Kategóriák

Welding Stubby Collet TIG Pyrex Glass Cup Kit For WP17/18/26 3/32" Series Torch
Welding Stubby collet TIG Pyrex Glass Cup Kit For WP17/18/26 3/32" series torch
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
*Ideal for welding manifolds or any occasion where good gas coverage is required
*Champagne Nozzle kit is suitable for WP17/18/26 3/32" series tig cutting torch
*Set of 5 TIG argon arc welding torch cup champagne nozzles for *WP17/18/26 3/32" 2.4mm
*Color: as shown
*Glass height: 47 mm
Package Contents:
1 *glass cup
1 *CK4CBGSS collet body
1 *CK3HSGSS energy saver for 3/32" pole
1 *Stubby collet 3/32"
1 *18CGS gas lens insulator
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Threading Tool Boring Bar Turning SNR0013M16 Lathe 10x AG60 Steel Kits New Sale
Features:
Applying for turning, copy turning and facing, is suitable for cutting fluid.
Good toughness and hardness, show a perfect machining effect.
Used on turning lathe machine.
It can reduce the tool grinding cost and improve the cutting efficiency.
Enhance the surface gloss of the cutting pieces.
High quality and brand new.
Specification:
Material: Steel
Color: Black (As Picture Show)
Direction Right
Shank Diameter: 13mm/0.5 inch
Overall Length: 160mm/6 inch
Package Contents:
1 * Internal Threading Tool Holder
1 * Wrench
10 * Blades
(Wrench included, threading cabide insert is not included.)
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

13x160mm Boring Bar Threading Turning Tools SNR0013M16 CNC Mill Lathe 10x AG60
Features:
Applying for turning, copy turning and facing, is suitable for cutting fluid.
Good toughness and hardness, show a perfect machining effect.
Used on turning lathe machine.
It can reduce the tool grinding cost and improve the cutting efficiency.
Enhance the surface gloss of the cutting pieces.
High quality and brand new.
Specification:
Material: Steel
Color: Black (As Picture Show)
Direction Right
Shank Diameter: 13mm/0.5 inch
Overall Length: 160mm/6 inch
Package Contents:
1 * Internal Threading Tool Holder
1 * Wrench
10 * Blades
(Wrench included, threading cabide insert is not included.)
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

1Pcs 9-8218 Shield Cup Welding Plasma Torches For Thermal Dynamics SL60/SL100
Details:
High quality and brand new
Fitment: Fit for Thermal Dynamics® SL60 and SL100 Plasma Torches
Color: Blue Gray (As Picture Show)
Package Contents:
1 * 9-8218 Shield Cap
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

17PCS Door Window Hinge Hole Opener Puncher Twisted Drill Bit wrench Carpenter
Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Materials:high speed steel
*Shank Type:Hex
*Diameter:13/64",1/4",5mm,11/64",7/64",5/64",9/64" (Approx.)
*13/64" is suitable for self-tapping screws of 6-6.5mm.
1/4" is suitable for self-tapping screws of 7-7.5mm.
5mm is suitable for self-tapping screws of 5.5-6mm.
11/64" is suitable for self-tapping screws of 5-5.5mm.
7/64" is suitable for self-tapping screws of 3-3.5mm.
5/64" is suitable for self-tapping screws of 2.2-2.8mm.
9/64" is suitable for self-tapping screws of 4-4.5mm.
*Color: As Pictures Show
Package Contents:
8*Hole Opener
8*Drills
1*Wrench
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

20pcs Set Inserts Manufacturing Indexable APMT1604/PDER DP5320 Carbide Insert
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Suitable for simple steel processing, high hardness is not recommended
*Color: As pictures show
*Quantity: 20
*20Pcs 25R0.8 indexable insert APMT1604 PDER DP5320 carbide insert
Package Contents:
20*Inserts
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Radius 1.0mm End Mill Tapered Ball Nose Part 1/8 Shank HRC55 CNC Router Bits New
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Suitable Materials :For cutting soft materials, cast iron, cast steel, alloy steel(below HRC55), General speed or high speed milling.
Specifications:
Material: High Quality Tungsten Carbide
Model:R1.0-D1/8-TiAlN
Flutes: 2 Flutes;
Worked Material: HRC: 0~55
Coating: TiAIN;
Radius:1.0mm;(Approx.)
Shank Diameter: 1/8"(Approx.)
Cutting Length: 15mm(Approx.)
Overall Length: 1-1/2"(Approx.)
Package Contents:
5 * End Mill With Plastic Box
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Tool Holder M5*16 16x125mm 2mm-Width Accessories Lathe External Grooving
Details:
* These inserts have high strength, high toughness and good wear resistance.
* Cutting fast, accuracy and stability.
* They are stable and durable.
* Holder : MGEHR2020-2
* Insert: MGMN200-G NC3020
* Screw: M5*16
* Wrench: LT4.0
* Cutting depth: 16mm(approx)
* Width: 2mm(approx)
* Holder Total length:125mm(approx)
Package contents:
1* Holder
10* Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Kit Adapter Water Cooled&Gas Brass 3pcs Quick Fast Connector Practical
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
*Quick connection of water/gas between welding torch and welding plug.
*These quick connectors are easy to install.
*Recommended fitting inner diameter for M8 hose.
*Made of high-quality brass, it has strong wear resistance, so it is durable.
*They can be used for MIG TIG welding guns.
Specifications:
*Material: brass
*Model: M8
*Size: as shown
*Color: red, gold, blue
*Weight: 196g/6.9oz (approximately)
Package Contents:
3 *Quick connector
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Item Details:
*SDJCR1616H11 Lathe External Turning Tool Holder DCMT11T304 Inserts Wrench Kit
*Fits for semi-finishing and finishing
*Perfect for high hardness materials and cast iron
*Made of high quality material, high grip strength and impact resistance, good toughness and hardness, durable and practical
*To maintain tight tolerances unmatched performance
*User clamping and convenient way to replace, only a wrench to complete the replacement of the blade and pad
*100% brand new and high quality
*Color: As Pictures Show
*Holder Model: SDJCR1616H11
*Holder Shank D:16mm (Approx.)
*Holder Shank L:100mm (Approx.)
*Accept Insert: DCMT11T304 (DCMT 32.5)
*Wrench: T15
Package Contents:
1*SDJCR1616H11 Holder
10*Inserts
1*Wrench
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

16mm S16Q-SCLCR09 Boring Bar Turning Tools Holder 10Pcs CCMT09T3 Inserts Kit
Details:
These inserts and lathe turning tool is widely used for semi-finishing, finishing
To maintain tight tolerances unmatched performance.
High grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing.
User clamping and convenient way to replace, only a wrench to complete the replacement of the blade and pad
Model: S16Q-SCLCR09
Shank Diameter: approx. 16mm
Shank L: approx. 180mm
Wrench: T15
Wrench size: approx. 80*25mm
Inserts Material: steel
Accept Insert: CCMT09T3 (CCMT32.5)
Package contents:
1* S16Q-SCLCR09 holder
1 * T15 wrench
10 * CCMT09T3 inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

PP Drill Bit Storage Case 1mm-13.0mm Easy to Use Box Durable Practical
Features:
*100% brand new and high quality.
*This product is designed to store nail drill bits.
*Firm and flat PP base, won't slip easily.
*If you always look for those tiny bits, you definitely need this organizer.
*The storage stand totally include 100 holes, can be used to store many nail drill bits.
*Drill bit storage case can make nail drill bits look tidy and orderly, is safe and convenient to use.
Specifications:
*Material: PP
*Number of Holes: 100
*91 Holes: 1mm-10mm (Difference 0.1mm)
*Other Holes: 10.5mm, 10.8mm, 11.0mm, 11.5mm, 11.8mm, 12.0mm, 12.5mm, 12.8mm, 13.0mm.
*Features: Storage Tool, Easy to Use, Convenient
*Size: 17.5cm x 17.5cm x 8cm/6.89" x 6.89" x 3.15" (Approx.)
Package Contents:
2pcs x Drill Bit Storage Case (Others not Included)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

12pcs/Set Lathe External Turning Tool Holder With Inserts Wrench Kit Supplies
Item Details:
*SDJCR1616H11 Lathe External Turning Tool Holder DCMT11T304 Inserts Wrench Kit
*Fits for semi-finishing and finishing
*Perfect for high hardness materials and cast iron
*Made of high quality material, high grip strength and impact resistance, good toughness and hardness, durable and practical
*To maintain tight tolerances unmatched performance
*User clamping and convenient way to replace, only a wrench to complete the replacement of the blade and pad
*100% brand new and high quality
*Color: As Pictures Show
*Holder Model: SDJCR1616H11
*Holder Shank D:16mm (Approx.)
*Holder Shank L:100mm (Approx.)
*Accept Insert: DCMT11T304 (DCMT 32.5)
*Wrench: T15
Package Contents:
1*SDJCR1616H11 Holder
10*Inserts
1*Wrench
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Welding Accessories Parts Collet Durable High quality Useful Practical
Item Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* With excellent plasticity, toughness and crack resistance, especially higher low temperature impact toughness.
* Application: It can be used for argon arc welding and argon arc welding in various positions of pipelines, which can meet the requirements of welding joints. It can weld carbon steel and some low alloy steel.
* Can use for WP-17 WP-18 WP-26 TIG welding torch
* Suitable for: WP-17 / 18/26
* Color: As pictures show
* Type: Welding Accessories
* Scope of Application: TIG
Package Contents:
1*17GL040 Collet Body Stubby Gas Lens 1.0mm 040 "
1*17GL116 Collet Body Stubby Gas Lens 1.6mm 1/16 "
1*17GL332 Collet Body Stubby Gas Lens 2.4mm 3/32 "
1*17GL18 Collet Body Stubby Gas Lens 3.2mm 1/8 "
1*10N22S Stubby Collet 1.0mm .040 "
1*10N23S Stubby Collet 1.6mm 1/16 "
1*10N24S Stubby Collet 2.4mm 3/32 "
1*10N25S Stubby Chuck 3.2mm 1/8 "
2*Gas Lens Insulators
4*Heat-Resistant Glass Cups 15 X 2.5 X 25mm
6*High Temperature O-Rings 9mm X 2.65
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Tool Soldering Pad 1pc Workbench Insulation Welding Equipment Grey Useful
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* The pads is with 68 slots to classify the removed small components and are easily accessible.
* Designed with multiple hole positions to fix screws, IC chips and small parts.
* Silicone mat material is non-toxic and tasteless
* Heat-resistant 932 ° F (500degree Celsius) protects your workbench from high temperature damage
* Using silicone material, it is not easy to deform after folding.
* Easy to wash with water.
* Applicable to repair and maintenance of hot air torch, soldering station, tablet, computer, mobile phone. It is also applicable to other maintenance platforms, laminating machines and bubble removing machines.
Specification:
* Material: Silicone
* Color: Grey (As pictures show)
* Size: 40.4x30.3cm / 15.9 "x 12"(Approx.)
* Thickness: 5mm(Approx.)
* Heat Resistance: 500 ° C
Package Contents:
1*Thermal Pad (Other Items NOT Included)
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

S16Q-SCLCR09 Turning Tool Holder Lathe Boring Bar &10pcs CCMT09T3 Inserts &T15
Details:
These inserts and lathe turning tool is widely used for semi-finishing, finishing
To maintain tight tolerances unmatched performance.
High grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing.
User clamping and convenient way to replace, only a wrench to complete the replacement of the blade and pad
Model: S16Q-SCLCR09
Shank Diameter: approx. 16mm
Shank L: approx. 180mm
Wrench: T15
Wrench size: approx. 80*25mm
Inserts Material: steel
Accept Insert: CCMT09T3 (CCMT32.5)
Package contents:
1* S16Q-SCLCR09 holder
1 * T15 wrench
10 * CCMT09T3 inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

T15 wrench Lathe tool Holder 10Pcs CCMT09T3 Inserts Sale Stock High quality
Details:
These inserts and lathe turning tool is widely used for semi-finishing, finishing
To maintain tight tolerances unmatched performance.
High grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing.
User clamping and convenient way to replace, only a wrench to complete the replacement of the blade and pad
Model: S16Q-SCLCR09
Shank Diameter: approx. 16mm
Shank L: approx. 180mm
Wrench: T15
Wrench size: approx. 80*25mm
Inserts Material: steel
Accept Insert: CCMT09T3 (CCMT32.5)
Package contents:
1* S16Q-SCLCR09 holder
1 * T15 wrench
10 * CCMT09T3 inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Plastic End mill Replacement 4 Flutes Tungsten CNC Cutter tool Durable
Features:
*7pcs 1-8mm 50° 4 Flutes Tungsten Carbide End Mill Set CNC Milling Cutter Tool
*100% brand new and high quality
*Durable and practical
*Four flute design provides small chip loads and quicker removal
*Ideal for wood, plastic, aluminum plate, etc
*Suitable for DIY, Home and General Building/Engineering Using
Specifications:
*Flute: 4
*Model Number: M1-8 HRC50
*Material: Solid carbide
*Coating: Nitrogen coated
*KVS Features: HRC50 For general steel alloy steel mold steel
*Highest cutting hardness: HRC50
*Quantity: 7pcs/set (1~8mm)
*Head diameter: 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 8mm (Approx)
*Shank diameter: 4mm, 4mm, 4mm, 4mm, 6mm, 8mm, 8mm (Approx)
*Cutting leaf length: 3mm, 6mm, 8mm, 11mm, 13mm, 16mm, 20mm (Approx)
*Total length: 50mm, 50mm, 50mm, 50mm, 50mm, 50mm, 60mm (Approx)
Package Contents:
1 Set of End Mill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

P80 Welding Torch Head Parts Kit Arc Welder Body Trimming Solder Repair
Details:
*100% brand new and high quality
*Suitable for argon arc welding
*Brass metal head, reliable and durable
*Operating pressure: 0.2--0.6PA
*Cutting thickness: 16mm (Approx.)
*Size: 23.0 x 7.0 x 3.5cm (Approx.)
Package Contents:
1*P80 Welding Torch Head
1*Tool
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Battery Spot Welding Pen 90 -150A Spot welding machine 12V-14.6V Great
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Portable, stable and reliable spot welder kit
*Lithium/26650/32650 battery battery spot welding machine spot welding pen circuit board kit 12V-14.6V
*Used for welding li/26650/32650 lithium batteries, etc.
*Powered by 12V battery (not including internal). Welding current is about 90A~130A
*Suitable for welding common 0.1mm~0.15mm nickel plated plates
*Upgrade to automatically trigger welding, release your finger to click the button
*The battery pack that can start the car can basically meet the power requirements of the circuit
*Note: This is an upgraded version. 12.-14.6v battery (not included) instead of capacitor.
*Recommended battery (not including internal):
Suitable for 20-45ah lead-acid batteries with good performance and small internal resistance
Suitable for 3.5-5.5ah 45C 3S aviation model lithium battery pack
Suitable for 30-35ah capacity lithium battery pack
*Features:
The circuit is powered by a 12V battery and will become an energy storage spot welder. It can be used to weld nickel sheets of lithium batteries, nickel-chromium batteries, etc.
According to different configurations, the thickness that can be welded is about 0.1mm-0.15mm. Then, the device is designed for electronics enthusiasts, and its operating frequency is not very high.
Specifications:
*Color:As Pictures Show
*System voltage: 12V-14.6V
*Working current: 90-150A
Switch function:
Keep the switch for 1.5 seconds to turn on. The green light flashes, and a low-power spot welding pulse is output every 3 seconds.
Press the switch for 1.5 seconds. The blue light flashes, and mid-power spot welding pulses are output every 3 seconds.
Press the switch for 1.5 seconds. The red light flashes, and a high-power spot welding pulse is output every 3 seconds.
Press the switch for 1.5 seconds to turn off.
Package Contents:
1 * Motherboard
1 * Buzzer
2 * 10AWG input wire
2 * 12AWG output wire and soldering pen
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Professional Toolholder Accessories Home Metalworking External Durable
Item Details:
*100% Brand new and high quality
*MCLNR2020K12 (20 * 20 * 125mm) valgus
*Tool holder without CNMG1204 blade
*Model: MCLNR2020K12
*Right angle: 20mm
*Total length: 125m
*Direction: Right hand
*Negative Rake
*Negative 5 degree cutting edge angle
*Accept the following square blades: CNMA, CNMG, CNMM,
*Blade IC: 12.7mm (1/2''), T: 4.76mm (3/16'')
*Does not include blades
Package Contents:
1*Toolholder
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
Applying for turning, copy turning and facing, is suitable for cutting fluid.
Good toughness and hardness, show a perfect machining effect.
Used on turning lathe machine.
It can reduce the tool grinding cost and improve the cutting efficiency.
Enhance the surface gloss of the cutting pieces.
High quality and brand new.
Specification:
Material: Steel
Color: Black (As Picture Show)
Direction Right
Shank Diameter: 13mm/0.5 inch
Overall Length: 160mm/6 inch
Package Contents:
1 * Internal Threading Tool Holder
1 * Wrench
10 * Blades
(Wrench included, threading cabide insert is not included.)
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* The pads is with 68 slots to classify the removed small components and are easily accessible.
* Designed with multiple hole positions to fix screws, IC chips and small parts.
* Silicone mat material is non-toxic and tasteless
* Heat-resistant 932 ° F (500degree Celsius) protects your workbench from high temperature damage
* Using silicone material, it is not easy to deform after folding.
* Easy to wash with water.
* Applicable to repair and maintenance of hot air torch, soldering station, tablet, computer, mobile phone. It is also applicable to other maintenance platforms, laminating machines and bubble removing machines.
Specification:
* Material: Silicone
* Color: Grey (As pictures show)
* Size: 40.4x30.3cm / 15.9 "x 12"(Approx.)
* Thickness: 5mm(Approx.)
* Heat Resistance: 500 ° C
Package Contents:
1*Thermal Pad (Other Items NOT Included)
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

7pcs End mill Tungsten CNC Removal Aluminum plate Replacement 4 Flutes
Features:
*7pcs 1-8mm 50° 4 Flutes Tungsten Carbide End Mill Set CNC Milling Cutter Tool
*100% brand new and high quality
*Durable and practical
*Four flute design provides small chip loads and quicker removal
*Ideal for wood, plastic, aluminum plate, etc
*Suitable for DIY, Home and General Building/Engineering Using
Specifications:
*Flute: 4
*Model Number: M1-8 HRC50
*Material: Solid carbide
*Coating: Nitrogen coated
*KVS Features: HRC50 For general steel alloy steel mold steel
*Highest cutting hardness: HRC50
*Quantity: 7pcs/set (1~8mm)
*Head diameter: 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 8mm (Approx)
*Shank diameter: 4mm, 4mm, 4mm, 4mm, 6mm, 8mm, 8mm (Approx)
*Cutting leaf length: 3mm, 6mm, 8mm, 11mm, 13mm, 16mm, 20mm (Approx)
*Total length: 50mm, 50mm, 50mm, 50mm, 50mm, 50mm, 60mm (Approx)
Package Contents:
1 Set of End Mill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Spot Welding Circuit board kits Battery Energy Storage DIY Pins High Quality
Product description:
100% brand new and high quality
Made of high-quality materials, durable
Fine workmanship, good performance
Easy to use and long life
System voltage: 12V-14.6V
Working current: 90-150A
Battery recommendation:20-45ah lead-acid battery, good performance, low internal resistance
3.5-5.5Ah 45C 3S aviation lithium battery
30-35ah capacity battery
Features:This 12 V battery circuit becomes a memory spot welder for the welding of lithium batteries, nickel-chromium batteries and other nickel sheets
Depending on the configuration, a welding thickness of approximately 0.1 mm to 0.15 mm can be used.
To turn on the power, press and hold the switch for 1.5 seconds (the green light flashes and a low-power spot welding pulse is emitted every 3 seconds)
Press the switch for 1.5 seconds (the blue light flashes and emits a medium power spot welding pulse every 3 seconds). Press the switch for 1.5 seconds
(The red light flashes, and high-performance spot welding pulses are emitted every 3 seconds). To turn off the power, press and hold the switch for 1.5 seconds.
Package list:
1 * Motherboard
1 * Buzzer
2 *10AWG input cable
2 *10AWG output cable (with 2 solder pins)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Circuit board kits Spot Welding DIY Replacement Battery Energy Storage
Product description:
100% brand new and high quality
Made of high-quality materials, durable
Fine workmanship, good performance
Easy to use and long life
System voltage: 12V-14.6V
Working current: 90-150A
Battery recommendation:20-45ah lead-acid battery, good performance, low internal resistance
3.5-5.5Ah 45C 3S aviation lithium battery
30-35ah capacity battery
Features:This 12 V battery circuit becomes a memory spot welder for the welding of lithium batteries, nickel-chromium batteries and other nickel sheets
Depending on the configuration, a welding thickness of approximately 0.1 mm to 0.15 mm can be used.
To turn on the power, press and hold the switch for 1.5 seconds (the green light flashes and a low-power spot welding pulse is emitted every 3 seconds)
Press the switch for 1.5 seconds (the blue light flashes and emits a medium power spot welding pulse every 3 seconds). Press the switch for 1.5 seconds
(The red light flashes, and high-performance spot welding pulses are emitted every 3 seconds). To turn off the power, press and hold the switch for 1.5 seconds.
Package list:
1 * Motherboard
1 * Buzzer
2 *10AWG input cable
2 *10AWG output cable (with 2 solder pins)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Vertical 90° Guide Drill Positioner Wooden Board Locator Punching Hole Working
Features:
*100% Brand new and high quality.
*Material: Aluminum alloy ( anodized surface )
*Optional Color: Red/Blue
*Dimensions:Main body Drill Guide(approx.): 80x55mm/3.1x2.2inch
*Drill bushing: 6/7/8/9/10mm
*Function:Centerlines ensure accurate alignment when drilling into various surfaces.
Package Contents:
1*Hole Puncher Locator
5*Drill bushing(6/7/8/9/10mm)
1*L wrench
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Vertical 90° Guide Drill Positioner Wooden Board Locator Punching Hole Working
Features:
*100% Brand new and high quality.
*Material: Aluminum alloy ( anodized surface )
*Optional Color: Red/Blue
*Dimensions:Main body Drill Guide(approx.): 80x55mm/3.1x2.2inch
*Drill bushing: 6/7/8/9/10mm
*Function:Centerlines ensure accurate alignment when drilling into various surfaces.
Package Contents:
1*Hole Puncher Locator
5*Drill bushing(6/7/8/9/10mm)
1*L wrench
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Soldering Pad Insulation Equipment Grey Tool Silicone Workbench Useful
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* The pads is with 68 slots to classify the removed small components and are easily accessible.
* Designed with multiple hole positions to fix screws, IC chips and small parts.
* Silicone mat material is non-toxic and tasteless
* Heat-resistant 932 ° F (500degree Celsius) protects your workbench from high temperature damage
* Using silicone material, it is not easy to deform after folding.
* Easy to wash with water.
* Applicable to repair and maintenance of hot air torch, soldering station, tablet, computer, mobile phone. It is also applicable to other maintenance platforms, laminating machines and bubble removing machines.
Specification:
* Material: Silicone
* Color: Grey (As pictures show)
* Size: 40.4x30.3cm / 15.9 "x 12"(Approx.)
* Thickness: 5mm(Approx.)
* Heat Resistance: 500 ° C
Package Contents:
1*Thermal Pad (Other Items NOT Included)
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Features:
*100% brand new and high quality.
*This product is designed to store nail drill bits.
*Firm and flat PP base, won't slip easily.
*If you always look for those tiny bits, you definitely need this organizer.
*The storage stand totally include 100 holes, can be used to store many nail drill bits.
*Drill bit storage case can make nail drill bits look tidy and orderly, is safe and convenient to use.
Specifications:
*Material: PP
*Number of Holes: 100
*91 Holes: 1mm-10mm (Difference 0.1mm)
*Other Holes: 10.5mm, 10.8mm, 11.0mm, 11.5mm, 11.8mm, 12.0mm, 12.5mm, 12.8mm, 13.0mm.
*Features: Storage Tool, Easy to Use, Convenient
*Size: 17.5cm x 17.5cm x 8cm/6.89" x 6.89" x 3.15" (Approx.)
Package Contents:
2pcs x Drill Bit Storage Case (Others not Included)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
Applying for turning, copy turning and facing, is suitable for cutting fluid.
Good toughness and hardness, show a perfect machining effect.
Used on turning lathe machine.
It can reduce the tool grinding cost and improve the cutting efficiency.
Enhance the surface gloss of the cutting pieces.
High quality and brand new.
Specification:
Material: Steel
Color: Black (As Picture Show)
Direction Right
Shank Diameter: 13mm/0.5 inch
Overall Length: 160mm/6 inch
Package Contents:
1 * Internal Threading Tool Holder
1 * Wrench
10 * Blades
(Wrench included, threading cabide insert is not included.)
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

30 * Nozzles 30 * Electrodes For PT31 LG40 Cutter Accessories Practical
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Suitable for PT-31 LG-40 cutting torch
The Brand of Machine would be for Rilon, for Riland, for Jasic, for Mitech, for Chiry, for UNT, for Krypton, for Longetivity, for Berlan and so on
Specification:
Rated Welding Current: 40A
Maximum Cutting Thickness: 12MM(Approx.)
Material: Red Copper
Size(L*D): Electrode: 38mm*4mm(Approx.)
Nozzle(Bottom Diameter*Height): 11mm*15mm(Approx.)
Notice:
Manual measurements may exist a little error, please understand.
Package Contents:
30 * Nozzles
30 * Electrodes
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Features:
Profiling bar for semi-finishing and finishing operations;
Bar hardness approximately 45HRC;
Good toughness and hardness, long service life.
It can reduce the tool grinding cost and improve the cutting efficiency;
Good low temperature impact toughness, improved the surface gloss of the cutting pieces.
Specifications:
Suitable for: machining steel
Coatings: Carbide PVD
Material: Metal
Color: Golden
Model:CCMT060204-HM
S10K-SCLCR06 10x125mm Min.Bore 12mm
S08K-SCLCR06 8x125mm Min.Bore 10mm
S07K-SCLCR06 7x125mm Min.Bore 9mm
S06K-SCLCR06 6x125mm Min.Bore 8mm
Package Included:
10 x CCMT060204-HM Insert
1 x S06K-SCLCR06 Boring Bar
1 x S07K-SCLCR06 Boring Bar
1 x S08K-SCLCR06 Boring Bar
1 x S10K-SCLCR06 Boring Bar
4 x T8 wrenchs
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Suitable Materials: For cutting soft materials, cast iron, cast steel, alloy steel(below HRC55), General speed or high speed milling.
Specifications:
Material: High Quality Tungsten Carbide
Model:R0.25-D1/8-TiAlN
Flutes: 2 Flutes;
Worked Material: HRC: 0~55
Coating: TiAIN;
Radius: 0.25mm;(Approx.)
Shank Diameter: 1/8"(Approx.)
Cutting Length: 15mm(Approx.)
Overall Length: 1-1/2" (Approx.)
R0.25-D1/8-TiAlN
R0.5-D1/8-TiAlN
R0.75-D1/8-TiAlN
R1.0-D1/8-TiAlN
R0.25-D1/8-HSi
R0.5-D1/8-HSi
R0.75-D1/8-HSi
R1.0-D1/8-HSi
Package Contents:
5*End Mill With Plastic Box
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Plasma Cutting Torch Consumables Nozzle Electrode Durable Practical New
Item Details:
100% brand new and high quality
Made of high quality material, durable and practical to use
Consumable Type: Plasma Electrode Nozzle Shield Spring Guide
Model: For Bossweld PTC-25 torch & For Trafimet S45 S25 plasma torch consumable kit
WSOEMed plasma cutting torch accessories kit, Not Orginal
Item name: PD-116-8 PR-110 Plasma Cutting Torch Consumables for Trafimet S45 S25 Qty-22
Plasma Torch Nozzle Reference Number:PD-116-8 WSP-08002
Plasma Torch Electrode Reference Number:Pr-110 Wsp-08001
Plasma Torch Shield Reference Number:PC0116 WSP-08014
Plasma Torch Spring Guide Reference Number:CV0010 WSP-08050
Package Contents:
10*Plasma Torch Nozzle
10*Plasma Torch Electrode
1*Plasma Torch Shield
1*Plasma Torch Spring Guide
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Angle Grinder Strip disc Abrasive Polishing Poly Clean Removal 46 grit Durable
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Abrasion resistance, even grinding effect.
* Low dust and low noise.
* Remove paint or rust very quickly without damaging the original surface.
* Anti-blocking, quick peeling, can be used for all coatings and surfaces.
* Applicable to most brands of 100mm angle grinders.
* For surface treatment, conditioning and finishing.
* Ideal for removing paint and paint on wood, stone, metal and fiberglass surfaces.
Specification:
* Material: Stainless Steel Aluminum
* Color: Purple(As pictures show)
* Grit: 46 Grit
* Diameter: 100mm / 4"(Approx.)
* Hole Size: 16mm, 5/8"(Approx.)
* Maximum RPM: 15300 / min
Package Contents:
5 * Grinding Wheels
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

4Pcs Tile Grout Power Scrubber Cleaning Drill Brush Tub Cleaner Combo Tool Set
Features:
*100% brand new and high quality.
*Made of high-quality materials, durable and practical
*The kit contains a medium-hard nylon electric brush, which can be installed on your favorite cordless drill
*High-quality, high-quality bristles with medium stiffness will not scratch.
*Designed to clean car tires, bathtubs, grout, bathroom surfaces, floors, tiles, showers, toilets and carpets.
*High power cleaning suitable for any drill bit-battery or electric
*Good quality and durable.
*The length of the connecting shaft is extremely long, and the brush size is heavy to meet your work and life needs
Specifications:
*Type: drill brush, extension rod
*Color: yellow, black
*Material: high quality plastic wire
*Size: as shown
*Quantity: 4 brushes 1 pole
Package Contents:
4*drilling brush 1 extension rod
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

21pcs S45 Air Plasma Electrode Cutting Torches Retaining Cap For Trafimet Parts
Item Details:
*Made of high quality material, durable and practical to use
*100% brand new and high quality
*Easy to install and convenient to use
*Replacement for Ergocut S45
*Material: Metal
*Color: As Pictures Show
*Quantity: 21pcs
Package Contents:
10*Electrodes
10*Cutting Torches
1*Retaining Caps
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Metal Electrodes Cutter Tip For Trafimet for Ergocut S45 Durable Sale Part
Item Details:
*Made of high quality material, durable and practical to use
*100% brand new and high quality
*Easy to install and convenient to use
*Replacement for Ergocut S45
*Material: Metal
*Color: As Pictures Show
*Quantity: 21pcs
Package Contents:
10*Electrodes
10*Cutting Torches
1*Retaining Caps
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

20N.m Right Angle Drill Adapter Bend Extension Attachment Chuck 90 Degree 500rpm
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*This is a high quality 0.8-10mm right angle drill attachment with max.3 / 8 inch arbor and 9.5mm shank, which makes it suitable for almost all standard drills. It can make the drill's power deflect 90 degrees and reach hard-to-reach places. A great tool for the diy and professional user
*10mm keyless chuck, accept 0.8-10mm drills, with manual tightening / loosening
*9.5 (3/8 inch) rod suits most standard drills: hand / power drills, electric drill, polishing accessories etc.
*Simple to install and operate, with a handle for stable use
Specifications:
*Color: Red Black (As Pictures Show)
*Material: plastic aluminum alloy
*Type: 90 Degree Drill Attachment
*Round rod diameter: 9.5mm / 0.374 inches (Approx.)
*Jaw arbor range (diameter): 0.8-10mm / 0.031-0.393 inches (Approx.)
*Max. Speed: 500 rpm
*Maximum torque: 20n. m
*Product Size: 9 * 6.5 * 4 cm (Approx.)
Package Contents:
1*Right Angle Drill Adapter
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Plasma Nozzle Set Equipment 10Pcs Welding 45A Finecut Reliable Durable
Item Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* 10pcs 220930 Plasma Torch Nozzle for PMX 65 85 105 125 HRT HRT MRT 45Amp for FineCut
* New and premium aftermarket plasma cutting consumables (non-original).
* Based on original models.
* Establish strict quality control standards and test.
* Stable characteristics and high reliability.
* Perfect match, it is a good option to replace the original consumables.
* Part Number: Nozzle 220930
* Amperage: 45A.
* Process: Finecut.
* Compatibility: For 65, 85, 105, HRT, HRT, MRT
* Quantity: 10
* Color: As pictures show
Package Contents:
10 * Nozzles
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Shield 85A Consumables Plasma 65/85/105 Replacement Accessories Access Tool
Details:
Fitment: Fit for 65/85/105
High quality and brand new
Quantity: 5pcs/kit
Color: As Picture Show
Package Contents:
5 * Plasma Shield
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

High Speed Firewood Drill Bit Splitting Cone Driver 4pcs 4pcs/set 4X 4*
Feature:
*100% brand new and high quality
*Made of high-speed steel, has high rigidity and a long service life
*The anti-slip groove design prevents slipping and improves efficiency
*Perfect select for drilling wood
*Applications: Just install the drill bit into the power drill or hammer, and drill the wood, and the firewood will be spiltted easily
Specification:
Material: high speed steel
Color: Black
Shank Shape: Hex Shank, Round Shank,Square Shank
Size: 32mm
Quality:4Pcs/Set
Package content:
4Pcs/set of firewood drill bits
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

500g Capacity Solder pot Stainless Steel Plate Thermal effect Replacement
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* The furnace electronic temperature regulation plate is part of the production of imported components. The tin furnace is made of stainless steel plate, which can be adjusted according to the requirements.
* Easy to maintain, thermal effect, tin melting fast.
* Easy to replace parts.
Specification:
* Power: 150W
* Input Voltage: 220V AC
* Temperature: 200-480degree Celsius
* Melting Time: 5-15min
* Capacity: 500g(Approx.)
* Pot Diameter: 50mm(Approx.)
* Tin Pot Material: Imported Stainless Steel Plate
Package Contents:
1*Solder Pot
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Metal Electrodes For Trafimet Replacement for Ergocut S45 Cutter Tip Useful New
Item Details:
*Made of high quality material, durable and practical to use
*100% brand new and high quality
*Easy to install and convenient to use
*Replacement for Ergocut S45
*Material: Metal
*Color: As Pictures Show
*Quantity: 21pcs
Package Contents:
10*Electrodes
10*Cutting Torches
1*Retaining Caps
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

For Trafimet Electrodes Metal Cutter Tip Replacement for Ergocut S45 Accs Part
Item Details:
*Made of high quality material, durable and practical to use
*100% brand new and high quality
*Easy to install and convenient to use
*Replacement for Ergocut S45
*Material: Metal
*Color: As Pictures Show
*Quantity: 21pcs
Package Contents:
10*Electrodes
10*Cutting Torches
1*Retaining Caps
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

28x/set Diamond Drill Bits Kit For Glass Ceramic Tile Hole Maker Saw Cutting Set
Features:
*100% brand new and high quality
*Hollow glass drill bit is composed of high quality diamond material, which has the advantages of fast and uniform cutting speed, smooth cutting surface and no wrinkle.
* Very suitable for making clean and accurate holes
*Widely used in different occasions:
Drill glass, ceramic bottle, block jar, fiberglass ceramic tile, slate marble, granite pumice.
*Size and quantity:
8mm,10mm ,12mm ,14mm ,16mm ,18mm, 20mm ,22mm ,25mm ,26mm, 28mm, 30mm, 40mm, 50mm ,60mm each 1pcs 13Pcs 6mm
Tips:
A. Can be used with standard electric drill.
B. Do not use it in concrete or in places where the depth exceeds 1/2".
C. Start drilling diagonally, make a round trace, and then straighten the drill bit.
D. Always use water for lubrication, otherwise the diamond hollow drill will burn.
E. Reducing the drilling speed, lowering the drilling weight and increasing the use of water lubrication will greatly extend the service life of the drill bit.
Package Contents:
28*diamond coated drill bits
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

External Tool Turning Holder Bar SDJCR1616H11 16*100mm Lathe DCMT11T304
Details:
Negative 27.5 Degree side cutting edge angle for negiative 55 degree DCMT insert
High quality and brand new
Model: SDJCR1616H11 DCMT11T304 UE6020
Shank D: 16mm
Shank L: 100mm
Screw: M4*8
Wrench: T15
Accept Insert: DCMT 11T3 (DCMT 32.5)
Insert I.C: 9.525mm (3/8") T:3.97mm
Package Contents:
1 * SDJCR1616H11 Turning Tool Holder
1 * Wrench
10 * DCMT11T304 UE6020 Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Durable 3/4-16 Tap Die Right Hand Taper High Speed Steel Metalworking Tool Set
Item Details:
*3/4-16 Tap 3/4-16 Die UNF British US Made Right Hand Taper HSS Metalworking Tool
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Color: Silver(As pictures show)
*Model: 3 / 4-16
*Direction: Right hand
*1pc 3 / 4-16 faucet 1pc 3 / 4-16 mold details UNF UK made in the right hand cone HSS
Package Contents:
1*3 / 4-16 Tap
1*3 / 4-16 Die
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

23Pcs Welding Accessories Gas Lens Kit For WP-17/18/26 TIG Welding Torch Useful
Item Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* With excellent plasticity, toughness and crack resistance, especially higher low temperature impact toughness.
* Application: It can be used for argon arc welding and argon arc welding in various positions of pipelines, which can meet the requirements of welding joints. It can weld carbon steel and some low alloy steel.
* Can use for WP-17 WP-18 WP-26 TIG welding torch
* Suitable for: WP-17 / 18/26
* Color: As pictures show
* Type: Welding Accessories
* Scope of Application: TIG
Package Contents:
1*17GL040 Collet Body Stubby Gas Lens 1.0mm 040 "
1*17GL116 Collet Body Stubby Gas Lens 1.6mm 1/16 "
1*17GL332 Collet Body Stubby Gas Lens 2.4mm 3/32 "
1*17GL18 Collet Body Stubby Gas Lens 3.2mm 1/8 "
1*10N22S Stubby Collet 1.0mm .040 "
1*10N23S Stubby Collet 1.6mm 1/16 "
1*10N24S Stubby Collet 2.4mm 3/32 "
1*10N25S Stubby Chuck 3.2mm 1/8 "
2*Gas Lens Insulators
4*Heat-Resistant Glass Cups 15 X 2.5 X 25mm
6*High Temperature O-Rings 9mm X 2.65
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.