Kategóriák

Description:
Mini USB Soldering Iron Welding Pen Mobile Phone Repair Welding Tools
Description:
100% new high quality
Color: as shown
Material: plastic, metal
Power supply parameters: 8W 5V 2A (the best effect above 2A)
Power supply mode: charging treasure / mobile power, repair power meter USB port, USB charging head, notebook / desktop computer USB port
feature:
Small size and full-featured, it is very suitable for USB power iron fans!
Fast heating and cooling means you can work efficiently and quickly.
With a pointed protective cap
Made from new, high-quality materials for durability
Note: Do not rotate when removing the cap, just pull it off. Otherwise, if the tip is loose, it will not heat or the heat will not last. Be sure to keep the nut on the tip in the tightened state!
The product contains: 1 set of tools
SPU: HJU9547
Preview:

description:100% new high quality
Color as shown
size:50mm*220mm
materialmetal
Uses: Use in any electric or cordless drill that can accommodate a 3/8" bit. No better tool for digging deep holes in your dirt or even under sidewalks.
Packing: 1* drill head

Description:Description:
100% brand new and high quality
specification:Product Name: 4000W AC voltage regulator
Thyristor Model: BTA41600B
Maximum power: 4000W (resistive load limit power), long time should be reduced power use.
Efficiency: more than 90%
Working voltage: AC 220V
Adjust the voltage: AC 10-220V
Note that the load must be re-regulator.
SCR is mainly used for resistive load (electric filament incandescent, etc.), single-phase AC motor can also be, but not guaranteed can, other types of load, please confirm the buyer. Fuses are not omnipotent, there is reaction time, if the current is too large, in addition to burning the fuse, the module may also burn out.
Note that the plastic cover on the connector due to the installation of the shell, can not be completely opened, the screwdriver to point to the point of twist, the other open to be careful, too much effort to break off the lid
style: convenient and practical
color: as the picture shows
size: app 85*55*38 mm
package: 1 pcs module in a pack
SKU:BSX0002
Preview:

Material:Cloth metal fiber cotton
Size:18*60cm
Color:As show.
Feature:Suitable for parties, weddings, Christmas, etc.
Note:1.Please allow a few differs due to manual measurement, thanks.
2.Due to lighting effects, monitor's brightness , contrast settings etc,there could be some slight differences in the color tone of the pictures and the actual item.
Thank you for your understanding!
Package Includes:1 x Snowflake plaid fabric retractable doll ornaments

Material:Cloth metal fiber cotton
Size:18*60cm
Color:As show.
Feature:Suitable for parties, weddings, Christmas, etc.
Note:1.Please allow a few differs due to manual measurement, thanks.
2.Due to lighting effects, monitor's brightness , contrast settings etc,there could be some slight differences in the color tone of the pictures and the actual item.
Thank you for your understanding!
Package Includes:1 x Snowflake plaid fabric retractable doll ornaments

Material:Cloth metal fiber cotton
Size:18*60cm
Color:As show.
Feature:Suitable for parties, weddings, Christmas, etc.
Note:1.Please allow a few differs due to manual measurement, thanks.
2.Due to lighting effects, monitor's brightness , contrast settings etc,there could be some slight differences in the color tone of the pictures and the actual item.
Thank you for your understanding!
Package Includes:1 x Snowflake plaid fabric retractable doll ornaments

Description:100% new high quality
2 in 1 MEASUREMENT TOOL - Doubles as both a digital angle gauge and a protractor for measuring all your workshop angles, bevels, miters for crown, trim, molding, baseboard, squaring frames, general woodworking, setting miter saw blade angles and more.
MEASURE 360 DEGREES – Pivot allows full rotation in both directions so you can precisely measure inside or outside angles with ease at /-0.3 degree accuracy. Large LCD display digits make it easy to read.
Color as shown
Length:0-200mm (7inch)
Width:35mm / 1.38in
Material:ABS
Uses: RESET ZERO AT ANY POSITION for relative angles. To find relative angle, determine first angle then push the Zero button, then measure second angle for the difference. LCD display HOLD lets you freeze a displayed value before moving tool.
COMES COMPLETE – with protective case, long-life CR2032 3V battery
Packing: 1pcs 2 in1 Digital Protractor Angle Finder Ruler including battery

Description:
Christmas Gingerbread Man Chair Cover Hat Dining Seat Home Party Decoration Gift
Description:Made of flannelette, comfortable handle, durable stretch cover, easy to install, safe and firm, elastic
Machine washable, easy to clean
Decorate and protect the chair to prevent it from being scratched and bitten by children or pets
Suitable for restaurants, hotels, meetings, celebrations, Christmas parties, etc
Material: flannel
Color: red, green
Size: 48x56cm
Package list:1 * Christmas seat cover
note:1. Due to the difference in light and screen, the color of the project may be slightly different from the picture.
2. Due to manual measurement, please allow a difference of 0.5-2 cm.
Preview:

Description:
Christmas Gingerbread Man Chair Cover Hat Dining Seat Home Party Decoration Gift
Description:Made of flannelette, comfortable handle, durable stretch cover, easy to install, safe and firm, elastic
Machine washable, easy to clean
Decorate and protect the chair to prevent it from being scratched and bitten by children or pets
Suitable for restaurants, hotels, meetings, celebrations, Christmas parties, etc
Material: flannel
Color: red, green
Size: 48x56cm
Package list:1 * Christmas seat cover
note:1. Due to the difference in light and screen, the color of the project may be slightly different from the picture.
2. Due to manual measurement, please allow a difference of 0.5-2 cm.
Preview:

Description:100% Brand New and High quality.
* Material: Plastic Alloy
* The maximum output pressure: 70MPa
* Best shooting distance: 10 mm(approx)
* The maximum injection flow rate: 10 L/min
* Spray width: 5mm(approx)
* Color: as pictures show
Features:* This expanding foam gun can be used to inject foam into the gap of windows and doors
* Solid and durable, lightweight and compact
* Corrosion and wear resistant
* Ergonomic design means it's comfortable to use for long periods of time
* Ideal for filling, sealing and insulating small gaps
* Sprung trigger allows you to accurately control flow
* Easy to Clean
Package contents:1* Expanding Foam Sprayer

Description:
Characteristics:With a wide range of Input Voltage of 6 V to 40 V. the Converter Reducer can accurately adjust the Output Voltage and current.
The Efficiency can be up to 96% , measured in 20a, convert 24 V to 12 V.
75 V / 80A is designed with large double mos Tube.
Electrolytic capacitor high frequency of low resistance, Low resistance, stable output.
Wiring is convenient with these large Screw Terminals 30A current.
The Buck has 2 Module Heat Sink could improve the heat dissipation.
When there is a large difference between the input and Output Voltage, please reduce the power and current.
Specifications:Input Voltage: 5 V to 40 V DC (10 V to 40 V. it is suggested)
Output Voltage: 1.2 V to 36 V DC
Output Current: 20a (max.), 15th (suggested)
Efficiency: 95% (24 V to 12 V, 20a)
Ripple output: < = 50mV
Method: Wiring terminal
Short Circuit Protection: Self recovering (can not short Long)
Size: 60x53x27mm / 2.36x2.08x1.06 "
Positive output Vo :Vo: negative output
: Positive input
- negative input
HP: adjustment of Output Voltage
CC: adjustment of Output Current
Is to enable the low Output Voltage OF VOLTAGE level; suspension, High Voltage level is effective
When the input and output are common to Earth, Constant Voltage Output CV without load, Constant Current DC OUTPUT
Package includes:1x300 W 20a adjustable Constant Current Buck Converter Module of tension Reducer
Preview:

Description:
Description:
Sealey Brake Pipe Straightening Tool
Brake Pipe Straightener Designed for use on Automotive Applications
This Unique and Fast Design is Fast and Easy to Use
Suitable for 3/16" (4.76mm) Cupro-Nickel, Copper and Steel Pipe
Features Hole for Marker Pen
size:
2.2cm x 13.5cm
Package Included:
1 x Tubing modification tool
Preview:

Automatic Cable Wire Stripper Stripping Crimper Crimping Multi Plier /span>
Description:
100% new high quality
Accord with human body engineering design, perfectly match with the form of your gripping hand
Adopt the high quality alloy carbon steel, with 2-3 times longer life than ordinary steel;
Adopting the high density spring make you strip wire more comfortable, and not easy to fall.
Non-slip handle, bring more comfortable using
Color as shown
TMaterial:steel
Size
Maximum Opening:25mm
Handle length:80mm
Total length: 180mm
Uses: For your working
Packing:1 x Diagonal Cutting Pliers

Description:Description:100% new high quality.
Color: As the picture shows
Width:4mm
Length:6m
Thickness:0.14mm
Feature:Adjacent polished strip for composite resin and glass ionomer
Finishing and polishing of the adjacent surface of the filling material.
The clinician can see the polishing surface clearly.
They have the right curvature to get close to the prosthesis.
Saving time
The polishing system is a suitable modification and polishing system for composite resin and glass ionomer restorations.
Material: PET
Package: 1*Dental polishing strips
SPU:ZKQ1005
Preview:

Description:Description:100% new high quality.
Color: As the picture shows
Width:4mm
Length:6m
Thickness:0.14mm
Feature:Adjacent polished strip for composite resin and glass ionomer
Finishing and polishing of the adjacent surface of the filling material.
The clinician can see the polishing surface clearly.
They have the right curvature to get close to the prosthesis.
Saving time
The polishing system is a suitable modification and polishing system for composite resin and glass ionomer restorations.
Material: PET
Package: 1*Dental polishing strips
SPU:ZKQ1005
Preview:

description
Compatible Wire Gauge (AWG): 18-26AWG
Pin Spacing: 2.54mm (0.1")
Rated voltage: 250V
Rated current: 3A
Color: as picture shows
Quantity: 620pcs
Using
These work great with all your typical and breadboard style pin connectors and sockets
This kit comes with the most common dupont pin housings in addition to male and female crimp pins - all in a high quality case
Package included:200pcs x Female Crimp Pins
200pcs x Male Crimp Pins
10pcs x 2x6
10pcs x 2x5
10pcs x 2x4
10pcs x 2x3
10pcs x 2x2
20pcs x 1x6
20pcs x 1x5
20pcs x 1x4
20pcs x 1x3
40pcs x 1x2
50pcs x 1x1

Description:
Product Introduction:
This set of couplers offer you the best convenience to attach the manifold hoses onto the Auto/Car AC R134a system during the diagnosis, charging or evacuation working. Specail design is the advantage of this coupler connector, easy to install and use, beautiful and concise style is developed to get incisively and vividly. It can be connected with hoses quickly and easily. This pair is needed between the car AC service ports and the Manifold set or any service tools to do diagnosis/charging etc!
Features:1)Quick Couplers Red & Blue for Refrigerant R134a to be use in Automobile. Quick Coupling Connections sizes are 1/4" inch SAE Male Fitting
2)The tank adapter is 1/2" ACME female x 1/4" SAE male flare fitting for automobile a/c service
3)This adapter is use for connecting 1/4" SAE hose fitting to R134a automobile refrigeration tank
4)Quick, easy connect and disconnect high flow. High & Low Couplers Kit with colored knobs for easy identification
5)Reliable and safe for valve access to systems even at working pressure. Valve actuation eliminates possibility of refrigerant loss
Specification:
Blue: Low side quick connector/adapter (1/4" male flare straight)
Red: High side quick connector/adapter (1/4" male flare straight)
Length: 5cm
Package Content:
1x blue low side quick coupler
1x red high side quick coupler
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
Preview:

Description:
Specifications:
Made of aluminum alloy material, wear resistant, anti-oxidation and durable in use.
No need to reverse the body when measuring, just slide to mark the right and left 45 degree angle.
Clear standard scales, accurate and easy to read.
Fine polishing surface, comfortable in hand.
Professional design, easy to use.
Item Name: Angle Ruler
Material: Aluminum Alloy
Measuring Range: 150mm
Accuracy: 1mm
Angle: 45/90 Degree
Features: Multifunctional, Woodworking Tool, 45/90 Degree
Size: 17cm x 7.4cm x 6.5cm
Notes:
Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
Please allow slight dimension difference due to different manual measurement.
Package Includes:
1 x Angle Ruler
Preview:

Description:
How to use:
1. Press the power button to start the tester.
2. Voltage alert: If AC voltage is detected, the buzzer will beep and LED light will flash. The higher the AC voltage, the higher the frequency of beeps and flashes.
3. Flashlight: The built-in light is useful in dim conditions and it turns off automatically after 5 minutes to conserve energy.
4. Auto power off: Voltage tester will automatically power off after 3 minutes of no AC voltage detection.
5. Low battery power indicator: When the battery is low, the power indicator lights will flash 3 times, the buzzer will beep one time, and the tester pen will power off.
Power supply: 2 * AAA battery (not include)
The package includes:
1 * measuring pen
Preview:

Description
100% new high quality
Material: PE, LDPE
Color: as shown
Size: 17*30cm, 20*30cm, 20*35cm, 25*35cm
Uses: Garment bags, food bags, waterproof bags, general packaging, logistics packaging, courier bags
Characteristics
Made of high-quality materials for easy labeling, stamps and inks
Highly viscous sealing strip, securely packed
Excellent protection during shipment
Ideal for non-fragile items
Economical transportation methods are much cheaper than using corrugated boxes and mailing pipes
note:
1. Due to differences in display and lighting effects, the actual color of the item may differ slightly from the color displayed on the image. Thank you!
2. Due to manual measurement, please allow measurement deviation of 1-3cm
Package includes: 100PCS bag

Description
100% new high quality
Material: PE, LDPE
Color: as shown
Size: 17*30cm, 20*30cm, 20*35cm, 25*35cm
Uses: Garment bags, food bags, waterproof bags, general packaging, logistics packaging, courier bags
Characteristics
Made of high-quality materials for easy labeling, stamps and inks
Highly viscous sealing strip, securely packed
Excellent protection during shipment
Ideal for non-fragile items
Economical transportation methods are much cheaper than using corrugated boxes and mailing pipes
note:
1. Due to differences in display and lighting effects, the actual color of the item may differ slightly from the color displayed on the image. Thank you!
2. Due to manual measurement, please allow measurement deviation of 1-3cm
Package includes: 100PCS bag

Description:
Description:
100% Brand new and high quality
Brand new well made pink jacket and veil, lightweight and cool for hot weather.
Strong, tough cotton with elasticated cuffs and waist band, keep the bees out.
Popular round hat design, strong rings keep the bees well away from your face, great all round visibility.
Veil attached by a zipper and made from strong black net
One section pocket at the front.
Colour : Pink
Material: polyester cotton
Size : fit for most adults.
Suit shoulder width : Approx. 69cm
Sleeve length : Approx.53.5cm
Hat diameter :Approx. 42cm
Hat height:Approx. 15cm
Veil L x W: Apporx.20x 32cm
Package include:
1x Beekeeping Jacket
SKU:XP0200
Preview:

Description:100% brand new and high quality!
Item type:8Pcs/set Dental Oral Hygiene Kit
Material: Stainless steel
Scope of application: dental office, dental hospital
Specifications: Mouth mirror * 1, Cleaner * 1, Probe * 2, Resin filler * 2, Forceps * 1, Periodontal file * 1
size:As the picture show
1.Dental Mirror
Used to observe and target some hard-to-see areas behind teeth, it stays clear when breathing upon it.
2.Dental Tweezers
With pointy ends, used to pick out food debris or fishbone stuck in your teeth, it's easier to use than an ordinary bamboo toothpick.
3.Hammer Shaped Needle
Used to fix and test the looseness of the tooth during dental restoration.
4.Sickle Needle
Able to reach the periodontal pocket to strike off the potential subgingival calculus.
5.Sharp Needle
Used to clean all sides of tooth by scraping, including plaque and calculus which on adjacent sides.
6.Dental Sawtooth
Used to scrape off the stubborn plaque and dental calculus on tooth surface.
7.Probe
Used as a toothpick to remove food residues deposit in between the teeth and detect the position of the decayed tooth.
8.Hoe Dental Scale
Designed in the same angle but different orientations, this tartar remover can help you work on heavy tartar in different sides of your teeth and save more energy.
Packing included:8Pcs/set Dental Oral Hygiene Kit
Preview:

Description:Description
Rated Power: 3.7V
Standby current: 30uA
Adapter: 5V / 5mA
Rated current: 200mA
USB Rechargeable
Specifications:Size: 190*30.5*20.5mm
Color: Pink, Green
Material: Alloy steel Silicone
Features:Integrated handle, easy to grip.
Safe IPX6 waterproof, suitable for daily use.
High frequency vibration remover.
Physical remove dental calculus.
Medical quality material; high quality, easily clean tooth.
Clean dental calculus, tartar smoke, tea spot, etc
Adjustable 5 frequency level for different needed.
Humanized design. One key operation, easy to use.
Package Included:1 x Sonic Dental Scaler
1 x USB Charging Cable
1 X User manual(Chinese/English)
Notes:1.Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3cm deviation. Thanks!
Preview:

Description:Description
Rated Power: 3.7V
Standby current: 30uA
Adapter: 5V / 5mA
Rated current: 200mA
USB Rechargeable
Specifications:Size: 190*30.5*20.5mm
Color: Pink, Green
Material: Alloy steel Silicone
Features:Integrated handle, easy to grip.
Safe IPX6 waterproof, suitable for daily use.
High frequency vibration remover.
Physical remove dental calculus.
Medical quality material; high quality, easily clean tooth.
Clean dental calculus, tartar smoke, tea spot, etc
Adjustable 5 frequency level for different needed.
Humanized design. One key operation, easy to use.
Package Included:1 x Sonic Dental Scaler
1 x USB Charging Cable
1 X User manual(Chinese/English)
Notes:1.Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3cm deviation. Thanks!
Preview:

Description:product description
100% new quality
Material: Silicone
color: blue
Thickness: 4 (mm)
Size: about 33.7 * 22.7cm (m)
Anti-static coefficient: 1 x 10E12
☞ Features:Individual grid sections can place different components. You can use magnetic pads to mark part names and make them safer (not including magnetic pads). Anti-static and heat-resistant. Anti-corrosion, maintenance insulation, welding insulation. Can protect the maintenance platform. Can be washed directly with water.
☞ Note:Due to manual measurement, please allow 1-3cm error. Because the monitor is not calibrated, the color of the item shown in the picture may be slightly different on your computer monitor.
☞ Package includes:1pc x anti-static mat
skuFDT5954
Preview:

description:100% new high quality
Manual DIY assembly robot arm.
Easy to assemble.
Can control the grasping items after assembly.
Color as shown
Material: ABS & metal
Packing: 1 set x Screws
1 set x Assembled Accessories

Description:
Description:
1. Add boot voltage detection function
2. Automatic detection of NPN and PNP transistors, N -channel and P-channel MOSFET, diodes (including dual diode), thyristors, transistors, resistors and capacitors and other components
3. Automatic test out the pin element and displayed on the LCD
4. Can be detected to determine the transistor emitter forward bias voltage of the transistor, MOSFET protection diode and the amplification factor of the base
5. Measure the gate threshold voltage and gate capacitance of the MOSFET
6. 12864 lcd display
7. High test speed, valid component test: 2 seconds (except in the larger capacitor of large capacitance measurement also takes a long time, the measured time of one minute is normal)
8. One button operation, power-on test, get a key
9. Power consumption off mode: less than 20 nA of
10. Auto power off function to avoid unnecessary waste, saving battery power, improved battery life
Specification:
Resistor: 0.1ω-50Mω
Capacitor: 25pF-100000uF
Inductance: 0.01mH - 20H
Working power: DV-9V
Standby current: 0.02uA
Operating current: 25mA
Package included:
1 x LCR-T4 ESR Meter Transistor Tester
Preview:

Description:
Description:
1. Add boot voltage detection function
2. Automatic detection of NPN and PNP transistors, N -channel and P-channel MOSFET, diodes (including dual diode), thyristors, transistors, resistors and capacitors and other components
3. Automatic test out the pin element and displayed on the LCD
4. Can be detected to determine the transistor emitter forward bias voltage of the transistor, MOSFET protection diode and the amplification factor of the base
5. Measure the gate threshold voltage and gate capacitance of the MOSFET
6. 12864 lcd display
7. High test speed, valid component test: 2 seconds (except in the larger capacitor of large capacitance measurement also takes a long time, the measured time of one minute is normal)
8. One button operation, power-on test, get a key
9. Power consumption off mode: less than 20 nA of
10. Auto power off function to avoid unnecessary waste, saving battery power, improved battery life
Specification:
Resistor: 0.1ω-50Mω
Capacitor: 25pF-100000uF
Inductance: 0.01mH - 20H
Working power: DV-9V
Standby current: 0.02uA
Operating current: 25mA
Package included:
1 x LCR-T4 ESR Meter Transistor Tester
Preview:

description
1.Easy and convenient to use for wire connecting usage.
2.Assorted crimp terminals with transparent box for easy access.
3.Prevents corrosion for durable use.
color as shown
Each terminal features a thick tinned copper barrel that resist corrosion to hold the wire tight when crimped. Translucent heat shrink tubing provides high tensile strength and resist mechanical damage.
Quantity:20PCS: 2.8mm Female Insulated Terminals Red 22-16 Gauge AWG
20PCS: 2.8mm Male Insulated Terminals Red 22-16 Gauge AWG
20PCS: 4.8mm Female Insulated Terminals Red 22-16 Gauge AWG
20PCS: 4.8mm Male Insulated Terminals Red 22-16 Gauge AWG
20PCS: 6.3mm Female Insulated Terminals Red 22-16 Gauge AWG
20PCS: 6.3mm Male Insulated Terminals Red 22-16 Gauge AWG
20PCS: Crimp Spade Wire Connector 22-16AWG #8 19AMP Red Fork Terminal
20PCS: Crimp Spade Wire Connector 22-16AWG #8 19AMP Red Ring Terminal
20PCS: 4.8mm Female Insulated Terminals Blue 16-14 Gauge AWG
20PCS: 4.8mm Male Insulated Terminals Blue 16-14 Gauge AWG
20PCS: 6.3mm Female Insulated Terminals Blue 16-14 Gauge AWG
20PCS: 6.3mm Male Insulated Terminals Blue 16-14 Gauge AWG
20PCS: Crimp Spade Wire Connector 16-14AWG #4 19AMP Blue Fork Terminal
10PCS: 6.3mm Female Insulated Terminals Yellow 12-10 Gauge AWG
10PCS: 6.3mm Male Insulated Terminals Yellow 12-10 Ga
Using Whether you are working on your boat, vehicle, home or scientific project, our electrical crimp connector will ensure strong watertight seal to make sure everything bond correctly.
Package Included:280 x Assorted Crimp Terminals
1 x Storage Box

Description:
Description:
100% Brand New and High Quality
Ultra-small 802.11b/g/n Wi-Fi BT/BLE SoC module
- Low-power dual-core 32-bit CPU for application processors
- Up to 240MHz, up to 600 DMIPS
- Built-in 520 KB SRAM, external 4M PSRAM
- Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
- Support OV2640 and OV7670 cameras with built-in flash
- Support for images WiFI upload
-Support TF card
- Support multiple sleep modes
- Embedded Lwip and FreeRTOS
- Support STA/AP/STA AP working mode
- Support Smart Config/AirKiss One-click distribution network
- Support for serial local upgrade and remote firmware upgrade (FOTA)
Specifications:
The ESP32-CAM has a very competitive small-size camera module that can operate independently as a minimum system, measuring only 27*40.5*4.5mm, with deep sleep current and a minimum of 6mA.
ESP-32CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
ESP-32CAM is packaged in DIP and can be directly plugged into the backplane for quick production. It provides customers with a highly reliable connection method and is convenient for use in various IoT hardware terminals.
Package Included:
1 x ESP32-CAM Module
1 x Camera Module OV2640
Notes:
This product contains the OV2640 Camera Module. If you need to use the OV7670 camera, please purchase it separately.
Preview:

Features:
Top quality copper material, melting point up to 1083℃.
Good electrical conductivity and thermal conductivity.
200pcs solid copper sump plug washer set.
All contained in a compact and see through compartmented plastic case.
Great for sump plugs, water, fuel and hydraulic fittings.
A sump plug washer set to suit all types of engines be it Car, Marine, Generators, Machinery and Plant.
Specifications:
Brand new
Material: copper
Color: as picture shows
Box size: approx. 130x60x23mm
Size types: 9 (M5-M14)
Quantity: 200pcs
Size: (I/D x O/D x Depth)
M5*9*1 30pcs
M6*10*1 30pcs
M6*12*1 20pcs
M8*12*1 20pcs
M8*14*1 20pcs
M10*14*1 20pcs
M12*16*1 20pcs
M12*18*1.5 20pcs
M14*18*1 20pcs
Package included:
200pcs x copper washers
1pc x case
Note:
Please allow 1-2mm errors due to manual measurement
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same

Description:100% Brand New and High quality.
Cell Color:Clear & Matte translucent
Lid Color:White
Size:approx. 1.2x1.2x4.5cm(0.5x0.5x1.8inch)
Cell Volume:3.5ml
Spectral range:200-2500 Nm
Suitable for:all standard UV-VIS fluorescence spectrophotometers.
Optical bonding, suitable for neutral solution, acid-alkali-resistant organic solution, high temperature, low temperature, high pressure, imported quartz, high light transmission quality, 200-1500 wavelength are above 80% .
Item included:4 x Cuvette Cell
4 x Lid
1 x Package Case
Note:Please allow 1-2cm errors due to manual measurement
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same

Description:100% new high quality
2 in 1 MEASUREMENT TOOL - Doubles as both a digital angle gauge and a protractor for measuring all your workshop angles, bevels, miters for crown, trim, molding, baseboard, squaring frames, general woodworking, setting miter saw blade angles and more.
MEASURE 360 DEGREES – Pivot allows full rotation in both directions so you can precisely measure inside or outside angles with ease at /-0.3 degree accuracy. Large LCD display digits make it easy to read.
Color as shown
Length:0-200mm (7inch)
Width:35mm / 1.38in
Material:ABS
Uses: RESET ZERO AT ANY POSITION for relative angles. To find relative angle, determine first angle then push the Zero button, then measure second angle for the difference. LCD display HOLD lets you freeze a displayed value before moving tool.
COMES COMPLETE – with protective case, long-life CR2032 3V battery
Packing: 1pcs 2 in1 Digital Protractor Angle Finder Ruler including battery

Product Description
1.8 Degree 42mm NEMA17 2 Phase 4-wire Stepper Motor For 3D Printer or CNC
Features:
100% brand new and high quality
2 phase NEMA17 42mm 4-wire stepper motor
Fits for 3D printers, monitor equipment, medical machinery, textile machinery,
packaging machinery, stage lighting and so on .
Wiring: Black Green A , A- red and Blue B , B-,.
Adapter Drive JK0220 (drive voltage DC12V 36V, AC12V 24V, current range 0.3A 2.0A).
Specifications
Model: JK42HS40-1704
phase : 2
Material: Metal
Color: As picture shows
Size: 42*42*40 mm
Rated voltage: 12-24V
Power: 5W
Current: 1.7A
Rated Speed: 0-1500 RPM
Rated torque: 0.42 NM
Step angel:1.8°
Temp. rise: max 80 ℃
Ambient temp.: -20 ℃ -50 ℃
Insulation resistance:100MΩmin.(500V DC)
Dielectric strength: 500VAC for 1 minute
Shaft Radial Play: 0.02Max. (450g-load)
Shaft Axial Play: 0.08Max. (450g-load)
Max. radial force: 28N (20mm from the flange)
Max. axial force: 10N
Electrical specification
Motor length: 40 (L) mm,34(L)mm,48(L)mm
Rated current:1.68A
Resistence per phase:1.5Ω
Inductance per phase:2.3mH
Holding torque:4.2 kg.cm
# of leads No.: 4
Detent torque:150 g.cm
Rotor interia: 54 g.cm
Mass:0.40kg
Package included:
1X 2 Phase 4-Wire Stepper Motor

Product Description
1.8 Degree 42mm NEMA17 2 Phase 4-wire Stepper Motor For 3D Printer or CNC
Features:
100% brand new and high quality
2 phase NEMA17 42mm 4-wire stepper motor
Fits for 3D printers, monitor equipment, medical machinery, textile machinery,
packaging machinery, stage lighting and so on .
Wiring: Black Green A , A- red and Blue B , B-,.
Adapter Drive JK0220 (drive voltage DC12V 36V, AC12V 24V, current range 0.3A 2.0A).
Specifications
Model: JK42HS40-1704
phase : 2
Material: Metal
Color: As picture shows
Size: 42*42*40 mm
Rated voltage: 12-24V
Power: 5W
Current: 1.7A
Rated Speed: 0-1500 RPM
Rated torque: 0.42 NM
Step angel:1.8°
Temp. rise: max 80 ℃
Ambient temp.: -20 ℃ -50 ℃
Insulation resistance:100MΩmin.(500V DC)
Dielectric strength: 500VAC for 1 minute
Shaft Radial Play: 0.02Max. (450g-load)
Shaft Axial Play: 0.08Max. (450g-load)
Max. radial force: 28N (20mm from the flange)
Max. axial force: 10N
Electrical specification
Motor length: 40 (L) mm,34(L)mm,48(L)mm
Rated current:1.68A
Resistence per phase:1.5Ω
Inductance per phase:2.3mH
Holding torque:4.2 kg.cm
# of leads No.: 4
Detent torque:150 g.cm
Rotor interia: 54 g.cm
Mass:0.40kg
Package included:
1X 2 Phase 4-Wire Stepper Motor

Product Description
1.8 Degree 42mm NEMA17 2 Phase 4-wire Stepper Motor For 3D Printer or CNC
Features:
100% brand new and high quality
2 phase NEMA17 42mm 4-wire stepper motor
Fits for 3D printers, monitor equipment, medical machinery, textile machinery,
packaging machinery, stage lighting and so on .
Wiring: Black Green A , A- red and Blue B , B-,.
Adapter Drive JK0220 (drive voltage DC12V 36V, AC12V 24V, current range 0.3A 2.0A).
Specifications
Model: JK42HS40-1704
phase : 2
Material: Metal
Color: As picture shows
Size: 42*42*40 mm
Rated voltage: 12-24V
Power: 5W
Current: 1.7A
Rated Speed: 0-1500 RPM
Rated torque: 0.42 NM
Step angel:1.8°
Temp. rise: max 80 ℃
Ambient temp.: -20 ℃ -50 ℃
Insulation resistance:100MΩmin.(500V DC)
Dielectric strength: 500VAC for 1 minute
Shaft Radial Play: 0.02Max. (450g-load)
Shaft Axial Play: 0.08Max. (450g-load)
Max. radial force: 28N (20mm from the flange)
Max. axial force: 10N
Electrical specification
Motor length: 40 (L) mm,34(L)mm,48(L)mm
Rated current:1.68A
Resistence per phase:1.5Ω
Inductance per phase:2.3mH
Holding torque:4.2 kg.cm
# of leads No.: 4
Detent torque:150 g.cm
Rotor interia: 54 g.cm
Mass:0.40kg
Package included:
1X 2 Phase 4-Wire Stepper Motor

Description:
Product Features
Low-power dual-core 32-bit CPU for application processors
Main frequency up to 240MHz, computing power up to 600 DMIPS
Built-in 520 KB SRAM, external 4M PSRAM
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
Support OV2640 and OV7670 cameras, built-in flash
Support image WiFi upload
Support TF card
Support multiple sleep modes
Embedded Lwip and FreeRTOS
Support STA/AP/STA AP working mode
Support Smart Config/AirKiss one-click distribution network
Support secondary development
The ESP32-CAM has a very competitive small form factor camera module that can operate independently as a minimum system with a footprint of only 27*40.5*4.5mm and a deep sleep current of up to 6mA.
ESP-32CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
ESP-32CAM is packaged in DIP and can be directly plugged into the backplane for quick production. It provides customers with a highly reliable connection method and is convenient for use in various IoT
hardware terminals.
Package Include:
1* ESP32-CAM module
1* Camera Module OV2640 2MP
Preview:

Description:
Christmas Penguin Chair Covers Hat Dining Seats Party Decor Home Gift
Description:Made of flannelette, comfortable handle, durable stretch cover, easy to install, safe and firm, elastic
Machine washable, easy to clean
Decorate and protect the chair to prevent it from being scratched and bitten by children or pets
Suitable for restaurants, hotels, meetings, celebrations, Christmas parties, etc
Material: flannel
Color: Red
Size: 74x50cm
Package list:1 * Christmas seat cover
note:1. Due to the difference in light and screen, the color of the project may be slightly different from the picture.
2. Due to manual measurement, please allow a difference of 0.5-2 cm.
Preview:

Beekeeping Beekeeper Cowboy Hat Mosquito Bee Insect Net Veil Face Head Protector
Description:
Cowboy hat design, practical and beautiful appearance.
Durable high definition fire prevention mesh at front, humanized design anti off string at bottom to ensure not easy to fall off.
Not only can effectively prevent from bees biting, but also is suitable for fishing, hiking, hunting and so on.
Specification:
Material: Mesh
Size:one size fits all
Color: As the picture show
Notice:
Due to the different monitor and light effect, the actual color maybe a slight different from the picture color
Please allow 1-3cm differs due to manual measurement
Package including
1 x Beekeeping Hat
Preview:

300pcs Mixed Dental Interdental Composite Contoured Wood Wooden Wedges matrices
Description
Condition: 100% brand new & high quality
Weight: 45g
Material: Plastic
Features: Special design makes the wedge easier to enter the gap, the round tip better protects the gum from damage, and the tail square design makes it easier to grip.
Note:
There may be some subtle differences between the color of the image and the actual product.
Thanks to the manual measurement, please allow 1-2mm difference, thank you.
Package Included:
1 box 300 pieces (6 mixed sizes)
Preview:

Description:100% Brand New and High quality.
Length: approx. 145mm
Height: approx. 30mm
Width: approx. 94mm
Special feature: connector
R22 retention control valve:Blue outer filament 1/4", inner filament 1/4"
R410 retention control valve: Red outer filament 1/4", inner filament 5/16"
Feature:Fine workmanship and reliable.
High strength and hardness.
Application: air contioner system.
Air conditioning charging valve
Package included:1 xR22 retention control valve
1 xR410 retention control valve
Note:Please allow 0-1cm errors due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.

Description:
Description:
Sealey Brake Pipe Straightening Tool
Brake Pipe Straightener Designed for use on Automotive Applications
This Unique and Fast Design is Fast and Easy to Use
Suitable for 3/16" (4.76mm) Cupro-Nickel, Copper and Steel Pipe
Features Hole for Marker Pen
size:
2.2cm x 13.5cm
Package Included:
1 x Tubing modification tool
Preview:

Fire Blanket 1 x 1 Meter Fire Blanket Fiber Glass House Caravan Campers
product description
100% new quality
Description: This fire blanket features glass fiber cloth quenching and fire spread, emergency survival military style blankets, fiberglass blankets are flame retardant, it is cool, glass fiber cloth, excellent quenching effect.
Scope of application: offices, warehouses, ships, cars, buildings, houses, kitchens, restaurants, entertainment venues, etc.
Material: Fiberglass cloth
color: white
Instructions:
1. Fix or place the fire blanket on a wall that is visible and quickly accessible or in a drawer.
2. When the fire house, quickly remove the blanket, holding two black pull the two hands.
3. Gently shake the fire blanket, as a shield-like in your hand
4. The fire blanket gently covered in the flame, while cutting off the power or origin.
5. Fire blankets continue to cover the objects on fire and take active measures to extinguish fire until the objects are completely extinguished.
6. When the fire object is extinguished, it should be treated as non-burnable garbage after the fire blanket is cooled down.
7. If the person is on fire, shake the blanket, completely wrapped in the fire who put out the fire source, and quickly call emergency number
Size: 1 * 1M (L * W)
Package Included:
1PCxFire blanket
skuFHB8805
Preview:

Description:
Description:Material: PU
Size: 11*19*2.5CM
Color: as shown
Note:1. As we all know, different computers display colors in different ways, and the actual project colors may be slightly different from the picture below.
2. Please ignore the size. Sometimes the scale may be narrower than we described. China is usually smaller than Europe and America. Therefore, please keep a distance of 1-3 cm.
3. If you encounter any difficulties in choosing the size, please feel free to contact us. We will provide you with some suggestions, but only for reference.
We can accept mixed sales, color and size orders. The higher the number, the greater the discount.
The package includes:1 pc business card book
Preview:

Description:
Characteristics:Model Number: M118A
Display: 6000 counts
DIY Supplies: Electric
Operating Mode: Automatic
DC Voltage Range: 0.5V ~ 600V
AC Voltage Range: 0.5V ~ 600V
AC Current Range: 20mA / 10A
DC Current Range: 20mA / 10A
Measuring Resistance Range: 0.1 ~ 50 Ohm
Screen type: Digital Display
Flash Light, Back light, Auto-power Off
NCV test, TRUE-RMS, Data Hold
Sample Rate: 3 times per second
Packing List:1 * Digital Multimeter
1 * test leads
1 * English manual
Preview:

Description:
A3002 Digital Multimeter 4000 Counts Pen Type with Non Contact ACV/DCV Electric Handheld Tester
Features:Measuring AC / DC voltage
Measuring resistance
Test diode
Buzzer continuity test
Measuring capacitance
Non-contact voltage detection
Alternating current
Specification:DC voltage:400mV/4V/40V/400V/600V
AC voltage: 4V/40V/400V/600V
Resistance(OMH): 400/4k/40 k/400k/4M/40M
Diode: 4V
Buzzer on and off: 400(OMH)
DC current: 40mA/200mA
AC current: 40mA/200mA
Capacitancel 4nF/40nF/400nF/4uF/40uF/400uF/4mF
Package:1 *A3002 pen multimeter
1 * Table line
1 * Instruction
Preview:

Notice:Please check if the parts of your car are the same as our pictures.
Due to light and screen difference, the item's color may be slightly different from the pictures.
If have any question please contact us, thanks!
Description:Fit for: For Dodge Challenger/Charger 2015-2019
Color: Red
Material: High-Quality Aluminum Alloy
Package Include: 3pcs
100% Brand New with High Quality
Provide a highly class and fashional style for your car
Installation and introduction:DIY item --- Easy to install.
Pls use alcohol or agent to clean the position of the installation (to make sure it without the grease.Wax or dust etc.)
Pls ensure the position of installation can be completely fit the case before install, (Note: if there any questions or misfit, please contact us)
Rive the strong double-sided adhesive of the back, if meet the case of a relatively low temperature, please heating it via the hair dryer or lighter.
According to the comparison stick up it and press about 1-2 minutes (Note:do not wash your car in 24 hours, the adhesive should be fixed after 12 hours )

Description:
Description:Material: paper
Size: 14*26cm
Color: as shown
Note:1. As we all know, different computers display colors in different ways, and the actual project colors may be slightly different from the picture below.
2. Please ignore the size. Sometimes the scale may be narrower than we described. China is usually smaller than Europe and America. Therefore, please keep a distance of 1-3 cm.
3. If you encounter any difficulties in choosing the size, please feel free to contact us. We will provide you with some suggestions, but only for reference.
We can accept mixed sales, color and size orders. The higher the number, the greater the discount.
The package includes:1 pc desk calendar
Preview: