Elemzők és adatgyűjtés

Features:
1. BNC plug with standardized design is applicable for all oscilloscope.
2. Wrapped with PVC material, insulated, eco-friendly and beautiful.
3. With dual lightweight and flexible alligator clips, easy to connect the circuit and hard to fall.
4. Strict workmanship ensures its good performance and long durability.
5. Ideal accessory for school, electronic factory, electrical laboratory, etc.
Specification:
Material: PVC Metal
Quantity: 2pcs
Color: As pictures show
Total Length: 0.5m / 19.7in
Weight: Approx. 59g/2.1oz
Package List:
2 x BNC Plug Oscilloscope Test Probe Cable
Note:
1. Due to the difference between monitors and light effect, the pictures may not reflect the actual color of the item. Please take the real one as standard.
2. Please allow slight error due to manual measurement. Thanks for your understanding.

Descriptions:
This probe is good oscilloscope accessories, compact size, several functions combined in one, this probe is convenient to use.This probe is 100MHz ,with a switch for either 1x or 10x attenuation, stable performance. And providing several accessories designed to make probing and measurements a simple task.
Features:
This probe is 100MHz Oscilloscope probes with a switch for either 1x or 10x attenuation.
Compact size, several functions combined in one, this probe is convenient to use.
Detachable hook tip, the hook is well protected by the plastic case.
Locating sleeves the stability and reliability of the tip exposed to the test point.
Marker rings in different colors help to identify different channels.
Features stainless steel interface, stable performance,with CE certification, IEC1010 standard ,great choice for oscilloscope probe.
Specifications:
Model: P6100
Attenuation ratio: 1X/10X
Input resistance: 1 M Ω / 10MΩ
Input capacitance: 1X:85pF~120pF,10X:18.5pF~22.5pF
Compensation range: 10pF~30pF
System bandwidth: 1X: DC-6Mhz, 10X: DC-100Mhz
Input voltage: 1X: < 300VDC AC Vp-p,10X: < 600VDC AC Vp-p
Operating temperature range: 15 ℃ ~ 75 ℃
Not working temperature range: - 20 ℃ ~ 60 ℃
Process: injection molding integration
Color:grey
Cable length: 120cm/47.2inch
Humidity: less than 85% (relative humidity)
Weight:126g
Package Included:
2 x Oscilloscope Probes
1 x adjust tool
2 x tip locating sleeve
8 x color circle

Descriptions:
This probe is good oscilloscope accessories, this probe is 60MHz ,with a switch for either 100x attenuation, stable performance. And providing several accessories designed to make probing and measurements a simple task.
Features:
This probe is a high voltage 2000V probe, band width is 60MHz
This high quality probe is used in professional test equipment, probe has a 1.2m cable with standard BNC end.
This probe is 60MHz Oscilloscope probes with a switch for either 100x attenuation.
This probe has stable performance, providing several accessories designed to make probing and measurements a simple task
Adjusting tool: adjusts compensation capacitance to assure the rapier match with oscillograph.
Compact size, several functions combined in one, this probe is convenient to use
Marker rings in different colors help to identify different channels.
Specifications:
Model: P4060
Attenuation ratio: 100X
Input resistance: 100 MΩ
Input capacitance: 100X:18.5pF~22.5pF
Compensation range: 15pF~45pF
System bandwidth: 10X: DC-60Mhz
Input voltage: 100X: 2000VDC AC Vp-p
Operating temperature range: 15 ℃ ~ 75 ℃
Not working temperature range: - 20 ℃ ~ 60 ℃
Process: injection molding integration
Color:black
Cable length: 120cm/47.2inch
Humidity: ≤85% (relative humidity)
Weight:84g
Package Included:
1 x Oscilloscope Probes
1 x adjust tool
2 x tip locating sleeve
4 pair x color circle
1 x spring circle

Features:
1. 100% brand new and high quality
2. Made of high quality material, durable and long service life
3. Small body and it can provide stable performance
4. The interface type is apc7mm flat to N female and it has good connecting.
5. Low power and the frequency range is DC-12Ghz
Specification:
Condition: 100% Brand New
Interface Type: apc7mm Flat to N Female
Characteristic Impedance: 50Ω
Frequency Range: DC-12Ghz
Rated Power: <5W
Product Material: Copper
Insulation Material: PTFE
Package List:
1 * Analyzer Test Connector

This U disk temperature recorder using high quality sensors, can record 32000 points. USB plug and play make it easy to read data. Applicable for refrigerated trucks, refrigerated package, cold storage, laboratory etc.
Features:1. High accuracy and large permanent data memory of 32000 points, record interval: 10s~24hour adjustable.
2. U disk design, USB socket can be directly connected to the computer. Data automatically uploaded, can export four kinds of report(Word/Excel/PDF/TXT).
3. After the recording points are used up, it can be reset to zero via software.
4. Two kinds of power supply, CR2032 battery(not included) or USB interface.
5. Mainly used for monitoring and recording the temperature data in foodstuff, medicine, chemicals and other products, especially widely used in all links of warehousing, logistics and cold chain, such as refrigerated containers, refrigerated trucks, refrigerated package, cold storage, laboratory, etc.
Specification:Condition:100% Brand New
Material: ABS
Color: As Pictures Shown
Temperature measuring range: -30 ℃~ 70 ℃; Resolution: 0.1 ℃
Accuracy: ±0.5 ℃(-20℃~ 40℃); others, 1 ℃
Temperature unit: ℃ or ℉optional
Record capacity: 32000 points (MAX)
Record interval: 10s~24hour adjustable
Sensor: Internal NTC thermal resistor
Communication interface: USB interface
Waterproof grade: IP67
Power supply: CR2032 battery/USB interface
Size: approx.75*33*13mm/3*1.3*0.5in
Weight: Approx.52g/1.8oz
Package list:
1 * Temperature Data logger(Not inlcuded Battery)
1 * User Manual
Note:1. Please allow 0~1 inch error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Portable Nylon Oxford Cloth Oscilloscope Bag Oscilloscope Case for DS203
Feature:1. It is a portable storage case tailored for miniDSO range of oscilloscopes. Can be compatible with a variety of host for DS203, DS211, DS212, DS213, LA104 and so on.
2. And designed a separate position for the host, the host and accessories are separately stored. In addition to the standard accessories, this storage bag can also be designed to accommodate ignition high voltage probes, data cables, chargers, etc.
3. Exquisite workmanship, reliable quality, easy to clean, can protect your instrument from scratches and damage.
4. Small in size, light in weight, take up no space, easy to carry, good protection.
5. Made of high quality Nylon Oxford cloth and EVA material, it is durable, wear resistant, corrosion resistant and anti-aging.
Specification:
Condition: 100% Brand New
Item Type: Storage Bag
Material: Nylon Oxford Cloth EVA
Color: Black
Size: Approx.225x176x68mm/8.9x6.9x2.7in
Weight: Approx.355g/12.5oz
Compatible Host: For DS203, DS211, DS212, DS213, LA104
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Storage Bag
Note:
1. Please allow 1-2cm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Feature:1. Spectrum analyzer signal source board can be simple to use and easy to install, practical.
2. The signal source of the dedicated spectrum analyzer is also equipped with a tracking function, which makes it more reliable to use.
3. Equipped with USB interface, such signal source board also supports power supply by USB.
4. Built to strict quality control standards, this RF frequency domain analysis tool is improved for more durability.
5. For practical adoptability, signal source module's high quality can keep its high performance for a long time.
Specification:
Item Type: Signal source module
Model: LTDZ_35-4400M
Attribute: RF frequency domain analysis tool
Interface: USB
Power Supply: USB
Standby Current: ≤100mA
Frequency Sweep Current: ≤350mA
Frequency Sweep Bandwidth: 33mHz --- 4400mHz
Turn on Tracking Source Output Bandwidth: 33mhz --- 3000mhz
Frequency Sweep Step: ≥ 33 ~ 68.75mHz / 125Hz, 68.75 ~ 137.5mHz / 250Hz, 137.5 ~ 275mHz / 500Hz, 275 ~ 550mHz / 1kHz, 550 ~ 1100mHz / 2kHz, 1100 ~ 2200mHz / 4kHz, 2200 ~ 4400mHz / 8kHz,
Frequency Sweep : ≥800 points / second
Frequency Sweep Dynamic Logarithmic Ratio:> 50dB
Separate Frequency or Frequency Sweep Output Power: ≈0 dBm
Input Detection: ≤10dbm
Background: ≈ -60dBm
Computer Side Software: NWT4.11.09 version
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Spectrum Analyzer Signal Source Board

Feature:1. The product has strict quality control and quality assurance.
2. The vector network analyzer is made of high-quality materials with fine workmanship.
3. The product is small in size and portable and convenient for installation.
4. The vector network analyzer can support the measurement frequency up to 300MHz.
5. The product is featured with high quality, durable appearance and long service life.
Specification:Item Type: Vector Network Analyzer
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Material: PCB
Colour: Black
Measurement Frequency: 50 KHz~300 MHz (50)
RF Output: -13dbm (maximum 9dbm)
Frequency Accuracy: <0.5ppm
Measurement Range: 70dB (50 KHz-300 MHz), (50dB (300 M-600 MHz), 40dB (600 M-900 MHz) (allows expansion of firmware)
SWR Port: <1.1
Screen: 2.8 Inch TFT (320 x 240)
USB Interface: USB Type-C
Communication Mode: CDC (serial)
USB: 5 V 300mA
Battery: 3.7V battery
Number of Calibration Points: 101 (Fixed)
Scanning Points: 101 (Fixed)
Monitor Monitoring: 4
Mark: 4
Battery Capacity: 450 mAh
Battery Type: Lithium battery
Package List:
1 x Host (with 450 mAh Battery)
1 x USB Type-C Data Cable
2 x 30mm SMA Male to Male RG174 RF Cable
1 x Simple Calibration Kit SMA
4 x Connector
1 x Lanyard
1 x Menu Structure Drawing

4.3" LCD NanoVNA-F Vector Network Antenna Analyzer 50KHz-
1000MHz VNA UHF VHF HF
Feature:1. Using4.3‑inch IPS TFT LCD resistive touch screen, it has a large viewing angle and can be seen clearly even in strong outdoor light.
2. Change the Lipo charging IC to IP5306 (with 2A high charging current), thereby shortening the charging time.
3. Use larger and better operating levels, larger and better power switch, more dependable.
4. Support Chinese and English menu switching, bring much convenience for you.
5. Upgrade the user program through a virtual U disk (internal 16MB for SPI flash memory).
6. Standard aluminum casing protects the SMA head and reduces the interference of external electromagnetic waves on the instrument.
7. The measurement range of NanoVNA‑F is 50k‑1GHz. Use the harmonics of the clock chip SI5351 to measure frequencies up to 1000MHz. At 600M‑1GHz, the dynamic range of S11 is 40dB (VSWR is less than 1.02).
8. The RF front end is designed with metal shielding, so that the dynamic range of S21 in the entire frequency range is better than 60dB.
Specification:
Condition: 100% Brand New
Item Type: Networks Analyzer
Material: PCB
Color: Black
Measuring Frequency: 50KHz-1000MHz
RF Output: -13dBm (maximum -9dBm)
Frequency Accuracy: <0.5PPM
Port Swr: <1.1
Display: 4.3 Inches IPS TFT (800 x 480)
USB Interface: USB Type-C
Communication Method: CDC (serial)
Power Consumption: USB 5V 200mA,can be powered by battery, maximum charging current 2A
Output Capacity: 5V / 1A
Number of Calibration Points: 101
Scanning Points: 101
Display Tracking: 4, Mark: 4, Setting Save: 5
Scan Time: About 1.9s/time (50khz-1000mhz Full Frequency Band)
Application: Measure S parameters, voltage standing waves ratio SWR, phase map, group delay, Smith chart, etc.

Package List:
1 x Analyzer
2 x 200mm/7.9in SMA-JJ RG316 Cable
6 x Screw
1 x Data Cable
1 x Instruction

Description:
NanoVNA Testboard Sets/Demo Board Plate Vector Network Analyzer Testing Pc66 New
Item Details:
100% brand new and high quality
Made of high quality material, durable and practical to use
This test board kit is used for NanoVNA or other vector network analyzer user-friendly measurement plug-ins and SMT devices.
This test board contains a plug-in test circuit compatible with for VNWA Testboard, and a set of 0805 and 1206 patch test circuits are added. The SMT circuit cannot fully consider various test situations. Some parts of the test may need to be cut over. Hands-on ability is highly recommended. This circuit board is not soldered before delivery, please bring your own welding tools, please build a test circuit according to your test needs, our shop is not responsible for circuit guidance.
Note: Assembling is needed.
Package Contents:
1 x Testboard Printed Circuit Board
6 x SMA Female Connectors
4 x 6mm Copper Spacers
4 x M2.5 Screws
2 x 40-pin Round Row Seats
2 x 0805 49R9 Calibration Resistors
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
Preview:

NTc 10K Ohm Thermistor Sensor Thermistor Sensor Probe Accessories Useful Durable
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*5pcs NTC 10K Ohm 1% 3435 Thermistor Temperature Sensor Cylinder Probe 0.5M Wire
*The temperature sensor is used in household air conditioners, car air conditioners, refrigerators, freezers, water heaters, water dispensers, heaters, dishwashers, disinfection cabinets, washing machines, dryers, low temperature ovens, incubators, and other household appliances. For temperature sensors, intake air temperature sensors, engines
*Switching power supply, UPS uninterruptible power supply, inverter, electric boiler, etc., smart toilet, electric blanket, etc.
*High sensitivity, fast response, high resistance and B value, good interchangeability
*Copper Nickel Plated material to ensure thermal conductivity.
Specification:
*Measurement Range: -30 To 110 ° C
*Line Length: 1m(Approx.)
*Output: 2 Lines
*Type: NTC 10k±1% 3435
*Material: Copper Nickel Plated
*Color: Black Silver(As pictures show)
*Quantity: 5
Package Contents:
5*NTC 10K Ohm 1% 3435 Thermistor Temperature Sensor
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Thermistor Sensor Thermistor Sensor Wire Cylinder Accessories Useful Durable
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*5pcs NTC 10K Ohm 1% 3435 Thermistor Temperature Sensor Cylinder Probe 0.5M Wire
*The temperature sensor is used in household air conditioners, car air conditioners, refrigerators, freezers, water heaters, water dispensers, heaters, dishwashers, disinfection cabinets, washing machines, dryers, low temperature ovens, incubators, and other household appliances. For temperature sensors, intake air temperature sensors, engines
*Switching power supply, UPS uninterruptible power supply, inverter, electric boiler, etc., smart toilet, electric blanket, etc.
*High sensitivity, fast response, high resistance and B value, good interchangeability
*Copper Nickel Plated material to ensure thermal conductivity.
Specification:
*Measurement Range: -30 To 110 ° C
*Line Length: 1m(Approx.)
*Output: 2 Lines
*Type: NTC 10k±1% 3435
*Material: Copper Nickel Plated
*Color: Black Silver(As pictures show)
*Quantity: 5
Package Contents:
5*NTC 10K Ohm 1% 3435 Thermistor Temperature Sensor
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Thermistor Sensor Thermistor Sensor Probe Cylinder Accessories Industrial
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*5pcs NTC 10K Ohm 1% 3435 Thermistor Temperature Sensor Cylinder Probe 0.5M Wire
*The temperature sensor is used in household air conditioners, car air conditioners, refrigerators, freezers, water heaters, water dispensers, heaters, dishwashers, disinfection cabinets, washing machines, dryers, low temperature ovens, incubators, and other household appliances. For temperature sensors, intake air temperature sensors, engines
*Switching power supply, UPS uninterruptible power supply, inverter, electric boiler, etc., smart toilet, electric blanket, etc.
*High sensitivity, fast response, high resistance and B value, good interchangeability
*Copper Nickel Plated material to ensure thermal conductivity.
Specification:
*Measurement Range: -30 To 110 ° C
*Line Length: 1m(Approx.)
*Output: 2 Lines
*Type: NTC 10k±1% 3435
*Material: Copper Nickel Plated
*Color: Black Silver(As pictures show)
*Quantity: 5
Package Contents:
5*NTC 10K Ohm 1% 3435 Thermistor Temperature Sensor
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Thermistor Sensor 0.5M Wire Sensor Wire 5pcs Copper Nickel Plated Useful Durable
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*5pcs NTC 10K Ohm 1% 3435 Thermistor Temperature Sensor Cylinder Probe 0.5M Wire
*The temperature sensor is used in household air conditioners, car air conditioners, refrigerators, freezers, water heaters, water dispensers, heaters, dishwashers, disinfection cabinets, washing machines, dryers, low temperature ovens, incubators, and other household appliances. For temperature sensors, intake air temperature sensors, engines
*Switching power supply, UPS uninterruptible power supply, inverter, electric boiler, etc., smart toilet, electric blanket, etc.
*High sensitivity, fast response, high resistance and B value, good interchangeability
*Copper Nickel Plated material to ensure thermal conductivity.
Specification:
*Measurement Range: -30 To 110 ° C
*Line Length: 1m(Approx.)
*Output: 2 Lines
*Type: NTC 10k±1% 3435
*Material: Copper Nickel Plated
*Color: Black Silver(As pictures show)
*Quantity: 5
Package Contents:
5*NTC 10K Ohm 1% 3435 Thermistor Temperature Sensor
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Thermistor Sensor Thermistor Sensor 3435 Tempretaure Probe Accessories Practical
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*5pcs NTC 10K Ohm 1% 3435 Thermistor Temperature Sensor Cylinder Probe 0.5M Wire
*The temperature sensor is used in household air conditioners, car air conditioners, refrigerators, freezers, water heaters, water dispensers, heaters, dishwashers, disinfection cabinets, washing machines, dryers, low temperature ovens, incubators, and other household appliances. For temperature sensors, intake air temperature sensors, engines
*Switching power supply, UPS uninterruptible power supply, inverter, electric boiler, etc., smart toilet, electric blanket, etc.
*High sensitivity, fast response, high resistance and B value, good interchangeability
*Copper Nickel Plated material to ensure thermal conductivity.
Specification:
*Measurement Range: -30 To 110 ° C
*Line Length: 1m(Approx.)
*Output: 2 Lines
*Type: NTC 10k±1% 3435
*Material: Copper Nickel Plated
*Color: Black Silver(As pictures show)
*Quantity: 5
Package Contents:
5*NTC 10K Ohm 1% 3435 Thermistor Temperature Sensor
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

NanoVNA Testboard Kit Testing SMA Female Connectors Parts Demo Board New Durable
Item Details:
100% brand new and high quality
Made of high quality material, durable and practical to use
This test board kit is used for NanoVNA or other vector network analyzer user-friendly measurement plug-ins and SMT devices.
This test board contains a plug-in test circuit compatible with for VNWA Testboard, and a set of 0805 and 1206 patch test circuits are added. The SMT circuit cannot fully consider various test situations. Some parts of the test may need to be cut over. Hands-on ability is highly recommended. This circuit board is not soldered before delivery, please bring your own welding tools, please build a test circuit according to your test needs, our shop is not responsible for circuit guidance.
Note: Assembling is needed.
Package Contents:
1 x Testboard Printed Circuit Board
6 x SMA Female Connectors
4 x 6mm Copper Spacers
4 x M2.5 Screws
2 x 40-pin Round Row Seats
2 x 0805 49R9 Calibration Resistors
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Product description:
100% brand new and high quality
Made of high-quality materials, durable
Suitable for all our temperature controllers
The project has been well tested.
Allow thermocouples to be shaped and bent without breaking.
Working temperature: -100 – 1250degree Celsius
Probe material: stainless steel
Probe diameter: 8mm
Thread size: 3/8" NPT
Probe length: 50mm
Cable external shielding: stainless steel braid
Cable internal insulation: glass fiber
Connector: spade type
Package Included:
1 *K type thermocouple
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

1Pcs Glass Fiber Type Thermocouple Stainless Steel Braid Probe Sensor New
Product description:
100% brand new and high quality
Made of high-quality materials, durable
Suitable for all our temperature controllers
The project has been well tested.
Allow thermocouples to be shaped and bent without breaking.
Working temperature: -100 – 1250degree Celsius
Probe material: stainless steel
Probe diameter: 8mm
Thread size: 3/8" NPT
Probe length: 50mm
Cable external shielding: stainless steel braid
Cable internal insulation: glass fiber
Connector: spade type
Package Included:
1 *K type thermocouple
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Professional 3 Meters Thermocouple K Type 50mm Probe Sensor High Temperature
Product description:
100% brand new and high quality
Made of high-quality materials, durable
Suitable for all our temperature controllers
The project has been well tested.
Allow thermocouples to be shaped and bent without breaking.
Working temperature: -100 – 1250degree Celsius
Probe material: stainless steel
Probe diameter: 8mm
Thread size: 3/8" NPT
Probe length: 50mm
Cable external shielding: stainless steel braid
Cable internal insulation: glass fiber
Connector: spade type
Package Included:
1 *K type thermocouple
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

NanoVNA Testboard Kit Pc66 M2.5 Screws Accessories Demo Board Useful New
Item Details:
100% brand new and high quality
Made of high quality material, durable and practical to use
This test board kit is used for NanoVNA or other vector network analyzer user-friendly measurement plug-ins and SMT devices.
This test board contains a plug-in test circuit compatible with for VNWA Testboard, and a set of 0805 and 1206 patch test circuits are added. The SMT circuit cannot fully consider various test situations. Some parts of the test may need to be cut over. Hands-on ability is highly recommended. This circuit board is not soldered before delivery, please bring your own welding tools, please build a test circuit according to your test needs, our shop is not responsible for circuit guidance.
Note: Assembling is needed.
Package Contents:
1 x Testboard Printed Circuit Board
6 x SMA Female Connectors
4 x 6mm Copper Spacers
4 x M2.5 Screws
2 x 40-pin Round Row Seats
2 x 0805 49R9 Calibration Resistors
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

NanoVNA Testboard Sets Demo Board Plate Vector Network Analyzer Testing Pc66 HOT
Item Details:
100% brand new and high quality
Made of high quality material, durable and practical to use
This test board kit is used for NanoVNA or other vector network analyzer user-friendly measurement plug-ins and SMT devices.
This test board contains a plug-in test circuit compatible with for VNWA Testboard, and a set of 0805 and 1206 patch test circuits are added. The SMT circuit cannot fully consider various test situations. Some parts of the test may need to be cut over. Hands-on ability is highly recommended. This circuit board is not soldered before delivery, please bring your own welding tools, please build a test circuit according to your test needs, our shop is not responsible for circuit guidance.
Note: Assembling is needed.
Package Contents:
1 x Testboard Printed Circuit Board
6 x SMA Female Connectors
4 x 6mm Copper Spacers
4 x M2.5 Screws
2 x 40-pin Round Row Seats
2 x 0805 49R9 Calibration Resistors
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Kit Testboard Main Board Network Analysis SMA Female Head 6mm Copper Bolt New
Item Details:
*100% Brand new and high quality
*This test board contains a DIP test circuit compatible with the VNWA test board, and a set of patch test circuits 0805 and 1206 are added. The SMT circuit cannot fully consider various test conditions. Some parts of the test may need to be trimmed.
*This circuit board is not soldered before delivery, please bring your own soldering tools, create a test circuit according to your test needs
Package Contents:
1*Testboard Main Board
6*SMA Female Head
4*6mm Copper Bolt
4*M2.5 Screw
2*40-Pin Round Connectors
2*0805 49R9 Calibration Resistance
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Testboard Main Board VNA Vector Network Analysis Demo 6mm Copper Bolt New
Item Details:
*100% Brand new and high quality
*This test board contains a DIP test circuit compatible with the VNWA test board, and a set of patch test circuits 0805 and 1206 are added. The SMT circuit cannot fully consider various test conditions. Some parts of the test may need to be trimmed.
*This circuit board is not soldered before delivery, please bring your own soldering tools, create a test circuit according to your test needs
Package Contents:
1*Testboard Main Board
6*SMA Female Head
4*6mm Copper Bolt
4*M2.5 Screw
2*40-Pin Round Connectors
2*0805 49R9 Calibration Resistance
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

NanoVNA Testboard Kit Accessories Replacement Replaces Demo Board Pc66
Item Details:
100% brand new and high quality
Made of high quality material, durable and practical to use
This test board kit is used for NanoVNA or other vector network analyzer user-friendly measurement plug-ins and SMT devices.
This test board contains a plug-in test circuit compatible with for VNWA Testboard, and a set of 0805 and 1206 patch test circuits are added. The SMT circuit cannot fully consider various test situations. Some parts of the test may need to be cut over. Hands-on ability is highly recommended. This circuit board is not soldered before delivery, please bring your own welding tools, please build a test circuit according to your test needs, our shop is not responsible for circuit guidance.
Note: Assembling is needed.
Package Contents:
1 x Testboard Printed Circuit Board
6 x SMA Female Connectors
4 x 6mm Copper Spacers
4 x M2.5 Screws
2 x 40-pin Round Row Seats
2 x 0805 49R9 Calibration Resistors
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Kit Testboard Main Board VNA Vector Network Analyzer Demo 6mm Copper Bolt
Item Details:
*100% Brand new and high quality
*This test board contains a DIP test circuit compatible with the VNWA test board, and a set of patch test circuits 0805 and 1206 are added. The SMT circuit cannot fully consider various test conditions. Some parts of the test may need to be trimmed.
*This circuit board is not soldered before delivery, please bring your own soldering tools, create a test circuit according to your test needs
Package Contents:
1*Testboard Main Board
6*SMA Female Head
4*6mm Copper Bolt
4*M2.5 Screw
2*40-Pin Round Connectors
2*0805 49R9 Calibration Resistance
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Kit Digital Oscilloscope Case Cover Shell For DSO138 TFT Acrylic DIY SMD Durable
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*DIY cover for DSO138 oscilloscope.
*Acrylic material, looks transparent (need to tear off the film).
*Easy to assemble for electronic enthusiasts.
Specifications:
*Material: Acrylic
*Packing size: 16 * 10 * 4cm / 6.3 * 3.94 * 1.57 inches
Package Contents:
1 * DSO138 Shell
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

SMD Digital Oscilloscope Case Kit Cover Acrylic DIY Soldered Practical
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*DIY cover for DSO138 oscilloscope.
*Acrylic material, looks transparent (need to tear off the film).
*Easy to assemble for electronic enthusiasts.
Specifications:
*Material: Acrylic
*Packing size: 16 * 10 * 4cm / 6.3 * 3.94 * 1.57 inches
Package Contents:
1 * DSO138 Shell
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

USB Logic Analyzer Set Compatible To Saleae & 10*DuPont Line For ARM FPGA M100
Product description:
Support the latest Logic 1.1.16 Beta (new) software!
Logic analyzer supports at the same time: SALEAE and USBEE AX (only logic components)
You can switch through the software.
Logic analyzer detection method:1. Install the software;
2. Connect the logic analyzer to the PC;
3. Use DuPont cables to connect CH1 to CH7 to GND, and the corresponding channels are all low level after the software is collected, indicating that the logic analyzer is normal, but it is bad anyway.
Product parameters:
Product size: 50mm, X, 28mm, x, 14mm
Product weight: 50g (including SALEAE, USB cable and 10 DuPont cables)
Maximum sampling speed: 24Msps
Input voltage range: 0~5V
Digital channels: 8
Input low level: <0.8V
Input high level: >1.4V
Note: This logic analyzer requires a PC with a high-speed USB2.0 interface
Support protocol: SPI, IIC, UART, SMBus, I2S, CAN, Parallel, Custom, Search, Async, 1-Wite, PS/2
Package list:
1*Host
1*USB to T cable
10*DuPont line
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

USB Logic Analyzer Device Set Compatible To 24MHz 8CH W/ Cable For ARM FPGA M100
Features:
High quality and brand new
Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz
The logic for each channel sampling rate of 24M/s
General applications around 10M, enough to cope with a variety of occasions
8-Channel
Specification:
Voltage range:
Input voltage range: -0.5V to 5.25V
Input Low Voltage: -0.5V to 0.8V
Input High Voltage: 2.0V to 5.25V
Works with 5V, 3.3V, 2.5V, 2.0V systems.(May work with 1.8V but not recommended.)
Input Impedance: 1Mohm || 10pF (typical, approximate)
Crystal: /-20ppm, 24MHz
Error/Accuracy: Pulse-width measurement: /- 42ns (at 24MHz).
Package Contents:
1 * Logic Analyzer Device
1 * USB Cable
1 * Dupont Line
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

5pcs set LCD Thermometer Electronic Temperature Meter Practical Durable
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Digital LCD Thermometer For Aquarium Freezer H155 New
Modeling simple, elegant, LCD panels inline connections, moisture-resistant,
strong anti-interference, applies to refrigerated cabinets, display counters and other needs of temperature measurement and display of various equipment.
Specification:
Color: Black White(As pictures show)
Optional Length: 1 Meter, 2 Meter, 3 Meter, 5 Meter(Approx.)
Size: 47*28*14mm(Approx.)
Weight 22g(Approx.)
Power: 2*LR44 Button Battery(NOT Included)
Temperature Range: -50~ 110°C
Temperature Display Resolution: 0.1
Temperature Measurement Accuracy: ±1°C
Long Probe Line: 1 Meter Molded Case Probe
Working Voltage: 1.5V
Storage Temperature: -10-60°C
Product Usage:
(1) Measure the temperature inside and outside the car
(2) Measure the temperature inside and outside the air-conditioned room
(3) Measure the temperature inside and outside the refrigerator
(4) Measuring body temperature
(5) Measure the water temperature of the fish pond
(6) Measure the water temperature of the baby bath
Package Contents:
5* Digital LCD Thermometer (with Waterproof Probe, Battery NOT Included)
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

5pcs set LCD Thermometer Electronic Temperature Meter Practical Durable
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Digital LCD Thermometer For Aquarium Freezer H155 New
Modeling simple, elegant, LCD panels inline connections, moisture-resistant,
strong anti-interference, applies to refrigerated cabinets, display counters and other needs of temperature measurement and display of various equipment.
Specification:
Color: Black White(As pictures show)
Optional Length: 1 Meter, 2 Meter, 3 Meter, 5 Meter(Approx.)
Size: 47*28*14mm(Approx.)
Weight 22g(Approx.)
Power: 2*LR44 Button Battery(NOT Included)
Temperature Range: -50~ 110°C
Temperature Display Resolution: 0.1
Temperature Measurement Accuracy: ±1°C
Long Probe Line: 1 Meter Molded Case Probe
Working Voltage: 1.5V
Storage Temperature: -10-60°C
Product Usage:
(1) Measure the temperature inside and outside the car
(2) Measure the temperature inside and outside the air-conditioned room
(3) Measure the temperature inside and outside the refrigerator
(4) Measuring body temperature
(5) Measure the water temperature of the fish pond
(6) Measure the water temperature of the baby bath
Package Contents:
5* Digital LCD Thermometer (with Waterproof Probe, Battery NOT Included)
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

5pcs set LCD Thermometer Electronic Temperature Meter Practical Durable
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Digital LCD Thermometer For Aquarium Freezer H155 New
Modeling simple, elegant, LCD panels inline connections, moisture-resistant,
strong anti-interference, applies to refrigerated cabinets, display counters and other needs of temperature measurement and display of various equipment.
Specification:
Color: Black White(As pictures show)
Optional Length: 1 Meter, 2 Meter, 3 Meter, 5 Meter(Approx.)
Size: 47*28*14mm(Approx.)
Weight 22g(Approx.)
Power: 2*LR44 Button Battery(NOT Included)
Temperature Range: -50~ 110°C
Temperature Display Resolution: 0.1
Temperature Measurement Accuracy: ±1°C
Long Probe Line: 1 Meter Molded Case Probe
Working Voltage: 1.5V
Storage Temperature: -10-60°C
Product Usage:
(1) Measure the temperature inside and outside the car
(2) Measure the temperature inside and outside the air-conditioned room
(3) Measure the temperature inside and outside the refrigerator
(4) Measuring body temperature
(5) Measure the water temperature of the fish pond
(6) Measure the water temperature of the baby bath
Package Contents:
5* Digital LCD Thermometer (with Waterproof Probe, Battery NOT Included)
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

5pcs set LCD Thermometer Electronic Temperature Meter Practical Durable
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Digital LCD Thermometer For Aquarium Freezer H155 New
Modeling simple, elegant, LCD panels inline connections, moisture-resistant,
strong anti-interference, applies to refrigerated cabinets, display counters and other needs of temperature measurement and display of various equipment.
Specification:
Color: Black White(As pictures show)
Optional Length: 1 Meter, 2 Meter, 3 Meter, 5 Meter(Approx.)
Size: 47*28*14mm(Approx.)
Weight 22g(Approx.)
Power: 2*LR44 Button Battery(NOT Included)
Temperature Range: -50~ 110°C
Temperature Display Resolution: 0.1
Temperature Measurement Accuracy: ±1°C
Long Probe Line: 1 Meter Molded Case Probe
Working Voltage: 1.5V
Storage Temperature: -10-60°C
Product Usage:
(1) Measure the temperature inside and outside the car
(2) Measure the temperature inside and outside the air-conditioned room
(3) Measure the temperature inside and outside the refrigerator
(4) Measuring body temperature
(5) Measure the water temperature of the fish pond
(6) Measure the water temperature of the baby bath
Package Contents:
5* Digital LCD Thermometer (with Waterproof Probe, Battery NOT Included)
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Electronic LCD Thermometer Temperature Meter 1/2/3/5M Practical High quality
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Digital LCD Thermometer For Aquarium Freezer H155 New
Modeling simple, elegant, LCD panels inline connections, moisture-resistant,
strong anti-interference, applies to refrigerated cabinets, display counters and other needs of temperature measurement and display of various equipment.
Specification:
Color: Black White(As pictures show)
Optional Length: 1 Meter, 2 Meter, 3 Meter, 5 Meter(Approx.)
Size: 47*28*14mm(Approx.)
Weight 22g(Approx.)
Power: 2*LR44 Button Battery(NOT Included)
Temperature Range: -50~ 110°C
Temperature Display Resolution: 0.1
Temperature Measurement Accuracy: ±1°C
Long Probe Line: 1 Meter Molded Case Probe
Working Voltage: 1.5V
Storage Temperature: -10-60°C
Product Usage:
(1) Measure the temperature inside and outside the car
(2) Measure the temperature inside and outside the air-conditioned room
(3) Measure the temperature inside and outside the refrigerator
(4) Measuring body temperature
(5) Measure the water temperature of the fish pond
(6) Measure the water temperature of the baby bath
Package Contents:
5* Digital LCD Thermometer (with Waterproof Probe, Battery NOT Included)
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Electronic LCD Thermometer Temperature Meter 1/2/3/5M Practical High quality
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Digital LCD Thermometer For Aquarium Freezer H155 New
Modeling simple, elegant, LCD panels inline connections, moisture-resistant,
strong anti-interference, applies to refrigerated cabinets, display counters and other needs of temperature measurement and display of various equipment.
Specification:
Color: Black White(As pictures show)
Optional Length: 1 Meter, 2 Meter, 3 Meter, 5 Meter(Approx.)
Size: 47*28*14mm(Approx.)
Weight 22g(Approx.)
Power: 2*LR44 Button Battery(NOT Included)
Temperature Range: -50~ 110°C
Temperature Display Resolution: 0.1
Temperature Measurement Accuracy: ±1°C
Long Probe Line: 1 Meter Molded Case Probe
Working Voltage: 1.5V
Storage Temperature: -10-60°C
Product Usage:
(1) Measure the temperature inside and outside the car
(2) Measure the temperature inside and outside the air-conditioned room
(3) Measure the temperature inside and outside the refrigerator
(4) Measuring body temperature
(5) Measure the water temperature of the fish pond
(6) Measure the water temperature of the baby bath
Package Contents:
5* Digital LCD Thermometer (with Waterproof Probe, Battery NOT Included)
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Electronic LCD Thermometer Temperature Meter 1/2/3/5M Practical High quality
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Digital LCD Thermometer For Aquarium Freezer H155 New
Modeling simple, elegant, LCD panels inline connections, moisture-resistant,
strong anti-interference, applies to refrigerated cabinets, display counters and other needs of temperature measurement and display of various equipment.
Specification:
Color: Black White(As pictures show)
Optional Length: 1 Meter, 2 Meter, 3 Meter, 5 Meter(Approx.)
Size: 47*28*14mm(Approx.)
Weight 22g(Approx.)
Power: 2*LR44 Button Battery(NOT Included)
Temperature Range: -50~ 110°C
Temperature Display Resolution: 0.1
Temperature Measurement Accuracy: ±1°C
Long Probe Line: 1 Meter Molded Case Probe
Working Voltage: 1.5V
Storage Temperature: -10-60°C
Product Usage:
(1) Measure the temperature inside and outside the car
(2) Measure the temperature inside and outside the air-conditioned room
(3) Measure the temperature inside and outside the refrigerator
(4) Measuring body temperature
(5) Measure the water temperature of the fish pond
(6) Measure the water temperature of the baby bath
Package Contents:
5* Digital LCD Thermometer (with Waterproof Probe, Battery NOT Included)
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Electronic LCD Thermometer Temperature Meter 1/2/3/5M Practical High quality
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Digital LCD Thermometer For Aquarium Freezer H155 New
Modeling simple, elegant, LCD panels inline connections, moisture-resistant,
strong anti-interference, applies to refrigerated cabinets, display counters and other needs of temperature measurement and display of various equipment.
Specification:
Color: Black White(As pictures show)
Optional Length: 1 Meter, 2 Meter, 3 Meter, 5 Meter(Approx.)
Size: 47*28*14mm(Approx.)
Weight 22g(Approx.)
Power: 2*LR44 Button Battery(NOT Included)
Temperature Range: -50~ 110°C
Temperature Display Resolution: 0.1
Temperature Measurement Accuracy: ±1°C
Long Probe Line: 1 Meter Molded Case Probe
Working Voltage: 1.5V
Storage Temperature: -10-60°C
Product Usage:
(1) Measure the temperature inside and outside the car
(2) Measure the temperature inside and outside the air-conditioned room
(3) Measure the temperature inside and outside the refrigerator
(4) Measuring body temperature
(5) Measure the water temperature of the fish pond
(6) Measure the water temperature of the baby bath
Package Contents:
5* Digital LCD Thermometer (with Waterproof Probe, Battery NOT Included)
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

FOR WIFI Bluetooth Power Amplifier Broadband Accessories RF2126 Industrial
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*High frequency RF broadband power amplifier 1W high power 400M-2700M
*Power: 6V (maximum power output 500mA)
*Gain: 12DB 2450MHz
*Size(Including the protruding SMA interface)(L*W*H): 70mm * 50mm * 20mm(Approx.)
*Size(Excluding the protruding SMA interface)(L*W*H): 50mm * 50mm * 20mm(Approx.)
*P1dB = 30dB-1W 2450MHz (Default Transfer)
*Working Frequency: 400-2700MHz
*Input and Output Impedance: 50Ω
Package Contents:
1*RF Power Amplifier
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Universal DSO138 digital oscilloscope Set 12 Bits Accessory Parts Durable
Features:
*The DSO138 digital oscilloscope kit uses an ARM Cortex-M3 processor and has a 2.4-inch TFT screen.
*The circuit operation is simple and reliable. It can display frequency, period, pulse width, duty cycle, maximum/minimum/average/peak/peak/virtual value.
*The kit uses an ARM Cortex-M3 processor (STM32F103C8) and includes a 2.4-inch color TFT display that can be used as an ARM test development board.
*Secondary development can be carried out on the basis of this kit, for example, it can be changed to millivoltmeter, data logger.
*Adjustable vertical displacement, with instructions.
*With automatic, regular and single shot modes, it is easy to capture the torque waveform.
*Available rising or falling edge triggers.
*Observable previous trigger waveform (negative delay).
*The waveform display can be frozen at any time (hold function).
*With 1Hz/3.3V square wave test signal source.
*With digital display of waveform parameters, including frequency, period, pulse width, duty cycle, -max/min/average/peak-peak/virtual value.
*Waveform storage function: the waveform will not be lost after power off.
*Short circuit and open circuit detection: can help users find welding errors.
*TFT controller identification function.
Note: This DIY kit has been soldered.
Product parameters:
*Maximum real-time sampling rate: 1Msps
*Accuracy: 12 bits
*Sampling buffer depth: 1024 bytes
*Analog bandwidth: 0-200KHz
*Vertical sensitivity: 10mV / Div-5V / Div (1-2-5 level)
*Input impedance: 1MΩ
*Maximum input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
*Coupling mode: DC / AC / GND
*Horizontal time base range: 10ÎĽs/ div-50s / div (1-2-5 level)
*Power supply voltage: DC 9V
*PCB size: 117 * 76mm / 4.6 * 3in
*Screen size: 52 * 40mm / 2 * 1.57in
Package Included:
1*DSO138 digital oscilloscope
1*probe
1*User Manual
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

1pc Power Amplifier 400M-2700MHZ 2.4GHZ 12DB 2450MHz Broadband Industrial
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*High frequency RF broadband power amplifier 1W high power 400M-2700M
*Power: 6V (maximum power output 500mA)
*Gain: 12DB 2450MHz
*Size(Including the protruding SMA interface)(L*W*H): 70mm * 50mm * 20mm(Approx.)
*Size(Excluding the protruding SMA interface)(L*W*H): 50mm * 50mm * 20mm(Approx.)
*P1dB = 30dB-1W 2450MHz (Default Transfer)
*Working Frequency: 400-2700MHz
*Input and Output Impedance: 50Ω
Package Contents:
1*RF Power Amplifier
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Fully Welded Assembled DSO138 2.4" TFT Digital Oscilloscope (1Msps) Probe New
Product description:
This is welded (assembled) and can be used directly.
Functions of DSO138 oscilloscope production kit:Electronic product training, complete and detailed descriptive information (such as diagrams, instructions, etc.), make the success rate very high.
The diversity of component types is for students to identify elements, online element welding, and training on welding SMD components.
Students can simultaneously enter the practical tools for making audio, video synchronization, low-frequency switching power supply, infrared receiver transmitter signal waveforms and many other occasions to conduct effective observation and measurement, increase interest in learning, and improve learning results.
The kit uses the ARM Cortex-M3 processor (STM32F103C8) and includes a 2.4-inch color TFT display, which can be used as a test ARM development board.
The available resources and the abilities of friends can be based on the secondary development kit, for example, they can be changed to millivolt meters, data loggers, etc.
The circuit is simple, reliable, and inexpensive
Product parameters:
Maximum real-time sampling rate: 1Msps
Precision: 12 bits
Sampling buffer depth: 1024 bytes
Analog bandwidth: 0-200KHz
Vertical sensitivity: 10mV / Div-5V / Div (1-2-5 level)
Adjustable vertical displacement, with instructions
Input impedance: 1MΩ
Maximum input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
Coupling modes include DC / AC / GND
Horizontal time base range: 10ÎĽs/ div-50s / div (1-2-5 level)
With automatic, regular and single shot modes, easy to capture torque waveform
Available rising or falling edge trigger
Adjustable trigger level position with instructions
Trigger waveform that can be observed before (negative delay)
The waveform display can be frozen at any time (hold function)
Comes with 1Hz /3.3V square wave test signal source
Package includes:
1* DSO138 digital oscilloscope
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

1PC NEW DSO138 2.4 TFT Digital Oscilloscope Acrylic Case DIY Kit SMD Soldered
Product description:
This is welded (assembled) and can be used directly.
Functions of DSO138 oscilloscope production kit:Electronic product training, complete and detailed descriptive information (such as diagrams, instructions, etc.), make the success rate very high.
The diversity of component types is for students to identify elements, online element welding, and training on welding SMD components.
Students can simultaneously enter the practical tools for making audio, video synchronization, low-frequency switching power supply, infrared receiver transmitter signal waveforms and many other occasions to conduct effective observation and measurement, increase interest in learning, and improve learning results.
The kit uses the ARM Cortex-M3 processor (STM32F103C8) and includes a 2.4-inch color TFT display, which can be used as a test ARM development board.
The available resources and the abilities of friends can be based on the secondary development kit, for example, they can be changed to millivolt meters, data loggers, etc.
The circuit is simple, reliable, and inexpensive
Product parameters:
Maximum real-time sampling rate: 1Msps
Precision: 12 bits
Sampling buffer depth: 1024 bytes
Analog bandwidth: 0-200KHz
Vertical sensitivity: 10mV / Div-5V / Div (1-2-5 level)
Adjustable vertical displacement, with instructions
Input impedance: 1MΩ
Maximum input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
Coupling modes include DC / AC / GND
Horizontal time base range: 10ÎĽs/ div-50s / div (1-2-5 level)
With automatic, regular and single shot modes, easy to capture torque waveform
Available rising or falling edge trigger
Adjustable trigger level position with instructions
Trigger waveform that can be observed before (negative delay)
The waveform display can be frozen at any time (hold function)
Comes with 1Hz /3.3V square wave test signal source
Package includes:
1* DSO138 digital oscilloscope
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Replacement Cable Wires Cord Line Connectors Adapters Accessories Metal
Item Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* IEEE-488 GPIB cable with metal cover
* IEEE-48 GPIB (General Purpose Interface Bus)
* Heavy duty cable with metal connector
* Cable Color: Gray(As pictures show)
* Optional Length: 0.5m~5m
Package Contents:
1*IEEE-488 GPIB Cable
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

IEEE-488 Cable GPIB Wires Cord Connectors Adapters Accessories 0.5m-5m Line Gray
Item Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* IEEE-488 GPIB cable with metal cover
* IEEE-48 GPIB (General Purpose Interface Bus)
* Heavy duty cable with metal connector
* Cable Color: Gray(As pictures show)
* Optional Length: 0.5m~5m
Package Contents:
1*IEEE-488 GPIB Cable
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Replacement Cable Wires Cord Line Connectors Adapters Accessories Parts
Item Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* IEEE-488 GPIB cable with metal cover
* IEEE-48 GPIB (General Purpose Interface Bus)
* Heavy duty cable with metal connector
* Cable Color: Gray(As pictures show)
* Optional Length: 0.5m~5m
Package Contents:
1*IEEE-488 GPIB Cable
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

IEEE-488 Cable Wires Connectors Adapters Accessories 0.5m-5m 1pcs Gray
Item Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* IEEE-488 GPIB cable with metal cover
* IEEE-48 GPIB (General Purpose Interface Bus)
* Heavy duty cable with metal connector
* Cable Color: Gray(As pictures show)
* Optional Length: 0.5m~5m
Package Contents:
1*IEEE-488 GPIB Cable
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

ARM DSO138 Fully Welded TFT Digital Oscilloscope 1Msps Probe Kit Shell Assembly
Features:
* Component species diversity for students to identify elements ,inline elements welding, soldering SMD components training.
* Students can get in at the same time making a practical tool for audio, video synchronization , low-frequency switching power supply ,infrared receiver transmitter signal waveform and many other occasions.
* This set help effectively increase interest in learning, improve learning outcomes .
* Using ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4inch color TFT display can be used as test ARM development board .
* With automatic, regular and one-shot mode , easy to capture the moment waveform
* Available rising or falling edge trigger
* Adjustable trigger level position , and with instructions
* Observable trigger waveform before ( negative delay )
* Can freeze at any time waveform display (HOLD function )
* Comes 1Hz /3.3V square wave test signal source
* These need to be installed by yourselves.
Specifications:
* Power Output:DC 9V
* Maximum real-time sampling rate: 1Msps
* Accuracy: 12Bit
* Sampling buffer depth: 1024 bytes
* Analog bandwidth: 0-200KHz
* Vertical Sensitivity: 10mV / Div - 5V / Div (1-2-5 progressive manner)
* Input impedance : 1MΩ
* Maximum input voltage : 50Vpp (1: 1 probe ), 400Vpp (10: 1 probe )
* Coupling modes include DC / AC / GND
* The horizontal time base range : 10ÎĽs / Div - 50s / Div ( 1-2-5 progressive manner )
Package contents:
1* Soldered DSO138 2.4" TFT Digital Oscilloscope
1* Acrylic Case Kits
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Fully Welded Assembled DSO138 2.4 TFT Digital Oscilloscope 1Msps Probe
Features:
* Component species diversity for students to identify elements ,inline elements welding, soldering SMD components training.
* Students can get in at the same time making a practical tool for audio, video synchronization , low-frequency switching power supply ,infrared receiver transmitter signal waveform and many other occasions.
* This set help effectively increase interest in learning, improve learning outcomes .
* Using ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4inch color TFT display can be used as test ARM development board .
* With automatic, regular and one-shot mode , easy to capture the moment waveform
* Available rising or falling edge trigger
* Adjustable trigger level position , and with instructions
* Observable trigger waveform before ( negative delay )
* Can freeze at any time waveform display (HOLD function )
* Comes 1Hz /3.3V square wave test signal source
* These need to be installed by yourselves.
Specifications:
* Power Output:DC 9V
* Maximum real-time sampling rate: 1Msps
* Accuracy: 12Bit
* Sampling buffer depth: 1024 bytes
* Analog bandwidth: 0-200KHz
* Vertical Sensitivity: 10mV / Div - 5V / Div (1-2-5 progressive manner)
* Input impedance : 1MΩ
* Maximum input voltage : 50Vpp (1: 1 probe ), 400Vpp (10: 1 probe )
* Coupling modes include DC / AC / GND
* The horizontal time base range : 10ÎĽs / Div - 50s / Div ( 1-2-5 progressive manner )
Package contents:
1* Soldered DSO138 2.4" TFT Digital Oscilloscope
1* Acrylic Case Kits
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

DSO138 2.4 TFT Digitals Oscilloscope Acrylic Case DIY Kit SMD Soldered
Features:
* Component species diversity for students to identify elements ,inline elements welding, soldering SMD components training.
* Students can get in at the same time making a practical tool for audio, video synchronization , low-frequency switching power supply ,infrared receiver transmitter signal waveform and many other occasions.
* This set help effectively increase interest in learning, improve learning outcomes .
* Using ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4inch color TFT display can be used as test ARM development board .
* With automatic, regular and one-shot mode , easy to capture the moment waveform
* Available rising or falling edge trigger
* Adjustable trigger level position , and with instructions
* Observable trigger waveform before ( negative delay )
* Can freeze at any time waveform display (HOLD function )
* Comes 1Hz /3.3V square wave test signal source
* These need to be installed by yourselves.
Specifications:
* Power Output:DC 9V
* Maximum real-time sampling rate: 1Msps
* Accuracy: 12Bit
* Sampling buffer depth: 1024 bytes
* Analog bandwidth: 0-200KHz
* Vertical Sensitivity: 10mV / Div - 5V / Div (1-2-5 progressive manner)
* Input impedance : 1MΩ
* Maximum input voltage : 50Vpp (1: 1 probe ), 400Vpp (10: 1 probe )
* Coupling modes include DC / AC / GND
* The horizontal time base range : 10ÎĽs / Div - 50s / Div ( 1-2-5 progressive manner )
Package contents:
1* Soldered DSO138 2.4" TFT Digital Oscilloscope
1* Acrylic Case Kits
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Fully Welded DSO138 2.4 TFT Digital Oscilloscope 1 Msps With Acrylic Case Kits
Features:
* Component species diversity for students to identify elements ,inline elements welding, soldering SMD components training.
* Students can get in at the same time making a practical tool for audio, video synchronization , low-frequency switching power supply ,infrared receiver transmitter signal waveform and many other occasions.
* This set help effectively increase interest in learning, improve learning outcomes .
* Using ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4inch color TFT display can be used as test ARM development board .
* With automatic, regular and one-shot mode , easy to capture the moment waveform
* Available rising or falling edge trigger
* Adjustable trigger level position , and with instructions
* Observable trigger waveform before ( negative delay )
* Can freeze at any time waveform display (HOLD function )
* Comes 1Hz /3.3V square wave test signal source
* These need to be installed by yourselves.
Specifications:
* Power Output:DC 9V
* Maximum real-time sampling rate: 1Msps
* Accuracy: 12Bit
* Sampling buffer depth: 1024 bytes
* Analog bandwidth: 0-200KHz
* Vertical Sensitivity: 10mV / Div - 5V / Div (1-2-5 progressive manner)
* Input impedance : 1MΩ
* Maximum input voltage : 50Vpp (1: 1 probe ), 400Vpp (10: 1 probe )
* Coupling modes include DC / AC / GND
* The horizontal time base range : 10ÎĽs / Div - 50s / Div ( 1-2-5 progressive manner )
Package contents:
1* Soldered DSO138 2.4" TFT Digital Oscilloscope
1* Acrylic Case Kits
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness