Egyéb automatizálási berendezések

Note:1. Please ensure that the power supply voltage does not exceed 5.5V, please do not reverse the polarity of '' '' and ''-'', otherwise the board will be burned out.
2. Please allow slight error due to manual measurement. Thanks for your kind understanding.
Features:Small digital power amplifier module.
2 *3W - Output 3W 3W for high fidelity sound quality.
This module is made of high-quality material.
Strong and durable to use, ensures a long service life.
2Pcs per set.
Specification:Type: PAM8403 Audio Amplifier Module
Working voltage: 2.5V-5.5V
Maximum output power: 3W * 2 (5V4Ω)
Length: Approx. 29 mm
Width: Approx. 20mm
The total height after installation: approximately 16mm
Weight: Approx. 9.3g
Package list:2 * PAM8403 Audio Amplifier Modules
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will
not mind before ordering.

Features:
100% brand new and high quality.
A popular and hugely versatile ATMEGA328P-PU DIP-28 IC chip.
High computing speed, strong data processing capability.
Stable performance, long service life.
Fit for ARDUINO .
Specification:
Core: AVR
Data bus width: 8 bit
Interface type: I2C, SPI, UART/USART
Program storage type: Flash
Program memory size: 32KB
Operating voltage: 2.7 V - 5.5 V
Working temperature: -40~85℃
Size: 45*19mm / 1.77*0.75in
Package list:
1 * Microcontroller Chip

Features:100% brand new and high quality
Used in automotive wheel polishing
Taper design, easy on the uneven of the polishing wheel
Long life, can be used repeatedly after cleaning
Turn your power drill into versatile polishing tool for , boats & motorcycles
Unique cone-shape great for wheels, fenders, bumpers & other hard to spots
packing includes
1*Polishing Pads for Wheels .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:
1, Over current protection.
2, Connect automatically after cooling.
Specifications:
Input Voltage: DC 1.8 V-15 V
Current: Less than 2 A
Size: 32 x 32 x 14 mm
Package includes:1 x Controller
Note:
1, Potentiometer has no switch function.
2, Connect to DC power. Never connect to 220 V AC power.
3, Please allow 1-3 mm error due to manual measurement. Thanks for your understanding.
4, Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:- DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM)
- The input power range is DC6-28V
- Duty Cycle adjustable range is 5% -100%
- Control the forward or reverse direction and the stop of DC motor by switch
- Potentiometer with switch function
- The switch cable length 15cm
- Item size: 32mm*50mm*15mm
Operating instruction:
Before you attempting to wire the controller, make sure power is off.
WARNING: DO NOT REVERSE POSITIVE AND NEGATIVE POWER LOADS. THIS WILL DAMAGE THE CONTROLLER
1. Connect wires refer to the "wiring diagram" (NO.4 picture)
2. Turn on the power, and adjust the potentiometer
3. The LED indicates the power up and the speed of motor
Package Includes:
1 x DC Motor Speed Controller
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Feature:The product is made of high-quality electronic components with stable and reliable performance.
Motor speed controller supports switching and forward and reverse functions, making it more flexible and convenient to use.
This is a DC motor controller. Please don't use it on AC motors.
The product is compact and easy to install in narrow space.
The input voltage of the product is within the range of DC 6-28V and the applicable current is within 3A.
Specification:Item: 3A PWM Motor Speed Controller
Material: Aluminum
Voltage: DC 6-28V
Package list:1 * Motor Speed Controller
Note:DC motor governor connected with DC power supply, must not be directly connected to 220V AC.
The motor can be connected without any positive or negative. When the running direction is inconsistent with the expectation, the direction can be changed by adjusting the line sequence.
The actual product color may deviate from the photo due to light.
There may be a slight deviation in the measurement of product.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Networks Mounted 4pcs Desktop Information Box Convenient Work Area Home
Feature:1. Flexible corner designed, built-in screws, which has stylish and generous appearance.
2. Used for connecting the communication socket between the equipment and the work area.
3. The RJ45 is connected to a jumper, and the IDC terminal is connected to horizontal wiring.
4. Manufactured according to the international standard ISO/IEC11801, TIA/EIA568.
5. IDC card wire material is phosphor bronze, suitable for 22-24AWG cable, 250 pluggable durability.
6. Single port, wide application, a clean and simple solution for networks expansion.
Specification:
Condition: 100% Brand New
Item Type: Desktop Information Box
Material: ABS
Color: As picture shown
Specification: RJ45-8P8C
Process: Machining
Number of Interfaces: Single Port
Scope of Application: Networks Wiring
IDC card wire material is phosphor bronze, suitable for 22-24AWG cable, 250 pluggable durability.
Test transmission performance at 100MHZ.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
4 x Desktop Information Box
4 x Douable-Sided Tape
8 x Screw

Feature:1. Accuracy valve body, strong sealing, with accuracy filter
2. Large ventilation, can quickly release compressed air
3. Made of aluminum alloy material, carefully frosted
4. High quality and great processing, good replacement for the old one
5. The connecting port diameter is G3/8in, easy to install
Specification:
Item Type: Quick Exhaust Valve
Model: QE
Operating Temperature: -5℃ -60℃
Working Medium: Air
Pressure Range: 0-0.95Mpa
Connecting Port Diameter: G3/8in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Valve

DIN Rail Mounting Interface Module DB15-G6 Double Male Head DIN Rail Mounting
Features:
1. 100% brand new and high quality.
2. Small body and strong applicability.
3. This board is easy to connect.
4. The design is regular, the label on it make you more convenient to connect.
5. This is an electronic component for electrical connection.
Specification:
Condition: 100% Brand New
Model: DB15-G6
Weight: Approx. 142g / 5.0oz
Size: Approx. 63 * 87 * 51mm / 2.5 * 3.4 * 2.0in
Package List:
1 * DB15 DIN Rail

Feature:1. RS485 passive interface converter, equipped with voltage clamp protection circuit, with anti-surge capability.
2. Compared with similar passive products, this product can be used as RS-232 to RS-485 converter, Rs232 to RS-422 converter, and no jumper switching, just connect to the corresponding network connection mode, ie Can work adaptively.
3. The product is compatible with RS-232, RS-485, and RS-422 standards. Ability to convert single-ended RS-232 signals to balanced RS-485 or RS-422 differential signals.
4. Widely used in attendance machines, IC card charge systems, industrial automation control systems, access card control systems, parking systems, automated banking systems, bus toll collection systems, canteens for sale, highway toll station systems, etc.
5. This product is compact and lightweight, easy to carry and easy to use.
Specification:
Item Type: Adapter
Interface Features: The interface is compatible with EIA/TA RS232C and RS-485RS422 standards.
Electrical Interface: RS-232 interface is DB9 hole type connection port (female head); RS4850Rs42 interface is DB9 pin type connection port (male head), which can be connected to the small board and easily routed through the six-position terminal on the small board.
Transmission Medium: RS485 uses a pair of twisted pairs (can be shielded, recommended twisted pair characteristic impedance is 1209); RS-422 uses two pairs of twisted pairs (can be shielded, it is recommended that each pair of twisted pair characteristic impedance is 1209)
Working Mode: RS-422 asynchronous full duplex; RS-485 asynchronous half duplex
Transmission Rate: 300-115200b0s
Transmission Distance: Approx. 0~800 Meters / 0-2625ft
Size: Approx. 55 x 35 x 15mm / 2.2v1.4 x 0.6in
Operating Environment: 0 ° C ~ 70 ° C
Relative Humidity: 5% ~ 95%
Cascadable: 16-32 Devices
Maximum Allowed Differential Pressure of Devices at Both Ends: ±5.7V
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Adapter

Description:This water valve has pure copper coil, which has a high conductivity. Perfect valve for water purifier to adjust the open or close of the water flow. Suitable tube inner diameter is 1/4inch.
Features:
Adopt pure copper coil, features high conductivity.
Suitable for 1/4 inch tube.
Perfect valve for water purifier.
The indicates the direction of water flow.
Negative and positive port can be connected freely.
Specification:Material: Copper Plastic
Voltage: DC 12V
Power: 6.5W
Pressure: 0-0.8Mpa
Type: Water Valve
Using position: Water Purifier Valve
Suitable tube inner diameter: 1/4inch
Weight: 118g
Quantity: 1pc
Package Included:1 x Water Valve

Feature:1. Mini size, compact and lightweight, embedded installation, very convenient.
2. With high specification process, carefully welded, precise hole position, full-featured.
3. The main chip ESP32, wireless Internet access, the protocol is compliant with 4.2 / BLE.
4. Protocol 802.11 b / g / n / e / i (802.11n, rate up to 150Mbps).
5. ESP32, dual core Xtensa 32 bit LX6. Up to 240MHz. 520kB internal . 4MB external flash.
6. The regulator output is 3.3V / 600mA, and the RF transmission is up to 250mA.
Specification:
Item Type: Module
Main Chip: ESP32
Flash Chip: 25Q32
Charging IC Chip: TP4054
USB to Serial Port Chip Port: CH340C
ESP32 VCC Range: 2.2V-3.6V
VBAT: Direct Connection to Battery (And Charger)
VUSB: Direct Connection to USB (5V)
VCC: Regulator Output 3.3V / 600mA
Up to 250mA for RF Transmission
Wireless Internet: 802.11b / G / N / E / I
WPA/ WPA2/ WPA2 Enterprise / SPS: 4.2 / BLE
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:
1 x WiFi Module Development Board
2 x Pins
4 x Short Needles
2 x Long Needles

Description:This controller can generate a PWM signal functions, the board has a jumper, you can set the default selection provided in the pulse frequency signal.
Features:
This module is supplied as a stepper drive signal. To control the stepper motor, but also must have the drive to use.
The controller has high, medium and low total of three types of frequency signals can be used to select jumper.
Frequency of measurement can amount PUL and common cathode terminal (GND) two ports.
PUL and PUL- pulsed positive and negative; EN and EN- is to enable the positive and negative terminals; DIR and DIR- are the positive and negative directions. These six lines are connected to drive the corresponding pulse, direction, so six ports possible.
Power supply: 15-160VDC or 5-12VDC. If you are using 5-12VDC power, positive end connect DC 5-12V Input, negative end connect Common Cathode End.
The forward and reverse of the motor can be controlled by pressing the key.
The speed of the motor can be controlled by adjusting the frequency of the potentiometer.
Specification:Power supply voltage: 15-160V / 5-12V
Frequency: High: 5.8KHZ-127KHZ, Mid: 590HZ-15.8KHZ, Low: 82HZ-2.3KHZ
Size: Approx. 73 x 51 x 37mm / 2.87 x 2 x 1.45inch
Weight: 50g
Quantity: 1pc
Package List:1 x PWM Generator
Note:If you use to start or stop the function, ENA controller enable terminal must be connected to common cathode or common anode drive.

Our high quality photoelectric switch is a great product to reduce energy consumption by automatically turning your lighting fixtures on when natural light is reduced and turning off in daytime. It can be used with wall packs, shoe box, porch lights, garden lights, street lights, passage lights, doorway lights, etc.
Features:
Brand new photoelectric switch with automatic illumination detection circuit, and it will shut down during the day and open during the night automatically.
Wires directly to the electrical box with a standard 1/2in pipe thread.
The photoelectric switch is applicable to control the street lighting, passage lighting and doorway lighting automatically in accordance with the ambient lighting level.
Photoelectric sensor switch with wide voltage range for stable characteristics, anti-interference and resistance circuit.
Dusk to dawn feature ensures your lights come on when they need to be on, and Heavy-duty thermal bi-metal switch swivels to allow precise positioning.
It stays normal temperature and produces almost no heat in daytime, so it is especially suitable for places where there are of high temperature in daytime.
It provides time delay over 30 seconds to avoid redundant switching against spotlight or at night.
Can work with most types of outdoor light lamps. Perfect for wiring into a lamp or lighting system requiring photoelectric automation.
Temperature compensation system provides consistent performance whether it's hot or cold. Includes a gathered with the sensor/switch body for convenient direction adjustment after installation. Additional is also available for further adjustment.
Specification:Condition: Brand New
Material: Plastic
Color:
Thread: 1/2"
Mount Type:
Related Humidity: 95% RH
Rated Voltage: 100~120V
Rated Frequency: 50/60Hz
Rated Loading: 1000W Tungsten, 1800VA Ballast
Power Consumption: 1.5VA
Operate Level: 10~20Lx On (Dusk),30~60Lx Off(Dawn)
Ambient Temperature: 40℃~ 70℃
Size: Shown as Picture
Package Weight: Approx. 71g/2.5oz
Application: Wall packs, shoe box, porch lights, garden lights, street lights, passage lights, doorway lights, etc
Package list:1 * Photoelectric Switch
1 * Zinc Alloy Nut
1 * Rubber Washer
Note:This photoelectric switch should be installed overhead the lamp ensuring the sensor can only detects the sunlight, and it should stay away from other lighting and don't put it in the shadow.

Description:Working voltage: AC 220V
Regulation voltage: AC 10-220V
Max power: 4000W (resistive load)
Efficiency: 90%
Dimensions: 85 x 55 x 38MM
Note: You must connect to the load before the regulator.
SCR is mainly used for resistive loads (incandescent electric wire, etc.), most of the single-phase AC motor can, but can not guarantee, other types of loads buyer to confirm their own. Fuse is not a panacea, there is reaction time, if the current is too large, in addition to burn the fuse, the module may also be burned.
Attention to fitting plastic cover due to the installation of the housing, can not be completely open, screwdriver to tighten the side with the point, the other to be careful when opened, excessive force easily snapping the lid, express transportation may also crushed for wearing parts, but It does not affect the module.
Package included:1 x 4000W AC220V SCR silicon controlled electronic volt regulator
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Feature:1. Ideal for creating 90-degree connections between linear guides
2. Able to establish a strong connection that can be placed along the length of the track
3. Compatible with C-Beam linear guides
4. Compatible with 20mm V-groove linear guides
5. With M5 fixing screw, easy to install and remove
Specification:
Item Type: Inside Corner Connector Bracket
Material: Cast zinc
Color: Silver
With M5 fixing screw
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:10 x 3D Printer Inside Corner Connector Bracket

HOME

EU 2040 Portable Mini Pulley Five-wheel Disk Fit for 3D Printer Accessories GS
Features:1. Excellent craft material, ensured quality and quantity.
2. The product is , improves production efficiency.
3. Positioning accuracy and silent and efficient sliding.
4. The folding through the slot has been added so that the timing belt can be easily folded onto itself and clamped into place.
5. Not easy to rust and resist corrosion.
Specifications:Size: Approx. 5*5*2.7cm/1.97*1.97*1.06in
Colour: Black
Model: 3D Printer Pulley Disk
Material: aluminum alloy
Package List:1 * 3D Printer Pulley Disk
4 * Screws

Feature:1. This regulator is used for DC brushed motors.
2. The knob is fluent and has no friction.
3. Light weight, small size and easy installation.
4. The controller is suitable for maximum power of 1500W.
5. The insulation material is organic resin of good working performance and high resistance.
Specification:
Item Type:DC Motor Controller
Material:Brass
Applicable Voltage: DC12V-50V
Applicable Current: Rated Current 30A
Power Range: Up to 1500W
Speed Range: 0% -100%
Product Frequency: 21khz
Insulation Material: Organic Resin
Insulation Thickness: Thin Plate
Flame Retardant Properties: V1 Board
Processing Technology: Calendered Foil
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Speed Regulator

Features:
1. 100% brand new and high quality.
2. Small body and strong applicability.
3. This board is easy to connect.
4. The design is regular, the label on it make you more convenient to connect.
5. This is an electronic component for electrical connection.
Specification:
Condition: 100% Brand New
Model: DB25-M6
Weight: Approx. 191g / 6.7oz
Size: Approx. 89 * 87 * 51mm / 3.5 * 3.4 * 2.0in
Package List:
1 * DB25 DIN Rail

Features:
1. The controller shell is made of aluminium alloy, which can protect the inner circuit and good for heat dissipation to avoid thermal overloading.
2. This item is a brushed motor controller, it can provide steady and sensitive control of braking and direction changes.
3. The wires and interfaces are durable, and low malfunction of long time use.
4. The interfaces have instruction labels on them for your easy installation.
5. Suitable for electric bicycles and scooter.
Specification:
Material: Aluminium alloy
Rated Voltage: 24V
Under-Voltage Protection: 20±0.5V
Regulator: 1-4V
Match Motor: 350-500W motor
Suitable for: electric bicycles and scooter
Size: Approx. 83 * 65 * 37 mm / 3.26 * 2.55 * 1.45 inch
Weight: Approx. 186 g
Package List:
1 * Brushed Controller
Noted:
1. Please read the labels on the interfaces of the controller, make sure that every interface is rightly connected to what it matches.
2. To the thick &red power cord, the red is for battery positive electrode, and for battery negative electrode. to the thick yellow&blue motor cord, the blue for positive electrode, the yellow for negative electrode. Make sure that power cord is placed rightly to prevent damage.

Features:
This driver board can be fit for DC brush less without hall sensor three-phase motors.
It was with an heat sink,and also coming with controller and forward -reverse switch cable.
This brush less motor controller features wide voltage high power, suitable for both small motor and large motor.
This motor controller has the function of over-current protection.
This item can be used directly, when you got it, wide voltage 5-36V, high power 350W, with heat sink, lead wire, control switch, so convenient.
Specifications:
Working voltage: 5-36V
Maximum current: 16A
Maximum power: 350W
Over current protection: yes
Size: length 63 x 45 x 27mm/2.48 x 1.77x 1.06inch
Weight:100g
Interface instruction:
1.MA MC: phase line output connection motor
2 5V GND: motherboard comes with original
3.VCC GND: external DC power supply line
4.SC :pulse signal output
5.Z/F: positive inversion control line 5V or GND to achieve positive and negative inversion
6.VR: signal input, the general external 100K tripod middle pin potentiometer VR, the remaining two feet 5V and GND main board.
Package included:
1x brush less motor controller
1x controller & forward-reverse switch cable
1x power cable

Features:
Suitable for Latest CNC Shield 3.0 for .
R3 board, MCU: ATmega328, USB interface: ATmega16U2.
PWM Spindle and direction pins,4-Axes support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axes with custom firmware using pins D12 and D13).
Complete electronics kit, used to build small CNC router, engraver, mill or robot.
CNC shielding plate: the latest CNC shielding version 3.0 GRBL 0.9.
Coolant Enable is compatible with A4988 or DRV8825 stepper drives running on 12-36V DC.
Can drive four axes: four sockets for A4988, DRV8825 or other StepStick compatible drives.
Compatible with GRBL firmware.
Specification:
Condition: 100% Brand New
Color: As Pictures Show
Package List:
1 * CNC shielding plate
1 * R3
4 * DRV8825 stepper motor driver
4 *
1 * USB cable

Features:
This regulator is integrated designed for more convenient using experience.
The motor can be set to slow start/slow stop time, and the start and stop of the motor is smoother.
Can set the upper and lower limits of the rotation speed.
Can set the motor acceleration and deceleration amplitude.
Wide power supply voltage range and stepless speed adjustment.
Specification:Input Voltage:DC6~60V
Output Voltage:Linearity under load
Output Current:0~30A
Continuous Current:Within 20A
Speed Regulation Type:Current Regulation
Speed Regulation Mode:Inching -
Speed Regulation Range:0~100%
Control Frequency:21KHz
Connection Type:Barrier terminal block
Supported Motor:Brush Motor
Size:96 x 61 x 34mm / 3.78 x 2.4 x 1.34in
Panel Opening:92 x 56mm / 3.62 x 2.2in
Rotation Speed Digital Display:0~100%
Package List:1 x Speed Regulator
Function:Slow start time setting
Function 1: 000 - 100 Slow start to 100% speed time is adjustable between 0-10 seconds, the default is 1 second.
Slow stop time setting
Function 2: 000 - 100 The slow stop time is adjustable between 0-10 seconds. The default is 1 second.
Lower speed limit setting
Function 3: 000 - 080 The minimum speed is adjustable between 0-80% and less than the maximum speed setting. The default is 0.
Speed upper limit setting
Function 4: 000 - 100 The maximum speed is adjustable between 0-100% and is greater than the minimum speed setting. The default is 100% .
Acceleration and deceleration value setting
Function 5: 001 002 005 010 015 020 020 025 Each press of the addition and subtraction key speed changes by 1% , 2% , 5% , 10% , 15% , 20% , 25% .
Note:The input voltage must be positive or negative. It is not possible to input 220V.
The input voltage should be equal to the rated voltage of the motor within 6-60V.

Features:
3-digit digital tube display helps you adjust the motor speed accurately.
Easily adjust the motor speed from 0% to 100% with the potentiometer.
Support Forward/Reverse rotation changeover.
Solid metal shell provides better protection to the internal components of the circuit board.
With screw terminals to wire with the motor and the power supply easily.
Specification:
Input voltage: DC10-55V (equal to the rated voltage of the motor)
Output voltage: linear under load
Output current: 60A
Continuous current: 40A
Support motor: DC brush motor
Speed control mode: potentiometer (linear)
Speed range: 0-100%
Control frequency: 15kHz
Forward/Reverse: support
Knob specification: 100K (with switch)
Package list:
1 * DC Motor Speed Controller

Features:
100% brand new and high quality
This motor speed controller is mainly used for DC Motor speed regulation
This sensor-less three-phase brush-less (BLDC) DC motor speed using high quality chips for wide voltage.
Stable performance, simple and most cost-effective multi-function operation, ease of use , is a compact DC brush-less DC drives.
This motor speed controller support DC motor CW and CCW rotation
Specifications:
Input voltage: DC5-36V
Forward reversal: within 15A
Input current: > motor working current
Speed control: potentiometer (270 degree linear)
Speed regulation range: 0-100%
Support motor: brushless motor
Type of connection: barrier terminal
Knob specification: 100K (with switch)
Module size: 10*6.8*4cm / 3.93*2.67*1.57in
Weight: 141g
Package included:
1 x Motor Speed Controller
Note:
1. The input voltage must differentiate " " ,"-", can't input 220V voltage
2. The input voltage should be equal to the rated voltage of the motor within 5-36V
3. The motor wire ABC don't differentiate sequence

Features:
1. This AC motor controller is designed with small size, high , wide rang of regulation and low power consumption.
2. With control knob can adjust motor and be displayed in real time.
3. It is easy to install and convenient to use.
4. Superior performance, easy maintenance.
5. Widely used in packaging, printing, food, electronics, instruments, equipment, clothing industry production line for drive device.
Specification:
Condition: 100% Brand New
Model: SS-32
Voltage: 220 V
Frequency: 50/60Hz
Rated Current: 5A
Range: 90/1700rpm
Working Environment: -10 ~ 50℃
Weight: Approx. 123g / 4.3oz
Size: Approx. 8 * 5 * 4cm / 3.2 * 2.0 * 1.6in
Package List:
1 * Separate Motor Governor
1 * Potentiometer
1 * Calibration Plate

Features:
This motor speed controller is suitable for AC220V 50/60HZ motor.
Speed regulation range is 90-1400r/min 50HZ, 90-1700r/min 60HZ
Suitable for packaging, printing, food, electronics, instrumentation, medical equipment, clothing industry production line for speed control drive devices
The controller uses high quality electronic circuit and integrated components for durability.
It has small size, high precision, wide speed controlling range, and long service life.
Specifications:
Power supply: AC220V 50/60hz
Rated power: 400W
Environment temperature: - 10 ~ 50℃;
Relative humidity:<90% ;
Speed regulation range: 90-1400r/min 50HZ, 90-1700r/min 60HZ
Weight: 295g
Wiring method:
Black wire is the motor main wire, red and white are the capacitor auxiliary wires, and 2 blue wires are the speed control feedback wires, the green wire is the ground wire.
Package includes:
1 x Speed Controller
Method of use:
1. Turn off the power, connect it according to the wiring diagram and make sure the connection is correct.
2. Fix the controller well and set the speed to the lowest "0", so as to avoid sudden large current and permanent damage when starting the power supply;
3. Then turn on the power and adjust the speed knob to the desired position. Please turn off the power when not needed;
4. The governor is connected to the motor. If the torque or speed is found to be inconsistent with the requirements, please adjust the fine-tuning potentiometer on the side of the product
5. To change the running direction of the motor, simply replace the jumper lines of "CCW" and "CW" on the back of the controller.
6. Select COM and CW short connection, then the motor will rotate clockwise.
7. Select COM and CCW short connection, then the motor do counterclockwise rotation.
(when changing direction, do not change the direction until the motor stops running completely.)

Features:
100% brand new and high quality
This product is 40A high power Controller, mainly used for controlling the DC motor
The built-in cooling fan, make it not easy to fever, high efficient work
Digital LED display of 0-100% percentage
This motor controller support DC motor CW and CCW rotation
Specifications:
Input voltage: DC10-55V
Output voltage: linear under load
Maximum current: 60A
Continuous current: 40A
control type: flow control
control: potentiometer (linear)
Support motor: DC brush motor
CW and CCW rotation: support
regulation range: 0-100%
Connection type: terminal
Knob specification: 100K (with switch)
Type of connection: barrier terminal
Weight: 295g
Package included:
1 x Motor Controller
Note:
1. The digital display is the motor full percentage 0-100, non-motor actual
1. The input voltage must differentiate " " ,"-"
2. The input voltage should be equal to the rated voltage of the motor within 10-55V

Features:
The controller shell is made of aluminium alloy with groove design, which can protect the inner circuit due to good heat dissipation feature to avoid thermal overloading.
This item is a brushless motor controller, it can provide steady speed and sensitive control of braking and direction changes.
The wires and interfaces are durable, and ensure low malfunction of long time use.
The interfaces have instruction labels on them for your easy installation.
Suitable for electric bicycles, scooter, etc.
Specification:
Material: Aluminium alloy
Rated Working Voltage: 24V
Rated Power: 250W
Current: 13A
Low Voltage Protection: 20V
Suitable Motor Phrase Angle: 60 / 120 degree
Suitable for: electric bicycle, scooter, etc
Size: Approx. 8.8 x 5.2 x 3cm / 3.46 x 2.05 x 1.18inch
Weight: Approx. 200g
Package List:
1 x Brushless Controller

Speeds Controller Speeds Governor Direct Current for Electricity Brush DC Motor
Features:
Use electronic control to adjust the working speed, reliable and stable performance.
DC motor governor input is direct current, can not be directly connected to AC, otherwise it will burn out.
Do not reverse connect the positive and negative poles of the DC power supply, otherwise the governor will be damaged.
The potentiometer knob can change the governor output duty ratio, thus changing the motor speed.
The motor can be connected without any positive or negative directions. The direction can be changed by adjusting the line sequence.
Specification:Applicable voltage: DC6~90V (no AC connection)
Applicable current: rated current 8A; maximum current 15A; static current 0.005A
Power range: 0.01~1000W
Voltage regulating range: PWM output range 0% ~ 100% , (stop - maximum speed)
PWM frequency: 16kHZ
Specification of fuse: 15A ceramic arc extinguishing quick melting type
Package List:1 x DC Motor Governor
Note:This governor is only used for brush DC motor. It is not suitable for brushless DC motor and cannot be used as voltage regulator.

Feature:1. Anti-coaster features, with overcurrent protection.
2. Automatic identification the hall sensor, automatic identification the 24V.
3. Automatic identification the Phase angle of 60 degrees and 120 degrees.
4. Low level/E-ABS brake, good performance.
5. Suitable for electric bicycle, and electric scooter.
Specification:
Item type: Brushless Controller
Material: aluminium alloy
Weight: Approx. 216g
Size: Approx. 9.2x5.5x3.2cm/3.6x2.2x1.3in
Rated voltage: DC 24V
Rated power: 350W
Current: 16-18A
Phase Angle: 120 degrees
Undervoltage: 21.5V
Limit current: 15A
Brake: Low .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Brushless Controller
Note:Only applicable to controllers with sensors. This is a simple version.

Feature:
1. Easy and simple to handle convenient to use, it is a great replacement for broken ones.
2. Widely used for adjusting speed of lighting, fan, power tools, massager, pump, etc.
3. Adopts electronically controll operating speed of use equipment , flow rate and adjustment of brightness.
4. Compact size, light weight, practical and convenient to carry.
5. Shell is made of high quality materials, flame retardant, anti - stress, no deformation, durable.
#1-HR-8A-1
Specification:
Condition: 100% Brand New
Item Type: Speed Controller
Model: HR-8A-1
Material: ABS
Color: As shown in the picture
Size: Approx.13.3x8x7cm / 5.2x3.1x2.8in
Weight: Approx.13000g/458.6oz
Plug&Voltage: UK Plug 220V-240V
Frenquency: 50Hz
Maximum Current: 8A
#2-HR-8A
Specification:
Condition: 100% Brand New
Item Type: Speed Controller
Model: HR-8A
Material: ABS
Color: As shown in the picture
Size: Approx.13.5x8x7cm / 5.3x3.1x2.8in
Weight: Approx.13000g/458.6oz
Plug&Voltage: EU Plug 230V
Frenquency: 50Hz
Maximum Current: 8A
Package List:
1 x Speed Controller
1 x Instruction Manual

Features:
Speed Control Knob: This knob can adjust motor speed and display in real time.
There are 5 controllers in different power and you can choose the one you need.
It has compact size, high precision, wide speed controlling range, and long service life.
Built-in capacitor, supporting CW/CCW rotation.
Widely used in packaging, printing, food, electronics, instruments, medical equipment, clothing industry production line for speed drive device.
Connect COM and CW, the motor rotates in forward direction; connect COM and CCW, the motor rotates in reverse direction.
Specification:Model: UX-52
Input Voltage: AC 220V 50Hz
Optional Power: 15W, 60W, 120W, 250W, 400W
Output Speed: 0-1450rpm
Speed Adjustable Range: 0-1450rpm
Operation Mode: Manual Precision
Speed Change Rate: ≤2%
Steady Speed Precision: 10
Port: Pin
Size: Approx. 10*10cm/3.9*3.9inch
Weight: Approx. 322g / 11.4oz
Package List:1 x Motor Speed Controller

Features:
Support for 4- linkage, you can connect four stepper motor drives or servo drives.
Maximum step-pulse frequency is 100KHz, which is suitable for the servo or stepping motor.
Support automatic probe tool.
Support emergency input.
Support for limit switch.
Support for connecting electronic hand wheel.
Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable.
Have 0-10V output port, you can use MACH3 software to control the spindle motorspeed.
4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back tozero and other device.
4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device.
Status LED, indicate connection status on the board.
Specification:
Interface board size: 9*6.3*2cm/3.5*2.5*0.8in
Jog handler size: 10*6*2.5cm/3.9*2.4*1in
Weight: Approx.200g/7.1oz
Package list:
1 x USB CNC Controller Card
1 x Jog Handler
1 x USB cable
1 xCD
1 x Connecting Cable
Note:New-style and old-style are shipped randomly

Features:1. Using advanced blue film liquid technology display screen, the interface is softer, easier to use and observe.
2. It can automatically transfer the cold and heat mode. Two plug type to choose for meet different needs.
3. Designed for adjust the temperature of fish tank or reptile box to provide suitable growth temperature.
4. With button sound, when press, the buzzer will once, the operation is more simple and convenient.
5. Small in size making it stylish, can be placed on , table or install in and land animal houses.
Specification:Condition:100% Brand New
Mode: -320
Shell Material: plastic
Color: As Pictures Shown
Battery: 1 * LIR2032 button cell
Temperature measurement range: -40℃ ~ 50 ℃
Temperature control range: 16 ~ 40 ℃
resolution ratio: 0.1 ℃
measurement accuracy: ±1℃
Power consumption: ≤3W
Runtime environment temperature: - 10 ~ 60 ℃
Operating environment humidity: 20% ~85% (no condensation)
Input: 1 NTC sensor
Output: output of 2 relays (relay capacity 10A)
Plug Type: 110V US Plug, 220V EU Plug (optional)
LCD display Size: approx. 9.2*1.5*7cm/3.6*0.6*2.8in
Package list:
1 * Thermostat (Including Battery)
2 * Paster

Features:This display adopts good quality materials, lightweight, rainproof, sturdy and durable.
LCD display can clearly show the state and data, backlight enables you to see scree clearly in dim environment, buttons for quick operation, easy to use.
The controller is brushless type, working silently and sensitive to the state of electric bike.
Easy to install and use, comes with mount for LCD display and suitable for 22.5mm handlebar.
Suitable for electric bicycles, cars, scooters.
Specification:
Material: Plastic LCD Metal
Color: Shown as picture
Options: 1#24V-36V; 2#36V-48V
Power: 250W/350W
Low-voltage Protection: 1#24V-36V: 19V/30V; 2#36V-48V: 30V-41V
Waterproof: Rainproof
Controller Size: Approx. 8.8 x 5.2 x 3cm / 3.46 x 2.04 x 1.18inch
Display Size: Approx. 8 x 5cm / 3.15 x 1.97inch
Weight: Approx. 332g
Package List:
1 x LCD Display
1 x Controller
1 x Mount
Note:
Each cable is labeled with color for different uses.
Red: power positive electrode
Black: power negative electrode
Yellow: power output
Brown: lamp positive electrode
White: lamp negative electrode
Blue: indicator signal
Green: signal receive

Feature:1. Wide working voltage range makes it easier for power supply.
2. The motor controller can control power between 0.01~7500W.
3. Suitable for all kinds of general-purpose DC brush motor speed control, all kinds of vehicle motor speed control, production line conveyor speed control, pipeline exhaust fan speed control, treadmill speed regulation, multiple computer fan parallel speed regulation, electronic fan speed control, various types DC bulb dimming, various types of DC heaters to adjust temperature.
4. The static current of the motor controller is 0.14A.
5. The PWM frequency is 15KHz and the duty ratio is 0~99.99% .
Specification:
Item Type:DC Motor Controller
Working Voltage:DC10~50V
Control Power: 0.01-7500W (Maximum Current: 200 Amps, Rated Current 100 Amps)
Quiescent Current: 0.14 Amps (The Quiescent Current Will not Exceed 140mA When Operating from DC10V to DC50V)
PWM Duty Cycle: 0% -99.99%
PWM Frequency: 15khz
Working Temperature: -20 ° C - 40 ° C
Size:239 x 115 x 65mm / 9.41 x 4.53 x 2.56in
Package List:1 x Motor Speed Controller

Explain:This universal footbed socket adapter is suitable for most Japanese and domestic automobiles. This product is used to protect the metal grid point jack of landing gear on most vehicles.
Highly durable and resistant to damage, can prevent the chassis guide from being stolen, bent and broken.
Polyurethane is soft enough not to damage your metal vehicle, but hard enough to support it.
Installation instructions:This cushion is effective and can be used with a hydraulic floor jack without damaging your car or its chassis system.
Ideal and essential for household oil changers and repairs, place them in glove boxes so that when you change your tires, most tire stores won't even use them. The chassis is damaged without you knowing or seeing the damage.
This type of Jack pad is very suitable for PINCH-POINT.
The lifting side of hydraulic jack adopts your standard.
Specifications:Material: Rubber
Colour: Black
Size: 6.5 x 3.3 cm/2.56 x 1.3 inch (DxH)
Quantity: 1 piece
Be careful:As a result of manual measurement, please allow an error of 1-3 mm.
Because of the differences between different monitors, the image may not reflect the actual color of the project. Thank you!
The package includes:1X automobile jack cushion

Description:Description:
100% brand new and high quality
specification:Product Name: 4000W AC voltage regulator
Thyristor Model: BTA41600B
Maximum power: 4000W (resistive load limit power), long time should be reduced power use.
Efficiency: more than 90%
Working voltage: AC 220V
Adjust the voltage: AC 10-220V
Note that the load must be re-regulator.
SCR is mainly used for resistive load (electric filament incandescent, etc.), single-phase AC motor can also be, but not guaranteed can, other types of load, please confirm the buyer. Fuses are not omnipotent, there is reaction time, if the current is too large, in addition to burning the fuse, the module may also burn out.
Note that the plastic cover on the connector due to the installation of the shell, can not be completely opened, the screwdriver to point to the point of twist, the other open to be careful, too much effort to break off the lid
style: convenient and practical
color: as the picture shows
size: app 85*55*38 mm
package: 1 pcs module in a pack
SKU:BSX0002
Preview:

Descriptions:
*L298N DC stepper motor driver module dual H bridge control board for Arduino.
*Using large capacity filter capacitor, this module can follow current to protect diodes and improve the reliability.
*With high quality and durable performance.
*100% brand new and in good condition.
*Color: As pictures show
*Main chip: L298N
*Logical voltage: 5V
*Drive voltage 5V-35V
*Logical current: 0mA-36mA
*Drive current: 2A
*Max power: 25W
*Storage temperature: -20℃ to 135℃
*Dimension: about 43 * 43 * 27mm
Package including:
1 * Double H Bridge Drive Module
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Descriptions:
*L298N DC stepper motor driver module dual H bridge control board for Arduino.
*Using large capacity filter capacitor, this module can follow current to protect diodes and improve the reliability.
*With high quality and durable performance.
*100% brand new and in good condition.
*Color: As pictures show
*Main chip: L298N
*Logical voltage: 5V
*Drive voltage 5V-35V
*Logical current: 0mA-36mA
*Drive current: 2A
*Max power: 25W
*Storage temperature: -20℃ to 135℃
*Dimension: about 43 * 43 * 27mm
Package including:
1 * Double H Bridge Drive Module
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

DC 6V 12V 24V 3A Reversible Motor Speed Controller Regulator Driver Switch PWM
Details:
*DC 6V 12V 24V 3A Reversible Motor Speed Regulator Controller PWM Controller
*Control the forward or reverse direction
*Control the motor with the button switch
*Good workmanship and stable performance
*Supply voltage: DC 6V-24V
*Capacity adjustable: 0% -100%
*The maximum continuous output current: 3A
*Dimension: approx. 57*37*21mm
Package Contents:
1 * Motor Speed Controller
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

12/24/220V Digital LED Temperature Controller Thermostat Control Switch & Probe
Welcom to our store : shoppingfromeast
Details:
*Temperature measurement range: -50~110degree Celsius
*Temperature control range: -50~110degree Celsius
*Temperature measuring accuracy: ±0.2degree Celsius
*Temperature control precision: ±0.1degree Celsius
*Measuring input: NTC10K, L=1 meter waterproof probe
*Input power: according to the classification of options
*Output power: according to the classification of options
*Power Supply: 12V, 24V, 220V (Please Select)
*Dimension: 6*4.5*3.1cm/ 2.4*1.8*1.2 inch
*Comes with a waterproof probe of 1meter (Changeable 2P plug)
Package Contents:
1 * Digital LED Temperature Controller Probe
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

12/24/220V Digital LED Temperature Controller Thermostat Control Switch & Probe
Welcom to our store : shoppingfromeast
Details:
*Temperature measurement range: -50~110degree Celsius
*Temperature control range: -50~110degree Celsius
*Temperature measuring accuracy: ±0.2degree Celsius
*Temperature control precision: ±0.1degree Celsius
*Measuring input: NTC10K, L=1 meter waterproof probe
*Input power: according to the classification of options
*Output power: according to the classification of options
*Power Supply: 12V, 24V, 220V (Please Select)
*Dimension: 6*4.5*3.1cm/ 2.4*1.8*1.2 inch
*Comes with a waterproof probe of 1meter (Changeable 2P plug)
Package Contents:
1 * Digital LED Temperature Controller Probe
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Cnc Z Axis Router Mill Zero Check Touch Plate Tool For MACH3 Setting Probe EBUK
Details:
High quality and brand new
Material: Wire Metal
Color: As Picture Show
Size: 3.5*2cm/ 1.38*0.79 inch (D*H, Approx)
Effective Surface of the Cutter: 25mm /0.98 inch (Diameter, Approx)
Line Length: 110cm (Approx)
Package Contents:
1 * CNC Router Engraving Machine Tool
Usage:
The wire connect on the control panel interface.
The clip and the control board GND (negative) is connected.
The tool can be clamped portion of the operation when the cutter with a clip.
When the tool contacts the knife that the process is complete.
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

CNC Touch Probe Wire Carving 110cm Tools Engraving Accessories 3.5*2cm
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
*Material: metal wire metal
*Color: as shown
*Size: 3.5*2cm / 1.38*0.79 inches (D * H, approximately)
*Cutter effective surface: 25mm /0.98 inch (diameter, approximately)
*Cord length: 110cm (approximately)
Usage:
The wire is connected to the control panel interface.
The fixing clip and the control board GND (negative) are connected.
This tool can perform partial clamping operations when the tool is clamped.
When the tool touches the cutter , the process is complete.
Package Contents:
1 * CNC engraving machine
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Metal CNC Touch Probe Wire Machine Tools Engraving Accessories 3.5*2cm
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
*Material: metal wire metal
*Color: as shown
*Size: 3.5*2cm / 1.38*0.79 inches (D * H, approximately)
*Cutter effective surface: 25mm /0.98 inch (diameter, approximately)
*Cord length: 110cm (approximately)
Usage:
The wire is connected to the control panel interface.
The fixing clip and the control board GND (negative) are connected.
This tool can perform partial clamping operations when the tool is clamped.
When the tool touches the cutter , the process is complete.
Package Contents:
1 * CNC engraving machine
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Metal CNC Touch Probe Plate Setting Engraving Accessories Carving 110cm
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
*Material: metal wire metal
*Color: as shown
*Size: 3.5*2cm / 1.38*0.79 inches (D * H, approximately)
*Cutter effective surface: 25mm /0.98 inch (diameter, approximately)
*Cord length: 110cm (approximately)
Usage:
The wire is connected to the control panel interface.
The fixing clip and the control board GND (negative) are connected.
This tool can perform partial clamping operations when the tool is clamped.
When the tool touches the cutter , the process is complete.
Package Contents:
1 * CNC engraving machine
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

CNC Router Check Touch Plate Tools Setting Probe Engraving Machine Accessory
CNC Router Check Touch Plate Tools Setting Probe Engraving Machine Accessory
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
*Material: metal wire metal
*Color: as shown
*Size: 3.5*2cm / 1.38*0.79 inches (D * H, approximately)
*Cutter effective surface: 25mm /0.98 inch (diameter, approximately)
*Cord length: 110cm (approximately)
Usage:
The wire is connected to the control panel interface.
The fixing clip and the control board GND (negative) are connected.
This tool can perform partial clamping operations when the tool is clamped.
When the tool touches the cutter , the process is complete.
Package Contents:
1 * CNC engraving machine
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.