Kategóriák

Feature:1. Practical pipe fittings, suitable for plumbing, hardware, gas, etc.
2. Reducing connector for connecting two male thread pipes of different sizes.
3. Female National Pipe Taper (NPT) threads on both ends for connecting male pipes.
4. High quality stainless steel material, strong and durable, not easy to corrode.
5. 1/2in NPT female to 1in NPT female pipe connector, easy to install and connect.
Specification:
Condition: 100% Brand New
Item Type: Threaded Connector
Material: Stainless Steel
Type: 1/2in NPT Female to 1in NPT Female
Connection Type: Thread
Scope of Application: Plumbing, hardware, gas
Medium: Gas, Water
Pressure: Normal Pressure 5kg
Female Thread Diameter: Approx. 32mm / 1.3in
Length: Approx. 42mm / 1.7in
Weight: Approx. 121g / 4.3oz
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Threaded Pipe Connector
Note:
1. Please allow 0‑2 cm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Features:100% brand new and high-quality.
It adopts 304 stainless steel and 316L material,very durable.
The premium reed switch of it is come from Japan and US,very reliable.
It can withstand 5Mpa at most which makes it can work at most environments.
It can work in AC 0-220V,and DC 0-200V which makes is suitable for most power source.
Specification:
Working voltage :0 ~ 220 (V)
Working current :0.5 A-1 (A)
Material :SUS304 & SUS316
Operating temperature:0 ~ 120 ℃
Maximum temperature tolerance: 120 (℃)
Working Pressure :1 (Mpa)
Maximum withstand voltage: 5 (Mpa)
Maximum power: low voltage: 10W
High voltage: 50W
Maximum switching current: low voltage: 0.5A
High voltage: 1.5A
Package List:
1*Liquid Level Sensor
Note:1. As different computers display colors differently, the color of the actual item may vary slightly from the above images.
2. Please allow 1-3mm differs due to manual measurement.
Attention:Floating ball is all stainless steel 304 material, clip spring is 316L material.
Low voltage refers to the floating ball switch can be used in 0-110V DC voltage circuit.
High voltage means floating ball switch can be used in AC 0 ~ 220V, DC 0 ~ 200V line.
High temperature is to point to float ball switch can long-term withstand temperature 120 degrees.
High temperature and high pressure is white silica gel high temperature line, low pressure is common line
Floating ball switch can not directly control solenoid valve or high-power relay, AC contactor and so on.Add a small relay to make the transition.
Floating ball travel 10mm, that is, the control range 10mm, if the control range can be large 2 combinations,1 long and 1 short installation.
Usage:
Products can be used in water dispensers, water heaters, solar energy, air conditioners, humidifiers, bathroom equipment, sales machines, fuel tanks, water towers, liquid level control of chemical liquids, kitchen equipment, water heaters and other water heating equipment anti-dry water level sensors. It has broad application prospects in automobiles, industrial equipment, agricultural equipment, and household appliances.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Feature:1. Separate buckle can provide greater flexibility and multiple mounting configurations.
2. It can be placed along the length of the rail (requires tee nut).
3. This accessory is compatible with V-Type slot and C-Beam linear rails.
4. It is a practical accessory for printer, you can rest assured to use.
5. Made of aluminum material. Exquisite workmanship, long product life.
Specification:
@font-face{ font-family:"Times New Roman"; } @font-face{ font-family:"宋体"; } @font-face{ font-family:"Calibri"; } p.MsoNormal{ mso-style-name:正文; mso-style-parent:""; margin:0pt; margin-bottom:.0001pt; mso-pagination:none; text-align:justify; text-justify:inter-ideograph; font-family:Calibri; mso-fareast-font-family:宋体; mso-bidi-font-family:'Times New Roman'; font-size:10.5000pt; mso-font-kerning:1.0000pt; } span.msoIns{ mso-style-type:export-only; mso-style-name:""; text-decoration:underline; text-underline:single; color:blue; } span.msoDel{ mso-style-type:export-only; mso-style-name:""; text-decoration:line-through; color:red; } @page{mso-page-border-surround-header:no; mso-page-border-surround-footer:no;}@page Section0{ } div.Section0{page:Section0;}
Item Type: Adjustable hinge for printer
Size: Approx. 20x20x27cm/0.8x0.8x1.1inch
Hole Location: mounting hole
Material: Aluminum
Color: Silver
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Living Hinge

The buccal tube is a metal tube welded to the side of the dental orthodontic band. It is designed with a small hook, which can be used to hang the rubber circle for intermaxillary traction.
Features:1. Made of premium material, rustproof, wear resistant and durable.
2. Smooth surface does not damage the oral mucosa.
3. The buccal hook is designed reasonably and does not stab the soft tissue of the mouth.
4. Applicable for 1st molar.
5. Effectively control the three-dimensional movement of teeth.
Specification:Material :Metal
Quantity: 4pcs
Roth: 0.022"
Package Weight: Approx.1g
Package List:1 * Bag of Buccal Tubes(4pcs)

Features:
Lower energy consumption, longer , improved physical robustness, smaller size, and faster switching.
There are total 200 pieces of LEDs in 10 types in this set which will meet you basic needs.
All LEDs are well packed and assorted in a transparent box for convenient storage.
Convenient for DIY and repair equipment and electrical appliances ofhome, office and industry.
This is a great assortment of LEDs for electronic professionals or enthusiasts.
Specifications:
Light Color & Lens Color:
Red&Red, Green&Green, Yellow&Yellow, Orange&Orange, Blue&Blue,
Red&Colorless, Green&Colorless, Yellow&Colorless, Orange&Colorless, Blue&Colorless
Quantity: 20pcs each type
Color
Size(mm)
Voltage(V)
Current(mA)
Red
5
1.8~2.3
20
Yellow
5
1.8~2.3
20
Green
5
2.8~3.6
20
Blue
5
2.8~3.6
20
White
5
2.8~3.6
20
Box Size: 13.2 x 6.8 x 2.3cm / 5.19 x 2.67 x 0.9"
Package Includes:
1 Box xLEDs
Note:LEDs are sorted manually, so there might be small mistakes on type and quantity. Thanks for your understanding.

Description:Brand new IC pick up pen for SMD work. High quality,easy to use and handle. Pen type design, comfortable to use. Anti-satic feature, suitable for current sensitive components. Rubber suction pad to fix it firmly and portect components from damaging.
Features:1. Built-in super small powerful vacuum pump, easy to use at any time.
2. Simple operation, provide strong and stable suction, especially suitable for continuous suction work.
3. Touch button with the required design, when using feel comfortable.
4. Anti-static design, suitable for handling current-sensitive components.
5. The suction pipe is provided with a pad fixing device to protect the suction pad from being punctured by the straw during operation. Meanwhile, it can also avoid damaging the components and ensure high quality suction efficiency.
Specifications:Condition: 100% Brand New
Material: Plastic
Color: Black
Size: Approx. Full length: 15 cm
Suction head: 3 cm
Weight: Approx. 31 g
Package Included:1 x 8918ESD Vacuum Suction Pen IC Absorber Kit
Notes:1.Please allow 1-3 cm error due to manual measurement. Thanks for your understanding.
2.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Descriptions:
The biggest advantage of this product is that the components adopt SMT patch technology, built-in ,anti-reverse connection, is a multi-purpose converter. The MOS tube and the rectifier tube adopt the new original installation to the safety and stability of the converter. The shell uses new aviation aluminum to heat the heat quickly. Decreasing board area, circuit board wiring is more reasonable, system work steadily.
Features:
This converter adapter features high inverter frequency, , small size, light weight, low energy consumption.
High efficiency, energy saving energy,with a strong adaptability, such as low temperature, high temperature, humidity, corrosion, dust, vibration, etc. environment .
Work steadily and with wide voltage.
The heat dissipation is faster and the load capacity is .
With reverse connection, overflows and short circuit protection, safe and reliable.
The range of anti-voltage fluctuation is wide, the ability is strong, the control is high.
The modular design of circuit structure are convenient for fast installation.
Specifications:
Input voltage: DC48V-120V
Output voltage: DC12V
Output current:≤15A
Output power: ≤150W, maximum output power:180W, continuous output power: 85 W
Output voltage waveform: square wave
Inverter efficiency: 90 (% )
Voltage adjustment rate: 0.5 (% )
Load adjustment rate: 1 (% )
Product size: as the picture
Application: Electric Scooter, horn, LED, hernia lamp, instrument panel, etc
Weight:300g
Package Included:
1 x Electric Scooter Converter Adapter
Note:
This converter adapter is suitable for electric vehicle with 2/3 wheels, not suitable for electric car with 4 wheels.

Features:
1. The pulley is made of high quality aluminum material: Durable and practical.
2. 2mm spacing: Designed for linear motors.
3. TThe GT2 pulley can be used with the GT2 belt: it is very convenient to use.
4. Cylinder shape: ensures smooth installation of the belt teeth.
5. 16 teeth in contact with the belt: Minimize the possibility of belt slippage.
6. This product is applicated to 3d printer and engraving machine.
Specification:
Belt:
Belt name: GT2
Length: Approx. 2m / 6.6ft ; 5m / 16.4ft (Optional)
Spacing: approx. 2mm / 0.1inch
Width: approx. 6mm / 0.2inch
Pulley:
Material: aluminum
Teeth: 16
Teeth spacing: approx. 2mm / 0.1inch
Teeth width: approx. 7mm / 0.3inch
Inner hole: approx. 5mm / 0.2inch
Package List:
1 * Timing belt
4 * Synchronous wheel

Junction Box Waterproof Underground Cable Line Protection Outdoor Terminal Case
Feature:1. This junction box is corrosion-resistant, anti-static, and has good insulation.
2. Manufactured from high-quality PC material, durable and practical.
3. With fixed column design, the terminal block can be fixed better.
4. The waterproof head is integrally formed with the waterproof box body, seamlessly docked, and the drip is leakproof.
5. Water and dustproof IP68 junction box, anti- sun protection and rain protection.
Specification:
Conditon: 100% Brand New
Item Type: Outdoor Junction Box
Material: PC
Color: As Pictures Shown
Rated Voltage: 450V
Joint Size: Approx. 110 x 48 x 35mm/4.3 x 1.9 x 1.4in
Adapter Cable: 4-9mm, 9-12mm, 12-15mm
Product Performance: Waterproof and dustproof grade IP68, anti- sun, fire retardant 94-V2
Application: Suitable for indoor and outdoor electrical, communication, firefighting equipment, molten steel, petrochemical, electronics, power, railway, mining, construction sites, airports, hotels, ships, unloading terminal equipment, sewage treatment plants, factories, etc.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x 2-Way Junction Box
1 x PA10 Terminal
1 x Screw Bag
4 x Sealing Rubber Ring

Features:
1. This switch can control your motor directly, no contactor required.
2. This switch is used to switch on/off circuit in electrical circuit of AC 220V or 380V.
3. Screw terminals, easy to wire.
4. Made of durable material, with long lifespan.
5. This switch has good insulation performance.
Specification:
Model: BS216B
Material: Plastic, Iron
Working Voltage: AC 110/220/380V
Working Current: 10A
Rated Thermal Current: 10A
Contact Resistance: 50Ω
Insulation Resistance: 50MΩ
3C Rated Voltage Range: ≥440V
Weight: Approx. 132g/4.6oz
Package List:
1 * On/Off Push Button Switch

Features:
This switch is momentary type, push it-- ON, Release -- OFF
Used for remote control in electromagnetic starter, contactor, relay and other electrical circuits
Screw fixation, strong installation, stable operation
Adopted of high quality flame retardant shell, high strength, high temperature resistance, corrosion resistance
Great switch for replacing the broken one.
Specification:
Product name: LED light reset button switch
Model: LA38-11D
Operation: push it-- on, Release -- off
Contact form: 1 NO 1 NC, 2 NO and 2 NC
Voltage: 220V
Working current: 10A
CTI: ≥100
Insulation resistance: ≥50MΩ
Contact resistance: ≤50mΩ
Mounting hole: 22mm/0.9in
Weight: Approx.57g/2oz
Package list:
1 x Momentary Switch
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

Features:
Made of high steel, this circular is quite durable.
Evenly arranged teeth are very which fast and fluent cutting.
Thin kerf, high wood utilization, less sawdust, enhance environmental protection and cost-effective.
Perfect for metal cutting, plastic cutting, circuit boards, laminates and DIY production.
May also be used on other materials including craft, carpentry, home, repairs, etc.
Specifications:
Condition: 100% Brand New
Material: High Steel
Color: As Picture Shown
Quantity: 5pcs Saw Blades(22,25,32,35,44) 1pc Extension Rod
Extension Rod Length: Approx. 5 cm / 1.97 inch
Extension Rod Shank Diameter: Approx. 3.175 mm / 0.125 inch
Extension Rod Arbor Diameter: Approx. 1.2 cm / 0.47 inch
Size
Middle Hole Diameter(Approx)
Cutting Disc Diameter(Approx)
Thickness(Approx)
Number of Teeth
22 0.6 mm/ 0.02 inch 22 mm / 0.87 inch
0.5 mm/ 0.02 inch
36
25 0.6 mm/ 0.02 inch 25 mm / 0.98 inch
0.6 mm/ 0.02 inch
36
32 0.6 mm/ 0.02 inch 32 mm / 1.26 inch
0.7 mm/0.03 inch
36
35
0.6 mm/ 0.02 inch 35 mm / 1.38 inch
0.7 mm/0.03 inch
36
44 0.6 mm/ 0.02 inch 44 mm / 1.73 inch
0.8 mm/0.03 inch
72
Weight: Approx. 52g
Package Includes:1 x Set of 5pcs Steel Circular Saw Blades
1 x Extension Rod
Note:Please allow slight deviation for the color and measurement. Thanks for your understanding.

Feature:1. The bearing is rated to withstand up to 6000 RPM revolving .
2. All components are manufactured and tested according to strict guidelines.
3. Made of durable steel, it is suitable for high wear applications.
4. Small and exquisite workmanship, the product has long product life.
5. It is a practical accessory for printer, you can rest assured to use.
Specification:
Item Type: Mini ball bearing for printer
Size: Approx. 5x10x4mm/0.2x0.39x0.16inch
Material: steel
Color: Silver
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:10 x Mini Ball Bearing 105zz

Descriptions:
This receptacle features 3 holes, NEMA L5-30R, 125V 30A, locking female plug. Great for connecting to a generator with a 125V volt outlet. Chemical- and impact-resistant housing, quick installation.
Features:
L5-30R is a NEMA configuration that sets standards for the electrical industry insuring interchangeability with other devices of the same designation.
Features 3 holes, NEMA L5-30R, 125V 30A, locking female plug.
Chemical- and impact-resistant housing, quick installation.
With long serving life, the number of pluggable is more than 20000 times.
Great for connecting to a generator with a 125V volt outlet.
With CUL certification.
Specifications:
Model: NEMA L5-30R
Type: US 3-hole power female plug
Rated voltage: 125V
Rated current: 30A
Power frequency: 50-60 (HZ)
Payload: 5 (KW)
Pluggable number: 20,000 (times)
Ambient temperature: - 25 ~ 50 ℃
Hole number: 3
Size: 93 x 43mm/ 3.66 x 1.69inch
Weight: 102g
Package included:
1 x US NEMA L5-30R female plug
Note:
It can be used in Europe and America, but it can't be used in Australia.

Features:
A simple socket board which is for NRF24L01 wireless module.
6 pin headers correspond to the SPI interface; from left to right: CE, CSN, SCK, MOSI, MISO, IRQ.
The operating voltage of the wireless module is generally 3.3V, while the ordinary 51 single-chip microcomputer is 5V.
This module is wireless module with 51 single-chip board used in conjunction.
High quality materials with good performance, stable and durable.
Specification:Type: Power Module
Power supply voltage: 3.3V
Power: Standard
Uses: Adapter plate
size: approx. 3 * 2cm / 1.18 * 0.79inch
Package list:10 * Wireless Module

Drilling Machine Caster Caster Waterproof Stone Machinery for Glass Machinery
Feature:1. The product is specially designed and thus has unique and beautiful appearance.
2. The caster is made of excellent materials, and thus is high-quality and durable.
3. This product is very practical, suitable for various machinery, drilling machines, etc.
4. The caster is characterized by the advantage of shaftless mute.
5. The product is perfect for glass machinery, stone machinery, woodworking machinery.
Specification:
Item Type: Waterproof caster.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Diameter: Approx. 36mm / 1.4in
Thickness: Approx. 17mm / 0.7in
Product Features: Mute without shaft
Adapter Screws: M8 screws and M10 screws
Color: Green, red
Level: Level 1
Maximum Load: 30kg
Uses: Glass machinery, stone machinery, woodworking machinery
Package List:1 x Waterproof Caster

Feature:1. Thinner wall in pen grip area, protect the child's young hands, so that the child can clearly feel the existence of the pen while mastering the correct posture, and does not affect the child's normal writing.
2. Cartoon design thumb positioning, easy to learn, let the handwriting more easier.
3. Made of soft silicone material, wear-resistant and no odor, soft and comfortable to grip.
4. Use with pen holder to correct grip posture, keep good handwriting habit from young age.
5. Through the simple and convenient method, learn to hold the pen with three fingers correctly, to reduce the condition of bending the head due to the incorrect posture of holding the pen, thus reducing the incidence of myopia.
Specification:
Condition: 100% Brand New
Item Type: Handwriting Grips
Material: Silicone
Optional Color: Blue, Pink
Quantity: 4pcs/box
Function: Let the child that holds pen to write at the beginning, through simple and convenient method, learn to hold pen with 3 fingers correctly, will reduce the condition of tilted or bow head caused by holding the pen incorrectly, reduce myopia incidence rate thereby.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:4 x Handwriting Grips

Features:1. 100% brand new and high quality.
2. Made of superior brass material, with delicate appearance and long durability.
3. Five sizes are available, you can choose according to your needs.
4. Easy and convenient to use.
5. Widely used in pipe connection, CNC machining, automatic lathe, injection molding machine, construction, instrument, etc.
Specification:Condition: 100% Brand New
Material: Brass
Color: Brass
Optional Size: Approx. 6mm / 0.24inch, 8mm / 0.31inch, 10mm / 0.39inch, 12mm / 0.47inch, 14mm / 0.55inch
Weight: Approx. 29-66g
Usage: Widely used in pipe connection, CNC machining, automatic lathe, injection molding machine, construction, instrument, etc.
Package List:2 * Brass Bulkhead Pipe Fitting

Features:
1. Made of high quality alloy steel, durable to use and not easy to broken.
2. High steel blade provides you the high cutting.
3. The of cutter has ball bearing, flexible and .
4. Small body, suitable for using in small space areas.
5. Great for the cutting of copper tubes, aluminium tubes.
Specification:
Condition: 100% Brand New
Model: CT-127A 3-16mm
Material: Alloy Steel
Weight: Approx. 109g / 3.8oz
Size: Approx. 5.1 * 3.5cm / 2.0 * 1.4in
Package List:
1 * Tube Cutter

Features:
Optical fiber sensor is a kind of sensor which changes the state of the measured object into measurable optical signal.
It has strong anti-interference ability, fine diameter, soft quality and light weight.
Insulation, non - inductive electrical properties, resistant to water, high temperature and corrosion.
Simple installation, easier circuit connection.
Higher detection performance, high reliability and stability.
Specification:
Model: FR - 610 - I
Induction mode: light sense
Outer diameter of optical fiber: 2.2mm
Internal diameter of optical fiber: 1.0mm
Probe thread specification: M6
Line length: 1m
Sensor head convex tube length: 10mm / 0.4in
Package List
1* Reflective Fiber Optic Sensor
2* Nut
2* Gasket

Features:
It is suitable for pure water machine, water dispenser, washing machine and so on
This electric solenoid valve is N/C normally type
This is a water inlet valve, connector way is quick insert type
The electric solenoid valve is made of high quality plastic and brass material, with long serving life
Easy to install and a great replacement of the broken one
Specification:
Type: NC/normally
Connector: 6.3mm(Outer diameter), 4.5mm(inner diameter)
Rated voltage: 12V
Size: 6*5.2cm/2.4*2.1in
Weight: Approx.94g/3.3oz
Package list:
1 x Solenoid Water Valve

Feature:The product is made of high-quality electronic components with stable and reliable performance.
Motor speed controller supports switching and forward and reverse functions, making it more flexible and convenient to use.
This is a DC motor controller. Please don't use it on AC motors.
The product is compact and easy to install in narrow space.
The input voltage of the product is within the range of DC 6-28V and the applicable current is within 3A.
Specification:Item: 3A PWM Motor Speed Controller
Material: Aluminum
Voltage: DC 6-28V
Package list:1 * Motor Speed Controller
Note:DC motor governor connected with DC power supply, must not be directly connected to 220V AC.
The motor can be connected without any positive or negative. When the running direction is inconsistent with the expectation, the direction can be changed by adjusting the line sequence.
The actual product color may deviate from the photo due to light.
There may be a slight deviation in the measurement of product.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:2pcs high quality LED Decoder Wirewound Load Resistors.
Clear OBC and CAN bus warning errors on the instrument panel while installing LED bulbs.
Solve the hyper flash/blink problem of installing LED bulbs and LED indicators.
Premium plastic and metal material, large resistance, long service life.
Easy to install, plug and play without making wiring modification.
Perfectly suitable for car LED bulbs of headlights, fog lights, or daytime running lights.
Specifications:Condition: Brand New
Material: Metal plastic
Color: Shown as picture
Power: 10W
Resistance: 39Ω
Package Weight: Approx.25g/0.9oz
Package List:2 * LED Decoders
1 * Acceesory Set
Note:The load resistor will become very hot in use. Please carefully install. Don't put them near anything that might melt, such as wires, plastics, etc. Thanks!
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Feature:1. Compressed by high quality aluminum machine tool, it has good thermal conductivity
2. The heat sink can reduce the danger of hardware failure due to overheating
3. Professional design maximizes area in contact with cooling air
4. Light weight, can be applied to products that are more lightweight
5. Fit for 1/2/3 generation, set-top box, LED, player, router, security, CPU, north and south bridge chip, IC , MOS module, triode, power supply, electron tube, power board, Memory, electrical appliances, electronic components, heat sinks, etc.
Specification:
Item Type: Heat Sink
Model: P43*40*36
Size: Approx. 43 x 40 x 36mm / 1.7 x 1.6 x 1.4in
Color: Gold
Material: 6063-T5 extruded high quality aluminum profiles
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Heat Sink

Specifications:16 Teeth
Bore: 5mm fit for most NEMA 17 Stepper motors
Fit for 6mm wide GT2 timing belt
Pulley material: Aluminum
Note: This listing is just for 5pcs aluminum timing belt pulley, others not includes
Package included:5 x GT2 16 Teeth 5mm Bore Aluminum Timing Belt Pulley For 3D Printer CNC .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Feature:1. It can be used for clamping, winding, bending and cutting wires and cables.
2. Made of high hardness carbon steel, it is durable, wear-resistant and corrosion-resistant.
3. High mini nipper pliers, comfortable non slip grip, more labor-saving.
4. Light in weight, simple operation, is the perfect tool for watch repairman.
5. Very suitable for watch repair, jewelry processing, fishing, gardening and electronic industry repair.
Specification:
Condition: 100% Brand New
Item Type: Pliers
Material: Carbon Steel
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:2 x Pliers

Feature:1. for cutting all kinds of metals such as thin iron, thin copper, thin aluminum.
2. The cutting discs are made of hard abrasive, with cutting edges in good shape.
3. Easily cut bolts or screws, durable, safe and efficient to use.
4. Slot on rusty or peeling bolts and screws to remove with a screwdriver.
5. Work well with electric grinder rotary tool.
Specification:
Condition: Brand New
Item Type: Rotary Tool Accessory
Quantity: 76pcs
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:
70 x Cutting Polishing Disc
4 x Drill Bit
2 x Connecting Rod

Features:
1. 100% brand new and high quality.
2. This is a DC 12V diaphragm pump with good performance.
3. Small body and long service life, it is a good part for choice.
4. The maximum suction range can be up to 2m.
5. Suitable for tea machine, water cooling, fish tank, etc.
Specification:
Condition: 100% Brand New
Working Voltage: 12V
Working Current: 0.5-0.7A
Flow: 1.5-2L/min (approx.)
Maximum Suction Range: 2m
Maximum Hydraulic Head: 3m
Life: 2500h(maximum)
Water Temperature: 80℃
Weight: Approx. 110g / 3.9oz
Size: Approx. 10 * 6 * 3.5cm / 3.9 * 2.4 * 1.4in
Package List:
1 * Pump
Note:
There is silicone cover in the back of the pump, do not cover the motor's cooling hole to avoid affecting the heat dissipation and service life.

These sanding discs have special , durable alumina grains that give you a fast and exceptionally long-lasting polishing. Professional, safety, high efficiency and low consumption. A great choice for you.
Features:
Made of alumina, strong polishing force, high wear-resisting degree and cost performance.
Can work with polishing backing pad, simple and easy to use.
Professional, safety, high efficiency and low consumption.
Improved abrasion performance, abrasive will not easily fall off.
Used in furniture, hardware and automobile repairing. For surface polishing of iron, paint, electronics, wood furniture and many kinds of wood plank.
Specification:Condition: 100% Brand New
Item Type: Sanding Discs
Material: Alumina
Granularity: 1000#, 1500#, 2000#, 3000# (Each For 5PCS)
Size: Approx. 127.0mm / 5.0inch
Weight: Approx. 82g /2.9oz
Package List:20 * Sanding Discs

When repairing the LCD and notebook, if you only see a little shadow or high voltage protection when you the screen, it is difficult to judge whether the or the high voltage board is faulty! With this set of tools, it is easy to determine the fault! The kit comes with a connection cable so that it can be easily tested whether the LCD port is large or small!
Features:1. This kit is directly connected to the monitor's 12V/1A-4A power supply, which can simultaneously illuminate two lamps below 15 inches.
2. Whether it is testing the LCD screen or the tube without solder leads, it is very convenient.
3. It also can be used for lighting billboard or advertising signs by CCFL lamps.
4. The kit comes with a patch cord so that it can be easily tested whether the LCD port is large or small!
5. It is really a good tool for testing LCD lamps.
Specification:Material: ABS
Color: White
Input voltage: 12V
Suitable for: CCFL, LED backlight display
Size: 65 * 25 * 20 mm / 2.6 * 1.0 * 0.8in
Weight: Approx. 43g
Package List:1 * Tester
2 * Connection Cable

Features:
The rotation direction of the motor is programmable: normal, reverse or two-way.
All parameters can be programmed via program card or sender, including default settings.
Multiple protection includes low voltage protection/overheat protection/throttling protection.
Alarm function makes it easier to search the drone.
Throttle ranges can be configured and is compatible with all receivers, providing , linear and accurate throttle response.
Specification:
Material:
Options: 12A, 20A
Color: Shown As Pictures
Total Weight: 21 - 36g
Type: RC Model Part & Acces
12A ESC Specification:Continuous Current: 12A
Brust Current: 15A
BEC Output: 1A 5V
Suitable Battery: 2-4s
Size: Approx. 42 * 20 * 8mm / 1.65 * 0.79 * 0.31inch
Program: BLHeli
20A ESC Specification:Continuous Current: 20A
Brust Current: 25A
Suitable Battery: 2-4S
Size: Approx. 52 * 26 * 7mm / 2.05 * 1.02 * 0.28inch
BEC Output: 2A 5V
Program: BLHeli
Package List:1 * ESC
1 * Manual

Feature:1. Convenient to use ,applicable to outdoors uses.
2. The barb hose connector is made of brass,resistant to rust and corrosions.
3. Can be used for oil,water and gas,wider application.
4. Professional and practical design with beautiful appearance.
5. Delicate and practical, high hardness, firm and strong.
Specification:
Item Type:Barb Connector
Material:Brass
Thread:Male G1/2 to 10mm
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:5 x Connector

Description:
Made of quality materials, this tally is durable for years. It's portable and lightweight, easy to take with. It's -engineered to the precise count. This counter offers a 4-figure register, ranges from 0000 to 9999, and the white number is clear on the black background. With no battery, it's powered by your hand, and it's easy to reset. This tally is for sports competition, attendance at a meeting, goods counting in a supermarket, etc. It works well just as you expect.
Features:
Made of good material, durable and lightweight.
With a , it can be attached to backpacks or hold in hand.
-engineered, precise count.
Offers a 4-figure register, counts to 9,999.
No battery needed, and easy to reset.
Specification:
Material: Metal Plastic
Color: Silver
Diameter: approx. 5.6cm / 2.2in
Height: approx. 6cm / 2.4in
Weight: approx. 57g
Package List:
1 x Hand Tally Only

Feature:1. Compact button switch can support more stable use, which adopts DIP packaging technology.
2. Keeps longer service life, such DIP button switch keeps quality assurance, easy to use.
3. Made of engineering plastic materials, button switch's high quality makes itself getting great popularity.
4. With exquisite craftsmanship, light and practical switch keeps high practical adoptability and it is durable.
5. And momentary tactile button switch's quality is guaranteed, you can use it with confidence.
Specification:
Item Type: Momentary tactile button switch
Material: Engineering plastic
Package Type: DIP
Rated Voltage: DC12V
Rated Current: 50mA
Quantity: 100PCs
Size: Approx. 6 x 6 x 12mm / 0.2 x 0.2 x 0.5in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:100 x Momentary Tactile Button Switch

Features:1. 100% brand new and high quality.
2. When the pressure in the equipment or pipeline exceeds the allowable value, the valve will automatically open and then discharge in full.
3. When the pressure is low to the specified value, the valve will automatically close to the safe operation of the equipment.
4. Suitable for a variety of steam generators or electric boilers, coal-fired boilers and so on.
5. Standard G3/8 thread port for easy installation.
Specification:Condition: 100% Brand New
Optional Pressure: 2KG, 3KG, 5KG
Thread port: G3/8
Weight: Approx. 60g / 2.1oz
Package list:1 * Safety Release Valve

The shape designed allows this cutter to easily plunge cuts into the material at any spot without damaging opposing or surfaces. It is designed with universal fitting for use on many major brands of oscillating tools.
Features:
1. saw teeth cut quickly and smoothly, not easy to break.
2. Forged by high carbon steel, through fine processing, with high strength and long service life.
3. Mainly used for cutting soft metal, wood, plastic or opening hole.
4. Universal saw blade for most brands of oscillating power tools.
5. There are totally 3pcs saw blades, convenient to replace the broken or useless one.
Specification:
Condition: 100% brand new
Material: High carbon steel
Quantity: 3pcs
Color:
Weight: Approx. 81g/2.8oz
Package List:
1 * 10mm Saw Blade
1 * 20mm Saw Blade
1 * 34mm Saw Blade
Note: Please allow slight error due to manual measurement. Thanks for your understanding.

Metal Manual Counter 4 Digit Silver Bead Aluminum Alloy Plated 0-9999 Click
Feature:1. Metal case with beautiful appearance, small body, comfortable to hold
2. Easy to use and carry, can be cleared
3. Large counting, the record can be up to 9999 times
4. Fine workmanship and long service life
5. Widely used in various data statistics, conference attendance and traffic flowing, etc.
Specification:
Item Type: Hand Tally Counter
Brand: BERM
Color: Silver
Type: With hook (metal knob reset)
Material: Aluminium Alloy
Counting Range: 0-9999 (4-digits)
Diameter: Approx. 46mm / 1.8in
Thickness: Approx. 30mm / 1.2in
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Hand Tally Counter

Feature:1. Made of high-strength steel, copper-plated, high hardness.
2. High strength (8 grade) and high temperature resistance.
3. Suitable for exhaust system applications including exhaust manifold and exhaust flange piping.
4. The nuts have a self-locking that stops when they are manually attached to the stud and the 'locked' portion.
5. Stable performance, strict compliance with standard requirements.
Specification:
Condition: 100% Brand New
Item Type: Nut
Color: Shown as Picture
Material: Steel Copper: Approx. 42mm/1.65in
Stud Pitch: M10x1.5
Nut Pitch: M10x1.5
Nut Height: Approx. 10mm/0.39in
Flange Diameter: Approx. 17.6mm/0.69
Package List:
2 x Nuts
2 x

Feature:1. High transparency, high adhesion, can be used for packaging, thermoplastic, sealing.
2. Anti static, suitable for pasting electrostatic sensitive devices, electronic passive components, etc.
3. Made of high quality polypropylene material, good chemical resistance, high temperature resistance, easy to remove.
4. Can be used in circuit board, notebook computer, mobile phone communication and other external packaging of anti-static products and dust-free room.
5. Applicable to paste electrostatic sensitive devices, sealing packaging bags and other electronic products.
Specification:
Condition: 100% Brand New
Item Type: Tape
Material: Polypropylene
Color: Black
Long-Term Temperature Resistance: 80℃
Temperature Range: 0℃-80℃
Product Size:
Width: Approx. 25mm / 1.0in
Length: Approx. 33m / 108.3ft
Application: For packaging, thermoplastic, composite, sealing
Uses: Suitable for pasting electrostatic sensitive devices, electronic passive component processing offices, rooms, workstations
Application: Used for external packaging of anti-static products and room use for circuit boards, laptops, mobile phones, etc. It can also be used to paste static sensitive devices, packaging bag seals and other electronic product packaging.
Package List:1 x Anti-Static Tape
Note:
1.Please allow 0-1 inch error due to manual measurement. Thanks for your understanding.
2.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Features:
This pressure gauge is 42mm dial plate, double scale for bar/psi measurement.
Clear number markings for convenient and easy readings.
Made of metal outer case, providing good protection for internal parts.
Small size, convenient to carry.
This pressure gauge is a great pressure measuring tool with stable performance.
Specifications:
Material: Metal
Measuring range: 0-200psi / 0-14bar
Dial Plate Diameter: 42mm/1.65inch
Connection: 1/8" NPT Thread
Weight: 52 g
Package Included:
1 x Water Pressure Gauge

Features:
Made of quality aluminum, stable and durable.
Compact and convenient to use.
The thread size is standard 1/4in, easy to install.
It can help quickly release the air in pipe.
Wide application in our daily life.
Specification:Condition: 100% Brand New
Material: Aluminum
Color: Shown as pictures
Medium: Air
Thread Size: 1/4"BSPT
Operating pressure: 0 to 10kgf/cm²
Working Temperature: 0 to 70 Degrees Celsius
Flow Direction: one-way: Approx. 56 * 42 * 33mm / 2.2 * 1.6 * 1.3in
Weight: Approx. 79g
Packing List:1 x Air Valve

Features:
Works well on metal and non-metallic materials of various complex surface rust, paint, deburring, solder joints sanding and polishing.
Widely used for artificial stone, furniture, wood products, metals, automobiles grinding and polishing, etc.
The utility model has the advantages of convenient use, simple operation and low cost.
Terrific for general polishing and has the ability to work with semi-rough finishes to refine them to a luster.
Can be used with a polishing compound to produce a finish.
Specification:Material: Alumina
Weight: 43g
Diameter: 25mm/1inch
Shape: Round
Shank Diameter: 1/8"
Quantity: 100pcs
Color: As pictures shown
Model: 100P, 180P, 240P, 1500P, 3000P
Package Includes:20 x 100 Grit Sanding Paper
20 x 180 Grit Sanding Paper
20 x 240 Grit Sanding Paper
20 x 1500 Grit Sanding Paper
20 x 3000 Grit Sanding Paper
1 X Loop Sanding Pad
Note:1. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Feature:1. The diagonal plier body is forged with high‑quality high‑carbon steel, which is strong and durable.
2. Jaws are subjected to special high‑frequency heat treatment to cut in the of sharpness way.
3. And two‑color non‑slip handle helps such plier easy to use, which also makes itself getting great popularity.
4. Meanwhile, tail has a rebound design, which is more convenient to operate, save time and effort to improve efficiency.
5. Supports wide application, such plier's applicable objects include plastic, soft iron wire and soft copper wire.
Specification:
Item Type: Diagonal plier
Material: High carbon steel
Model: TU-501S5 inch
Color: Yellow black
Applicable Objects: Plastic, soft iron wire and soft copper wire
Size: Approx. 12.7cm / 5-inch
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Diagonal Plier
Note:
This is a non‑insulated tool, please unplug power supply before use. There will be pulverized material splashing during operation, please be careful. Do not cut off hard objects such as piano wires and thin steel bars that are overloaded. Please do not use the tip or the blade to pry the object and do not touch it directly.

Features:
1. 100% brand new and high quality.
2. Made of copper material, more durable in use.
3. The combination of 4 different specifications makes it more practical to use.
4. The wire is flexible to change shape, so that it has a wide-range in application.
5. Great welding rods for jewelry making.
Specification:
Condition: 100% Brand New
Material: Copper
Color: As Pictures Shown
Diameter: 0.5mm, 0.7mm, 1.0mm, 1.5mm
Package List:
4 * Welding Rods

Description:
Miniature flanged ball bearings are available ball bearings of quite small size. These miniature ball bearings have a 4mm inner diameter, a 9mm outer diameter, a 4mm thickness and a 10.3mm flange. Ball bearings of this size are for precision work and applications that require a lot of functional mechanical parts in a small space, such as printer, quadcopter or model.
Features:
These miniature bearings are made of high quality bearing steel for low noise and long service life.
They are double shielded to avoid contaminants entering and save lubricant.
Bearings have a 4mm inner diameter, a 9mm outer diameter, a 4mm thickness and a 10.3mm flange.
These are great for small hobby 4mm shaft/rod projects such as printer, quadcopter or ship model.
There comes total 10 pieces miniature bearings which you may use for many different projects.
Specifications:
Material: Bearing steel
Inner Diameter: 4mm / 0.15"
Outer Diameter: 9mm / 0.35"
Thickness: 4mm / 0.15"
Flange Diameter: 10.3mm / 0.4"
Quantity: 10pcs
Package Includes:
10 x Bearings
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:
Made of high quality stainless steel, which is durable, anti-rust and comfortable to use.
With vernier design for exact inside and outside measurements.
100mm stainless steel caliber vernier, to measure the size of the teeth.
Scale capacity from 0.1mm to 100.0mm, marked in increments of 0.1mm.
Popular tool for dental use, jewelry, hobby and store.
An ultra and effortless operation measuring tool.
Specification:Item Type: Vernier Caliper
Material: Stainless Steel
Color: Silver
Applicable crowd: Adult
Gross Weight: 38 g
Package Include:1 * Vernier Caliper

Networks Mounted 4pcs Desktop Information Box Convenient Work Area Home
Feature:1. Flexible corner designed, built-in screws, which has stylish and generous appearance.
2. Used for connecting the communication socket between the equipment and the work area.
3. The RJ45 is connected to a jumper, and the IDC terminal is connected to horizontal wiring.
4. Manufactured according to the international standard ISO/IEC11801, TIA/EIA568.
5. IDC card wire material is phosphor bronze, suitable for 22-24AWG cable, 250 pluggable durability.
6. Single port, wide application, a clean and simple solution for networks expansion.
Specification:
Condition: 100% Brand New
Item Type: Desktop Information Box
Material: ABS
Color: As picture shown
Specification: RJ45-8P8C
Process: Machining
Number of Interfaces: Single Port
Scope of Application: Networks Wiring
IDC card wire material is phosphor bronze, suitable for 22-24AWG cable, 250 pluggable durability.
Test transmission performance at 100MHZ.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
4 x Desktop Information Box
4 x Douable-Sided Tape
8 x Screw

Features:
These miniature bearings are made of high quality bearing steel for low noise and long service life.
They are double shielded to avoid contaminants entering and save lubricant.
Bearings have 9mm inner diameter, 20mm outer diameter and 6mm thickness.
These are great for small hobby 9mm shaft/rod projects.
There comes total 10 pieces miniature bearings which you may use for many different projects.
Specification:
Model: 699ZZ
Inner Diameter: 9mm / 0.4in
Outer Diameter: 20mm / 0.8in
Thickness: 6mm / 0.2in
Property: High speed
Application: Universal
Rolling : Single row balls
Race Type: Deep race
Material: Bearing steel
Angle: 15 degree
Sealing: Double-shielded
Weight: 83g / 2.9oz (approx.)
Package list:10 * Bearings

Features:
1. 100% brand new an high quality.
2. With high pressure resistance, not easy to fall off.
3. Die casting connector with high quality copper materials, strong and durable.
4. Pneumatic connector, easy and quick to install.
5. M5 threads, compact and precise,.
Specifications:
Quantity: 20pcs
Color: silver
Thread: M5 4mm
Pressure Resistance: 0-1.6MPa
Length: 16mm/0.63in
Weight: Approx. 64g
Package Includes:
20 x Pneumatic Male Connector
Note:
1. Due to the difference between the monitors and light effect, the picture may not reflect the actual color of the item.
2. Please allow small deviation due to manual measurement. Thanks for your understanding.

1 Piece 1/4 Shank Straight T Slot Router Bit Woodworking Engraving Tools
Features:
1. Made of high quality cemented carbide material, durable and long service life
2. The is coating, compact appearance and it has stable performance.
3. The blade is of sharpness and smooth to cut, no burr and no edges.
4. High abrasion resistance and high-accuracy grinding technology, chip removal is more smoothly.
5. Suitable for MDF, solid wood, particleboard and plywood, etc.
Specification:
Condition: 100% Brand New
Model: 1/4 Shank T Slot Router Bit
Material: Cemented Carbide
Whether Coating: Yes
Shank Diameter: 1/4"（mm）
Whole Length: 2-3/8"(mm)
Blade Length: 5/16"(mm), 15/32"(mm)
Cutting Depth: 11/32"(mm)
Blade Head Diameter: 1-1/16"(mm)
Package List:
1Pcs T Slot Router Bit