Kategóriák

Collet Chuck Holder MT2ER25 MT2ER32 Tooling Accessories MT2ER11 Durable
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*MT2 ER11 / ER16 / ER20 / ER25 / ER32 spring collet Morse milling tool holder
*Optional Types: MT2ER11, MT2ER16, MT2ER20, MT2ER25, MT2ER32
*Color: As pictures show
*Quantity: 1
Package Contents:
1*Chuck Holder
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Collet Chuck Holder MT2ER25 MT2ER32 Tooling Accessories MT2ER11 Durable
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*MT2 ER11 / ER16 / ER20 / ER25 / ER32 spring collet Morse milling tool holder
*Optional Types: MT2ER11, MT2ER16, MT2ER20, MT2ER25, MT2ER32
*Color: As pictures show
*Quantity: 1
Package Contents:
1*Chuck Holder
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Step Cone Drill Bit Hex Shank Hole Cutter Drilling Stainless Steel Iron Plate
Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*It is suitable to be installed on the drill tool and bench drill, applicable for drilling on these most difficult parts, such as stainless steel, carbon steel, aluminum plate, iron plate, etc.
*Made from HSS-Co, heat treatment for it, high hardness, high wear resistance, high hardness, high flexural strength, sharp edge, the best option for processing stainless steel, better than normal drill bit
*Material: HSS Co (M35)
*Identifier type: Hex shank
*Shank diameter (Approx.): 1/4 "(6.35mm)
*Steps: 10 steps
*Shank length: 31mm (Approx.)
*Side length: 57mm (Approx.)
*Diameter pitch: 6/8/10/12/14/16/18/20/22 / 24mm (Approx.)
*Color: As Pictures Show
Package Contents:
1*Hex shank step drill
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Thread Tap Die Gewindebohrer Und Matrizensatz 5/8 "-27 Right Hand Portable New
Item Details:
*100% Brand new and high quality
*High speed steel (HSS) provides good wear-resistance and can be used in general purpose applications for both ferrous and non-ferrous materials
*Provides a smooth, polished finish on the tool
Specifications:
*Model: 5/8"-27
*Thread diameter (D): 5/8" or 0.625in or 15.875mm
*Threads per inch (TPI): 27
*Pitch (P): 0.941 mm
*Thread type: uniform special thread (UNS)
*Cutting direction: Right Hand
*Outer diameter: 38 mm
*Carbide tool steel
*Material: High speed steel
Package Contents:
1*Right hand thread tap and die set 5/8'' - 27 TPI
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Thread Tap Die Gewindebohrer Und Matrizensatz Zubehör Handtool Neuesten
Item Details:
*100% Brand new and high quality
*High speed steel (HSS) provides good wear-resistance and can be used in general purpose applications for both ferrous and non-ferrous materials
*Provides a smooth, polished finish on the tool
Specifications:
*Model: 5/8"-27
*Thread diameter (D): 5/8" or 0.625in or 15.875mm
*Threads per inch (TPI): 27
*Pitch (P): 0.941 mm
*Thread type: uniform special thread (UNS)
*Cutting direction: Right Hand
*Outer diameter: 38 mm
*Carbide tool steel
*Material: High speed steel
Package Contents:
1*Right hand thread tap and die set 5/8'' - 27 TPI
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

End Mill CNC Milling Cutter 4*50mm Tungsten Carbide 6mm Shank Practical
Feature:
*100% brand new and high quality
*Use of new ultra-fine fine tungsten steel bar grinding, high rigidity and toughness.
*Use of excellent new blade shape, the surface is smooth, not easy to collapse, to enhance the rigidity of the tool, taking into account the rigidity of the tool and chip removal performance,
Making the cutting tool and chip more stable.
*Round handle, chamfering, easy to use, increase the stability of the performance.
*Tough and wear-resistant.
*High strength and hardness.
*Durable in use
Specification:
*Type: milling tools
*Material: tungsten steel
*Color: as shown in picture
*Overall Length: 50mm(Approx.)
Worked Material Hardness: HRC45-50
*Flutes: 4 Flutes
*Blade length: 10mm(Approx.)
*Cutting Diameter: 4mm(Approx.)
*Shank diameter: approx. 6mm
*Quantity: 8pcs
Package Contents:
8* 4 Flute End Mill Cutters
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

End Mill CNC Milling Cutter Tungsten Carbide 6mm Shank Milling tools Hot sale
Feature:
*100% brand new and high quality
*Use of new ultra-fine fine tungsten steel bar grinding, high rigidity and toughness.
*Use of excellent new blade shape, the surface is smooth, not easy to collapse, to enhance the rigidity of the tool, taking into account the rigidity of the tool and chip removal performance,
Making the cutting tool and chip more stable.
*Round handle, chamfering, easy to use, increase the stability of the performance.
*Tough and wear-resistant.
*High strength and hardness.
*Durable in use
Specification:
*Type: milling tools
*Material: tungsten steel
*Color: as shown in picture
*Overall Length: 50mm(Approx.)
Worked Material Hardness: HRC45-50
*Flutes: 4 Flutes
*Blade length: 10mm(Approx.)
*Cutting Diameter: 4mm(Approx.)
*Shank diameter: approx. 6mm
*Quantity: 8pcs
Package Contents:
8* 4 Flute End Mill Cutters
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Cone Cutters End mills Equipment Drill Tools R0.5*D6*30.5*75L 2-Flutes
Details:
*100% brand new and high quality
*Quality tungsten steel alloy taper Taper ball end mill
*Tapered Ball Nose End Mill / Cone Cutters
*More durable
*Model: R0.5 * D6 * 30.5 * 75L
*Material: tungsten steel
*Surface processing: Coating
*Flutes: 2 Flutes
*Radius: 0.5mm (0.020 ")
*Shank Diameter: 6mm (0.24 ")
*Cutting Length: 30.5mm (1.2 ")
*Overall Length: 75mm (2.96 ")
*Single Side angle: About B = 4.68 °
*Worked material HRC: 0 ~ 55 °
*Suitable processing: hardwood pieces of iron and other steel parts
Package Contents:
1*2-Flute End Mill
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

End mills Handtool Equipment Drill Bit Tools R0.5*D6*30.5*75L 2-Flutes
Details:
*100% brand new and high quality
*Quality tungsten steel alloy taper Taper ball end mill
*Tapered Ball Nose End Mill / Cone Cutters
*More durable
*Model: R0.5 * D6 * 30.5 * 75L
*Material: tungsten steel
*Surface processing: Coating
*Flutes: 2 Flutes
*Radius: 0.5mm (0.020 ")
*Shank Diameter: 6mm (0.24 ")
*Cutting Length: 30.5mm (1.2 ")
*Overall Length: 75mm (2.96 ")
*Single Side angle: About B = 4.68 °
*Worked material HRC: 0 ~ 55 °
*Suitable processing: hardwood pieces of iron and other steel parts
Package Contents:
1*2-Flute End Mill
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

0.24 6mm Shank End Mill Bit Milling Cutter HRC55 Taper Ball Nose CNC Routers
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Suitable for: cutting, end milling, slotting: stainless steel, cast iron, copper, aluminum, carbon steel, die steel, etc.; hardwood, plywood, etc.;
* Use high quality imported tungsten steel hard alloy;
* Excellent chip removal effect, long lasting
* High surface finish, excellent work
Specifications:
* Model: TC-R1 * D6*30.5**75L2F;
* Manufacture: imported tungsten steel hard alloy;
* Flute: 2 flutes;
* Working material HRC: 0~55 degrees
* Radius: 1mm / 0.040";(Approx.)
* Coating: titanium aluminum nitride;
* Shank diameter: 6mm / 0.24";(Approx.)
* Cutting length: 30.5mm / 1.2";(Approx.)
* Total length: 75mm / 2.96";(Approx.)
* One side angle: B = 3.75°
Package Contents:
1*End Mill
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Cutting End Mills Equipment Ball Nose CNC Router Bit Milling HRC55 2 flutes
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Suitable for: cutting, end milling, slotting: stainless steel, cast iron, copper, aluminum, carbon steel, die steel, etc.; hardwood, plywood, etc.;
* Use high quality imported tungsten steel hard alloy;
* Excellent chip removal effect, long lasting
* High surface finish, excellent work
Specifications:
* Model: TC-R1 * D6*30.5**75L2F;
* Manufacture: imported tungsten steel hard alloy;
* Flute: 2 flutes;
* Working material HRC: 0~55 degrees
* Radius: 1mm / 0.040";(Approx.)
* Coating: titanium aluminum nitride;
* Shank diameter: 6mm / 0.24";(Approx.)
* Cutting length: 30.5mm / 1.2";(Approx.)
* Total length: 75mm / 2.96";(Approx.)
* One side angle: B = 3.75°
Package Contents:
1*End Mill
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

End mills R0.5*D6*30.5*75L HRC55 Taper Ball Nose CNC Bit Equipment New
Details:
*100% brand new and high quality
*Quality tungsten steel alloy taper Taper ball end mill
*Tapered Ball Nose End Mill / Cone Cutters
*More durable
*Model: R0.5 * D6 * 30.5 * 75L
*Material: tungsten steel
*Surface processing: Coating
*Flutes: 2 Flutes
*Radius: 0.5mm (0.020 ")
*Shank Diameter: 6mm (0.24 ")
*Cutting Length: 30.5mm (1.2 ")
*Overall Length: 75mm (2.96 ")
*Single Side angle: About B = 4.68 °
*Worked material HRC: 0 ~ 55 °
*Suitable processing: hardwood pieces of iron and other steel parts
Package Contents:
1*2-Flute End Mill
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Spiral Drill Drill Bit Handheld 2-8mm 6pcs Cobalt Steel 40~133mm Practical
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*HSS-Co bit kit for high strength steel, such as stainless steel
*With 5% cobalt alloy to improve heat resistance, which will perform and exceed normal HSS drill bits, especially if your work involves drilling tough metal
*Handheld and fixed use (in the drilling machine)
*135 degree split tip
Specification:
*Type: Drill
*Material: HSS-Co 5% M35Cobalt
*Size: 2mm,3mm,4mm,5mm,6mm,8mm (Approx.)
*Total Length: 40~133mm(Approx.)
*Quantity: 6pcs
Package Contents:
6 * Drill Bits
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

1x Taper Ball Nose End Mill Spiral CNC Router Bit Milling Cutter 2 Flutes HRC55
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Suitable for: cutting, end milling, slotting: stainless steel, cast iron, copper, aluminum, carbon steel, die steel, etc.; hardwood, plywood, etc.;
* Use high quality imported tungsten steel hard alloy;
* Excellent chip removal effect, long lasting
* High surface finish, excellent work
Specifications:
* Model: TC-R1 * D6*30.5**75L2F;
* Manufacture: imported tungsten steel hard alloy;
* Flute: 2 flutes;
* Working material HRC: 0~55 degrees
* Radius: 1mm / 0.040";(Approx.)
* Coating: titanium aluminum nitride;
* Shank diameter: 6mm / 0.24";(Approx.)
* Cutting length: 30.5mm / 1.2";(Approx.)
* Total length: 75mm / 2.96";(Approx.)
* One side angle: B = 3.75°
Package Contents:
1*End Mill
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Drill End mills 2-Flutes HRC55 Taper Ball Nose CNC Bit Tools Practical
Details:
*100% brand new and high quality
*Quality tungsten steel alloy taper Taper ball end mill
*Tapered Ball Nose End Mill / Cone Cutters
*More durable
*Model: R0.5 * D6 * 30.5 * 75L
*Material: tungsten steel
*Surface processing: Coating
*Flutes: 2 Flutes
*Radius: 0.5mm (0.020 ")
*Shank Diameter: 6mm (0.24 ")
*Cutting Length: 30.5mm (1.2 ")
*Overall Length: 75mm (2.96 ")
*Single Side angle: About B = 4.68 °
*Worked material HRC: 0 ~ 55 °
*Suitable processing: hardwood pieces of iron and other steel parts
Package Contents:
1*2-Flute End Mill
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

High quality Wooden Bead Maker Practical Milling Cutter Tools Quality Nice
Features:
*100% brand new and high quality
*Material: The Bead Drill tools made by Alloy Steel material, high hardness, very durable in use, corrosion resistance and anti-rust.
*Easy Cutting: Exquisite workmanship make it cut quickly and easily. These quality-shaped, cemented carbide cutter drill through any wood with precision. Each ball comes out almost perfect that you'll just need a little sanding or polishing after.
*DIY Handcrafts: Roll up your sleeves and create your own beads. Drill smooth spheres with the Wooden Bead Maker! This carves perfect rounded beads out of any piece of wood. Design your own jewelry, DIY handicrafts, home decors and more.
*Best Gift: With the forthcoming Holiday season, we continue to search for new gift ideas. But there's nothing more special than a present handcrafted by the givers. Personalize bracelets, necklaces, and other accessories or home decors with beads.
*Suitable Occasions: Fit for ebony, rosewood, deft knots, mahogany, rosewood, sandalwood blood, rosewood, ebony and so on.
Specifications:
*Material:Alloy Steel
*Diameter of the cutter handle: approx. 1 cm
*Cutter handle height: approx. 5.5 cm
*Blade size (LxW): approx. 3.5x1.5 cm
*Cutting diameter: 6 mm / 8 mm / 10 mm / 12 mm
*Color: As Pictures Show
*Quantily:10pcs
Tips:
1. When processing hardwood, the wood must be regular. The vertical stripes must be drilled at about 2600-2800. Do not press hard when entering the cutter. (The vertical stripes are the direction of the treetops toward the roots of the trees.)
2. When selecting materials, the width of the wood should be at least 4mm thicker than the blade width and 3-4mm thicker than the blade.
3. Cannot the cutter (the position of the cutter and the wood cannot be shifted during the work)
4. The wood must be clamped during work. It cannot be loose. It cannot be beaten. The edge of the wood. The crack in the head. The place where the wood is scarred.
Package Contents:
1 * Handle
1 * Wrench
4 * Cutters(6/8/10/12mm)
4 * Drill Bits
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Mill Metalworking Tool 6pcs Silver Steel Cutter 1/8"3/16"1/4"5/16"3/8"1/2"
Features:
*100% Brand new and high quality
*Made of high quality material, durable and practical to use
*Applied to cut carbon steel, mild steel, alloy steel, cast iron, titanium, aluminum and polycarbonate.
*The edge of end mill bit is hard and sharp, will reduce changing times and ensure the high efficiency of the work.
*Its open flute design helps to prevent burning while allowing the user
Specifications:
*Material: High Speed Steel (HSS)
*Color: As Pictures Show
*Size: 1/2", 3/8", 5/16", 3/16", 1/4", 1/8" (Approx.)
Package Contents:
6pcs/Set Milling Cutter (Including 1pc1/2" 1pc3/8" 1pc5/16" 1pc3/16" 1pc1/4" 1pc1/8")
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Boring bar Turning Tools Holder Set Shank SCMCN1010H06 Lathe Accessories
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*These insert are high strength, high toughness, stable and durable.
*Suitable for steel, cast iron roughing and semi-finishing.
*Model: SCMCN1010H06
*Tool Holder Diameter: 10mm (Approx.)
*Total Length: 100mm (Approx.)
*Insert: CCMT060204 (11)
*Size: 6 x 2.4mm(Approx.)
*Wrench: T8
Package Contents:
1*Holder
1*T8 Wrench
10*CCMT060204 Carbide Inserts
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Mill Metalworking Tool Silver HSS Milling Cutter 1/8"3/16"1/4"5/16"3/8"1/2"
Features:
*100% Brand new and high quality
*Made of high quality material, durable and practical to use
*Applied to cut carbon steel, mild steel, alloy steel, cast iron, titanium, aluminum and polycarbonate.
*The edge of end mill bit is hard and sharp, will reduce changing times and ensure the high efficiency of the work.
*Its open flute design helps to prevent burning while allowing the user
Specifications:
*Material: High Speed Steel (HSS)
*Color: As Pictures Show
*Size: 1/2", 3/8", 5/16", 3/16", 1/4", 1/8" (Approx.)
Package Contents:
6pcs/Set Milling Cutter (Including 1pc1/2" 1pc3/8" 1pc5/16" 1pc3/16" 1pc1/4" 1pc1/8")
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Heat-Resistant Welding Tool Kit 6Pcs/Set Cup Welding Fupa Glass Hot 2018
Features:
The cup and filters have been designed to provide excellent gas coverage even with long tungsten stick out.
Made from high temperature resistant Pyrex glass which will fit WP-9 and WP-17 Tig torches that have a stubby gas lens fitted with an easy push-on fitment.
Gives excellent gas coverage because of its size, its great for getting into those hard to reach locations and makes it easier to see what your working on.
Easy to assemble and use.
Durable and practical.
100% brand new and high quality.
Specification:
Quantity: 6pcs/kit
O-rings Color: Green (As Picture Show)
Pyrex Cup (ID): 21*14.7mm (Approx)
Package Contents:
1 * #12 Welding Cup
2 * Stainless Steel Filters
3 * O-rings
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

6x Glass Pyrex Cup Gas Lens Welding Tool Accessories Set For WP-9 WP-17 18 26
Features:
The cup and filters have been designed to provide excellent gas coverage even with long tungsten stick out.
Made from high temperature resistant Pyrex glass which will fit WP-9 and WP-17 Tig torches that have a stubby gas lens fitted with an easy push-on fitment.
Gives excellent gas coverage because of its size, its great for getting into those hard to reach locations and makes it easier to see what your working on.
Easy to assemble and use.
Durable and practical.
100% brand new and high quality.
Specification:
Quantity: 6pcs/kit
O-rings Color: Green (As Picture Show)
Pyrex Cup (ID): 21*14.7mm (Approx)
Package Contents:
1 * #12 Welding Cup
2 * Stainless Steel Filters
3 * O-rings
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

138mm HSS Right-Hand Tap Straight Shank Machine Plug Threading Screw Equipment
Features:
*100% Brand new and high quality
*Using High-quality HSS, high hardness quenching rigid and long service life.
*Sharpen cutting performance, good chip effect; good surface finish, large chip flutes, removal chip smooth.
Specifications:
*Color: As Pictures Show
*Material:High-speed steel
*Dimension: (Approx.)
Taps Threading: 13/16-16
Total length: 138mm/5.4inch
Package Content:
1*HSS Right Hand Tap
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Drilling bit set HSS TIN coated taper Hole cutter Cone Drill Bits For Metal Wood
Features:
*100% Brand new and high quality.
*This is the New HSS Steel Large Step Cone Drill Titanium Bit Set Hole Cutter,
*which is made from high quality HSS steel, and with the Titanium coated to reduce friction and heat
*It is very suitable for using to cut holes in a variety of materials including steel, brass, wood, plastic, etc
Specifications:
*Material: HSS Steel
*Finish: Titanium
*Length:
4-12mm Length: Approx. 6.7cm/ 2.64"
4-20mm Length: Approx. 7.4cm/ 2.91"
4-32mm Length: Approx. 10.2cm/ 4.02"
The 3 Cutters Come in the Following Sizes:
4-32mm (4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm, 30mm, 32mm)
4-20mm (4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 14mm, 16mm, 18mm, 20mm)
4-12mm (4mm, 6mm, 8mm, 10mm, 12mm)
Package Contents:
3pcs *HSS Steel Drill Bit Set(4-12mm 4-20mm 4-32mm)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

3pcs Drilling bit set HSS TIN coated taper Hole cutter Cone Drill Bits
Features:
*100% Brand new and high quality.
*This is the New HSS Steel Large Step Cone Drill Titanium Bit Set Hole Cutter,
*which is made from high quality HSS steel, and with the Titanium coated to reduce friction and heat
*It is very suitable for using to cut holes in a variety of materials including steel, brass, wood, plastic, etc
Specifications:
*Material: HSS Steel
*Finish: Titanium
*Length:
4-12mm Length: Approx. 6.7cm/ 2.64"
4-20mm Length: Approx. 7.4cm/ 2.91"
4-32mm Length: Approx. 10.2cm/ 4.02"
The 3 Cutters Come in the Following Sizes:
4-32mm (4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm, 30mm, 32mm)
4-20mm (4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 14mm, 16mm, 18mm, 20mm)
4-12mm (4mm, 6mm, 8mm, 10mm, 12mm)
Package Contents:
3pcs *HSS Steel Drill Bit Set(4-12mm 4-20mm 4-32mm)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

6Pcs #12 Fupa Glass Green Pyrex Cup TIG Welding Tool Kit For WP-9 WP-17 Gas Lens
Features:
The cup and filters have been designed to provide excellent gas coverage even with long tungsten stick out.
Made from high temperature resistant Pyrex glass which will fit WP-9 and WP-17 Tig torches that have a stubby gas lens fitted with an easy push-on fitment.
Gives excellent gas coverage because of its size, its great for getting into those hard to reach locations and makes it easier to see what your working on.
Easy to assemble and use.
Durable and practical.
100% brand new and high quality.
Specification:
Quantity: 6pcs/kit
O-rings Color: Green (As Picture Show)
Pyrex Cup (ID): 21*14.7mm (Approx)
Package Contents:
1 * #12 Welding Cup
2 * Stainless Steel Filters
3 * O-rings
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

CCMT060204 Turning Tool Holder Wrench Replacement Carbide inserts Useful
Features:
*12mm SCLCR1212H06 Lathe Turning Tool Holder 10pcs CCMT060204 VP15TF Inserts
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Good toughness and hardness, long service life.
*Practical, accurate and long service life.
*The fitting steel is very good, which reduces the cost of using the tool.
*High grip, strong impact resistance, clear speed advantage, cutting off and processing.
*Unmatched performance with tight tolerances.
*Practical and a variety of processing environments, even in very dirty environments, such as cast iron also has a very good function.
*User clamping is easy to replace, just replace the blade and gasket with a wrench.
Specifications:
Tool holder:
*Model: SCLCR1212H06
*Material: Stainless steel
Carbide inserts:
*Model: CCMT060204
*Material: Carbide TIAIN coating
*Suitable for steel, cast iron roughing and semi-finishing.
*Tool holder size: 79 * 15 * 12mm(Approx.)
*T8: 85mm(Approx.)
*Carbide insert size: 6 * 2.4mm(Approx.)
Package Contents:
1*Tool Holder
1*Wrench
10*Carbide Inserts
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Grinding Inserts Box Packed Edges CCMT CCGT CCGW CNC Non-ferrous metals
Item Details:
*100% brand new and high quality
*Better smoothness
*Fully fine grinding of the surrounding surface
*Sharp edges for easier cutting
*More durable
*For processing non-ferrous metals such as aluminum, copper, etc
*Model: CCMT CCGT CCGW
Package Contents:
10*Cutters(Box-packed)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Box Inserts Packed Edges CNC For metalworking Processing 10pcs CCMT CCGT CCGW
Item Details:
*100% brand new and high quality
*Better smoothness
*Fully fine grinding of the surrounding surface
*Sharp edges for easier cutting
*More durable
*For processing non-ferrous metals such as aluminum, copper, etc
*Model: CCMT CCGT CCGW
Package Contents:
10*Cutters(Box-packed)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Equipment Carbide Inserts Cutter WNMG0804 WNMG080404 WWLNR WWLNL Industrial
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Inserts has high strength, high toughness, stable and durable.
* For high hardness materials and cast iron.
* Metal surface treatment, good abrasion resistance.
* Mainly used for steel processing.
Specification:
* Insert Color: Gold (As pictures show)
* Material: Carbide
* Model: WNMG080404
* Size: 16.5 * 5mm(Approx.)
* Hole Diameter: 4.8 mm(Approx.)
* Processing: Finishing and Semi-Finishing
* Quantity: 10 pcs / box
Package Contents:
10*Carbide Inserts
1*Storage Box (Color Sent At Random)
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Replacement End Mill Universal For Stainless Steel Carbide End Durable
Item Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* It can roughen and finish the heat-treated materials below 65 degrees, which reduces the number of tool changes. Improves machine tool productivity. Saves production time
* 8mm HRC65 ° 4F nano tungsten carbide end mill for stainless steel
* Flute Length: 20mm(Approx.)
* Color: As pictures show
* Quantity: 1
Package Contents:
1*Milling Cutter
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Details:
Processing of copper / aluminum / nonferrous metal products.
The machined parts have better smoothness.
Durable and durable.
Full grinding with a German machine tool, including the bottom, the side, the surface.
High-precision.
Quantity: 10pcs/kit
Package Contents:
10 * Inserts
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Metalworking tool Carbide inserts Blade H01 RCGT1003MO Cutter Practical
Details:
Processing of copper / aluminum / nonferrous metal products.
The machined parts have better smoothness.
Durable and durable.
Full grinding with a German machine tool, including the bottom, the side, the surface.
High-precision.
Quantity: 10pcs/kit
Package Contents:
10 * Inserts
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Resistance Welding Glasses High stength Auto Darkening Arc Black Durable
Features:
*Solar powered auto darkening welding goggles.
*PC lens can resist ultraviolet ray.
*Anti-scraping, lens covered with anti-scraping coating.
*Anti-strong light, protect your eyes.
*Strong abrasion resistance, impact resistance.
*Durable in use.
*Great for welding.
Specification:
Lens material: PC
Power: Solar
Colour: Black
Delay time: 0.1s~3s
Shading level: 6-13
Variable speed: 5/10000s
Package includes:
1 * Welding Glasses
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Holder Boring Bar Threading For 16IR CNC INSERT SNR0016Q16 Latest Gift
Details:
Condition: 100% brand new
Model: SNR0016Q16
Shank Diameter: 16mm
Overall Length: 180mm
Min.Bore: 19mm
Direction: Right
Accept Insert: 16 IR
Insert I.C: 3/8"
Package Contents:
1 * Holder
1 * Wrench
(Insert not included)
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

1Pcs HRC45 Extra Long 6mm 4 Flute Straight Shank Carbide End Mill Cutter CNC Bit
Item Details:
6mm HRC45 4 Flute Extra Long Shank 150MM Carbide End Mill Milling Cutter CNC
100% brand new and high quality
Straight Long Shank Tungsten Carbide End Mill/milling machine tools
Model Number: CAE4-6X6 L150mm HRC45
Material: Carbide
Flute quantity: 4
Head Diameter: d=6mm) (Approx)
Shank Diameter: D=6mm) (Approx)
Cutting edge length: L1=30mm) (Approx)
Full length: L=150mm) (Approx)
Highest cutting hardness: HRC45
Certificate: ISO
Application material : for general steel alloy steel mold steel
Package Contents:
1*End Mill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

ISO End Mills Cutters Supplies Parts CAE4-6X6 L150mm HRC45 Router 4 Flute
Item Details:
6mm HRC45 4 Flute Extra Long Shank 150MM Carbide End Mill Milling Cutter CNC
100% brand new and high quality
Straight Long Shank Tungsten Carbide End Mill/milling machine tools
Model Number: CAE4-6X6 L150mm HRC45
Material: Carbide
Flute quantity: 4
Head Diameter: d=6mm) (Approx)
Shank Diameter: D=6mm) (Approx)
Cutting edge length: L1=30mm) (Approx)
Full length: L=150mm) (Approx)
Highest cutting hardness: HRC45
Certificate: ISO
Application material : for general steel alloy steel mold steel
Package Contents:
1*End Mill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Triangle Electric Drill Bit For Masonry Concrete Brick Drilling Bit Rotary Tool
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Uses: Widely used in ceramic tile, glass, brick wall, wood, etc.
*The surface is of painted and full grinding processing with anti-rust treatment which is smooth to drill.
*Single threaded U-type chip discharge groove make it smoother to drill.
*The design of triangular handle make it more fastening to clamp and not easy to slip.
Specifications:
*Material: Hard Alloy
*Color: Blue(As Pictures Show)
*Tool Holder Type: Triangle Handle
*Diameter: 8mm(Approx)
*Size: As Pictures Show
*Quantity: 10pcs
Package Contents:
10 * Triangle Drill Bits
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

7pcs Drill Socket Adapter kit 7 piece Impact Hex Nut Driver Hex Drill Bit
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*105° 1/4" hex drill bit screwdriver socket holder adaptor, fits most power drill, rechargeable drill, manual wrench and driver chucks.
*1/4" hex shank magnetic extension chuck adapter quick release bar socket screwdriver bit holder, suitable for electric, pneumatic screwdrivers and other screwdriver bits of power tools, drill extended.
*3pcs 1/4 inch hex shank colorful socket adapter: 1/4 inch drive adapter, 3/8 inch drive adapter, 1/2 inch drive adapter. Connect impact sockets/socket wrenches/sockets bits/driver sockets to power cordless.
*High strength and hardness
*The widely used 105° right angle drill driver can be connected to a drill rig, cordless drill or manual wrench to extend it to inaccessible narrow, twisted screws, nuts, etc.
*These tools are suitable for light drilling, low speed/spiral transmission, such as cordless drills, ratchet screwdrivers, etc.
Specification:
*Material: Steel Alloy
*Color: As pictures show
*Match: 1/4 inch; 6.35mm hexagon screwdriver
*Long section size: 128*32mm
*(1/4" hexagon head to 1/4" sleeve) socket joint, length: 65mm
(1/4" hex head to 3/8" socket) socket adapter, length: 65mm
(1/4" hex head to 1/2" sleeve) socket joint, length: 72mm
Package Contents:
1pc x 105° Hex Drill Bit Screwdriver Socket Holder Adaptor
3pcs x 1/4" Hex Shank Magnetic Extension Chuck Adapter
3pcs x Colorful Socket Adapter
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Impact Drill Socket Adapter Kit Bits Bar Screwdriver Socket Holder Adaptor New
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*105° 1/4" hex drill bit screwdriver socket holder adaptor, fits most power drill, rechargeable drill, manual wrench and driver chucks.
*1/4" hex shank magnetic extension chuck adapter quick release bar socket screwdriver bit holder, suitable for electric, pneumatic screwdrivers and other screwdriver bits of power tools, drill extended.
*3pcs 1/4 inch hex shank colorful socket adapter: 1/4 inch drive adapter, 3/8 inch drive adapter, 1/2 inch drive adapter. Connect impact sockets/socket wrenches/sockets bits/driver sockets to power cordless.
*High strength and hardness
*The widely used 105° right angle drill driver can be connected to a drill rig, cordless drill or manual wrench to extend it to inaccessible narrow, twisted screws, nuts, etc.
*These tools are suitable for light drilling, low speed/spiral transmission, such as cordless drills, ratchet screwdrivers, etc.
Specification:
*Material: Steel Alloy
*Color: As pictures show
*Match: 1/4 inch; 6.35mm hexagon screwdriver
*Long section size: 128*32mm
*(1/4" hexagon head to 1/4" sleeve) socket joint, length: 65mm
(1/4" hex head to 3/8" socket) socket adapter, length: 65mm
(1/4" hex head to 1/2" sleeve) socket joint, length: 72mm
Package Contents:
1pc x 105° Hex Drill Bit Screwdriver Socket Holder Adaptor
3pcs x 1/4" Hex Shank Magnetic Extension Chuck Adapter
3pcs x Colorful Socket Adapter
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

7pcs Drill Socket Adapter kit 7 piece Hex Nut Driver Bits Bar Screwdriver
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*105° 1/4" hex drill bit screwdriver socket holder adaptor, fits most power drill, rechargeable drill, manual wrench and driver chucks.
*1/4" hex shank magnetic extension chuck adapter quick release bar socket screwdriver bit holder, suitable for electric, pneumatic screwdrivers and other screwdriver bits of power tools, drill extended.
*3pcs 1/4 inch hex shank colorful socket adapter: 1/4 inch drive adapter, 3/8 inch drive adapter, 1/2 inch drive adapter. Connect impact sockets/socket wrenches/sockets bits/driver sockets to power cordless.
*High strength and hardness
*The widely used 105° right angle drill driver can be connected to a drill rig, cordless drill or manual wrench to extend it to inaccessible narrow, twisted screws, nuts, etc.
*These tools are suitable for light drilling, low speed/spiral transmission, such as cordless drills, ratchet screwdrivers, etc.
Specification:
*Material: Steel Alloy
*Color: As pictures show
*Match: 1/4 inch; 6.35mm hexagon screwdriver
*Long section size: 128*32mm
*(1/4" hexagon head to 1/4" sleeve) socket joint, length: 65mm
(1/4" hex head to 3/8" socket) socket adapter, length: 65mm
(1/4" hex head to 1/2" sleeve) socket joint, length: 72mm
Package Contents:
1pc x 105° Hex Drill Bit Screwdriver Socket Holder Adaptor
3pcs x 1/4" Hex Shank Magnetic Extension Chuck Adapter
3pcs x Colorful Socket Adapter
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Dry Diamond Drill Bits For Glass Ceramics Marble Porcelain Granite Useful
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*The dry diamond drill bit uses vacuum brazed technology which allows the dry bit to be used at a higher temperature to cut through hard porcelain tile, ceramics, marble and slate with ease. The integrated lubrivant aids cooling and prolongs life, which means there is no requirement for additional lubricant.
*Applied to granite & marble, masonry, concrete, tile/ceramic, glass, hard plastic.....
*Integrated lubricant, aids cooling and prolongs life, which means there is no requirement for additional lubricant.
*Hexagonal Shank, prevents slippage in the chuck.
*Built-in cooling wax does not require water
Specifications:
*Material: Diamond
*Optional Color:Silver(as pictures show)
*Length: 65mm(Approx.)
*Punch Diameter:6mm/8mm/10mm/12mm/14mm/16mm(Approx.)
*Working Length:33mm(Approx.)
*Outer Edge Angle:360 degree
Package Contents:
*Package1: 1*6mm Diamond Drill Bit
1*8mm Diamond Drill Bit
1*10mm Diamond Drill Bit
1*12mm Diamond Drill Bit
*Package2: 2*6mm Diamond Drill Bit
1*8mm Diamond Drill Bit
1*10mm Diamond Drill Bit
1*12mm Diamond Drill Bit
*Package3:1*6mm Diamond Drill Bit
1*8mm Diamond Drill Bit
1*10mm Diamond Drill Bit
1*12mm Diamond Drill Bit
1*14m Diamond Drill Bit
1*16mm Diamond Drill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

8pcs Carbon Steel Silver ER11 1-7mm Spring Collets With Extension Rod Equipment
Features:
* This kit includes a shank extension rod and 7 spring collets.
* 100% Brand new and high quality.
* The shank extension rod allows you to do deep hole processing.
* A perfect replacement for the old or worn one.
* Extension rod is designed to eliminate unbalance and increase safety during cutting and milling.
* It is widely used in boring, milling, drilling, tapping, grinding and other processing.
Specifications:
* Total height: Approx. 18mm
* Outer diameter(Max): Approx. 11.5mm
* Gripping range: 1~7MM (1mm,2mm,3mm,4mm,5mm,6mm,7mm)
* Fits metric shank size(s): For example,1mm Collets Fits 1mm metric shank,2mm Collets Fits 2mm metric shank.
* Material: High Grade 45 Carbon Steel
* Color: Silver(as pictures show)
Package contents:
1* 8pcs Spring Collets & Extension Rod Kit
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

CNC machine Tap set Pitch Tools 2pcs High Speed Steel Metric Tapers Thread
Item Details:
*2Pcs New HSS 22mm x 1.5 Metric Taper & Plug Tap Right Hand Thread M22 x 1.5mm Pitch
*100% brand new and high quality
*Material: High Speed Steel
*Total length: 90mm (Approx)
*Quantity: 2pcs
*Color: As Pictures Show
Package Contents:
2*Taps
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Metalworking Tool Tool Cutting Lathe High Quality Newest Protable Reliable
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
For aluminum processing, cutting
Specifications:
Model: VCGT110308-AK H01
Material: Carbide
Insert Color: Silver (As pictures show)
Quantity: 10pcs
Package Contents:
10*VCGT110308-AK H01 Inserts
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Auto Welding Glasses Darkening Helmet Goggle Infrared Anti-glare Non-sticky
Features:
*100% brand new and high quality
*This solar welding goggles are made of high quality PC material, which is strong and durable
*Special PC lens, with excellent impact resistance, resistance to high-speed ions, and UV protection
*The lens has strong impact resistance and strong impact resistance
*According to the needs of different people, we can adjust the length of the temples
*Anti-ultraviolet, infrared, anti-glare, non-sticky residue
Specifications:
*Material: PC and plastic
*Color: as shown
*Size: 150x30x70mm/5.91x1.18x2.76in
* Ultraviolet transmittance: <0.0001% (210-365nm)
*Infrared transmittance: <0.01% (780-2000nm)
*Working temperature: 15°C~ 60°C
* Response time: 1/10000ms
Package Contents:
1*welding glasses
1*Storage box
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

High Speed Steel Drill bits Silver Supplies Hole Saw Cutter Woodworking
Details:
*100% brand new and high quality
*Applicable tools: electric drill, bench drill, high power electric grinder, pneumatic drill, magnet drill, pistol drill with a chuck of 10MM or more
*Scope of application: This product series can provide the fine perforation you need on various wood boards, wood products, plastics, plywood and other materials. It is suitable for industrial hinge installation, wood processing and maintenance, model making, installation of spherical door tips, drawer tips. Etc.
*It is made of advanced technology, high quality material, and durable
*The hole is neat, smooth, without broken edge and chattering
*The cutting resistance is small, the opening speed is improved, and chip removal is easy
*It can be used for opening of various wood, wood products, plastics, plywood and other materials
*It is simple to install and convenient to use. It only needs to be installed on the ordinary electric hand drill
*Low working noise
*Color: Silver (As Pictures Show)
*Material: High Speed Steel
*Full length: 90 mm (Approx.)
*Size (Approx.): 15mm, 20mm, 25mm, 30mm, 35mm 1pcs/each
Package Contents:
5*Drill bits ( 15mm, 20mm, 25mm, 30mm, 35mm 1pcs/each )
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Kit Inserts 579283 Metal 10Pcs Lathe Metalworking Workholding Practical
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Suitable for processing steel and cast iron, processing soft and soft stainless steel aluminum alloy wire.
*10pcs16IR AG60 Inserts. Long service life.
Specification:
*Name: 10pcs16IR AG60 Inserts
*Model: 579283
*Material: Metal (KDC material)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*16IR AG60 Inserts
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

18mm S18Q-SCLCR09 Lathe Boring Bar Turning Tool t8 Wrench Equipment For CCMT09T3
Details:
Model: S18Q-SCLCR09
Tool Cutting Edge Angle: 95°
Accept Carbide Inserts: CCMT09T3 (CCMT32.5)
Shank Diameter: 18mm
Overall Length: 180mm
Package Contents:
1 * Holder
1 * T8 Wrench
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Pitch Tap thread Tapper 1pc Pipe Screw Drill bit Metric Metalworking Tool
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*1pc Tap M22mm x 1.5 metric machine tap M22x1.5 mm high quality(S)M22
*Color: As pictures show
*Quantity: 1
Package Contents:
1*Tap
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Cutter Plasma Consumables Electrodes Ceramic Nozzles Vortex rings 40pcs
Item Details:
*40Pcs Air Plasma Cutter Consumables Extend Tips For PT-31 LG-40 Torch CUT-40 50
*100% brand new and high quality
*Color: Rose gold white(As Pictures Show)
*Material: Metal ceramics
*Fit for: PT-31 LG-40 LGK-40 Torch CUT-40 50
*Ceramic nozzles size:(Approx)
Total length 30mm
Bottom inner diameter: 19mm
Inner diameter on the top: 9mm
*Vortex rings size:(Approx)
Total length: 5mm
Inner diameter: 5mm
*Nozzles size:(Approx)
Total length: 15mm
Bottom inner: 5mm
Bottom outside: 11mm
*Electrodes size:(Approx)
Total length: 39mm
Shank diameter: 3.5mm
Package Contents:
10pcs Ceramic nozzles
10pcs Vortex rings
10pcs Nozzles
10pcs Electrodes
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.