Elemzők és adatgyűjtés

1X DSO138 Fully Welded 2.4 Inches TFT Digital Oscilloscope Probe Kit Shell DC 9V
Features:
* Component species diversity for students to identify elements ,inline elements welding, soldering SMD components training.
* Students can get in at the same time making a practical tool for audio, video synchronization , low-frequency switching power supply ,infrared receiver transmitter signal waveform and many other occasions.
* This set help effectively increase interest in learning, improve learning outcomes .
* Using ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4inch color TFT display can be used as test ARM development board .
* With automatic, regular and one-shot mode , easy to capture the moment waveform
* Available rising or falling edge trigger
* Adjustable trigger level position , and with instructions
* Observable trigger waveform before ( negative delay )
* Can freeze at any time waveform display (HOLD function )
* Comes 1Hz /3.3V square wave test signal source
* These need to be installed by yourselves.
Specifications:
* Power Output:DC 9V
* Maximum real-time sampling rate: 1Msps
* Accuracy: 12Bit
* Sampling buffer depth: 1024 bytes
* Analog bandwidth: 0-200KHz
* Vertical Sensitivity: 10mV / Div - 5V / Div (1-2-5 progressive manner)
* Input impedance : 1MΩ
* Maximum input voltage : 50Vpp (1: 1 probe ), 400Vpp (10: 1 probe )
* Coupling modes include DC / AC / GND
* The horizontal time base range : 10ÎĽs / Div - 50s / Div ( 1-2-5 progressive manner )
Package contents:
1* Soldered DSO138 2.4" TFT Digital Oscilloscope
1* Acrylic Case Kits
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

2.4" LCD Display DSO150 Digital Oscilloscope Assembled With Case Test Clip
Features:
*Has automatic, conventional and single trigger mode, convenient to capture the instantaneous waveform.
*Digital displays waveform parameters, such as frequency, cycle, pulse width, duty cycle, maximum, minimum, average, peak value and effective value.
*Can be triggered by a rise or drop edge.
*The trigger level position is adjustable and with instructions.
*Vertical displacement is adjustable and with instructions.
*Can freeze waveform display at any time.
*Waveforms before observable triggers.
*Test signal source with 1KHz /3.3V square wave.
*Save/tune out the waveform, the shutdown waveform does not disappear.
*2.4-inch color TFT LCD with 320 x 240 resolution.
*100% brand new and high quality.
Specification:
*Maximum Real Time Sampling Rate: 1Msps
*Precision: 12Bit
*Number of Channel: 1
*Sampling Buffer Depth: 1024 bytes
*Analog Band Width: 0~200KHz
*Vertical Sensitivity: 5mV/Div~20V/Div (progressive by 1-2-5)
*Trigger Position: 1/2 of buffer size fixed
*Sensitivity Error: < 5%
*Input Impedance: 1M Omega
*Maximum Input Voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
*Coupling Methods: DC/AC/GND
*Horizontal Time Base Range: 10 s/Div~50s/Div (progressive by 1-2-5)
*Supply Current: 120mA
*Power Supply: 9V 1A power adapter, 5.5*2.1mm connector(not include).
Package Contents:
1 * Fully Welded Assembled Digital Oscilloscope
1 * Probe
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Oscilloscope Fully Welded Assembled Probe DSO150 Display Accs Practical
Features:
*Has automatic, conventional and single trigger mode, convenient to capture the instantaneous waveform.
*Digital displays waveform parameters, such as frequency, cycle, pulse width, duty cycle, maximum, minimum, average, peak value and effective value.
*Can be triggered by a rise or drop edge.
*The trigger level position is adjustable and with instructions.
*Vertical displacement is adjustable and with instructions.
*Can freeze waveform display at any time.
*Waveforms before observable triggers.
*Test signal source with 1KHz /3.3V square wave.
*Save/tune out the waveform, the shutdown waveform does not disappear.
*2.4-inch color TFT LCD with 320 x 240 resolution.
*100% brand new and high quality.
Specification:
*Maximum Real Time Sampling Rate: 1Msps
*Precision: 12Bit
*Number of Channel: 1
*Sampling Buffer Depth: 1024 bytes
*Analog Band Width: 0~200KHz
*Vertical Sensitivity: 5mV/Div~20V/Div (progressive by 1-2-5)
*Trigger Position: 1/2 of buffer size fixed
*Sensitivity Error: < 5%
*Input Impedance: 1M Omega
*Maximum Input Voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
*Coupling Methods: DC/AC/GND
*Horizontal Time Base Range: 10 s/Div~50s/Div (progressive by 1-2-5)
*Supply Current: 120mA
*Power Supply: 9V 1A power adapter, 5.5*2.1mm connector(not include).
Package Contents:
1 * Fully Welded Assembled Digital Oscilloscope
1 * Probe
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Oscilloscope Probe Fully Welded Assembled High Quality Replaces Stock
Features:
*Has automatic, conventional and single trigger mode, convenient to capture the instantaneous waveform.
*Digital displays waveform parameters, such as frequency, cycle, pulse width, duty cycle, maximum, minimum, average, peak value and effective value.
*Can be triggered by a rise or drop edge.
*The trigger level position is adjustable and with instructions.
*Vertical displacement is adjustable and with instructions.
*Can freeze waveform display at any time.
*Waveforms before observable triggers.
*Test signal source with 1KHz /3.3V square wave.
*Save/tune out the waveform, the shutdown waveform does not disappear.
*2.4-inch color TFT LCD with 320 x 240 resolution.
*100% brand new and high quality.
Specification:
*Maximum Real Time Sampling Rate: 1Msps
*Precision: 12Bit
*Number of Channel: 1
*Sampling Buffer Depth: 1024 bytes
*Analog Band Width: 0~200KHz
*Vertical Sensitivity: 5mV/Div~20V/Div (progressive by 1-2-5)
*Trigger Position: 1/2 of buffer size fixed
*Sensitivity Error: < 5%
*Input Impedance: 1M Omega
*Maximum Input Voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
*Coupling Methods: DC/AC/GND
*Horizontal Time Base Range: 10 s/Div~50s/Div (progressive by 1-2-5)
*Supply Current: 120mA
*Power Supply: 9V 1A power adapter, 5.5*2.1mm connector(not include).
Package Contents:
1 * Fully Welded Assembled Digital Oscilloscope
1 * Probe
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

With Case Test Clip Oscilloscope Probe 2.4" LCD High Quality Replaces Stock
Features:
*Has automatic, conventional and single trigger mode, convenient to capture the instantaneous waveform.
*Digital displays waveform parameters, such as frequency, cycle, pulse width, duty cycle, maximum, minimum, average, peak value and effective value.
*Can be triggered by a rise or drop edge.
*The trigger level position is adjustable and with instructions.
*Vertical displacement is adjustable and with instructions.
*Can freeze waveform display at any time.
*Waveforms before observable triggers.
*Test signal source with 1KHz /3.3V square wave.
*Save/tune out the waveform, the shutdown waveform does not disappear.
*2.4-inch color TFT LCD with 320 x 240 resolution.
*100% brand new and high quality.
Specification:
*Maximum Real Time Sampling Rate: 1Msps
*Precision: 12Bit
*Number of Channel: 1
*Sampling Buffer Depth: 1024 bytes
*Analog Band Width: 0~200KHz
*Vertical Sensitivity: 5mV/Div~20V/Div (progressive by 1-2-5)
*Trigger Position: 1/2 of buffer size fixed
*Sensitivity Error: < 5%
*Input Impedance: 1M Omega
*Maximum Input Voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
*Coupling Methods: DC/AC/GND
*Horizontal Time Base Range: 10 s/Div~50s/Div (progressive by 1-2-5)
*Supply Current: 120mA
*Power Supply: 9V 1A power adapter, 5.5*2.1mm connector(not include).
Package Contents:
1 * Fully Welded Assembled Digital Oscilloscope
1 * Probe
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

With Case Test Clip Oscilloscope Assembled Probe 2.4" Part Tool Latest
Features:
*Has automatic, conventional and single trigger mode, convenient to capture the instantaneous waveform.
*Digital displays waveform parameters, such as frequency, cycle, pulse width, duty cycle, maximum, minimum, average, peak value and effective value.
*Can be triggered by a rise or drop edge.
*The trigger level position is adjustable and with instructions.
*Vertical displacement is adjustable and with instructions.
*Can freeze waveform display at any time.
*Waveforms before observable triggers.
*Test signal source with 1KHz /3.3V square wave.
*Save/tune out the waveform, the shutdown waveform does not disappear.
*2.4-inch color TFT LCD with 320 x 240 resolution.
*100% brand new and high quality.
Specification:
*Maximum Real Time Sampling Rate: 1Msps
*Precision: 12Bit
*Number of Channel: 1
*Sampling Buffer Depth: 1024 bytes
*Analog Band Width: 0~200KHz
*Vertical Sensitivity: 5mV/Div~20V/Div (progressive by 1-2-5)
*Trigger Position: 1/2 of buffer size fixed
*Sensitivity Error: < 5%
*Input Impedance: 1M Omega
*Maximum Input Voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
*Coupling Methods: DC/AC/GND
*Horizontal Time Base Range: 10 s/Div~50s/Div (progressive by 1-2-5)
*Supply Current: 120mA
*Power Supply: 9V 1A power adapter, 5.5*2.1mm connector(not include).
Package Contents:
1 * Fully Welded Assembled Digital Oscilloscope
1 * Probe
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

With Case Test Clip Oscilloscope Fully Welded Digital Part Practical Tool
Features:
*Has automatic, conventional and single trigger mode, convenient to capture the instantaneous waveform.
*Digital displays waveform parameters, such as frequency, cycle, pulse width, duty cycle, maximum, minimum, average, peak value and effective value.
*Can be triggered by a rise or drop edge.
*The trigger level position is adjustable and with instructions.
*Vertical displacement is adjustable and with instructions.
*Can freeze waveform display at any time.
*Waveforms before observable triggers.
*Test signal source with 1KHz /3.3V square wave.
*Save/tune out the waveform, the shutdown waveform does not disappear.
*2.4-inch color TFT LCD with 320 x 240 resolution.
*100% brand new and high quality.
Specification:
*Maximum Real Time Sampling Rate: 1Msps
*Precision: 12Bit
*Number of Channel: 1
*Sampling Buffer Depth: 1024 bytes
*Analog Band Width: 0~200KHz
*Vertical Sensitivity: 5mV/Div~20V/Div (progressive by 1-2-5)
*Trigger Position: 1/2 of buffer size fixed
*Sensitivity Error: < 5%
*Input Impedance: 1M Omega
*Maximum Input Voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
*Coupling Methods: DC/AC/GND
*Horizontal Time Base Range: 10 s/Div~50s/Div (progressive by 1-2-5)
*Supply Current: 120mA
*Power Supply: 9V 1A power adapter, 5.5*2.1mm connector(not include).
Package Contents:
1 * Fully Welded Assembled Digital Oscilloscope
1 * Probe
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

New Assembled DSO150 Digital Oscilloscope 2.4 Inch LCD Display W/ Clip Power
Product description:
With automatic, regular and single trigger modes, it is convenient to capture instantaneous waveforms
Digital display of waveform parameters, such as frequency, period, pulse width, duty cycle, maximum value, minimum value, average value, peak value and effective value
Can be triggered by rising or falling edge
Trigger level position is adjustable, with indication
Adjustable vertical displacement, with instructions
Observe the waveform before the trigger
Freeze waveform display at any time
The test signal source is 1KHz /3.3V square wave
Save/recall the waveform, the waveform will not disappear when turned off
Product parameters:
2.4-inch color TFT LCD with a resolution of 320 x 240
Maximum real-time sampling rate: 1Msps
Precision: 12Bit
Sampling buffer depth: 1024 bytes
Number of channels: 1
Analog bandwidth: 0~200KHz
Vertical sensitivity: 5mV / Div ~ 20V / Div (gradually 1-2-5)
Trigger position: 1/2 of the fixed buffer size
Sensitivity error: <5%
Input impedance: 1MΩ
Power supply: 9V DC
Power supply current: 120mA
Maximum input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
Coupling mode: DC / AC / GND
Horizontal time base range: 10 s / Div~50s / Div (press 1-2-5)
Package Included:
1 newly assembled digital oscilloscope
1 x probe
1 x 9V 1A power adapter
Note: There is no battery in this oscilloscope, it must be connected to a power adapter.
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

0-200khz Oscilloscope DC 9v Standard Probe DSO-Shell Replacement Useful
Features:
*DSO-Shell (DSO150) Oscilloscope Full Assembled With P6020 BNC Standard Probe
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Using ARM Cortex-M3 processor (STM32F103C8), built-in 2.4-inch color TFT display
*Based on secondary development, this tool kit, for example, can be changed to a millivolt table, data logger
*With instructions, easy to install and operate
*Auto/Normal/Single Trigger mode for easy capture of instantaneous waveforms
*Available rising or falling edge triggers
*Waveforms that can be observed before triggering (negative delay)
*The waveform display can be frozen at any time (hold function)
*Waveform parameter digital display, including frequency, period, pulse
Width, duty cycle, maximum/minimum/average weight./maximum peak/virtual value
*Waveform storage function: no loss of waveform after power off
*Short circuit, open circuit detection: help users find welding errors
*TFT controller identification function
*SMD has been soldered, more suitable for electronic beginners
Specifications:
*Maximum real-time sampling rate: 1 MSa/s
*Analog bandwidth: 0 - 200khz
*Sensitivity range: 5 - 20mv / div
*Maximum input voltage: 50 Vpk (1X probe)
*Input impedance: 1M ohm / 20pF
*Accuracy: 12 digits
*Record length: 1024 points
*Coupling mode: DC / AC / GND
*Time base range: 500s/Div - 10us / Div
*Trigger mode: automatic, normal, one shot
*Trigger position: buffer center
*Power supply voltage: DC 9v (8 - 10v)
*Current consumption: ~ 120ma @ 9v
*Motherboard size: 94 x 65 mm / 3.7 x 2.56 inches(Approx.)
*Analog board size: 65 x 47 mm / 2.56 x 1.85 inches(Approx.)
*Screen size: 52 x 40 mm / 2 x 1.57 inches(Approx.)
Package Contents:
1*Oscilloscope
1*Probe
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

DC 9v Oscilloscope 0-200khz Standard Probe DSO-Shell Replacement Practical
Features:
*DSO-Shell (DSO150) Oscilloscope Full Assembled With P6020 BNC Standard Probe
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Using ARM Cortex-M3 processor (STM32F103C8), built-in 2.4-inch color TFT display
*Based on secondary development, this tool kit, for example, can be changed to a millivolt table, data logger
*With instructions, easy to install and operate
*Auto/Normal/Single Trigger mode for easy capture of instantaneous waveforms
*Available rising or falling edge triggers
*Waveforms that can be observed before triggering (negative delay)
*The waveform display can be frozen at any time (hold function)
*Waveform parameter digital display, including frequency, period, pulse
Width, duty cycle, maximum/minimum/average weight./maximum peak/virtual value
*Waveform storage function: no loss of waveform after power off
*Short circuit, open circuit detection: help users find welding errors
*TFT controller identification function
*SMD has been soldered, more suitable for electronic beginners
Specifications:
*Maximum real-time sampling rate: 1 MSa/s
*Analog bandwidth: 0 - 200khz
*Sensitivity range: 5 - 20mv / div
*Maximum input voltage: 50 Vpk (1X probe)
*Input impedance: 1M ohm / 20pF
*Accuracy: 12 digits
*Record length: 1024 points
*Coupling mode: DC / AC / GND
*Time base range: 500s/Div - 10us / Div
*Trigger mode: automatic, normal, one shot
*Trigger position: buffer center
*Power supply voltage: DC 9v (8 - 10v)
*Current consumption: ~ 120ma @ 9v
*Motherboard size: 94 x 65 mm / 3.7 x 2.56 inches(Approx.)
*Analog board size: 65 x 47 mm / 2.56 x 1.85 inches(Approx.)
*Screen size: 52 x 40 mm / 2 x 1.57 inches(Approx.)
Package Contents:
1*Oscilloscope
1*Probe
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Oscilloscope Analog 94x65mm Standard Probe DSO-Shell Replacement Useful
Features:
*DSO-Shell (DSO150) Oscilloscope Full Assembled With P6020 BNC Standard Probe
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Using ARM Cortex-M3 processor (STM32F103C8), built-in 2.4-inch color TFT display
*Based on secondary development, this tool kit, for example, can be changed to a millivolt table, data logger
*With instructions, easy to install and operate
*Auto/Normal/Single Trigger mode for easy capture of instantaneous waveforms
*Available rising or falling edge triggers
*Waveforms that can be observed before triggering (negative delay)
*The waveform display can be frozen at any time (hold function)
*Waveform parameter digital display, including frequency, period, pulse
Width, duty cycle, maximum/minimum/average weight./maximum peak/virtual value
*Waveform storage function: no loss of waveform after power off
*Short circuit, open circuit detection: help users find welding errors
*TFT controller identification function
*SMD has been soldered, more suitable for electronic beginners
Specifications:
*Maximum real-time sampling rate: 1 MSa/s
*Analog bandwidth: 0 - 200khz
*Sensitivity range: 5 - 20mv / div
*Maximum input voltage: 50 Vpk (1X probe)
*Input impedance: 1M ohm / 20pF
*Accuracy: 12 digits
*Record length: 1024 points
*Coupling mode: DC / AC / GND
*Time base range: 500s/Div - 10us / Div
*Trigger mode: automatic, normal, one shot
*Trigger position: buffer center
*Power supply voltage: DC 9v (8 - 10v)
*Current consumption: ~ 120ma @ 9v
*Motherboard size: 94 x 65 mm / 3.7 x 2.56 inches(Approx.)
*Analog board size: 65 x 47 mm / 2.56 x 1.85 inches(Approx.)
*Screen size: 52 x 40 mm / 2 x 1.57 inches(Approx.)
Package Contents:
1*Oscilloscope
1*Probe
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

0-200khz Oscilloscope Set 94x65mm Standard Probe DSO-Shell Replacement Useful
Features:
*DSO-Shell (DSO150) Oscilloscope Full Assembled With P6020 BNC Standard Probe
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Using ARM Cortex-M3 processor (STM32F103C8), built-in 2.4-inch color TFT display
*Based on secondary development, this tool kit, for example, can be changed to a millivolt table, data logger
*With instructions, easy to install and operate
*Auto/Normal/Single Trigger mode for easy capture of instantaneous waveforms
*Available rising or falling edge triggers
*Waveforms that can be observed before triggering (negative delay)
*The waveform display can be frozen at any time (hold function)
*Waveform parameter digital display, including frequency, period, pulse
Width, duty cycle, maximum/minimum/average weight./maximum peak/virtual value
*Waveform storage function: no loss of waveform after power off
*Short circuit, open circuit detection: help users find welding errors
*TFT controller identification function
*SMD has been soldered, more suitable for electronic beginners
Specifications:
*Maximum real-time sampling rate: 1 MSa/s
*Analog bandwidth: 0 - 200khz
*Sensitivity range: 5 - 20mv / div
*Maximum input voltage: 50 Vpk (1X probe)
*Input impedance: 1M ohm / 20pF
*Accuracy: 12 digits
*Record length: 1024 points
*Coupling mode: DC / AC / GND
*Time base range: 500s/Div - 10us / Div
*Trigger mode: automatic, normal, one shot
*Trigger position: buffer center
*Power supply voltage: DC 9v (8 - 10v)
*Current consumption: ~ 120ma @ 9v
*Motherboard size: 94 x 65 mm / 3.7 x 2.56 inches(Approx.)
*Analog board size: 65 x 47 mm / 2.56 x 1.85 inches(Approx.)
*Screen size: 52 x 40 mm / 2 x 1.57 inches(Approx.)
Package Contents:
1*Oscilloscope
1*Probe
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Features:
*DSO-Shell (DSO150) Oscilloscope Full Assembled With P6020 BNC Standard Probe
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Using ARM Cortex-M3 processor (STM32F103C8), built-in 2.4-inch color TFT display
*Based on secondary development, this tool kit, for example, can be changed to a millivolt table, data logger
*With instructions, easy to install and operate
*Auto/Normal/Single Trigger mode for easy capture of instantaneous waveforms
*Available rising or falling edge triggers
*Waveforms that can be observed before triggering (negative delay)
*The waveform display can be frozen at any time (hold function)
*Waveform parameter digital display, including frequency, period, pulse
Width, duty cycle, maximum/minimum/average weight./maximum peak/virtual value
*Waveform storage function: no loss of waveform after power off
*Short circuit, open circuit detection: help users find welding errors
*TFT controller identification function
*SMD has been soldered, more suitable for electronic beginners
Specifications:
*Maximum real-time sampling rate: 1 MSa/s
*Analog bandwidth: 0 - 200khz
*Sensitivity range: 5 - 20mv / div
*Maximum input voltage: 50 Vpk (1X probe)
*Input impedance: 1M ohm / 20pF
*Accuracy: 12 digits
*Record length: 1024 points
*Coupling mode: DC / AC / GND
*Time base range: 500s/Div - 10us / Div
*Trigger mode: automatic, normal, one shot
*Trigger position: buffer center
*Power supply voltage: DC 9v (8 - 10v)
*Current consumption: ~ 120ma @ 9v
*Motherboard size: 94 x 65 mm / 3.7 x 2.56 inches(Approx.)
*Analog board size: 65 x 47 mm / 2.56 x 1.85 inches(Approx.)
*Screen size: 52 x 40 mm / 2 x 1.57 inches(Approx.)
Package Contents:
1*Oscilloscope
1*Probe
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

0-200khz Oscilloscope Analog Set 94x65mm Standard Probe DSO-Shell Useful
Features:
*DSO-Shell (DSO150) Oscilloscope Full Assembled With P6020 BNC Standard Probe
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Using ARM Cortex-M3 processor (STM32F103C8), built-in 2.4-inch color TFT display
*Based on secondary development, this tool kit, for example, can be changed to a millivolt table, data logger
*With instructions, easy to install and operate
*Auto/Normal/Single Trigger mode for easy capture of instantaneous waveforms
*Available rising or falling edge triggers
*Waveforms that can be observed before triggering (negative delay)
*The waveform display can be frozen at any time (hold function)
*Waveform parameter digital display, including frequency, period, pulse
Width, duty cycle, maximum/minimum/average weight./maximum peak/virtual value
*Waveform storage function: no loss of waveform after power off
*Short circuit, open circuit detection: help users find welding errors
*TFT controller identification function
*SMD has been soldered, more suitable for electronic beginners
Specifications:
*Maximum real-time sampling rate: 1 MSa/s
*Analog bandwidth: 0 - 200khz
*Sensitivity range: 5 - 20mv / div
*Maximum input voltage: 50 Vpk (1X probe)
*Input impedance: 1M ohm / 20pF
*Accuracy: 12 digits
*Record length: 1024 points
*Coupling mode: DC / AC / GND
*Time base range: 500s/Div - 10us / Div
*Trigger mode: automatic, normal, one shot
*Trigger position: buffer center
*Power supply voltage: DC 9v (8 - 10v)
*Current consumption: ~ 120ma @ 9v
*Motherboard size: 94 x 65 mm / 3.7 x 2.56 inches(Approx.)
*Analog board size: 65 x 47 mm / 2.56 x 1.85 inches(Approx.)
*Screen size: 52 x 40 mm / 2 x 1.57 inches(Approx.)
Package Contents:
1*Oscilloscope
1*Probe
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Product description:
FNIRSI DSO188 is an ultra-small digital oscilloscope with a sampling rate of 5MS/s and a bandwidth of 1MHz. It is designed for electronics enthusiasts and circuit development and maintenance personnel. 1MHz bandwidth can be used for amplifiers, oscillators, automatic control systems, DC/DC, inverters, switching power supplies, etc. Whether it is DIY or scientific research education, car repair, household appliance repair, etc. are good choices.
Memory compression technology, the waveform refresh screen does not flicker
1.8 inch color display
1MHz analog bandwidth and 5MS/s sampling rate
High measuring voltage range, 1X can measure 0~40V, 10X can measure 40~800V
Can display frequency, Vmax, Vmin, duty cycle, Vrms, Vpp
Freeze waveform display at any time (pause function)
Battery/USB power supply, built-in 250mAh battery and smart charging management
Ultra small size, easy to carry
Product Specifications:
Analog bandwidth: 1MHz
Maximum real-time sampling rate: 5MS/s
Vertical sensitivity: 50 mV / div~200 V / div
Horizontal time base range: 100mS/div~2uS/div
Maximum input voltage: 40 V (1X probe), 800 V (10X probe)
Storage depth: 40KB
Input resistance: 1M
ADC accuracy: 12bits
Coupling mode: AC / DC
Trigger mode: automatic
Trigger edge: rising/falling edge
External trigger voltage 0 – 40 V
Display: TFT color display
Power supply: 250 mAh lithium battery
Dimensions: 57 x 34 x 11mm
Weight: 40 grams
Package includes:
1 FNIRSI DSO188 oscilloscope host
1 oscilloscope probe
1 x BNC to MCX switch head
1 Micro USB data cable
1 x User Manual (English)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

DSO188 1.8 In TFT LCD Display Digital Oscilloscope Probe 1MHz Bandwidth 5MS/S
Product description:
FNIRSI DSO188 is an ultra-small digital oscilloscope with a sampling rate of 5MS/s and a bandwidth of 1MHz. It is designed for electronics enthusiasts and circuit development and maintenance personnel. 1MHz bandwidth can be used for amplifiers, oscillators, automatic control systems, DC/DC, inverters, switching power supplies, etc. Whether it is DIY or scientific research education, car repair, household appliance repair, etc. are good choices.
Memory compression technology, the waveform refresh screen does not flicker
1.8 inch color display
1MHz analog bandwidth and 5MS/s sampling rate
High measuring voltage range, 1X can measure 0~40V, 10X can measure 40~800V
Can display frequency, Vmax, Vmin, duty cycle, Vrms, Vpp
Freeze waveform display at any time (pause function)
Battery/USB power supply, built-in 250mAh battery and smart charging management
Ultra small size, easy to carry
Product Specifications:
Analog bandwidth: 1MHz
Maximum real-time sampling rate: 5MS/s
Vertical sensitivity: 50 mV / div~200 V / div
Horizontal time base range: 100mS/div~2uS/div
Maximum input voltage: 40 V (1X probe), 800 V (10X probe)
Storage depth: 40KB
Input resistance: 1M
ADC accuracy: 12bits
Coupling mode: AC / DC
Trigger mode: automatic
Trigger edge: rising/falling edge
External trigger voltage 0 – 40 V
Display: TFT color display
Power supply: 250 mAh lithium battery
Dimensions: 57 x 34 x 11mm
Weight: 40 grams
Package includes:
1 FNIRSI DSO188 oscilloscope host
1 oscilloscope probe
1 x BNC to MCX switch head
1 Micro USB data cable
1 x User Manual (English)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

DSO188 Handheld Ultra-small 1.8 Digital Storage Oscilloscope 1MHz Bandwidth 5M
Product description:
FNIRSI DSO188 is an ultra-small digital oscilloscope with a sampling rate of 5MS/s and a bandwidth of 1MHz. It is designed for electronics enthusiasts and circuit development and maintenance personnel. 1MHz bandwidth can be used for amplifiers, oscillators, automatic control systems, DC/DC, inverters, switching power supplies, etc. Whether it is DIY or scientific research education, car repair, household appliance repair, etc. are good choices.
Memory compression technology, the waveform refresh screen does not flicker
1.8 inch color display
1MHz analog bandwidth and 5MS/s sampling rate
High measuring voltage range, 1X can measure 0~40V, 10X can measure 40~800V
Can display frequency, Vmax, Vmin, duty cycle, Vrms, Vpp
Freeze waveform display at any time (pause function)
Battery/USB power supply, built-in 250mAh battery and smart charging management
Ultra small size, easy to carry
Product Specifications:
Analog bandwidth: 1MHz
Maximum real-time sampling rate: 5MS/s
Vertical sensitivity: 50 mV / div~200 V / div
Horizontal time base range: 100mS/div~2uS/div
Maximum input voltage: 40 V (1X probe), 800 V (10X probe)
Storage depth: 40KB
Input resistance: 1M
ADC accuracy: 12bits
Coupling mode: AC / DC
Trigger mode: automatic
Trigger edge: rising/falling edge
External trigger voltage 0 – 40 V
Display: TFT color display
Power supply: 250 mAh lithium battery
Dimensions: 57 x 34 x 11mm
Weight: 40 grams
Package includes:
1 FNIRSI DSO188 oscilloscope host
1 oscilloscope probe
1 x BNC to MCX switch head
1 Micro USB data cable
1 x User Manual (English)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Product description:
FNIRSI DSO188 is an ultra-small digital oscilloscope with a sampling rate of 5MS/s and a bandwidth of 1MHz. It is designed for electronics enthusiasts and circuit development and maintenance personnel. 1MHz bandwidth can be used for amplifiers, oscillators, automatic control systems, DC/DC, inverters, switching power supplies, etc. Whether it is DIY or scientific research education, car repair, household appliance repair, etc. are good choices.
Memory compression technology, the waveform refresh screen does not flicker
1.8 inch color display
1MHz analog bandwidth and 5MS/s sampling rate
High measuring voltage range, 1X can measure 0~40V, 10X can measure 40~800V
Can display frequency, Vmax, Vmin, duty cycle, Vrms, Vpp
Freeze waveform display at any time (pause function)
Battery/USB power supply, built-in 250mAh battery and smart charging management
Ultra small size, easy to carry
Product Specifications:
Analog bandwidth: 1MHz
Maximum real-time sampling rate: 5MS/s
Vertical sensitivity: 50 mV / div~200 V / div
Horizontal time base range: 100mS/div~2uS/div
Maximum input voltage: 40 V (1X probe), 800 V (10X probe)
Storage depth: 40KB
Input resistance: 1M
ADC accuracy: 12bits
Coupling mode: AC / DC
Trigger mode: automatic
Trigger edge: rising/falling edge
External trigger voltage 0 – 40 V
Display: TFT color display
Power supply: 250 mAh lithium battery
Dimensions: 57 x 34 x 11mm
Weight: 40 grams
Package includes:
1 FNIRSI DSO188 oscilloscope host
1 oscilloscope probe
1 x BNC to MCX switch head
1 Micro USB data cable
1 x User Manual (English)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

20 Segment Analyzer Level Display Indicator Music Spectrum 30-20khz 12V
Item Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Stereo VU meter indicator music spectrum analyzer 20-segment LED level display
* Input Voltage: USB 5V or 12V
* Display Characteristics: 20 Segments, 10 Levels
* Frequency Response: 30-20khz
* Dimensions: 200 * 26 * 25mm(Approx.)
Package Contents:
1 * LED Music Spectrum Display Module
1 * Audio Cable
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Analysis Module Domain Tool 92 * 48mm Spectrum Signal Analyzer Durable
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
Specifications:
Material: PCB
Color: green
Property: RF frequency domain analysis tool
Interface: USB
Power: USB
Standby current: ≤100mA
Scanning current: ≤350mA
Scan bandwidth: 33mHz-4400mHz
Turn on the tracking generator output bandwidth 33mHz-3000mHz
Scan step length: ≥33~68.75mHz/125Hz, 68.75~137.5mHz/250Hz, 137.5~275mHz/500Hz, 275~550mHz/1kHz, 550~1100mHz/2kHz, 1100~2200mHz/4kHz, 2200~4400mHz/8kHz
Scanning speed: ≥800 points/sec
Scanning dynamic logarithmic ratio:> 50dB
Point frequency or sweep output power: ≈0dBm
Input detection: ≤10dbm
Background: ≈-60dBm
Software used on the computer: NWT4.11.09 version
Computer operating system: winxp, win7, win10
Product size: 92 * 48mm / 3.6 * 1.9in
Package Contents:
1 * Spectrum Analyzer
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

RF Spectrum Signal Analyzer W/ Tracking Source Module,Analysis Domain Tool USB.
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
Specifications:
Material: PCB
Color: green
Property: RF frequency domain analysis tool
Interface: USB
Power: USB
Standby current: ≤100mA
Scanning current: ≤350mA
Scan bandwidth: 33mHz-4400mHz
Turn on the tracking generator output bandwidth 33mHz-3000mHz
Scan step length: ≥33~68.75mHz/125Hz, 68.75~137.5mHz/250Hz, 137.5~275mHz/500Hz, 275~550mHz/1kHz, 550~1100mHz/2kHz, 1100~2200mHz/4kHz, 2200~4400mHz/8kHz
Scanning speed: ≥800 points/sec
Scanning dynamic logarithmic ratio:> 50dB
Point frequency or sweep output power: ≈0dBm
Input detection: ≤10dbm
Background: ≈-60dBm
Software used on the computer: NWT4.11.09 version
Computer operating system: winxp, win7, win10
Product size: 92 * 48mm / 3.6 * 1.9in
Package Contents:
1 * Spectrum Analyzer
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Measurement Vector analyzer Kit 2.8 inch LCD Equipment Tools HF VHF UHF UV
Item Details:
*100% Brand new and high quality
*Made of high quality materials, durable and practical.
*Simple and practical PC control software, you can export Pietra di Paragone (snp) files through PC software for various radio design and simulation software
*The best frequency algorithm can use the si5351 odd-numbered extended harmonics to support measurement frequencies up to 900 MHz. The metal shield is designed to reduce external interference and improve measurement accuracy
*Si5351 direct output 50535-300 MHz frequency range provides better dynamic 70dB. Extended 300 M-600 MHz band provides better than 60dB dynamic, while 600 M-900 M band provides better than 50dB dynamic .
*This is a DIY product that provides perfect vector network measurement capabilities as credit card size
*It includes a 2.8-inch touch screen and a 450 mAh battery that can be used online for 2 hours
*To make more measurements, please connect to an external power source or contact me to make a larger battery version
*TX / RX method can measure the complete S11 and S21 parameters. If you need to get S12 and S22, you need to manually change the harness transceiver
Specification:
*Frequency measurement: 50 KHz ~ 300 MHz (50 KHz-900 MHz, allowing extended firmware)
*RF output power: -13dbm (maximum) -9dbm)
*Measurement range: 70dB (50 kHz-300 MHz), 60dB (300 M-600 MHz), 50dB (600 M-900 MHz) allows extended firmware)
*SWR port: <1.1
*Display: 2.8 inch TFT (320x240)
*USB interface: USB C type communication mode: CDC (standard)
*Power: USB 5V 120mA, built-in 450 mAh battery, maximum charging current 0.8A
*Scan points: 101 (fixed)
*Colour: Black(As Pictures Show)
*PCB: 54mm x 85.5mm x 11mm (without connector and switch)
Package Contents:
1*Host (with 450 mAh battery)
1* USB Type-C Data Cable
2*30 mm SMA Male to RG174 Male RF Cable
1* SMA Simple Calibration Kit
1* SMA Female to Female Connector
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

High Quality Tester DIY Vector Network Analyzer Replacement Accessory Nano Kit
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Name: DIY Vector Network Analyzer
*PCB: 54mm x 85.5mm x 11mm (without connector, switch size)
*Measurement frequency: 50KHz~300MHz (50KHz -900MHz, enable extended firmware)
*RF output: -13dbm (maximum -9dbm)
*Frequency accuracy: <0.5ppm
*Measurement range: 70dB (50kHz-300MHz), 50dB (300M-600MHz), 40dB (600M-900MHz), can be extended firmware)
*Port SWR: <1.1
*Display: 2.8-inch TFT (320 x 240)
*USB interface: USB Type-C; communication mode: CDC (serial port)
*Power: USB 5V 120mA, built-in 400mAh, maximum charging current 0.8A
*Calibration Points: 101 (fixed)
*Scan Points: 101 (fixed)
*Display Tracking: 4, mark: 4, save settings: 5
*Measure S parameters, voltage standing wave ratio, phase, delay, Smith chart, etc.
*Language: English and Chinese
Package Contents:
1*Nano VNA Host
1*USB Type-C Data Cable
2*30cm SMA Male To Male RG174 RF Cables
1*SMA Calibration Kit Male
1*SMA Female To Female Connector
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Vector Network Analyzer Nano VNA Kit HF VHF UHF White 50KHz-900MHz Durable
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*NanoVNA is a very compact handheld vector network analyzer (VNA). It is a stand-alone, portable device with an LCD display and a battery. The project is designed to provide RF gadgets for enthusiasts, but it is a useful tool.
*2019-10-25 TFT LCD touch screen display.
*Built-in lithium battery power supply, more convenient to use.
*Measurement frequency range is 50KHz~300MHz (50KHz~900MHz, enable extended firmware).
*Basic operation: set the frequency range, calibration, select the display format and channel, save.
*You can change the display format and channel selection at any time.
*In normal test mode, tap the right area of the screen or press the dial switch to bring up the menu.
*Tap the screen or turn the wheel switch to select a menu item.
*Portable and compact, easy to operate and carry.
Specification:
*Main Material: PCB
*Color: White (As pictures show)
*Display: 2.8-inch TFT (320 * 240)
*Measurement Frequency: 50KHz~300MHz (50KHz~900MHz, enable extended firmware)
*RF Output: -13dbm (Maximum -9dbm)
*Measurement Range: 70dB (50KHz~300MHz), 40dB (300M-900MHz, enable extended firmware)
*SWR port: <1.1
*USB Interface: USB C Type Communication Method: CDC (Serial)
*Power: USB 5V 120mA
*Battery: 1 * Built-In Lithium Battery, 400mAh (Included)
*Scan Points: 101 (Fixed)
*Display Tracking: 4, Mark: 4, Settings Save: 5
*PCB Size: 68 * 50 * 10mm / 2.7 * 2.0 * 0.4in (Not * With Connector, Lever Switch)
*Size: 85.5 * 54 * 11mm / 3.4 * 2.1 * 0.4in(Approx.)
Package Contents:
1*NanoVNA
2*30mm SMA Male to Male RG174 RF Cables
1*SMA Female to Female Connector
1*USB Cable (Type C)
1*SMA Simple Calibration Kit (Short/Open/Load)
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

2.4" DSO FNIRSI PRO Handheld Digital Oscilloscope Crocodile Clip Probe Durable
Features:
* 100% brand new and high quality
* Memory compression technology, waveform refresh screen does not flicker
* Afterglow display technology
* 2.4 inch color display screen
* 5MHz analog bandwidth @ 20MS/s sampling rate
* Fast waveform storage
* Built-in 16M storage space, the maximum storage of 500 waveform pictures
* Powerful waveform file manager, support thumbnail browsing, viewing, details view, flip, delete and other functions
* High measurement voltage range, 1X can measure 0 ~ 40 V, 10X can measure 40 ~ 800V
* Up to 11 parameters measurement:VPP,Vmax,Vmin,Vavg,Vrms,Frequent,Duty ,Duty-,Time ,Time-,Time
* At any time, the waveform display (pause function) is frozen
* Equipped with high efficiency one button AUTO
* Complete triggering function (single, normal, automatic)
* Built in 1200mAh rechargeable lithium battery can be continuously charged for 3 hours at one time
* Day mode and night mode
* Ultra small volume, easy to carry
Specifications:
* Analog band width: 5MHz
* Maximum real time sampling rate: 20MS/s
* Vertical sensitivity: 50mV/div ~ 200 V/div
* Horizontal time base range: 50S/div ~ 250nS/div
* Maximum input voltage: 40 V (1X probe), 800 V (10X probe)
* Storage depth: 40KB
* Input resistance: 1M
* ADC precision: 8bits
* Coupling mode: AC/DC
* Trigger mode: Single, Normal, Automatic
* Trigger edge: Ascending/descending edge
* External trigger voltage: 0 ~ 40 V
* Display: 2.4 inch @ 320 * 240
* Power supply: 1200mAh lithium battery
* Size: 107 * 70 * 24mm (Approx.)
Package Contents:
1 * DSO FNIRSI PRO Oscilloscope Host
1 * Crocodile Clip Probe
1 * Micro USB Data Line
1 * User manual (English)
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

20MSps Oscilloscope 5MHz Bandwidth Equipment Set DSO Handheld Industrial
Features:
* 100% brand new and high quality
* Memory compression technology, waveform refresh screen does not flicker
* Afterglow display technology
* 2.4 inch color display screen
* 5MHz analog bandwidth @ 20MS/s sampling rate
* Fast waveform storage
* Built-in 16M storage space, the maximum storage of 500 waveform pictures
* Powerful waveform file manager, support thumbnail browsing, viewing, details view, flip, delete and other functions
* High measurement voltage range, 1X can measure 0 ~ 40 V, 10X can measure 40 ~ 800V
* Up to 11 parameters measurement:VPP,Vmax,Vmin,Vavg,Vrms,Frequent,Duty ,Duty-,Time ,Time-,Time
* At any time, the waveform display (pause function) is frozen
* Equipped with high efficiency one button AUTO
* Complete triggering function (single, normal, automatic)
* Built in 1200mAh rechargeable lithium battery can be continuously charged for 3 hours at one time
* Day mode and night mode
* Ultra small volume, easy to carry
Specifications:
* Analog band width: 5MHz
* Maximum real time sampling rate: 20MS/s
* Vertical sensitivity: 50mV/div ~ 200 V/div
* Horizontal time base range: 50S/div ~ 250nS/div
* Maximum input voltage: 40 V (1X probe), 800 V (10X probe)
* Storage depth: 40KB
* Input resistance: 1M
* ADC precision: 8bits
* Coupling mode: AC/DC
* Trigger mode: Single, Normal, Automatic
* Trigger edge: Ascending/descending edge
* External trigger voltage: 0 ~ 40 V
* Display: 2.4 inch @ 320 * 240
* Power supply: 1200mAh lithium battery
* Size: 107 * 70 * 24mm (Approx.)
Package Contents:
1 * DSO FNIRSI PRO Oscilloscope Host
1 * Crocodile Clip Probe
1 * Micro USB Data Line
1 * User manual (English)
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Oscilloscope Probe Equipment 5MHz Bandwidth Test cip DSO Handheld Mini
Features:
* 100% brand new and high quality
* Memory compression technology, waveform refresh screen does not flicker
* Afterglow display technology
* 2.4 inch color display screen
* 5MHz analog bandwidth @ 20MS/s sampling rate
* Fast waveform storage
* Built-in 16M storage space, the maximum storage of 500 waveform pictures
* Powerful waveform file manager, support thumbnail browsing, viewing, details view, flip, delete and other functions
* High measurement voltage range, 1X can measure 0 ~ 40 V, 10X can measure 40 ~ 800V
* Up to 11 parameters measurement:VPP,Vmax,Vmin,Vavg,Vrms,Frequent,Duty ,Duty-,Time ,Time-,Time
* At any time, the waveform display (pause function) is frozen
* Equipped with high efficiency one button AUTO
* Complete triggering function (single, normal, automatic)
* Built in 1200mAh rechargeable lithium battery can be continuously charged for 3 hours at one time
* Day mode and night mode
* Ultra small volume, easy to carry
Specifications:
* Analog band width: 5MHz
* Maximum real time sampling rate: 20MS/s
* Vertical sensitivity: 50mV/div ~ 200 V/div
* Horizontal time base range: 50S/div ~ 250nS/div
* Maximum input voltage: 40 V (1X probe), 800 V (10X probe)
* Storage depth: 40KB
* Input resistance: 1M
* ADC precision: 8bits
* Coupling mode: AC/DC
* Trigger mode: Single, Normal, Automatic
* Trigger edge: Ascending/descending edge
* External trigger voltage: 0 ~ 40 V
* Display: 2.4 inch @ 320 * 240
* Power supply: 1200mAh lithium battery
* Size: 107 * 70 * 24mm (Approx.)
Package Contents:
1 * DSO FNIRSI PRO Oscilloscope Host
1 * Crocodile Clip Probe
1 * Micro USB Data Line
1 * User manual (English)
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Tool Oscilloscope Equipment 5MHz Bandwidth Set DSO Handheld Electronics
Features:
* 100% brand new and high quality
* Memory compression technology, waveform refresh screen does not flicker
* Afterglow display technology
* 2.4 inch color display screen
* 5MHz analog bandwidth @ 20MS/s sampling rate
* Fast waveform storage
* Built-in 16M storage space, the maximum storage of 500 waveform pictures
* Powerful waveform file manager, support thumbnail browsing, viewing, details view, flip, delete and other functions
* High measurement voltage range, 1X can measure 0 ~ 40 V, 10X can measure 40 ~ 800V
* Up to 11 parameters measurement:VPP,Vmax,Vmin,Vavg,Vrms,Frequent,Duty ,Duty-,Time ,Time-,Time
* At any time, the waveform display (pause function) is frozen
* Equipped with high efficiency one button AUTO
* Complete triggering function (single, normal, automatic)
* Built in 1200mAh rechargeable lithium battery can be continuously charged for 3 hours at one time
* Day mode and night mode
* Ultra small volume, easy to carry
Specifications:
* Analog band width: 5MHz
* Maximum real time sampling rate: 20MS/s
* Vertical sensitivity: 50mV/div ~ 200 V/div
* Horizontal time base range: 50S/div ~ 250nS/div
* Maximum input voltage: 40 V (1X probe), 800 V (10X probe)
* Storage depth: 40KB
* Input resistance: 1M
* ADC precision: 8bits
* Coupling mode: AC/DC
* Trigger mode: Single, Normal, Automatic
* Trigger edge: Ascending/descending edge
* External trigger voltage: 0 ~ 40 V
* Display: 2.4 inch @ 320 * 240
* Power supply: 1200mAh lithium battery
* Size: 107 * 70 * 24mm (Approx.)
Package Contents:
1 * DSO FNIRSI PRO Oscilloscope Host
1 * Crocodile Clip Probe
1 * Micro USB Data Line
1 * User manual (English)
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Item Details:
- 100% brand new and high quality
- Made of high quality material, durable and practical to use
- Support 8 kinds of display effects (switch by button), support time display, temperature/humidity detection.
- Supply voltage: 5V / 1A
- Audio input: <2V
- Optional Color: Blue, Green, White(As pictures show)
- Spectrum range: full audio range (20HZ~20KHZ)
OLED screen advantages:
- Low power consumption and high brightness;
- Active light, visible in the sun;
- Compared with ordinary LCD screens, OLEDs respond faster;
- High and low temperature resistance, more suitable for the car;
- OLED is more resistant to vibration than VFD (vacuum screen);
No music input Automatically switch to time display function.
Built-in high-sensitivity microphone, no longer worry about wiring;
Audio line input is also supported, and audio line input is recommended for more accurate spectrum effects.
Package Contents:
1 x Spectrum Display
1 x AUX Headphone Cable (Double Male)
1 x USB Power Cord
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Analyzer Antenna Analyzer S-A-A-2 50kHz-3GHz For Windows Hot Practical
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
S-A-A-2 NanoVNA V2 3GHz vector network analyzer is a vector network analyzer with higher measurement frequency developed and produced according to LGPL license agreement and based on the design of OwOComm.
SAA-2 / NanoVNA V2 uses a similar user interface to NanoVNA, but adopts a different technical architecture. SAA-2 / NanoVNA V2 does not load the initial calibration data at startup and does not automatically insert calibration data after the user changes the frequency. After the second start and frequency change, the calibration data must be recalibrated or recalled.
Specifications:
Frequency Range: 50kHz-3GHz
System Dynamic Range (Calibration): 70dB (up to 1.5GHz), 60dB (up to 3GHz)
S11 Noise Floor (Calibration): -50dB (up to 1.5GHz), -40dB (up to 3GHz)
Scanning Speed: 100 Points / Second
Display: 2.8 Inches, 320 x 240
USB Interface: Micro USB
Power Supply: USB, Maximum Charging Current 1A
Battery: 2000mAh Lithium Ion
Battery Connector: JST-XH 2.54mm
Maximum Scan Point (On Device Screen): 201
Maximum Scan Point (USB): 1024
Port 2 Return Loss (1.5GHz): 20dB Typ
Port 2 Return Loss (3GHz): 13dB MIN
VNA-QT Software Compatible System: For Linux, For Windows (7 ), For Mac OS planned
Package Contents:
1*S-A-A-2 Host (Built-In 2000mAh Battery)
1*USB Data Cable
2*30cm SMA Male to Male SS405 RF Cable
1*SMA Simple Calibration Set OPEN
1*SMA Simple Calibration Set SHORT
1*SMA Simple Calibration Set LOAD
1*SMA Female to Female Connector
1 Set of DIY Accessories
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Antenna Analyzer Analyzer NanoVNA V2 For Windows Accessory Hot Practical
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
S-A-A-2 NanoVNA V2 3GHz vector network analyzer is a vector network analyzer with higher measurement frequency developed and produced according to LGPL license agreement and based on the design of OwOComm.
SAA-2 / NanoVNA V2 uses a similar user interface to NanoVNA, but adopts a different technical architecture. SAA-2 / NanoVNA V2 does not load the initial calibration data at startup and does not automatically insert calibration data after the user changes the frequency. After the second start and frequency change, the calibration data must be recalibrated or recalled.
Specifications:
Frequency Range: 50kHz-3GHz
System Dynamic Range (Calibration): 70dB (up to 1.5GHz), 60dB (up to 3GHz)
S11 Noise Floor (Calibration): -50dB (up to 1.5GHz), -40dB (up to 3GHz)
Scanning Speed: 100 Points / Second
Display: 2.8 Inches, 320 x 240
USB Interface: Micro USB
Power Supply: USB, Maximum Charging Current 1A
Battery: 2000mAh Lithium Ion
Battery Connector: JST-XH 2.54mm
Maximum Scan Point (On Device Screen): 201
Maximum Scan Point (USB): 1024
Port 2 Return Loss (1.5GHz): 20dB Typ
Port 2 Return Loss (3GHz): 13dB MIN
VNA-QT Software Compatible System: For Linux, For Windows (7 ), For Mac OS planned
Package Contents:
1*S-A-A-2 Host (Built-In 2000mAh Battery)
1*USB Data Cable
2*30cm SMA Male to Male SS405 RF Cable
1*SMA Simple Calibration Set OPEN
1*SMA Simple Calibration Set SHORT
1*SMA Simple Calibration Set LOAD
1*SMA Female to Female Connector
1 Set of DIY Accessories
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Features:
100% brand new and high quality
Made of high-quality materials, durable
The 4-inch full-view LCD screen has added DC dimming function, which can be seen more clearly when used outdoors and more comfortable to use indoors
Optimize the bridge to make full use of the Si5351's harmonics. Now you can use the 5th harmonic to measure to 1.5GHz
When using fundamental wave, CH0 output level is increased to 0dBm, reflection measurement is more accurate
Solve the abnormal NanoVNA-H before 6MHz
Reproduce the designed power management circuit, further reduce power noise, reduce USB power interference, reduce charging current, and protect the battery
Optimized PCB layout, can accommodate 1950mAh battery, use time more than 8 hours
Reserved UART interface, convenient for DIY expansion
Open the mold to make a new ABS shell, which is light and convenient to protect the machine
Product parameters:
ABS shell: 75mm x 133mm x 18mm (excluding protrusions)
Measuring frequency: 50KHz~1.5GHz
RF output: 0dbm (±2dB, fundamental wave)
Frequency accuracy: <2ppm
Frequency stability: <0.5ppm
Measurement range: 70dB (50kHz-300 MHz), (60dB (300M-900MHz), 40dB (0.9G-1.5GHz) enable extended firmware)
(Note: When using harmonic measurement, please pay attention to the error caused by the nonlinear transformation of the fundamental wave.)
Port SWR: <1.1
Display: 4 inch TFT (320 x 480)
USB interface: USB type-C; communication mode: CDC (serial)
Power supply: USB 5V 200mA. Maximum charging current 1A
Number of calibration points: 101 (fixed)
Scanning points: 101 (fixed)
Display trace: 4, mark: 4, save setting: 5
Measure S parameters, voltage standing wave ratio, phase, delay, Smith chart, time domain analysis, etc.
Package includes:
1 *NanoVNA-H4 (including 4-inch touch screen, 1950mAh battery)
2 *15cm SMA male to male RG316 RF cable
1 *SMA female to female connector
1 *SMA simple calibration kit is short
1 *SMA simple calibration kit OPEN
1 *SMA simple calibration kit LOAD
1 *USB Type-C data cable
1 *Type C to Type C (supports connection with most Android phones)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
*100% brand new high quality
*Made of high-quality materials, durable
*According to the LGPL license agreement, based on the design of OwOComm, SAA2 is a portable 3GHz vector network analyzer.
*It uses a user interface similar to NanoVNA, but uses a different technical architecture.
*It will not load the initial calibration data at startup, and will not automatically insert the calibration data after the user changes the frequency.
*After each startup and frequency change, you must recalibrate or recall the calibration data. Please read the instruction manual carefully before use to avoid damage to the equipment.
Specification:
*Frequency range: 50kHz-3GHz
*System dynamic range (correction): 70dB (up to 1.5GHz), 60dB (up to 3GHz)
*S11 noise level (correction): -50dB (up to 1.5GHz), -40dB (up to 3GHz)
*Scan speed: 100 points/sec
*Display: 2.8 inches, 320 x 240
*USB interface: Micro USB
*Power supply: USB, maximum charging current 1A
*Power connector: JST-XH 2.54mm
*Maximum scan point (on the device screen): 201
*Maximum scan point (USB): 1024
*Port 2 return loss (1.5GHz): 20dB typical
*Port 2 return loss (3GHz): minimum 13dB
*VNA-QT software compatible system: For Linux, For Windows (7 ), For Mac OS has been planned
Package Contents:
1 *S-A-A-2 host (built-in 1950mAh battery)
1 *USB data cable
2 *30cm SMA male to male SS405 RF cable
1 *SMA simple calibration kit OPEN
1 *SMA simple calibration kit SHORT
1 *SMA simple calibration kit LOAD
1 *SMA female to female connector
1 *EVA partial carrying bag
1 *Touch pen
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
*100% brand new high quality
*Made of high-quality materials, durable
*According to the LGPL license agreement, based on the design of OwOComm, SAA2 is a portable 3GHz vector network analyzer.
*It uses a user interface similar to NanoVNA, but uses a different technical architecture.
*It will not load the initial calibration data at startup, and will not automatically insert the calibration data after the user changes the frequency.
*After each startup and frequency change, you must recalibrate or recall the calibration data. Please read the instruction manual carefully before use to avoid damage to the equipment.
Specification:
*Frequency range: 50kHz-3GHz
*System dynamic range (correction): 70dB (up to 1.5GHz), 60dB (up to 3GHz)
*S11 noise level (correction): -50dB (up to 1.5GHz), -40dB (up to 3GHz)
*Scan speed: 100 points/sec
*Display: 2.8 inches, 320 x 240
*USB interface: Micro USB
*Power supply: USB, maximum charging current 1A
*Power connector: JST-XH 2.54mm
*Maximum scan point (on the device screen): 201
*Maximum scan point (USB): 1024
*Port 2 return loss (1.5GHz): 20dB typical
*Port 2 return loss (3GHz): minimum 13dB
*VNA-QT software compatible system: For Linux, For Windows (7 ), For Mac OS has been planned
Package Contents:
1 *S-A-A-2 host (built-in 1950mAh battery)
1 *USB data cable
2 *30cm SMA male to male SS405 RF cable
1 *SMA simple calibration kit OPEN
1 *SMA simple calibration kit SHORT
1 *SMA simple calibration kit LOAD
1 *SMA female to female connector
1 *EVA partial carrying bag
1 *Touch pen
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Vector Analyzer HF Network Antenna Analyzer Durable Practical Brand new
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
According to the license agreement for LGPL, based on the design for OwOComm, SAA2 is a portable 3GHz vector network analyzer.
It uses a user interface similar to NanoVNA, but uses a different technical architecture. It does not load initial calibration data at startup and does not automatically insert calibration data after users change frequency. Calibration data must be recalibrated or recalled after each startup and frequency change. Please read instruction manual carefully before use to avoid damage to the device.
Specifications:
Frequency Range: 50kHz-3GHz
System Dynamic Range (Calibration): 70dB (up to 1.5GHz), 60dB (up to 3GHz)
S11 Noise Level (Calibration): -50dB (up to 1.5GHz), -40dB (up to 3GHz)
Scanning Speed: 100 Points/Second
Display: 2.8 Inches, 320 x 240
USB Interface: Micro USB
Power Supply: USB, Maximum Charging Current 1A
Power Supply Connector: JST-XH 2.54mm
Maximum Scan Point (On Device Screen): 201
Maximum Scan Point (USB): 1024
Port 2 Return Loss (1.5GHz): 20dB typ
Port 2 return Loss (3GHz): 13dB MIN
VNA-QT software Compatible System: For Linux, For Windows (7 ), For Mac OS planned
Package Contents:
1 x S-A-A-2 Host
1 x Micro USB Data Cable
2 x 30cm SMA Male to Male SS405 Cables
1 x SMA Simple Calibration Kit OPEN
1 x SMA Simple Calibration Kit SHORT
1 x SMA Simple Calibration Kit LOAD
1 x SMA Female to Female Connector
1 x EVA Storage Bag
1 x Pick
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Analyzer UHF 50kHz-3GHz Vector Network Antenna Analyzer Durable Brand new
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
According to the license agreement for LGPL, based on the design for OwOComm, SAA2 is a portable 3GHz vector network analyzer.
It uses a user interface similar to NanoVNA, but uses a different technical architecture. It does not load initial calibration data at startup and does not automatically insert calibration data after users change frequency. Calibration data must be recalibrated or recalled after each startup and frequency change. Please read instruction manual carefully before use to avoid damage to the device.
Specifications:
Frequency Range: 50kHz-3GHz
System Dynamic Range (Calibration): 70dB (up to 1.5GHz), 60dB (up to 3GHz)
S11 Noise Level (Calibration): -50dB (up to 1.5GHz), -40dB (up to 3GHz)
Scanning Speed: 100 Points/Second
Display: 2.8 Inches, 320 x 240
USB Interface: Micro USB
Power Supply: USB, Maximum Charging Current 1A
Power Supply Connector: JST-XH 2.54mm
Maximum Scan Point (On Device Screen): 201
Maximum Scan Point (USB): 1024
Port 2 Return Loss (1.5GHz): 20dB typ
Port 2 return Loss (3GHz): 13dB MIN
VNA-QT software Compatible System: For Linux, For Windows (7 ), For Mac OS planned
Package Contents:
1 x S-A-A-2 Host
1 x Micro USB Data Cable
2 x 30cm SMA Male to Male SS405 Cables
1 x SMA Simple Calibration Kit OPEN
1 x SMA Simple Calibration Kit SHORT
1 x SMA Simple Calibration Kit LOAD
1 x SMA Female to Female Connector
1 x EVA Storage Bag
1 x Pick
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

FNIRSI 1C15 Portable 2.4-inch Digital Oscilloscope 500MS/s 110MHz Square Wave
Features:
100% brand new and high quality
FNIRSI-1C15 is a fully functional, practical and cost-effective handheld oscilloscope newly launched by FNIRSI.
The real-time sampling rate is 500M, and the analog bandwidth is 110MHz.
In addition to all the functions of a conventional handheld oscilloscope, we also added a one-key quick automatic function on this basis, so you can easily master the waveform like a desktop computer.
We added a 1k Hz self-checking square wave to FNIRSI-1C15, and the storage depth has been upgraded to 12kpts.
With reference to the waveform, you can pause at any time to save the previous frame waveform to the screen, and you can compare it with the currently refreshed waveform. The persistence and scroll mode make it easier to detect and record the waveform.
Built-in 3000mAH rechargeable battery, it can work continuously for more than 10 hours after fully charged.
The body is equipped with a high-quality silicone sleeve, which is non-slip and anti-drop.
The joystick replaces the original arrow keys, making the operation simpler and more effective.
Product parameters:
Model: FNIRSI-1C15
Number of channels: 1
Screen size: 2.4 inches
Screen resolution: 320 * 240
Analog bandwidth: 110M
Sampling rate: 500M
1k Hz self-check square wave: standby
Rise time: <3ns
Storage depth: 12 Kpts
Time base range: 5ns-10s
Vertical sensitivity: 20mv/div-100v/div
Trigger mode: automatic/normal
Trigger type: up/down
Display mode: YT/Scroll
Afterglow time: None/1s/∞
Charging method: 5V / 800mA
Voltage measurement range: ±40v (x1 file); ±400v (x10 file)
Channel coupling: AC-DC
One key automatic: standby
Waveform measurement: 14 types
Measurement accuracy: ±2%
Reference waveform: standby
Waveform save: standby
Frequency accuracy: ±0.01%
Packing list:
1 *Oscilloscope
1 *High voltage probe
1 *Alligator clip probe
1 *Data cable
1 *User Manual
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

FNIRSI 1C15 Portable 2.4 Digital Oscilloscope 500MS/s 110MHz Waveform Storage
Features:
100% brand new and high quality
FNIRSI-1C15 is a fully functional, practical and cost-effective handheld oscilloscope newly launched by FNIRSI.
The real-time sampling rate is 500M, and the analog bandwidth is 110MHz.
In addition to all the functions of a conventional handheld oscilloscope, we also added a one-key quick automatic function on this basis, so you can easily master the waveform like a desktop computer.
We added a 1k Hz self-checking square wave to FNIRSI-1C15, and the storage depth has been upgraded to 12kpts.
With reference to the waveform, you can pause at any time to save the previous frame waveform to the screen, and you can compare it with the currently refreshed waveform. The persistence and scroll mode make it easier to detect and record the waveform.
Built-in 3000mAH rechargeable battery, it can work continuously for more than 10 hours after fully charged.
The body is equipped with a high-quality silicone sleeve, which is non-slip and anti-drop.
The joystick replaces the original arrow keys, making the operation simpler and more effective.
Product parameters:
Model: FNIRSI-1C15
Number of channels: 1
Screen size: 2.4 inches
Screen resolution: 320 * 240
Analog bandwidth: 110M
Sampling rate: 500M
1k Hz self-check square wave: standby
Rise time: <3ns
Storage depth: 12 Kpts
Time base range: 5ns-10s
Vertical sensitivity: 20mv/div-100v/div
Trigger mode: automatic/normal
Trigger type: up/down
Display mode: YT/Scroll
Afterglow time: None/1s/∞
Charging method: 5V / 800mA
Voltage measurement range: ±40v (x1 file); ±400v (x10 file)
Channel coupling: AC-DC
One key automatic: standby
Waveform measurement: 14 types
Measurement accuracy: ±2%
Reference waveform: standby
Waveform save: standby
Frequency accuracy: ±0.01%
Packing list:
1 *Oscilloscope
1 *High voltage probe
1 *Alligator clip probe
1 *Data cable
1 *User Manual
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Professional Digital Oscilloscope 500MS/s Sampling Rate 110MHz Analog Bandwidth
Features:
100% brand new and high quality
Made of high-quality materials, durable
FNIRSI-1C15 is a fully functional, practical and cost-effective handheld oscilloscope newly launched by FNIRSI
The real-time sampling rate is 500M, and the analog bandwidth is 110MHz
In addition to all the functions of a conventional handheld oscilloscope, we also added a one-key quick auto function on this basis, so you can easily master the waveform like a desktop computer
We have added a 1k Hz self-checking square wave to FNIRSI-1C15, and the storage depth has been upgraded to 12kpts
Regarding the waveform, you can pause at any time to save the previous frame waveform to the screen, and you can compare it with the currently refreshed waveform. The persistence and scroll mode make it easier to detect and record the waveform
Built-in 3000mAH rechargeable battery, can work continuously for more than 10 hours after fully charged
The body is equipped with a high-quality silicone sleeve, which is non-slip and anti-drop
The joystick replaces the original arrow keys, making the operation simpler and more effective
Use scenario: car maintenance, etc.
Product parameters:
Model: FNIRSI-1C15
Screen size: 2.4 inches
Screen resolution: 320 * 240
Analog bandwidth: 110M
Sampling rate: 500M
1k Hz self-checking square wave: standby
Rise time: <3ns
Storage depth: 12 Kpts
Time base range: 5ns-10s
Vertical sensitivity: 20mv/div-100v/div
Trigger mode: automatic/normal
Trigger type: up/down
Display mode: YT/Scroll
Afterglow time: None/1s/∞
Charging method: 5V / 800mA
Voltage measurement range: ±40v (x1 file); ±400v (x10 file)
Channel coupling: AC-DC
One key automatic: standby
Waveform measurement: 14 types
Measurement accuracy: ±2%
Reference waveform: standby
Waveform save: standby
Frequency accuracy: ±0.01%
Quantity: 1
Package list:
1 *Oscilloscope
1 *High voltage probe
1 *Alligator clip probe
1 *Data cable
1 *User Manual
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

For FNIRSI-1C15 2.4" Handheld Digital Oscilloscope 500 MS/s Sampling Rate 110MHz
Features:
100% brand new and high quality
Made of high-quality materials, durable
FNIRSI-1C15 is a fully functional, practical and cost-effective handheld oscilloscope newly launched by FNIRSI
The real-time sampling rate is 500M, and the analog bandwidth is 110MHz
In addition to all the functions of a conventional handheld oscilloscope, we also added a one-key quick auto function on this basis, so you can easily master the waveform like a desktop computer
We have added a 1k Hz self-checking square wave to FNIRSI-1C15, and the storage depth has been upgraded to 12kpts
Regarding the waveform, you can pause at any time to save the previous frame waveform to the screen, and you can compare it with the currently refreshed waveform. The persistence and scroll mode make it easier to detect and record the waveform
Built-in 3000mAH rechargeable battery, can work continuously for more than 10 hours after fully charged
The body is equipped with a high-quality silicone sleeve, which is non-slip and anti-drop
The joystick replaces the original arrow keys, making the operation simpler and more effective
Use scenario: car maintenance, etc.
Product parameters:
Model: FNIRSI-1C15
Screen size: 2.4 inches
Screen resolution: 320 * 240
Analog bandwidth: 110M
Sampling rate: 500M
1k Hz self-checking square wave: standby
Rise time: <3ns
Storage depth: 12 Kpts
Time base range: 5ns-10s
Vertical sensitivity: 20mv/div-100v/div
Trigger mode: automatic/normal
Trigger type: up/down
Display mode: YT/Scroll
Afterglow time: None/1s/∞
Charging method: 5V / 800mA
Voltage measurement range: ±40v (x1 file); ±400v (x10 file)
Channel coupling: AC-DC
One key automatic: standby
Waveform measurement: 14 types
Measurement accuracy: ±2%
Reference waveform: standby
Waveform save: standby
Frequency accuracy: ±0.01%
Quantity: 1
Package list:
1 *Oscilloscope
1 *High voltage probe
1 *Alligator clip probe
1 *Data cable
1 *User Manual
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

500MS/s Digital Oscilloscope 110MHz Storage Inverter Auto Repair Newest
Features:
100% brand new and high quality
Made of high-quality materials, durable
FNIRSI-1C15 is a fully functional, practical and cost-effective handheld oscilloscope newly launched by FNIRSI
The real-time sampling rate is 500M, and the analog bandwidth is 110MHz
In addition to all the functions of a conventional handheld oscilloscope, we also added a one-key quick auto function on this basis, so you can easily master the waveform like a desktop computer
We have added a 1k Hz self-checking square wave to FNIRSI-1C15, and the storage depth has been upgraded to 12kpts
Regarding the waveform, you can pause at any time to save the previous frame waveform to the screen, and you can compare it with the currently refreshed waveform. The persistence and scroll mode make it easier to detect and record the waveform
Built-in 3000mAH rechargeable battery, can work continuously for more than 10 hours after fully charged
The body is equipped with a high-quality silicone sleeve, which is non-slip and anti-drop
The joystick replaces the original arrow keys, making the operation simpler and more effective
Use scenario: car maintenance, etc.
Product parameters:
Model: FNIRSI-1C15
Screen size: 2.4 inches
Screen resolution: 320 * 240
Analog bandwidth: 110M
Sampling rate: 500M
1k Hz self-checking square wave: standby
Rise time: <3ns
Storage depth: 12 Kpts
Time base range: 5ns-10s
Vertical sensitivity: 20mv/div-100v/div
Trigger mode: automatic/normal
Trigger type: up/down
Display mode: YT/Scroll
Afterglow time: None/1s/∞
Charging method: 5V / 800mA
Voltage measurement range: ±40v (x1 file); ±400v (x10 file)
Channel coupling: AC-DC
One key automatic: standby
Waveform measurement: 14 types
Measurement accuracy: ±2%
Reference waveform: standby
Waveform save: standby
Frequency accuracy: ±0.01%
Quantity: 1
Package list:
1 *Oscilloscope
1 *High voltage probe
1 *Alligator clip probe
1 *Data cable
1 *User Manual
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

500MS/s Digital Oscilloscope Storage Inverter Auto Repair Finished Newest
Features:
100% brand new and high quality
Made of high-quality materials, durable
FNIRSI-1C15 is a fully functional, practical and cost-effective handheld oscilloscope newly launched by FNIRSI
The real-time sampling rate is 500M, and the analog bandwidth is 110MHz
In addition to all the functions of a conventional handheld oscilloscope, we also added a one-key quick auto function on this basis, so you can easily master the waveform like a desktop computer
We have added a 1k Hz self-checking square wave to FNIRSI-1C15, and the storage depth has been upgraded to 12kpts
Regarding the waveform, you can pause at any time to save the previous frame waveform to the screen, and you can compare it with the currently refreshed waveform. The persistence and scroll mode make it easier to detect and record the waveform
Built-in 3000mAH rechargeable battery, can work continuously for more than 10 hours after fully charged
The body is equipped with a high-quality silicone sleeve, which is non-slip and anti-drop
The joystick replaces the original arrow keys, making the operation simpler and more effective
Use scenario: car maintenance, etc.
Product parameters:
Model: FNIRSI-1C15
Screen size: 2.4 inches
Screen resolution: 320 * 240
Analog bandwidth: 110M
Sampling rate: 500M
1k Hz self-checking square wave: standby
Rise time: <3ns
Storage depth: 12 Kpts
Time base range: 5ns-10s
Vertical sensitivity: 20mv/div-100v/div
Trigger mode: automatic/normal
Trigger type: up/down
Display mode: YT/Scroll
Afterglow time: None/1s/∞
Charging method: 5V / 800mA
Voltage measurement range: ±40v (x1 file); ±400v (x10 file)
Channel coupling: AC-DC
One key automatic: standby
Waveform measurement: 14 types
Measurement accuracy: ±2%
Reference waveform: standby
Waveform save: standby
Frequency accuracy: ±0.01%
Quantity: 1
Package list:
1 *Oscilloscope
1 *High voltage probe
1 *Alligator clip probe
1 *Data cable
1 *User Manual
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Digital Oscilloscope 110MHz Storage Inverter Detection Finished Replacement
Features:
100% brand new and high quality
Made of high-quality materials, durable
FNIRSI-1C15 is a fully functional, practical and cost-effective handheld oscilloscope newly launched by FNIRSI
The real-time sampling rate is 500M, and the analog bandwidth is 110MHz
In addition to all the functions of a conventional handheld oscilloscope, we also added a one-key quick auto function on this basis, so you can easily master the waveform like a desktop computer
We have added a 1k Hz self-checking square wave to FNIRSI-1C15, and the storage depth has been upgraded to 12kpts
Regarding the waveform, you can pause at any time to save the previous frame waveform to the screen, and you can compare it with the currently refreshed waveform. The persistence and scroll mode make it easier to detect and record the waveform
Built-in 3000mAH rechargeable battery, can work continuously for more than 10 hours after fully charged
The body is equipped with a high-quality silicone sleeve, which is non-slip and anti-drop
The joystick replaces the original arrow keys, making the operation simpler and more effective
Use scenario: car maintenance, etc.
Product parameters:
Model: FNIRSI-1C15
Screen size: 2.4 inches
Screen resolution: 320 * 240
Analog bandwidth: 110M
Sampling rate: 500M
1k Hz self-checking square wave: standby
Rise time: <3ns
Storage depth: 12 Kpts
Time base range: 5ns-10s
Vertical sensitivity: 20mv/div-100v/div
Trigger mode: automatic/normal
Trigger type: up/down
Display mode: YT/Scroll
Afterglow time: None/1s/∞
Charging method: 5V / 800mA
Voltage measurement range: ±40v (x1 file); ±400v (x10 file)
Channel coupling: AC-DC
One key automatic: standby
Waveform measurement: 14 types
Measurement accuracy: ±2%
Reference waveform: standby
Waveform save: standby
Frequency accuracy: ±0.01%
Quantity: 1
Package list:
1 *Oscilloscope
1 *High voltage probe
1 *Alligator clip probe
1 *Data cable
1 *User Manual
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

500MS/s Digital Oscilloscope Storage Inverter Auto Repair Finished Replacement
Features:
100% brand new and high quality
Made of high-quality materials, durable
FNIRSI-1C15 is a fully functional, practical and cost-effective handheld oscilloscope newly launched by FNIRSI
The real-time sampling rate is 500M, and the analog bandwidth is 110MHz
In addition to all the functions of a conventional handheld oscilloscope, we also added a one-key quick auto function on this basis, so you can easily master the waveform like a desktop computer
We have added a 1k Hz self-checking square wave to FNIRSI-1C15, and the storage depth has been upgraded to 12kpts
Regarding the waveform, you can pause at any time to save the previous frame waveform to the screen, and you can compare it with the currently refreshed waveform. The persistence and scroll mode make it easier to detect and record the waveform
Built-in 3000mAH rechargeable battery, can work continuously for more than 10 hours after fully charged
The body is equipped with a high-quality silicone sleeve, which is non-slip and anti-drop
The joystick replaces the original arrow keys, making the operation simpler and more effective
Use scenario: car maintenance, etc.
Product parameters:
Model: FNIRSI-1C15
Screen size: 2.4 inches
Screen resolution: 320 * 240
Analog bandwidth: 110M
Sampling rate: 500M
1k Hz self-checking square wave: standby
Rise time: <3ns
Storage depth: 12 Kpts
Time base range: 5ns-10s
Vertical sensitivity: 20mv/div-100v/div
Trigger mode: automatic/normal
Trigger type: up/down
Display mode: YT/Scroll
Afterglow time: None/1s/∞
Charging method: 5V / 800mA
Voltage measurement range: ±40v (x1 file); ±400v (x10 file)
Channel coupling: AC-DC
One key automatic: standby
Waveform measurement: 14 types
Measurement accuracy: ±2%
Reference waveform: standby
Waveform save: standby
Frequency accuracy: ±0.01%
Quantity: 1
Package list:
1 *Oscilloscope
1 *High voltage probe
1 *Alligator clip probe
1 *Data cable
1 *User Manual
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Description:
NanoVNA Testboard Sets/Demo Board Plate Vector Network Analyzer Testing Pc66 New
Item Details:
100% brand new and high quality
Made of high quality material, durable and practical to use
This test board kit is used for NanoVNA or other vector network analyzer user-friendly measurement plug-ins and SMT devices.
This test board contains a plug-in test circuit compatible with for VNWA Testboard, and a set of 0805 and 1206 patch test circuits are added. The SMT circuit cannot fully consider various test situations. Some parts of the test may need to be cut over. Hands-on ability is highly recommended. This circuit board is not soldered before delivery, please bring your own welding tools, please build a test circuit according to your test needs, our shop is not responsible for circuit guidance.
Note: Assembling is needed.
Package Contents:
1 x Testboard Printed Circuit Board
6 x SMA Female Connectors
4 x 6mm Copper Spacers
4 x M2.5 Screws
2 x 40-pin Round Row Seats
2 x 0805 49R9 Calibration Resistors
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
Preview: