• -44%

Nincs szín - Hőmérséklet-szabályozó modul DC12V MH1210F digitális intelligens termosztát LED

Nincs szín - Hőmérséklet-szabályozó modul DC12V MH1210F digitális intelligens termosztát LED

218 Ft 44% megtakarítás
390 Ft
Nincs adó
Features:
1. High‑quality plastic material, hard, durable and corrosion‑resistant, and also has long service life.
2. Small, light in weight, easy to install and operate, and can be used without complicated steps.
3. Wide temperature control range, temperature control range is ‑50℃‑110℃, control accuracy is 0.1℃.
4. Sophisticated production, provides stable performance, high work efficiency, can better meet your needs.
5. Comes with a high accuracy sensor, you don't need to buy a sensor seperately, saving your cost.
Specifications:Temperature range :-50-110 ℃: 48.5 * 40.1 * 15.8mm
Temperature control mode: ON / OFF
Resolution: When temperature is 0.1℃, the resolution is -9.9~99.9, other temperature segment is 1℃
Control accuracy: 0.1 ℃
Hysteresis accuracy: 0.1℃
rate: 0.5S
High temperature protection: 0-110℃
Supply voltage: DC 12V
Static current: ≤ 35MA, attract current ≤ 65MA
Output voltage: DC 12V
Output power: 10A relay
Measurement input: NTC (10K 0.5% ) Waterproof Sensor
Environmental requirements: -10 ~ 60 ℃ , Humidity 20% -85%
How to use:Connect the power supply and the load, you can supply to the controller,
Is displayed as a measured temperature,
Press the SET button, the display flashes the temperature,
Press - to set the desired temperature,
After setting press SET to confirm return,
The controller automatically performs the relay by setting off!
Lights, LED status descriptions:Indicator: Off The relay is switched off, Always indicate the relay is .
LED: Shows LL is the sensor open, showing ?HH is out of range, the thermostat will be forced to close the relay, the display --- as high temperature protection.
Package Included:
1 x 12V W1209 Digital thermostat Temperature Control Switch Sensor
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Mennyiség

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

A cím elején szereplő szín/minta/méret/típus kerül kiszállításra!
Temperature Controller Module DC12V MH1210F Digital Smart Thermostat LED
Features:
1. High‑quality plastic material, hard, durable and corrosion‑resistant, and also has long service life.
2. Small, light in weight, easy to install and operate, and can be used without complicated steps.
3. Wide temperature control range, temperature control range is ‑50℃‑110℃, control accuracy is 0.1℃.
4. Sophisticated production, provides stable performance, high work efficiency, can better meet your needs.
5. Comes with a high accuracy sensor, you don't need to buy a sensor seperately, saving your cost.
Specifications:Temperature range :-50-110 ℃: 48.5 * 40.1 * 15.8mm
Temperature control mode: ON / OFF
Resolution: When temperature is 0.1℃, the resolution is -9.9~99.9, other temperature segment is 1℃
Control accuracy: 0.1 ℃
Hysteresis accuracy: 0.1℃
rate: 0.5S
High temperature protection: 0-110℃
Supply voltage: DC 12V
Static current: ≤ 35MA, attract current ≤ 65MA
Output voltage: DC 12V
Output power: 10A relay
Measurement input: NTC (10K 0.5% ) Waterproof Sensor
Environmental requirements: -10 ~ 60 ℃ , Humidity 20% -85%
How to use:Connect the power supply and the load, you can supply to the controller,
Is displayed as a measured temperature,
Press the SET button, the display flashes the temperature,
Press - to set the desired temperature,
After setting press SET to confirm return,
The controller automatically performs the relay by setting off!
Lights, LED status descriptions:Indicator: Off The relay is switched off, Always indicate the relay is .
LED: Shows LL is the sensor open, showing ?HH is out of range, the thermostat will be forced to close the relay, the display --- as high temperature protection.
Package Included:
1 x 12V W1209 Digital thermostat Temperature Control Switch Sensor
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
284039278003 - globes (17)
284039278003

Hasonló kategóriák mint 16 :

Reviews

Write your review

Nincs szín - Hőmérséklet-szabályozó modul DC12V MH1210F digitális intelligens termosztát LED

Features:
1. High‑quality plastic material, hard, durable and corrosion‑resistant, and also has long service life.
2. Small, light in weight, easy to install and operate, and can be used without complicated steps.
3. Wide temperature control range, temperature control range is ‑50℃‑110℃, control accuracy is 0.1℃.
4. Sophisticated production, provides stable performance, high work efficiency, can better meet your needs.
5. Comes with a high accuracy sensor, you don't need to buy a sensor seperately, saving your cost.
Specifications:Temperature range :-50-110 ℃: 48.5 * 40.1 * 15.8mm
Temperature control mode: ON / OFF
Resolution: When temperature is 0.1℃, the resolution is -9.9~99.9, other temperature segment is 1℃
Control accuracy: 0.1 ℃
Hysteresis accuracy: 0.1℃
rate: 0.5S
High temperature protection: 0-110℃
Supply voltage: DC 12V
Static current: ≤ 35MA, attract current ≤ 65MA
Output voltage: DC 12V
Output power: 10A relay
Measurement input: NTC (10K 0.5% ) Waterproof Sensor
Environmental requirements: -10 ~ 60 ℃ , Humidity 20% -85%
How to use:Connect the power supply and the load, you can supply to the controller,
Is displayed as a measured temperature,
Press the SET button, the display flashes the temperature,
Press - to set the desired temperature,
After setting press SET to confirm return,
The controller automatically performs the relay by setting off!
Lights, LED status descriptions:Indicator: Off The relay is switched off, Always indicate the relay is .
LED: Shows LL is the sensor open, showing ?HH is out of range, the thermostat will be forced to close the relay, the display --- as high temperature protection.
Package Included:
1 x 12V W1209 Digital thermostat Temperature Control Switch Sensor
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Write your review