- -40%
Nincs szín - DC 9v oszcilloszkóp 0-200 khz szabványos szonda DSO-héj csere praktikus
Nincs szín - DC 9v oszcilloszkóp 0-200 khz szabványos szonda DSO-héj csere praktikus
2 288 Ft
40% megtakarítás
3 814 Ft
Nincs adó
DC 9v Oscilloscope 0-200khz Standard Probe DSO-Shell Replacement Practical
Features:
*DSO-Shell (DSO150) Oscilloscope Full Assembled With P6020 BNC Standard Probe
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Using ARM Cortex-M3 processor (STM32F103C8), built-in 2.4-inch color TFT display
*Based on secondary development, this tool kit, for example, can be changed to a millivolt table, data logger
*With instructions, easy to install and operate
*Auto/Normal/Single Trigger mode for easy capture of instantaneous waveforms
*Available rising or falling edge triggers
*Waveforms that can be observed before triggering (negative delay)
*The waveform display can be frozen at any time (hold function)
*Waveform parameter digital display, including frequency, period, pulse
Width, duty cycle, maximum/minimum/average weight./maximum peak/virtual value
*Waveform storage function: no loss of waveform after power off
*Short circuit, open circuit detection: help users find welding errors
*TFT controller identification function
*SMD has been soldered, more suitable for electronic beginners
Specifications:
*Maximum real-time sampling rate: 1 MSa/s
*Analog bandwidth: 0 - 200khz
*Sensitivity range: 5 - 20mv / div
*Maximum input voltage: 50 Vpk (1X probe)
*Input impedance: 1M ohm / 20pF
*Accuracy: 12 digits
*Record length: 1024 points
*Coupling mode: DC / AC / GND
*Time base range: 500s/Div - 10us / Div
*Trigger mode: automatic, normal, one shot
*Trigger position: buffer center
*Power supply voltage: DC 9v (8 - 10v)
*Current consumption: ~ 120ma @ 9v
*Motherboard size: 94 x 65 mm / 3.7 x 2.56 inches(Approx.)
*Analog board size: 65 x 47 mm / 2.56 x 1.85 inches(Approx.)
*Screen size: 52 x 40 mm / 2 x 1.57 inches(Approx.)
Package Contents:
1*Oscilloscope
1*Probe
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
Features:
*DSO-Shell (DSO150) Oscilloscope Full Assembled With P6020 BNC Standard Probe
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Using ARM Cortex-M3 processor (STM32F103C8), built-in 2.4-inch color TFT display
*Based on secondary development, this tool kit, for example, can be changed to a millivolt table, data logger
*With instructions, easy to install and operate
*Auto/Normal/Single Trigger mode for easy capture of instantaneous waveforms
*Available rising or falling edge triggers
*Waveforms that can be observed before triggering (negative delay)
*The waveform display can be frozen at any time (hold function)
*Waveform parameter digital display, including frequency, period, pulse
Width, duty cycle, maximum/minimum/average weight./maximum peak/virtual value
*Waveform storage function: no loss of waveform after power off
*Short circuit, open circuit detection: help users find welding errors
*TFT controller identification function
*SMD has been soldered, more suitable for electronic beginners
Specifications:
*Maximum real-time sampling rate: 1 MSa/s
*Analog bandwidth: 0 - 200khz
*Sensitivity range: 5 - 20mv / div
*Maximum input voltage: 50 Vpk (1X probe)
*Input impedance: 1M ohm / 20pF
*Accuracy: 12 digits
*Record length: 1024 points
*Coupling mode: DC / AC / GND
*Time base range: 500s/Div - 10us / Div
*Trigger mode: automatic, normal, one shot
*Trigger position: buffer center
*Power supply voltage: DC 9v (8 - 10v)
*Current consumption: ~ 120ma @ 9v
*Motherboard size: 94 x 65 mm / 3.7 x 2.56 inches(Approx.)
*Analog board size: 65 x 47 mm / 2.56 x 1.85 inches(Approx.)
*Screen size: 52 x 40 mm / 2 x 1.57 inches(Approx.)
Package Contents:
1*Oscilloscope
1*Probe
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek