Kategóriák

50pcs Welding rods Aluminum Low temperature Soldering Solution Flux cored New
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Good welding effect and low melting point.
* Excellent solderability and corrosion resistance, high thermal conductivity, high electrical conductivity and excellent processing properties.
* No need to solder powder, no need to use other aluminum alloy as flux or salt-based flux. Very convenient and easy to solder.
* Long service life, suitable for welding or surfacing of high strength, forgeable, corrosion resistant alloys.
* Light weight, small size, very easy to bend and carry.
Specification:
*Material: Aluminum
*Length: 50cm(Approx.)
*Optional Diameter: 1.6mm / 2mm(Approx.)
*Color: Silver(As pictures show)
*Quantity: 50
Package Contents:
50*Aluminum Welding Rods
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

50pcs Welding rods Aluminum Low temperature Soldering Solution Flux cored New
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Good welding effect and low melting point.
* Excellent solderability and corrosion resistance, high thermal conductivity, high electrical conductivity and excellent processing properties.
* No need to solder powder, no need to use other aluminum alloy as flux or salt-based flux. Very convenient and easy to solder.
* Long service life, suitable for welding or surfacing of high strength, forgeable, corrosion resistant alloys.
* Light weight, small size, very easy to bend and carry.
Specification:
*Material: Aluminum
*Length: 50cm(Approx.)
*Optional Diameter: 1.6mm / 2mm(Approx.)
*Color: Silver(As pictures show)
*Quantity: 50
Package Contents:
50*Aluminum Welding Rods
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

50pcs Welding rods Equipment 50cm Solution Low temperature Accessories
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Good welding effect and low melting point.
* Excellent solderability and corrosion resistance, high thermal conductivity, high electrical conductivity and excellent processing properties.
* No need to solder powder, no need to use other aluminum alloy as flux or salt-based flux. Very convenient and easy to solder.
* Long service life, suitable for welding or surfacing of high strength, forgeable, corrosion resistant alloys.
* Light weight, small size, very easy to bend and carry.
Specification:
*Material: Aluminum
*Length: 50cm(Approx.)
*Optional Diameter: 1.6mm / 2mm(Approx.)
*Color: Silver(As pictures show)
*Quantity: 50
Package Contents:
50*Aluminum Welding Rods
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

50pcs Welding rods Equipment 50cm Solution Low temperature Accessories
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Good welding effect and low melting point.
* Excellent solderability and corrosion resistance, high thermal conductivity, high electrical conductivity and excellent processing properties.
* No need to solder powder, no need to use other aluminum alloy as flux or salt-based flux. Very convenient and easy to solder.
* Long service life, suitable for welding or surfacing of high strength, forgeable, corrosion resistant alloys.
* Light weight, small size, very easy to bend and carry.
Specification:
*Material: Aluminum
*Length: 50cm(Approx.)
*Optional Diameter: 1.6mm / 2mm(Approx.)
*Color: Silver(As pictures show)
*Quantity: 50
Package Contents:
50*Aluminum Welding Rods
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Tool End Mill Shank Bit Straight Drill Flute Milling 3.175*17mm Silver
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*This CNC drill bit kit can be used for 3D embossing, cutting, engraving, slotting, milling, etc.
*Suitable for the following materials: nylon, resin, ABS, acrylic, PVC, MDF, hardwood, other three-dimensional engraving, surface processing, etc.
Specifications:
*Material: Solid Carbide
*Tool Holder Diameter (SD): 3.175mm (Approx.)
*Cutting Side Diameter (CED): 3.175mm (Approx.)
*Cutting Side Length (CEL): 17mm (Approx.)
*Total Length: 38.5mm (Approx.)
*Color: Silver (As pictures show)
*Quantity: 10Pcs
Package Contents:
10*CNC Router Bits Single Flute Tool
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

S06K-SCLCR06 Lathe Boring Bar Turning Holder 10x CCMT060204-HM Carbide Insert
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Good accessory steel and long life, reducing the user cost of the tool
* High grip, impact resistance and strong, clear speed advantage, can cut large edges and process
* User clamping and convenient replacement, the insert and pad can be replaced only with a wrench
* Practical processing environment, even in very dirty environments (such as cast iron)
* Applicable to: semi-finishing, finishing
Specification:
* Tool Holder Model: S06K-SCLCR06
* Material: Steel
* Tool Holder Diameter: 6 mm(Approx.)
* Tool Holder Length: 125 mm(Approx.)
* Wrench: T8
* Insert: 10pcs CCMT060204
Warm Tips:
The wrench color will be sent at random, thank you for your understanding.
Package Contents:
1*S06K-SCLCR06 Tool Holder
1*T8 Wrench
10*CCMT060204 Insert
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10x 2mm 1/8 Shank Engraving Bit Carbide End Mill Cutter Tool For PCB,SMT Mould
Features:
Use of ultra-fine grain carbide material with good milling, cutting performance, ensure high work efficiency.
Have sufficient bending strength and wear resistance; High hardness, high wear resistance, high strength.
.Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.
High quality and brand new.
Specification:
Model: 539326
Material: Cemented Carbide
Shank Diameter: 3.175mm
Cutting Edge Diameter: 2mm
Overall Length: 38mm
Suitable For: PCB,SMT, CNC, Mould, pastic fiber, carbon fiber, super hard wood, printed circuit board, other precision parts processing.
Package Contents:
10 * End Mill Engraving Bits
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Product description:
Brand new high quality Industrial tool.
Square shaped chuck key with long handle.
Solid heavy duty tool.
The anti-skid pattern is designed in the middle of the chuck wrench to prevent the rod from passing
Forcibly knock the anti-slip pattern into the round hole, causing the part of the pole to break
Material: 45# steel
Type: Chuck Wrench
Surface treatment: blackening
Specification: 8 square, 10 square
Size: as shown
Remarks: Suitable for all kinds of chucks with a size of 80-160.
80-100 chuck with 8 square,130-160 chuck with 10 square
Packing list:
1*Chuck wrench
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Product description:
Brand new high quality Industrial tool.
Square shaped chuck key with long handle.
Solid heavy duty tool.
The anti-skid pattern is designed in the middle of the chuck wrench to prevent the rod from passing
Forcibly knock the anti-slip pattern into the round hole, causing the part of the pole to break
Material: 45# steel
Type: Chuck Wrench
Surface treatment: blackening
Specification: 8 square, 10 square
Size: as shown
Remarks: Suitable for all kinds of chucks with a size of 80-160.
80-100 chuck with 8 square,130-160 chuck with 10 square
Packing list:
1*Chuck wrench
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

10pcs CCGT060202-AK H01 Carbide Inserts Cutter Workholding Turning Tool Parts
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Model: CCGT060202-AK H01
*Material: Carbide
*Color: As pictures show
*Quantity: 10
Package Contents:
10*CCGT060202-AK H01 Inserts
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Replacement Milling Cutters Kit Straight 2 Flute End Steel Accessories
Features:
*5PCS/Set 4-12mm HSS CNC Carbide Straight Shank 2 Flute End Mill Cutter Drill Bit
*100% brand new and high quality
*Mill Cutter, usually used to be assembled on milling machine.
*Suitable for CNC data processing center, carved, high-speed machines.
*Can mill copper, aluminum, tool steel, cast iron, etc.
*High toughness, abrasion resistance, high-speed cutting for the high hardness.
*Can process directly or fine process to the heat treatment mold.
*Reduce the number of tool changes, improve machine actuator movement rhythm, save mold making time.
Specifications:
*Material: Steel
*Color: As Pictures Show
*5 Sizes: 4/ 6/ 8/ 10/ 12mm(Approx)
*Size: Cutting diameter*shank diameter*shank length*overall length(Approx)
4mm*6mm*11mm*55mm
6mm*6mm*13mm*57mm
8mm*8mm*19mm*63mm
10mm*10mm*22mm*72mm
12mm*12mm*26mm*83mm
Package Contents:
5pcs Milling Cutters
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

5Pcs 4MM 4 Flutes End Mill HRC45 Carbide Tungsten Milling Cutter Set CNC Tool
Features:
*Tungsten Carbide End Mill CNC Cutting TiAlN Coated 1mm Diameter Tool 5pcs Set
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*5PCS tungsten carbide 4-slot milling cutter woodworking tool accessories 1mm
*High quality materials, high strength, wear-resistant
*Applicable to DIY home and general construction and engineering
Specifications:
*Flute: 4 flutes
*Material: tungsten carbide
*Coating: aluminum nitride titanium
*Applicable to material hardness: HRC45
*Handle diameter: 4 mm(Approx.)
*Total length: 50 mm(Approx.)
*Groove length: 4 mm(Approx.)
*Cutting diameter: 1 mm(Approx.)
*Quantity: 5pcs / set
Package Contents:
5*End Mill
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Aluminum Carbide Inserts TCGT110204-AK H01 TCGT21.51 Blade Turning High quality
Details:
* 10Pcs carbide inserts for the processing of nonferrous metals, such as aluminum, copper, etc.
* Full fine grinding of the surface of the surrounding surface
* With a sharp edge
* High strength, high toughness, stable and durable.
* Models: TCGT110204-AK H01
* Quantity: 10Pcs
Package contents:
10* Carbide Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

1pc Tapered Ball Nose End Mill Carbide HRC55 2 Flutes Milling Bit Tool Supplies
Details:
*100% Brand new and high quality
*Made of high quality tungsten carbide
*Fit for cutting soft materials, cast iron, cast steel, alloy steel(below HRC55), General speed or high speed milling
*Model: R1.0*20*50-D6 5.7°
*Flutes: 2 Flutes
*Worked Material HRC: 0~55
*Radius: 1.0mm (Approx.)
*Coating: TiAIN
*Shank Diameter: 6mm (Approx.)
*Cutting Length: 20mm (Approx.)
*Overall Length: 50mm (Approx.)
*Single Side Angle: 5.7°
Package Contents:
1*End Mill
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Tips End Mill HRC50 Chamfering Carbide For Aluminum 3-Flute Bits Sleeve
Details:
*100% brand new and high quality
*Spiral design: large capacity and smooth chip removal, not easy to block, sharp edge, reduce heat output
*Carbide: select high quality carbide material to work on the rod body, improve the service life and increase the smoothness
*Chamfering design: smooth handle and chamfering design, convenient for installation and stable work efficiency
*Type: Milling tool
*Model: 45 °3-Flute cutter for aluminum
*Material: Carbide
*Blade diameter: 6mm (Approx.)
*Blade length: 18mm (Approx.)
Shank diameter: 6mm (Approx.)
*Overall length: 50mm (Approx.)
Package Contents:
3*End Mill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Sandpaper Pads 40-120 Grit Red Brown Professional 8 dust holes 1/3 Sheet
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Professional tool for commercial or occasional use
*Aluminium oxide abrasive sheets for longer lasting
*Hard wearing heat resistant full synthetic resin bond
*Strong D weight paper backing with velour backing
*Sanding paper suitable for use on all types of metal and wood on any general sanding applications
*Punched sheets have holes for sanders using dust extraction
*All sheets are designed to be used dry.
*Suitable for sanders that retain the sheets with hook and loop (Hook/Loop) system
*Each paper has 8 dust holes
*Suitable for use on 1/3 sheet orbital sanders (this is the type where the sheet is held in place by the Hook/Loop backing)
*1/3 sheet Hook/Loop Sanding paper
*This listing is for a 20 pack of mixed sandpaper grit varying from 40 to 120 grit
Specifications:
*Material:Aluminium
*Color:Red Brown (As Pictures Show)
*Grit:40,60,80,100,120Grit
*Size:93*190mm(Approx.)
*Quantily:20pcs
Package Contents:
20*Sandpaper Pads(4 * 40 grit,4 * 60 grit,4 * 80 grit,4 *100 grit,4 * 120 grit)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Set Tig torch Head Cap Consumables Black Air cooled Durable Industrial
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*This kit is designed to fit most for WP-17F series TIG torches.
*Handy hint warm torch up before reshaping.
*Flexible design, easy to change or adapt, tough and easy to use
*Applicable Welder: Welding Tip WP-17F
*Material: Plastic Metal
*Main Color: Black (As pictures show)
*Nozzle Type: Flexible
Package Contents:
1 x Tig Welding Torch Head Body
1 x Short Back Cup
1 x Medium Back Cup
1 x Long Back Cup
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

3pcs Carbide End Mill 3 Flutes Milling Cutter Supplies For Aluminum HRC50 6mm
Details:
*100% brand new and high quality
*Spiral design: large capacity and smooth chip removal, not easy to block, sharp edge, reduce heat output
*Carbide: select high quality carbide material to work on the rod body, improve the service life and increase the smoothness
*Chamfering design: smooth handle and chamfering design, convenient for installation and stable work efficiency
*Type: Milling tool
*Model: 45 °3-Flute cutter for aluminum
*Material: Carbide
*Blade diameter: 6mm (Approx.)
*Blade length: 18mm (Approx.)
Shank diameter: 6mm (Approx.)
*Overall length: 50mm (Approx.)
Package Contents:
3*End Mill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Angle Driver Adapter Drill Bit For Electric drill / hand wrenc Durable
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*105 degree right angle extension piece 1/4" hex driver bit drill bracket attachment
*Better drive screws and holes in tight spaces.
*Can be connected to the drill and hand wrench, this is a wrench that can be extended to places where the drill cannot reach.
Specification:
*Material: Chrome Vanadium Steel
*Short: 5.5cm * 3.2cm / 2.2 * 1.3in(Approx.)
*Long: 13.8cm * 3.2cm / 5.4 * 1.3in(Approx.)
*Hex Handle Diameter: 6.35 mm (1/4 inch)(Approx.)
*Color: Black (As pictures show)
Package Contents:
2* 105° Angle Driver Adapter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

1 X Copper Pipe Quick Expander Carbon Steel Swaging Tool Drill Bit High Quality
Features:
*100% brand new and high quality.
*Carbon Steel Material: Carbon Steel materials. Durable and high-frequency quenching. Does not deform easily.
*Conical Design: The radius of the expanded tube is 12mm, 9.5mm, and 6mm or 6.35/9/13mm respectively.
*It can gradually expand the copper pipe wall when working, without suddenly causing the copper pipe to rupture.
*Electric And Manual: You can directly install the expander bit into your electric drill. It can also be installed in a screwdriver and used manually.
*Work Efficiently: As long as you purchase the right size drill, you can achieve a good fit. It is effortless every time you operate.
*Using Methods: Expand the tube at a low speed. Rounding at high speed after molding.
Specifications:
*Material: Carbon Steel
*Color: Gold, Ginger
*Size: (Approx) gold-6/9.5/12mm-0.24x0.37x0.47inch, Ginger*6/9.5/12mm-0.25x0.35x0.5inch
Package Contents:
1PC x Swaging Tool Drill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

1 X Copper Pipe Quick Expander Carbon Steel Swaging Tool Drill Bit High Quality
Features:
*100% brand new and high quality.
*Carbon Steel Material: Carbon Steel materials. Durable and high-frequency quenching. Does not deform easily.
*Conical Design: The radius of the expanded tube is 12mm, 9.5mm, and 6mm or 6.35/9/13mm respectively.
*It can gradually expand the copper pipe wall when working, without suddenly causing the copper pipe to rupture.
*Electric And Manual: You can directly install the expander bit into your electric drill. It can also be installed in a screwdriver and used manually.
*Work Efficiently: As long as you purchase the right size drill, you can achieve a good fit. It is effortless every time you operate.
*Using Methods: Expand the tube at a low speed. Rounding at high speed after molding.
Specifications:
*Material: Carbon Steel
*Color: Gold, Ginger
*Size: (Approx) gold-6/9.5/12mm-0.24x0.37x0.47inch, Ginger*6/9.5/12mm-0.25x0.35x0.5inch
Package Contents:
1PC x Swaging Tool Drill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Expander Swaging Tool Carbon Steel Maintenance Metal Practical Durable
Features:
*100% brand new and high quality.
*Carbon Steel Material: Carbon Steel materials. Durable and high-frequency quenching. Does not deform easily.
*Conical Design: The radius of the expanded tube is 12mm, 9.5mm, and 6mm or 6.35/9/13mm respectively.
*It can gradually expand the copper pipe wall when working, without suddenly causing the copper pipe to rupture.
*Electric And Manual: You can directly install the expander bit into your electric drill. It can also be installed in a screwdriver and used manually.
*Work Efficiently: As long as you purchase the right size drill, you can achieve a good fit. It is effortless every time you operate.
*Using Methods: Expand the tube at a low speed. Rounding at high speed after molding.
Specifications:
*Material: Carbon Steel
*Color: Gold, Ginger
*Size: (Approx) gold-6/9.5/12mm-0.24x0.37x0.47inch, Ginger-*6.35/9/12.7mm-0.25x0.35x0.5inch
Package Contents:
1PC x Swaging Tool Drill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Expander Swaging Tool Carbon Steel Maintenance Metal Practical Durable
Features:
*100% brand new and high quality.
*Carbon Steel Material: Carbon Steel materials. Durable and high-frequency quenching. Does not deform easily.
*Conical Design: The radius of the expanded tube is 12mm, 9.5mm, and 6mm or 6.35/9/13mm respectively.
*It can gradually expand the copper pipe wall when working, without suddenly causing the copper pipe to rupture.
*Electric And Manual: You can directly install the expander bit into your electric drill. It can also be installed in a screwdriver and used manually.
*Work Efficiently: As long as you purchase the right size drill, you can achieve a good fit. It is effortless every time you operate.
*Using Methods: Expand the tube at a low speed. Rounding at high speed after molding.
Specifications:
*Material: Carbon Steel
*Color: Gold, Ginger
*Size: (Approx) gold-6/9.5/12mm-0.24x0.37x0.47inch, Ginger-*6.35/9/12.7mm-0.25x0.35x0.5inch
Package Contents:
1PC x Swaging Tool Drill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

For TIG Welding Tungsten Electrodes 150mm/6 Length Set Consumable WT20 10pcs
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*2% thoriated tungsten electrodes (AWS classification EWTh-2) contain a minimum of 97.30% tungsten and 1.70 to 2.20% thorium.
*They are the most commonly used electrodes today and are preferred for their longevity and ease of use.
*Thorium increases the electron emission qualities of the electrode, which improves arc starts and allows for a higher current carrying capacity.
*This electrode operates far below its melting temperature, which results in a considerably lower rate of consumption and eliminates arc wandering for greater stability.
*It also features a lower level of weld contamination than other electrodes.
*Unlike pure tungsten, these electrodes are only for specialty type AC welding (thin gauge aluminum or materials less than .060-in.), but they are exceptional for DC electrode negative or straight polarity on carbon and stainless steel, nickel and titanium applications.
*During manufacturing, thorium is evenly dispersed throughout the electrode. This evenness allows the electrode to maintain a sharpened edge—the ideal electrode shape for welding thin steel. Sharpening the electrode's point, however, should be done with great care.
Specification:
*Model: WT20
*Color: Red(As pictures show)
*Length: 150mm / 6"(Approx.)
*Optional Size: 1.6*150mm, 2.4*150mm, 3.2*150mm(Approx.)
*Quantity: 10pcs
Package Contents:
10*2% Tungsten Electrodes WT20 150mm / 6" Red
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10pcs Red 2% Tungsten Electrodes Consumables Accessories For TIG Welding WT20
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*2% thoriated tungsten electrodes (AWS classification EWTh-2) contain a minimum of 97.30% tungsten and 1.70 to 2.20% thorium.
*They are the most commonly used electrodes today and are preferred for their longevity and ease of use.
*Thorium increases the electron emission qualities of the electrode, which improves arc starts and allows for a higher current carrying capacity.
*This electrode operates far below its melting temperature, which results in a considerably lower rate of consumption and eliminates arc wandering for greater stability.
*It also features a lower level of weld contamination than other electrodes.
*Unlike pure tungsten, these electrodes are only for specialty type AC welding (thin gauge aluminum or materials less than .060-in.), but they are exceptional for DC electrode negative or straight polarity on carbon and stainless steel, nickel and titanium applications.
*During manufacturing, thorium is evenly dispersed throughout the electrode. This evenness allows the electrode to maintain a sharpened edge—the ideal electrode shape for welding thin steel. Sharpening the electrode's point, however, should be done with great care.
Specification:
*Model: WT20
*Color: Red(As pictures show)
*Length: 150mm / 6"(Approx.)
*Optional Size: 1.6*150mm, 2.4*150mm, 3.2*150mm(Approx.)
*Quantity: 10pcs
Package Contents:
10*2% Tungsten Electrodes WT20 150mm / 6" Red
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Flame Gun Lighter Jet Torch Butane Gas Blow Burner Welding Solder BBQ Camping V1
Detail:
*BBQ Cooking Soldering Butane Jet Gas Torch
*Can be fixed on butane bottles(Not included).
*Electronic ignition, adjustable fire power.
*Copper flame lighter, with preheating tube and heat-insulated ceramic coil.
*Windproof and waterproof, better than electric welding.
*Suitable for BBQ, restaurant, picnic, hiking, camping, etc.
*Item Condition:100% Brand New
*Material:Copper
*Color: As Pictures Show
*Total length:135mm(Approx.),
Tube length:70mm(Approx.),
Nozzle diameter:20mm (Approx.)
*Flame temperature: up to 1350°C
Package Contents:
1*Gas Jet Flame Torch
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Precision MT2 ER16 M10 Collet Chuck Morse Taper Tool Holder 1 Pcs High Quality
Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Easy to use, with good wear resistance
*Model: MT2 ER16-M10
Package Contents:
1*MT2 ER16-M10 Tool Holder
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

10pcs Drill Bit Titanium Plating 4.5mm Shank Ceramic Plastic Brand new
Features:
*100% brand new and high quality.
*Fits for glass, ceramic, wood, metal, plastic, tile, cement.
*It can be used with the ordinary drilling hammer.
*It must be add coolant when it is being used.
*When drilling hole, your force should be slow, especially at the beginning of drilling and when it is drilling the glass through.
Specifications:
*Material : carbide alloy
*Surface Treatment: Titanium Plating
* Head Type: Cross Spear Head
*Drill Diameter: 6mm(approximately)
*Shank Diameter: 4.5mm(approximately)
*Total Length: 72mm(approximately)
Package Contents:
10pcs Drill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Drill Bit High quality Titanium Plating For glass Ceramic Wood Durable
Features:
*100% brand new and high quality.
*Fits for glass, ceramic, wood, metal, plastic, tile, cement.
*It can be used with the ordinary drilling hammer.
*It must be add coolant when it is being used.
*When drilling hole, your force should be slow, especially at the beginning of drilling and when it is drilling the glass through.
Specifications:
*Material : carbide alloy
*Surface Treatment: Titanium Plating
* Head Type: Cross Spear Head
*Drill Diameter: 6mm(approximately)
*Shank Diameter: 4.5mm(approximately)
*Total Length: 72mm(approximately)
Package Contents:
10pcs Drill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Drill Bit High quality Titanium Plating 4.5mm Shank For glass Wood Metal
Features:
*100% brand new and high quality.
*Fits for glass, ceramic, wood, metal, plastic, tile, cement.
*It can be used with the ordinary drilling hammer.
*It must be add coolant when it is being used.
*When drilling hole, your force should be slow, especially at the beginning of drilling and when it is drilling the glass through.
Specifications:
*Material : carbide alloy
*Surface Treatment: Titanium Plating
* Head Type: Cross Spear Head
*Drill Diameter: 6mm(approximately)
*Shank Diameter: 4.5mm(approximately)
*Total Length: 72mm(approximately)
Package Contents:
10pcs Drill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

HSS Step Cone Drill Titanium Hole Cutter 4 - 32mm For Steel Brass Wood Plastic
Feature:
*100% brand new and high quality
*Nitriding gold spiral groove drilling ladder 4-32mm
*This is the New HSS Steel Large Step Cone Drill Titanium Bit Set Hole Cutter, which is made from high quality HSS steel
*With the Titanium coated to reduce friction and heat
*It is very suitable for using to cut holes in a variety of materials including steel, brass, wood, plastic, etc
Specification:
*Shank:Triangle round handle
*Material:HSS
*Surface Treatment:nitrogen treatment (increasing the hardness and abrasion resistance)
*stepped:4,6,8,10,12,14,16,18,20,22,24,26,28,30,32 mm
*Shank:10 mm
Package included:
1* Step Cone Drill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Hex Drill Bit Accessory Replacement Hexagon Tap Countersink 6pcs/set Hot
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Suitable for soft tapping of metal and aluminum. wood. Plastic, etc.
*Multi-purpose drill tap deburring countersink hexagonal bit set.
*The advantages are opening, tapping and chamfering. Drilling, tapping, deburring/counterbore. Reduce processing steps and save time.
*Improve working efficiency Reverse taper taps to prevent damage to threads due to over-drilling of threaded joints. 1/4-inch hexagonal shank is quick and easy to replace.
*Self-centering point, no need for auxiliary center drill or center punch steel drill.
*Suitable for drilling wood. plastic. Fine copper. One step processing. Greatly reduce processing steps, save time and improve work efficiency
Specifications:
*Material:HSS
*Color:Silver (As Pictures Show)
*Size:As Pictures Show
*Quantily:6PCS
Package Contents:
6*Drill Bits
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Step Cone Drill Bit Hole Cutter tool Spiral Step Cone Step Drill Drill Bit Metal
Feature:
*100% brand new and high quality
*Nitriding gold spiral groove drilling ladder 4-32mm
*This is the New HSS Steel Large Step Cone Drill Titanium Bit Set Hole Cutter, which is made from high quality HSS steel
*With the Titanium coated to reduce friction and heat
*It is very suitable for using to cut holes in a variety of materials including steel, brass, wood, plastic, etc
Specification:
*Shank:Triangle round handle
*Material:HSS
*Surface Treatment:nitrogen treatment (increasing the hardness and abrasion resistance)
*stepped:4,6,8,10,12,14,16,18,20,22,24,26,28,30,32 mm
*Shank:10 mm
Package included:
1* Step Cone Drill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Toggle Clamps Quick Release Horizontal Crank Clip 220Lbs Tools Durable
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*This compact fixture is the most economical horizontal toggle clamp.
*Best for quickly pressing down sheet metal or circuit board.
*Widely used in welding, fixtures, and maintenance fields.
*During the clamping process, the lever prevents the function from being affected by the lateral thrust.
*PVC plastic cover handle, easy to operate, safe and comfortable
Specification:
*Product Name: Paper Clip
*Model: 201C
*Type: Level
*Handle Opening Angle: 87°
*Rod Opening Angle: 79°
*Carrying Capacity: 100Kg / 220 Lbs
*Color: Red Black Silver (As pictures show)
*Material: Metal PVC Plastic
Package Contents:
2 * Toggle Clamps
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

2pcs Toggle Clamps 201C Quick Release Holding Metal 220Lbs Tools Durable
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*This compact fixture is the most economical horizontal toggle clamp.
*Best for quickly pressing down sheet metal or circuit board.
*Widely used in welding, fixtures, and maintenance fields.
*During the clamping process, the lever prevents the function from being affected by the lateral thrust.
*PVC plastic cover handle, easy to operate, safe and comfortable
Specification:
*Product Name: Paper Clip
*Model: 201C
*Type: Level
*Handle Opening Angle: 87°
*Rod Opening Angle: 79°
*Carrying Capacity: 100Kg / 220 Lbs
*Color: Red Black Silver (As pictures show)
*Material: Metal PVC Plastic
Package Contents:
2 * Toggle Clamps
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

2X Quick Release Holder Metal PVC Horizontal Crank Clip Toggle Clamp 220Lbs 201C
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*This compact fixture is the most economical horizontal toggle clamp.
*Best for quickly pressing down sheet metal or circuit board.
*Widely used in welding, fixtures, and maintenance fields.
*During the clamping process, the lever prevents the function from being affected by the lateral thrust.
*PVC plastic cover handle, easy to operate, safe and comfortable
Specification:
*Product Name: Paper Clip
*Model: 201C
*Type: Level
*Handle Opening Angle: 87°
*Rod Opening Angle: 79°
*Carrying Capacity: 100Kg / 220 Lbs
*Color: Red Black Silver (As pictures show)
*Material: Metal PVC Plastic
Package Contents:
2 * Toggle Clamps
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

End Mills Coated 1mm Diameter Tool 5pcs Set Tungsten Carbide Practical
Features:
*Tungsten Carbide End Mill CNC Cutting TiAlN Coated 1mm Diameter Tool 5pcs Set
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*5PCS tungsten carbide 4-slot milling cutter woodworking tool accessories 1mm
*High quality materials, high strength, wear-resistant
*Applicable to DIY home and general construction and engineering
Specifications:
*Flute: 4 flutes
*Material: tungsten carbide
*Coating: aluminum nitride titanium
*Applicable to material hardness: HRC45
*Handle diameter: 4 mm(Approx.)
*Total length: 50 mm(Approx.)
*Groove length: 4 mm(Approx.)
*Cutting diameter: 1 mm(Approx.)
*Quantity: 5pcs / set
Package Contents:
5*End Mill
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Durable Clear Welding Cover Protective wear Lens Working wear 20Pcs Welder Cover
Feature:
*100% brand new and high quality
*Suitable for the most standard flip up welding covers or reactor light covers
*Used to protect the darkening element
*Replacement transparent protective lens cover for your auto darkening welding helmet
*The clear lens has a protective strip over either side to prevent damage or scratching to the item before using
*Material: PC
*Dimensions: 110mm x 90mm (Approx.)
*Quantity: 20pcs
*Color: As Pictures Show
Package Contents:
20 * Protective Plates
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

R8 Collet Chuck Metric Mill Chuck Holder HRC 65Mn Spring Steel 7/16-20UNF Thread
Features:
100% brand new and high quality
Made of high-quality materials, durable
Precision grinding to achieve close tolerances
Rectified and grated
Suitable for various milling machine spindle taper holes of R8
Used for clamping tools, replacing the spindle taper hole, easy to use, expanding the scope of use of the machine tool
Product parameters:
Clamping diameter: 5/16 inch
Pull line: 7/16-20UNF
Material: 65Mn spring steel
Hardness: HRC 55
Accuracy: 0.0005 inch (0.013 mm)
Overall length: 103 mm / 4.06 inches
Top diameter: 32 mm/1.26 inch
Bottom diameter: 24 mm/0.94 inch
Package list:
1 *Milling tool chuck holder
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

105° Driver Adapter 3pcs 1/4" Hex Shaft Drill Bit Magnetic Screwdriver Extension
Features:
*100% brand new and high quality
*Extend all kinds of screwdriver bits,screwdriver head conversion uses.Fast fastening,greatly improve work efficiency
*For use in hand-held drivers or power drills, this 1/4 inch female by 1/4 inch male magnetic bit holder
*Very helpful to remove or tighten a large number of screws after you've started or loosened them
*Use with charging screwdriver or power drill. The maximum torque of this 105 degree Angle Driver adapter is 10N and it is only for right angle head.
*NOT FOR impact drill.
*Please adjust the torque to a minimum when using the electric screwdriver. Do not rely on it to tighten the screws if the hand drill is used.
Specifications:
*Material: Stainless Steel Chrome Vanadium Steel
*Color: Black
*Holder length: 60mm/100mm/150mm
*Hex shank: 6.35mm( 1/4" )
*Fit for: 1/4" shank dirver bit
Package Contents:
3*1/4" Hex shaft screwdriver extensions
1*105° Angle Driver Adapter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Screwdriver extensions Steel Black 105° Angle Driver Adapter Practical
Features:
*100% brand new and high quality
*Extend all kinds of screwdriver bits,screwdriver head conversion uses.Fast fastening,greatly improve work efficiency
*For use in hand-held drivers or power drills, this 1/4 inch female by 1/4 inch male magnetic bit holder
*Very helpful to remove or tighten a large number of screws after you've started or loosened them
*Use with charging screwdriver or power drill. The maximum torque of this 105 degree Angle Driver adapter is 10N and it is only for right angle head.
*NOT FOR impact drill.
*Please adjust the torque to a minimum when using the electric screwdriver. Do not rely on it to tighten the screws if the hand drill is used.
Specifications:
*Material: Stainless Steel Chrome Vanadium Steel
*Color: Black
*Holder length: 60mm/100mm/150mm
*Hex shank: 6.35mm( 1/4" )
*Fit for: 1/4" shank dirver bit
Package Contents:
3*1/4" Hex shaft screwdriver extensions
1*105° Angle Driver Adapter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

For hand-held drivers Screwdriver extensions For power drills Steel Black
Features:
*100% brand new and high quality
*Extend all kinds of screwdriver bits,screwdriver head conversion uses.Fast fastening,greatly improve work efficiency
*For use in hand-held drivers or power drills, this 1/4 inch female by 1/4 inch male magnetic bit holder
*Very helpful to remove or tighten a large number of screws after you've started or loosened them
*Use with charging screwdriver or power drill. The maximum torque of this 105 degree Angle Driver adapter is 10N and it is only for right angle head.
*NOT FOR impact drill.
*Please adjust the torque to a minimum when using the electric screwdriver. Do not rely on it to tighten the screws if the hand drill is used.
Specifications:
*Material: Stainless Steel Chrome Vanadium Steel
*Color: Black
*Holder length: 60mm/100mm/150mm
*Hex shank: 6.35mm( 1/4" )
*Fit for: 1/4" shank dirver bit
Package Contents:
3*1/4" Hex shaft screwdriver extensions
1*105° Angle Driver Adapter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
*100% brand new and high quality
*Extend all kinds of screwdriver bits,screwdriver head conversion uses.Fast fastening,greatly improve work efficiency
*For use in hand-held drivers or power drills, this 1/4 inch female by 1/4 inch male magnetic bit holder
*Very helpful to remove or tighten a large number of screws after you've started or loosened them
*Use with charging screwdriver or power drill. The maximum torque of this 105 degree Angle Driver adapter is 10N and it is only for right angle head.
*NOT FOR impact drill.
*Please adjust the torque to a minimum when using the electric screwdriver. Do not rely on it to tighten the screws if the hand drill is used.
Specifications:
*Material: Stainless Steel Chrome Vanadium Steel
*Color: Black
*Holder length: 60mm/100mm/150mm
*Hex shank: 6.35mm( 1/4" )
*Fit for: 1/4" shank dirver bit
Package Contents:
3*1/4" Hex shaft screwdriver extensions
1*105° Angle Driver Adapter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Screwdriver extensions Steel Black 105° Angle Driver Adapter New Useful
Features:
*100% brand new and high quality
*Extend all kinds of screwdriver bits,screwdriver head conversion uses.Fast fastening,greatly improve work efficiency
*For use in hand-held drivers or power drills, this 1/4 inch female by 1/4 inch male magnetic bit holder
*Very helpful to remove or tighten a large number of screws after you've started or loosened them
*Use with charging screwdriver or power drill. The maximum torque of this 105 degree Angle Driver adapter is 10N and it is only for right angle head.
*NOT FOR impact drill.
*Please adjust the torque to a minimum when using the electric screwdriver. Do not rely on it to tighten the screws if the hand drill is used.
Specifications:
*Material: Stainless Steel Chrome Vanadium Steel
*Color: Black
*Holder length: 60mm/100mm/150mm
*Hex shank: 6.35mm( 1/4" )
*Fit for: 1/4" shank dirver bit
Package Contents:
3*1/4" Hex shaft screwdriver extensions
1*105° Angle Driver Adapter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Aluminum Carbide Inserts Copper Turning TCGT110204-AK H01 TCGT21.51 Practical
Details:
* 10Pcs carbide inserts for the processing of nonferrous metals, such as aluminum, copper, etc.
* Full fine grinding of the surface of the surrounding surface
* With a sharp edge
* High strength, high toughness, stable and durable.
* Models: TCGT110204-AK H01
* Quantity: 10Pcs
Package contents:
10* Carbide Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Aluminum Carbide Inserts Copper TCGT110204-AK H01 TCGT21.51 Cutter Practical
Details:
* 10Pcs carbide inserts for the processing of nonferrous metals, such as aluminum, copper, etc.
* Full fine grinding of the surface of the surrounding surface
* With a sharp edge
* High strength, high toughness, stable and durable.
* Models: TCGT110204-AK H01
* Quantity: 10Pcs
Package contents:
10* Carbide Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Iron Diamond Drill Bits Diamond Drill Bits 3-42mm Silver Drill holes Hot
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
*Other Features: With a smooth nickel-plated surface, the resistance of the drill is reduced to a minimum, so that precise holes can be easily drilled in seconds.
*The diamond drill bit drills the hole diagonally to make a circular braid, and then keep the drill straight. Water lubrication is required when drilling.
*Suitable for drilling holes in glass, tile bottles, brick jars, fiberglass ceramic tiles, slate marble, granite pumice (especially glass and ceramic tiles).
*Each diamond hole saw is smooth and precise polished, which reduces the cutting resistance and drilling pressure, and uses water lubrication.
*Please start drilling at a 45 degree angle and align the hole form at a 90 degree angle
*Simple operation and convenient use.
*Work better with an electric drill. (not included)
Specification:
*Material: Iron, Nickel Plated, Diamond Coating
*Color: Silver (as shown in the picture)
*Size: 3/4/5/6/8/10/12/14/16/18/20/22/25/26/42mm (as pictures show)
*Quantity: 15
Package Content:
15* Diamond-Coated Hole Saw Bits
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

50pcs Set Silver Solution Welding Soldering Flux Cored Rods Aluminum Accessory
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Good welding effect and low melting point.
* Excellent solderability and corrosion resistance, high thermal conductivity, high electrical conductivity and excellent processing properties.
* No need to solder powder, no need to use other aluminum alloy as flux or salt-based flux. Very convenient and easy to solder.
* Long service life, suitable for welding or surfacing of high strength, forgeable, corrosion resistant alloys.
* Light weight, small size, very easy to bend and carry.
Specification:
*Material: Aluminum
*Length: 50cm(Approx.)
*Optional Diameter: 1.6mm / 2mm(Approx.)
*Color: Silver(As pictures show)
*Quantity: 50
Package Contents:
50*Aluminum Welding Rods
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

50pcs Set Silver Solution Welding Soldering Flux Cored Rods Aluminum Accessory
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Good welding effect and low melting point.
* Excellent solderability and corrosion resistance, high thermal conductivity, high electrical conductivity and excellent processing properties.
* No need to solder powder, no need to use other aluminum alloy as flux or salt-based flux. Very convenient and easy to solder.
* Long service life, suitable for welding or surfacing of high strength, forgeable, corrosion resistant alloys.
* Light weight, small size, very easy to bend and carry.
Specification:
*Material: Aluminum
*Length: 50cm(Approx.)
*Optional Diameter: 1.6mm / 2mm(Approx.)
*Color: Silver(As pictures show)
*Quantity: 50
Package Contents:
50*Aluminum Welding Rods
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10pcs CCGT09T302-AK H01 CCGT32.50.5 CNC Carbide Insert For Aluminum Alloy
Item Details:
100% brand new and high quality
Made of high quality material, durable and practical to use
Model: CCGT09T302-AK H01
Material: Carbide
Color: As the picture shows
Package Contents:
10*CCGT09T302-AK H01 Insert
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.