- -44%
Nincs szín - 4,3 " LCD NanoVNA-F vektor hálózati antennanalizátor 50KHz-1000MHz VNA UHF VHF HF
Nincs szín - 4,3 " LCD NanoVNA-F vektor hálózati antennanalizátor 50KHz-1000MHz VNA UHF VHF HF
6 769 Ft
44% megtakarítás
12 088 Ft
Nincs adó
4.3" LCD NanoVNA-F Vector Network Antenna Analyzer 50KHz-
1000MHz VNA UHF VHF HF
Feature:1. Using4.3‑inch IPS TFT LCD resistive touch screen, it has a large viewing angle and can be seen clearly even in strong outdoor light.
2. Change the Lipo charging IC to IP5306 (with 2A high charging current), thereby shortening the charging time.
3. Use larger and better operating levels, larger and better power switch, more dependable.
4. Support Chinese and English menu switching, bring much convenience for you.
5. Upgrade the user program through a virtual U disk (internal 16MB for SPI flash memory).
6. Standard aluminum casing protects the SMA head and reduces the interference of external electromagnetic waves on the instrument.
7. The measurement range of NanoVNA‑F is 50k‑1GHz. Use the harmonics of the clock chip SI5351 to measure frequencies up to 1000MHz. At 600M‑1GHz, the dynamic range of S11 is 40dB (VSWR is less than 1.02).
8. The RF front end is designed with metal shielding, so that the dynamic range of S21 in the entire frequency range is better than 60dB.
Specification:
Condition: 100% Brand New
Item Type: Networks Analyzer
Material: PCB
Color: Black
Measuring Frequency: 50KHz-1000MHz
RF Output: -13dBm (maximum -9dBm)
Frequency Accuracy: <0.5PPM
Port Swr: <1.1
Display: 4.3 Inches IPS TFT (800 x 480)
USB Interface: USB Type-C
Communication Method: CDC (serial)
Power Consumption: USB 5V 200mA,can be powered by battery, maximum charging current 2A
Output Capacity: 5V / 1A
Number of Calibration Points: 101
Scanning Points: 101
Display Tracking: 4, Mark: 4, Setting Save: 5
Scan Time: About 1.9s/time (50khz-1000mhz Full Frequency Band)
Application: Measure S parameters, voltage standing waves ratio SWR, phase map, group delay, Smith chart, etc.
Package List:
1 x Analyzer
2 x 200mm/7.9in SMA-JJ RG316 Cable
6 x Screw
1 x Data Cable
1 x Instruction
1000MHz VNA UHF VHF HF
Feature:1. Using4.3‑inch IPS TFT LCD resistive touch screen, it has a large viewing angle and can be seen clearly even in strong outdoor light.
2. Change the Lipo charging IC to IP5306 (with 2A high charging current), thereby shortening the charging time.
3. Use larger and better operating levels, larger and better power switch, more dependable.
4. Support Chinese and English menu switching, bring much convenience for you.
5. Upgrade the user program through a virtual U disk (internal 16MB for SPI flash memory).
6. Standard aluminum casing protects the SMA head and reduces the interference of external electromagnetic waves on the instrument.
7. The measurement range of NanoVNA‑F is 50k‑1GHz. Use the harmonics of the clock chip SI5351 to measure frequencies up to 1000MHz. At 600M‑1GHz, the dynamic range of S11 is 40dB (VSWR is less than 1.02).
8. The RF front end is designed with metal shielding, so that the dynamic range of S21 in the entire frequency range is better than 60dB.
Specification:
Condition: 100% Brand New
Item Type: Networks Analyzer
Material: PCB
Color: Black
Measuring Frequency: 50KHz-1000MHz
RF Output: -13dBm (maximum -9dBm)
Frequency Accuracy: <0.5PPM
Port Swr: <1.1
Display: 4.3 Inches IPS TFT (800 x 480)
USB Interface: USB Type-C
Communication Method: CDC (serial)
Power Consumption: USB 5V 200mA,can be powered by battery, maximum charging current 2A
Output Capacity: 5V / 1A
Number of Calibration Points: 101
Scanning Points: 101
Display Tracking: 4, Mark: 4, Setting Save: 5
Scan Time: About 1.9s/time (50khz-1000mhz Full Frequency Band)
Application: Measure S parameters, voltage standing waves ratio SWR, phase map, group delay, Smith chart, etc.
Package List:
1 x Analyzer
2 x 200mm/7.9in SMA-JJ RG316 Cable
6 x Screw
1 x Data Cable
1 x Instruction
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
