Tesztelők és kalibrátorok

Features:Made of plating.
Elaborate made and defect free.
Shiny and elegant appearance.
Specification:Color: Silver
Material: plating
Permissible Error: /-0.003g
Item Weight: 1g / 2g / 5g /10g / 20g
Package Includes:1 * 1g Scale Weight
1 * 2g Scale Weight
1 * 5g Scale Weight
1 * 10g Scale Weight
1 * 20g Scale Weight .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:
This is a must have for anyone with a pocket scale
This precession calibration set has all of the weights you will need and more!
5Pcs 50g 2*20g 10g 5g Grams accurate Calibration Jewellery Scale Weights Set
Specifications:Permissible Error: /- 0.003g
Quantity: 1 x 50g,2 x 20g,1 x 10g, 1 x 5g
Material: Chrome Steel
Color: Silver
Total Set of Weights:105g
Package Included:1 x Plastic Storage Case
1 x Tweezer
1 x 50g Calibration Weight
2 x 20g Calibration Weights
1 x 10g Calibration Weight
1 x 5g Calibration Weight .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Specifications:
Permissible Error: /- 0.003g
Quantity: 1 x 100g,1 x 50g,2 x 20g,1 x 10g, 1 x 5g, 2x2g, 1x 1g, 1x500mg, 2x200mg, 1 x 100mg, 1 x 50mg, 2 x 20mg, 1 x 10mg
Color: Silver
Material: No.45 steel
Total Set of Weights:211.1g
Package included:1 x Plastic Storage Case
1 x Tweezer
1 x 100g Calibration Weight
1 x 50g Calibration Weight
2 x 20g Calibration Weights
1 x 10g Calibration Weight
1 x 5g Calibration Weight
2 x 2g Calibration Weights
1 x 1g Calibration Weight
1 x 500mgCalibration Weight
2 x 200mg Calibration Weights
1 x 100mg Calibration Weight
1 x 50mg Calibration Weight
2 x 20mg Calibration Weights
1 x 10mg Calibration Weight

Fiber optic identifiers are a must-have tool for fiber maintenance during maintenance, installation, cabling, and recovery, and are often used for lossless fiber identification. Find and separate a specific fiber in any single-mode and multi-mode fiber position. By illuminating the 1310 or 1550 optical signal with a specific modulated signal into the fiber at one end, identify it with the identifier on the line, and can also indicate the business.
How to use: Use the appropriate fixture head, clamp the fiber under test (bare fiber or pigtail) into the test area, and then restart for testing.
Features:Relative optical power in digital display fiber.
Portable style, the direction and frequency of light can be discerned without interrupting the fiber.
The "one-touch" operation mode makes the operation simple and convenient.
Corresponding adapter heads are provided for bare fibers and a variety of tail fiber.
Can recognize three common signal frequencies, namely 2KHz, 1KHz, 270Hz.
Specification:Instrument model: KFI-35
Wavelength recognition range: 800-1700nm
Identification signal type: CW, 270HZ±5% , 1KHZ±5% , 2KHZ±5%
Probe Model: 1 InGaAa 2pcs
Adapter type (mm): H 0.9/0.25 for bare fiber H 2.0/3.0 for tail fiber
Signal direction: Left and right LED indication
Relative optical power value: Digital display
Optical signal frequency: 270HZ, 1KHZ, 2KHZ LED indicator display
Working temperature (°C): -10 ~ 60
Storage temperature (°C): -25 ~ 70
Power supply battery: 9V dry battery (not included)
Package list:1 * Optical Fiber Identifier
4 * Adapters
1 * Hand Bag
1 * Instruction Manual.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Network Analyzer Calibration kit Short Stainless steel Replacement Useful
Item Details:
*100% Brand new and high quality
*Made of high-quality materials, durable and practical
*Material: Stainless steel
*Color: As Pictures Show
*Frequency: DC-6GHz, the standard load full-band standing wave is lower than 1,025
*A set of vector network analyzer calibration kits, including SMA open, SMA short, a 50Ω standard load, and the interface is SMA male (female thread)
*The SMA load terminal is stainless steel with a low standing wave. 50 ohm imported stainless steel load, low standing wave, DC-6 GHz (1 MHz-6 GHz), the standing wave ratio is basically around 1.02
Package Contents:
3*Calibration Accessories
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Calibration kit Load Short DC-6GHz Stainless steel Replacement Tool 3pcs
Item Details:
*100% Brand new and high quality
*Made of high-quality materials, durable and practical
*Material: Stainless steel
*Color: As Pictures Show
*Frequency: DC-6GHz, the standard load full-band standing wave is lower than 1,025
*A set of vector network analyzer calibration kits, including SMA open, SMA short, a 50Ω standard load, and the interface is SMA male (female thread)
*The SMA load terminal is stainless steel with a low standing wave. 50 ohm imported stainless steel load, low standing wave, DC-6 GHz (1 MHz-6 GHz), the standing wave ratio is basically around 1.02
Package Contents:
3*Calibration Accessories
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

3pcs Calibration kit Network Analyzer Short Replacement SMA-type Vector
Item Details:
*100% Brand new and high quality
*Made of high-quality materials, durable and practical
*Material: Stainless steel
*Color: As Pictures Show
*Frequency: DC-6GHz, the standard load full-band standing wave is lower than 1,025
*A set of vector network analyzer calibration kits, including SMA open, SMA short, a 50Ω standard load, and the interface is SMA male (female thread)
*The SMA load terminal is stainless steel with a low standing wave. 50 ohm imported stainless steel load, low standing wave, DC-6 GHz (1 MHz-6 GHz), the standing wave ratio is basically around 1.02
Package Contents:
3*Calibration Accessories
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

17* 211.1g 10mg-100g Grams Precision Calibration Weight Set Test Jewellery Scale!
Warm tip: The color of tweezers will be sent at random, we do not accept the specified color, thanks for your understanding.
Details:
*Calibration weight for re-calibrating or testing digital scales, jewelry scales
*Suitable for general laboratory, commercial and educational use
*Carbon steel with chrome finish
*This calibration weight set contains: 1 x 100g, 1 x 50g, 2 x 20g, 1 x 10g, 1 x 5g, 2x2g, 1x 1g, 1x500mg, 2x200mg, 1 x 100mg, 1 x 50mg, 2 x 20mg, 1 x 10mg
*Permissible Error: /- 0.003g
*Material: No.45 steel
*Weight Color: Silver (As pictures show)
*Total Set of Weights: 211.1g
Specifications:
1 Set(=17pcs )Includes Following Sizes:
1 x 100g Calibration Weight
1 x 50g Calibration Weight
2 x 20g Calibration Weights
1 x 10g Calibration Weight
1 x 5g Calibration Weight
2 x 2g Calibration Weights
1 x 1g Calibration Weight
1 x 500mgCalibration Weight
2 x 200mg Calibration Weights
1 x 100mg Calibration Weight
1 x 50mg Calibration Weight
2 x 20mg Calibration Weights
1 x 10mg Calibration Weight
Package Contents:
1 x 17Pcs Set Precision Calibration Weights
1 x Plastic Storage Case
1 x Tweezers
Notes:
1,Different scales need different sizes of weights to calibrate them. Please make sure you are taking the correct size weight for the scale you would like to use it with.
2,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

17 Pcs/Set 211.1g 10mg-100g Grams Precision Calibration Weight Test Durable
Warm tip: The color of tweezers will be sent at random, we do not accept the specified color, thanks for your understanding.
Details:
*Calibration weight for re-calibrating or testing digital scales, jewelry scales
*Suitable for general laboratory, commercial and educational use
*Carbon steel with chrome finish
*This calibration weight set contains: 1 x 100g, 1 x 50g, 2 x 20g, 1 x 10g, 1 x 5g, 2x2g, 1x 1g, 1x500mg, 2x200mg, 1 x 100mg, 1 x 50mg, 2 x 20mg, 1 x 10mg
*Permissible Error: /- 0.003g
*Material: No.45 steel
*Weight Color: Silver (As pictures show)
*Total Set of Weights: 211.1g
Specifications:
1 Set(=17pcs )Includes Following Sizes:
1 x 100g Calibration Weight
1 x 50g Calibration Weight
2 x 20g Calibration Weights
1 x 10g Calibration Weight
1 x 5g Calibration Weight
2 x 2g Calibration Weights
1 x 1g Calibration Weight
1 x 500mgCalibration Weight
2 x 200mg Calibration Weights
1 x 100mg Calibration Weight
1 x 50mg Calibration Weight
2 x 20mg Calibration Weights
1 x 10mg Calibration Weight
Package Contents:
1 x 17Pcs Set Precision Calibration Weights
1 x Plastic Storage Case
1 x Tweezers
Notes:
1,Different scales need different sizes of weights to calibrate them. Please make sure you are taking the correct size weight for the scale you would like to use it with.
2,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Analyzer Calibration Vector DC-6GHz Measurement Tester Kit Replacement
Item Details:
*100% Brand new and high quality
*Made of high-quality materials, durable and practical
*Material: Stainless steel
*Color: As Pictures Show
*Frequency: DC-6GHz, the standard load full-band standing wave is lower than 1,025
*A set of vector network analyzer calibration kits, including SMA open, SMA short, a 50Ω standard load, and the interface is SMA male (female thread)
*The SMA load terminal is stainless steel with a low standing wave. 50 ohm imported stainless steel load, low standing wave, DC-6 GHz (1 MHz-6 GHz), the standing wave ratio is basically around 1.02
Package Contents:
5*Calibration Accessories
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Item Details:
*100% Brand new and high quality
*Made of high-quality materials, durable and practical
*Material: Stainless steel
*Color: As Pictures Show
*Frequency: DC-6GHz, the standard load full-band standing wave is lower than 1,025
*A set of vector network analyzer calibration kits, including SMA open, SMA short, a 50Ω standard load, and the interface is SMA male (female thread)
*The SMA load terminal is stainless steel with a low standing wave. 50 ohm imported stainless steel load, low standing wave, DC-6 GHz (1 MHz-6 GHz), the standing wave ratio is basically around 1.02
Package Contents:
5*Calibration Accessories
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Analyzer Calibration Replacement DC-6GHz Measurement Tester Supplies Reliable
Item Details:
*100% Brand new and high quality
*Made of high-quality materials, durable and practical
*Material: Stainless steel
*Color: As Pictures Show
*Frequency: DC-6GHz, the standard load full-band standing wave is lower than 1,025
*A set of vector network analyzer calibration kits, including SMA open, SMA short, a 50Ω standard load, and the interface is SMA male (female thread)
*The SMA load terminal is stainless steel with a low standing wave. 50 ohm imported stainless steel load, low standing wave, DC-6 GHz (1 MHz-6 GHz), the standing wave ratio is basically around 1.02
Package Contents:
5*Calibration Accessories
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Neon Tester Tube Lamp Fluorescent Light Bulb LED Malfunction 97g / 3.38oz
Features:
100% brand new and high quality
Made of high-quality materials, durable
Portable handheld neon tube
Just press and hold the power button for easy use, then the LED indicator and neon tube will flash
Powered by 4 AA batteries (not included)
Using this tester, you can quickly find the reason why the neon light does not light up
Product parameters:
Material: mainly ABS
Product size: 19.5 * 4.1 * 2cm / 7.7 * 1.6 * 0.8in
Packing size: 21 * 5.2 * 2.3 cm / 8.2 * 2.0 * 0.9 inches
Package weight: 97g / 3.38oz
how to use:Install the battery (note the polarity). Extend the antenna and touch it to the polarity line of the neon tube. Press and hold the power button, then the LED indicator and neon tube will flash.
When touching the antenna with your hand, do not press the power button, otherwise you will be shocked.
Do not use this product in a humid environment or with your hands.
Do not reverse the polarity of the battery. Please install the battery correctly before closing the cover.
When using, carrying or storing, avoid severe vibration. Keep this item.
Package list:
1 *Neon tube tester
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Tester Lamp Fluorescent Light Bulb LED Malfunction Detector 97g / 3.38oz
Features:
100% brand new and high quality
Made of high-quality materials, durable
Portable handheld neon tube
Just press and hold the power button for easy use, then the LED indicator and neon tube will flash
Powered by 4 AA batteries (not included)
Using this tester, you can quickly find the reason why the neon light does not light up
Product parameters:
Material: mainly ABS
Product size: 19.5 * 4.1 * 2cm / 7.7 * 1.6 * 0.8in
Packing size: 21 * 5.2 * 2.3 cm / 8.2 * 2.0 * 0.9 inches
Package weight: 97g / 3.38oz
how to use:Install the battery (note the polarity). Extend the antenna and touch it to the polarity line of the neon tube. Press and hold the power button, then the LED indicator and neon tube will flash.
When touching the antenna with your hand, do not press the power button, otherwise you will be shocked.
Do not use this product in a humid environment or with your hands.
Do not reverse the polarity of the battery. Please install the battery correctly before closing the cover.
When using, carrying or storing, avoid severe vibration. Keep this item.
Package list:
1 *Neon tube tester
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

1 set Tester 97g / 3.38oz Neon Tube Lamp Fluorescent Bulb LED Malfunction
Features:
100% brand new and high quality
Made of high-quality materials, durable
Portable handheld neon tube
Just press and hold the power button for easy use, then the LED indicator and neon tube will flash
Powered by 4 AA batteries (not included)
Using this tester, you can quickly find the reason why the neon light does not light up
Product parameters:
Material: mainly ABS
Product size: 19.5 * 4.1 * 2cm / 7.7 * 1.6 * 0.8in
Packing size: 21 * 5.2 * 2.3 cm / 8.2 * 2.0 * 0.9 inches
Package weight: 97g / 3.38oz
how to use:Install the battery (note the polarity). Extend the antenna and touch it to the polarity line of the neon tube. Press and hold the power button, then the LED indicator and neon tube will flash.
When touching the antenna with your hand, do not press the power button, otherwise you will be shocked.
Do not use this product in a humid environment or with your hands.
Do not reverse the polarity of the battery. Please install the battery correctly before closing the cover.
When using, carrying or storing, avoid severe vibration. Keep this item.
Package list:
1 *Neon tube tester
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Telephone Phone Network Cable Wire Line RJ Tracker Toner Tracer Tester 1.5kHz
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
*Easy to use
*Professional and safety tools for operators
*Designed to identify and track wires or cables within a group without damaging the insulation
*For telephone lines, it can identify certain states in the line and can help install, debug and maintain telephone lines
*Determine the continuity of cables or wires
*Trace cables or wires and diagnose breakpoints
*Receive audio signals on cables or wires (telephone lines)
*Identify the status of the work phone line (clear ringing, busy tone)
Specifications:
*Material: plastic
*Receiver size: about 235 * 35 mm
*Transmitter size: about 145 * 35 mm
*Frequency signal: 1.5kHz
*Receiving frequency range: 100-300kHZ
*Power supply: 2 x 9V batteries (not included)
Package Contents:
1 * generator
1 * Receiver
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Audio Signals Network Tester Plastic Network Cable Wire Line Quality Durable
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
*Easy to use
*Professional and safety tools for operators
*Designed to identify and track wires or cables within a group without damaging the insulation
*For telephone lines, it can identify certain states in the line and can help install, debug and maintain telephone lines
*Determine the continuity of cables or wires
*Trace cables or wires and diagnose breakpoints
*Receive audio signals on cables or wires (telephone lines)
*Identify the status of the work phone line (clear ringing, busy tone)
Specifications:
*Material: plastic
*Receiver size: about 235 * 35 mm
*Transmitter size: about 145 * 35 mm
*Frequency signal: 1.5kHz
*Receiving frequency range: 100-300kHZ
*Power supply: 2 x 9V batteries (not included)
Package Contents:
1 * generator
1 * Receiver
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Telephone Lan Network RJ45/11 Tester Tracker Cable Wire Finder Tracer Toner Test
Specifications:
Product name: Mlulti-purpose communication network wire tracker.
Power specs: DC, 9V laminated battery (Batteries are not included)
Max. operating current: Emitter ≤ 10mA, Receiver ≤ 30mA
Signal transmission format: Multi-frequency pulse
Signal output level: 8Vp-p
Signal transmission distance: ≥ 3km
Applicable Scope:
Telecom network line engineering and routine servicing; coputer network line maintenance; other metal wire engineering and maintenance.
Other Functions:
-Open Circuit and Short Circuit Test.
-DC Level Testing Function.
-Low Voltage Hinting Function.
-Headset Function.
In a noisy environment, you may put on your headset to operate the device to avoid external interference.
-Illuminating Lamp Function.
At night or in dark environment, you may move the illuminating lamp switch ,then the lamp will be on; if it is convenient for your work, you may lock the inching button.
-Volume Adjustment Function.
In Wire tracking, you may turn the volume knob on the receiver until the volume becomes proper.
Package Included:
1 x Emitter
1 x Receiver
1 x Earphone
1 x RJ11 adapter cable
1 x RJ45 adapter cable
1 x Clip connector
1 x Bag
1 x User manual
(Batteries are not included)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Tracker Circuit Tester Car Tracer Short & Open Scanner Set Flexible probe
Features:
This instrument is designed to identify and trace wires or cables without damaging the insulation.
You can also use it in checking for short circuit and loacting open circuit and so on.
There are a Sender and a Receiver included in the instrument.
HOW TO USE THE PROBE?
The probe of the Receiver is built of coiled steel and may be bent as needed, in order to reach wires in ongested or difficult areas.
Depending on the circuit characteristic and sensitivity settings, the probe will pick up the signal from ?the wire in a range of positions.
However, for the best possible ?range the Receiver's probe tip (black cap) should be positioned perpendicular (at 90o) to the wire being traced and either above or below it.
APPLICATION:
Checking for short circuit,Loating open circuit,Wire identification, Wire traceing,etc.
Widely applied in Checking Short Circuit, Locating Open Circuit, Wire Tracing, Wire Identification etc. Quickly and easily target broken wires, current leaks and so on
Specification:
Receiver:
On/Off button
Test button
Probe length: 7" flexible probe
Sender:
Tone/Off/Cont (Continuity) switch
Tone/Cont (Continuity) LEDs
Red and black test leads cable (61cm length, approximate)
Receiver Dimensions: 38.5 x 4 x 2.3cm (H x W x D, approximate)
Sender Dimensions: 6.5 x 5.6 x 2.1cm (H x W x D, approximate)
DC Voltage: Operates from 6 to 42 volts
Power : 2x9V battery (6F22) (Battery not provided by seller)
Red and black test leads cable (61cm length, approximate)
Receiver Dimensions: 38.5 x 4 x 2.3cm (H x W x D, approximate)
Sender Dimensions: 6.5 x 5.6 x 2.1cm (H x W x D, approximate)
Package list:
1 x Automotive Short and Open Finder?Sender
1 x Automotive Short and Open Finder?Reciever(with carrying bag)
English User Manual
Standard Factory Packaging
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Tracker Circuit Tester Car Tracer Finder Short & Open DC Flexible probe
Features:
This instrument is designed to identify and trace wires or cables without damaging the insulation.
You can also use it in checking for short circuit and loacting open circuit and so on.
There are a Sender and a Receiver included in the instrument.
HOW TO USE THE PROBE?
The probe of the Receiver is built of coiled steel and may be bent as needed, in order to reach wires in ongested or difficult areas.
Depending on the circuit characteristic and sensitivity settings, the probe will pick up the signal from ?the wire in a range of positions.
However, for the best possible ?range the Receiver's probe tip (black cap) should be positioned perpendicular (at 90o) to the wire being traced and either above or below it.
APPLICATION:
Checking for short circuit,Loating open circuit,Wire identification, Wire traceing,etc.
Widely applied in Checking Short Circuit, Locating Open Circuit, Wire Tracing, Wire Identification etc. Quickly and easily target broken wires, current leaks and so on
Specification:
Receiver:
On/Off button
Test button
Probe length: 7" flexible probe
Sender:
Tone/Off/Cont (Continuity) switch
Tone/Cont (Continuity) LEDs
Red and black test leads cable (61cm length, approximate)
Receiver Dimensions: 38.5 x 4 x 2.3cm (H x W x D, approximate)
Sender Dimensions: 6.5 x 5.6 x 2.1cm (H x W x D, approximate)
DC Voltage: Operates from 6 to 42 volts
Power : 2x9V battery (6F22) (Battery not provided by seller)
Red and black test leads cable (61cm length, approximate)
Receiver Dimensions: 38.5 x 4 x 2.3cm (H x W x D, approximate)
Sender Dimensions: 6.5 x 5.6 x 2.1cm (H x W x D, approximate)
Package list:
1 x Automotive Short and Open Finder?Sender
1 x Automotive Short and Open Finder?Reciever(with carrying bag)
English User Manual
Standard Factory Packaging
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Circuit Tester Finder Short & Open DC Scanner Set 7inch Flexible probe New
Features:
This instrument is designed to identify and trace wires or cables without damaging the insulation.
You can also use it in checking for short circuit and loacting open circuit and so on.
There are a Sender and a Receiver included in the instrument.
HOW TO USE THE PROBE?
The probe of the Receiver is built of coiled steel and may be bent as needed, in order to reach wires in ongested or difficult areas.
Depending on the circuit characteristic and sensitivity settings, the probe will pick up the signal from ?the wire in a range of positions.
However, for the best possible ?range the Receiver's probe tip (black cap) should be positioned perpendicular (at 90o) to the wire being traced and either above or below it.
APPLICATION:
Checking for short circuit,Loating open circuit,Wire identification, Wire traceing,etc.
Widely applied in Checking Short Circuit, Locating Open Circuit, Wire Tracing, Wire Identification etc. Quickly and easily target broken wires, current leaks and so on
Specification:
Receiver:
On/Off button
Test button
Probe length: 7" flexible probe
Sender:
Tone/Off/Cont (Continuity) switch
Tone/Cont (Continuity) LEDs
Red and black test leads cable (61cm length, approximate)
Receiver Dimensions: 38.5 x 4 x 2.3cm (H x W x D, approximate)
Sender Dimensions: 6.5 x 5.6 x 2.1cm (H x W x D, approximate)
DC Voltage: Operates from 6 to 42 volts
Power : 2x9V battery (6F22) (Battery not provided by seller)
Red and black test leads cable (61cm length, approximate)
Receiver Dimensions: 38.5 x 4 x 2.3cm (H x W x D, approximate)
Sender Dimensions: 6.5 x 5.6 x 2.1cm (H x W x D, approximate)
Package list:
1 x Automotive Short and Open Finder?Sender
1 x Automotive Short and Open Finder?Reciever(with carrying bag)
English User Manual
Standard Factory Packaging
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Automotive Short Open Finder Cable Circuit Car Wire Tracker Repair Tester Tool
Features:
This instrument is designed to identify and trace wires or cables without damaging the insulation.
You can also use it in checking for short circuit and loacting open circuit and so on.
There are a Sender and a Receiver included in the instrument.
HOW TO USE THE PROBE?
The probe of the Receiver is built of coiled steel and may be bent as needed, in order to reach wires in ongested or difficult areas.
Depending on the circuit characteristic and sensitivity settings, the probe will pick up the signal from ?the wire in a range of positions.
However, for the best possible ?range the Receiver's probe tip (black cap) should be positioned perpendicular (at 90o) to the wire being traced and either above or below it.
APPLICATION:
Checking for short circuit,Loating open circuit,Wire identification, Wire traceing,etc.
Widely applied in Checking Short Circuit, Locating Open Circuit, Wire Tracing, Wire Identification etc. Quickly and easily target broken wires, current leaks and so on
Specification:
Receiver:
On/Off button
Test button
Probe length: 7" flexible probe
Sender:
Tone/Off/Cont (Continuity) switch
Tone/Cont (Continuity) LEDs
Red and black test leads cable (61cm length, approximate)
Receiver Dimensions: 38.5 x 4 x 2.3cm (H x W x D, approximate)
Sender Dimensions: 6.5 x 5.6 x 2.1cm (H x W x D, approximate)
DC Voltage: Operates from 6 to 42 volts
Power : 2x9V battery (6F22) (Battery not provided by seller)
Red and black test leads cable (61cm length, approximate)
Receiver Dimensions: 38.5 x 4 x 2.3cm (H x W x D, approximate)
Sender Dimensions: 6.5 x 5.6 x 2.1cm (H x W x D, approximate)
Package list:
1 x Automotive Short and Open Finder?Sender
1 x Automotive Short and Open Finder?Reciever(with carrying bag)
English User Manual
Standard Factory Packaging
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Instant Car Circuit Tracer Finder Scanner Open & Short DC Circuit Tester Cable
Features:
This instrument is designed to identify and trace wires or cables without damaging the insulation.
You can also use it in checking for short circuit and loacting open circuit and so on.
There are a Sender and a Receiver included in the instrument.
HOW TO USE THE PROBE?
The probe of the Receiver is built of coiled steel and may be bent as needed, in order to reach wires in ongested or difficult areas.
Depending on the circuit characteristic and sensitivity settings, the probe will pick up the signal from ?the wire in a range of positions.
However, for the best possible ?range the Receiver's probe tip (black cap) should be positioned perpendicular (at 90o) to the wire being traced and either above or below it.
APPLICATION:
Checking for short circuit,Loating open circuit,Wire identification, Wire traceing,etc.
Widely applied in Checking Short Circuit, Locating Open Circuit, Wire Tracing, Wire Identification etc. Quickly and easily target broken wires, current leaks and so on
Specification:
Receiver:
On/Off button
Test button
Probe length: 7" flexible probe
Sender:
Tone/Off/Cont (Continuity) switch
Tone/Cont (Continuity) LEDs
Red and black test leads cable (61cm length, approximate)
Receiver Dimensions: 38.5 x 4 x 2.3cm (H x W x D, approximate)
Sender Dimensions: 6.5 x 5.6 x 2.1cm (H x W x D, approximate)
DC Voltage: Operates from 6 to 42 volts
Power : 2x9V battery (6F22) (Battery not provided by seller)
Red and black test leads cable (61cm length, approximate)
Receiver Dimensions: 38.5 x 4 x 2.3cm (H x W x D, approximate)
Sender Dimensions: 6.5 x 5.6 x 2.1cm (H x W x D, approximate)
Package list:
1 x Automotive Short and Open Finder?Sender
1 x Automotive Short and Open Finder?Reciever(with carrying bag)
English User Manual
Standard Factory Packaging
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Car Scanner Diagnostic Check Auto Fault Code Reader Engine Reset Tool OBD2 EOBD
Description:
Say goodbye to expensive automotive repair shop, car engine code reader simple and super easy to use.
This little device saves you the trips to your mechanic, lets you decide if it's something you can fix or need more advanced help. Save time.
Features:
2020 Newest Version OBD2 Car Scanner
This OBD Car Diagnostic Scanner is faster than any Bluetooth or WiFi OBD adapter on the market, it only take 3 seconds to read. This OBD II has Large LCD display (128 x 64 pixels) with contrast adjustment for direct display of test results.
Classic and portable design
Large LCD display with cable, OBD2 scan tool made of very thick flexible insulation. The portable size allows you to take your travels with you.
Full OBDII Diagnostic Scanner Function
Automotive code readers easily determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value,
engine coolant temperature, get engine Speed, read and clear error codes and support 6 languages: German, Dutch, English, Spanish, French, Italian.
Easy to Operate
Auto scan tool Get power directly from the OBDII data link connector in the vehicle without any battery or charger. Simply plug in the OBD interface to start diagnosis. We can clearly read the error codes from LCD display. Even a beginner can use this unit to read the error code, find out what the problem is and perhaps fix it.
Powerful Compatibility for Vehicles
OBD2 Car Scanner supports 9 protocols compatible with more vehicles, including vehicles equipped with next-generation protocols - Control Area Network (CAN).Applicable to 1996 US, 2000 EU and Asian cars, as well as newer OBD II and CAN domestic or imported vehicles. So you don't have to worry about his compatibility.
Specification:
Product mode: OBDII code reader
Product type: V310
Product dimensions: 155x85x25mm/6.1x3.3x1in
Product Weight: 200g/0.44lb
Storage temp: -30℃〜60℃
Software version: V310-FLASH-V01.01 V310-MCU-V06.1
Handware version:V.1
Operating voltage: DC 9〜16V provided via vehicle
Working current: 80mA
OBD connector: 16 PIN OBDII
Product Functions:
Read error and Clear diagnostic code--General and factory specified and display their meaning.
Easily determines the cause of the check engine light.
View freeze frame Information.
Displays I/M readiness Status.
Retrieves vehicle information.
Data stream.
Real time curve.
Retrieves car speed information.
DTC one click query
Supports OBD-II protocols:
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
â—†Where can I plug the OBD?
The OBD port is often under the dash, or under a panel below the handbrake in the center console.
â—†How to use it?
Simply plug into the OBD II port on your car and turn ignition on and you ready to go.
â—†Warm tips:
*Works on 12V provided by the vehicle battery ONLY.
*Must be 16 PIN OBD II protocol.
Package list :
1x Car Engine Diagnostic OBDII Reader
1x User Manual
Preview: