• -44%

Nincs szín - Áramkör tesztelő kereső Rövid és nyitott DC szkenner készlet 7 hüvelykes rugalmas szonda Új

Nincs szín - Áramkör tesztelő kereső Rövid és nyitott DC szkenner készlet 7 hüvelykes rugalmas szonda Új

2 322 Ft 44% megtakarítás
4 146 Ft
Nincs adó
Circuit Tester Finder Short & Open DC Scanner Set 7inch Flexible probe New
Features:
This instrument is designed to identify and trace wires or cables without damaging the insulation.
You can also use it in checking for short circuit and loacting open circuit and so on.
There are a Sender and a Receiver included in the instrument.
HOW TO USE THE PROBE?
The probe of the Receiver is built of coiled steel and may be bent as needed, in order to reach wires in ongested or difficult areas.
Depending on the circuit characteristic and sensitivity settings, the probe will pick up the signal from ?the wire in a range of positions.
However, for the best possible ?range the Receiver's probe tip (black cap) should be positioned perpendicular (at 90o) to the wire being traced and either above or below it.
APPLICATION:
Checking for short circuit,Loating open circuit,Wire identification, Wire traceing,etc.
Widely applied in Checking Short Circuit, Locating Open Circuit, Wire Tracing, Wire Identification etc. Quickly and easily target broken wires, current leaks and so on
Specification:
Receiver:
On/Off button
Test button
Probe length: 7" flexible probe
Sender:
Tone/Off/Cont (Continuity) switch
Tone/Cont (Continuity) LEDs
Red and black test leads cable (61cm length, approximate)
Receiver Dimensions: 38.5 x 4 x 2.3cm (H x W x D, approximate)
Sender Dimensions: 6.5 x 5.6 x 2.1cm (H x W x D, approximate)
DC Voltage: Operates from 6 to 42 volts
Power : 2x9V battery (6F22) (Battery not provided by seller)
Red and black test leads cable (61cm length, approximate)
Receiver Dimensions: 38.5 x 4 x 2.3cm (H x W x D, approximate)
Sender Dimensions: 6.5 x 5.6 x 2.1cm (H x W x D, approximate)
Package list:
1 x Automotive Short and Open Finder?Sender
1 x Automotive Short and Open Finder?Reciever(with carrying bag)
English User Manual
Standard Factory Packaging
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Mennyiség

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

A cím elején szereplő szín/minta/méret/típus kerül kiszállításra!
Circuit Tester Finder Short & Open DC Scanner Set 7inch Flexible probe New
Features:
This instrument is designed to identify and trace wires or cables without damaging the insulation.
You can also use it in checking for short circuit and loacting open circuit and so on.
There are a Sender and a Receiver included in the instrument.
HOW TO USE THE PROBE?
The probe of the Receiver is built of coiled steel and may be bent as needed, in order to reach wires in ongested or difficult areas.
Depending on the circuit characteristic and sensitivity settings, the probe will pick up the signal from ?the wire in a range of positions.
However, for the best possible ?range the Receiver's probe tip (black cap) should be positioned perpendicular (at 90o) to the wire being traced and either above or below it.
APPLICATION:
Checking for short circuit,Loating open circuit,Wire identification, Wire traceing,etc.
Widely applied in Checking Short Circuit, Locating Open Circuit, Wire Tracing, Wire Identification etc. Quickly and easily target broken wires, current leaks and so on
Specification:
Receiver:
On/Off button
Test button
Probe length: 7" flexible probe
Sender:
Tone/Off/Cont (Continuity) switch
Tone/Cont (Continuity) LEDs
Red and black test leads cable (61cm length, approximate)
Receiver Dimensions: 38.5 x 4 x 2.3cm (H x W x D, approximate)
Sender Dimensions: 6.5 x 5.6 x 2.1cm (H x W x D, approximate)
DC Voltage: Operates from 6 to 42 volts
Power : 2x9V battery (6F22) (Battery not provided by seller)
Red and black test leads cable (61cm length, approximate)
Receiver Dimensions: 38.5 x 4 x 2.3cm (H x W x D, approximate)
Sender Dimensions: 6.5 x 5.6 x 2.1cm (H x W x D, approximate)
Package list:
1 x Automotive Short and Open Finder?Sender
1 x Automotive Short and Open Finder?Reciever(with carrying bag)
English User Manual
Standard Factory Packaging
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
402515395835 - shoppingtest (27)
402515395835

Hasonló kategóriák mint 16 :

Reviews

Write your review

Nincs szín - Áramkör tesztelő kereső Rövid és nyitott DC szkenner készlet 7 hüvelykes rugalmas szonda Új

Circuit Tester Finder Short & Open DC Scanner Set 7inch Flexible probe New
Features:
This instrument is designed to identify and trace wires or cables without damaging the insulation.
You can also use it in checking for short circuit and loacting open circuit and so on.
There are a Sender and a Receiver included in the instrument.
HOW TO USE THE PROBE?
The probe of the Receiver is built of coiled steel and may be bent as needed, in order to reach wires in ongested or difficult areas.
Depending on the circuit characteristic and sensitivity settings, the probe will pick up the signal from ?the wire in a range of positions.
However, for the best possible ?range the Receiver's probe tip (black cap) should be positioned perpendicular (at 90o) to the wire being traced and either above or below it.
APPLICATION:
Checking for short circuit,Loating open circuit,Wire identification, Wire traceing,etc.
Widely applied in Checking Short Circuit, Locating Open Circuit, Wire Tracing, Wire Identification etc. Quickly and easily target broken wires, current leaks and so on
Specification:
Receiver:
On/Off button
Test button
Probe length: 7" flexible probe
Sender:
Tone/Off/Cont (Continuity) switch
Tone/Cont (Continuity) LEDs
Red and black test leads cable (61cm length, approximate)
Receiver Dimensions: 38.5 x 4 x 2.3cm (H x W x D, approximate)
Sender Dimensions: 6.5 x 5.6 x 2.1cm (H x W x D, approximate)
DC Voltage: Operates from 6 to 42 volts
Power : 2x9V battery (6F22) (Battery not provided by seller)
Red and black test leads cable (61cm length, approximate)
Receiver Dimensions: 38.5 x 4 x 2.3cm (H x W x D, approximate)
Sender Dimensions: 6.5 x 5.6 x 2.1cm (H x W x D, approximate)
Package list:
1 x Automotive Short and Open Finder?Sender
1 x Automotive Short and Open Finder?Reciever(with carrying bag)
English User Manual
Standard Factory Packaging
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Write your review