- -44%
Nincs szín - Univerzális DSO138 digitális oszcilloszkóp készlet 12 bites tartozék alkatrészek Tartós
Nincs szín - Univerzális DSO138 digitális oszcilloszkóp készlet 12 bites tartozék alkatrészek Tartós
1 300 Ft
44% megtakarítás
2 322 Ft
Nincs adó
Universal DSO138 digital oscilloscope Set 12 Bits Accessory Parts Durable
Features:
*The DSO138 digital oscilloscope kit uses an ARM Cortex-M3 processor and has a 2.4-inch TFT screen.
*The circuit operation is simple and reliable. It can display frequency, period, pulse width, duty cycle, maximum/minimum/average/peak/peak/virtual value.
*The kit uses an ARM Cortex-M3 processor (STM32F103C8) and includes a 2.4-inch color TFT display that can be used as an ARM test development board.
*Secondary development can be carried out on the basis of this kit, for example, it can be changed to millivoltmeter, data logger.
*Adjustable vertical displacement, with instructions.
*With automatic, regular and single shot modes, it is easy to capture the torque waveform.
*Available rising or falling edge triggers.
*Observable previous trigger waveform (negative delay).
*The waveform display can be frozen at any time (hold function).
*With 1Hz/3.3V square wave test signal source.
*With digital display of waveform parameters, including frequency, period, pulse width, duty cycle, -max/min/average/peak-peak/virtual value.
*Waveform storage function: the waveform will not be lost after power off.
*Short circuit and open circuit detection: can help users find welding errors.
*TFT controller identification function.
Note: This DIY kit has been soldered.
Product parameters:
*Maximum real-time sampling rate: 1Msps
*Accuracy: 12 bits
*Sampling buffer depth: 1024 bytes
*Analog bandwidth: 0-200KHz
*Vertical sensitivity: 10mV / Div-5V / Div (1-2-5 level)
*Input impedance: 1MΩ
*Maximum input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
*Coupling mode: DC / AC / GND
*Horizontal time base range: 10ÎĽs/ div-50s / div (1-2-5 level)
*Power supply voltage: DC 9V
*PCB size: 117 * 76mm / 4.6 * 3in
*Screen size: 52 * 40mm / 2 * 1.57in
Package Included:
1*DSO138 digital oscilloscope
1*probe
1*User Manual
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Features:
*The DSO138 digital oscilloscope kit uses an ARM Cortex-M3 processor and has a 2.4-inch TFT screen.
*The circuit operation is simple and reliable. It can display frequency, period, pulse width, duty cycle, maximum/minimum/average/peak/peak/virtual value.
*The kit uses an ARM Cortex-M3 processor (STM32F103C8) and includes a 2.4-inch color TFT display that can be used as an ARM test development board.
*Secondary development can be carried out on the basis of this kit, for example, it can be changed to millivoltmeter, data logger.
*Adjustable vertical displacement, with instructions.
*With automatic, regular and single shot modes, it is easy to capture the torque waveform.
*Available rising or falling edge triggers.
*Observable previous trigger waveform (negative delay).
*The waveform display can be frozen at any time (hold function).
*With 1Hz/3.3V square wave test signal source.
*With digital display of waveform parameters, including frequency, period, pulse width, duty cycle, -max/min/average/peak-peak/virtual value.
*Waveform storage function: the waveform will not be lost after power off.
*Short circuit and open circuit detection: can help users find welding errors.
*TFT controller identification function.
Note: This DIY kit has been soldered.
Product parameters:
*Maximum real-time sampling rate: 1Msps
*Accuracy: 12 bits
*Sampling buffer depth: 1024 bytes
*Analog bandwidth: 0-200KHz
*Vertical sensitivity: 10mV / Div-5V / Div (1-2-5 level)
*Input impedance: 1MΩ
*Maximum input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
*Coupling mode: DC / AC / GND
*Horizontal time base range: 10ÎĽs/ div-50s / div (1-2-5 level)
*Power supply voltage: DC 9V
*PCB size: 117 * 76mm / 4.6 * 3in
*Screen size: 52 * 40mm / 2 * 1.57in
Package Included:
1*DSO138 digital oscilloscope
1*probe
1*User Manual
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek