Kategóriák

Accessories Motorcycle Voltmeter Measurement Digital 6V-30V Acrylic Dustproof
Item Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Voltmeter electronic clock, low voltage, high voltage warning function
* Safe, waterproof, multi-function combination of low voltage (12V) and high voltage (16V or more) flashing warning function.
* Wiring method: the red wire is connected to the battery positive pole, the black wire is connected to the battery negative pole, and the blue wire is connected to the main power switch.
* Material: Acrylic
* Light color: Red (As pictures show)
* Waterproof and dustproof: IP67
* Voltage range: 6V-30V
Time setting description:
1. In the power supply state, press and hold the button for 2 seconds and the hour segment flashes, indicating that the hour setting is entered. At this time, press the button once for 1 hour (24-hour system).
2. After the time value is set, press and hold the button for 2 seconds to flash the minute, indicating that the minute setting is entered. At this time, press the button once for 1 minute.
3. After setting the minutes, press and hold the button again for 2 seconds to exit the time setting.
Package Contents:
1* Electronic Voltmeter
1* Electronic Voltmeter Fixed Base
2* Cable Tie
2* Screw
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Waterproof Motorcycle Voltmeter Two-In-One Multi-Function Digital Display 6V-30V
Item Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Voltmeter electronic clock, low voltage, high voltage warning function
* Safe, waterproof, multi-function combination of low voltage (12V) and high voltage (16V or more) flashing warning function.
* Wiring method: the red wire is connected to the battery positive pole, the black wire is connected to the battery negative pole, and the blue wire is connected to the main power switch.
* Material: Acrylic
* Light color: Red (As pictures show)
* Waterproof and dustproof: IP67
* Voltage range: 6V-30V
Time setting description:
1. In the power supply state, press and hold the button for 2 seconds and the hour segment flashes, indicating that the hour setting is entered. At this time, press the button once for 1 hour (24-hour system).
2. After the time value is set, press and hold the button for 2 seconds to flash the minute, indicating that the minute setting is entered. At this time, press the button once for 1 minute.
3. After setting the minutes, press and hold the button again for 2 seconds to exit the time setting.
Package Contents:
1* Electronic Voltmeter
1* Electronic Voltmeter Fixed Base
2* Cable Tie
2* Screw
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Signal Generator Adjustable Square wave Digital 1Hz-150KHz Useful Durable
Item Details:
*100% Brand new and high quality
*With LCD LCD display frequency and duty cycle, very clear, PWM output, can set frequency and duty cycle separately
*Wide frequency range and high precision;
*Serial communication
*PWM output, can set the frequency and duty cycle separately
*The frequency is divided into four ranges and automatically switched:1.XXX (no decimal point): The minimum unit is 1 Hz, and the value ranges from 1 Hz to 999 Hz.
2.X.XX (the decimal point is in the hundredth place) The minimum unit is 0.01Khz, and the value range is 1.00Khz~9.99Khz;
3.XX.X (decimal point is ten): the minimum unit is 0.1Khz; the value range is 10.0KHz~99.9KHz
4.X.X.X (decimal point in ten and hundred): the minimum unit is 1Khz; the value range is 1KHz~150KHz
E.g. Frequency display: 100 means PWM output 100Hz pulse;
1.01 indicates that the PWM outputs a pulse of 1.01K;
54.1 indicates that the PWM outputs a pulse of 54.1 kHz;
1.2.4 indicates that the PWM output is a pulse of 124KHz;
*The duty ratio ranges from 0 to 100% ;
*All setting parameters, save power
*The module has 4 separated buttons, which are used to set the frequency and duty ratio. It supports short press (increase or decrease one unit) and long press (fast increase or decrease). It is very simple, and the parameters are automatically saved after setting. Not lose if power off
Specification:
*Voltage: 3.3~30V;
*Frequency range: 1Hz~150KHz
*Frequency accuracy: the accuracy in each range is about 2%
*Signal load capacity: The output current can be around 5~30ma
*Output amplitude: The PWM amplitude is equal to the power supply voltage
*Ambient temperature: -20~ 70degree Celsius
*Scope of application:1. Used as a square wave signal generator, generate a square wave signal for experimental development
2. Used to generate a square wave signal that controls the motor driver
3. Generate adjustable pulses for MCU
4. Generate adjustable pulses, control related circuits (PWM dimming, speed control and other applications)
Package Contents:
1*Signal Generator
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Needle Back Test Probes 5Pcs Electrical Measure Tool With 20pcs Replace Tip Set
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
*This acupuncture probe is a back-fixed, pierced and repairable probe.
*The kit includes 5 complete acupuncture probes, 2 screws and 20 replacement needles.
*The small tip can slide over the weatherproof seal to reach the probe connector.
*As acupuncture probes, they are used to pierce the insulation of wires to make automotive electrical measurements without damaging the wires.
*They can be used as tip probes when dealing with small circuit boards.
*This set of 5 probes also comes with 20 replacement pins, eliminating the need to replace the entire probe.
*The small diameter and super sharp pins make it ideal for piercing the insulation on small gauge wires.
Specifications:
*Probe color: black/blue/yellow/red/Greem
*Acupuncture probes: 5
*Replacement needles: 20
*Full probe length (1 piece): 65mm / 2.56in
*Pin length: 37mm / 1.45in
*Packing size: 12 * 7.5cm / 4.72 * 2.95in (L * W)
*Package weight: 23g / 0.81oz
Package Contents:
5 *Complete test probe
20 *Replace needle
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Diagnostic Test Probes 65mm 2.56inch Needle Back 5Pcs Acupuncture Pins
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
*This acupuncture probe is a back-fixed, pierced and repairable probe.
*The kit includes 5 complete acupuncture probes, 2 screws and 20 replacement needles.
*The small tip can slide over the weatherproof seal to reach the probe connector.
*As acupuncture probes, they are used to pierce the insulation of wires to make automotive electrical measurements without damaging the wires.
*They can be used as tip probes when dealing with small circuit boards.
*This set of 5 probes also comes with 20 replacement pins, eliminating the need to replace the entire probe.
*The small diameter and super sharp pins make it ideal for piercing the insulation on small gauge wires.
Specifications:
*Probe color: black/blue/yellow/red/Greem
*Acupuncture probes: 5
*Replacement needles: 20
*Full probe length (1 piece): 65mm / 2.56in
*Pin length: 37mm / 1.45in
*Packing size: 12 * 7.5cm / 4.72 * 2.95in (L * W)
*Package weight: 23g / 0.81oz
Package Contents:
5 *Complete test probe
20 *Replace needle
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

1pc Big Screen Large Screen Digital Ohmmeter Multimeter Volts AC DC Ohm Tester
Item Details:
*100% Brand new and high quality
*Made of high quality materials, durable and practical
*Big screen multimeter
*Large screen, easy to read
*Convenient and practical, suitable for beginners
*50Hz square wave output as a signal source
Specification:
*DCV: 200m-2000m-20-200-1000V±0.5%
*AC voltage: 200-750V±1.0%
*DCA: 2000u-20m-200m-10A±1.8%
*Resistance: 200-2000-20K-200K-2000KΩ±1.0%
*LCD size: 62 x 34mm
*Maximum display: 1999
*Battery low indication: yes
*Diode test: yes
*Transistor test: yes
*Continuous buzzer test: yes
*Square wave output: yes
*Security guarantee: overload protection
*Power: One 9V 6F22 battery (excluding battery)
*Color: Black(As Pictures Show)
*Size: 128mm x 70mm x 25mm
Package Contents:
1*Digital Multimeter (no battery)
2*Test Line
1*Manual
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

1x Adjustable Step Up Boost Converter Power Module 10-32V To 12-35V 10A Replace
Product description:
Module attribute: non-isolated boost module
Application range:1. DIY an output adjustable car power supply, connect 12V input, the output can be 14-35V (freely adjustable), but the output voltage cannot be less than the input voltage.
2. Car laptop power supply: Connect to a 12V power supply, and adjust the output voltage according to the needs of the laptop.
Product parameters:
Product size: 65 * 56.5 * 23MM
Input voltage: 10-32V
Output voltage: 12-35V (adjustable)
Output current: 6A (maximum)
Input current: 10A (maximum) (if greater than 10A, please enhance heat dissipation)
Output power: natural cooling 100W (MAX), enhanced heat dissipation 150W (MAX)
Easy-to-drive 65W 90W dual-core laptop.
Use 12V battery to drive 19V 3.42A laptop, the module temperature is about 45°c
Conversion efficiency: 94% (measured at input 16V, output 19V 2.5A)
Output ripple: 2% (maximum) 20M bandwidth
Working temperature: industrial temperature (-40°C to 85°C) (the ambient temperature exceeds 40°C, reduce power consumption or enhance heat dissipation)
Full load temperature rise: 45°c
No-load current: 25mA typical
Voltage adjustment rate: ±0.5%
Dynamic response speed: 5% 200uS
Short circuit protection: None (please install a fuse and a protection circuit on the input port.)
Input reverse polarity protection: None (Please connect a diode in series with the input port.)
Includes brass bracket.
Package list:
1 *power module
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Power module Replacement 1pcs DC-DC Adjustable Step Up Boost Converter
Product description:
Module attribute: non-isolated boost module
Application range:1. DIY an output adjustable car power supply, connect 12V input, the output can be 14-35V (freely adjustable), but the output voltage cannot be less than the input voltage.
2. Car laptop power supply: Connect to a 12V power supply, and adjust the output voltage according to the needs of the laptop.
Product parameters:
Product size: 65 * 56.5 * 23MM
Input voltage: 10-32V
Output voltage: 12-35V (adjustable)
Output current: 6A (maximum)
Input current: 10A (maximum) (if greater than 10A, please enhance heat dissipation)
Output power: natural cooling 100W (MAX), enhanced heat dissipation 150W (MAX)
Easy-to-drive 65W 90W dual-core laptop.
Use 12V battery to drive 19V 3.42A laptop, the module temperature is about 45°c
Conversion efficiency: 94% (measured at input 16V, output 19V 2.5A)
Output ripple: 2% (maximum) 20M bandwidth
Working temperature: industrial temperature (-40°C to 85°C) (the ambient temperature exceeds 40°C, reduce power consumption or enhance heat dissipation)
Full load temperature rise: 45°c
No-load current: 25mA typical
Voltage adjustment rate: ±0.5%
Dynamic response speed: 5% 200uS
Short circuit protection: None (please install a fuse and a protection circuit on the input port.)
Input reverse polarity protection: None (Please connect a diode in series with the input port.)
Includes brass bracket.
Package list:
1 *power module
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

5pcs Acupuncture Back Probe Pins Set Automotive Diagnostic Test Needle Tool Set
5pcs Acupuncture Back Probe Pins Set Automotive Diagnostic Test Needle Tool Set
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
*This acupuncture probe is a back-fixed, pierced and repairable probe.
*The kit includes 5 complete acupuncture probes, 2 screws and 20 replacement needles.
*The small tip can slide over the weatherproof seal to reach the probe connector.
*As acupuncture probes, they are used to pierce the insulation of wires to make automotive electrical measurements without damaging the wires.
*They can be used as tip probes when dealing with small circuit boards.
*This set of 5 probes also comes with 20 replacement pins, eliminating the need to replace the entire probe.
*The small diameter and super sharp pins make it ideal for piercing the insulation on small gauge wires.
Specifications:
*Probe color: black/blue/yellow/red/Greem
*Acupuncture probes: 5
*Replacement needles: 20
*Full probe length (1 piece): 65mm / 2.56in
*Pin length: 37mm / 1.45in
*Packing size: 12 * 7.5cm / 4.72 * 2.95in (L * W)
*Package weight: 23g / 0.81oz
Package Contents:
5 *Complete test probe
20 *Replace needle
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Accessory Power module Parts Replacement 1pcs Adjustable Converter New
Product description:
Module attribute: non-isolated boost module
Application range:1. DIY an output adjustable car power supply, connect 12V input, the output can be 14-35V (freely adjustable), but the output voltage cannot be less than the input voltage.
2. Car laptop power supply: Connect to a 12V power supply, and adjust the output voltage according to the needs of the laptop.
Product parameters:
Product size: 65 * 56.5 * 23MM
Input voltage: 10-32V
Output voltage: 12-35V (adjustable)
Output current: 6A (maximum)
Input current: 10A (maximum) (if greater than 10A, please enhance heat dissipation)
Output power: natural cooling 100W (MAX), enhanced heat dissipation 150W (MAX)
Easy-to-drive 65W 90W dual-core laptop.
Use 12V battery to drive 19V 3.42A laptop, the module temperature is about 45°c
Conversion efficiency: 94% (measured at input 16V, output 19V 2.5A)
Output ripple: 2% (maximum) 20M bandwidth
Working temperature: industrial temperature (-40°C to 85°C) (the ambient temperature exceeds 40°C, reduce power consumption or enhance heat dissipation)
Full load temperature rise: 45°c
No-load current: 25mA typical
Voltage adjustment rate: ±0.5%
Dynamic response speed: 5% 200uS
Short circuit protection: None (please install a fuse and a protection circuit on the input port.)
Input reverse polarity protection: None (Please connect a diode in series with the input port.)
Includes brass bracket.
Package list:
1 *power module
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Temperature Meter Temperature Meter Waterproof Dustproof 24V 48V Battery
Item Details:
*100% Brand new and high quality
*The surface is dustproof and waterproof, with full protection of the back cover
*One-piece display port, soft button
*Color LCD material, clear light display, soft night display
*Custom battery type, suitable for lead acid, lithium battery, lifepo4, nickel hydrogen battery
*Display percentage remaining power, voltage, temperature value (degrees Celsius, Fahrenheit can be set)
*10-100V wide voltage input, reverse connection protection
*Custom delay 10-120 seconds sleep
*Shutdown sleep low power consumption
*Simple installation, self-contained buckle free screw
*Low pressure alarm
*Over temperature alarm (shared built-in buzzer optional)
*Battery temperature real-time detection (optional external temperature probe)
*Open programming mode
Specifications:
*Product size 61.5*33.5*13.5 mm (2.42*1.32*0.53in)
*Mounting size 58.5*28.5 mm (2.30*1.12in)
*Display size 33*16.5 mm (1.30*0.65in)
*Operating voltage 10V to 100 V
*Operating power 8/10 mA backlight on
*Delay time adjustable 10~120S (10.20.30.60.120 seconds adjustable)
*Sleep power consumption 15/20 uA 20V
*Voltage accuracy ±0.1 / ±0.5 %
*Temperature accuracy ±0.5 / ±1 °C Built-in standard (external 30CM probe option)
*Temperature range -19 ~ 80 °C Celsius
*Temperature range -2.2~ 179 °F Fahrenheit
*Over temperature alarm adjustable 0 ~ 79 °C (1 second interval after over temperature) buzzer temperature value flashing
Over temperature alarm adjustable 0 ~179 °F (1 second interval after over temperature buzzer) temperature value flashing
*Low-voltage alarm adjustable 10.5~ 60.0 V (1 second interval after low voltage buzzer) voltage value flashing
*Working temperature -10 ~65 °C
Package Contents:
1*Battery Capacity Indicator
1*Cable
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Temperature Meter Temperature Meter Waterproof Dustproof 24V 48V Battery
Item Details:
*100% Brand new and high quality
*The surface is dustproof and waterproof, with full protection of the back cover
*One-piece display port, soft button
*Color LCD material, clear light display, soft night display
*Custom battery type, suitable for lead acid, lithium battery, lifepo4, nickel hydrogen battery
*Display percentage remaining power, voltage, temperature value (degrees Celsius, Fahrenheit can be set)
*10-100V wide voltage input, reverse connection protection
*Custom delay 10-120 seconds sleep
*Shutdown sleep low power consumption
*Simple installation, self-contained buckle free screw
*Low pressure alarm
*Over temperature alarm (shared built-in buzzer optional)
*Battery temperature real-time detection (optional external temperature probe)
*Open programming mode
Specifications:
*Product size 61.5*33.5*13.5 mm (2.42*1.32*0.53in)
*Mounting size 58.5*28.5 mm (2.30*1.12in)
*Display size 33*16.5 mm (1.30*0.65in)
*Operating voltage 10V to 100 V
*Operating power 8/10 mA backlight on
*Delay time adjustable 10~120S (10.20.30.60.120 seconds adjustable)
*Sleep power consumption 15/20 uA 20V
*Voltage accuracy ±0.1 / ±0.5 %
*Temperature accuracy ±0.5 / ±1 °C Built-in standard (external 30CM probe option)
*Temperature range -19 ~ 80 °C Celsius
*Temperature range -2.2~ 179 °F Fahrenheit
*Over temperature alarm adjustable 0 ~ 79 °C (1 second interval after over temperature) buzzer temperature value flashing
Over temperature alarm adjustable 0 ~179 °F (1 second interval after over temperature buzzer) temperature value flashing
*Low-voltage alarm adjustable 10.5~ 60.0 V (1 second interval after low voltage buzzer) voltage value flashing
*Working temperature -10 ~65 °C
Package Contents:
1*Battery Capacity Indicator
1*Cable
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Temperature Meter Temperature Meter Waterproof Dustproof 24V 48V Battery
Item Details:
*100% Brand new and high quality
*The surface is dustproof and waterproof, with full protection of the back cover
*One-piece display port, soft button
*Color LCD material, clear light display, soft night display
*Custom battery type, suitable for lead acid, lithium battery, lifepo4, nickel hydrogen battery
*Display percentage remaining power, voltage, temperature value (degrees Celsius, Fahrenheit can be set)
*10-100V wide voltage input, reverse connection protection
*Custom delay 10-120 seconds sleep
*Shutdown sleep low power consumption
*Simple installation, self-contained buckle free screw
*Low pressure alarm
*Over temperature alarm (shared built-in buzzer optional)
*Battery temperature real-time detection (optional external temperature probe)
*Open programming mode
Specifications:
*Product size 61.5*33.5*13.5 mm (2.42*1.32*0.53in)
*Mounting size 58.5*28.5 mm (2.30*1.12in)
*Display size 33*16.5 mm (1.30*0.65in)
*Operating voltage 10V to 100 V
*Operating power 8/10 mA backlight on
*Delay time adjustable 10~120S (10.20.30.60.120 seconds adjustable)
*Sleep power consumption 15/20 uA 20V
*Voltage accuracy ±0.1 / ±0.5 %
*Temperature accuracy ±0.5 / ±1 °C Built-in standard (external 30CM probe option)
*Temperature range -19 ~ 80 °C Celsius
*Temperature range -2.2~ 179 °F Fahrenheit
*Over temperature alarm adjustable 0 ~ 79 °C (1 second interval after over temperature) buzzer temperature value flashing
Over temperature alarm adjustable 0 ~179 °F (1 second interval after over temperature buzzer) temperature value flashing
*Low-voltage alarm adjustable 10.5~ 60.0 V (1 second interval after low voltage buzzer) voltage value flashing
*Working temperature -10 ~65 °C
Package Contents:
1*Battery Capacity Indicator
1*Cable
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Temperature Meter Temperature Meter Waterproof Dustproof 24V 48V Battery
Item Details:
*100% Brand new and high quality
*The surface is dustproof and waterproof, with full protection of the back cover
*One-piece display port, soft button
*Color LCD material, clear light display, soft night display
*Custom battery type, suitable for lead acid, lithium battery, lifepo4, nickel hydrogen battery
*Display percentage remaining power, voltage, temperature value (degrees Celsius, Fahrenheit can be set)
*10-100V wide voltage input, reverse connection protection
*Custom delay 10-120 seconds sleep
*Shutdown sleep low power consumption
*Simple installation, self-contained buckle free screw
*Low pressure alarm
*Over temperature alarm (shared built-in buzzer optional)
*Battery temperature real-time detection (optional external temperature probe)
*Open programming mode
Specifications:
*Product size 61.5*33.5*13.5 mm (2.42*1.32*0.53in)
*Mounting size 58.5*28.5 mm (2.30*1.12in)
*Display size 33*16.5 mm (1.30*0.65in)
*Operating voltage 10V to 100 V
*Operating power 8/10 mA backlight on
*Delay time adjustable 10~120S (10.20.30.60.120 seconds adjustable)
*Sleep power consumption 15/20 uA 20V
*Voltage accuracy ±0.1 / ±0.5 %
*Temperature accuracy ±0.5 / ±1 °C Built-in standard (external 30CM probe option)
*Temperature range -19 ~ 80 °C Celsius
*Temperature range -2.2~ 179 °F Fahrenheit
*Over temperature alarm adjustable 0 ~ 79 °C (1 second interval after over temperature) buzzer temperature value flashing
Over temperature alarm adjustable 0 ~179 °F (1 second interval after over temperature buzzer) temperature value flashing
*Low-voltage alarm adjustable 10.5~ 60.0 V (1 second interval after low voltage buzzer) voltage value flashing
*Working temperature -10 ~65 °C
Package Contents:
1*Battery Capacity Indicator
1*Cable
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

12/24/36/48V LCD Acid Lead Lithium Battery Capacity Indicator Voltmeter Voltage
Item Details:
*100% Brand new and high quality
*The surface is dustproof and waterproof, with full protection of the back cover
*One-piece display port, soft button
*Color LCD material, clear light display, soft night display
*Custom battery type, suitable for lead acid, lithium battery, lifepo4, nickel hydrogen battery
*Display percentage remaining power, voltage, temperature value (degrees Celsius, Fahrenheit can be set)
*10-100V wide voltage input, reverse connection protection
*Custom delay 10-120 seconds sleep
*Shutdown sleep low power consumption
*Simple installation, self-contained buckle free screw
*Low pressure alarm
*Over temperature alarm (shared built-in buzzer optional)
*Battery temperature real-time detection (optional external temperature probe)
*Open programming mode
Specifications:
*Product size 61.5*33.5*13.5 mm (2.42*1.32*0.53in)
*Mounting size 58.5*28.5 mm (2.30*1.12in)
*Display size 33*16.5 mm (1.30*0.65in)
*Operating voltage 10V to 100 V
*Operating power 8/10 mA backlight on
*Delay time adjustable 10~120S (10.20.30.60.120 seconds adjustable)
*Sleep power consumption 15/20 uA 20V
*Voltage accuracy ±0.1 / ±0.5 %
*Temperature accuracy ±0.5 / ±1 °C Built-in standard (external 30CM probe option)
*Temperature range -19 ~ 80 °C Celsius
*Temperature range -2.2~ 179 °F Fahrenheit
*Over temperature alarm adjustable 0 ~ 79 °C (1 second interval after over temperature) buzzer temperature value flashing
Over temperature alarm adjustable 0 ~179 °F (1 second interval after over temperature buzzer) temperature value flashing
*Low-voltage alarm adjustable 10.5~ 60.0 V (1 second interval after low voltage buzzer) voltage value flashing
*Working temperature -10 ~65 °C
Package Contents:
1*Battery Capacity Indicator
1*Cable
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

12/24/36/48V LCD Acid Lead Lithium Battery Capacity Indicator Voltmeter Voltage
Item Details:
*100% Brand new and high quality
*The surface is dustproof and waterproof, with full protection of the back cover
*One-piece display port, soft button
*Color LCD material, clear light display, soft night display
*Custom battery type, suitable for lead acid, lithium battery, lifepo4, nickel hydrogen battery
*Display percentage remaining power, voltage, temperature value (degrees Celsius, Fahrenheit can be set)
*10-100V wide voltage input, reverse connection protection
*Custom delay 10-120 seconds sleep
*Shutdown sleep low power consumption
*Simple installation, self-contained buckle free screw
*Low pressure alarm
*Over temperature alarm (shared built-in buzzer optional)
*Battery temperature real-time detection (optional external temperature probe)
*Open programming mode
Specifications:
*Product size 61.5*33.5*13.5 mm (2.42*1.32*0.53in)
*Mounting size 58.5*28.5 mm (2.30*1.12in)
*Display size 33*16.5 mm (1.30*0.65in)
*Operating voltage 10V to 100 V
*Operating power 8/10 mA backlight on
*Delay time adjustable 10~120S (10.20.30.60.120 seconds adjustable)
*Sleep power consumption 15/20 uA 20V
*Voltage accuracy ±0.1 / ±0.5 %
*Temperature accuracy ±0.5 / ±1 °C Built-in standard (external 30CM probe option)
*Temperature range -19 ~ 80 °C Celsius
*Temperature range -2.2~ 179 °F Fahrenheit
*Over temperature alarm adjustable 0 ~ 79 °C (1 second interval after over temperature) buzzer temperature value flashing
Over temperature alarm adjustable 0 ~179 °F (1 second interval after over temperature buzzer) temperature value flashing
*Low-voltage alarm adjustable 10.5~ 60.0 V (1 second interval after low voltage buzzer) voltage value flashing
*Working temperature -10 ~65 °C
Package Contents:
1*Battery Capacity Indicator
1*Cable
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

12/24/36/48V LCD Acid Lead Lithium Battery Capacity Indicator Voltmeter Voltage
Item Details:
*100% Brand new and high quality
*The surface is dustproof and waterproof, with full protection of the back cover
*One-piece display port, soft button
*Color LCD material, clear light display, soft night display
*Custom battery type, suitable for lead acid, lithium battery, lifepo4, nickel hydrogen battery
*Display percentage remaining power, voltage, temperature value (degrees Celsius, Fahrenheit can be set)
*10-100V wide voltage input, reverse connection protection
*Custom delay 10-120 seconds sleep
*Shutdown sleep low power consumption
*Simple installation, self-contained buckle free screw
*Low pressure alarm
*Over temperature alarm (shared built-in buzzer optional)
*Battery temperature real-time detection (optional external temperature probe)
*Open programming mode
Specifications:
*Product size 61.5*33.5*13.5 mm (2.42*1.32*0.53in)
*Mounting size 58.5*28.5 mm (2.30*1.12in)
*Display size 33*16.5 mm (1.30*0.65in)
*Operating voltage 10V to 100 V
*Operating power 8/10 mA backlight on
*Delay time adjustable 10~120S (10.20.30.60.120 seconds adjustable)
*Sleep power consumption 15/20 uA 20V
*Voltage accuracy ±0.1 / ±0.5 %
*Temperature accuracy ±0.5 / ±1 °C Built-in standard (external 30CM probe option)
*Temperature range -19 ~ 80 °C Celsius
*Temperature range -2.2~ 179 °F Fahrenheit
*Over temperature alarm adjustable 0 ~ 79 °C (1 second interval after over temperature) buzzer temperature value flashing
Over temperature alarm adjustable 0 ~179 °F (1 second interval after over temperature buzzer) temperature value flashing
*Low-voltage alarm adjustable 10.5~ 60.0 V (1 second interval after low voltage buzzer) voltage value flashing
*Working temperature -10 ~65 °C
Package Contents:
1*Battery Capacity Indicator
1*Cable
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

12/24/36/48V LCD Acid Lead Lithium Battery Capacity Indicator Voltmeter Voltage
Item Details:
*100% Brand new and high quality
*The surface is dustproof and waterproof, with full protection of the back cover
*One-piece display port, soft button
*Color LCD material, clear light display, soft night display
*Custom battery type, suitable for lead acid, lithium battery, lifepo4, nickel hydrogen battery
*Display percentage remaining power, voltage, temperature value (degrees Celsius, Fahrenheit can be set)
*10-100V wide voltage input, reverse connection protection
*Custom delay 10-120 seconds sleep
*Shutdown sleep low power consumption
*Simple installation, self-contained buckle free screw
*Low pressure alarm
*Over temperature alarm (shared built-in buzzer optional)
*Battery temperature real-time detection (optional external temperature probe)
*Open programming mode
Specifications:
*Product size 61.5*33.5*13.5 mm (2.42*1.32*0.53in)
*Mounting size 58.5*28.5 mm (2.30*1.12in)
*Display size 33*16.5 mm (1.30*0.65in)
*Operating voltage 10V to 100 V
*Operating power 8/10 mA backlight on
*Delay time adjustable 10~120S (10.20.30.60.120 seconds adjustable)
*Sleep power consumption 15/20 uA 20V
*Voltage accuracy ±0.1 / ±0.5 %
*Temperature accuracy ±0.5 / ±1 °C Built-in standard (external 30CM probe option)
*Temperature range -19 ~ 80 °C Celsius
*Temperature range -2.2~ 179 °F Fahrenheit
*Over temperature alarm adjustable 0 ~ 79 °C (1 second interval after over temperature) buzzer temperature value flashing
Over temperature alarm adjustable 0 ~179 °F (1 second interval after over temperature buzzer) temperature value flashing
*Low-voltage alarm adjustable 10.5~ 60.0 V (1 second interval after low voltage buzzer) voltage value flashing
*Working temperature -10 ~65 °C
Package Contents:
1*Battery Capacity Indicator
1*Cable
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

3in1 12V Led Car Clock Thermometer Temperature Gauge Voltmeter Voltage Tester
Features:
*Made of high quality material, durable and practical to use
*100% brand new and high quality
*Multifunctional electronic clock module, set time, inside and outside temperature, voltage as one
*Can display a single item, or you can cycle through the items alternately and customize the item to be displayed
*Time chip using Epson's RX8025T chip, this chip is a temperature compensated clock chip, time accurate
*Standard 0.3 m 1.5 m module with two waterproof probes, temperature range -35 ~ 1200C
*With brightness adjustment, 3 brightness adjustable
*And automatic brightness function, can be dark at night, brighten during the day
Specifications:
*Optional Color: Red, Green, Blue(As Pictures Show)
*Working voltage: DC 5.0 ~ 28V
*Voltage display range: 5.0 ~ 28V
*Temperature display range: -35 ~ 120 0C(Two temperature sensors, 0.3 meters 1.5 meters)
*Power lead length: 28cm(Approx.)
*Frame size: 22 * 58 mm(Approx.)
*Installation hole size: 19.5 * 56 mm(Approx.)
Package Contents:
1*Car Clock
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

3in1 12V Led Car Clock Thermometer Temperature Gauge Voltmeter Voltage Tester
Features:
*Made of high quality material, durable and practical to use
*100% brand new and high quality
*Multifunctional electronic clock module, set time, inside and outside temperature, voltage as one
*Can display a single item, or you can cycle through the items alternately and customize the item to be displayed
*Time chip using Epson's RX8025T chip, this chip is a temperature compensated clock chip, time accurate
*Standard 0.3 m 1.5 m module with two waterproof probes, temperature range -35 ~ 1200C
*With brightness adjustment, 3 brightness adjustable
*And automatic brightness function, can be dark at night, brighten during the day
Specifications:
*Optional Color: Red, Green, Blue(As Pictures Show)
*Working voltage: DC 5.0 ~ 28V
*Voltage display range: 5.0 ~ 28V
*Temperature display range: -35 ~ 120 0C(Two temperature sensors, 0.3 meters 1.5 meters)
*Power lead length: 28cm(Approx.)
*Frame size: 22 * 58 mm(Approx.)
*Installation hole size: 19.5 * 56 mm(Approx.)
Package Contents:
1*Car Clock
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

3in1 12V Led Car Clock Thermometer Temperature Gauge Voltmeter Voltage Tester
Features:
*Made of high quality material, durable and practical to use
*100% brand new and high quality
*Multifunctional electronic clock module, set time, inside and outside temperature, voltage as one
*Can display a single item, or you can cycle through the items alternately and customize the item to be displayed
*Time chip using Epson's RX8025T chip, this chip is a temperature compensated clock chip, time accurate
*Standard 0.3 m 1.5 m module with two waterproof probes, temperature range -35 ~ 1200C
*With brightness adjustment, 3 brightness adjustable
*And automatic brightness function, can be dark at night, brighten during the day
Specifications:
*Optional Color: Red, Green, Blue(As Pictures Show)
*Working voltage: DC 5.0 ~ 28V
*Voltage display range: 5.0 ~ 28V
*Temperature display range: -35 ~ 120 0C(Two temperature sensors, 0.3 meters 1.5 meters)
*Power lead length: 28cm(Approx.)
*Frame size: 22 * 58 mm(Approx.)
*Installation hole size: 19.5 * 56 mm(Approx.)
Package Contents:
1*Car Clock
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Pro Digital LED Electronic Clock Time Thermometer Voltmeter For 12V Car Auto
Features:
*Made of high quality material, durable and practical to use
*100% brand new and high quality
*Multifunctional electronic clock module, set time, inside and outside temperature, voltage as one
*Can display a single item, or you can cycle through the items alternately and customize the item to be displayed
*Time chip using Epson's RX8025T chip, this chip is a temperature compensated clock chip, time accurate
*Standard 0.3 m 1.5 m module with two waterproof probes, temperature range -35 ~ 1200C
*With brightness adjustment, 3 brightness adjustable
*And automatic brightness function, can be dark at night, brighten during the day
Specifications:
*Optional Color: Red, Green, Blue(As Pictures Show)
*Working voltage: DC 5.0 ~ 28V
*Voltage display range: 5.0 ~ 28V
*Temperature display range: -35 ~ 120 0C(Two temperature sensors, 0.3 meters 1.5 meters)
*Power lead length: 28cm(Approx.)
*Frame size: 22 * 58 mm(Approx.)
*Installation hole size: 19.5 * 56 mm(Approx.)
Package Contents:
1*Car Clock
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Pro Digital LED Electronic Clock Time Thermometer Voltmeter For 12V Car Auto
Features:
*Made of high quality material, durable and practical to use
*100% brand new and high quality
*Multifunctional electronic clock module, set time, inside and outside temperature, voltage as one
*Can display a single item, or you can cycle through the items alternately and customize the item to be displayed
*Time chip using Epson's RX8025T chip, this chip is a temperature compensated clock chip, time accurate
*Standard 0.3 m 1.5 m module with two waterproof probes, temperature range -35 ~ 1200C
*With brightness adjustment, 3 brightness adjustable
*And automatic brightness function, can be dark at night, brighten during the day
Specifications:
*Optional Color: Red, Green, Blue(As Pictures Show)
*Working voltage: DC 5.0 ~ 28V
*Voltage display range: 5.0 ~ 28V
*Temperature display range: -35 ~ 120 0C(Two temperature sensors, 0.3 meters 1.5 meters)
*Power lead length: 28cm(Approx.)
*Frame size: 22 * 58 mm(Approx.)
*Installation hole size: 19.5 * 56 mm(Approx.)
Package Contents:
1*Car Clock
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Pro Digital LED Electronic Clock Time Thermometer Voltmeter For 12V Car Auto
Features:
*Made of high quality material, durable and practical to use
*100% brand new and high quality
*Multifunctional electronic clock module, set time, inside and outside temperature, voltage as one
*Can display a single item, or you can cycle through the items alternately and customize the item to be displayed
*Time chip using Epson's RX8025T chip, this chip is a temperature compensated clock chip, time accurate
*Standard 0.3 m 1.5 m module with two waterproof probes, temperature range -35 ~ 1200C
*With brightness adjustment, 3 brightness adjustable
*And automatic brightness function, can be dark at night, brighten during the day
Specifications:
*Optional Color: Red, Green, Blue(As Pictures Show)
*Working voltage: DC 5.0 ~ 28V
*Voltage display range: 5.0 ~ 28V
*Temperature display range: -35 ~ 120 0C(Two temperature sensors, 0.3 meters 1.5 meters)
*Power lead length: 28cm(Approx.)
*Frame size: 22 * 58 mm(Approx.)
*Installation hole size: 19.5 * 56 mm(Approx.)
Package Contents:
1*Car Clock
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

1 Set Needle Back Test Probes 5Pcs Electrical Measure Tool W/ 20pcs Replace Tips
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
*This acupuncture probe is a back-fixed, pierced and repairable probe.
*The kit includes 5 complete acupuncture probes, 2 screws and 20 replacement needles.
*The small tip can slide over the weatherproof seal to reach the probe connector.
*As acupuncture probes, they are used to pierce the insulation of wires to make automotive electrical measurements without damaging the wires.
*They can be used as tip probes when dealing with small circuit boards.
*This set of 5 probes also comes with 20 replacement pins, eliminating the need to replace the entire probe.
*The small diameter and super sharp pins make it ideal for piercing the insulation on small gauge wires.
Specifications:
*Probe color: black/blue/yellow/red/Greem
*Acupuncture probes: 5
*Replacement needles: 20
*Full probe length (1 piece): 65mm / 2.56in
*Pin length: 37mm / 1.45in
*Packing size: 12 * 7.5cm / 4.72 * 2.95in (L * W)
*Package weight: 23g / 0.81oz
Package Contents:
5 *Complete test probe
20 *Replace needle
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

LCD Lead Acid Li-Ion Capacity Indicator Monitor Multifunctions Meter Newest
Features:
100% brand new and high quality
Made of high-quality materials, durable
The surface is dustproof and waterproof, and the back cover is fully protected
Integrated display port, anti-piercing sunscreen, soft keys feel good
Color LCD material, clear light display, soft night display
Custom battery type, suitable for lead-acid, lithium battery, lifepo4, Ni-MH battery
Display the percentage of remaining power, voltage, temperature value (can be set to Celsius, Fahrenheit)
10-100V wide voltage input, reverse connection protection
Custom delay 10-120 seconds sleep
Shutdown sleep low power consumption
Simple installation, button-free screws
Low pressure alarm
High temperature alarm (shared built-in buzzer optional)
Real-time battery temperature detection (optional external temperature probe)
Open programming mode
Product parameters:
Specifications: 12V, 34V, 36V, 48V (optional)
Product size 61.5 * 33.5 * 13.5 mm (2.42 * 1.32 * 0.53 inches)
Installation size 58.5 * 28.5 mm (2.30 * 1.12 inches)
Display size 33 * 16.5 mm (1.30 * 0.65 inches)
Operating voltage 10V to 100 V
Working power 8/10 mA backlight on
Adjustable delay time 10~120S (10.20.30.60.120 seconds adjustable)
Sleep power consumption 15/20 uA 20V
Voltage accuracy ±0.1 /±0.5%
Temperature accuracy ±0.5 /±1°C built-in standard (external 30CM probe option)
Temperature range -19~80°C
Temperature range -2.2~179°F Fahrenheit
The overheating alarm can be adjusted from 0 to 79°C (1 second interval after overheating), and the buzzer temperature value flashes
The overheating alarm can be adjusted from 0 to 179°F (1 second interval after the overheating buzzer), the temperature value flashes
Low voltage alarm adjustable 10.5~60.0 V (1 second interval after low voltage buzzer) voltage value flashes
Working temperature -10~65°C
Package Included:
1 *Battery level indicator voltmeter with temperature display
1 * cable
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

LCD Lead Acid Li-Ion Capacity Indicator Monitor Multifunctions Meter Newest
Features:
100% brand new and high quality
Made of high-quality materials, durable
The surface is dustproof and waterproof, and the back cover is fully protected
Integrated display port, anti-piercing sunscreen, soft keys feel good
Color LCD material, clear light display, soft night display
Custom battery type, suitable for lead-acid, lithium battery, lifepo4, Ni-MH battery
Display the percentage of remaining power, voltage, temperature value (can be set to Celsius, Fahrenheit)
10-100V wide voltage input, reverse connection protection
Custom delay 10-120 seconds sleep
Shutdown sleep low power consumption
Simple installation, button-free screws
Low pressure alarm
High temperature alarm (shared built-in buzzer optional)
Real-time battery temperature detection (optional external temperature probe)
Open programming mode
Product parameters:
Specifications: 12V, 34V, 36V, 48V (optional)
Product size 61.5 * 33.5 * 13.5 mm (2.42 * 1.32 * 0.53 inches)
Installation size 58.5 * 28.5 mm (2.30 * 1.12 inches)
Display size 33 * 16.5 mm (1.30 * 0.65 inches)
Operating voltage 10V to 100 V
Working power 8/10 mA backlight on
Adjustable delay time 10~120S (10.20.30.60.120 seconds adjustable)
Sleep power consumption 15/20 uA 20V
Voltage accuracy ±0.1 /±0.5%
Temperature accuracy ±0.5 /±1°C built-in standard (external 30CM probe option)
Temperature range -19~80°C
Temperature range -2.2~179°F Fahrenheit
The overheating alarm can be adjusted from 0 to 79°C (1 second interval after overheating), and the buzzer temperature value flashes
The overheating alarm can be adjusted from 0 to 179°F (1 second interval after the overheating buzzer), the temperature value flashes
Low voltage alarm adjustable 10.5~60.0 V (1 second interval after low voltage buzzer) voltage value flashes
Working temperature -10~65°C
Package Included:
1 *Battery level indicator voltmeter with temperature display
1 * cable
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

LCD Lead Acid Li-Ion Capacity Indicator Monitor Multifunctions Meter Newest
Features:
100% brand new and high quality
Made of high-quality materials, durable
The surface is dustproof and waterproof, and the back cover is fully protected
Integrated display port, anti-piercing sunscreen, soft keys feel good
Color LCD material, clear light display, soft night display
Custom battery type, suitable for lead-acid, lithium battery, lifepo4, Ni-MH battery
Display the percentage of remaining power, voltage, temperature value (can be set to Celsius, Fahrenheit)
10-100V wide voltage input, reverse connection protection
Custom delay 10-120 seconds sleep
Shutdown sleep low power consumption
Simple installation, button-free screws
Low pressure alarm
High temperature alarm (shared built-in buzzer optional)
Real-time battery temperature detection (optional external temperature probe)
Open programming mode
Product parameters:
Specifications: 12V, 34V, 36V, 48V (optional)
Product size 61.5 * 33.5 * 13.5 mm (2.42 * 1.32 * 0.53 inches)
Installation size 58.5 * 28.5 mm (2.30 * 1.12 inches)
Display size 33 * 16.5 mm (1.30 * 0.65 inches)
Operating voltage 10V to 100 V
Working power 8/10 mA backlight on
Adjustable delay time 10~120S (10.20.30.60.120 seconds adjustable)
Sleep power consumption 15/20 uA 20V
Voltage accuracy ±0.1 /±0.5%
Temperature accuracy ±0.5 /±1°C built-in standard (external 30CM probe option)
Temperature range -19~80°C
Temperature range -2.2~179°F Fahrenheit
The overheating alarm can be adjusted from 0 to 79°C (1 second interval after overheating), and the buzzer temperature value flashes
The overheating alarm can be adjusted from 0 to 179°F (1 second interval after the overheating buzzer), the temperature value flashes
Low voltage alarm adjustable 10.5~60.0 V (1 second interval after low voltage buzzer) voltage value flashes
Working temperature -10~65°C
Package Included:
1 *Battery level indicator voltmeter with temperature display
1 * cable
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

LCD Lead Acid Li-Ion Capacity Indicator Monitor Multifunctions Meter Newest
Features:
100% brand new and high quality
Made of high-quality materials, durable
The surface is dustproof and waterproof, and the back cover is fully protected
Integrated display port, anti-piercing sunscreen, soft keys feel good
Color LCD material, clear light display, soft night display
Custom battery type, suitable for lead-acid, lithium battery, lifepo4, Ni-MH battery
Display the percentage of remaining power, voltage, temperature value (can be set to Celsius, Fahrenheit)
10-100V wide voltage input, reverse connection protection
Custom delay 10-120 seconds sleep
Shutdown sleep low power consumption
Simple installation, button-free screws
Low pressure alarm
High temperature alarm (shared built-in buzzer optional)
Real-time battery temperature detection (optional external temperature probe)
Open programming mode
Product parameters:
Specifications: 12V, 34V, 36V, 48V (optional)
Product size 61.5 * 33.5 * 13.5 mm (2.42 * 1.32 * 0.53 inches)
Installation size 58.5 * 28.5 mm (2.30 * 1.12 inches)
Display size 33 * 16.5 mm (1.30 * 0.65 inches)
Operating voltage 10V to 100 V
Working power 8/10 mA backlight on
Adjustable delay time 10~120S (10.20.30.60.120 seconds adjustable)
Sleep power consumption 15/20 uA 20V
Voltage accuracy ±0.1 /±0.5%
Temperature accuracy ±0.5 /±1°C built-in standard (external 30CM probe option)
Temperature range -19~80°C
Temperature range -2.2~179°F Fahrenheit
The overheating alarm can be adjusted from 0 to 79°C (1 second interval after overheating), and the buzzer temperature value flashes
The overheating alarm can be adjusted from 0 to 179°F (1 second interval after the overheating buzzer), the temperature value flashes
Low voltage alarm adjustable 10.5~60.0 V (1 second interval after low voltage buzzer) voltage value flashes
Working temperature -10~65°C
Package Included:
1 *Battery level indicator voltmeter with temperature display
1 * cable
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Meter Indicator Universal LCD Lead Acid Li-Ion Capacity Indicator Monitor
Features:
100% brand new and high quality
Made of high-quality materials, durable
The surface is dustproof and waterproof, and the back cover is fully protected
Integrated display port, anti-piercing sunscreen, soft keys feel good
Color LCD material, clear light display, soft night display
Custom battery type, suitable for lead-acid, lithium battery, lifepo4, Ni-MH battery
Display the percentage of remaining power, voltage, temperature value (can be set to Celsius, Fahrenheit)
10-100V wide voltage input, reverse connection protection
Custom delay 10-120 seconds sleep
Shutdown sleep low power consumption
Simple installation, button-free screws
Low pressure alarm
High temperature alarm (shared built-in buzzer optional)
Real-time battery temperature detection (optional external temperature probe)
Open programming mode
Product parameters:
Specifications: 12V, 34V, 36V, 48V (optional)
Product size 61.5 * 33.5 * 13.5 mm (2.42 * 1.32 * 0.53 inches)
Installation size 58.5 * 28.5 mm (2.30 * 1.12 inches)
Display size 33 * 16.5 mm (1.30 * 0.65 inches)
Operating voltage 10V to 100 V
Working power 8/10 mA backlight on
Adjustable delay time 10~120S (10.20.30.60.120 seconds adjustable)
Sleep power consumption 15/20 uA 20V
Voltage accuracy ±0.1 /±0.5%
Temperature accuracy ±0.5 /±1°C built-in standard (external 30CM probe option)
Temperature range -19~80°C
Temperature range -2.2~179°F Fahrenheit
The overheating alarm can be adjusted from 0 to 79°C (1 second interval after overheating), and the buzzer temperature value flashes
The overheating alarm can be adjusted from 0 to 179°F (1 second interval after the overheating buzzer), the temperature value flashes
Low voltage alarm adjustable 10.5~60.0 V (1 second interval after low voltage buzzer) voltage value flashes
Working temperature -10~65°C
Package Included:
1 *Battery level indicator voltmeter with temperature display
1 * cable
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Meter Indicator Universal LCD Lead Acid Li-Ion Capacity Indicator Monitor
Features:
100% brand new and high quality
Made of high-quality materials, durable
The surface is dustproof and waterproof, and the back cover is fully protected
Integrated display port, anti-piercing sunscreen, soft keys feel good
Color LCD material, clear light display, soft night display
Custom battery type, suitable for lead-acid, lithium battery, lifepo4, Ni-MH battery
Display the percentage of remaining power, voltage, temperature value (can be set to Celsius, Fahrenheit)
10-100V wide voltage input, reverse connection protection
Custom delay 10-120 seconds sleep
Shutdown sleep low power consumption
Simple installation, button-free screws
Low pressure alarm
High temperature alarm (shared built-in buzzer optional)
Real-time battery temperature detection (optional external temperature probe)
Open programming mode
Product parameters:
Specifications: 12V, 34V, 36V, 48V (optional)
Product size 61.5 * 33.5 * 13.5 mm (2.42 * 1.32 * 0.53 inches)
Installation size 58.5 * 28.5 mm (2.30 * 1.12 inches)
Display size 33 * 16.5 mm (1.30 * 0.65 inches)
Operating voltage 10V to 100 V
Working power 8/10 mA backlight on
Adjustable delay time 10~120S (10.20.30.60.120 seconds adjustable)
Sleep power consumption 15/20 uA 20V
Voltage accuracy ±0.1 /±0.5%
Temperature accuracy ±0.5 /±1°C built-in standard (external 30CM probe option)
Temperature range -19~80°C
Temperature range -2.2~179°F Fahrenheit
The overheating alarm can be adjusted from 0 to 79°C (1 second interval after overheating), and the buzzer temperature value flashes
The overheating alarm can be adjusted from 0 to 179°F (1 second interval after the overheating buzzer), the temperature value flashes
Low voltage alarm adjustable 10.5~60.0 V (1 second interval after low voltage buzzer) voltage value flashes
Working temperature -10~65°C
Package Included:
1 *Battery level indicator voltmeter with temperature display
1 * cable
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Meter Indicator Universal LCD Lead Acid Li-Ion Capacity Indicator Monitor
Features:
100% brand new and high quality
Made of high-quality materials, durable
The surface is dustproof and waterproof, and the back cover is fully protected
Integrated display port, anti-piercing sunscreen, soft keys feel good
Color LCD material, clear light display, soft night display
Custom battery type, suitable for lead-acid, lithium battery, lifepo4, Ni-MH battery
Display the percentage of remaining power, voltage, temperature value (can be set to Celsius, Fahrenheit)
10-100V wide voltage input, reverse connection protection
Custom delay 10-120 seconds sleep
Shutdown sleep low power consumption
Simple installation, button-free screws
Low pressure alarm
High temperature alarm (shared built-in buzzer optional)
Real-time battery temperature detection (optional external temperature probe)
Open programming mode
Product parameters:
Specifications: 12V, 34V, 36V, 48V (optional)
Product size 61.5 * 33.5 * 13.5 mm (2.42 * 1.32 * 0.53 inches)
Installation size 58.5 * 28.5 mm (2.30 * 1.12 inches)
Display size 33 * 16.5 mm (1.30 * 0.65 inches)
Operating voltage 10V to 100 V
Working power 8/10 mA backlight on
Adjustable delay time 10~120S (10.20.30.60.120 seconds adjustable)
Sleep power consumption 15/20 uA 20V
Voltage accuracy ±0.1 /±0.5%
Temperature accuracy ±0.5 /±1°C built-in standard (external 30CM probe option)
Temperature range -19~80°C
Temperature range -2.2~179°F Fahrenheit
The overheating alarm can be adjusted from 0 to 79°C (1 second interval after overheating), and the buzzer temperature value flashes
The overheating alarm can be adjusted from 0 to 179°F (1 second interval after the overheating buzzer), the temperature value flashes
Low voltage alarm adjustable 10.5~60.0 V (1 second interval after low voltage buzzer) voltage value flashes
Working temperature -10~65°C
Package Included:
1 *Battery level indicator voltmeter with temperature display
1 * cable
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Meter Indicator Universal LCD Lead Acid Li-Ion Capacity Indicator Monitor
Features:
100% brand new and high quality
Made of high-quality materials, durable
The surface is dustproof and waterproof, and the back cover is fully protected
Integrated display port, anti-piercing sunscreen, soft keys feel good
Color LCD material, clear light display, soft night display
Custom battery type, suitable for lead-acid, lithium battery, lifepo4, Ni-MH battery
Display the percentage of remaining power, voltage, temperature value (can be set to Celsius, Fahrenheit)
10-100V wide voltage input, reverse connection protection
Custom delay 10-120 seconds sleep
Shutdown sleep low power consumption
Simple installation, button-free screws
Low pressure alarm
High temperature alarm (shared built-in buzzer optional)
Real-time battery temperature detection (optional external temperature probe)
Open programming mode
Product parameters:
Specifications: 12V, 34V, 36V, 48V (optional)
Product size 61.5 * 33.5 * 13.5 mm (2.42 * 1.32 * 0.53 inches)
Installation size 58.5 * 28.5 mm (2.30 * 1.12 inches)
Display size 33 * 16.5 mm (1.30 * 0.65 inches)
Operating voltage 10V to 100 V
Working power 8/10 mA backlight on
Adjustable delay time 10~120S (10.20.30.60.120 seconds adjustable)
Sleep power consumption 15/20 uA 20V
Voltage accuracy ±0.1 /±0.5%
Temperature accuracy ±0.5 /±1°C built-in standard (external 30CM probe option)
Temperature range -19~80°C
Temperature range -2.2~179°F Fahrenheit
The overheating alarm can be adjusted from 0 to 79°C (1 second interval after overheating), and the buzzer temperature value flashes
The overheating alarm can be adjusted from 0 to 179°F (1 second interval after the overheating buzzer), the temperature value flashes
Low voltage alarm adjustable 10.5~60.0 V (1 second interval after low voltage buzzer) voltage value flashes
Working temperature -10~65°C
Package Included:
1 *Battery level indicator voltmeter with temperature display
1 * cable
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Meter Indicator Capacity Indicator Monitor Multifunction Universal Newest
Features:
100% brand new and high quality
Made of high-quality materials, durable
The surface is dustproof and waterproof, and the back cover is fully protected
Integrated display port, anti-piercing sunscreen, soft keys feel good
Color LCD material, clear light display, soft night display
Custom battery type, suitable for lead-acid, lithium battery, lifepo4, Ni-MH battery
Display the percentage of remaining power, voltage, temperature value (can be set to Celsius, Fahrenheit)
10-100V wide voltage input, reverse connection protection
Custom delay 10-120 seconds sleep
Shutdown sleep low power consumption
Simple installation, button-free screws
Low pressure alarm
High temperature alarm (shared built-in buzzer optional)
Real-time battery temperature detection (optional external temperature probe)
Open programming mode
Product parameters:
Specifications: 12V, 34V, 36V, 48V (optional)
Product size 61.5 * 33.5 * 13.5 mm (2.42 * 1.32 * 0.53 inches)
Installation size 58.5 * 28.5 mm (2.30 * 1.12 inches)
Display size 33 * 16.5 mm (1.30 * 0.65 inches)
Operating voltage 10V to 100 V
Working power 8/10 mA backlight on
Adjustable delay time 10~120S (10.20.30.60.120 seconds adjustable)
Sleep power consumption 15/20 uA 20V
Voltage accuracy ±0.1 /±0.5%
Temperature accuracy ±0.5 /±1°C built-in standard (external 30CM probe option)
Temperature range -19~80°C
Temperature range -2.2~179°F Fahrenheit
The overheating alarm can be adjusted from 0 to 79°C (1 second interval after overheating), and the buzzer temperature value flashes
The overheating alarm can be adjusted from 0 to 179°F (1 second interval after the overheating buzzer), the temperature value flashes
Low voltage alarm adjustable 10.5~60.0 V (1 second interval after low voltage buzzer) voltage value flashes
Working temperature -10~65°C
Package Included:
1 *Battery level indicator voltmeter with temperature display
1 * cable
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Meter Indicator Capacity Indicator Monitor Multifunction Universal Newest
Features:
100% brand new and high quality
Made of high-quality materials, durable
The surface is dustproof and waterproof, and the back cover is fully protected
Integrated display port, anti-piercing sunscreen, soft keys feel good
Color LCD material, clear light display, soft night display
Custom battery type, suitable for lead-acid, lithium battery, lifepo4, Ni-MH battery
Display the percentage of remaining power, voltage, temperature value (can be set to Celsius, Fahrenheit)
10-100V wide voltage input, reverse connection protection
Custom delay 10-120 seconds sleep
Shutdown sleep low power consumption
Simple installation, button-free screws
Low pressure alarm
High temperature alarm (shared built-in buzzer optional)
Real-time battery temperature detection (optional external temperature probe)
Open programming mode
Product parameters:
Specifications: 12V, 34V, 36V, 48V (optional)
Product size 61.5 * 33.5 * 13.5 mm (2.42 * 1.32 * 0.53 inches)
Installation size 58.5 * 28.5 mm (2.30 * 1.12 inches)
Display size 33 * 16.5 mm (1.30 * 0.65 inches)
Operating voltage 10V to 100 V
Working power 8/10 mA backlight on
Adjustable delay time 10~120S (10.20.30.60.120 seconds adjustable)
Sleep power consumption 15/20 uA 20V
Voltage accuracy ±0.1 /±0.5%
Temperature accuracy ±0.5 /±1°C built-in standard (external 30CM probe option)
Temperature range -19~80°C
Temperature range -2.2~179°F Fahrenheit
The overheating alarm can be adjusted from 0 to 79°C (1 second interval after overheating), and the buzzer temperature value flashes
The overheating alarm can be adjusted from 0 to 179°F (1 second interval after the overheating buzzer), the temperature value flashes
Low voltage alarm adjustable 10.5~60.0 V (1 second interval after low voltage buzzer) voltage value flashes
Working temperature -10~65°C
Package Included:
1 *Battery level indicator voltmeter with temperature display
1 * cable
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Meter Indicator Capacity Indicator Monitor Multifunction Universal Newest
Features:
100% brand new and high quality
Made of high-quality materials, durable
The surface is dustproof and waterproof, and the back cover is fully protected
Integrated display port, anti-piercing sunscreen, soft keys feel good
Color LCD material, clear light display, soft night display
Custom battery type, suitable for lead-acid, lithium battery, lifepo4, Ni-MH battery
Display the percentage of remaining power, voltage, temperature value (can be set to Celsius, Fahrenheit)
10-100V wide voltage input, reverse connection protection
Custom delay 10-120 seconds sleep
Shutdown sleep low power consumption
Simple installation, button-free screws
Low pressure alarm
High temperature alarm (shared built-in buzzer optional)
Real-time battery temperature detection (optional external temperature probe)
Open programming mode
Product parameters:
Specifications: 12V, 34V, 36V, 48V (optional)
Product size 61.5 * 33.5 * 13.5 mm (2.42 * 1.32 * 0.53 inches)
Installation size 58.5 * 28.5 mm (2.30 * 1.12 inches)
Display size 33 * 16.5 mm (1.30 * 0.65 inches)
Operating voltage 10V to 100 V
Working power 8/10 mA backlight on
Adjustable delay time 10~120S (10.20.30.60.120 seconds adjustable)
Sleep power consumption 15/20 uA 20V
Voltage accuracy ±0.1 /±0.5%
Temperature accuracy ±0.5 /±1°C built-in standard (external 30CM probe option)
Temperature range -19~80°C
Temperature range -2.2~179°F Fahrenheit
The overheating alarm can be adjusted from 0 to 79°C (1 second interval after overheating), and the buzzer temperature value flashes
The overheating alarm can be adjusted from 0 to 179°F (1 second interval after the overheating buzzer), the temperature value flashes
Low voltage alarm adjustable 10.5~60.0 V (1 second interval after low voltage buzzer) voltage value flashes
Working temperature -10~65°C
Package Included:
1 *Battery level indicator voltmeter with temperature display
1 * cable
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Meter Indicator Capacity Indicator Monitor Multifunction Universal Newest
Features:
100% brand new and high quality
Made of high-quality materials, durable
The surface is dustproof and waterproof, and the back cover is fully protected
Integrated display port, anti-piercing sunscreen, soft keys feel good
Color LCD material, clear light display, soft night display
Custom battery type, suitable for lead-acid, lithium battery, lifepo4, Ni-MH battery
Display the percentage of remaining power, voltage, temperature value (can be set to Celsius, Fahrenheit)
10-100V wide voltage input, reverse connection protection
Custom delay 10-120 seconds sleep
Shutdown sleep low power consumption
Simple installation, button-free screws
Low pressure alarm
High temperature alarm (shared built-in buzzer optional)
Real-time battery temperature detection (optional external temperature probe)
Open programming mode
Product parameters:
Specifications: 12V, 34V, 36V, 48V (optional)
Product size 61.5 * 33.5 * 13.5 mm (2.42 * 1.32 * 0.53 inches)
Installation size 58.5 * 28.5 mm (2.30 * 1.12 inches)
Display size 33 * 16.5 mm (1.30 * 0.65 inches)
Operating voltage 10V to 100 V
Working power 8/10 mA backlight on
Adjustable delay time 10~120S (10.20.30.60.120 seconds adjustable)
Sleep power consumption 15/20 uA 20V
Voltage accuracy ±0.1 /±0.5%
Temperature accuracy ±0.5 /±1°C built-in standard (external 30CM probe option)
Temperature range -19~80°C
Temperature range -2.2~179°F Fahrenheit
The overheating alarm can be adjusted from 0 to 79°C (1 second interval after overheating), and the buzzer temperature value flashes
The overheating alarm can be adjusted from 0 to 179°F (1 second interval after the overheating buzzer), the temperature value flashes
Low voltage alarm adjustable 10.5~60.0 V (1 second interval after low voltage buzzer) voltage value flashes
Working temperature -10~65°C
Package Included:
1 *Battery level indicator voltmeter with temperature display
1 * cable
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Needle Back Pinning Probes Needle Piercing Probes Set 5 Assorted W/ 20*needles
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
*This acupuncture probe is a back-fixed, pierced and repairable probe.
*The kit includes 5 complete acupuncture probes, 2 screws and 20 replacement needles.
*The small tip can slide over the weatherproof seal to reach the probe connector.
*As acupuncture probes, they are used to pierce the insulation of wires to make automotive electrical measurements without damaging the wires.
*They can be used as tip probes when dealing with small circuit boards.
*This set of 5 probes also comes with 20 replacement pins, eliminating the need to replace the entire probe.
*The small diameter and super sharp pins make it ideal for piercing the insulation on small gauge wires.
Specifications:
*Probe color: black/blue/yellow/red/Greem
*Acupuncture probes: 5
*Replacement needles: 20
*Full probe length (1 piece): 65mm / 2.56in
*Pin length: 37mm / 1.45in
*Packing size: 12 * 7.5cm / 4.72 * 2.95in (L * W)
*Package weight: 23g / 0.81oz
Package Contents:
5 *Complete test probe
20 *Replace needle
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Ammeter Tester Mobile Phone Charging Protector 1pcs 1pc 1x USB High Quality
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Solid and durable, long service life
*Easy to install and reliable to use
Specifications:
* Optional Color: Black ,White (As Pictures Show)
* Interface: USB3.0
* Material: ABS
* Current: 0-5.5A
* Voltage: 4-30V
* Time: 0-99 hours
* Power: 0-150W
* Capacity: 0-99999mAh
* Internal temperature: 0-80degree Celsius
* MA: 0-999999mWh
* MWh: 0-999999 MWh
* Charging resistance: 0-9999.9Ω
Package Contents:
1 x Tester
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Multifunction Car Clock Temperature Battery r Voltmeter DC 12V DIY 2018 Durable
Features:
*Made of high quality material, durable and practical to use
*100% brand new and high quality
*Multifunctional electronic clock module, set time, inside and outside temperature, voltage as one
*Can display a single item, or you can cycle through the items alternately and customize the item to be displayed
*Time chip using Epson's RX8025T chip, this chip is a temperature compensated clock chip, time accurate
*Standard 0.3 m 1.5 m module with two waterproof probes, temperature range -35 ~ 1200C
*With brightness adjustment, 3 brightness adjustable
*And automatic brightness function, can be dark at night, brighten during the day
Specifications:
*Optional Color: Red, Green, Blue(As Pictures Show)
*Working voltage: DC 5.0 ~ 28V
*Voltage display range: 5.0 ~ 28V
*Temperature display range: -35 ~ 120 0C(Two temperature sensors, 0.3 meters 1.5 meters)
*Power lead length: 28cm(Approx.)
*Frame size: 22 * 58 mm(Approx.)
*Installation hole size: 19.5 * 56 mm(Approx.)
Package Contents:
1*Car Clock
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Multifunction Car Clock Temperature Battery r Voltmeter DC 12V DIY 2018 Durable
Features:
*Made of high quality material, durable and practical to use
*100% brand new and high quality
*Multifunctional electronic clock module, set time, inside and outside temperature, voltage as one
*Can display a single item, or you can cycle through the items alternately and customize the item to be displayed
*Time chip using Epson's RX8025T chip, this chip is a temperature compensated clock chip, time accurate
*Standard 0.3 m 1.5 m module with two waterproof probes, temperature range -35 ~ 1200C
*With brightness adjustment, 3 brightness adjustable
*And automatic brightness function, can be dark at night, brighten during the day
Specifications:
*Optional Color: Red, Green, Blue(As Pictures Show)
*Working voltage: DC 5.0 ~ 28V
*Voltage display range: 5.0 ~ 28V
*Temperature display range: -35 ~ 120 0C(Two temperature sensors, 0.3 meters 1.5 meters)
*Power lead length: 28cm(Approx.)
*Frame size: 22 * 58 mm(Approx.)
*Installation hole size: 19.5 * 56 mm(Approx.)
Package Contents:
1*Car Clock
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Multifunction Car Clock Temperature Battery r Voltmeter DC 12V DIY 2018 Durable
Features:
*Made of high quality material, durable and practical to use
*100% brand new and high quality
*Multifunctional electronic clock module, set time, inside and outside temperature, voltage as one
*Can display a single item, or you can cycle through the items alternately and customize the item to be displayed
*Time chip using Epson's RX8025T chip, this chip is a temperature compensated clock chip, time accurate
*Standard 0.3 m 1.5 m module with two waterproof probes, temperature range -35 ~ 1200C
*With brightness adjustment, 3 brightness adjustable
*And automatic brightness function, can be dark at night, brighten during the day
Specifications:
*Optional Color: Red, Green, Blue(As Pictures Show)
*Working voltage: DC 5.0 ~ 28V
*Voltage display range: 5.0 ~ 28V
*Temperature display range: -35 ~ 120 0C(Two temperature sensors, 0.3 meters 1.5 meters)
*Power lead length: 28cm(Approx.)
*Frame size: 22 * 58 mm(Approx.)
*Installation hole size: 19.5 * 56 mm(Approx.)
Package Contents:
1*Car Clock
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

1pcs Tester USB Charger Ammeter Mobile Phone ABS Tester Voltmeter Durable
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Solid and durable, long service life
*Easy to install and reliable to use
Specifications:
* Optional Color: Black ,White (As Pictures Show)
* Interface: USB3.0
* Material: ABS
* Current: 0-5.5A
* Voltage: 4-30V
* Time: 0-99 hours
* Power: 0-150W
* Capacity: 0-99999mAh
* Internal temperature: 0-80degree Celsius
* MA: 0-999999mWh
* MWh: 0-999999 MWh
* Charging resistance: 0-9999.9Ω
Package Contents:
1 x Tester
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Input 24V AC PCB Board Adjustable Red 2mA-3A DC Regulated DIY 84*84mm Stock
Details:
* DC regulated power supply whose output voltage is continuously adjustable from 0 to 30V.
* Including a circuit to limit output current which enables output current to be continuously adjustable from 2mA to 3A.
* Providing current limiting, LED display, over load and short circuit protection.
* Input Voltage: 24V AC
* Input Current: Max 3A
* Output Voltage: 0-30V (continuously adjustable)
* Output Current: 2mA-3A (continuously adjustable)
* Output Voltage Ripple: Max 0.01%
* Material: PCB
* PCB Dimensions: approx. 84*84mm
Package contents:
1* Power Supply DIY Kit
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

PCB Board Power Supply DIY LED display Adjustable DC Regulated Durable
Details:
* DC regulated power supply whose output voltage is continuously adjustable from 0 to 30V.
* Including a circuit to limit output current which enables output current to be continuously adjustable from 2mA to 3A.
* Providing current limiting, LED display, over load and short circuit protection.
* Input Voltage: 24V AC
* Input Current: Max 3A
* Output Voltage: 0-30V (continuously adjustable)
* Output Current: 2mA-3A (continuously adjustable)
* Output Voltage Ripple: Max 0.01%
* Material: PCB
* PCB Dimensions: approx. 84*84mm
Package contents:
1* Power Supply DIY Kit
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Set Vacuum pressure gauge Accessories Measurement Manometer 5cm Practical
Features:
*0~-1bar 0~-30inHg 5cm Dial Manometer Mini Vacuum Pressure Gauge Meter
*Dual scale dial gauge design
*0~-30inHg or 0~-1bar measurement range
*With metal case to protect internal fittings
*Mini size for easy carrying
*100% brand new and high quality
Specifications:
*Optional QTY: 1pc, 2pcs, 5pcs
*Accuracy: /- 4/3/4%
*Dial Diameter: 5cm/2" (crimped housing)
*Proportion: double ratio - PSI / Article
*Movement: Copper alloy
*Bourdon tube: copper alloy
*Window: Glass
*Case: Steel case for protection in harsh environments
*Connection method: installation under copper alloy; 1/4" NPT
*Normal ambient temperature: -20degree Celsius~ 60degree Celsius (-4℉~ 140℉)
Package Contents (optional):
Package Contents 1:
1*Mini Vacuum Pressure Gauge
Package Contents 2:
2*Mini Vacuum Pressure Gauges
Package Contents 3:
5*Mini Vacuum Pressure Gauges
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Set Vacuum pressure gauge Accessories Measurement Meter Manometer Practical
Features:
*0~-1bar 0~-30inHg 5cm Dial Manometer Mini Vacuum Pressure Gauge Meter
*Dual scale dial gauge design
*0~-30inHg or 0~-1bar measurement range
*With metal case to protect internal fittings
*Mini size for easy carrying
*100% brand new and high quality
Specifications:
*Optional QTY: 1pc, 2pcs, 5pcs
*Accuracy: /- 4/3/4%
*Dial Diameter: 5cm/2" (crimped housing)
*Proportion: double ratio - PSI / Article
*Movement: Copper alloy
*Bourdon tube: copper alloy
*Window: Glass
*Case: Steel case for protection in harsh environments
*Connection method: installation under copper alloy; 1/4" NPT
*Normal ambient temperature: -20degree Celsius~ 60degree Celsius (-4℉~ 140℉)
Package Contents (optional):
Package Contents 1:
1*Mini Vacuum Pressure Gauge
Package Contents 2:
2*Mini Vacuum Pressure Gauges
Package Contents 3:
5*Mini Vacuum Pressure Gauges
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Glass Mini Vacuum Pressure Dual Scale Gauge Manometer Copper Alloy Replacement
Features:
*0~-1bar 0~-30inHg 5cm Dial Manometer Mini Vacuum Pressure Gauge Meter
*Dual scale dial gauge design
*0~-30inHg or 0~-1bar measurement range
*With metal case to protect internal fittings
*Mini size for easy carrying
*100% brand new and high quality
Specifications:
*Optional QTY: 1pc, 2pcs, 5pcs
*Accuracy: /- 4/3/4%
*Dial Diameter: 5cm/2" (crimped housing)
*Proportion: double ratio - PSI / Article
*Movement: Copper alloy
*Bourdon tube: copper alloy
*Window: Glass
*Case: Steel case for protection in harsh environments
*Connection method: installation under copper alloy; 1/4" NPT
*Normal ambient temperature: -20degree Celsius~ 60degree Celsius (-4℉~ 140℉)
Package Contents (optional):
Package Contents 1:
1*Mini Vacuum Pressure Gauge
Package Contents 2:
2*Mini Vacuum Pressure Gauges
Package Contents 3:
5*Mini Vacuum Pressure Gauges
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Features:
*0~-1bar 0~-30inHg 5cm Dial Manometer Mini Vacuum Pressure Gauge Meter
*Dual scale dial gauge design
*0~-30inHg or 0~-1bar measurement range
*With metal case to protect internal fittings
*Mini size for easy carrying
*100% brand new and high quality
Specifications:
*Optional QTY: 1pc, 2pcs, 5pcs
*Accuracy: /- 4/3/4%
*Dial Diameter: 5cm/2" (crimped housing)
*Proportion: double ratio - PSI / Article
*Movement: Copper alloy
*Bourdon tube: copper alloy
*Window: Glass
*Case: Steel case for protection in harsh environments
*Connection method: installation under copper alloy; 1/4" NPT
*Normal ambient temperature: -20degree Celsius~ 60degree Celsius (-4℉~ 140℉)
Package Contents (optional):
Package Contents 1:
1*Mini Vacuum Pressure Gauge
Package Contents 2:
2*Mini Vacuum Pressure Gauges
Package Contents 3:
5*Mini Vacuum Pressure Gauges
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Accessories Vacuum pressure gauge Measurement Meter Copper alloy Practical
Features:
*0~-1bar 0~-30inHg 5cm Dial Manometer Mini Vacuum Pressure Gauge Meter
*Dual scale dial gauge design
*0~-30inHg or 0~-1bar measurement range
*With metal case to protect internal fittings
*Mini size for easy carrying
*100% brand new and high quality
Specifications:
*Optional QTY: 1pc, 2pcs, 5pcs
*Accuracy: /- 4/3/4%
*Dial Diameter: 5cm/2" (crimped housing)
*Proportion: double ratio - PSI / Article
*Movement: Copper alloy
*Bourdon tube: copper alloy
*Window: Glass
*Case: Steel case for protection in harsh environments
*Connection method: installation under copper alloy; 1/4" NPT
*Normal ambient temperature: -20degree Celsius~ 60degree Celsius (-4℉~ 140℉)
Package Contents (optional):
Package Contents 1:
1*Mini Vacuum Pressure Gauge
Package Contents 2:
2*Mini Vacuum Pressure Gauges
Package Contents 3:
5*Mini Vacuum Pressure Gauges
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.