• -44%

Nincs szín - Teljesen hegesztett összeszerelt DSO138 2,4 &quot TFT digitális oszcilloszkóp (1Msps) Szonda Új

Nincs szín - Teljesen hegesztett összeszerelt DSO138 2,4 &quot TFT digitális oszcilloszkóp (1Msps) Szonda Új

1 359 Ft 44% megtakarítás
2 426 Ft
Nincs adó
Fully Welded Assembled DSO138 2.4" TFT Digital Oscilloscope (1Msps) Probe New
Product description:
This is welded (assembled) and can be used directly.
Functions of DSO138 oscilloscope production kit:Electronic product training, complete and detailed descriptive information (such as diagrams, instructions, etc.), make the success rate very high.
The diversity of component types is for students to identify elements, online element welding, and training on welding SMD components.
Students can simultaneously enter the practical tools for making audio, video synchronization, low-frequency switching power supply, infrared receiver transmitter signal waveforms and many other occasions to conduct effective observation and measurement, increase interest in learning, and improve learning results.
The kit uses the ARM Cortex-M3 processor (STM32F103C8) and includes a 2.4-inch color TFT display, which can be used as a test ARM development board.
The available resources and the abilities of friends can be based on the secondary development kit, for example, they can be changed to millivolt meters, data loggers, etc.
The circuit is simple, reliable, and inexpensive
Product parameters:
Maximum real-time sampling rate: 1Msps
Precision: 12 bits
Sampling buffer depth: 1024 bytes
Analog bandwidth: 0-200KHz
Vertical sensitivity: 10mV / Div-5V / Div (1-2-5 level)
Adjustable vertical displacement, with instructions
Input impedance: 1MΩ
Maximum input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
Coupling modes include DC / AC / GND
Horizontal time base range: 10ÎĽs/ div-50s / div (1-2-5 level)
With automatic, regular and single shot modes, easy to capture torque waveform
Available rising or falling edge trigger
Adjustable trigger level position with instructions
Trigger waveform that can be observed before (negative delay)
The waveform display can be frozen at any time (hold function)
Comes with 1Hz /3.3V square wave test signal source
Package includes:
1* DSO138 digital oscilloscope
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Mennyiség

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

A cím elején szereplő szín/minta/méret/típus kerül kiszállításra!
Fully Welded Assembled DSO138 2.4" TFT Digital Oscilloscope (1Msps) Probe New
Product description:
This is welded (assembled) and can be used directly.
Functions of DSO138 oscilloscope production kit:Electronic product training, complete and detailed descriptive information (such as diagrams, instructions, etc.), make the success rate very high.
The diversity of component types is for students to identify elements, online element welding, and training on welding SMD components.
Students can simultaneously enter the practical tools for making audio, video synchronization, low-frequency switching power supply, infrared receiver transmitter signal waveforms and many other occasions to conduct effective observation and measurement, increase interest in learning, and improve learning results.
The kit uses the ARM Cortex-M3 processor (STM32F103C8) and includes a 2.4-inch color TFT display, which can be used as a test ARM development board.
The available resources and the abilities of friends can be based on the secondary development kit, for example, they can be changed to millivolt meters, data loggers, etc.
The circuit is simple, reliable, and inexpensive
Product parameters:
Maximum real-time sampling rate: 1Msps
Precision: 12 bits
Sampling buffer depth: 1024 bytes
Analog bandwidth: 0-200KHz
Vertical sensitivity: 10mV / Div-5V / Div (1-2-5 level)
Adjustable vertical displacement, with instructions
Input impedance: 1MΩ
Maximum input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
Coupling modes include DC / AC / GND
Horizontal time base range: 10ÎĽs/ div-50s / div (1-2-5 level)
With automatic, regular and single shot modes, easy to capture torque waveform
Available rising or falling edge trigger
Adjustable trigger level position with instructions
Trigger waveform that can be observed before (negative delay)
The waveform display can be frozen at any time (hold function)
Comes with 1Hz /3.3V square wave test signal source
Package includes:
1* DSO138 digital oscilloscope
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
402547322187 - shoppingtest (27)
402547322187

Hasonló kategóriák mint 16 :

Reviews

Write your review

Nincs szín - Teljesen hegesztett összeszerelt DSO138 2,4 &quot TFT digitális oszcilloszkóp (1Msps) Szonda Új

Fully Welded Assembled DSO138 2.4" TFT Digital Oscilloscope (1Msps) Probe New
Product description:
This is welded (assembled) and can be used directly.
Functions of DSO138 oscilloscope production kit:Electronic product training, complete and detailed descriptive information (such as diagrams, instructions, etc.), make the success rate very high.
The diversity of component types is for students to identify elements, online element welding, and training on welding SMD components.
Students can simultaneously enter the practical tools for making audio, video synchronization, low-frequency switching power supply, infrared receiver transmitter signal waveforms and many other occasions to conduct effective observation and measurement, increase interest in learning, and improve learning results.
The kit uses the ARM Cortex-M3 processor (STM32F103C8) and includes a 2.4-inch color TFT display, which can be used as a test ARM development board.
The available resources and the abilities of friends can be based on the secondary development kit, for example, they can be changed to millivolt meters, data loggers, etc.
The circuit is simple, reliable, and inexpensive
Product parameters:
Maximum real-time sampling rate: 1Msps
Precision: 12 bits
Sampling buffer depth: 1024 bytes
Analog bandwidth: 0-200KHz
Vertical sensitivity: 10mV / Div-5V / Div (1-2-5 level)
Adjustable vertical displacement, with instructions
Input impedance: 1MΩ
Maximum input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
Coupling modes include DC / AC / GND
Horizontal time base range: 10ÎĽs/ div-50s / div (1-2-5 level)
With automatic, regular and single shot modes, easy to capture torque waveform
Available rising or falling edge trigger
Adjustable trigger level position with instructions
Trigger waveform that can be observed before (negative delay)
The waveform display can be frozen at any time (hold function)
Comes with 1Hz /3.3V square wave test signal source
Package includes:
1* DSO138 digital oscilloscope
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Write your review