 g
Package list:1 * Power Adapter

Signal Generator 4~20mA Constant Current Analog Simulator Adjusting Module Part
Features:
Input voltage reverse polarity protection protects the current signal generator from being burned by reverse connection.
Adopting wirewound potentiometer to achieve current adjustment to avoid the sudden change of resistance and other problems that caused by the general carbon film potentiometer.
Comes with an ammeter probe to give precise values.
It responds and outputs immediately with no delay after adjustment.
Universally suitable for signal source generation, valve regulation, inverter control, etc.
Specifications:Product type: 4-20mA Signal Generator
Material: ABS
Input power supply: DC5-28V
Current range: 4-20mA
Input voltage reverse polarity protection: Support
Package size: approx. 10.2 * 6 * 6 cm/ 4.0 * 2.4 * 2.4 in
Package weight: 114g/ 4.0oz
Package List:1 * 4-20mA Signal Generator
1 * Adapter

Features:
72W, 24-36V voltage regulation design.
The design has a knob that allows you to easily adjust to achieve speed control.
Wide range of applications: can be used for monitoring, LED lights, electric fans, micro drills, beauty instruments, set-top boxes, routers, small TVs, access control, digital devices, mobile DVDs, etc.
Good anti-interference performance, stable output, and good service life.
Multiple protection, including: overshoot protection, overvoltage protection, short circuit protection, overcurrent protection, LED light display, electromagnetic protection.
High efficiency, fast charging, low power consumption.
Specification:Plug type: US Plug, EU Plug (optional)
Material: ABS
Color: Black
Interface: 5.5*2.1mm, 5.5*2.5mm universal
Input: AC 100-240V 50/60HZ
Output: DC 24V-36V, 100-2000mA
Size: Approx. 9.8 * 4.8 * 3.4 cm / 3.9 * 1.9 * 1.3 in (adapter)
Weight: Approx. 154 g
Package list:1 * Power Adapter

Features:
The adjustable output voltage is low to 1.2V.
The typical linear adjustment rate is 0.01% .
The typical load adjustment rate is 0.1% .
80dB ripple inhibition ratio.
Output short circuit protection.
Overheating and overheating protection.
Adjust the safety work zone protection.
Standard three terminal transistor encapsulation.
Voltage range LM117/LM317 1.25V to 37V continuously adjustable. Negative pressure -1.25~-37V
Power supply positive and negative 3~40V Schottky low voltage differential diode counter protection
Output short circuit protection
The output voltage can be adjusted manually
Specification:
Model: LM317/337
Power supply voltage:±3~40V
Voltage range: 1.25V ~ 37V ,-1.25~ -37V
Weight: Approx.22g/0.8oz
Package list:
1 x Stabilizing Power Module

Features:
1. Made of high quality imported material, high performance transformer and special circuit.
2. The anode and cathode can be converted. Output voltage is 3v/4.5v/6v/7.5v/9v/12v adjustable.
3. Equipped with 6 DC power adapters, meet your needs.
4. Long service life, not easy to damage, you can use for a long time.
5. Wide application: suitable for recording audio player, telephone, , VCD player, repeater, walkie-talkie, computer, electronic organ, game machine, small TV set, and care equipment, computer electronic instrument, etc.
Specification:
Current: DC 3A
Power: 30W
Input: AC 100/240V
Output: DC 3/4.5/6/7.5/9/12 V
Plug Type: US standard
Package List:
1 x Power Adapter
6 x DC Plugs

Features:1. Made of high quality imported materials, high performance transformers and special circuits.
2. Output voltage can be selected: 3V/4.5V/6V/7.5V/9V/12V.
3. Positive and negative are convertible.
4. With 6 DC power connectors to meet your needs.
5. Suitable for recording players, telephones, CDs, VCD machines, repeaters, walkie-talkies, computers, electronic organ, game consoles, small TV sets, health care equipment, computer electronics, etc.
Specification:Current: DC 2.5A
Power: 30W
Input: AC 100 / 240V AC
Output: DC 3, 4.5, 6, 7.5, 9, 12 V
Number of plug: 6 different plugs
Plug type: EU Plug
Size: about 80*50*35mm/3.15*1.97*1.38in
Package List:1 * Power Adapter
6 * DC Connectors

Bandpass Filter BPF Anti-interference 2.45G 433M 1575M 900M 1090M Band Pass GL
Features:
100% brand new and high quality
A band-pass filter is a device that allows a particular frequency band to block other frequencies simultaneously.
The filter has the characteristics of low insertion loss, high resistance band rejection and high image attenuation, high power tolerance, low cost and miniaturization.
Convenient debugging, good selectivity and stability
With high reliability, stable and reliable working performance
Specification:
Passband: 10M
Center frequency:433M
Insertion loss: < 3 db
Input power: < 0.2w
Interface: SMA - K
Weight: Approx.6g/0.2oz
Package list:
1 x band-pass filter

Plastic Intelligent Single Channel DC12V Power Supply On/OFF 2 Key Interlock DD
Feature:1. Wide range of applications, suitable for garage door control, lighting control, remote control curtain, entrance guard system.
2. Working mode can interlocked, remote control distance: 50-100 meters.
3. Made of high quality plastic material, sturdy, durable and long service life.
4. Small size and lightweight, easy to carry and store, convenient to use.
5. Professional manufacturing, stable characteristics and high reliability.
Specification:
Condition: 100% Brand New
Item Type: Remote Control
Material: Plastic
Color: As Pictures Shown
Working Voltage: DC6V(2016 Button Battery)
Working Frequency: 315MHZ/433MHZ（Default 315MHZ)
Chip Type: 1527 or 2264(Batch Different and Different)
Encoding Type: Millions Coding or Bonding Pad as Password
Oscillation Resistance: 4.7（Default）
Modulation Mode: ASK（Stable Less Interference）
Remote Control Distance: 50-100 Meters
Remote Control Battery Material: Manganese Battery
Remote Control Battery Capacity: 230mAh
Module Parameter
Working Voltage: AC85-220AC
Working Mode: Inching, Self Locking, Interlock
Working Temperature: -40~ 85℃
Receive Sensitivity: -105dBm
Maximum Load: 1000W
Working Frequency: 433mhz
Weight: Approx. 73g
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Remote Control
1 x DC12V Power Supply

Feature:
1. The photoelectric dual engine can be powered by solar energy, and can also use batteries, and a mixed power supply mode.
2. The LED display screen is beautiful and generous, and the temperature display is clearer.
3. The aluminum particle probe on the back makes the temperature measurement more accurate.
4. Transparent projection , the viewing angle is bigger and wider.
5. Comes with adhesive, firm paste, easy to place.
Specification:
Condition: 100% Brand New
Item Type: Aquarium Thermometer
Material: plastic
Color: As picture shown
Diameter: Approx. 7cm/2.8in
Weight: Approx. 45g
Instructions for use: Long press the button for 3 seconds to between Celsius and Fahrenheit.
Product use: all kinds of aquarium
Temperature measurement accuracy: ± 0.5 ℃
Battery: 1 x cell battery LR44 (160mAh) (with battery)
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Aquarium Thermometer
Note:
1. Do not put it in the water, just stick it outside the fish tank and use it.
2. There are two screws after tearing the back adhesive, and the battery can be replaced when opened.

Features:
This is a low distortion, wide dynamic range single-chip mixer.
Applied to RF-IF downconversion in HF and VHF receivers, second mixer in DMR base stations, DC baseband conversion, quadrature modulation and demodulation, and detection in Doppler shift imaging applications.
The mixer is located after the low noise amplifier (LNA) and directly processes the LNA amplified RF signal.
Low insertion loss, good frequency mixing effect.
Wide operating frequency range 5-1900MHz.
Specification:
Condition: Brand New
Item Type: Frequency Mixer
Model: RMS-11
Operating Frequency: 5-1900Mhz
Size: 45x45mm / 1.77x1.77in
Package List:
1 x Frequency Mixer

Features:
The mixer has the advantage of high isolation
The passive mixers adopt mini components design,compact and light weight
Passive Mixer has low conversion loss of 8.5 dB
GaAs Schottky diode and novel in-plane transformer chip barron structure are used.
It can be used as up-converter, down-converter, two-phase modulator and demodulator or phase comparator.
Specification:
Conversion loss: 8.5db
LO to RF isolation: 40 dB
LO to IF isolation: 35dB.
Frequency range, RF and LO: 1.5-4.5GHz
Frequency range, IF: dc-1.5GHz
1dB gain compression (input) : 8dBm
IP3 (input) : 18dBm
Weight: Approx.10g/0.4oz
Package list:
1 x Passive Mixer

Features:
This is an electronic power supply module that incorporates a switching regulator to convert electrical power efficiently.
It transfers power from AC100V~240V(50HZ/60HZ) source to DC 36V.
Suitable for industrial electrical power supply, also suitable for equipment power supply when space is small but the equipment needs high power.
It supports over voltage protection, over current protection and short circuit protection.
Designed with two heat sinks for better heat dissipation.
Specification:Over Current Protection: Yes
Over Voltage Protection: Yes
Short Circuit Protection: Yes
AC Input: Universal AC 100-240V
AC Frequency: 50HZ / 60HZ
Output Voltage: DC 36V
Output Current: 5-6.5A (Without any voltage drop)
Output Power: 180W (Maximum 220W)
Size: 11.5 x 6.5 x 3.5cm / 4.53 x 2.56 x 1.38inch
Package Weight: 205g
Quantity: 1pc
Package included:1 x Power Supply Module

Description:This power adapter adopts 9-24V/3-12V/4-24V output and multi-level protection to ensure the stability and smoothness of charging with super low interference. Built-in LED lets you see voltage clearly, thus helping you control real-time condition of power adaptation. And adjustable voltage of 9-24V/3-12V/4-24V makes it suitable for different devices and different situations.
Features:Efficient Power Adaptation - Super low interference and stable voltage help achieve highly efficient power adaptation.
Multi-level Protection - Overcurrent protection, overvoltage protection and overload protection, short-circuit protection ensure the stability and smoothness. Gives a safe charging.
LED Display - A built-in LED displays real-time voltage, which helps you control real-time condition of charging.
Adjustable Voltage - The power adapter supply adopts adjustable voltage of 9-24V/3-12V/4-24V to make it suitable for different charging devices and different situations.
Long Service Life - High temperature resistant material and ultrasonic welder make it very durable and reliable. Lengthens its service life.
Specifications:Product type: Adjustable Power Adapter
Output voltage: 9-24V 3A, 3-12V 5A, 4-24V 1.5A for your choice
Input voltage: AC110-240V
Output power: 72W
Plug: US plug
Material: ABS
Package size: approx. 15 * 10 * 5 cm/ 5.91 * 3.94 * 1.97 in
Package weight: 200g
Package List:1 * Adjustable Power Adapter

Description:This power adapter adopts 9-24V/3-12V/4-24V output and multi-level protection to ensure the stability and smoothness of charging with super low interference. Built-in LED lets you see voltage clearly, thus helping you control real-time condition of power adaptation. And adjustable voltage of 9-24V/3-12V/4-24V makes it suitable for different devices and different situations.
Features:Efficient Power Adaptation - Super low interference and stable voltage help achieve highly efficient power adaptation.
Multi-level Protection - Overcurrent protection, overvoltage protection and overload protection, short-circuit protection ensure the stability and smoothness. Gives a safe charging.
LED Display - A built-in LED displays real-time voltage, which helps you control real-time condition of charging.
Adjustable Voltage - The power adapter supply adopts adjustable voltage of 9-24V/3-12V/4-24V to make it suitable for different charging devices and different situations.
Long Service Life - High temperature resistant material and ultrasonic welder make it very durable and reliable. Lengthens its service life.
Specifications:Product type: Adjustable Power Adapter
Output voltage: 9-24V 3A, 3-12V 5A, 4-24V 1.5A for your choice
Input voltage: AC110-240V
Output power: 72W
Plug: US plug
Material: ABS
Package size: approx. 15 * 10 * 5 cm/ 5.91 * 3.94 * 1.97 in
Package weight: 200g
Package List:1 * Adjustable Power Adapter

Feature:1. Noise source, generate noise, can be used as spectrum tracking source, interference source.
2. With a special voltage-regulator tube, white noise is generated in the breakdown state, and then amplified. Directly replace the tracking source.
3. The noise ratio is ENR, which is a multiple of the noise source exceeding the standard noise temperature T0 thermal noise.Here we mean that the signal differential between the spectrum is not connected to the noise source and the noise source is connected.
4. The reference ENR of the generator is 0.1G/60DB 0.5G/55DB,1G/52DB,1.5G/48DB 2G/38DB 2.5G/30DB,3G/27DB,3.5G/20DB.
5. Powered by DC12V power source,very convenient.
Specification:
Item Type:Noise Signal Generator
Power:DC12V 0.3~1A
Output Connector:SMA
Reference ENR:0.1G/60DB 0.5G/55DB,1G/52DB,1.5G/48DB 2G/38DB 2.5G/30DB,3G/27DB,3.5G/20DB.
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Noise Signal Generator

Features:
2 sine wave and 2 squarewave output.
After the 20-30MHz frequency harmonics increases, the waveform will be less and less clean.
Low-pass filter with 70MHz, so the waveform better than SN.
DA produced the benchmark pin (PIN12) leads for easy adjustment to do the magnitude of the output waveform application.
Comparator reference input voltage generated by the variable resistor, the resistor can be adjusted duty cycle squarewave of different.
AD9850 module adopts 125MHz crystal oscillator
Specifications:
AD9850: 0-40MHz.
Wave: 0-1MHz
Size: 4.5 x 2.5cm/1.7 x 0.9inch
Weight:10g
Package Included:
1 x AD9850 Signal Generator Module

Features:
Passive double-balanced mixer, 8-pin -mount plastic package (MsOP).
Passive mixers use GaAs Schottky diodes and novel planar transformer on-chip balun structures.
It can be used as up-converter, down-converter, two-phase modulator and demodulator or phase comparator.
The mixer has the advantage of high isolation
The passive mixers adopt mini components design,compact and light weight
Passive Mixer has low conversion loss of 8.5dB
Specification:
Shell material: CNC aluminum alloy
Model: HMC213 module
Conversion loss: 8.5db
LO to RF isolation: 40dB
LO to IF isolation: 35dB
Frequency range, RF and LO: 1.5-4.5G
Frequency range, IF: DC-1.5G
1dB gain compression (input) : 8dBm
IP3 (input) : 18dBm
Weight: Approx.46g/1.7oz
Package list:
1 x Passive Mixer

Description:This link is KIT parts (NOT welding yet)
Demo video:Commonly used signal Demo
Servo Signal Demo
Sweep Fuction Demo
Features:1. Generating continuous waveforms of Sine, , , Ramp (up and down), and Staircase (up and down).
2. Generating user defined arbitrary waveforms (AWG).
3. Generating frequency sweeping signals of selected waveforms. Start frequency, stop frequency, and sweep rate can be independently set.
4. Generating servo test/control signals in micro-second resolution with user programmable pulse width, amplitude, and cycle.
5. Setting of frequency (or period), amplitude, and offset is done with digits - quick and straightforward.
6. Variable duty cycle from 1% - 100% for signal.
7. Frequency (period), amplitude, and offset can be incrementally adjusted with rotary encoder.
8. Incremental step size can be set to any value. Very convenient for quickly adjust frequency/cycle around a certain point or over a range.
9. Trigger input available.
10. Synchronous output available for sweeping mode.
11. Settings are memorized after power down.
12. Can be used as an adjustable DC voltage source by setting frequency to 0.
Specification:Frequency range: 0 - 200KHz (Sine)
Frequency resolution: 1Hz
Maximum frequency error (CW mode): 0.1490Hz for F > 40Hz, 0.000596Hz for F <= 40Hz
Maximum frequency error (Sweep mode): 0.1490Hz
Amplitude range: 0 - 10V peak-to-peak
Amplitude resolution: 0.1V
Offset range: -5V - 5V
Offset resolution: 40mV
Memory depth: 256 bytes
Sample rate: 2.5Msps
Trigger input level: High - 3.5V (min), Low - 1.5V (max)
Output delay at trigger: < 5us (when no panel operation)
Sync Output Level: 5V TTL
Output impedance: 50 ohm
Power supply voltage: DC 15V (maximun 16V DC)
Current comsuption: < 150mA (without loading)
Dimension: 155 X 55 X 30 mm
Package includes:1 x FG085 Digital Function Generator Kit Parts
1 adapter(EU Plug)
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Feature:1. The transistor constant current source drives the noise diode to generate a broadband noise source, which makes the output noise spectrum more dense and balanced, more flat amplitude.
2. Noise generator's improved greatly reduces power consumption and heat generation.
3. With anti-power reverse connection protection, signal generator supports LED indicator.
4. Insufficient power can be added with a broadband RF amplifier module for higher gain flat.
5. Built to strict quality control standards, signal generator is improved for higher practical adoptability.
Specification:
Item Type: Signal generator
Output Frequency Range: 1.5GHz
Output Impedance Default: 50Ω
Power Supply: 9-12V at 0.16A
Very High Level Flatness Inner: 0.2M-1.5GHZ
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Signal Generator

Features:1. Small size, full-featured, easy to operate and easy to carry.
2. It can be powered by an adapter or a lithium battery.
3. Together with the oscilloscope, it can be used for electronic circuit testing and debugging, frequency characteristics of audio amplifiers and testing and measurement of impulse response.
4. Due to the good accuracy and frequency stability of DDS, it is also very suitable for oscilloscope scanning time factor calibration.
5. The wave output is suitable for oscilloscope attenuator and probe pulse characteristic adjustment.
Specification:Frequency range: sine wave: 1Hz-500kHz
other waveforms: 1Hz-20kHz
Resolution: 1 Hz
Output waveform: sine wave, wave, wave, forward sawtooth wave, reverse sawtooth wave
Sine wave distortion: <1% below 1 kHz, <0.5% above 1 kHz.
Output amplitude: maximum ± 10V (P-P)
Output impedance: 50 ohms
DC offset: maximum ±10V, with shutdown function
Power: DC3.5-10V(It is recommended to use DC5V when using the adapter and 3.7V lithium battery when the battery is powered.)
Size: about 22 x 15 x 5cm/8.66 x 5.91 x 1.97in
Package List:1 x Function Generator
1 x Data Line .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

Features:
Made of high quality material, compact structure, durable in use.
It is ultra-thin, light in weight and comfortable to hold.
High strength plastic gear, feel clear when rotating.
Driver output, strong anti-interference ability.
Optical rotary encoder, the signal output without vibration, non-contact detection, long service life.
Wide voltage design effectively prevents current breakdown.
The handheld pulse generator used on CNC machine tools, very convenient to use.
Specification:Material: Aluminum alloy
Weight: 187g/6.6oz
Color: Silver
Voltage: 5V
Pulse: 100
Output Mode:L: Differential Output
C: Open Collector Output
E: Voltage Output
Outer Diameter: 60mm/2.4inch
Thickness: 12.5mm/0.5inch
Output Line
Power Voltage DC (V)
Current Consumption
(mA)
Output Voltage
Rise time (ns)
Fall time (ns)
Response Frequency
(kHz)
Vh (V)
Vl (V)
Output Voltage
5
≤ 50
>VCC-0.5
≤ 0.2
≤ 500
≤ 500
20
Output Voltage
5 ± 5%
≤ 50
>VCC-0.5
≤ 0.2
≤ 500
≤ 500
20
Open Collector Output
5
≤ 50
>VCC-0.5
≤ 0.2
≤ 500
≤ 500
20
Differential Output
5 ± 5%
≤ 50
>3.5
≤ 0.2
≤ 500
≤ 500
20
Package List:1 x CNC Rotary Encoder
Note:1. Please allow slight error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Feature:1. The product improves the shortcomings of the traditional linear power supply, which is bulky and inefficient, and has a high safety factor.
2. NPS-W series is a three-window display micro DC power supply, which can display voltage, current and power at the same time.
3. The output voltage and current of the product can be controlled and adjusted by coarse and fine adjustment potentiometers respectively.
4. The product provides more convenience and accuracy for the adjustment of voltage and current.
5. The power supply is featured with high quality material, good performance and sturdy appearance.
Specification:
Item Type: DC stabilized power supply
Model: NPS605W 3digits
Input Voltage: AC 230V/115V±10% : 50Hz/60Hz
Working Temperature: 0℃~40℃
Relative Humidity: <80% RH
Storage Temperature: -10℃~70℃
Relative Humidity: <70% RH
Output: 0-60v / 0-5A
Ripple Voltage: Vpp<1%
Overall Efficiency: >89% .
The Header Shows:0.4 inch red three digital display
Display Resolution: 0.1V/0.01A.
Display Accuracy: 0.5% ±3 digits
Larger input voltage range in 230V±10% 50Hz
(Can be customized to 115V ± 10% 60Hz).wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x DC Stabilized Power Supply
1 x Crocodile Clip Test Line
1 x Power Line
1 x User Manual

Features:
32V 6A voltage and current output, single output
4 Digit LED Displays, display voltage and current, clear and easy to understand, easy to operate
Features over-voltage, over current, over temperature protection
Independent output switch, and operation buttons can be locked
Constant voltage, constant current, low ripple noise, low drift.
The over- voltage and over-current protection value can be set
Specification:
Brand: UNI-T
Model: UTP1306S
Input voltage: AC220V
Plug type: EU plug
Output voltage: 32v
Output current: 6A
Output power:192W
Load regulation voltage: <0.3% 5mV
Current: < 0.2% 3 mA
Power regulation voltage: <0.3% 5mV
Current: < 0.2% 3 mA
Set resolution voltage: 10mV
Current resolution: 1 mA
Voltage resolution: 10mV
Setting accuracy
Voltage (25 ℃± 5 ℃) : < 0.5% 5 mv
Current: < 0.2% 3 mA
Ripple noise
(20Hz~20MHz) voltage: no more than 10mVrms
Current: 2 or less
Temperature coefficient of the voltage: 300 PPM or less / ℃
Current: 300 PPM or less / ℃
Power supply voltage AC 110V/220V(switchable)±10%
Frequency: 50 hz / 60 hz
Size:15*23*8cm/5.9*9.1*3.1in
Weight: Approx.1901g/67.1oz
Package list:
1 x DC Stabilized Power Supply
1 x Power cable
Note: Please kindly make a note if you need any plug adapter.

Feature:1. Small and portable, can be grasped by one hand, easy to carry, save more space for the workbench.
2. With current limit protection, short circuit alarm and self-recovery function
3. Creating a quiet working environment, when the internal temperature of the power supply reaches a certain temperature, the fan will automatically turn on
4. Using high-quality materials, strong and durable, has a long service life
5. With strict quality control and quality assurance, high safety factor, can be used with peace of mind
Specification:
Item Type: Adjustable DC Power Supply
Model: NPS3010W 3-digits
Input Voltage: AC 230V/115V±10% : 50Hz/60Hz
Working Temperature: 0℃~40℃
Relative Humidity: <80% RH
Storage Temperature: -10℃~70℃
Relative Humidity: <70% RH
Output: 0-30v / 0-10A
The Header Shows:
0.4 inch red 3 digital display
Display Resolution: 0.1V/0.01A.
Display Accuracy: 0.5% ± 3-digits
Larger input voltage range in 230V±10% 50Hz range
(Can be customized to 115V ± 10% 60Hz)
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Adjustable DC Power Supply
1 x Clip Test Line
1 x Power Cord
1 x User Manual

Feature:1. The power supply is small and portable, easy to carry, and saves more space for the workbench.
2. Current limit protection/short circuit alarm can stop output for self-recovery.
3. The product can create a quiet working environment, when the internal temperature of the power supply reaches a certain temperature, the fan automatically turns on.
4. The power supply provides protection for the circuit and is safe for use.
5. The product is featured with high quality material, good performance and sturdy appearance.
Specification:
Item Type: DC stabilized power supply
Model: NPS3010W 4digits
Input Voltage: AC 230V/115V±10% : 50Hz/60Hz
Working Temperature: 0℃~40℃
Relative Humidity: <80% RH
Storage Temperature: -10℃~70℃
Relative Humidity: <70% RH
Output: 0-30v / 0-10A
The Header Shows: 0.4 inch red four digits display
Display Resolution: 00.01V/0.001A.
Display Accuracy: 0.5% ±3 digit
Larger input voltage range in 230V±10% 50Hz
(Can be customized to 115V ± 10% 60Hz)
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x DC Stabilized Power Supply
1 x Crocodile Clip Test Line
1 Line
1 x User Manual

Description:
Description:
Type: tool
Power Supply: 7V - 12V Power Input.
Resolutions: 640*480 800*600 1024*768 1280*1024
Size: 5.6cm (length)*4.2cm (width)
Package Included:
1*Signal Generator
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.
Preview:

XR2206 Function Signal Generator DIY Kits Sine Triangle Square Output 1Hz-1MHz
Description
Features:
These are all the parts, it need your own welding and installation
Color:As the picture
Size: approx. 12 * 8 * 2 cm / 4.72 * 3.15 * 0.8in
Weight: about 68 grams
Package included: 1*Signal Generators
Description:
Power: 9-12V DC input
Waveform:square, sine and triangle
Impedance: 600 ohms, 10%
Frequency: 1Hz - 1MHz
SINE WAVE amplitude: 0V to 3V, 9V DC input
Distortion:less than 1% (1kHz)
Flatness: 0.05dB 1Hz - 100kHz
Square wave Amplitude: 8V at 9V DC input (no load)
Rise time: less than 50ns (1kHz)
Fall time:less than 30ns (1kHz)
Symmetry: less than 5% (1kHz)
Triangle wave amplitude: 0V to 3V, 9V DC input
Linearity:less than 1% (up to 100kHz)
Can produce sine waves, triangle waves, square waves.
2. The frequency can be from 1HZ-1MHZ.
3. The frequency and amplitude are adjustable.
4. Five-digit precision resolution.
5. The frequency adjustment has coarse adjustment and fine adjustment.
6. Wide power supply range, can use external power supply 9-12V or 9V battery.
7. All inline components, small number of components, easy to install and debug.
Package contains:
1 X XR2206 Function Signal Generat suite
Preview:

Description:This signal generator DIY kit is professional product to generate sine/triangle/square/forward and reverse sawtooth wave. It's a DIY kit for you to weld and install.
Features:Uses ICL8038 and high-speed op amp, higher accuracy.
LCD display to indicate the data accurately.
Can output sine/triangle/square/forward and reverse sawtooth waveforms.
Frequency Range: 5Hz400kHz; Duty Cycle Range: 295% (Adjustable)
Supports dual power amplifier without blocking the capacitor to ensure high and low frequency signal distortion.
Adjustable frequency and amplitude.
Frequency adjustment features coarse tuning and fine tuning.
All are through hole components, easy to install.
Specifications:Material: FR4 Acrylic
Supply Voltage: 12V15V
Frequency Range: 5Hz400KHz(Adjustable)
Duty Cycle Range: 295% (Adjustable)
Low Distortion Sine Wave: 1%
Low Temperature Drift: 50ppm / °C
Output Triangular Wave Linearity: 0.1%
DC Bias Range: -7.5V7.5V
Output Amplitude Range: 0.1V11VPP(operating voltage 12V)
Board Size: Approx. 7.8 * 5cm / 3.07 * 1.97in
Finished Product Size: Approx. 8.7 * 6 * 1.7cm / 3.43 * 2.36 * 0.67in
Product Weight: 81g / 2.86oz
Package Size: Approx. 11 * 7 * 3cm / 4.33 * 2.76 * 1.18in
Package Weight: 95g / 3.35oz
Note:The testing picture is just for reference, please in kind prevail!
Package List:E4114
1 * Signal Generator DIY Kit
1 * User Manual(English)
Preview:

Details:
* The waveform generator is a digital signal generator for digital frequency and amplitude modulation
* 100% Brand new and high quality
* This waveform generator can generate square wave, Sawtooth wave, sine wave and triangular wave
* By changing the connection on PCB , you can choose the waveform as you wanted
* Easy to use and operate
Parameter:
* Input: DC6~12V(suggested 9V)
* Color Ring Resistor: 1KΩ, 1MΩ,4.7KΩ, 10KΩ,15KΩ, 100KΩ
* Monolithic Capacitor: 0.01uF, 0.1uF
* Ceramic Capacitor: 0.01uF, 0.1uF, 0.047uF
* Electrolytic Capacitor: 4.7uF
* Diode: 1N4007
* Adjustable Resistor: 50KΩ
* Triode: 9013
* IC: NE555
* Pin: 2P
Package contents:
1* Waveform Generator DIY Kits
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Multi-Channel Waveform Generator Module Sine Sawtooth Kits Accessories Part New
Details:
* The waveform generator is a digital signal generator for digital frequency and amplitude modulation
* 100% Brand new and high quality
* This waveform generator can generate square wave, Sawtooth wave, sine wave and triangular wave
* By changing the connection on PCB , you can choose the waveform as you wanted
* Easy to use and operate
Parameter:
* Input: DC6~12V(suggested 9V)
* Color Ring Resistor: 1KΩ, 1MΩ,4.7KΩ, 10KΩ,15KΩ, 100KΩ
* Monolithic Capacitor: 0.01uF, 0.1uF
* Ceramic Capacitor: 0.01uF, 0.1uF, 0.047uF
* Electrolytic Capacitor: 4.7uF
* Diode: 1N4007
* Adjustable Resistor: 50KΩ
* Triode: 9013
* IC: NE555
* Pin: 2P
Package contents:
1* Waveform Generator DIY Kits
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Multi-Channel Waveform Generator Module Sawtooth DIY Kits 2 Pin Wave Useful New
Details:
* The waveform generator is a digital signal generator for digital frequency and amplitude modulation
* 100% Brand new and high quality
* This waveform generator can generate square wave, Sawtooth wave, sine wave and triangular wave
* By changing the connection on PCB , you can choose the waveform as you wanted
* Easy to use and operate
Parameter:
* Input: DC6~12V(suggested 9V)
* Color Ring Resistor: 1KΩ, 1MΩ,4.7KΩ, 10KΩ,15KΩ, 100KΩ
* Monolithic Capacitor: 0.01uF, 0.1uF
* Ceramic Capacitor: 0.01uF, 0.1uF, 0.047uF
* Electrolytic Capacitor: 4.7uF
* Diode: 1N4007
* Adjustable Resistor: 50KΩ
* Triode: 9013
* IC: NE555
* Pin: 2P
Package contents:
1* Waveform Generator DIY Kits
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

NE555 12V Multi-Channel Waveform Generator Module Sine Square Wave DIY Supply
Details:
* The waveform generator is a digital signal generator for digital frequency and amplitude modulation
* 100% Brand new and high quality
* This waveform generator can generate square wave, Sawtooth wave, sine wave and triangular wave
* By changing the connection on PCB , you can choose the waveform as you wanted
* Easy to use and operate
Parameter:
* Input: DC6~12V(suggested 9V)
* Color Ring Resistor: 1KΩ, 1MΩ,4.7KΩ, 10KΩ,15KΩ, 100KΩ
* Monolithic Capacitor: 0.01uF, 0.1uF
* Ceramic Capacitor: 0.01uF, 0.1uF, 0.047uF
* Electrolytic Capacitor: 4.7uF
* Diode: 1N4007
* Adjustable Resistor: 50KΩ
* Triode: 9013
* IC: NE555
* Pin: 2P
Package contents:
1* Waveform Generator DIY Kits
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Multi-Channel Waveform Generator Square Sawtooth DIY 2 Pin Wave NE555 Useful
Details:
* The waveform generator is a digital signal generator for digital frequency and amplitude modulation
* 100% Brand new and high quality
* This waveform generator can generate square wave, Sawtooth wave, sine wave and triangular wave
* By changing the connection on PCB , you can choose the waveform as you wanted
* Easy to use and operate
Parameter:
* Input: DC6~12V(suggested 9V)
* Color Ring Resistor: 1KΩ, 1MΩ,4.7KΩ, 10KΩ,15KΩ, 100KΩ
* Monolithic Capacitor: 0.01uF, 0.1uF
* Ceramic Capacitor: 0.01uF, 0.1uF, 0.047uF
* Electrolytic Capacitor: 4.7uF
* Diode: 1N4007
* Adjustable Resistor: 50KΩ
* Triode: 9013
* IC: NE555
* Pin: 2P
Package contents:
1* Waveform Generator DIY Kits
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

1Hz~150kHz 1* Signal Generator PWM Pulse Frequency Adjustable Equipment
Item Details:
*100% Brand new and high quality
*LCD display frequency and duty cycle, very clear, PWM output, can be set to the frequency and duty cycle.
*Serial communication, TTL level.
*Frequency is divided into four ranges, automatic switching.
*All set parameters, power-down automatically saved.
*Easy to use.
*Long service life.
*Used as square wave signal generator for experimental development.
*Used as square wave signal generator for motor driver.
*Used as adjustable pulse generator for MCU.
*Used as pulse generator, control related circuits (PWM dimming, speed regulating)
Specification:
*Size: approx. 80*44*27mm
*Working Voltage: DC 3.3V~30V
*Frequency Range: 1Hz~150kHz (divided into 4 ranges)
*Frequency Precision: 2% of each range
*Signal Load Capacity: output current is about 5-30mA
*Output Amplitude: PWM amplitude equal to the input voltage value
*Environment Temperature Range: -20~ 70degree Celsius
*Duty Cycle Range: 0-100%
Package Contents:
1*Signal Generator
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Details:
High quality and brand new
Voltage Supply: 9-12V DC Input
Waveforms: Square, Sine & Triangle
Impedance: 600 Ohm 10%
Frequency: 1Hz - 1MHz
SINE WAVE
Amplitude: 0 - 3V at 9V DC input
Distortion: Less than 1% (at 1kHz)
Flatness: 0.05dB 1Hz - 100kHz
SQUARE WAVE
Amplitude: 8V (no load) at 9V DC input
Rise Time: Less than 50ns (at 1kHz)
Fall Time: Less than 30ns (at 1kHz)
Symmetry: Less than 5% (at 1kHz)
TRIANGLE WAVE
Amplitude: 0 - 3V at 9V DC input
Linearity: Less than 1% (up to 100kHz) 10mA
Package Contents:
1 * XR2206 Function Generator DIY Kit Sine, Triangle, Square Output 1HZ-1MHZ Case
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

XR2206 Signal Generator Module DIY Kit Output 1Hz-1MHz Adjustable Frequency Set
Details:
High quality and brand new
Voltage Supply: 9-12V DC Input
Waveforms: Square, Sine & Triangle
Impedance: 600 Ohm 10%
Frequency: 1Hz - 1MHz
SINE WAVE
Amplitude: 0 - 3V at 9V DC input
Distortion: Less than 1% (at 1kHz)
Flatness: 0.05dB 1Hz - 100kHz
SQUARE WAVE
Amplitude: 8V (no load) at 9V DC input
Rise Time: Less than 50ns (at 1kHz)
Fall Time: Less than 30ns (at 1kHz)
Symmetry: Less than 5% (at 1kHz)
TRIANGLE WAVE
Amplitude: 0 - 3V at 9V DC input
Linearity: Less than 1% (up to 100kHz) 10mA
Package Contents:
1 * XR2206 Function Generator DIY Kit Sine, Triangle, Square Output 1HZ-1MHZ Case
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

DIY Function Generator XR2206 Set Sine Triangle Square Outputs 1HZ-1MHZ Case
Details:
High quality and brand new
Voltage Supply: 9-12V DC Input
Waveforms: Square, Sine & Triangle
Impedance: 600 Ohm 10%
Frequency: 1Hz - 1MHz
SINE WAVE
Amplitude: 0 - 3V at 9V DC input
Distortion: Less than 1% (at 1kHz)
Flatness: 0.05dB 1Hz - 100kHz
SQUARE WAVE
Amplitude: 8V (no load) at 9V DC input
Rise Time: Less than 50ns (at 1kHz)
Fall Time: Less than 30ns (at 1kHz)
Symmetry: Less than 5% (at 1kHz)
TRIANGLE WAVE
Amplitude: 0 - 3V at 9V DC input
Linearity: Less than 1% (up to 100kHz) 10mA
Package Contents:
1 * XR2206 Function Generator DIY Kit Sine, Triangle, Square Output 1HZ-1MHZ Case
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Signal Generator Adjustable Square wave Digital 1Hz-150KHz Useful Durable
Item Details:
*100% Brand new and high quality
*With LCD LCD display frequency and duty cycle, very clear, PWM output, can set frequency and duty cycle separately
*Wide frequency range and high precision;
*Serial communication
*PWM output, can set the frequency and duty cycle separately
*The frequency is divided into four ranges and automatically switched:1.XXX (no decimal point): The minimum unit is 1 Hz, and the value ranges from 1 Hz to 999 Hz.
2.X.XX (the decimal point is in the hundredth place) The minimum unit is 0.01Khz, and the value range is 1.00Khz~9.99Khz;
3.XX.X (decimal point is ten): the minimum unit is 0.1Khz; the value range is 10.0KHz~99.9KHz
4.X.X.X (decimal point in ten and hundred): the minimum unit is 1Khz; the value range is 1KHz~150KHz
E.g. Frequency display: 100 means PWM output 100Hz pulse;
1.01 indicates that the PWM outputs a pulse of 1.01K;
54.1 indicates that the PWM outputs a pulse of 54.1 kHz;
1.2.4 indicates that the PWM output is a pulse of 124KHz;
*The duty ratio ranges from 0 to 100% ;
*All setting parameters, save power
*The module has 4 separated buttons, which are used to set the frequency and duty ratio. It supports short press (increase or decrease one unit) and long press (fast increase or decrease). It is very simple, and the parameters are automatically saved after setting. Not lose if power off
Specification:
*Voltage: 3.3~30V;
*Frequency range: 1Hz~150KHz
*Frequency accuracy: the accuracy in each range is about 2%
*Signal load capacity: The output current can be around 5~30ma
*Output amplitude: The PWM amplitude is equal to the power supply voltage
*Ambient temperature: -20~ 70degree Celsius
*Scope of application:1. Used as a square wave signal generator, generate a square wave signal for experimental development
2. Used to generate a square wave signal that controls the motor driver
3. Generate adjustable pulses for MCU
4. Generate adjustable pulses, control related circuits (PWM dimming, speed control and other applications)
Package Contents:
1*Signal Generator
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

1x Adjustable Step Up Boost Converter Power Module 10-32V To 12-35V 10A Replace
Product description:
Module attribute: non-isolated boost module
Application range:1. DIY an output adjustable car power supply, connect 12V input, the output can be 14-35V (freely adjustable), but the output voltage cannot be less than the input voltage.
2. Car laptop power supply: Connect to a 12V power supply, and adjust the output voltage according to the needs of the laptop.
Product parameters:
Product size: 65 * 56.5 * 23MM
Input voltage: 10-32V
Output voltage: 12-35V (adjustable)
Output current: 6A (maximum)
Input current: 10A (maximum) (if greater than 10A, please enhance heat dissipation)
Output power: natural cooling 100W (MAX), enhanced heat dissipation 150W (MAX)
Easy-to-drive 65W 90W dual-core laptop.
Use 12V battery to drive 19V 3.42A laptop, the module temperature is about 45°c
Conversion efficiency: 94% (measured at input 16V, output 19V 2.5A)
Output ripple: 2% (maximum) 20M bandwidth
Working temperature: industrial temperature (-40°C to 85°C) (the ambient temperature exceeds 40°C, reduce power consumption or enhance heat dissipation)
Full load temperature rise: 45°c
No-load current: 25mA typical
Voltage adjustment rate: ±0.5%
Dynamic response speed: 5% 200uS
Short circuit protection: None (please install a fuse and a protection circuit on the input port.)
Input reverse polarity protection: None (Please connect a diode in series with the input port.)
Includes brass bracket.
Package list:
1 *power module
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Power module Replacement 1pcs DC-DC Adjustable Step Up Boost Converter
Product description:
Module attribute: non-isolated boost module
Application range:1. DIY an output adjustable car power supply, connect 12V input, the output can be 14-35V (freely adjustable), but the output voltage cannot be less than the input voltage.
2. Car laptop power supply: Connect to a 12V power supply, and adjust the output voltage according to the needs of the laptop.
Product parameters:
Product size: 65 * 56.5 * 23MM
Input voltage: 10-32V
Output voltage: 12-35V (adjustable)
Output current: 6A (maximum)
Input current: 10A (maximum) (if greater than 10A, please enhance heat dissipation)
Output power: natural cooling 100W (MAX), enhanced heat dissipation 150W (MAX)
Easy-to-drive 65W 90W dual-core laptop.
Use 12V battery to drive 19V 3.42A laptop, the module temperature is about 45°c
Conversion efficiency: 94% (measured at input 16V, output 19V 2.5A)
Output ripple: 2% (maximum) 20M bandwidth
Working temperature: industrial temperature (-40°C to 85°C) (the ambient temperature exceeds 40°C, reduce power consumption or enhance heat dissipation)
Full load temperature rise: 45°c
No-load current: 25mA typical
Voltage adjustment rate: ±0.5%
Dynamic response speed: 5% 200uS
Short circuit protection: None (please install a fuse and a protection circuit on the input port.)
Input reverse polarity protection: None (Please connect a diode in series with the input port.)
Includes brass bracket.
Package list:
1 *power module
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Accessory Power module Parts Replacement 1pcs Adjustable Converter New
Product description:
Module attribute: non-isolated boost module
Application range:1. DIY an output adjustable car power supply, connect 12V input, the output can be 14-35V (freely adjustable), but the output voltage cannot be less than the input voltage.
2. Car laptop power supply: Connect to a 12V power supply, and adjust the output voltage according to the needs of the laptop.
Product parameters:
Product size: 65 * 56.5 * 23MM
Input voltage: 10-32V
Output voltage: 12-35V (adjustable)
Output current: 6A (maximum)
Input current: 10A (maximum) (if greater than 10A, please enhance heat dissipation)
Output power: natural cooling 100W (MAX), enhanced heat dissipation 150W (MAX)
Easy-to-drive 65W 90W dual-core laptop.
Use 12V battery to drive 19V 3.42A laptop, the module temperature is about 45°c
Conversion efficiency: 94% (measured at input 16V, output 19V 2.5A)
Output ripple: 2% (maximum) 20M bandwidth
Working temperature: industrial temperature (-40°C to 85°C) (the ambient temperature exceeds 40°C, reduce power consumption or enhance heat dissipation)
Full load temperature rise: 45°c
No-load current: 25mA typical
Voltage adjustment rate: ±0.5%
Dynamic response speed: 5% 200uS
Short circuit protection: None (please install a fuse and a protection circuit on the input port.)
Input reverse polarity protection: None (Please connect a diode in series with the input port.)
Includes brass bracket.
Package list:
1 *power module
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Input 24V AC PCB Board Adjustable Red 2mA-3A DC Regulated DIY 84*84mm Stock
Details:
* DC regulated power supply whose output voltage is continuously adjustable from 0 to 30V.
* Including a circuit to limit output current which enables output current to be continuously adjustable from 2mA to 3A.
* Providing current limiting, LED display, over load and short circuit protection.
* Input Voltage: 24V AC
* Input Current: Max 3A
* Output Voltage: 0-30V (continuously adjustable)
* Output Current: 2mA-3A (continuously adjustable)
* Output Voltage Ripple: Max 0.01%
* Material: PCB
* PCB Dimensions: approx. 84*84mm
Package contents:
1* Power Supply DIY Kit
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness