Kategóriák

6PC Countersink Drill Bit KIT 5 Flutes Counter Sink Chamfer Cutter Metal Working
Details:
*Easy to use, 100% high quality
*Durable, suitable for wood, fiberboard, particleboard, plywood, plastic, aluminium board, etc.
*Applicable to DIY, household and general building/engineering use.
*Material: High Speed Steel
*6-Models: 6mm, 8mm, 9mm, 12mm, 16mm, 19mm
*Length: 48mm / 1. 88" (Approx.)
*Color: Gold (As Pictures Show)
Package Contents:
6*Drill Bits
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

CNC End Mill 4 Flutes 100mm Cutter Tool Metalworking Industrial Durable
Details:
*100% brand new and high quality
*Sharp, wear-resistant and hard to break
*Color: Blue Silver (As Pictures Show)
*Material: Carbide
*Head Diameter: d=5mm (Approx.)
*Shank Diameter: D=5mm (Approx.)
*Blade length: L1=18mm (Approx.)
*Full length: L=100mm (Approx.)
*Highest cutting hardness: HRC50
Package Contents:
1*Mill Cutter
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

10* CCMT060204-HM YBC251 Carbide Insert Lathe Turning Tool Metalworking Supplies
Description:
1.This Blade safety good toughness and MTTiCN, thick Al2O3, TiN coating of excellent combination; suitable for steel semi finishing.
2.Blade has high strength, high toughness, stable and durable.
3.For high hardness materials and cast iron.
4.TiN surface finishing, good wear resistance.
5.Mainly used for general steel machining.
Features:
*Item Condition:100% Brand New
*Material:Tungsten Carbide
*Color:Gold (As Pictures Show)
*Material: Tungsten Carbide
*Size: 6x6mm
Thickness: 2.5mm
*Applications: Suitable for steel semi finishing
*Quabtity: 10pcs/box
Package included:
10pcs Carbide Insert
1x Box
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow 1-3mm differences due to manual measurement.
3,This listing is for items listed above only, other accessories (if any) are not included.

Mill Center Drill Bits Tackle Kit Woodworking Slotting Power tool 6pcs Parts
Details:
*100% brand new and high quality
*Each drill has a double end and is ground with a standard 60 degree angle
*Center and spotting drills are traditionally used to make a conical hole for a lathe center in order to make a starting point for a standard drill, designed to prevent the drill from walking
*Used for producing center holds in components or work pieces with require machining between centers
*Color: Silver (As Pictures Show)
* Material: HSS
*Size: 1.0mm 1.5mm 2mm 2.5mm 3mm 5mm (Approx.)
Package Contents:
6*Center Drill Bits
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Toggle Toggle clamp Clamp Clip CNC Hand Tool 4pcs GH-201A Quick release
Item Details:
*100% brand new and high quality
*Toggle Clamp GH-201A 201-A Horizontal Hold
*Useful and Quick Hand Tool Release
*Type: GH-201A
*Material: Metal
*Length: 80mm (Approx)
*Color: As picture shows
*Quantity: 4pcs
Package Contents:
4PCS Toggle Clamps
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Shaft Diameter 10mm T Slot Milling Cutter HSS 6 Flutes Tool New Practical
Item Details:
100% brand new and high quality
Made of high quality material, durable and practical to use
Product Name: T-Slot End Mill
Material: HSS
Color: Gray Silver(As pictures show)
Cutting Diameter: 16 mm(Approx.)
Depth of Cut: 3 mm(Approx.)
Shaft Diameter: 10 mm(Approx.)
Total Length: 60 mm(Approx.)
Weight: 43g(Approx.)
Package Contents:
1 x T Slot Milling Cutter
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

End Mill CNC Metalworking Accessories 1/8" shank CNC milling cutter bit
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Suitable material: Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood.
Ideal for 2D relief sculpturing, cutting, engraving, slotting, milling, etc.
Carbide can run at higher speed than high-speed steel, resisting abrasion and high cutting temperature.
Cutting edge has high precision, sharper, harder hardness, higher wear resistance, higher strength, higher bending, less wear and tear, and long service life.
Specifications:
Product Name: End Mill Cutter
Material: Carbide
Shank Diameter: 3.175mm / 1/8"(Approx.)
Cutting Diameter: 0.8mm / 0.03"(Approx.)
Cutting Length: 3mm / 0.12"(Approx.)
Overall Length: 38mm / 1.5"(Approx.)
Number of Flutes: 2
Quantity: 5pcs
Package Contents:
5 x End Mill Cutter
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Tap Metalworking Consumables Thread High Speed Steel Equipment Durable
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*HSS 3 / 8-32 UNEF right thread pitch 3/8" -32
*Application: cutting and consumables
*Product Name: Tap
*Thread Type: Right-Hand Thread
*Model: 3/8" -32
*Material: High Speed Steel
*Quantity: 1
Package Contents:
1 * Tap
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Gray Blue Screwdriver Bits S2 Steel Kit Set Slip Shank Magnetic Useful
Features:
* This screwdriver drill bits are designed with hex shanks for anti slip operation.
* 100% Brand new and high quality
* Single head with magnetism and skid resistance
* Adopts S2 high grade metal, the whole reflection is hardening
* Anti Slip, with magnetic.
* Suitable for Pneumatic screwdriver , cordless drills and electric screwdriver etc.
* Durable and compact.
Specifications:
* Sharpness:PH2
* Length:50mm(approx)
* Material:S2 Steel
* Shank type: hex shank
* Shank diameter: 1/4"(6.35mm)
* Weight: 115g(approx)
* Color: Gray Blue(as pictures show)
Package contents:
10* 50mm PH2 Screwdriver Bits
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

3-14mm Diamond 11Pcs Drill Bits Tool For Hole Maker Glass Ceramic Mulity use
Features:
*100% Brand New and High Quality
*Diamond glass ceramics marble hole opener cutter drill bit, great for home use, hobby, craft, construction etc.
*Includes 10 kinds of diameters from 3-14mm: 3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm,14mm
*Excellent for making clean and accurate hole on glass and tile
*Can be used with any drill or power tool
*Good performance and durable to use
Specifications:
*Material:Steel Nickel Plated
*Color: As Pictures Show
*Diameters: 3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm,14mm
*Quantity: 11pcs
Package Contents:
11pcs Diamond Coated Drill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

CVD Coated Lathe Turning Steel Alloy Carbide Inserts CCMT060204 CCM Metal Holder
Item Details:
*CCMT060204 Carbide Inserts CCMT0602 For Lathe Turning Tool Holder
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Durable and practical, sharp and portable
*Model: CCMT060204
*Material: Carbide
*Coating: CVD tin Al2O3 TICN
*Processed parts material: steel alloy
*Color: As pictures show
*Quantity: 10pcs to meet your needs
Package Contents:
10*CCMT060204 Inserts (Packed with plastic box)
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Features:
*100% brand new and high quality
*Made of high-quality materials, strong and practical
*Specially designed steel counterbore or counterbore guide hole.
*The depth of the counter bushing can be adjusted using an hex
wrench.
*The standard hexagon handle can be replaced quickly.
*Drills and countersunk heads are used for wood screws, no need to replace the drill bit.
*Just loosen and tighten the fixing screws, you can adjust the drilling length of screws of various lengths.
Specifications:
*Material:Head: YG8 alloy blade
Body: 45# carbon steel
*Cutting diameter: 8/10mm (Approx)
*Color:Orange Silver (As Pictures Show)
*Size: As Pictures Show
*Optional model: (2pcs/set)
2.8*8mm 2.8*10mm,
3.0*8mm 3.0*10mm,
3.2*8mm 3.2*10mm,
3.5*8mm 3.5*10mm
*Usage: used for countersinking and opening of wood and aluminum alloy screws
Package Contents:
2*Countersink Drill Bit (According to your choice)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
*100% brand new and high quality
*Made of high-quality materials, strong and practical
*Specially designed steel counterbore or counterbore guide hole.
*The depth of the counter bushing can be adjusted using an hex
wrench.
*The standard hexagon handle can be replaced quickly.
*Drills and countersunk heads are used for wood screws, no need to replace the drill bit.
*Just loosen and tighten the fixing screws, you can adjust the drilling length of screws of various lengths.
Specifications:
*Material:Head: YG8 alloy blade
Body: 45# carbon steel
*Cutting diameter: 8/10mm (Approx)
*Color:Orange Silver (As Pictures Show)
*Size: As Pictures Show
*Optional model: (2pcs/set)
2.8*8mm 2.8*10mm,
3.0*8mm 3.0*10mm,
3.2*8mm 3.2*10mm,
3.5*8mm 3.5*10mm
*Usage: used for countersinking and opening of wood and aluminum alloy screws
Package Contents:
2*Countersink Drill Bit (According to your choice)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
*100% brand new and high quality
*Made of high-quality materials, strong and practical
*Specially designed steel counterbore or counterbore guide hole.
*The depth of the counter bushing can be adjusted using an hex
wrench.
*The standard hexagon handle can be replaced quickly.
*Drills and countersunk heads are used for wood screws, no need to replace the drill bit.
*Just loosen and tighten the fixing screws, you can adjust the drilling length of screws of various lengths.
Specifications:
*Material:Head: YG8 alloy blade
Body: 45# carbon steel
*Cutting diameter: 8/10mm (Approx)
*Color:Orange Silver (As Pictures Show)
*Size: As Pictures Show
*Optional model: (2pcs/set)
2.8*8mm 2.8*10mm,
3.0*8mm 3.0*10mm,
3.2*8mm 3.2*10mm,
3.5*8mm 3.5*10mm
*Usage: used for countersinking and opening of wood and aluminum alloy screws
Package Contents:
2*Countersink Drill Bit (According to your choice)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
*100% brand new and high quality
*Made of high-quality materials, strong and practical
*Specially designed steel counterbore or counterbore guide hole.
*The depth of the counter bushing can be adjusted using an hex
wrench.
*The standard hexagon handle can be replaced quickly.
*Drills and countersunk heads are used for wood screws, no need to replace the drill bit.
*Just loosen and tighten the fixing screws, you can adjust the drilling length of screws of various lengths.
Specifications:
*Material:Head: YG8 alloy blade
Body: 45# carbon steel
*Cutting diameter: 8/10mm (Approx)
*Color:Orange Silver (As Pictures Show)
*Size: As Pictures Show
*Optional model: (2pcs/set)
2.8*8mm 2.8*10mm,
3.0*8mm 3.0*10mm,
3.2*8mm 3.2*10mm,
3.5*8mm 3.5*10mm
*Usage: used for countersinking and opening of wood and aluminum alloy screws
Package Contents:
2*Countersink Drill Bit (According to your choice)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

2X Countersink Drill Bit Set Carbon Steel Woodworking Screw Holes Chamfer Tools
2X Countersink Drill Bit Set carbon steel Woodworking Screw Holes Chamfer Tools
Features:
*100% brand new and high quality
*Made of high-quality materials, strong and practical
*Specially designed steel counterbore or counterbore guide hole.
*The depth of the counter bushing can be adjusted using an hex
wrench.
*The standard hexagon handle can be replaced quickly.
*Drills and countersunk heads are used for wood screws, no need to replace the drill bit.
*Just loosen and tighten the fixing screws, you can adjust the drilling length of screws of various lengths.
Specifications:
*Material:Head: YG8 alloy blade
Body: 45# carbon steel
*Cutting diameter: 8/10mm (Approx)
*Color:Orange Silver (As Pictures Show)
*Size: As Pictures Show
*Optional model: (2pcs/set)
2.8*8mm 2.8*10mm,
3.0*8mm 3.0*10mm,
3.2*8mm 3.2*10mm,
3.5*8mm 3.5*10mm
*Usage: used for countersinking and opening of wood and aluminum alloy screws
Package Contents:
2*Countersink Drill Bit (According to your choice)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

2X Countersink Drill Bit Set Carbon Steel Woodworking Screw Holes Chamfer Tools
2X Countersink Drill Bit Set carbon steel Woodworking Screw Holes Chamfer Tools
Features:
*100% brand new and high quality
*Made of high-quality materials, strong and practical
*Specially designed steel counterbore or counterbore guide hole.
*The depth of the counter bushing can be adjusted using an hex
wrench.
*The standard hexagon handle can be replaced quickly.
*Drills and countersunk heads are used for wood screws, no need to replace the drill bit.
*Just loosen and tighten the fixing screws, you can adjust the drilling length of screws of various lengths.
Specifications:
*Material:Head: YG8 alloy blade
Body: 45# carbon steel
*Cutting diameter: 8/10mm (Approx)
*Color:Orange Silver (As Pictures Show)
*Size: As Pictures Show
*Optional model: (2pcs/set)
2.8*8mm 2.8*10mm,
3.0*8mm 3.0*10mm,
3.2*8mm 3.2*10mm,
3.5*8mm 3.5*10mm
*Usage: used for countersinking and opening of wood and aluminum alloy screws
Package Contents:
2*Countersink Drill Bit (According to your choice)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

2X Countersink Drill Bit Set Carbon Steel Woodworking Screw Holes Chamfer Tools
2X Countersink Drill Bit Set carbon steel Woodworking Screw Holes Chamfer Tools
Features:
*100% brand new and high quality
*Made of high-quality materials, strong and practical
*Specially designed steel counterbore or counterbore guide hole.
*The depth of the counter bushing can be adjusted using an hex
wrench.
*The standard hexagon handle can be replaced quickly.
*Drills and countersunk heads are used for wood screws, no need to replace the drill bit.
*Just loosen and tighten the fixing screws, you can adjust the drilling length of screws of various lengths.
Specifications:
*Material:Head: YG8 alloy blade
Body: 45# carbon steel
*Cutting diameter: 8/10mm (Approx)
*Color:Orange Silver (As Pictures Show)
*Size: As Pictures Show
*Optional model: (2pcs/set)
2.8*8mm 2.8*10mm,
3.0*8mm 3.0*10mm,
3.2*8mm 3.2*10mm,
3.5*8mm 3.5*10mm
*Usage: used for countersinking and opening of wood and aluminum alloy screws
Package Contents:
2*Countersink Drill Bit (According to your choice)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

2X Countersink Drill Bit Set Carbon Steel Woodworking Screw Holes Chamfer Tools
2X Countersink Drill Bit Set carbon steel Woodworking Screw Holes Chamfer Tools
Features:
*100% brand new and high quality
*Made of high-quality materials, strong and practical
*Specially designed steel counterbore or counterbore guide hole.
*The depth of the counter bushing can be adjusted using an hex
wrench.
*The standard hexagon handle can be replaced quickly.
*Drills and countersunk heads are used for wood screws, no need to replace the drill bit.
*Just loosen and tighten the fixing screws, you can adjust the drilling length of screws of various lengths.
Specifications:
*Material:Head: YG8 alloy blade
Body: 45# carbon steel
*Cutting diameter: 8/10mm (Approx)
*Color:Orange Silver (As Pictures Show)
*Size: As Pictures Show
*Optional model: (2pcs/set)
2.8*8mm 2.8*10mm,
3.0*8mm 3.0*10mm,
3.2*8mm 3.2*10mm,
3.5*8mm 3.5*10mm
*Usage: used for countersinking and opening of wood and aluminum alloy screws
Package Contents:
2*Countersink Drill Bit (According to your choice)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

13Pcs HSS Drill Bit Set Titanium Coated Hardened Hex Shank Quick Change All Size
Welcom to our store : shoppingfromeast
Features:
*100% Brand new,high quality.
*High speed steel drill bit sets,for steel,plastic,wood etc.
*Designed for 1/4" Hex Shank Bits.
*Use with Cordless Screwdrivers,which are not included in this item.
*Ideal for DIY, home and general building/engineering using
Specifications:
* Material:High Speed Steel
* Finish:Titanium Coated
* Shank:1/4'' Hex Shank
* Color:As Pictures Show
* Length:5.5-11cm/3.1-4.3inch
* Size:
1.5mm/0.06inch
2.0mm/0.08inch
2.5mm/0.10inch
3.0mm/0.12inch
3.2mm/0.13inch
3.5mm/0.14inch
4.0mm/0.16inch
4.5mm/0.18inch
4.8mm/0.19inch
5.0mm/0.20inch
5.5mm/0.22inch
6.0mm/0.24inch
6.5mm/0.26inch
Package Contents:
13 PCS * Drill Bit Sets
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Short Collets Tig Welding Torch WP-17 WP-18 10N22S 10N23S 10N24S 10pcs/SET TOOL
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Short collets & short collet bodies allow use of a smaller WP9 ceramic cup on a WP-17 WP-18 or WP-26 tig torch.
This reduces the overall torch head length which gives you the ability to get into confined areas when welding,
Without having to change your tig torch.
Easy to use. Can be used of WP-17 WP-18 WP-26 TIG welding torch
The Brand of Machine would be for Rilon, for Riland, for Jasic, for Mitech, for Chiry, for UNT, for Krypton, for Longetivity, for Berlan and so on .
This kit fits all 17 26 series air cooled welding torches and 18 series water cooled torches,
For PTA-17 PTA-17V PTA-26 PTA-26V PTW-18 Tig Welding Torches,
For Miller Diamondback DB17 DB17V DB26 DB26V DB 18 tig welding torches
Specifications:
Optional Size: 10N22S 1.0mm 0.04",10N23S 1.6mm 1/16",10N24S 2.4mm 3/32",10N25S 3.2mm 1/8"
Color: Gold(As pictures show)
Quantity: 10
Package Contents:
10*Collets
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Short Collets Tig Welding Torch WP-17 WP-18 10N22S 10N23S 10N24S 10pcs/SET TOOL
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Short collets & short collet bodies allow use of a smaller WP9 ceramic cup on a WP-17 WP-18 or WP-26 tig torch.
This reduces the overall torch head length which gives you the ability to get into confined areas when welding,
Without having to change your tig torch.
Easy to use. Can be used of WP-17 WP-18 WP-26 TIG welding torch
The Brand of Machine would be for Rilon, for Riland, for Jasic, for Mitech, for Chiry, for UNT, for Krypton, for Longetivity, for Berlan and so on .
This kit fits all 17 26 series air cooled welding torches and 18 series water cooled torches,
For PTA-17 PTA-17V PTA-26 PTA-26V PTW-18 Tig Welding Torches,
For Miller Diamondback DB17 DB17V DB26 DB26V DB 18 tig welding torches
Specifications:
Optional Size: 10N22S 1.0mm 0.04",10N23S 1.6mm 1/16",10N24S 2.4mm 3/32",10N25S 3.2mm 1/8"
Color: Gold(As pictures show)
Quantity: 10
Package Contents:
10*Collets
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Short Collets Tig Welding Torch WP-17 WP-18 10N22S 10N23S 10N24S 10pcs/SET TOOL
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Short collets & short collet bodies allow use of a smaller WP9 ceramic cup on a WP-17 WP-18 or WP-26 tig torch.
This reduces the overall torch head length which gives you the ability to get into confined areas when welding,
Without having to change your tig torch.
Easy to use. Can be used of WP-17 WP-18 WP-26 TIG welding torch
The Brand of Machine would be for Rilon, for Riland, for Jasic, for Mitech, for Chiry, for UNT, for Krypton, for Longetivity, for Berlan and so on .
This kit fits all 17 26 series air cooled welding torches and 18 series water cooled torches,
For PTA-17 PTA-17V PTA-26 PTA-26V PTW-18 Tig Welding Torches,
For Miller Diamondback DB17 DB17V DB26 DB26V DB 18 tig welding torches
Specifications:
Optional Size: 10N22S 1.0mm 0.04",10N23S 1.6mm 1/16",10N24S 2.4mm 3/32",10N25S 3.2mm 1/8"
Color: Gold(As pictures show)
Quantity: 10
Package Contents:
10*Collets
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Short Collets Tig Welding Torch WP-17 WP-18 10N22S 10N23S 10N24S 10pcs/SET TOOL
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Short collets & short collet bodies allow use of a smaller WP9 ceramic cup on a WP-17 WP-18 or WP-26 tig torch.
This reduces the overall torch head length which gives you the ability to get into confined areas when welding,
Without having to change your tig torch.
Easy to use. Can be used of WP-17 WP-18 WP-26 TIG welding torch
The Brand of Machine would be for Rilon, for Riland, for Jasic, for Mitech, for Chiry, for UNT, for Krypton, for Longetivity, for Berlan and so on .
This kit fits all 17 26 series air cooled welding torches and 18 series water cooled torches,
For PTA-17 PTA-17V PTA-26 PTA-26V PTW-18 Tig Welding Torches,
For Miller Diamondback DB17 DB17V DB26 DB26V DB 18 tig welding torches
Specifications:
Optional Size: 10N22S 1.0mm 0.04",10N23S 1.6mm 1/16",10N24S 2.4mm 3/32",10N25S 3.2mm 1/8"
Color: Gold(As pictures show)
Quantity: 10
Package Contents:
10*Collets
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Item Details:
*100% Brand new and high quality
*High hardness: Made of durable high speed steel material, the hardness are greater than 60HRC
*Double-headed design: All damaged screw extractor are double-headed design, meet your need of removing damaged screw or bolts.
*This kit comes with case, provide a good protection for the screw extractor
*Easy to remove rust, broken screws
*Easy to use: Choose the right damaged screw extractor to fit your driver, Drill out, Flip Bit, Extract, done!
Specification:
*Dimension:88mm*62mm*18mm/3.46*2.44*0.71inches
*Weight: 85g
*Material: HSS
*Size:0# - Remove Diameter 2~3mm
1# Remove Diameter 3~5mm
2# Remove Diameter 4~8mm
3# Remove Diameter 4~8mm
4# Remove Diameter 5~10mm
5# Remove Diameter 6~12mm
Package Contents:
6*Damaged Screw Extractor
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Pack Of 6 Damaged Screw Extractor Drill Bits Tool Set Broken Bolt Remover HSS
Item Details:
*100% Brand new and high quality
*High hardness: Made of durable high speed steel material, the hardness are greater than 60HRC
*Double-headed design: All damaged screw extractor are double-headed design, meet your need of removing damaged screw or bolts.
*This kit comes with case, provide a good protection for the screw extractor
*Easy to remove rust, broken screws
*Easy to use: Choose the right damaged screw extractor to fit your driver, Drill out, Flip Bit, Extract, done!
Specification:
*Dimension:88mm*62mm*18mm/3.46*2.44*0.71inches
*Weight: 85g
*Material: HSS
*Size:0# - Remove Diameter 2~3mm
1# Remove Diameter 3~5mm
2# Remove Diameter 4~8mm
3# Remove Diameter 4~8mm
4# Remove Diameter 5~10mm
5# Remove Diameter 6~12mm
Package Contents:
6*Damaged Screw Extractor
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Center Drills Supplies High speed steel Milling 1/1.5/2.5/3.15mm Durable
Details:
*100% brand new and high quality
*Suit for: Hardness of metal for above 30 degrees
*Material: high speed steel
*Color: Silver (As Pictures Show)
*Angle: 60 degrees
*Quantity: 5 pcs
# 1, diameter 3mm, drill bit diameter 1mm
# 2, diameter 4mm, drill bit diameter 1.5mm
# 3, diameter 6mm, drill bit diameter 2.5mm
# 4, diameter 8mm, drill bit diameter 3.15mm
# 5, diameter 12mm, drill bit diameter 5mm (Approx.)
Package Contents:
5*Center Drills
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Industry Heatsink Aluminum Electrical Heat Sink LED Transistor IC Module Power
Product specification:
Material: Aluminum
Color: silver
Overall size: 100 * 35 * 10mm
Package Included:
4*100x35x10mm aluminum radiator
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Accessory Carbide Inserts Milling With Box Blade DCMT21.51 6*6*2.5mm Hot 2018
Description:
*10Pcs DCMT060204 US735 DCMT21.51 Insert Carbide Inserts.
*Mainly used for steel, stainless steel finishing and semi-finishing rough machining.
*Good precision high toughness, high hard, wear-resistant, strong shock resistance.
Features:
*Item Condition:100% Brand New
*Material:Carbide
*Color:Gold (As Pictures Show)
*Dimensions:6*6*2.5mm/0.24''x0.24''x0.1''(Approx.)
Package Contents
10pcs Carbide Inserts
1* Box
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow 1-2mm differences due to manual measurement.
3, This listing is for items listed above only, other accessories (if any) are not included.

1/2'' to 1/4'' Adapter For Impact Wrench Converter Accessory Practical
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*This drill chuck converter allows you to convert 1/2'' square female connector to 1/4'' hex female connector.
*It can convert air or power impact wrench into a drill , also can convert ratcheting wrench into a driver.
*This drill chuck converter allows you to convert a 1 / 2-inch square sleeve to a 1 / 4-inch hexagonal sleeve.
*You can turn an impact wrench or electric wrench into a drill bit, or you can turn a ratchet wrench into a controller.
*Suitable for 1/4 inch hexagon handle.
*Very suitable for mechanics, engineers, carpenters, etc.
*1/4 inch CRV socket wrench adapter, internally threaded chuck converter, hexagon handle wrench, 1/2 inch square to socket
Specifications:
*Material:Chrome vanadium steel.
*Color:As Pictures Show
*Type: 1/2 inch drive to 1/4 inch hex.
*Size:As pictures show
Package Contents:
1 * Adapter
1 * 100mm double-head cross screwdriver
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

CNC End Mill 2 Flute Ball Bit Radius Milling Cutter Carbide Newest Hot Sale
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Raw Material:Use Golden Egret GU25UF, high hardness and high toughness.
Coating:Use nano-tech,the hardness and thermal stability are up to 4000HV and 1200degree Celsius,respectively.
Double-edge design improves rigidity and surface finish effectively. Cutting edge over the center reduces the cutting resistance.
High capacity of junk slot benefits chip removal and increases machining efficiency.
2 flutes design is good for chip removal, easy for vertical feed processing, widely used in slot and hole processing.
Tolerance of End Mill Diameter:
1 ＜ D≤6 -0.010 ～ -0.030
6 ＜ D≤10 -0.015 ～ -0.040
10 ＜ D≤20 -0.020 ～ -0.050
Cutting Parameters:
Vc=130 (120-180)m/min
Ap=1/3D(1/8-1/2D)
Fz=0.15mm(0.02-0.2)
Application:
1.Suggest cutting HRC60 - 65 degrees within the steel material.
2.Suitable processing material: carbon steel, alloy steel, tool steel, hardened and tempered steel and steel parts hrc65-below.
Specifications:
End Type: Ball Nose End Mills
Material: Tungsten Steel
Coating: TiAIN
Flutes: 2 Flutes
Cutting Radius:0.75mm(Approx.)
Cutting Diameter: 1.5mm(Approx.)
Shank Diameter: 4mm(Approx.)
Flute Length:4mm(Approx.)
Overall Length: 50mm(Approx.)
Worked Material Hardness: HRC65
Warm Tips:
1. The bladed product is not use for people under 18 years.
2. The item is only use for industrial cutting not hazardous article.
Package Contents:
1*End Mill
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Twisted Hand drill Bits Black Chuck Workshop Slotting Parts Accessories
Details:
*100% brand new and high quality
*Sharp head design: Sharp head design provides a central point, high handness, faster with less effort
*Made by aluminum alloy, durable and sturdy, the precision pin vise can hold small drills, wires, reamers, hand drilling tool is useful for electronic assembling, tool-making, model making
*Mainly suitable for the materials of wood, resin, jewelry, walnut, amber, beeswax, olive nut, beads, PVC, acrylic and plastic, etc.
*Color: Black,Silver (As Pictures Show)
*Pin Vise Length (Approx.): 3.74inch(95 mm)
*Chuck Clamping Range (Approx.): 0.2 - 3.4 mm
*Drill Bits Size (Approx.): 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1mm, 1.2mm, 1.4mm, 1.6mm, 1.8mm, 2mm, 2.3mm, 2.5mm, 2.8mm, 3mm
*Hand drill with 30 pieces drill bits (Approx.): 0.5 mm x 3, 0.6 mm x 3, 0.7 mm x 3, 0.8 mm x 3, 0.9 mm x 3, 1.0 mm x 2, 1.2 mm x 2, 1.4 mm x 2, 1.4 mm x 2, 1.8 mm x 2, 2.0 mm x 1, 2.3 mm x 1, 2.5 mm x 1, 2.8 mm x 1, 3.0mm x 1, All 30pcs
Package Contents:
1*Hand Drill
30*Drill Bits
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Magnifying Glass Lens Welding Helmet Magnifier Screen 1.0-3.0 Industrial
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Used to replace the black glass lens on the welding cover, goggles, anti-glare, anti-ultraviolet;
*Applicable to operators who protect welding, arc welding and plasma cutting;
*It plays an important role in preventing electric eyes caused by arc and vitreous opacity.
*Material: Glass
*Lens Size: 5 * 4cm, 3mm (T)(Approx.)
*Optional Diopter: 1.00 / 1.50 / 2.00 / 2.50 / 3.00
Package Contents:
1 Box of Welding Magnifier
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Magnifying Glass Lens Welding Helmet Magnifier Screen 1.0-3.0 Industrial
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Used to replace the black glass lens on the welding cover, goggles, anti-glare, anti-ultraviolet;
*Applicable to operators who protect welding, arc welding and plasma cutting;
*It plays an important role in preventing electric eyes caused by arc and vitreous opacity.
*Material: Glass
*Lens Size: 5 * 4cm, 3mm (T)(Approx.)
*Optional Diopter: 1.00 / 1.50 / 2.00 / 2.50 / 3.00
Package Contents:
1 Box of Welding Magnifier
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Magnifying Glass Lens Welding Helmet Magnifier Screen 1.0-3.0 Industrial
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Used to replace the black glass lens on the welding cover, goggles, anti-glare, anti-ultraviolet;
*Applicable to operators who protect welding, arc welding and plasma cutting;
*It plays an important role in preventing electric eyes caused by arc and vitreous opacity.
*Material: Glass
*Lens Size: 5 * 4cm, 3mm (T)(Approx.)
*Optional Diopter: 1.00 / 1.50 / 2.00 / 2.50 / 3.00
Package Contents:
1 Box of Welding Magnifier
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Magnifying Glass Lens Welding Helmet Magnifier Screen 1.0-3.0 Industrial
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Used to replace the black glass lens on the welding cover, goggles, anti-glare, anti-ultraviolet;
*Applicable to operators who protect welding, arc welding and plasma cutting;
*It plays an important role in preventing electric eyes caused by arc and vitreous opacity.
*Material: Glass
*Lens Size: 5 * 4cm, 3mm (T)(Approx.)
*Optional Diopter: 1.00 / 1.50 / 2.00 / 2.50 / 3.00
Package Contents:
1 Box of Welding Magnifier
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Magnifying Glass Lens Welding Helmet Magnifier Screen 1.0-3.0 Industrial
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Used to replace the black glass lens on the welding cover, goggles, anti-glare, anti-ultraviolet;
*Applicable to operators who protect welding, arc welding and plasma cutting;
*It plays an important role in preventing electric eyes caused by arc and vitreous opacity.
*Material: Glass
*Lens Size: 5 * 4cm, 3mm (T)(Approx.)
*Optional Diopter: 1.00 / 1.50 / 2.00 / 2.50 / 3.00
Package Contents:
1 Box of Welding Magnifier
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Lathe Inserts 10Pcs YBC251 Carbide Holder DCMT070204 Stainless steel Useful
Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*10Pcs DCMT070204 YBC251 Carbide Inserts For Lathe Turning Tool Holder Boring Bar
*Suitable for: SDJCR/SDNCN/SDQCR Series Lathe Tool
*Imported technology, excellent workmanship, cost-effective
*High hardness, wear sturdy.Use of long-life
*Model: DCMT070204
*Insert Grade: YBC251
*Material: Carbide
*Usage: for stainless steel
*Color: As Pictures Show
Package Contents:
10*Carbide Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Product description:
100% brand new and high quality
Lightweight design
High-definition filters use high-quality LCD and multilayer optical interference filters.
This is a high-quality solar automatic dimming welding lens filter, with solar charging function and automatic on/off, very convenient and efficient.
It can automatically block and filter out bad light in the welding state.
You will be well protected from work and occupational diseases.
It fits all standard welding helmet windows.
Product parameters:
Material: ABS
Shade control: light status: DIN3
Dark state: DIN11 (10)
Dimensions (approximately): length (109 mm) width (52 mm) thickness (6 mm)
Power on/off: fully automatic
Note: Must be used together with automatic blackening welding helmet (cannot be used alone)
Package list:
1 x welding lens
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Plastic Protective Lens Cover Auto Darkening Welding PC 5pk Set Kit 5pcs
Details:
*100% brand new and high quality
*PC space lens is made of polycarbonate lens. PC is generally known as bullet-proof glass, so the PC lens adheres to the superior properties of the raw materials, with great impact resistance, and because of the high refractive index and light weight, greatly reduces the weight of the lens, there are more advantages .
*The lens for the PC material, the advantage is good transparency, impact resistance, light weight, especially for welding masks / welding masks / variable light masks PC external protection film / anti-impact surface screen / transparent PC surface / anti-riot helmet mask screen, turning over mirror welding glasses, welder will not stick welding slag, no metal steam. Compared to traditional glass lenses, significantly reduce transportation costs, the transportation process will not cause any damage
*Role: PC material, high temperature, welding spatter can prevent splash water from the damage caused by variable light filter, greatly extending the life of variable light filter. Remove the protective film on both sides before use
*Color: Blue (As Pictures Show)
*Size: 133*114mm(Approx.)
*Material: PC
Package Contents:
5*Protective Lens
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Directly Stencils Rework Heat 27Pcs Set Universal Reballing Latest New
Details:
Condition: 100% brand new
Material: Steel
Color: Silver (As Picture Show)
These stencils can be heated by the hot air machine, it is easy and quickly for reballing the BGA IC
Large set of common need in BGA working
Quantity: 27pcs/set
Set include:
1pc 1 universal stencil (P=1.5mm) 48mm*48mm
1pc 0.25 universal stencil (P=0.5mm) 35mm*35mm
2pcs 0.30 universal stencil (P=0.5mm) 30mm*30mm, 35mm*35mm
2pcs 0.35 universal stencil (P=0.6mm) 30mm*30mm, 35mm*35mm
1pc 0.40 universal stencil (P=0.78mm) 35mm*35mm
1pc 0.45 universal stencil (P=0.78mm) 35mm*35mm
3pcs 0.5 universal stencil (P=0.8mm) 31mm*31mm, 35mm*35mm, 0mm*40mm
1pc 0.55 universal stencil (P=1.0mm) 50mm*50mm
1pc 0.6 universal stencil (P=0.9mm) 45mm*45mm
1pc 0.6 universal stencil (P=1.1mm) 32mm*32mm
6pcs 0.6 universal stencil (P=1.0mm) 24mm*24mm, 27mm*27mm, 30mm*30mm, 33mm*33mm, 41mm*41mm, 45mm*45mm
1pc 0.65 universal stencil (P=1.1mm) 47mm*47mm
6pcs 0.76 universal stencil (P=1.27mm) 30mm*30mm, 33mm*33mm, 34mm*34mm, 37mm*37mm, 41mm*41mm, 55mm*55mm
Package Contents:
27 * Stencils
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

1.00-3.00 Magnifying Glass Lens Equipment Parts Welding Magnifier Welder Helmet
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Used to replace the black glass lens on the welding cover, goggles, anti-glare, anti-ultraviolet;
*Applicable to operators who protect welding, arc welding and plasma cutting;
*It plays an important role in preventing electric eyes caused by arc and vitreous opacity.
*Material: Glass
*Lens Size: 5 * 4cm, 3mm (T)(Approx.)
*Optional Diopter: 1.00 / 1.50 / 2.00 / 2.50 / 3.00
Package Contents:
1 Box of Welding Magnifier
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

1.00-3.00 Magnifying Glass Lens Equipment Parts Welding Magnifier Welder Helmet
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Used to replace the black glass lens on the welding cover, goggles, anti-glare, anti-ultraviolet;
*Applicable to operators who protect welding, arc welding and plasma cutting;
*It plays an important role in preventing electric eyes caused by arc and vitreous opacity.
*Material: Glass
*Lens Size: 5 * 4cm, 3mm (T)(Approx.)
*Optional Diopter: 1.00 / 1.50 / 2.00 / 2.50 / 3.00
Package Contents:
1 Box of Welding Magnifier
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

1.00-3.00 Magnifying Glass Lens Equipment Parts Welding Magnifier Welder Helmet
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Used to replace the black glass lens on the welding cover, goggles, anti-glare, anti-ultraviolet;
*Applicable to operators who protect welding, arc welding and plasma cutting;
*It plays an important role in preventing electric eyes caused by arc and vitreous opacity.
*Material: Glass
*Lens Size: 5 * 4cm, 3mm (T)(Approx.)
*Optional Diopter: 1.00 / 1.50 / 2.00 / 2.50 / 3.00
Package Contents:
1 Box of Welding Magnifier
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

1.00-3.00 Magnifying Glass Lens Equipment Parts Welding Magnifier Welder Helmet
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Used to replace the black glass lens on the welding cover, goggles, anti-glare, anti-ultraviolet;
*Applicable to operators who protect welding, arc welding and plasma cutting;
*It plays an important role in preventing electric eyes caused by arc and vitreous opacity.
*Material: Glass
*Lens Size: 5 * 4cm, 3mm (T)(Approx.)
*Optional Diopter: 1.00 / 1.50 / 2.00 / 2.50 / 3.00
Package Contents:
1 Box of Welding Magnifier
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

1.00-3.00 Magnifying Glass Lens Equipment Parts Welding Magnifier Welder Helmet
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Used to replace the black glass lens on the welding cover, goggles, anti-glare, anti-ultraviolet;
*Applicable to operators who protect welding, arc welding and plasma cutting;
*It plays an important role in preventing electric eyes caused by arc and vitreous opacity.
*Material: Glass
*Lens Size: 5 * 4cm, 3mm (T)(Approx.)
*Optional Diopter: 1.00 / 1.50 / 2.00 / 2.50 / 3.00
Package Contents:
1 Box of Welding Magnifier
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Directly Stencils Rework Heat 27Pcs Set Reballing Universal Tool Replaces
Details:
Condition: 100% brand new
Material: Steel
Color: Silver (As Picture Show)
These stencils can be heated by the hot air machine, it is easy and quickly for reballing the BGA IC
Large set of common need in BGA working
Quantity: 27pcs/set
Set include:
1pc 1 universal stencil (P=1.5mm) 48mm*48mm
1pc 0.25 universal stencil (P=0.5mm) 35mm*35mm
2pcs 0.30 universal stencil (P=0.5mm) 30mm*30mm, 35mm*35mm
2pcs 0.35 universal stencil (P=0.6mm) 30mm*30mm, 35mm*35mm
1pc 0.40 universal stencil (P=0.78mm) 35mm*35mm
1pc 0.45 universal stencil (P=0.78mm) 35mm*35mm
3pcs 0.5 universal stencil (P=0.8mm) 31mm*31mm, 35mm*35mm, 0mm*40mm
1pc 0.55 universal stencil (P=1.0mm) 50mm*50mm
1pc 0.6 universal stencil (P=0.9mm) 45mm*45mm
1pc 0.6 universal stencil (P=1.1mm) 32mm*32mm
6pcs 0.6 universal stencil (P=1.0mm) 24mm*24mm, 27mm*27mm, 30mm*30mm, 33mm*33mm, 41mm*41mm, 45mm*45mm
1pc 0.65 universal stencil (P=1.1mm) 47mm*47mm
6pcs 0.76 universal stencil (P=1.27mm) 30mm*30mm, 33mm*33mm, 34mm*34mm, 37mm*37mm, 41mm*41mm, 55mm*55mm
Package Contents:
27 * Stencils
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Finger Weld Monger Welding Glove Heat Shield Cover Protection Industrial Welder
Feature:
*100% brand new and high quality.
*High-temperature insulation, can work in the case of high temperatures.
*Durable in use. Fits for any TIG job. Increases the lifespan of your TIG glove.
*Compact size, easy to carry. Pocket size durable design ideal for any tig job.
*Closure design, better protect your fingers. Suitable for hobbyists and industrial welders.
*Soft texture, comfortable to wear. Breathable, flexible to work. Finish that long pass without burning your fingers.
*Suitable for hobbyists and industrial welders.
Specification:
*Material: Glass Fiber
*Color: Beige
*Length: approx. 150mm
Package Contents:
1*Finger Heat Shield
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Magnifying Glass Lens Welding Helmet Magnifier Screen Diopter Industrial
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Used to replace the black glass lens on the welding cover, goggles, anti-glare, anti-ultraviolet;
*Applicable to operators who protect welding, arc welding and plasma cutting;
*It plays an important role in preventing electric eyes caused by arc and vitreous opacity.
*Material: Glass
*Lens Size: 5 * 4cm, 3mm (T)(Approx.)
*Optional Diopter: 1.00 / 1.50 / 2.00 / 2.50 / 3.00
Package Contents:
1 Box of Welding Magnifier
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Magnifying Glass Lens Welding Helmet Magnifier Screen Diopter Industrial
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Used to replace the black glass lens on the welding cover, goggles, anti-glare, anti-ultraviolet;
*Applicable to operators who protect welding, arc welding and plasma cutting;
*It plays an important role in preventing electric eyes caused by arc and vitreous opacity.
*Material: Glass
*Lens Size: 5 * 4cm, 3mm (T)(Approx.)
*Optional Diopter: 1.00 / 1.50 / 2.00 / 2.50 / 3.00
Package Contents:
1 Box of Welding Magnifier
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.