Kategóriák

Coupling GDT 2 pcs W/ Wrench High precision Rigid Stepper motor Durable
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*100% brand new and high quality
*Widely used in 3D printers for transmission in hardware, molds and machinery.
*Made of high-quality aluminum alloy material, light weight, oxidation resistance, corrosion resistance, fine CNC cutting, beautiful appearance, high precision and long service life.
*Suitable for connecting two shafts of different diameters, or connecting motor shafts or connecting shafts of different diameters.
Two screws can be used between the transmission parts to make this model remote control marine propeller shaft and motor power.
Specifications:
*Material: Aluminum alloy
*color: blue
*Function: It is used to connect the drive shaft and the model motor, which can transmit the driving force accurately and coaxially.
*Usage: Usually used for the shaft of the gearbox movement, widely used in DIY models, such as RC models, cars or boats, etc., as a connector to connect different components.
Package Contents:
2 *Coupling
1 * Wrench
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

5V 38Khz IR Transmitter Infrared Emitter Sensor Modules Accessories For Arduino
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*IR is widely used for remote control. With this IR transmitter, if you have the correct decoder, the project for Arduino can send commands to any IR remote receiver.
*So, it's also easy to make your own infrared controller using an infrared receiver.
*38KHz Infrared Transmitter Sensor Pin Definition: (1) Output (2) Vcc(3) GND
*Based on 38KHz infrared emitter sensor
*Can be used for remote control
*Compatible with for Wrobot Digital 38KHz infrared receiver
*Applicable to all platforms including for Arduino / 51 / AVR / ARM
Specifications:
*Power: 5V
*Interface: Number
*Modulation frequency: 38Khz
*Pin Description: (1) Output (2) Vcc (3) GND
*Optional Quantities 1pc/2pcs/5pcs/10pcs
Package Contents(Optional):
Package Contents 1:
1*Sensor
Package Contents 2:
2*Sensor
Package Contents 3:
5*Sensor
Package Contents 3:
10*Sensor
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

5V 38Khz IR Transmitter Infrared Emitter Sensor Modules Accessories For Arduino
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*IR is widely used for remote control. With this IR transmitter, if you have the correct decoder, the project for Arduino can send commands to any IR remote receiver.
*So, it's also easy to make your own infrared controller using an infrared receiver.
*38KHz Infrared Transmitter Sensor Pin Definition: (1) Output (2) Vcc(3) GND
*Based on 38KHz infrared emitter sensor
*Can be used for remote control
*Compatible with for Wrobot Digital 38KHz infrared receiver
*Applicable to all platforms including for Arduino / 51 / AVR / ARM
Specifications:
*Power: 5V
*Interface: Number
*Modulation frequency: 38Khz
*Pin Description: (1) Output (2) Vcc (3) GND
*Optional Quantities 1pc/2pcs/5pcs/10pcs
Package Contents(Optional):
Package Contents 1:
1*Sensor
Package Contents 2:
2*Sensor
Package Contents 3:
5*Sensor
Package Contents 3:
10*Sensor
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

5V 38Khz IR Transmitter Infrared Emitter Sensor Modules Accessories For Arduino
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*IR is widely used for remote control. With this IR transmitter, if you have the correct decoder, the project for Arduino can send commands to any IR remote receiver.
*So, it's also easy to make your own infrared controller using an infrared receiver.
*38KHz Infrared Transmitter Sensor Pin Definition: (1) Output (2) Vcc(3) GND
*Based on 38KHz infrared emitter sensor
*Can be used for remote control
*Compatible with for Wrobot Digital 38KHz infrared receiver
*Applicable to all platforms including for Arduino / 51 / AVR / ARM
Specifications:
*Power: 5V
*Interface: Number
*Modulation frequency: 38Khz
*Pin Description: (1) Output (2) Vcc (3) GND
*Optional Quantities 1pc/2pcs/5pcs/10pcs
Package Contents(Optional):
Package Contents 1:
1*Sensor
Package Contents 2:
2*Sensor
Package Contents 3:
5*Sensor
Package Contents 3:
10*Sensor
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Capacitive Soil Humidity Hygrometer Moisture Detection-Sensor Module With Wire
Features:
*100% brand new and high quality
*Includes an on-board voltage regulator which gives it an operating voltage range of 3.3 ~ 5.5V.
*Measures soil moisture levels by capacitive sensing.
*Insert it into soil and impress your friends with the real-time soil moisture data.
*Supports 3-pin gravity sensor interface.
*Used for Garden plants, moisture detection, intelligent agriculture.
*Compatible with DFRobot 3-pin "Gravity" interface, which can be directly connected to the Gravity I/O expansion shield.
*Fine workmanship and good performance.
*Durable and convenient to use.
*Analog output.
Specifications:
*Size: 98*23mm(Approx)
*Operating Voltage: 3.3 ~ 5.5 VDC
*Output Voltage: 0 ~ 3.0 VDC
*Interface: PH2.54-3P
Package Contents:
1 x Capacitive Soil Moisture Sensor
1 x Analog Sensor Cable Wire
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Carbon Brushes 10 Pair Replacement Durable Industrial Quality Replaces
Item Details:
*100% Brand new and high quality
*Made of high quality materials, durable and practical
*Fits for Bosch GWS 20-230 H angle grinder
*Color: As Pictures Show
*Size:6.3 X 16 X 22mm
Package Contents:
10pcs Carbon Brushes
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

2x/kit Angle Grinder Motor Carbon Brush Replacement Spare Parts 12mm*8mm*5mm New
Product Details:
*100% brand new and high quality
*Made of high-quality materials, durable
*Carbon fiber brushes are one of the most important components in power tools (such as electric drills).
*Brush wear is usually the cause of poor motor operation.
*Replacement of brushes can repair intermittent motors.
*The new brush can restore the electric brake of the motor.
*Material: carbon and metal
*Size: 12mm x 8mm x 5mm
Package list:
2*Carbon brush
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Stepper Motor Damper Reprap Isolator Parts Components 5pcs Portable New
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* These dampers will fit for NEMA 17-sized stepper motors, typically used for 3d printers and other CNC types of machinery.
* Reduce vibration transmission to the printer frame
* Greatly reduces heat transfer from thermally running motors to plastic frame components
* Reduce the resonance of the motor, reduce the rattling and noise from the printer
* Laser cut enables perfect hole alignment and fits for NEMA 17 hole spacing.
Specification:
* Model: for Nema 17 Step Damper
* Material: Cork
* Size: 42mm x 42mm(Approx.)
* Thickness: 3mm(Approx.)
Package Contents:
5 * 3MM Step Dampers
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Tool Carbon Motor Brush Miter Saw 2 Pack Carbon Motor Brushes Hot Sale
Features:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance, long life
*Precise manufacturing, quality assurance
*Buy once, use for a long time.
*Fine workmanship and long service life.
* Stable characteristics and high reliability.
*Carbon fiber brushes are one of the most important components in power tools (such as electric drills).
*Brush wear is usually the cause of poor motor operation.
*Replacement of brushes can repair intermittent motors.
*The new electric brush can restore the electric brake of the motor.
*Note: Do not polish or modify the product.
*Suitable for DW718 DW718 / DWS780 / DW717
Specifications:
*Main color: as shown
*Quantity: 2*Carbon brush
*Material: carbon, metal
Package contents:
2*Carbon brush
Tips:
Conversion: 1inch = 2.54cm, 1cm = 0.393inches
All pictures are professional colors, but due to different ambient light and display device settings, there may be some deviations between the pictures you see and the project itself. Please understand.
The data is manually measured, there may be some deviations, but it does not affect the use
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

For Bosch GWS 20-230 H Angle Grinder Carbon Brushes Set 10 Pair Industrial
Item Details:
*100% Brand new and high quality
*Made of high quality materials, durable and practical
*Fits for Bosch GWS 20-230 H angle grinder
*Color: As Pictures Show
*Size:6.3 X 16 X 22mm
Package Contents:
10pcs Carbon Brushes
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Carbon Motor Brush Carbon Motor Brushes Compatible For Dewalt DW718/DWS780/DW717
Features:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance, long life
*Precise manufacturing, quality assurance
*Buy once, use for a long time.
*Fine workmanship and long service life.
* Stable characteristics and high reliability.
*Carbon fiber brushes are one of the most important components in power tools (such as electric drills).
*Brush wear is usually the cause of poor motor operation.
*Replacement of brushes can repair intermittent motors.
*The new electric brush can restore the electric brake of the motor.
*Note: Do not polish or modify the product.
*Suitable for DW718 DW718 / DWS780 / DW717
Specifications:
*Main color: as shown
*Quantity: 2*Carbon brush
*Material: carbon, metal
Package contents:
2*Carbon brush
Tips:
Conversion: 1inch = 2.54cm, 1cm = 0.393inches
All pictures are professional colors, but due to different ambient light and display device settings, there may be some deviations between the pictures you see and the project itself. Please understand.
The data is manually measured, there may be some deviations, but it does not affect the use
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Abrasion resistance Rubber timing belt Heat resistance Oil resistance Best Nice
Feature:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*It has the characteristics of good dynamic bending performance, good crack resistance, excellent ozone performance, aging resistance, heat resistance, oil resistance, abrasion resistance, etc.
*When purchasing, pay attention to the clean surface of the product, the belt is not twisted, and the teeth are full.
*It is strictly forbidden to bend and damage the frame material and affect the strength of the belt.
*It is strictly forbidden to scratch the belt to avoid early damage to the belt.
*Try to avoid long-term contact with oil and water, and avoid contact with chemicals.
*When replacing the timing belt, the tension of the belt must be reduced to a minimum before taking it out. It is strictly forbidden to use non-professional tools to pry down the timing belt when there is high tension.
Specifications:
*Material: Tooth: Neoprene Belt back: Neoprene Tensile layer: Glass fiber Covering layer: High elastic nylon canvas
*Performance: Tensile strength≥80N/mm Reference force 60N/mm (elongation ≤4% ) Hardness: 75±5
*Width: 8/10/12/15/18/20mm
*Quantity: 2
Package list:
2*belt
Tips:Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Abrasion resistance Rubber timing belt Heat resistance Oil resistance Best Nice
Feature:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*It has the characteristics of good dynamic bending performance, good crack resistance, excellent ozone performance, aging resistance, heat resistance, oil resistance, abrasion resistance, etc.
*When purchasing, pay attention to the clean surface of the product, the belt is not twisted, and the teeth are full.
*It is strictly forbidden to bend and damage the frame material and affect the strength of the belt.
*It is strictly forbidden to scratch the belt to avoid early damage to the belt.
*Try to avoid long-term contact with oil and water, and avoid contact with chemicals.
*When replacing the timing belt, the tension of the belt must be reduced to a minimum before taking it out. It is strictly forbidden to use non-professional tools to pry down the timing belt when there is high tension.
Specifications:
*Material: Tooth: Neoprene Belt back: Neoprene Tensile layer: Glass fiber Covering layer: High elastic nylon canvas
*Performance: Tensile strength≥80N/mm Reference force 60N/mm (elongation ≤4% ) Hardness: 75±5
*Width: 8/10/12/15/18/20mm
*Quantity: 2
Package list:
2*belt
Tips:Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Abrasion resistance Rubber timing belt Heat resistance Oil resistance Best Nice
Feature:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*It has the characteristics of good dynamic bending performance, good crack resistance, excellent ozone performance, aging resistance, heat resistance, oil resistance, abrasion resistance, etc.
*When purchasing, pay attention to the clean surface of the product, the belt is not twisted, and the teeth are full.
*It is strictly forbidden to bend and damage the frame material and affect the strength of the belt.
*It is strictly forbidden to scratch the belt to avoid early damage to the belt.
*Try to avoid long-term contact with oil and water, and avoid contact with chemicals.
*When replacing the timing belt, the tension of the belt must be reduced to a minimum before taking it out. It is strictly forbidden to use non-professional tools to pry down the timing belt when there is high tension.
Specifications:
*Material: Tooth: Neoprene Belt back: Neoprene Tensile layer: Glass fiber Covering layer: High elastic nylon canvas
*Performance: Tensile strength≥80N/mm Reference force 60N/mm (elongation ≤4% ) Hardness: 75±5
*Width: 8/10/12/15/18/20mm
*Quantity: 2
Package list:
2*belt
Tips:Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Abrasion resistance Rubber timing belt Heat resistance Oil resistance Best Nice
Feature:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*It has the characteristics of good dynamic bending performance, good crack resistance, excellent ozone performance, aging resistance, heat resistance, oil resistance, abrasion resistance, etc.
*When purchasing, pay attention to the clean surface of the product, the belt is not twisted, and the teeth are full.
*It is strictly forbidden to bend and damage the frame material and affect the strength of the belt.
*It is strictly forbidden to scratch the belt to avoid early damage to the belt.
*Try to avoid long-term contact with oil and water, and avoid contact with chemicals.
*When replacing the timing belt, the tension of the belt must be reduced to a minimum before taking it out. It is strictly forbidden to use non-professional tools to pry down the timing belt when there is high tension.
Specifications:
*Material: Tooth: Neoprene Belt back: Neoprene Tensile layer: Glass fiber Covering layer: High elastic nylon canvas
*Performance: Tensile strength≥80N/mm Reference force 60N/mm (elongation ≤4% ) Hardness: 75±5
*Width: 8/10/12/15/18/20mm
*Quantity: 2
Package list:
2*belt
Tips:Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Abrasion resistance Rubber timing belt Heat resistance Oil resistance Best Nice
Feature:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*It has the characteristics of good dynamic bending performance, good crack resistance, excellent ozone performance, aging resistance, heat resistance, oil resistance, abrasion resistance, etc.
*When purchasing, pay attention to the clean surface of the product, the belt is not twisted, and the teeth are full.
*It is strictly forbidden to bend and damage the frame material and affect the strength of the belt.
*It is strictly forbidden to scratch the belt to avoid early damage to the belt.
*Try to avoid long-term contact with oil and water, and avoid contact with chemicals.
*When replacing the timing belt, the tension of the belt must be reduced to a minimum before taking it out. It is strictly forbidden to use non-professional tools to pry down the timing belt when there is high tension.
Specifications:
*Material: Tooth: Neoprene Belt back: Neoprene Tensile layer: Glass fiber Covering layer: High elastic nylon canvas
*Performance: Tensile strength≥80N/mm Reference force 60N/mm (elongation ≤4% ) Hardness: 75±5
*Width: 8/10/12/15/18/20mm
*Quantity: 2
Package list:
2*belt
Tips:Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Abrasion resistance Rubber timing belt Heat resistance Oil resistance Best Nice
Feature:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*It has the characteristics of good dynamic bending performance, good crack resistance, excellent ozone performance, aging resistance, heat resistance, oil resistance, abrasion resistance, etc.
*When purchasing, pay attention to the clean surface of the product, the belt is not twisted, and the teeth are full.
*It is strictly forbidden to bend and damage the frame material and affect the strength of the belt.
*It is strictly forbidden to scratch the belt to avoid early damage to the belt.
*Try to avoid long-term contact with oil and water, and avoid contact with chemicals.
*When replacing the timing belt, the tension of the belt must be reduced to a minimum before taking it out. It is strictly forbidden to use non-professional tools to pry down the timing belt when there is high tension.
Specifications:
*Material: Tooth: Neoprene Belt back: Neoprene Tensile layer: Glass fiber Covering layer: High elastic nylon canvas
*Performance: Tensile strength≥80N/mm Reference force 60N/mm (elongation ≤4% ) Hardness: 75±5
*Width: 8/10/12/15/18/20mm
*Quantity: 2
Package list:
2*belt
Tips:Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

1 Set Capacitive Soil Humidity Hygrometer Moisture Detection Sensor Module Wire
Features:
*100% brand new and high quality
*Includes an on-board voltage regulator which gives it an operating voltage range of 3.3 ~ 5.5V.
*Measures soil moisture levels by capacitive sensing.
*Insert it into soil and impress your friends with the real-time soil moisture data.
*Supports 3-pin gravity sensor interface.
*Used for Garden plants, moisture detection, intelligent agriculture.
*Compatible with DFRobot 3-pin "Gravity" interface, which can be directly connected to the Gravity I/O expansion shield.
*Fine workmanship and good performance.
*Durable and convenient to use.
*Analog output.
Specifications:
*Size: 98*23mm(Approx)
*Operating Voltage: 3.3 ~ 5.5 VDC
*Output Voltage: 0 ~ 3.0 VDC
*Interface: PH2.54-3P
Package Contents:
1 x Capacitive Soil Moisture Sensor
1 x Analog Sensor Cable Wire
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Carbon brush Set Tool Part.Replacement Practical Useful Durable Industrial
Details:
*100% brand new and high quality
*Color: As Pictures Show
*Carbon brush cover diameter is about 19mm (see pictures for details)
*For Makita DPJ180RMJ DPJ180Z DGA452RMJ BUC122RFE BUC121RFE BPJ180Z BPJ180RFE BPJ140Z BPJ140RFE BGA452SFE BGA452RFE3 BGA452RFE 8443DWDE 6343DWDE 6343DWBE DGA452 DGA450 BUC122 BUC121 BPJ180 BPJ140 BHP460 BDF460 BGA452 BGA450 BDF460 8443D 6343D 6347D DGA402 DUC121RFE DUC122 DGA452RF
Package Contents:
1 Pair of Carbon brushes
1 Pair Carbon brush covers
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Carbon and metal Carbon brush Angle Grinder Carbon brush Replacement Spare parts
Product Details:
*100% brand new and high quality
*Made of high-quality materials, durable
*Carbon fiber brushes are one of the most important components in power tools (such as electric drills).
*Brush wear is usually the cause of poor motor operation.
*Replacement of brushes can repair intermittent motors.
*The new brush can restore the electric brake of the motor.
*Material: carbon and metal
*Size: 12mm x 8mm x 5mm
Package list:
2*Carbon brush
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Abrasion resistance Rubber timing belt High quality Oil resistance Hot sale Best
Feature:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*It has the characteristics of good dynamic bending performance, good crack resistance, excellent ozone performance, aging resistance, heat resistance, oil resistance, abrasion resistance, etc.
*When purchasing, pay attention to the clean surface of the product, the belt is not twisted, and the teeth are full.
*It is strictly forbidden to bend and damage the frame material and affect the strength of the belt.
*It is strictly forbidden to scratch the belt to avoid early damage to the belt.
*Try to avoid long-term contact with oil and water, and avoid contact with chemicals.
*When replacing the timing belt, the tension of the belt must be reduced to a minimum before taking it out. It is strictly forbidden to use non-professional tools to pry down the timing belt when there is high tension.
Specifications:
*Material: Tooth: Neoprene Belt back: Neoprene Tensile layer: Glass fiber Covering layer: High elastic nylon canvas
*Performance: Tensile strength≥80N/mm Reference force 60N/mm (elongation ≤4% ) Hardness: 75±5
*Width: 8/10/12/15/18/20mm
*Quantity: 2
Package list:
2*belt
Tips:Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Abrasion resistance Rubber timing belt High quality Oil resistance Hot sale Best
Feature:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*It has the characteristics of good dynamic bending performance, good crack resistance, excellent ozone performance, aging resistance, heat resistance, oil resistance, abrasion resistance, etc.
*When purchasing, pay attention to the clean surface of the product, the belt is not twisted, and the teeth are full.
*It is strictly forbidden to bend and damage the frame material and affect the strength of the belt.
*It is strictly forbidden to scratch the belt to avoid early damage to the belt.
*Try to avoid long-term contact with oil and water, and avoid contact with chemicals.
*When replacing the timing belt, the tension of the belt must be reduced to a minimum before taking it out. It is strictly forbidden to use non-professional tools to pry down the timing belt when there is high tension.
Specifications:
*Material: Tooth: Neoprene Belt back: Neoprene Tensile layer: Glass fiber Covering layer: High elastic nylon canvas
*Performance: Tensile strength≥80N/mm Reference force 60N/mm (elongation ≤4% ) Hardness: 75±5
*Width: 8/10/12/15/18/20mm
*Quantity: 2
Package list:
2*belt
Tips:Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Abrasion resistance Rubber timing belt High quality Oil resistance Hot sale Best
Feature:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*It has the characteristics of good dynamic bending performance, good crack resistance, excellent ozone performance, aging resistance, heat resistance, oil resistance, abrasion resistance, etc.
*When purchasing, pay attention to the clean surface of the product, the belt is not twisted, and the teeth are full.
*It is strictly forbidden to bend and damage the frame material and affect the strength of the belt.
*It is strictly forbidden to scratch the belt to avoid early damage to the belt.
*Try to avoid long-term contact with oil and water, and avoid contact with chemicals.
*When replacing the timing belt, the tension of the belt must be reduced to a minimum before taking it out. It is strictly forbidden to use non-professional tools to pry down the timing belt when there is high tension.
Specifications:
*Material: Tooth: Neoprene Belt back: Neoprene Tensile layer: Glass fiber Covering layer: High elastic nylon canvas
*Performance: Tensile strength≥80N/mm Reference force 60N/mm (elongation ≤4% ) Hardness: 75±5
*Width: 8/10/12/15/18/20mm
*Quantity: 2
Package list:
2*belt
Tips:Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Abrasion resistance Rubber timing belt High quality Oil resistance Hot sale Best
Feature:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*It has the characteristics of good dynamic bending performance, good crack resistance, excellent ozone performance, aging resistance, heat resistance, oil resistance, abrasion resistance, etc.
*When purchasing, pay attention to the clean surface of the product, the belt is not twisted, and the teeth are full.
*It is strictly forbidden to bend and damage the frame material and affect the strength of the belt.
*It is strictly forbidden to scratch the belt to avoid early damage to the belt.
*Try to avoid long-term contact with oil and water, and avoid contact with chemicals.
*When replacing the timing belt, the tension of the belt must be reduced to a minimum before taking it out. It is strictly forbidden to use non-professional tools to pry down the timing belt when there is high tension.
Specifications:
*Material: Tooth: Neoprene Belt back: Neoprene Tensile layer: Glass fiber Covering layer: High elastic nylon canvas
*Performance: Tensile strength≥80N/mm Reference force 60N/mm (elongation ≤4% ) Hardness: 75±5
*Width: 8/10/12/15/18/20mm
*Quantity: 2
Package list:
2*belt
Tips:Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Abrasion resistance Rubber timing belt High quality Oil resistance Hot sale Best
Feature:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*It has the characteristics of good dynamic bending performance, good crack resistance, excellent ozone performance, aging resistance, heat resistance, oil resistance, abrasion resistance, etc.
*When purchasing, pay attention to the clean surface of the product, the belt is not twisted, and the teeth are full.
*It is strictly forbidden to bend and damage the frame material and affect the strength of the belt.
*It is strictly forbidden to scratch the belt to avoid early damage to the belt.
*Try to avoid long-term contact with oil and water, and avoid contact with chemicals.
*When replacing the timing belt, the tension of the belt must be reduced to a minimum before taking it out. It is strictly forbidden to use non-professional tools to pry down the timing belt when there is high tension.
Specifications:
*Material: Tooth: Neoprene Belt back: Neoprene Tensile layer: Glass fiber Covering layer: High elastic nylon canvas
*Performance: Tensile strength≥80N/mm Reference force 60N/mm (elongation ≤4% ) Hardness: 75±5
*Width: 8/10/12/15/18/20mm
*Quantity: 2
Package list:
2*belt
Tips:Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Abrasion resistance Rubber timing belt High quality Oil resistance Hot sale Best
Feature:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*It has the characteristics of good dynamic bending performance, good crack resistance, excellent ozone performance, aging resistance, heat resistance, oil resistance, abrasion resistance, etc.
*When purchasing, pay attention to the clean surface of the product, the belt is not twisted, and the teeth are full.
*It is strictly forbidden to bend and damage the frame material and affect the strength of the belt.
*It is strictly forbidden to scratch the belt to avoid early damage to the belt.
*Try to avoid long-term contact with oil and water, and avoid contact with chemicals.
*When replacing the timing belt, the tension of the belt must be reduced to a minimum before taking it out. It is strictly forbidden to use non-professional tools to pry down the timing belt when there is high tension.
Specifications:
*Material: Tooth: Neoprene Belt back: Neoprene Tensile layer: Glass fiber Covering layer: High elastic nylon canvas
*Performance: Tensile strength≥80N/mm Reference force 60N/mm (elongation ≤4% ) Hardness: 75±5
*Width: 8/10/12/15/18/20mm
*Quantity: 2
Package list:
2*belt
Tips:Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

2x Rubber Timing Belt 120XL /60 Teeth Timing Belt Trapezoidal Tooth Drive Belt
Feature:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*It has the characteristics of good dynamic bending performance, good crack resistance, excellent ozone performance, aging resistance, heat resistance, oil resistance, abrasion resistance, etc.
*When purchasing, pay attention to the clean surface of the product, the belt is not twisted, and the teeth are full.
*It is strictly forbidden to bend and damage the frame material and affect the strength of the belt.
*It is strictly forbidden to scratch the belt to avoid early damage to the belt.
*Try to avoid long-term contact with oil and water, and avoid contact with chemicals.
*When replacing the timing belt, the tension of the belt must be reduced to a minimum before taking it out. It is strictly forbidden to use non-professional tools to pry down the timing belt when there is high tension.
Specifications:
*Material: Tooth: Neoprene Belt back: Neoprene Tensile layer: Glass fiber Covering layer: High elastic nylon canvas
*Performance: Tensile strength≥80N/mm Reference force 60N/mm (elongation ≤4% ) Hardness: 75±5
*Width: 8/10/12/15/18/20mm
*Quantity: 2
Package list:
2*belt
Tips:Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

2x Rubber Timing Belt 120XL /60 Teeth Timing Belt Trapezoidal Tooth Drive Belt
Feature:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*It has the characteristics of good dynamic bending performance, good crack resistance, excellent ozone performance, aging resistance, heat resistance, oil resistance, abrasion resistance, etc.
*When purchasing, pay attention to the clean surface of the product, the belt is not twisted, and the teeth are full.
*It is strictly forbidden to bend and damage the frame material and affect the strength of the belt.
*It is strictly forbidden to scratch the belt to avoid early damage to the belt.
*Try to avoid long-term contact with oil and water, and avoid contact with chemicals.
*When replacing the timing belt, the tension of the belt must be reduced to a minimum before taking it out. It is strictly forbidden to use non-professional tools to pry down the timing belt when there is high tension.
Specifications:
*Material: Tooth: Neoprene Belt back: Neoprene Tensile layer: Glass fiber Covering layer: High elastic nylon canvas
*Performance: Tensile strength≥80N/mm Reference force 60N/mm (elongation ≤4% ) Hardness: 75±5
*Width: 8/10/12/15/18/20mm
*Quantity: 2
Package list:
2*belt
Tips:Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

2x Rubber Timing Belt 120XL /60 Teeth Timing Belt Trapezoidal Tooth Drive Belt
Feature:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*It has the characteristics of good dynamic bending performance, good crack resistance, excellent ozone performance, aging resistance, heat resistance, oil resistance, abrasion resistance, etc.
*When purchasing, pay attention to the clean surface of the product, the belt is not twisted, and the teeth are full.
*It is strictly forbidden to bend and damage the frame material and affect the strength of the belt.
*It is strictly forbidden to scratch the belt to avoid early damage to the belt.
*Try to avoid long-term contact with oil and water, and avoid contact with chemicals.
*When replacing the timing belt, the tension of the belt must be reduced to a minimum before taking it out. It is strictly forbidden to use non-professional tools to pry down the timing belt when there is high tension.
Specifications:
*Material: Tooth: Neoprene Belt back: Neoprene Tensile layer: Glass fiber Covering layer: High elastic nylon canvas
*Performance: Tensile strength≥80N/mm Reference force 60N/mm (elongation ≤4% ) Hardness: 75±5
*Width: 8/10/12/15/18/20mm
*Quantity: 2
Package list:
2*belt
Tips:Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

2x Rubber Timing Belt 120XL /60 Teeth Timing Belt Trapezoidal Tooth Drive Belt
Feature:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*It has the characteristics of good dynamic bending performance, good crack resistance, excellent ozone performance, aging resistance, heat resistance, oil resistance, abrasion resistance, etc.
*When purchasing, pay attention to the clean surface of the product, the belt is not twisted, and the teeth are full.
*It is strictly forbidden to bend and damage the frame material and affect the strength of the belt.
*It is strictly forbidden to scratch the belt to avoid early damage to the belt.
*Try to avoid long-term contact with oil and water, and avoid contact with chemicals.
*When replacing the timing belt, the tension of the belt must be reduced to a minimum before taking it out. It is strictly forbidden to use non-professional tools to pry down the timing belt when there is high tension.
Specifications:
*Material: Tooth: Neoprene Belt back: Neoprene Tensile layer: Glass fiber Covering layer: High elastic nylon canvas
*Performance: Tensile strength≥80N/mm Reference force 60N/mm (elongation ≤4% ) Hardness: 75±5
*Width: 8/10/12/15/18/20mm
*Quantity: 2
Package list:
2*belt
Tips:Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

2x Rubber Timing Belt 120XL /60 Teeth Timing Belt Trapezoidal Tooth Drive Belt
Feature:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*It has the characteristics of good dynamic bending performance, good crack resistance, excellent ozone performance, aging resistance, heat resistance, oil resistance, abrasion resistance, etc.
*When purchasing, pay attention to the clean surface of the product, the belt is not twisted, and the teeth are full.
*It is strictly forbidden to bend and damage the frame material and affect the strength of the belt.
*It is strictly forbidden to scratch the belt to avoid early damage to the belt.
*Try to avoid long-term contact with oil and water, and avoid contact with chemicals.
*When replacing the timing belt, the tension of the belt must be reduced to a minimum before taking it out. It is strictly forbidden to use non-professional tools to pry down the timing belt when there is high tension.
Specifications:
*Material: Tooth: Neoprene Belt back: Neoprene Tensile layer: Glass fiber Covering layer: High elastic nylon canvas
*Performance: Tensile strength≥80N/mm Reference force 60N/mm (elongation ≤4% ) Hardness: 75±5
*Width: 8/10/12/15/18/20mm
*Quantity: 2
Package list:
2*belt
Tips:Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

2x Rubber Timing Belt 120XL /60 Teeth Timing Belt Trapezoidal Tooth Drive Belt
Feature:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*It has the characteristics of good dynamic bending performance, good crack resistance, excellent ozone performance, aging resistance, heat resistance, oil resistance, abrasion resistance, etc.
*When purchasing, pay attention to the clean surface of the product, the belt is not twisted, and the teeth are full.
*It is strictly forbidden to bend and damage the frame material and affect the strength of the belt.
*It is strictly forbidden to scratch the belt to avoid early damage to the belt.
*Try to avoid long-term contact with oil and water, and avoid contact with chemicals.
*When replacing the timing belt, the tension of the belt must be reduced to a minimum before taking it out. It is strictly forbidden to use non-professional tools to pry down the timing belt when there is high tension.
Specifications:
*Material: Tooth: Neoprene Belt back: Neoprene Tensile layer: Glass fiber Covering layer: High elastic nylon canvas
*Performance: Tensile strength≥80N/mm Reference force 60N/mm (elongation ≤4% ) Hardness: 75±5
*Width: 8/10/12/15/18/20mm
*Quantity: 2
Package list:
2*belt
Tips:Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Descriptions:
*L298N DC stepper motor driver module dual H bridge control board for Arduino.
*Using large capacity filter capacitor, this module can follow current to protect diodes and improve the reliability.
*With high quality and durable performance.
*100% brand new and in good condition.
*Color: As pictures show
*Main chip: L298N
*Logical voltage: 5V
*Drive voltage 5V-35V
*Logical current: 0mA-36mA
*Drive current: 2A
*Max power: 25W
*Storage temperature: -20℃ to 135℃
*Dimension: about 43 * 43 * 27mm
Package including:
1 * Double H Bridge Drive Module
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Motor Speed Controller AC Voltage Regulator 48*60*28mm1.6mm 2000W Universal
Item Details:
*High Quality 2000W AC Motor Speed Controller Adjustable 50-220V Voltage Regulator
*Specially improved circuit design for motor speed adjustment
*With peak voltage absorption circuit effectively protects the high-power silicon controlled and ensures longer life and better durability
*Can adjust the lowest output voltage through the precise multiturn potentiometer
*Durable and practical
*100% brand new and high quality
*Working voltage: AC 220V
*Max. power: 2000W
*Voltage regulation: AC 50-220V
*Silicon controlled can be resistant to voltage 1200 V / current 25A
*Epoxy copper clad plate thickeness: 1.6mm
*High temperature resistant FR-4 circuit board dimension: 36*48mm (Approx.)
*External dimension: 48*60*28mm (Approx.)
Package Contents:
1*Motor Speed Controller
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Motor Speed Controller 2000W 50-220V Regulator Adjustable Durable Sale
Item Details:
*High Quality 2000W AC Motor Speed Controller Adjustable 50-220V Voltage Regulator
*Specially improved circuit design for motor speed adjustment
*With peak voltage absorption circuit effectively protects the high-power silicon controlled and ensures longer life and better durability
*Can adjust the lowest output voltage through the precise multiturn potentiometer
*Durable and practical
*100% brand new and high quality
*Working voltage: AC 220V
*Max. power: 2000W
*Voltage regulation: AC 50-220V
*Silicon controlled can be resistant to voltage 1200 V / current 25A
*Epoxy copper clad plate thickeness: 1.6mm
*High temperature resistant FR-4 circuit board dimension: 36*48mm (Approx.)
*External dimension: 48*60*28mm (Approx.)
Package Contents:
1*Motor Speed Controller
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Active Voltage Transformer Module Phase 49.5*19.4mm Voltage Sensor Fine
Details:
*Active Single Phase Voltage Transformer Module AC Output Voltage Sensor
*Equipped with ZMPT101B series of high-precision voltage transformer and high-precision op amp current, easy to 250V within the AC power signal acquisition
*Voltage Transformer: On-board Precision Micro Voltage Transformer
*Operational amplifier circuit: high-precision on-board amplifier circuit, the signal to do the exact sampling and appropriate compensation and other functions
*Mode voltage output: the module can measure AC voltage within 250V, the corresponding output mode can be adjusted
*Output signal: the output signal for the sine wave, the waveform of the median (DC component)
*Supply Voltage: 5-30V
*Size: 49.5*19.4mm(Approx.)
Package Contents:
1*Voltage Transformer Module
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

6-28V DC 3A 80W PWM Speed DC Motor Controller Regulator W/ Potentiometer Knob
Product description:
The DC motor PWM speed controller/regulator uses a pulse width modulation (PWM) DC voltage from 6V to 28V to control the duty cycle, and uses the on-board potentiometer to fully adjust the duty cycle in the range of 5% -100% . It can provide up to 3A continuous current for your DC motor or other DC load.
Instructions:1. Rotate the potentiometer counterclockwise until it clicks to close the module.
2. Connect the DC motor (or DC load) to the motor terminals according to the label on the back of the circuit board.
3. Connect the voltage of 6V-28V DC to the circuit board and ensure the correct connection polarity. The voltage applied to the motor will be the power supply voltage applied to the circuit board. We recommend connecting a fuse of appropriate rating in series with the positive power supply to prevent short circuits. Note: The ground connection of the power supply and the motor must be separated. Do not connect the "power-" and "motor-" connections together, otherwise the controller will not work.
4. Turn on the device with the potentiometer. Now you can control the speed of the motor by rotating the potentiometer.
Product parameters:
Input power supply voltage: 6-28 VDC
Maximum output power: 80W
Maximum continuous output current: 3A
Adjustable duty cycle: 5% -100%
Built-in On/Off switch in the potentiometer (completely counterclockwise click to turn off)
After the module is powered on, the car power LED lights up
Dimensions: 50mm x 32mm x 15mm (2in x 1.26in x 0.6in) (LxWxH) (not including potentiometer shaft)
Note: The color or style of the knob may be different from the color or style shown in the product image
Package includes:
1 6V-28V PWM DC motor controller module
1 potentiometer knob
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Carbon Brush Accessories Parts High quality Durable Generic Electric Motor Nice
Description:
This set includes 2 CB203 Carbon Brushes with wire leads and brush springs attached.
The set contains Replacement brushes to fit MKT parts,
This Carbon brush set will fit Many Models Of MKT tools
Worn brushes frequently are the cause behind a motor running poorly.
Replacing brushes can fix a motor that's operating intermittently.
New brushes can restore a motor's electric braking.
MKT Carbon brushes are one of the most commonly replaced power tool parts.
This is because carbon brushes are wear items,
Meaning that through friction and use they will gradually wear away until they need replacing.
Worn brushes are a common causes of intermittent motor function,
Reduced electric braking and reduced motor power.
Specifications:
*Material:Carbon & Metal
*Colour:Black & Gold Tone
*Quantity: 1Pair / 2pcs
Package Included:
1 - Pair Motor Carbon Brush
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Motor Speed Controller AC Voltage 48*60*28mm1.6mm Accessories Universal
Item Details:
*High Quality 2000W AC Motor Speed Controller Adjustable 50-220V Voltage Regulator
*Specially improved circuit design for motor speed adjustment
*With peak voltage absorption circuit effectively protects the high-power silicon controlled and ensures longer life and better durability
*Can adjust the lowest output voltage through the precise multiturn potentiometer
*Durable and practical
*100% brand new and high quality
*Working voltage: AC 220V
*Max. power: 2000W
*Voltage regulation: AC 50-220V
*Silicon controlled can be resistant to voltage 1200 V / current 25A
*Epoxy copper clad plate thickeness: 1.6mm
*High temperature resistant FR-4 circuit board dimension: 36*48mm (Approx.)
*External dimension: 48*60*28mm (Approx.)
Package Contents:
1*Motor Speed Controller
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Motor Speed Controller 50-220V Regulator 48*60*28mm1.6mm Assembly Portable
Item Details:
*High Quality 2000W AC Motor Speed Controller Adjustable 50-220V Voltage Regulator
*Specially improved circuit design for motor speed adjustment
*With peak voltage absorption circuit effectively protects the high-power silicon controlled and ensures longer life and better durability
*Can adjust the lowest output voltage through the precise multiturn potentiometer
*Durable and practical
*100% brand new and high quality
*Working voltage: AC 220V
*Max. power: 2000W
*Voltage regulation: AC 50-220V
*Silicon controlled can be resistant to voltage 1200 V / current 25A
*Epoxy copper clad plate thickeness: 1.6mm
*High temperature resistant FR-4 circuit board dimension: 36*48mm (Approx.)
*External dimension: 48*60*28mm (Approx.)
Package Contents:
1*Motor Speed Controller
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Item Details:
*High Quality 2000W AC Motor Speed Controller Adjustable 50-220V Voltage Regulator
*Specially improved circuit design for motor speed adjustment
*With peak voltage absorption circuit effectively protects the high-power silicon controlled and ensures longer life and better durability
*Can adjust the lowest output voltage through the precise multiturn potentiometer
*Durable and practical
*100% brand new and high quality
*Working voltage: AC 220V
*Max. power: 2000W
*Voltage regulation: AC 50-220V
*Silicon controlled can be resistant to voltage 1200 V / current 25A
*Epoxy copper clad plate thickeness: 1.6mm
*High temperature resistant FR-4 circuit board dimension: 36*48mm (Approx.)
*External dimension: 48*60*28mm (Approx.)
Package Contents:
1*Motor Speed Controller
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Black Timing Belt Pulley Bore Aluminum Alloy GT2 20T For 3D Printer Tool Kit Set
Details:
* 20T 5mm/ 8mm bore GT2 timing belt pulley
* Made of aluminum alloy with excellent processing
* Durable and long lasting, perfect choice for 3D printer
* Great replacement parts for 3D printer to replace your broken one.
* Teeth Number: 20T
* Material: Aluminum Alloy
* Bore Diameter: 5mm, 8mm (Optional)
* Height: 16mm(approx)
* Color: Black(as pictures show)
* Quantity: 5pcs
Package contents:
5* Timing Belt Pulley
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Black Timing Belt Pulley Bore Aluminum Alloy GT2 20T For 3D Printer Tool Kit Set
Details:
* 20T 5mm/ 8mm bore GT2 timing belt pulley
* Made of aluminum alloy with excellent processing
* Durable and long lasting, perfect choice for 3D printer
* Great replacement parts for 3D printer to replace your broken one.
* Teeth Number: 20T
* Material: Aluminum Alloy
* Bore Diameter: 5mm, 8mm (Optional)
* Height: 16mm(approx)
* Color: Black(as pictures show)
* Quantity: 5pcs
Package contents:
5* Timing Belt Pulley
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

1 Pair Carbon Brush For GWS 7-115 Replacement Spare Parts Power Tools Practical
product detail:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*Buy once, use for a long time.
*Fine workmanship and long service life.
* Stable characteristics and high reliability.
*Carbon fiber brushes are one of the most important components in power tools (such as electric drills).
*Brush wear is usually the cause of poor motor operation.
*Replacement of brushes can repair intermittent motors.
*The new brush can restore the electric brake of the motor.
*Note: Do not polish or modify the product.
Specifications:
*Main color: as shown
*Quantity: 2*Carbon brush
*Material: carbon, metal
Package list:
2*Carbon brush
Tips:
Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Active Voltage Transformer Module 49.5*19.4mm Board Voltage Sensor Fine
Details:
*Active Single Phase Voltage Transformer Module AC Output Voltage Sensor
*Equipped with ZMPT101B series of high-precision voltage transformer and high-precision op amp current, easy to 250V within the AC power signal acquisition
*Voltage Transformer: On-board Precision Micro Voltage Transformer
*Operational amplifier circuit: high-precision on-board amplifier circuit, the signal to do the exact sampling and appropriate compensation and other functions
*Mode voltage output: the module can measure AC voltage within 250V, the corresponding output mode can be adjusted
*Output signal: the output signal for the sine wave, the waveform of the median (DC component)
*Supply Voltage: 5-30V
*Size: 49.5*19.4mm(Approx.)
Package Contents:
1*Voltage Transformer Module
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

AC Voltage Sensor Module ZMPT101B 240V Voltage Transformer Module Fitting
Details:
*Active Single Phase Voltage Transformer Module AC Output Voltage Sensor
*Equipped with ZMPT101B series of high-precision voltage transformer and high-precision op amp current, easy to 250V within the AC power signal acquisition
*Voltage Transformer: On-board Precision Micro Voltage Transformer
*Operational amplifier circuit: high-precision on-board amplifier circuit, the signal to do the exact sampling and appropriate compensation and other functions
*Mode voltage output: the module can measure AC voltage within 250V, the corresponding output mode can be adjusted
*Output signal: the output signal for the sine wave, the waveform of the median (DC component)
*Supply Voltage: 5-30V
*Size: 49.5*19.4mm(Approx.)
Package Contents:
1*Voltage Transformer Module
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Rubber timing belt Timing belt 8/10/12/15/18/20mm Hot sale Brand new Best
Feature:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*It has the characteristics of good dynamic bending performance, good crack resistance, excellent ozone performance, aging resistance, heat resistance, oil resistance, abrasion resistance, etc.
*When purchasing, pay attention to the clean surface of the product, the belt is not twisted, and the teeth are full.
*It is strictly forbidden to bend and damage the frame material and affect the strength of the belt.
*It is strictly forbidden to scratch the belt to avoid early damage to the belt.
*Try to avoid long-term contact with oil and water, and avoid contact with chemicals.
*When replacing the timing belt, the tension of the belt must be reduced to a minimum before taking it out. It is strictly forbidden to use non-professional tools to pry down the timing belt when there is high tension.
Specifications:
*Material: Tooth: Neoprene Belt back: Neoprene Tensile layer: Glass fiber Covering layer: High elastic nylon canvas
*Performance: Tensile strength≥80N/mm Reference force 60N/mm (elongation ≤4% ) Hardness: 75±5
*Width: 8/10/12/15/18/20mm
*Quantity: 2
Package list:
2*belt
Tips:Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Rubber timing belt Timing belt 8/10/12/15/18/20mm Hot sale Brand new Best
Feature:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*It has the characteristics of good dynamic bending performance, good crack resistance, excellent ozone performance, aging resistance, heat resistance, oil resistance, abrasion resistance, etc.
*When purchasing, pay attention to the clean surface of the product, the belt is not twisted, and the teeth are full.
*It is strictly forbidden to bend and damage the frame material and affect the strength of the belt.
*It is strictly forbidden to scratch the belt to avoid early damage to the belt.
*Try to avoid long-term contact with oil and water, and avoid contact with chemicals.
*When replacing the timing belt, the tension of the belt must be reduced to a minimum before taking it out. It is strictly forbidden to use non-professional tools to pry down the timing belt when there is high tension.
Specifications:
*Material: Tooth: Neoprene Belt back: Neoprene Tensile layer: Glass fiber Covering layer: High elastic nylon canvas
*Performance: Tensile strength≥80N/mm Reference force 60N/mm (elongation ≤4% ) Hardness: 75±5
*Width: 8/10/12/15/18/20mm
*Quantity: 2
Package list:
2*belt
Tips:Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Rubber timing belt Timing belt 8/10/12/15/18/20mm Hot sale Brand new Best
Feature:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*It has the characteristics of good dynamic bending performance, good crack resistance, excellent ozone performance, aging resistance, heat resistance, oil resistance, abrasion resistance, etc.
*When purchasing, pay attention to the clean surface of the product, the belt is not twisted, and the teeth are full.
*It is strictly forbidden to bend and damage the frame material and affect the strength of the belt.
*It is strictly forbidden to scratch the belt to avoid early damage to the belt.
*Try to avoid long-term contact with oil and water, and avoid contact with chemicals.
*When replacing the timing belt, the tension of the belt must be reduced to a minimum before taking it out. It is strictly forbidden to use non-professional tools to pry down the timing belt when there is high tension.
Specifications:
*Material: Tooth: Neoprene Belt back: Neoprene Tensile layer: Glass fiber Covering layer: High elastic nylon canvas
*Performance: Tensile strength≥80N/mm Reference force 60N/mm (elongation ≤4% ) Hardness: 75±5
*Width: 8/10/12/15/18/20mm
*Quantity: 2
Package list:
2*belt
Tips:Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Rubber timing belt Timing belt 8/10/12/15/18/20mm Hot sale Brand new Best
Feature:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*It has the characteristics of good dynamic bending performance, good crack resistance, excellent ozone performance, aging resistance, heat resistance, oil resistance, abrasion resistance, etc.
*When purchasing, pay attention to the clean surface of the product, the belt is not twisted, and the teeth are full.
*It is strictly forbidden to bend and damage the frame material and affect the strength of the belt.
*It is strictly forbidden to scratch the belt to avoid early damage to the belt.
*Try to avoid long-term contact with oil and water, and avoid contact with chemicals.
*When replacing the timing belt, the tension of the belt must be reduced to a minimum before taking it out. It is strictly forbidden to use non-professional tools to pry down the timing belt when there is high tension.
Specifications:
*Material: Tooth: Neoprene Belt back: Neoprene Tensile layer: Glass fiber Covering layer: High elastic nylon canvas
*Performance: Tensile strength≥80N/mm Reference force 60N/mm (elongation ≤4% ) Hardness: 75±5
*Width: 8/10/12/15/18/20mm
*Quantity: 2
Package list:
2*belt
Tips:Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.