Kategóriák

C16-ER16A-150L Spring Collet Straight Shank Chucks CNC Lathe Milling Tool 17mm
Features:
*100% brand new and high quality
*Extension rod diameter and the other parts are precision ground to eliminate unbalance, increase safety when cutting
*It can reduce the use of extension tools, reduce costs and improve efficiency
*Spring Collect is highly clamping force, wide clamping range, high accuracy
*Widely used in boring, milling, drilling, tapping, grinding and other processing
Specifications:
*Color: Silver&Black (As Pictures Show)
*Shank chuck model: C16-ER16A-150L
*Shank diameter: 16mm
*Shank length: 150mm
*Spring Collet Model: ER16(10pcs, 1mm,2mm,3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm)
*Spring Collet Length: 27.5mm (Approx.)
*Spring Collet Diameter: 17mm (Approx.)
Package Contents:
1*Straight Shank Chuck
10*Spring Collets
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

14PC Drill Bit Self Centering Hinge Hardware Punch Door Tool Oblique blade
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
*Other features:
Efficient and accurate positioning;
Automatic positioning center can improve accuracy and efficiency. Double face design-quickly and automatically discharge wood chips from both sides of the hole;
The newly upgraded 135° oblique blade drill bit;
135° inclined blade drill bit makes drilling easier and faster;
The diameter of the shank of all center drill bits is 6mm, which is suitable for most general electric drills;
Suitable for hinges, handles, drawer slides, woodworking, etc. Suitable for professionals and DIY;
Use low speed when drilling (usually kept at 2000r/min-3000r/min). Too fast will deviate from the center, break or get stuck
Tips:
*Use low speed when drilling (usually kept at 2000r/min-3000r/min). Too fast will deviate from the center, break or get stuck
*When drilling holes, please adjust according to the hardness of the wood. If the wood is soft, you can choose a smaller center drill bit. If the wood is hard, you can choose the corresponding or larger wood
*If you cannot take out the center drill bit after drilling, use a hexagon wrench to separate the drill bit
Specifications:
*Material: HSS
*Color: Silver (As Pictures Show)
*Size (approximate):
1) 5/64 inches: the hole diameter is about 2 mm, use about 2.2-2.8 mm self-tapping screws
2) 7/64'': The hole diameter is about 2.8 mm, and the tapping screw of about 3-3.5 mm is used
3) 9/64'': The hole diameter is about 3.5mm, using about 4-4.5 mm self-tapping screws
4) 11/64'': The hole diameter is about 4.5mm, using about 5-5.5 mm self-tapping screws
5) 5mm: The hole diameter is about 5 mm, use about 5.5-6 mm self-tapping screws
6) 13/64": The hole diameter is about 5.2mm, using about 6-6.5 mm self-tapping screws
7) 1/4": The diameter of the hole is about 6.5mm, use a tapping screw of about 7-7.5 mm
Package Contents:
14 * Center drill bits (1/4", 5/64', 7/64'', 9/64'', 11/64'', 13/64'', 5mm)
2 * Hexagon wrench
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

359120 Lathe tool holder Facing Milling Turning Cut off Durable Useful
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Use multiple tools to form a manual tool library that can be replaced repeatedly.
*Use the dial to rotate the cutter at any angle of 9° or 9°. Combined with a small carriage, it can handle workpieces at various angles.
*The tool holder is equipped with an adjusting nut to adjust the height of the tool holder. It is easy to operate and shorten the loading time.
*Replace the tool only needs a few seconds.
*Quickly change the tool holder. Once installed, the processing stability is high.
*Fit to for CCMT TCMT milling inserts
Specification:
*Model: 659120
*Color: Black (As pictures show)
*Material: Aluminum Alloy
*Type: Cylindrical Tool Holder
*Size: 49 * 49 * 20mm (Approx.)
*Quantity: 5
Package Contents:
5 * Mini Lathe 1/4" -1/2" Tool Holder
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Quick change Lathe tool holder Cut off Equipment 359120 5pcs 1/4"- 1/2" Mini
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Use multiple tools to form a manual tool library that can be replaced repeatedly.
*Use the dial to rotate the cutter at any angle of 9° or 9°. Combined with a small carriage, it can handle workpieces at various angles.
*The tool holder is equipped with an adjusting nut to adjust the height of the tool holder. It is easy to operate and shorten the loading time.
*Replace the tool only needs a few seconds.
*Quickly change the tool holder. Once installed, the processing stability is high.
*Fit to for CCMT TCMT milling inserts
Specification:
*Model: 659120
*Color: Black (As pictures show)
*Material: Aluminum Alloy
*Type: Cylindrical Tool Holder
*Size: 49 * 49 * 20mm (Approx.)
*Quantity: 5
Package Contents:
5 * Mini Lathe 1/4" -1/2" Tool Holder
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

5pcs Lathe tool holder 359120 Post Mini Facing Milling Turning Durable
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Use multiple tools to form a manual tool library that can be replaced repeatedly.
*Use the dial to rotate the cutter at any angle of 9° or 9°. Combined with a small carriage, it can handle workpieces at various angles.
*The tool holder is equipped with an adjusting nut to adjust the height of the tool holder. It is easy to operate and shorten the loading time.
*Replace the tool only needs a few seconds.
*Quickly change the tool holder. Once installed, the processing stability is high.
*Fit to for CCMT TCMT milling inserts
Specification:
*Model: 659120
*Color: Black (As pictures show)
*Material: Aluminum Alloy
*Type: Cylindrical Tool Holder
*Size: 49 * 49 * 20mm (Approx.)
*Quantity: 5
Package Contents:
5 * Mini Lathe 1/4" -1/2" Tool Holder
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Welding Accessories Electrode CUT40/50 Accessory High Quality Durable Useful
Item Details:
100% brand new and high quality
Made of high quality material, durable and practical to use
These consumables suit for AG-60 and SG-55 plasma cutting torch.
Includes:
AG-60 Cup 10pcs
Electrode 20pcs
Nozzle 20pcs
AG-60(SG-55) plasma torch consumable, heat resistant
Plasma Nozzle, electrode, etc. series of accessoires, good capacity
The Brand of Machine would be for Rilon, for Riland, for Jasic, for Mitech, for Chiry, for UNT, for Krypton, for Longetivity, for Berlan and so on .
Package Contents:
50pcs/Set Welding Accessories
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Welding Accessories Electrode CUT40/50 Accessory New High Quality Durable
Item Details:
100% brand new and high quality
Made of high quality material, durable and practical to use
These consumables suit for AG-60 and SG-55 plasma cutting torch.
Includes:
AG-60 Cup 10pcs
Electrode 20pcs
Nozzle 20pcs
AG-60(SG-55) plasma torch consumable, heat resistant
Plasma Nozzle, electrode, etc. series of accessoires, good capacity
The Brand of Machine would be for Rilon, for Riland, for Jasic, for Mitech, for Chiry, for UNT, for Krypton, for Longetivity, for Berlan and so on .
Package Contents:
50pcs/Set Welding Accessories
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Woodworking Tool Drill Guide Spanner Stop rings Drill Lockable C-Clamp
Features:
*100% brand new and high quality.
*Angle: 15 degrees
*Drill diameter: 6mm, 8mm, 10mm
*Colour: Black
*Material: Aluminum alloy
*Positioner size: 75*50*26mm
*Stoppers Size: 6mm, 8mm, 10mm
*Sleeves Size: 6mm, 8mm, 10mm
*Main color: black
*Side chip discharge hole, not easy to block. The length can be adjusted to control the drilling depth.
Package contets:
1 x Drill Guide
6 x Drill bushings (6mm, 8mm, 10mm 2 each)
2x Spanner
3 x Stop rings (6mm, 8mm, 9.5mm)
3x Drill
1x Lockable C-Clamp(6inch)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Driver Hammer Adaptor Drill Bit Professional SDS Max To SDS Plus Chuck Drill
Details:
*100% brand new and high quality.
*For SDS Max To SDS Plus Adaptor Fits for Bosch, for Hilti, for MKT and else
*Allows The Use Of Any SDS Plus Drill Bits In A SDS Max Rotary Hammer Drill
*Color: Silver (As Pictures Show)
*Full length: 22cm (Approx.)
Package Contents:
1*Adapter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

1/4-1/2 Mini Lathe Quick Change Post Facing Milling Turning Tools Holder 5 Pcs
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Use multiple tools to form a manual tool library that can be replaced repeatedly.
*Use the dial to rotate the cutter at any angle of 9° or 9°. Combined with a small carriage, it can handle workpieces at various angles.
*The tool holder is equipped with an adjusting nut to adjust the height of the tool holder. It is easy to operate and shorten the loading time.
*Replace the tool only needs a few seconds.
*Quickly change the tool holder. Once installed, the processing stability is high.
*Fit to for CCMT TCMT milling inserts
Specification:
*Model: 659120
*Color: Black (As pictures show)
*Material: Aluminum Alloy
*Type: Cylindrical Tool Holder
*Size: 49 * 49 * 20mm (Approx.)
*Quantity: 5
Package Contents:
5 * Mini Lathe 1/4" -1/2" Tool Holder
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Reamer Tool Tube Reamer External Chucking Metalworking Practical Durable
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Ideal for reaming on stainless steel and copper tubing.
Features 40-cutting edges on the interior cone allow for fast, clean inner reaming and outer deburring and beveling of tubes.
Hardened steel construction for maximum durability; dual inch and metric measurement bar for ease of use.
Pipe reamer has a 3/16-inch to 1-3/8-inch outside diameter capacity.
The Inner-outer reamer is designed for the use on stainless steel, copper, steel and aluminum.
Specifications:
Reamer Type: Chucking Reamer
Reamer Diameter: 3/8 in(Approx.)
Color: As pictures show
Package Contents:
1*Reamer Tool
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Drill Bit Self Centering Hinge Hardware Hole Guides Door Window Hole Saw
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
*Other features:
Efficient and accurate positioning;
Automatic positioning center can improve accuracy and efficiency. Double face design-quickly and automatically discharge wood chips from both sides of the hole;
The newly upgraded 135° oblique blade drill bit;
135° inclined blade drill bit makes drilling easier and faster;
The diameter of the shank of all center drill bits is 6mm, which is suitable for most general electric drills;
Suitable for hinges, handles, drawer slides, woodworking, etc. Suitable for professionals and DIY;
Use low speed when drilling (usually kept at 2000r/min-3000r/min). Too fast will deviate from the center, break or get stuck
Tips:
*Use low speed when drilling (usually kept at 2000r/min-3000r/min). Too fast will deviate from the center, break or get stuck
*When drilling holes, please adjust according to the hardness of the wood. If the wood is soft, you can choose a smaller center drill bit. If the wood is hard, you can choose the corresponding or larger wood
*If you cannot take out the center drill bit after drilling, use a hexagon wrench to separate the drill bit
Specifications:
*Material: HSS
*Color: Silver (As Pictures Show)
*Size (approximate):
1) 5/64 inches: the hole diameter is about 2 mm, use about 2.2-2.8 mm self-tapping screws
2) 7/64'': The hole diameter is about 2.8 mm, and the tapping screw of about 3-3.5 mm is used
3) 9/64'': The hole diameter is about 3.5mm, using about 4-4.5 mm self-tapping screws
4) 11/64'': The hole diameter is about 4.5mm, using about 5-5.5 mm self-tapping screws
5) 5mm: The hole diameter is about 5 mm, use about 5.5-6 mm self-tapping screws
6) 13/64": The hole diameter is about 5.2mm, using about 6-6.5 mm self-tapping screws
7) 1/4": The diameter of the hole is about 6.5mm, use a tapping screw of about 7-7.5 mm
Package Contents:
14 * Center drill bits (1/4", 5/64', 7/64'', 9/64'', 11/64'', 13/64'', 5mm)
2 * Hexagon wrench
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Electric drill cleaning brush Scouring pad clean 19 pcs Useful Durable
Description
This is a package of drill brush attachments which fit most of the electric drills. Bristles will not scratch your bathtub and shower tile surfaces. This drill brush attachment kis is designed for clean bathtub, grout, bathroom surface, floor, tile, shower, toilet and carpet etc.
- Brand new and high quality.
- Nylon bristles will not scratch your bathtub and shower tile surfaces.
- Designed for clean bathtub, grout, bathroom surface, floor, tile, shower, toilet and carpet etc.
- Save you time and convenient to use.
Features
- Color: As shown
- Material: Nylon, PP.
- Packing Size: About 35x20x13cm.
Please Note: Drill is not included.
Package includes
19pcs Drill Brush
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Turning Holder Tool Black 51/4-1/2 Mini Lathe Post Facing Milling High Quality
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Use multiple tools to form a manual tool library that can be replaced repeatedly.
*Use the dial to rotate the cutter at any angle of 9° or 9°. Combined with a small carriage, it can handle workpieces at various angles.
*The tool holder is equipped with an adjusting nut to adjust the height of the tool holder. It is easy to operate and shorten the loading time.
*Replace the tool only needs a few seconds.
*Quickly change the tool holder. Once installed, the processing stability is high.
*Fit to for CCMT TCMT milling inserts
Specification:
*Model: 659120
*Color: Black (As pictures show)
*Material: Aluminum Alloy
*Type: Cylindrical Tool Holder
*Size: 49 * 49 * 20mm (Approx.)
*Quantity: 5
Package Contents:
5 * Mini Lathe 1/4" -1/2" Tool Holder
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Dry Grinding Glass Sand belt Woodworking Sanding Paper 25mm*6m High quality
Details:
*100% Brand new and high quality
*Made of high quality material, more durable.
*Dry matte belt box, sand belt wear-resistant sand, sand cloth soft, nylon fabric on the back, anti-stretching
*Suitable for fine grinding and polishing of metal, aluminum copper, hardwood, synthetic materials, etc.
*Grit:150#,240#,320#,400#,600#
*Color: As Pictures Show
*Dimension:25mm*6m (Approx.)
Package Contents:
1 Set sandpaper
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

New Solar Auto Darkening Welding Goggles Helmet Tig/Mig Grinding Shield Glasses
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Convenient and comfortable welding glasses for optimal eye protection.
Safety Glasses protect your eyes safe from direct and peripheral threats
Adjustable length comfort cushioned temples for optimal screen viewing, molded-in nose bridge for long wearing comfort- no matter what your face type or head size is
Fog, glare, and scratch resistant for better visibility, also it protects your eyes from 90-100% of harmful UV radiation.
Perfect for woodworking and carpentry, metal and construction work, lab, racquetball, etc.
Specifications:
Material: PC
Color: As pictures show
Size: 28x22x11cm / 11x8.67x4.33inch(Approx.)
Quantity: 1
Package Contents:
1*Welding Goggles
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

MT4 M16 Collet Chuck Holder Morse Taper Metalwork Engraving Motor CNC Milling
Details:
*100% Brand new and high quality
*Made of high quality material, more durable.
*MT4 Shank Holding all ER25 collets
*Drawbar : M16
*Color: As Pictures Show
Package Contents:
1*Collet Chuck Holder
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Dry Grinding Glass Sand belt 25mm*6m Anti-stretching Soft Sand Cloth New
Details:
*100% Brand new and high quality
*Made of high quality material, more durable.
*Dry matte belt box, sand belt wear-resistant sand, sand cloth soft, nylon fabric on the back, anti-stretching
*Suitable for fine grinding and polishing of metal, aluminum copper, hardwood, synthetic materials, etc.
*Grit:150#,240#,320#,400#,600#
*Color: As Pictures Show
*Dimension:25mm*6m (Approx.)
Package Contents:
1 Set sandpaper
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

1pc MT4 Shankd ER25 M16 Collet Chuck Holder CNC Milling Morse Taper Accessories
Details:
*100% Brand new and high quality
*Made of high quality material, more durable.
*MT4 Shank Holding all ER25 collets
*Drawbar : M16
*Color: As Pictures Show
Package Contents:
1*Collet Chuck Holder
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Features:
*100% brand new and high quality
*Extension rod diameter and the other parts are precision ground to eliminate unbalance, increase safety when cutting
*It can reduce the use of extension tools, reduce costs and improve efficiency
*Spring Collect is highly clamping force, wide clamping range, high accuracy
*Widely used in boring, milling, drilling, tapping, grinding and other processing
Specifications:
*Color: Silver&Black (As Pictures Show)
*Shank chuck model: C16-ER16A-150L
*Shank diameter: 16mm
*Shank length: 150mm
*Spring Collet Model: ER16(10pcs, 1mm,2mm,3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm)
*Spring Collet Length: 27.5mm (Approx.)
*Spring Collet Diameter: 17mm (Approx.)
Package Contents:
1*Straight Shank Chuck
10*Spring Collets
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Tungsten Carbide Rotary Cut Burr SET 1/4 Shank Reach Milling Cutter Reamer Burs
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Can be processed cast iron, cast steel, carbon steel, alloy steel, stainless steel, copper, aluminum and other metals, and marble, jade, bone and other non-metal. Processing hardness up to HRA ≥ 85.
*Processing efficiency than the manual file to improve the number of times smaller than the handle with a small wheel to improve nearly ten times.
*Basically replace the small wheel with a handle, and no dust pollution.
*Processing quality, finish high. Can process a variety of high-precision mold cavity shape.
*Easy to use, simple to use, safe and reliable.
*Integrated processing costs can be reduced several times.
Specifications:
*Color: Silver (As Pictures Show)
*Material: Carbide tungsten steel
*Shank Diameter:6mm (Approx.) (Approx.)
*Cutting Diameter:10mm (Approx.)
*Total Length:154mm,160mm,164mm,166mm,167mm,168mm (Approx.)
Note:
Rotary file in pneumatic or electric tools, the speed is generally 6000-40000 rev / min, must clamp the tool.
Cutting direction should be from right to left uniform movement, not like the use of grinding wheel as reciprocating cutting; be careful not to force too much (the pressure is generally not more than 4 kg).
Package Contents:
6*Rotary Burrs
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

T12 D08 C1 K Soldering Iron Tips Handle Series For FX-9501 HAKKO912 75W 12-24V
Product description:
Set B:T12-D08
T12-C1
T12-D4
T12-K
T12-BC2
T12-I
T12-D24
T12-C4
T12-JL02
T12-B
Model: T12 series
Input voltage: 12-24V
Maximum power: 75W
Temperature adjustment range: 0-600
Scope of application: lead-free soldering
Applicable soldering station: 942/950/951/952/202/203/204/206 soldering station
Applicable handle: FX-9501/HAKKO912/FM-2027/2028 handle
Features of T12 soldering iron tip: The sensor is fully front-facing, and it is highly sensitive to temperature changes; the heating core is installed inside the small-volume soldering iron tip, with minimal heat loss. Two major features have achieved the extraordinary heating ability of the T12 soldering iron tip, and truly realized the fluency of lead-free soldering at a low temperature of 350 degrees.
Using refined copper as the main material, excellent thermal conductivity, special iron plating process, corrosion, oxidation resistance, and long life. Extremely strong wettability, ductility, easy soldering, round solder joints; scientific and rigorous chemical inspection, balanced inductance, and stable quality. Lead-free materials, lead-free environment manufacturing.
Package list:
10PCS
Package B: T12-D08/T12-C1/T12-D4/T12-K/T12-BC2/T12-I/T12-D24/T12-C4/T12-JL02/T12-B
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Speed Welding Nozzles For PVC Plastic Hot Air Tool
4PCS Speed Welding Nozzles For Vinyl PVC Plastic Welding ,5mm Standard Nozzle And 5mm Speed Welding Nozzle
Specifications:
Material: Titanium Alloy
Color: As pictures show
Quantity: 4PCS/Set
Package Contents:
1* 5mm Standard Nozzle
1* 5mm Speed Welding Nozzle Round
1* 5mm Speed Welding Nozzle Triangular
1* Tacking Nozzle
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

4pcs Welding Nozzle For Vinyl PVC Plastic Hot Air Tool Practical Brand New
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Speed Welding Nozzles For PVC Plastic Hot Air Tool
4PCS Speed Welding Nozzles For Vinyl PVC Plastic Welding ,5mm Standard Nozzle And 5mm Speed Welding Nozzle
Specifications:
Material: Titanium Alloy
Color: As pictures show
Quantity: 4PCS/Set
Package Contents:
1* 5mm Standard Nozzle
1* 5mm Speed Welding Nozzle Round
1* 5mm Speed Welding Nozzle Triangular
1* Tacking Nozzle
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Morse Taper Reamer Set Straight Shank Coarse Reamer Hot sale Practical
Features:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*Buy once, use for a long time.
*Fine workmanship and long service life.
* Stable characteristics and high reliability.
Specifications:
*Name: Morse reamer with straight handle
*Material: Alloy tool steel (9SiCr
*Color: as shown
*Quantity: 1Pc rough machining reamer and 1Pc finishing/fine reamer
*Accuracy: H8
*size: MT1/MT2/MT3/MT4/MT5.
Package Contents:
2* Morse Reamer
Tips:
*Conversion: 1inch = 2.54cm, 1cm = 0.393inches
*All pictures are professional colors, but due to different ambient light and display device settings, there may be some deviations between the pictures you see and the project itself. Please understand.
*The data is manually measured, there may be some deviations, but it does not affect the use
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Morse Taper Reamer Set Straight Shank Coarse Reamer Hot sale Practical
Features:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*Buy once, use for a long time.
*Fine workmanship and long service life.
* Stable characteristics and high reliability.
Specifications:
*Name: Morse reamer with straight handle
*Material: Alloy tool steel (9SiCr
*Color: as shown
*Quantity: 1Pc rough machining reamer and 1Pc finishing/fine reamer
*Accuracy: H8
*size: MT1/MT2/MT3/MT4/MT5.
Package Contents:
2* Morse Reamer
Tips:
*Conversion: 1inch = 2.54cm, 1cm = 0.393inches
*All pictures are professional colors, but due to different ambient light and display device settings, there may be some deviations between the pictures you see and the project itself. Please understand.
*The data is manually measured, there may be some deviations, but it does not affect the use
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Morse Taper Reamer Set Straight Shank Coarse Reamer Hot sale Practical
Features:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*Buy once, use for a long time.
*Fine workmanship and long service life.
* Stable characteristics and high reliability.
Specifications:
*Name: Morse reamer with straight handle
*Material: Alloy tool steel (9SiCr
*Color: as shown
*Quantity: 1Pc rough machining reamer and 1Pc finishing/fine reamer
*Accuracy: H8
*size: MT1/MT2/MT3/MT4/MT5.
Package Contents:
2* Morse Reamer
Tips:
*Conversion: 1inch = 2.54cm, 1cm = 0.393inches
*All pictures are professional colors, but due to different ambient light and display device settings, there may be some deviations between the pictures you see and the project itself. Please understand.
*The data is manually measured, there may be some deviations, but it does not affect the use
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Morse Taper Reamer Set Straight Shank Coarse Reamer Hot sale Practical
Features:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*Buy once, use for a long time.
*Fine workmanship and long service life.
* Stable characteristics and high reliability.
Specifications:
*Name: Morse reamer with straight handle
*Material: Alloy tool steel (9SiCr
*Color: as shown
*Quantity: 1Pc rough machining reamer and 1Pc finishing/fine reamer
*Accuracy: H8
*size: MT1/MT2/MT3/MT4/MT5.
Package Contents:
2* Morse Reamer
Tips:
*Conversion: 1inch = 2.54cm, 1cm = 0.393inches
*All pictures are professional colors, but due to different ambient light and display device settings, there may be some deviations between the pictures you see and the project itself. Please understand.
*The data is manually measured, there may be some deviations, but it does not affect the use
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Morse Taper Reamer Set Straight Shank Coarse Reamer Hot sale Practical
Features:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*Buy once, use for a long time.
*Fine workmanship and long service life.
* Stable characteristics and high reliability.
Specifications:
*Name: Morse reamer with straight handle
*Material: Alloy tool steel (9SiCr
*Color: as shown
*Quantity: 1Pc rough machining reamer and 1Pc finishing/fine reamer
*Accuracy: H8
*size: MT1/MT2/MT3/MT4/MT5.
Package Contents:
2* Morse Reamer
Tips:
*Conversion: 1inch = 2.54cm, 1cm = 0.393inches
*All pictures are professional colors, but due to different ambient light and display device settings, there may be some deviations between the pictures you see and the project itself. Please understand.
*The data is manually measured, there may be some deviations, but it does not affect the use
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

14pcs Drill Brushes Car Wash Brush Cleaning Tools Pads 14pcs/Set Drill
Details:
*100% Brand new and high quality
*Mainly used for household cleaning, such as sofas, kitchens, bathrooms, wood, tiles, wheels, etc.
*Brush cleaning bathtub, mud, interior, bathtub surface, floor, tile, shower, toilet and carpet.
*Nylon brush will not damage the surface
*Wipe pad and sponge: Ideal for kitchen cleaning, ovens, water tanks, cast iron frying pans, frying pans, pans and pans.
*Can make the cleaning speed slower, faster and cleaner.
*Color: As Pictures Show
Package Contents:
1 * 2" yellow drill cleaning brush
1*3.5 inch yellow drilling brush
1 * 4" yellow drill cleaning brush
1*5 inch red drilling brush
1 * 6" 150 mm extension attachment
3* green scrub pad
3* red wash pad
2 * Orange sponge
1 * 4 inch pad(not included drill)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

CCMT0602 Carbide Insert Blade S07K/S08K/S10K/S12M-SCLCR06 Boring Bar Tool Holder
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Right-hand internal boring bar, with an approach angle of 95 °, for boring and face cutting
* Using 80 ° diamond-shaped CCMT inserts, 5 ° end face and side cutting angle
* Beads for semi-finishing and finishing
* Hardened and tempered tool holders, up to 45HRC, high temperature resistance
* Kit contains inserts, clamping screws and wrenches, ready to use
Specification:
* Tool Material: Steel
* Approach Angle: 95 °
* Insert: CCMT060204
* Insert Material: Carbide
* Model: S07K-SCLCR06, S08K-SCLCR06, S10K-SCLCR06, S12M-SCLCR06
* Insert: CC..0602 .., CC..0602 .., CC..0602 .., CC..0602 ..
* Minimum Starting Hole: 9mm, 10mm, 13mm, 16mm(Approx.)
* Diameter: 8mm, 8mm, 10mm, 12mm(Approx.)
* Height: 7mm, 7mm, 9mm, 11mm(Approx.)
* Length: 125mm, 125mm, 125mm, 150mm(Approx.)
* Screw: M2.5x5, M2.5x6
* Wrench: T8
Package Contents:
1*S07K-SCLCR06 Boring Bar
1*S08K-SCLCR06 Boring Bar
1*S10K-SCLCR06 Boring Bar
1*S12M-SCLCR06 Boring Bar
4*T8 Wrenches
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

CNC milling Collet Chuck Tool Holder New High quality 1 pc Useful 100L
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Straight shank type extended handle, the handle body was longer, applicable to deep hole processing, resolve to extend the depth of processing needs.
The nut can direct tighten, high rigidity and strong clamping force.
Specifications:
Model: C32-ER32
Material: Chrome Molybdenum Alloy Steel
Overall Length: 140mm(Approx.)
Clamping Shank Diameter: 32mm(Approx.)
Collet Chuck Model: ER32(Clip Range: 2mm-20mm)
Shank Length: 100mm(Approx.)
Package Contents:
1x Straight Collet Chuck Holder (Spanner Not Included)
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Gas Lens Pyrex Copper Aluminum Torch Replacement Metalworking Practical
Details:
*100% brand new and high quality
*Electrode clip for the copper material, a very small amount of impurities, especially phosphorus, arsenic, aluminum, etc., will greatly reduce the copper conductivity
*Durable and practical
*Easy to assemble and use
*Fit for Tig WP-17/18/26
*Type: welding accessories
*Applicable scope: TIG
Package Contents:
1pc #4 13N08 alumina nozzle D6.5mm x 1/4"
1pc #5 13N09 alumina nozzle D8.0mm x 5/16"
1pc #6 13N10 alumina nozzle D9.50mm x 3/8"
1pc #7 13N11 alumina nozzle D11.0mm x 7/16"
1pc #8 13N12 alumina nozzle D12.50mm x 1/2"
1pc 17CB20-1.0 collets body stubby gas lens
1pc 17CB20-1.6 collets body stubby gas lens
1pc 17CB20-2.4 collets body stubby gas lens
1pc 17CB20-3.2 collets body stubby gas lens
1pc 18CG-20 cup gasket
2pcs 10N22S collets for Tig welding torch 1.0mm 0.040"
2pcs 10N23S collets for Tig welding torch 1.6mm 1/16"
2pcs 10N24S collets for Tig welding torch 2.4mm 3/32"
2pcs 10N25S collets for Tig welding torch 3.2mm 1/8""
1pc #4 53N58 alumina nozzle cups 6.5mm 1/4"
1pc #5 53N59 alumina nozzle cups 8.0mm 5/16"
1pc #6 53N60 alumina nozzle cups 9.5mm 3/8"
1pc #7 53N61 alumina nozzle cups 11.0mm 1/16"
1pc #8 53N61S alumina nozzle cups 12.5mm 1/2"
1pc 17CB20G collets body for Tig welding torch 1.0mm 0.040"
1pc 17CB20G collets body for Tig welding torch 1.6mm 1/16"
1pc 17CB20G collets body for Tig welding torch 2.4mm 3/32"
1pc 17CB20G collets body for Tig welding torch 3.2mm 1/8"
1pc 18CGG cup gasket
4pcs #10 Pyrex glass cup
8pcs Temperature resistant o-rings
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

3 X Planer Blades 13*1*1/8 Inch HSS Sharp Blade For Jet JPM-13 Grizzly Delta
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*The primary and secondary bevels of the blade are close to the edge
*Compared with ordinary blades, they are made of higher-grade high-speed steel, with longer edge life and sharper
*Three super sharp flat blades in the set
Specifications:
*Material: high speed steel
*Color:As Pictures Show
*Size:Length -330mm(13inch)
Width-25mm(1inch)
Thickness -3mm (1/8inch)
*Quantity: 3 pc
Package Contents:
3*Planer Blades
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

10pcs Inserts SER2020K16 Lathe Turning Tool Holder Boring 16ER AG60 Supply Set
Features:
To maintain tight tolerances unmatched performance.
Accessories steel is good, long life, reducing the user cost of the tool.
High grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing.
User clamping and convenient way to replace, only a wrench to complete the replacement of the blade and pad.
Practical and suitable for a variety of processing environments, even in very dirty environments such as cast iron also has good features.
Specification:
Model: SER2020K16
Shank Square Size: 20*20 mm (Approx)
Shank Length: 125 mm (Approx)
Wrench: T15
Inserts Material: Steel
Accept Inserts: 16ER AG60 (10pcs)
Suitable For: Semi-finishing, finishing
Package Contents:
10 * 16ER AG60 Inserts
1 * SER2020K16 Holder
1 * Wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

100x Plasma Cutter Cutting Consumable CUT-40 CUT-50D CT-312 LGK-40 Cutting Torch
Details:
High quality and brand new
The consumables can work with ESAB/L-TEC PT-31, JG-40 and WSD-LG40 Cutting Torch
These torches for Plasma cutting machines such as CUT-40, CUT-40D,LGK-40, CT312, CT312D,CT416,CT416D,CT518, CT518D, Super160, Super160P etc
Quantity: 100pcs/set
Set include: 40pcs tips, 30pcs electrode, 10pcs shieded cup, 20pcs gas ring
Package Contents:
100 * Plasma Cutter Consumables
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Planer Blades Hard High stength 3 Pcs Sharp Spare 13*1*1/8 inch HSS Hot sale Hot
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*The primary and secondary bevels of the blade are close to the edge
*Compared with ordinary blades, they are made of higher-grade high-speed steel, with longer edge life and sharper
*Three super sharp flat blades in the set
Specifications:
*Material: high speed steel
*Color:As Pictures Show
*Size:Length -330mm(13inch)
Width-25mm(1inch)
Thickness -3mm (1/8inch)
*Quantity: 3 pc
Package Contents:
3*Planer Blades
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Planer parts Planer Blades Hard High stength Sharp Spare HSS Practical
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*The primary and secondary bevels of the blade are close to the edge
*Compared with ordinary blades, they are made of higher-grade high-speed steel, with longer edge life and sharper
*Three super sharp flat blades in the set
Specifications:
*Material: high speed steel
*Color:As Pictures Show
*Size:Length -330mm(13inch)
Width-25mm(1inch)
Thickness -3mm (1/8inch)
*Quantity: 3 pc
Package Contents:
3*Planer Blades
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Carving Rotary Burrs Marble Jade Bone Engraving Tools Supplies Durable
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Can be processed cast iron, cast steel, carbon steel, alloy steel, stainless steel, copper, aluminum and other metals, and marble, jade, bone and other non-metal. Processing hardness up to HRA ≥ 85.
*Processing efficiency than the manual file to improve the number of times smaller than the handle with a small wheel to improve nearly ten times.
*Basically replace the small wheel with a handle, and no dust pollution.
*Processing quality, finish high. Can process a variety of high-precision mold cavity shape.
*Easy to use, simple to use, safe and reliable.
*Integrated processing costs can be reduced several times.
Specifications:
*Color: Silver (As Pictures Show)
*Material: Carbide tungsten steel
*Shank Diameter:6mm (Approx.) (Approx.)
*Cutting Diameter:10mm (Approx.)
*Total Length:154mm,160mm,164mm,166mm,167mm,168mm (Approx.)
Note:
Rotary file in pneumatic or electric tools, the speed is generally 6000-40000 rev / min, must clamp the tool.
Cutting direction should be from right to left uniform movement, not like the use of grinding wheel as reciprocating cutting; be careful not to force too much (the pressure is generally not more than 4 kg).
Package Contents:
6*Rotary Burrs
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Roller Guide 45pcs / Set Cups Accessories Tips Electrode Welding Equipment
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
P80 Plasma Cutter Cutting Torch Consumable Tips Electrode Shield Guide 45pcs/Set
Specifications:
Item Type: Welding Accessories
Main Color: Silver(As pictures show)
Quantity: 45pcs/Set
Package Contents:
20*Tips
20*Electrodes
4*Cups
1*Roller Guide
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Inner Turning Tool Holder Thread S06K/S07K/S08K//S10K/S12M-SCLCR06 15pcs
Details:
*100% brand new and high quality.
*5PCS Turning Tool Bore Inner Holder ((S06K/S07K/S08K//S10K/S12M-SCLCR06 1pc each)
*Material: Plastic Carbide
*Color: As Pictures Show
*Quantity: 15 pcs
*Wrench: T7
*Size (Approx.):
Model S06K-SCLCR06: Dimension 6*125mm
Model S07K-SCLCR06: Dimension 7*125mm
Model S08K-SCLCR06: Dimension 8*125mm
Model S10K-SCLCR06: Dimension 10*125mm
Model S12M-SCLCR06: Dimension 12*150mm
Package Contents:
1 * S06K-SCLCR06 Turning Tool Holder
1 * S07K-SCLCR06 Turning Tool Holder
1 * S08K-SCLCR06 Turning Tool Holder
1 * S10K-SCLCR06 Turning Tool Holder
1 * S12M-SCLCR06 Turning Tool Holder
5 * Wrench
5 * Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

6pcs 1/4 Rotary Cutting Burrs Shank Long Reach Carbide Cutter Burrs Tool Set
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Can be processed cast iron, cast steel, carbon steel, alloy steel, stainless steel, copper, aluminum and other metals, and marble, jade, bone and other non-metal. Processing hardness up to HRA ≥ 85.
*Processing efficiency than the manual file to improve the number of times smaller than the handle with a small wheel to improve nearly ten times.
*Basically replace the small wheel with a handle, and no dust pollution.
*Processing quality, finish high. Can process a variety of high-precision mold cavity shape.
*Easy to use, simple to use, safe and reliable.
*Integrated processing costs can be reduced several times.
Specifications:
*Color: Silver (As Pictures Show)
*Material: Carbide tungsten steel
*Shank Diameter:6mm (Approx.) (Approx.)
*Cutting Diameter:10mm (Approx.)
*Total Length:154mm,160mm,164mm,166mm,167mm,168mm (Approx.)
Note:
Rotary file in pneumatic or electric tools, the speed is generally 6000-40000 rev / min, must clamp the tool.
Cutting direction should be from right to left uniform movement, not like the use of grinding wheel as reciprocating cutting; be careful not to force too much (the pressure is generally not more than 4 kg).
Package Contents:
6*Rotary Burrs
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Inner Turning Tool Holder Metal Bore Boring S06K/S07K/S08K//S10K/S12M-SCLCR06
Details:
*100% brand new and high quality.
*5PCS Turning Tool Bore Inner Holder ((S06K/S07K/S08K//S10K/S12M-SCLCR06 1pc each)
*Material: Plastic Carbide
*Color: As Pictures Show
*Quantity: 15 pcs
*Wrench: T7
*Size (Approx.):
Model S06K-SCLCR06: Dimension 6*125mm
Model S07K-SCLCR06: Dimension 7*125mm
Model S08K-SCLCR06: Dimension 8*125mm
Model S10K-SCLCR06: Dimension 10*125mm
Model S12M-SCLCR06: Dimension 12*150mm
Package Contents:
1 * S06K-SCLCR06 Turning Tool Holder
1 * S07K-SCLCR06 Turning Tool Holder
1 * S08K-SCLCR06 Turning Tool Holder
1 * S10K-SCLCR06 Turning Tool Holder
1 * S12M-SCLCR06 Turning Tool Holder
5 * Wrench
5 * Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

SER2020K16 Lathe Turning Tools Holder Boring Bar 10x 16ER AG60 Carbide Inserts
Features:
To maintain tight tolerances unmatched performance.
Accessories steel is good, long life, reducing the user cost of the tool.
High grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing.
User clamping and convenient way to replace, only a wrench to complete the replacement of the blade and pad.
Practical and suitable for a variety of processing environments, even in very dirty environments such as cast iron also has good features.
Specification:
Model: SER2020K16
Shank Square Size: 20*20 mm (Approx)
Shank Length: 125 mm (Approx)
Wrench: T15
Inserts Material: Steel
Accept Inserts: 16ER AG60 (10pcs)
Suitable For: Semi-finishing, finishing
Package Contents:
10 * 16ER AG60 Inserts
1 * SER2020K16 Holder
1 * Wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

100x PT-31 LG-40 Plasma Cutter Cutting Consumable Kits For CUT-50D CT-312
Details:
High quality and brand new
The consumables can work with ESAB/L-TEC PT-31, JG-40 and WSD-LG40 Cutting Torch
These torches for Plasma cutting machines such as CUT-40, CUT-40D,LGK-40, CT312, CT312D,CT416,CT416D,CT518, CT518D, Super160, Super160P etc
Quantity: 100pcs/set
Set include: 40pcs tips, 30pcs electrode, 10pcs shieded cup, 20pcs gas ring
Package Contents:
100 * Plasma Cutter Consumables
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

T15 Steel Threading Lathe Turning Tool Holder Boring Bar Metalworking Multitool
Features:
To maintain tight tolerances unmatched performance.
Accessories steel is good, long life, reducing the user cost of the tool.
High grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing.
User clamping and convenient way to replace, only a wrench to complete the replacement of the blade and pad.
Practical and suitable for a variety of processing environments, even in very dirty environments such as cast iron also has good features.
Specification:
Model: SER2020K16
Shank Square Size: 20*20 mm (Approx)
Shank Length: 125 mm (Approx)
Wrench: T15
Inserts Material: Steel
Accept Inserts: 16ER AG60 (10pcs)
Suitable For: Semi-finishing, finishing
Package Contents:
10 * 16ER AG60 Inserts
1 * SER2020K16 Holder
1 * Wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

100x PT-31 LG-40 Plasma Cutter Cutting Consumable CT312, CT312D,CT416,CT416D
Details:
High quality and brand new
The consumables can work with ESAB/L-TEC PT-31, JG-40 and WSD-LG40 Cutting Torch
These torches for Plasma cutting machines such as CUT-40, CUT-40D,LGK-40, CT312, CT312D,CT416,CT416D,CT518, CT518D, Super160, Super160P etc
Quantity: 100pcs/set
Set include: 40pcs tips, 30pcs electrode, 10pcs shieded cup, 20pcs gas ring
Package Contents:
100 * Plasma Cutter Consumables
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Rotary double-cut burr bit Set 6mm Carbide 1/4" File Craft Carving Practical New
Features:
100% brand new and high quality
Made of high-quality materials, durable
The use of cemented carbide rotary files is extremely wide, and it is used in mold processing and manufacturing. Beveling, rounding and groove processing of machine parts.
It can process cast iron, cast steel, carbon steel, alloy steel, stainless steel, copper, aluminum and other metals, as well as marble, jade, bones and other non-metals.
It is widely used in machinery, automobiles, shipbuilding, chemical industry, craft carving, etc.
The processing quality is good, the finish is high, and the service life is long. It can process various high-precision mold cavities.
Easy to master, easy to use, safe and reliable. It greatly reduces heavy physical labor and reduces production costs.
Carbide rotary files mainly support the use of electric tools or the use of electric tools or pneumatic tools (also can be installed on machine tools)
Product parameters:
Material: Tungsten steel YG8
Color: as shown
Blade diameter: 6-12mm
Tool handle diameter: 6mm (1/4")
Total length: 45-65mm
Groove: double rotation
A: Cylindrical shape
C: Cylindrical ball head
D: spherical
F: Elbow head
Usage: only one-sided grinding, not back and forth grinding
The package includes:
8 *Carbide rotary double-cut burr bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

10 Pcs T12 Series Soldering Tips Weld Solder Tip For HAKKO D08 Soldering Station
Product description:
Set B:T12-D08
T12-C1
T12-D4
T12-K
T12-BC2
T12-I
T12-D24
T12-C4
T12-JL02
T12-B
Model: T12 series
Input voltage: 12-24V
Maximum power: 75W
Temperature adjustment range: 0-600
Scope of application: lead-free soldering
Applicable soldering station: 942/950/951/952/202/203/204/206 soldering station
Applicable handle: FX-9501/HAKKO912/FM-2027/2028 handle
Features of T12 soldering iron tip: The sensor is fully front-facing, and it is highly sensitive to temperature changes; the heating core is installed inside the small-volume soldering iron tip, with minimal heat loss. Two major features have achieved the extraordinary heating ability of the T12 soldering iron tip, and truly realized the fluency of lead-free soldering at a low temperature of 350 degrees.
Using refined copper as the main material, excellent thermal conductivity, special iron plating process, corrosion, oxidation resistance, and long life. Extremely strong wettability, ductility, easy soldering, round solder joints; scientific and rigorous chemical inspection, balanced inductance, and stable quality. Lead-free materials, lead-free environment manufacturing.
Package list:
10PCS
Package B: T12-D08/T12-C1/T12-D4/T12-K/T12-BC2/T12-I/T12-D24/T12-C4/T12-JL02/T12-B
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Hexagon Handle Sockets Nut Drivers Converter 14pcs Attachment Workshop
Details:
*100% brand new and high quality
*Designed for 1/4" hex shank bits.
*Extra strength magnet holds bits securely.
*High strength and hardness.
*Easy to use.
*Durable in use.
*Uses in automotive, hardware, hobby, home, etc.
*Fits all power drills, cordless & magnetic drivers sandblasted, Chrome Vanadium Steel bits.
*Color: Silver (As Pictures Show)
*Material: HSS
*Hex Size: 1/4" (Approx.)
*Size (Approx.): 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm
Package Contents:
14*Magnetic Drill Bits
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.