Kategóriák

Features:
*100% brand new high quality
*Made of high-quality materials, durable
*According to the LGPL license agreement, based on the design of OwOComm, SAA2 is a portable 3GHz vector network analyzer.
*It uses a user interface similar to NanoVNA, but uses a different technical architecture.
*It will not load the initial calibration data at startup, and will not automatically insert the calibration data after the user changes the frequency.
*After each startup and frequency change, you must recalibrate or recall the calibration data. Please read the instruction manual carefully before use to avoid damage to the equipment.
Specification:
*Frequency range: 50kHz-3GHz
*System dynamic range (correction): 70dB (up to 1.5GHz), 60dB (up to 3GHz)
*S11 noise level (correction): -50dB (up to 1.5GHz), -40dB (up to 3GHz)
*Scan speed: 100 points/sec
*Display: 2.8 inches, 320 x 240
*USB interface: Micro USB
*Power supply: USB, maximum charging current 1A
*Power connector: JST-XH 2.54mm
*Maximum scan point (on the device screen): 201
*Maximum scan point (USB): 1024
*Port 2 return loss (1.5GHz): 20dB typical
*Port 2 return loss (3GHz): minimum 13dB
*VNA-QT software compatible system: For Linux, For Windows (7 ), For Mac OS has been planned
Package Contents:
1 *S-A-A-2 host (built-in 1950mAh battery)
1 *USB data cable
2 *30cm SMA male to male SS405 RF cable
1 *SMA simple calibration kit OPEN
1 *SMA simple calibration kit SHORT
1 *SMA simple calibration kit LOAD
1 *SMA female to female connector
1 *EVA partial carrying bag
1 *Touch pen
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Vector Analyzer HF Network Antenna Analyzer Durable Practical Brand new
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
According to the license agreement for LGPL, based on the design for OwOComm, SAA2 is a portable 3GHz vector network analyzer.
It uses a user interface similar to NanoVNA, but uses a different technical architecture. It does not load initial calibration data at startup and does not automatically insert calibration data after users change frequency. Calibration data must be recalibrated or recalled after each startup and frequency change. Please read instruction manual carefully before use to avoid damage to the device.
Specifications:
Frequency Range: 50kHz-3GHz
System Dynamic Range (Calibration): 70dB (up to 1.5GHz), 60dB (up to 3GHz)
S11 Noise Level (Calibration): -50dB (up to 1.5GHz), -40dB (up to 3GHz)
Scanning Speed: 100 Points/Second
Display: 2.8 Inches, 320 x 240
USB Interface: Micro USB
Power Supply: USB, Maximum Charging Current 1A
Power Supply Connector: JST-XH 2.54mm
Maximum Scan Point (On Device Screen): 201
Maximum Scan Point (USB): 1024
Port 2 Return Loss (1.5GHz): 20dB typ
Port 2 return Loss (3GHz): 13dB MIN
VNA-QT software Compatible System: For Linux, For Windows (7 ), For Mac OS planned
Package Contents:
1 x S-A-A-2 Host
1 x Micro USB Data Cable
2 x 30cm SMA Male to Male SS405 Cables
1 x SMA Simple Calibration Kit OPEN
1 x SMA Simple Calibration Kit SHORT
1 x SMA Simple Calibration Kit LOAD
1 x SMA Female to Female Connector
1 x EVA Storage Bag
1 x Pick
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Analyzer UHF 50kHz-3GHz Vector Network Antenna Analyzer Durable Brand new
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
According to the license agreement for LGPL, based on the design for OwOComm, SAA2 is a portable 3GHz vector network analyzer.
It uses a user interface similar to NanoVNA, but uses a different technical architecture. It does not load initial calibration data at startup and does not automatically insert calibration data after users change frequency. Calibration data must be recalibrated or recalled after each startup and frequency change. Please read instruction manual carefully before use to avoid damage to the device.
Specifications:
Frequency Range: 50kHz-3GHz
System Dynamic Range (Calibration): 70dB (up to 1.5GHz), 60dB (up to 3GHz)
S11 Noise Level (Calibration): -50dB (up to 1.5GHz), -40dB (up to 3GHz)
Scanning Speed: 100 Points/Second
Display: 2.8 Inches, 320 x 240
USB Interface: Micro USB
Power Supply: USB, Maximum Charging Current 1A
Power Supply Connector: JST-XH 2.54mm
Maximum Scan Point (On Device Screen): 201
Maximum Scan Point (USB): 1024
Port 2 Return Loss (1.5GHz): 20dB typ
Port 2 return Loss (3GHz): 13dB MIN
VNA-QT software Compatible System: For Linux, For Windows (7 ), For Mac OS planned
Package Contents:
1 x S-A-A-2 Host
1 x Micro USB Data Cable
2 x 30cm SMA Male to Male SS405 Cables
1 x SMA Simple Calibration Kit OPEN
1 x SMA Simple Calibration Kit SHORT
1 x SMA Simple Calibration Kit LOAD
1 x SMA Female to Female Connector
1 x EVA Storage Bag
1 x Pick
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

FNIRSI 1C15 Portable 2.4-inch Digital Oscilloscope 500MS/s 110MHz Square Wave
Features:
100% brand new and high quality
FNIRSI-1C15 is a fully functional, practical and cost-effective handheld oscilloscope newly launched by FNIRSI.
The real-time sampling rate is 500M, and the analog bandwidth is 110MHz.
In addition to all the functions of a conventional handheld oscilloscope, we also added a one-key quick automatic function on this basis, so you can easily master the waveform like a desktop computer.
We added a 1k Hz self-checking square wave to FNIRSI-1C15, and the storage depth has been upgraded to 12kpts.
With reference to the waveform, you can pause at any time to save the previous frame waveform to the screen, and you can compare it with the currently refreshed waveform. The persistence and scroll mode make it easier to detect and record the waveform.
Built-in 3000mAH rechargeable battery, it can work continuously for more than 10 hours after fully charged.
The body is equipped with a high-quality silicone sleeve, which is non-slip and anti-drop.
The joystick replaces the original arrow keys, making the operation simpler and more effective.
Product parameters:
Model: FNIRSI-1C15
Number of channels: 1
Screen size: 2.4 inches
Screen resolution: 320 * 240
Analog bandwidth: 110M
Sampling rate: 500M
1k Hz self-check square wave: standby
Rise time: <3ns
Storage depth: 12 Kpts
Time base range: 5ns-10s
Vertical sensitivity: 20mv/div-100v/div
Trigger mode: automatic/normal
Trigger type: up/down
Display mode: YT/Scroll
Afterglow time: None/1s/∞
Charging method: 5V / 800mA
Voltage measurement range: ±40v (x1 file); ±400v (x10 file)
Channel coupling: AC-DC
One key automatic: standby
Waveform measurement: 14 types
Measurement accuracy: ±2%
Reference waveform: standby
Waveform save: standby
Frequency accuracy: ±0.01%
Packing list:
1 *Oscilloscope
1 *High voltage probe
1 *Alligator clip probe
1 *Data cable
1 *User Manual
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

FNIRSI 1C15 Portable 2.4 Digital Oscilloscope 500MS/s 110MHz Waveform Storage
Features:
100% brand new and high quality
FNIRSI-1C15 is a fully functional, practical and cost-effective handheld oscilloscope newly launched by FNIRSI.
The real-time sampling rate is 500M, and the analog bandwidth is 110MHz.
In addition to all the functions of a conventional handheld oscilloscope, we also added a one-key quick automatic function on this basis, so you can easily master the waveform like a desktop computer.
We added a 1k Hz self-checking square wave to FNIRSI-1C15, and the storage depth has been upgraded to 12kpts.
With reference to the waveform, you can pause at any time to save the previous frame waveform to the screen, and you can compare it with the currently refreshed waveform. The persistence and scroll mode make it easier to detect and record the waveform.
Built-in 3000mAH rechargeable battery, it can work continuously for more than 10 hours after fully charged.
The body is equipped with a high-quality silicone sleeve, which is non-slip and anti-drop.
The joystick replaces the original arrow keys, making the operation simpler and more effective.
Product parameters:
Model: FNIRSI-1C15
Number of channels: 1
Screen size: 2.4 inches
Screen resolution: 320 * 240
Analog bandwidth: 110M
Sampling rate: 500M
1k Hz self-check square wave: standby
Rise time: <3ns
Storage depth: 12 Kpts
Time base range: 5ns-10s
Vertical sensitivity: 20mv/div-100v/div
Trigger mode: automatic/normal
Trigger type: up/down
Display mode: YT/Scroll
Afterglow time: None/1s/∞
Charging method: 5V / 800mA
Voltage measurement range: ±40v (x1 file); ±400v (x10 file)
Channel coupling: AC-DC
One key automatic: standby
Waveform measurement: 14 types
Measurement accuracy: ±2%
Reference waveform: standby
Waveform save: standby
Frequency accuracy: ±0.01%
Packing list:
1 *Oscilloscope
1 *High voltage probe
1 *Alligator clip probe
1 *Data cable
1 *User Manual
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Professional Digital Oscilloscope 500MS/s Sampling Rate 110MHz Analog Bandwidth
Features:
100% brand new and high quality
Made of high-quality materials, durable
FNIRSI-1C15 is a fully functional, practical and cost-effective handheld oscilloscope newly launched by FNIRSI
The real-time sampling rate is 500M, and the analog bandwidth is 110MHz
In addition to all the functions of a conventional handheld oscilloscope, we also added a one-key quick auto function on this basis, so you can easily master the waveform like a desktop computer
We have added a 1k Hz self-checking square wave to FNIRSI-1C15, and the storage depth has been upgraded to 12kpts
Regarding the waveform, you can pause at any time to save the previous frame waveform to the screen, and you can compare it with the currently refreshed waveform. The persistence and scroll mode make it easier to detect and record the waveform
Built-in 3000mAH rechargeable battery, can work continuously for more than 10 hours after fully charged
The body is equipped with a high-quality silicone sleeve, which is non-slip and anti-drop
The joystick replaces the original arrow keys, making the operation simpler and more effective
Use scenario: car maintenance, etc.
Product parameters:
Model: FNIRSI-1C15
Screen size: 2.4 inches
Screen resolution: 320 * 240
Analog bandwidth: 110M
Sampling rate: 500M
1k Hz self-checking square wave: standby
Rise time: <3ns
Storage depth: 12 Kpts
Time base range: 5ns-10s
Vertical sensitivity: 20mv/div-100v/div
Trigger mode: automatic/normal
Trigger type: up/down
Display mode: YT/Scroll
Afterglow time: None/1s/∞
Charging method: 5V / 800mA
Voltage measurement range: ±40v (x1 file); ±400v (x10 file)
Channel coupling: AC-DC
One key automatic: standby
Waveform measurement: 14 types
Measurement accuracy: ±2%
Reference waveform: standby
Waveform save: standby
Frequency accuracy: ±0.01%
Quantity: 1
Package list:
1 *Oscilloscope
1 *High voltage probe
1 *Alligator clip probe
1 *Data cable
1 *User Manual
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

For FNIRSI-1C15 2.4" Handheld Digital Oscilloscope 500 MS/s Sampling Rate 110MHz
Features:
100% brand new and high quality
Made of high-quality materials, durable
FNIRSI-1C15 is a fully functional, practical and cost-effective handheld oscilloscope newly launched by FNIRSI
The real-time sampling rate is 500M, and the analog bandwidth is 110MHz
In addition to all the functions of a conventional handheld oscilloscope, we also added a one-key quick auto function on this basis, so you can easily master the waveform like a desktop computer
We have added a 1k Hz self-checking square wave to FNIRSI-1C15, and the storage depth has been upgraded to 12kpts
Regarding the waveform, you can pause at any time to save the previous frame waveform to the screen, and you can compare it with the currently refreshed waveform. The persistence and scroll mode make it easier to detect and record the waveform
Built-in 3000mAH rechargeable battery, can work continuously for more than 10 hours after fully charged
The body is equipped with a high-quality silicone sleeve, which is non-slip and anti-drop
The joystick replaces the original arrow keys, making the operation simpler and more effective
Use scenario: car maintenance, etc.
Product parameters:
Model: FNIRSI-1C15
Screen size: 2.4 inches
Screen resolution: 320 * 240
Analog bandwidth: 110M
Sampling rate: 500M
1k Hz self-checking square wave: standby
Rise time: <3ns
Storage depth: 12 Kpts
Time base range: 5ns-10s
Vertical sensitivity: 20mv/div-100v/div
Trigger mode: automatic/normal
Trigger type: up/down
Display mode: YT/Scroll
Afterglow time: None/1s/∞
Charging method: 5V / 800mA
Voltage measurement range: ±40v (x1 file); ±400v (x10 file)
Channel coupling: AC-DC
One key automatic: standby
Waveform measurement: 14 types
Measurement accuracy: ±2%
Reference waveform: standby
Waveform save: standby
Frequency accuracy: ±0.01%
Quantity: 1
Package list:
1 *Oscilloscope
1 *High voltage probe
1 *Alligator clip probe
1 *Data cable
1 *User Manual
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

500MS/s Digital Oscilloscope 110MHz Storage Inverter Auto Repair Newest
Features:
100% brand new and high quality
Made of high-quality materials, durable
FNIRSI-1C15 is a fully functional, practical and cost-effective handheld oscilloscope newly launched by FNIRSI
The real-time sampling rate is 500M, and the analog bandwidth is 110MHz
In addition to all the functions of a conventional handheld oscilloscope, we also added a one-key quick auto function on this basis, so you can easily master the waveform like a desktop computer
We have added a 1k Hz self-checking square wave to FNIRSI-1C15, and the storage depth has been upgraded to 12kpts
Regarding the waveform, you can pause at any time to save the previous frame waveform to the screen, and you can compare it with the currently refreshed waveform. The persistence and scroll mode make it easier to detect and record the waveform
Built-in 3000mAH rechargeable battery, can work continuously for more than 10 hours after fully charged
The body is equipped with a high-quality silicone sleeve, which is non-slip and anti-drop
The joystick replaces the original arrow keys, making the operation simpler and more effective
Use scenario: car maintenance, etc.
Product parameters:
Model: FNIRSI-1C15
Screen size: 2.4 inches
Screen resolution: 320 * 240
Analog bandwidth: 110M
Sampling rate: 500M
1k Hz self-checking square wave: standby
Rise time: <3ns
Storage depth: 12 Kpts
Time base range: 5ns-10s
Vertical sensitivity: 20mv/div-100v/div
Trigger mode: automatic/normal
Trigger type: up/down
Display mode: YT/Scroll
Afterglow time: None/1s/∞
Charging method: 5V / 800mA
Voltage measurement range: ±40v (x1 file); ±400v (x10 file)
Channel coupling: AC-DC
One key automatic: standby
Waveform measurement: 14 types
Measurement accuracy: ±2%
Reference waveform: standby
Waveform save: standby
Frequency accuracy: ±0.01%
Quantity: 1
Package list:
1 *Oscilloscope
1 *High voltage probe
1 *Alligator clip probe
1 *Data cable
1 *User Manual
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

500MS/s Digital Oscilloscope Storage Inverter Auto Repair Finished Newest
Features:
100% brand new and high quality
Made of high-quality materials, durable
FNIRSI-1C15 is a fully functional, practical and cost-effective handheld oscilloscope newly launched by FNIRSI
The real-time sampling rate is 500M, and the analog bandwidth is 110MHz
In addition to all the functions of a conventional handheld oscilloscope, we also added a one-key quick auto function on this basis, so you can easily master the waveform like a desktop computer
We have added a 1k Hz self-checking square wave to FNIRSI-1C15, and the storage depth has been upgraded to 12kpts
Regarding the waveform, you can pause at any time to save the previous frame waveform to the screen, and you can compare it with the currently refreshed waveform. The persistence and scroll mode make it easier to detect and record the waveform
Built-in 3000mAH rechargeable battery, can work continuously for more than 10 hours after fully charged
The body is equipped with a high-quality silicone sleeve, which is non-slip and anti-drop
The joystick replaces the original arrow keys, making the operation simpler and more effective
Use scenario: car maintenance, etc.
Product parameters:
Model: FNIRSI-1C15
Screen size: 2.4 inches
Screen resolution: 320 * 240
Analog bandwidth: 110M
Sampling rate: 500M
1k Hz self-checking square wave: standby
Rise time: <3ns
Storage depth: 12 Kpts
Time base range: 5ns-10s
Vertical sensitivity: 20mv/div-100v/div
Trigger mode: automatic/normal
Trigger type: up/down
Display mode: YT/Scroll
Afterglow time: None/1s/∞
Charging method: 5V / 800mA
Voltage measurement range: ±40v (x1 file); ±400v (x10 file)
Channel coupling: AC-DC
One key automatic: standby
Waveform measurement: 14 types
Measurement accuracy: ±2%
Reference waveform: standby
Waveform save: standby
Frequency accuracy: ±0.01%
Quantity: 1
Package list:
1 *Oscilloscope
1 *High voltage probe
1 *Alligator clip probe
1 *Data cable
1 *User Manual
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Digital Oscilloscope 110MHz Storage Inverter Detection Finished Replacement
Features:
100% brand new and high quality
Made of high-quality materials, durable
FNIRSI-1C15 is a fully functional, practical and cost-effective handheld oscilloscope newly launched by FNIRSI
The real-time sampling rate is 500M, and the analog bandwidth is 110MHz
In addition to all the functions of a conventional handheld oscilloscope, we also added a one-key quick auto function on this basis, so you can easily master the waveform like a desktop computer
We have added a 1k Hz self-checking square wave to FNIRSI-1C15, and the storage depth has been upgraded to 12kpts
Regarding the waveform, you can pause at any time to save the previous frame waveform to the screen, and you can compare it with the currently refreshed waveform. The persistence and scroll mode make it easier to detect and record the waveform
Built-in 3000mAH rechargeable battery, can work continuously for more than 10 hours after fully charged
The body is equipped with a high-quality silicone sleeve, which is non-slip and anti-drop
The joystick replaces the original arrow keys, making the operation simpler and more effective
Use scenario: car maintenance, etc.
Product parameters:
Model: FNIRSI-1C15
Screen size: 2.4 inches
Screen resolution: 320 * 240
Analog bandwidth: 110M
Sampling rate: 500M
1k Hz self-checking square wave: standby
Rise time: <3ns
Storage depth: 12 Kpts
Time base range: 5ns-10s
Vertical sensitivity: 20mv/div-100v/div
Trigger mode: automatic/normal
Trigger type: up/down
Display mode: YT/Scroll
Afterglow time: None/1s/∞
Charging method: 5V / 800mA
Voltage measurement range: ±40v (x1 file); ±400v (x10 file)
Channel coupling: AC-DC
One key automatic: standby
Waveform measurement: 14 types
Measurement accuracy: ±2%
Reference waveform: standby
Waveform save: standby
Frequency accuracy: ±0.01%
Quantity: 1
Package list:
1 *Oscilloscope
1 *High voltage probe
1 *Alligator clip probe
1 *Data cable
1 *User Manual
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

500MS/s Digital Oscilloscope Storage Inverter Auto Repair Finished Replacement
Features:
100% brand new and high quality
Made of high-quality materials, durable
FNIRSI-1C15 is a fully functional, practical and cost-effective handheld oscilloscope newly launched by FNIRSI
The real-time sampling rate is 500M, and the analog bandwidth is 110MHz
In addition to all the functions of a conventional handheld oscilloscope, we also added a one-key quick auto function on this basis, so you can easily master the waveform like a desktop computer
We have added a 1k Hz self-checking square wave to FNIRSI-1C15, and the storage depth has been upgraded to 12kpts
Regarding the waveform, you can pause at any time to save the previous frame waveform to the screen, and you can compare it with the currently refreshed waveform. The persistence and scroll mode make it easier to detect and record the waveform
Built-in 3000mAH rechargeable battery, can work continuously for more than 10 hours after fully charged
The body is equipped with a high-quality silicone sleeve, which is non-slip and anti-drop
The joystick replaces the original arrow keys, making the operation simpler and more effective
Use scenario: car maintenance, etc.
Product parameters:
Model: FNIRSI-1C15
Screen size: 2.4 inches
Screen resolution: 320 * 240
Analog bandwidth: 110M
Sampling rate: 500M
1k Hz self-checking square wave: standby
Rise time: <3ns
Storage depth: 12 Kpts
Time base range: 5ns-10s
Vertical sensitivity: 20mv/div-100v/div
Trigger mode: automatic/normal
Trigger type: up/down
Display mode: YT/Scroll
Afterglow time: None/1s/∞
Charging method: 5V / 800mA
Voltage measurement range: ±40v (x1 file); ±400v (x10 file)
Channel coupling: AC-DC
One key automatic: standby
Waveform measurement: 14 types
Measurement accuracy: ±2%
Reference waveform: standby
Waveform save: standby
Frequency accuracy: ±0.01%
Quantity: 1
Package list:
1 *Oscilloscope
1 *High voltage probe
1 *Alligator clip probe
1 *Data cable
1 *User Manual
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Equipment Voltage Tester Pen Wear-resistant 1AC-D Sensor Detector 90-1000V
Item Details:
*100% Brand new and high quality
*Color:As pictures show
*With lighting function, you can still operate in dark environment after tapping the front switch
*High-quality engineering plastics, than Shen Jianying, double the thickness of ordinary test pencils, wear-resistant and durable
Package Contents:
1*Voltage Tester Pen(No Battery)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

DC 100V 10A 50A 100A Voltmeter Ammeter LED Dual Digital Volt Amp Meter Detector
DC 100V 10A/50A/100A Voltmeter Ammeter LED Dual Digital Volt Amp Meter Gauge
Details:
* This voltmeter gauge can help you measure the voltage and current
* 100% Brand new and high quality
* Current Measuring range(optional): DC 0~10A,DC 0~50A,DC 0~100A (more than 10A need shunt!!!)
* The maximum input voltage can not exceed 30V. Otherwise the meter will be burned.
* DC 0-50A and DC0-100A voltage gauges come with a current shunt
* Working voltage of Meter itself: DC 4~30V
* Working current of Meter itself: ≤20mA
* Voltage Measuring range: DC 0-100V
* Voltage resolution (V): 0.1V
* Current resolution (A): 0.01A
* Measure accuracy: 1% (±1 digit)
* Display: 0.28" digital tube
* Refresh rate: about 300mS/ times
* Operation Temperature: -10degree Celsius~ 65degree Celsius
* Dimensions: approx. 48*29*26 mm/1.89*1.14*1.02 inch
Package contents:
Option1: 1* DC 100V 10A Voltmeter & Ammeter
Option2: 1* DC 100V 50A Voltmeter & Ammeter w/ 50A Current Shunt
Option3: 1* DC 100V 100A Voltmeter & Ammeter w/ 100A Current Shunt
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

DC 100V 10A 50A 100A Voltmeter Ammeter LED Dual Digital Volt Amp Meter Detector
DC 100V 10A/50A/100A Voltmeter Ammeter LED Dual Digital Volt Amp Meter Gauge
Details:
* This voltmeter gauge can help you measure the voltage and current
* 100% Brand new and high quality
* Current Measuring range(optional): DC 0~10A,DC 0~50A,DC 0~100A (more than 10A need shunt!!!)
* The maximum input voltage can not exceed 30V. Otherwise the meter will be burned.
* DC 0-50A and DC0-100A voltage gauges come with a current shunt
* Working voltage of Meter itself: DC 4~30V
* Working current of Meter itself: ≤20mA
* Voltage Measuring range: DC 0-100V
* Voltage resolution (V): 0.1V
* Current resolution (A): 0.01A
* Measure accuracy: 1% (±1 digit)
* Display: 0.28" digital tube
* Refresh rate: about 300mS/ times
* Operation Temperature: -10degree Celsius~ 65degree Celsius
* Dimensions: approx. 48*29*26 mm/1.89*1.14*1.02 inch
Package contents:
Option1: 1* DC 100V 10A Voltmeter & Ammeter
Option2: 1* DC 100V 50A Voltmeter & Ammeter w/ 50A Current Shunt
Option3: 1* DC 100V 100A Voltmeter & Ammeter w/ 100A Current Shunt
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

DC 100V 10A 50A 100A Voltmeter Ammeter LED Dual Digital Volt Amp Meter Detector
DC 100V 10A/50A/100A Voltmeter Ammeter LED Dual Digital Volt Amp Meter Gauge
Details:
* This voltmeter gauge can help you measure the voltage and current
* 100% Brand new and high quality
* Current Measuring range(optional): DC 0~10A,DC 0~50A,DC 0~100A (more than 10A need shunt!!!)
* The maximum input voltage can not exceed 30V. Otherwise the meter will be burned.
* DC 0-50A and DC0-100A voltage gauges come with a current shunt
* Working voltage of Meter itself: DC 4~30V
* Working current of Meter itself: ≤20mA
* Voltage Measuring range: DC 0-100V
* Voltage resolution (V): 0.1V
* Current resolution (A): 0.01A
* Measure accuracy: 1% (±1 digit)
* Display: 0.28" digital tube
* Refresh rate: about 300mS/ times
* Operation Temperature: -10degree Celsius~ 65degree Celsius
* Dimensions: approx. 48*29*26 mm/1.89*1.14*1.02 inch
Package contents:
Option1: 1* DC 100V 10A Voltmeter & Ammeter
Option2: 1* DC 100V 50A Voltmeter & Ammeter w/ 50A Current Shunt
Option3: 1* DC 100V 100A Voltmeter & Ammeter w/ 100A Current Shunt
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Details:
* 100% brand new and high quality
* Latest M328 version of the software, Atmega328 Chip
* 128*64 Big Backlight LCD Display
* Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET, diode (including double diode), thyristor, transistor, resistor and capacitor and other components
* Automatic test the pin of a component, and display on the LCD
* Can detect the transistor, MOSFET protection diode amplification coefficient and the base to determine the emitter transistor forward biased voltage
* Measure the gate and gate capacitance of the MOSFET threshold voltage
* Use 12864 liquid crystal display with green backlight
* One -button operation, automatic shutdown
* Only 20nA shutdown current.
* Automatically detect NPN, PNP bipolar transistors , N -channel and P -channel MOS FET, JFET , diodes, two diodes, thyristors small power unidirectional and bidirectional thyristor
* Automatic identification components pin arrangement
* Measuring bipolar transistor current amplification factor and base - emitter threshold voltage
* Through the base - emitter threshold voltage and high current amplification factor to identify Darlington transistors
* Can detect bipolar transistors and MOS transistors protection diodes
* Measuring the gate MOS FET threshold voltage and the gate capacitance
* Can simultaneously measure two resistors and resistor symbol is displayed
* Resistance measurement resolution is 0.1 ohms , 50M ohms can be measured .
* Can measure capacitanceCan measure capacitance of 30pF-100mF , resolution 1pF
* 2uF more capacitors can simultaneously measure the equivalent series resistance ESR values, the two can be displayed with a decimal value , resolution 0.01 ohms.
* Can be in the correct order and the diode symbol display two diodes , and gives the diode forward voltage.
* LED is detected as a diode forward voltage higher . Combo of the LED is identified as two diodes.
* Eeverse breakdown voltage is less than 4.5V Zener diode can be identified
* Can measure a single diode reverse capacitance
* Shell Material: Transparent Acrylic
Package Contents (optional):
Package 1#: 1*Transistor Tester
Package 2#: 1*Shell
Package 3#: 1*Transistor Tester 1*Shell
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Details:
* 100% brand new and high quality
* Latest M328 version of the software, Atmega328 Chip
* 128*64 Big Backlight LCD Display
* Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET, diode (including double diode), thyristor, transistor, resistor and capacitor and other components
* Automatic test the pin of a component, and display on the LCD
* Can detect the transistor, MOSFET protection diode amplification coefficient and the base to determine the emitter transistor forward biased voltage
* Measure the gate and gate capacitance of the MOSFET threshold voltage
* Use 12864 liquid crystal display with green backlight
* One -button operation, automatic shutdown
* Only 20nA shutdown current.
* Automatically detect NPN, PNP bipolar transistors , N -channel and P -channel MOS FET, JFET , diodes, two diodes, thyristors small power unidirectional and bidirectional thyristor
* Automatic identification components pin arrangement
* Measuring bipolar transistor current amplification factor and base - emitter threshold voltage
* Through the base - emitter threshold voltage and high current amplification factor to identify Darlington transistors
* Can detect bipolar transistors and MOS transistors protection diodes
* Measuring the gate MOS FET threshold voltage and the gate capacitance
* Can simultaneously measure two resistors and resistor symbol is displayed
* Resistance measurement resolution is 0.1 ohms , 50M ohms can be measured .
* Can measure capacitanceCan measure capacitance of 30pF-100mF , resolution 1pF
* 2uF more capacitors can simultaneously measure the equivalent series resistance ESR values, the two can be displayed with a decimal value , resolution 0.01 ohms.
* Can be in the correct order and the diode symbol display two diodes , and gives the diode forward voltage.
* LED is detected as a diode forward voltage higher . Combo of the LED is identified as two diodes.
* Eeverse breakdown voltage is less than 4.5V Zener diode can be identified
* Can measure a single diode reverse capacitance
* Shell Material: Transparent Acrylic
Package Contents (optional):
Package 1#: 1*Transistor Tester
Package 2#: 1*Shell
Package 3#: 1*Transistor Tester 1*Shell
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Details:
* 100% brand new and high quality
* Latest M328 version of the software, Atmega328 Chip
* 128*64 Big Backlight LCD Display
* Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET, diode (including double diode), thyristor, transistor, resistor and capacitor and other components
* Automatic test the pin of a component, and display on the LCD
* Can detect the transistor, MOSFET protection diode amplification coefficient and the base to determine the emitter transistor forward biased voltage
* Measure the gate and gate capacitance of the MOSFET threshold voltage
* Use 12864 liquid crystal display with green backlight
* One -button operation, automatic shutdown
* Only 20nA shutdown current.
* Automatically detect NPN, PNP bipolar transistors , N -channel and P -channel MOS FET, JFET , diodes, two diodes, thyristors small power unidirectional and bidirectional thyristor
* Automatic identification components pin arrangement
* Measuring bipolar transistor current amplification factor and base - emitter threshold voltage
* Through the base - emitter threshold voltage and high current amplification factor to identify Darlington transistors
* Can detect bipolar transistors and MOS transistors protection diodes
* Measuring the gate MOS FET threshold voltage and the gate capacitance
* Can simultaneously measure two resistors and resistor symbol is displayed
* Resistance measurement resolution is 0.1 ohms , 50M ohms can be measured .
* Can measure capacitanceCan measure capacitance of 30pF-100mF , resolution 1pF
* 2uF more capacitors can simultaneously measure the equivalent series resistance ESR values, the two can be displayed with a decimal value , resolution 0.01 ohms.
* Can be in the correct order and the diode symbol display two diodes , and gives the diode forward voltage.
* LED is detected as a diode forward voltage higher . Combo of the LED is identified as two diodes.
* Eeverse breakdown voltage is less than 4.5V Zener diode can be identified
* Can measure a single diode reverse capacitance
* Shell Material: Transparent Acrylic
Package Contents (optional):
Package 1#: 1*Transistor Tester
Package 2#: 1*Shell
Package 3#: 1*Transistor Tester 1*Shell
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

LCR-T4 M328 Version Transistor Tester Diode Triode Capacitance ESR Meter NPN,PNP
Details:
* 100% brand new and high quality
* Latest M328 version of the software, Atmega328 Chip
* 128*64 Big Backlight LCD Display
* Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET, diode (including double diode), thyristor, transistor, resistor and capacitor and other components
* Automatic test the pin of a component, and display on the LCD
* Can detect the transistor, MOSFET protection diode amplification coefficient and the base to determine the emitter transistor forward biased voltage
* Measure the gate and gate capacitance of the MOSFET threshold voltage
* Use 12864 liquid crystal display with green backlight
* One -button operation, automatic shutdown
* Only 20nA shutdown current.
* Automatically detect NPN, PNP bipolar transistors , N -channel and P -channel MOS FET, JFET , diodes, two diodes, thyristors small power unidirectional and bidirectional thyristor
* Automatic identification components pin arrangement
* Measuring bipolar transistor current amplification factor and base - emitter threshold voltage
* Through the base - emitter threshold voltage and high current amplification factor to identify Darlington transistors
* Can detect bipolar transistors and MOS transistors protection diodes
* Measuring the gate MOS FET threshold voltage and the gate capacitance
* Can simultaneously measure two resistors and resistor symbol is displayed
* Resistance measurement resolution is 0.1 ohms , 50M ohms can be measured .
* Can measure capacitanceCan measure capacitance of 30pF-100mF , resolution 1pF
* 2uF more capacitors can simultaneously measure the equivalent series resistance ESR values, the two can be displayed with a decimal value , resolution 0.01 ohms.
* Can be in the correct order and the diode symbol display two diodes , and gives the diode forward voltage.
* LED is detected as a diode forward voltage higher . Combo of the LED is identified as two diodes.
* Eeverse breakdown voltage is less than 4.5V Zener diode can be identified
* Can measure a single diode reverse capacitance
* Shell Material: Transparent Acrylic
Package Contents (optional):
Package 1#: 1*Transistor Tester
Package 2#: 1*Shell
Package 3#: 1*Transistor Tester 1*Shell
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

LCR-T4 M328 Version Transistor Tester Diode Triode Capacitance ESR Meter NPN,PNP
Details:
* 100% brand new and high quality
* Latest M328 version of the software, Atmega328 Chip
* 128*64 Big Backlight LCD Display
* Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET, diode (including double diode), thyristor, transistor, resistor and capacitor and other components
* Automatic test the pin of a component, and display on the LCD
* Can detect the transistor, MOSFET protection diode amplification coefficient and the base to determine the emitter transistor forward biased voltage
* Measure the gate and gate capacitance of the MOSFET threshold voltage
* Use 12864 liquid crystal display with green backlight
* One -button operation, automatic shutdown
* Only 20nA shutdown current.
* Automatically detect NPN, PNP bipolar transistors , N -channel and P -channel MOS FET, JFET , diodes, two diodes, thyristors small power unidirectional and bidirectional thyristor
* Automatic identification components pin arrangement
* Measuring bipolar transistor current amplification factor and base - emitter threshold voltage
* Through the base - emitter threshold voltage and high current amplification factor to identify Darlington transistors
* Can detect bipolar transistors and MOS transistors protection diodes
* Measuring the gate MOS FET threshold voltage and the gate capacitance
* Can simultaneously measure two resistors and resistor symbol is displayed
* Resistance measurement resolution is 0.1 ohms , 50M ohms can be measured .
* Can measure capacitanceCan measure capacitance of 30pF-100mF , resolution 1pF
* 2uF more capacitors can simultaneously measure the equivalent series resistance ESR values, the two can be displayed with a decimal value , resolution 0.01 ohms.
* Can be in the correct order and the diode symbol display two diodes , and gives the diode forward voltage.
* LED is detected as a diode forward voltage higher . Combo of the LED is identified as two diodes.
* Eeverse breakdown voltage is less than 4.5V Zener diode can be identified
* Can measure a single diode reverse capacitance
* Shell Material: Transparent Acrylic
Package Contents (optional):
Package 1#: 1*Transistor Tester
Package 2#: 1*Shell
Package 3#: 1*Transistor Tester 1*Shell
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

LCR-T4 M328 Version Transistor Tester Diode Triode Capacitance ESR Meter NPN,PNP
Details:
* 100% brand new and high quality
* Latest M328 version of the software, Atmega328 Chip
* 128*64 Big Backlight LCD Display
* Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET, diode (including double diode), thyristor, transistor, resistor and capacitor and other components
* Automatic test the pin of a component, and display on the LCD
* Can detect the transistor, MOSFET protection diode amplification coefficient and the base to determine the emitter transistor forward biased voltage
* Measure the gate and gate capacitance of the MOSFET threshold voltage
* Use 12864 liquid crystal display with green backlight
* One -button operation, automatic shutdown
* Only 20nA shutdown current.
* Automatically detect NPN, PNP bipolar transistors , N -channel and P -channel MOS FET, JFET , diodes, two diodes, thyristors small power unidirectional and bidirectional thyristor
* Automatic identification components pin arrangement
* Measuring bipolar transistor current amplification factor and base - emitter threshold voltage
* Through the base - emitter threshold voltage and high current amplification factor to identify Darlington transistors
* Can detect bipolar transistors and MOS transistors protection diodes
* Measuring the gate MOS FET threshold voltage and the gate capacitance
* Can simultaneously measure two resistors and resistor symbol is displayed
* Resistance measurement resolution is 0.1 ohms , 50M ohms can be measured .
* Can measure capacitanceCan measure capacitance of 30pF-100mF , resolution 1pF
* 2uF more capacitors can simultaneously measure the equivalent series resistance ESR values, the two can be displayed with a decimal value , resolution 0.01 ohms.
* Can be in the correct order and the diode symbol display two diodes , and gives the diode forward voltage.
* LED is detected as a diode forward voltage higher . Combo of the LED is identified as two diodes.
* Eeverse breakdown voltage is less than 4.5V Zener diode can be identified
* Can measure a single diode reverse capacitance
* Shell Material: Transparent Acrylic
Package Contents (optional):
Package 1#: 1*Transistor Tester
Package 2#: 1*Shell
Package 3#: 1*Transistor Tester 1*Shell
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Sale LCD 12/24/36/48V Lead-Acid Battery Status Volt Voltmeter Monitor Meter Tool
Features:
*12V 24V 36V 48V LCD Digital Display Voltmeter Power Capacity for 6-63V Car Lead-Acid and Lithium Battery
*Fits for 12V 24V 36V 48V lead-acid battery and 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 and 15 strings lithium batteries
*LCD dual displays power percentage voltage
*Displays the battery symbol percentage or the battery symbol voltmeter, and two display modes can be switched at random
*Has reverse connection protection and wrong connection will not burn out
*The electric button is equipped with the button to support the modification of the parameters and convenient to set, without the need for electric soldering iron
*Suitable for lead-acid battery and lithium battery, can be adjusted by the back button
*Two wires connection and with socket, easy to connect wire
*With the switch, can turn off the display
*100% Brand New and High Quality
Specifications:
*Shell Color: Black (As Pictures Show)
*Working Voltage: DC 6~63V
*Working Current: <5MA
*Dormant Power Consumption: 12uA
*Display Mode: LCD with Backlight
*Wire Length: 300mm/11.8 inches (Approx.)
*Dimension: 61.3*33.3*13.5mm/2.4*1.3*0.5 inches (Approx.)
*Mounting Dimension: 58.5*28.5mm/2.3*1.1 inches (Approx.)
Warm Tips:
1.It is designed according to the discharge curve, so the use of the discharge is relatively accurate
2.Fits for 3.6V/3.7V lithium batteries and 12V lead-acid battery, not fits for 3.2V lithium iron phosphate battery and 16V lead-acid battery
Package Contents:
1*Battery Capacity and Voltage Tester
1*Cable
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Features:
*12V 24V 36V 48V LCD Digital Display Voltmeter Power Capacity for 6-63V Car Lead-Acid and Lithium Battery
*Fits for 12V 24V 36V 48V lead-acid battery and 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 and 15 strings lithium batteries
*LCD dual displays power percentage voltage
*Displays the battery symbol percentage or the battery symbol voltmeter, and two display modes can be switched at random
*Has reverse connection protection and wrong connection will not burn out
*The electric button is equipped with the button to support the modification of the parameters and convenient to set, without the need for electric soldering iron
*Suitable for lead-acid battery and lithium battery, can be adjusted by the back button
*Two wires connection and with socket, easy to connect wire
*With the switch, can turn off the display
*100% Brand New and High Quality
Specifications:
*Shell Color: Black (As Pictures Show)
*Working Voltage: DC 6~63V
*Working Current: <5MA
*Dormant Power Consumption: 12uA
*Display Mode: LCD with Backlight
*Wire Length: 300mm/11.8 inches (Approx.)
*Dimension: 61.3*33.3*13.5mm/2.4*1.3*0.5 inches (Approx.)
*Mounting Dimension: 58.5*28.5mm/2.3*1.1 inches (Approx.)
Warm Tips:
1.It is designed according to the discharge curve, so the use of the discharge is relatively accurate
2.Fits for 3.6V/3.7V lithium batteries and 12V lead-acid battery, not fits for 3.2V lithium iron phosphate battery and 16V lead-acid battery
Package Contents:
1*Battery Capacity and Voltage Tester
1*Cable
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

AC Voltage Tester Pen 12V-1000V Non-Contact Volt Alert Sensor Detector Stick NEW
Features:
*AC 12V-1000V Multifunctional Voltage Detector Test Pen Electrical Tester
*AC 12V to 1000V adjustable voltage sensitivity
*High, Medium, Low, 3 kinds of automatic selection sensitivity
*Automatically distinguish the Zero Line and Fire line, safe to use
*Auto power off function
*Sound and LED alarm
*Non-contact test, easy to use
*Pull type battery cover design for exchanging battery easily
*Compact size, lightweight & portable
Specifications:
*Color: As Pictures Show
*Voltage Sensitivity: AC 12V~1000V
*Frequency: 50-60Hz
*Alarm Mode: Sound and light
*Flash Light: White
*Auto Power Off: Yes
*Battery: 2*1.5 V AAA Batteries (not included)
*Operating Temperature: 0~500C
*Storage Temperature: -20~600C
*Dimension: 15*2.6*2.4cm (Approx.)
Package Contents:
1*Voltage Detector Test Pen
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Features:
*AC 12V-1000V Multifunctional Voltage Detector Test Pen Electrical Tester
*AC 12V to 1000V adjustable voltage sensitivity
*High, Medium, Low, 3 kinds of automatic selection sensitivity
*Automatically distinguish the Zero Line and Fire line, safe to use
*Auto power off function
*Sound and LED alarm
*Non-contact test, easy to use
*Pull type battery cover design for exchanging battery easily
*Compact size, lightweight & portable
Specifications:
*Color: As Pictures Show
*Voltage Sensitivity: AC 12V~1000V
*Frequency: 50-60Hz
*Alarm Mode: Sound and light
*Flash Light: White
*Auto Power Off: Yes
*Battery: 2*1.5 V AAA Batteries (not included)
*Operating Temperature: 0~500C
*Storage Temperature: -20~600C
*Dimension: 15*2.6*2.4cm (Approx.)
Package Contents:
1*Voltage Detector Test Pen
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

2x 12V/24V Digital Voltage Gauge Volt LED Car System Battery Voltmeter Meter
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* 2Pcs 12-24V LED Cigarette Car Battery Volt Voltmeter Fuel Gauge Cigar Plug
* Powered by car cigarette lighter charger.
* Shows the voltage of the battery in the car.
* LED with high brightness, easy to use.
* Accurate and clear viewing, compact design.
* Helps extend and protect battery and engine life
Specification:
* Colour: Black(As pictures show)
* Screen Digital Color: Red(As pictures show)
* Voltage: for DC 12V or 24V Cars
* Measurement Range: DC 8V-30V /-% 1.2
* Tolerance: 0.1 ~ 0.3v
Installation:
1.Clean the cigar socket.
2.Plug the product's jack into the cigar socket.
Package Contents:
2 * Automotive Voltmeters
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

AC-12V-1000V Multifunctional Voltage Detector Test Pen VD801 Electrical Tester A
Features:
*AC 12V-1000V Multifunctional Voltage Detector Test Pen Electrical Tester
*AC 12V to 1000V adjustable voltage sensitivity
*High, Medium, Low, 3 kinds of automatic selection sensitivity
*Automatically distinguish the Zero Line and Fire line, safe to use
*Auto power off function
*Sound and LED alarm
*Non-contact test, easy to use
*Pull type battery cover design for exchanging battery easily
*Compact size, lightweight & portable
Specifications:
*Color: As Pictures Show
*Voltage Sensitivity: AC 12V~1000V
*Frequency: 50-60Hz
*Alarm Mode: Sound and light
*Flash Light: White
*Auto Power Off: Yes
*Battery: 2*1.5 V AAA Batteries (not included)
*Operating Temperature: 0~500C
*Storage Temperature: -20~600C
*Dimension: 15*2.6*2.4cm (Approx.)
Package Contents:
1*Voltage Detector Test Pen
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Features:
*Made of high quality material, durable and practical to use
*100% brand new and high quality
*Multifunctional electronic clock module, set time, inside and outside temperature, voltage as one
*Can display a single item, or you can cycle through the items alternately and customize the item to be displayed
*Time chip using Epson's RX8025T chip, this chip is a temperature compensated clock chip, time accurate
*Standard 0.3 m 1.5 m module with two waterproof probes, temperature range -35 ~ 1200C
*With brightness adjustment, 3 brightness adjustable
*And automatic brightness function, can be dark at night, brighten during the day
Specifications:
*Optional Color: Red, Green, Blue(As Pictures Show)
*Working voltage: DC 5.0 ~ 28V
*Voltage display range: 5.0 ~ 28V
*Temperature display range: -35 ~ 120 0C(Two temperature sensors, 0.3 meters 1.5 meters)
*Power lead length: 28cm(Approx.)
*Frame size: 22 * 58 mm(Approx.)
*Installation hole size: 19.5 * 56 mm(Approx.)
Package Contents:
1*Car Clock
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Features:
*Made of high quality material, durable and practical to use
*100% brand new and high quality
*Multifunctional electronic clock module, set time, inside and outside temperature, voltage as one
*Can display a single item, or you can cycle through the items alternately and customize the item to be displayed
*Time chip using Epson's RX8025T chip, this chip is a temperature compensated clock chip, time accurate
*Standard 0.3 m 1.5 m module with two waterproof probes, temperature range -35 ~ 1200C
*With brightness adjustment, 3 brightness adjustable
*And automatic brightness function, can be dark at night, brighten during the day
Specifications:
*Optional Color: Red, Green, Blue(As Pictures Show)
*Working voltage: DC 5.0 ~ 28V
*Voltage display range: 5.0 ~ 28V
*Temperature display range: -35 ~ 120 0C(Two temperature sensors, 0.3 meters 1.5 meters)
*Power lead length: 28cm(Approx.)
*Frame size: 22 * 58 mm(Approx.)
*Installation hole size: 19.5 * 56 mm(Approx.)
Package Contents:
1*Car Clock
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Features:
*Made of high quality material, durable and practical to use
*100% brand new and high quality
*Multifunctional electronic clock module, set time, inside and outside temperature, voltage as one
*Can display a single item, or you can cycle through the items alternately and customize the item to be displayed
*Time chip using Epson's RX8025T chip, this chip is a temperature compensated clock chip, time accurate
*Standard 0.3 m 1.5 m module with two waterproof probes, temperature range -35 ~ 1200C
*With brightness adjustment, 3 brightness adjustable
*And automatic brightness function, can be dark at night, brighten during the day
Specifications:
*Optional Color: Red, Green, Blue(As Pictures Show)
*Working voltage: DC 5.0 ~ 28V
*Voltage display range: 5.0 ~ 28V
*Temperature display range: -35 ~ 120 0C(Two temperature sensors, 0.3 meters 1.5 meters)
*Power lead length: 28cm(Approx.)
*Frame size: 22 * 58 mm(Approx.)
*Installation hole size: 19.5 * 56 mm(Approx.)
Package Contents:
1*Car Clock
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Pro LCD Car Lead-acid Lithium Battery Capacity Voltmeter Tester Indicator 12~48V
Features:
* This voltage type battery capacity tester can test the voltage and capacity of battery, and display them with intuitive battery symbol and percentage.
* A good helper for you to know the state of battery in time.
* With memory function.
* Designed for lithium batteries, lead-acid batteries which working voltage is from 5V to 70V.
* Suitable for mobile and portable equipments, e-bike, balance cars, cleaning machines, instruments, ups and so on.
Specifications:
* Material: ABS
* Rated capacity: 999 (mah)
* Standard voltage: 5-70 (V)
* Suitable temperature: -10~40degree Celsius
* Working power: 8mA
* Screen display: LCD
* Line length:20mm(approx)
* Overall dimension: about 57*30*12 mm/ 2.21*1.26*0.47 in
Package contents:
1* LCD Battery Capacity Voltmeter
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Item Details:
*DC 3-36V Car LCD Digital Electric Voltage Test Pen with LED Light
*LCD Digital display, easy to read
*Pure copper probe, good electrical conductivity, not easy to rust
*With TPU spring wire, good elasticity and pure copper alligator clip
*Used as car voltage measuring tool, durable and safe
*Easy to operate
*100% brand new and high quality
*Color: As Pictures Show
*Voltage Range: 3-36V
*Spring Line Extended Length: 1.65m (Approx.)
Package Contents:
1*Voltage Test Pen
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Details:
* DC regulated power supply whose output voltage is continuously adjustable from 0 to 30V.
* Including a circuit to limit output current which enables output current to be continuously adjustable from 2mA to 3A.
* Providing current limiting, LED display, over load and short circuit protection.
* Input Voltage: 24V AC
* Input Current: Max 3A
* Output Voltage: 0-30V (continuously adjustable)
* Output Current: 2mA-3A (continuously adjustable)
* Output Voltage Ripple: Max 0.01%
* Material: PCB
* PCB Dimensions: approx. 84*84mm
Package contents:
1* Power Supply DIY Kit
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Tool Car Voltage Digital Tester LCD Display with LED Lamp Kit Tracker Universal
Welcom to our store : shoppingfromeast
Use this car voltage digital tester to check the condition of the car circuit and cable system at each system without going to expensive mechanics. The digital voltage tester connects between the clip plug in seconds to detect bad cindition cable and circuit connections, defective points and bad cables or connections. Connects in seconds.
Details:
Troubleshoot circuit cable plug connections quickly
Easy to use
Connects in seconds
with LED lamp
LCD display
Package Contents:
1 * Car Voltage Digital Tester
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Digital Multimeter Multi-function Voltage Continuity Tester HP-38B Useful
Features:
*Multi-function Pen Type Digital Multimeter
*Can be used to test DC & AC voltage, resistance, positive diode voltage fall and audible continuity
*Adopts 2000 counts digit LCD monitor with character 12mm height, easy to read
*With auto range control function, over-range indication and low battery indication
*Auto power off function: it will switch to standby mode automatically after 15mins if there's no operation
*The toggle switch is used to select functions and ranges and other 3 keys to lock display value, turn on/off backlight, choose resistance, diode or continuity test, change units(DC or AC)
*The anti-slip cover with test probe slots can protect multimeter and organize probes as well
*Stable performance and anti-dropping design, durable and reliable
Specifications:
*Material: Plastic
*Display: LCD display with backlight
*DC Voltage Range: 200mV/2V/20V/200V/600V
*DC Voltage Resolution: 0.1mV/1mV/10mV/100mV/1V
*AC Voltage Range: 2V/20V/200V/600V
*AC Voltage Resolution: 1mV/10mV/100mV/1V
*Resistance Range: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ
*Resistance Resolution: 0.1Ω/1Ω/10Ω/100Ω/1kΩ/10kΩ
*Operating Temperature: 0~40 Degree Celsius (relative humidity<85% )
*Storage Temperature: -10~50 Degree Celsius (relative humidity<85% )
*Power Supply: 2*1.5V AAA RO3P batteries (not included)
*Screen dimension: 3.5*1.5cm (Approx.)
*Dimension: 25*7.5*2.5cm (Approx.)
Package Contents:
1*Digital Multimeter
1*User Manual
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

DC-DC Step Up Down Step-Up Power Supply Module Converter Voltage Adjustable USB
#1 Step Up Module
Description:The reverse voltage module MC34063A_NV is a chip based MC34063A for providing reverse voltage, negative voltage modules. It is capable of converting the 5V voltage to a voltage output of -5V. The output voltage can be adjusted by adjusting the potentiometer as required.
Features:
1. Using embedded technology of single chip microcomputer.
2. Input a positive voltage and output a negative voltage.
3. Easy to operate, the output voltage can be adjusted by a potentiometer.
4. The module is small, easy to carry and use in various occasions.
5. The IC internal switch tube of this module is 1.5A, but for safety and heat generation, the load power consumption of this module is recommended to be less than 0.5W.
Specification:Input voltage range: 3.6V-36V
Output voltage range: Negative 1.5V to negative 36V
Output voltage regulation characteristics; load regulation rate is less than 5%
Output current: The IC internal switch tube of this module is 1.5A, but for safety and heat generation, the load power consumption of this module is recommended to be less than 0.5W. That is, when the output is negative 5V, the load is within 100MA, and it is recommended to be 50MA.
Size: approx. 28 * 18 * 17mm / 1.1 * 0.71 * 0.67inch
Package list:1 * Module
Note:The higher the negative pressure of the output, the lower the load capacity.
#2 USB Step Up Module
Features:1. Applicable to USB5V powered devices such as mobile power, mobile phones, and tablets.
2. Load capacity up to Z-axis large output 3A. Support two mobile phones charging simultaneously.
3. It is fully functional affordable and practical.
4. Built to strict quality control standards, improved for more durability.
5. Fine workmanship, wear-resistance and corrosion-resistance.
Specifications:Input: 6V-40V
Output: 5V/3A (Maximum)
Efficiency: 92% (Maximum)
Switch frequency: 150KHZ
Working temperature: -40℃- 85℃
Size: Approx. 7*2*2cm/2.76*0.79*0.79inch
Package List:1 * Buck Voltage Regulator Module
#3 Dual USB Step Down Module
Features:1. The precise cutting and interface guarantee perfect suitability, suitable for installation in a replacement position.
2. Easy to install, adopts high quality materials to effectively avoid corrosion and abrasion, safe and durable.
3. Professional chipset provides superior performance in the system.
4. Simple operation, anti-aging and effectively extend the service life.
5. Only need to plug in USB or Micro USB to output the adjustable voltage from 1.2V to 24V and the power is 3W, which is suitable for technical engineers to develop and debug instruments.
6. One button to turn off the output, the digital tube can be closed. Store the state before power failure.
Specification:Item Type: Voltage Regulator Module
Material: ABS
Color: As Pictures Show
Input Voltage: 3.5V - 12V
Output Voltage: 1.2V - 24V
Item Size: 8 * 3 * 1cm / 3.1 * 1.2 * 0.4inch
Package List:1 * Voltage Regulator Module
#4 Step Down Module
Features:
· Accurate incisions and interfaces provide perfect applicability, easy to install.
· Adopts high-quality materials to avoid corrosion and wear effectively, durable to use.
· The professional chip set provides excellent performance in the system.
· Easy to operate, anti-aging and prolong service life.
· High quality electronic components, stable and reliable.
Specification:Item Type: Step-Down Module
Material: ABS
Color: As Pictures Shown
Item Size: Approx. 6.5 * 4.2 * 2.5 cm / 2.6 * 1.7 * 0.9 inch
Package List:1 * Module
Note:1. Keep the voltage difference between input and output above 2V.
2. Long-term working current is recommended within 5A, if the power is too large, please increase the fan or other ways to enhance heat dissipation.
3. This module is a step-down module, not a step-up module.

.layout-container,.row11 {margin: 0 auto;width: 750px;font-family: "Helvetica Neue", Helvetica, Arial, sans-serif;font-size: 14px;line-height: 20px;color: #333} img {max-width: 100% ; -ms-interpolation-mode: bicubic} .widget {word-break: break-word;word-wrap: break-word} .widget {width: auto !ant} .widget-text {font-size: 16px;font-family: arial, sans-serif;line-height: 1.6;color: #333;outline: 0;word-wrap: break-word} .widget-text > :first-child {margin-: 0} .widget-text > :-child {margin: 0} [class^=col-] {min-height: initial !ant} .tab-pane { padding-: 0; padding-right: 0; padding-bottom: 0; padding-left: 20px; margin-: 0; margin-right: 0; margin-bottom: 0; margin-left: 0; } .widget-text-84 { background-color: #7f7f7f; background-image: none; background-repeat: no-repeat; background-position: 0 0; padding-: 0; padding-right: 8px; padding-bottom: 8px; padding-left: 30px; border--left-radius: 0; border--right-radius: 0; border-bottom-right-radius: 0; border-bottom-left-radius: 0; margin-: 0; margin-right: 0; margin-bottom: 0; margin-left: 0; }
310pcs 2.54mm Pitch 1/2/2/3/4/5/6//8 Pin Connector Housing Male Male Female
Feature:1. Support for and Raspbery Pi projects, especially various plates.
2. Suitable for electronic prototyping design various connections.
3. for electrical appliances, development boards.
4. This kit comes with the most common jumper wire pin housings in addition to male and female crimp pins.
5. There are total 310PCS jumper wire connector parts, can meet different using needs.
Specification:
@font-face{ font-family:"Times New Roman"; } @font-face{ font-family:"宋体"; } @font-face{ font-family:"Calibri"; } p.MsoNormal{ mso-style-name:正文; mso-style-parent:""; margin:0pt; margin-bottom:.0001pt; mso-pagination:none; text-align:justify; text-justify:inter-ideograph; font-family:Calibri; mso-fareast-font-family:宋体; mso-bidi-font-family:'Times New Roman'; font-size:10.5000pt; mso-font-kerning:1.0000pt; } span.msoIns{ mso-style-type:export-only; mso-style-name:""; text-decoration:underline; text-underline:single; color:blue; } span.msoDel{ mso-style-type:export-only; mso-style-name:""; text-decoration:line-through; color:red; } @page{mso-page-border-surround-header:no; mso-page-border-surround-footer:no;}@page Section0{ } div.Section0{page:Section0;}
Condition: 100% Brand New
Item Type: Wire Jumper Connector
Size: 2.54MM
Quantity: 310PCS
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:
100 x Male Terminal
100 x Female Terminal
30 x Housing 1x1P
20 x Housing 1x2P
20 x Housing 1x3P
10 x Housing 1x4P
10 x Housing 1x5P
10 x Housing 1x6P
10 x Housing 1x8P

What this photosensitive resistor module can do: Automatic light detection, brightness detection, potentiometer can adjust the detection brightness valve point, and bring its own relay and delay function. When the light is darker than the brightness adjusted by the potentiometer, the relay switch is automatically turned on, and the light detection alarm can be done. , light control delay switch, brightness detection switch, can control various street lights, automatically turn on at night, automatic extinguishing during the day and auto headlights, stage lighting, , traffic light detection switch, product with delay adjustable and adjustable light sensitivity Function, light sensing without flicker.
Features:
Photosensitive Resistor Module - Stable and reliable quality.
Diode protection - The power supply part has diode protection, filter capacitor and anti-interference capacitor and 7805 voltage regulator chip, which can provide stable voltage and prevent the power supply from being reversed, and burn out the module.
Equipped with a precision adjustable potentiometer to better adjust the sensitivity and delay time.
There is a power indicator and a relay pull-in indication.
Equipped with a high-power relay to control the 10A current load.
The module comes with a 50cm long photoresistor sensor.
Comes with delay, which can adjust the delay time to solve the problem of the flashing of the relay at the point of the light.
Specification:Type: XH-M131 Photosensitive Resistor Module
Power supply: DC12V
Quiescent current: 15mA
Power consumption: 45mA
Relay load capacity: 30V 10A (DC)
Ambient temperature: < 80℃
Delay range: plug in . Delay 1-20 seconds adjustable, not inserted , 1-200 seconds adjustable.
Weight: Approx. 28g
Size: Approx. 53 * 30 * 18.5mm / 2.1 * 1.2 * 0.7in
Package list:1 * XH-M131
Instructions:1. Product wiring: first connect DC power supply to DC and DC- (such as 5V DC power supply if 5V). If the relay is to control 220V AC or different from the module power supply, please follow the first connection. If the relay is the same power source as the power supply, it can be simpler according to the second connection method;
2. Plug in the sensor probe and connect it to the DC power supply (to that the voltage meets the requirements, the polarity can NOT be reversed);
3. Delay adjustment method: The time range of plugging the jumper is 1-20 seconds, the time is not inserted is 1-200 seconds, the delay potentiometer will adjust the clockwise time longer, the reverse time will be shorter, when the sensitivity is adjusted , must adjust the delay to the shortest delay time of about 1 second (counterclockwise adjustment of about 10 circles);
4. Adjusting the sensitivity of the sensor: Adjust the sensitivity potentiometer in the light environment. If the sensor is used to cover the sensor head, the relay will pick up, let go of the delay and the relay is disconnected, and the module has the sensing function. If you want to adjust the sensitivity, adjust clockwise, the more sensitive the induction will be, the adjustable light will start the relay when it is dim, and the counterclockwise will adjust to the time when the light is in the relay, the relay will not pick up.
5. Delay time adjustment method: When clockwise adjustment, the delay time is extended.
Note: This connection can NOT be inserted into jumper , otherwise the module will be burned out.
Note:
This connection can NOT be inserted into jumper S1, otherwise the module will be burned out.
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

Features:
With voltmeter display and voltmeter self-calibrating. A more advanced voltage microprocessor is used, the voltmeter error is ±0.05V, and the range is 0-40V(To the accuracy of the voltmeter, please that the input voltage is above 4.5V).
Touch the button to switch the measurement input or output voltage, and indicator light will show which channel voltage is being measured, and save the settings, even if it is powered off and then on.
When you are not using the voltmeter, you can touch the left button to turn off the voltmeter.
Input voltage 4.0-40V, 1.25V-37V output voltage range is continuously adjustable (input voltage must be 1.5V higher than the output voltage).
Output power 20W, output current 3A, it is recommended to use within 2.0A, high current or more than 15W need to strengthen heat dissipation.
High conversion efficiency, averaging 88% (efficiency related to input, output voltage, current, voltage difference).
It has overheat protection and short circuit protection, with reverse connection protection, will not burn the motherboard.
Specification:Material:
Size: Approx. 6.1x3.4x1.2cm/2.40x1.34x0.47inch
Weight: Approx. 22g
Application Range:This module can be applied to the step-down field where the input voltage is higher than the output voltage, such as battery, power transformer, DIY adjustable power supply, 24V car laptop power supply, industrial equipment step-down, 12V to 3.3V, 12V to 5V, 24V to 5V, 24V to 12V, 36V to 24V, etc.
Onboard Voltmeter Self-Calibration Method:When the on-board voltmeter displays the output voltage, press and hold the right button for 2 seconds to release, and the voltmeter and output voltage indicator OUT flash synchronously0, at this time, the output voltage adjustment mode is entered. Similarly, when the voltmeter displays the input voltage, long press the right button for 2 seconds and then release, the voltmeter and the input voltage indicator IN flash synchronously, then enter the input voltage adjustment mode.
Lightly touched the right button, the voltage rises by one unit, lightly touched the left button, the voltage is reduced by one unit. Since the voltage value of one unit is less than 0.1V, you need to press 1-5 times continuously to see the voltmeter change 0.1V, the number of consecutive key presses depends on the currently displayed voltage value. The higher the current display voltage, the less the number of presses.
After the voltage adjustment is completed, long press the right button for 2 seconds and then release, then the voltage calibration mode can be exited, and all parameter settings are automatically powered down.
Package List:1 x Module
Note:This adjustment method allows you to obtain accurate voltage values over the entire voltage range with only one calibration. This feature is designed to meet your higher accuracy requirements.

Features:
High temperature arc igniter, with 6-12v high power, instant ignite cigarette & paper, can work for 20 seconds continuously, and high frequency, good quality, easy to use.
It can be used as high voltage source for high school science experiment, electronic instrument, negative ion generator and little science.
It can generate high temperature and high frequency arc, can easily ignite combustible.
According to the tesla coil principle, the module outputs high voltage pulse current, small volume and high efficiency.
The peripheral circuit is simple (simply connect the switch, Install the battery), the discharge intensity is violent.
Specifications:Size: Approx. 65 x 24 x 22mm / 2.6 x 0.9 x 0.9in
Input voltage: 6V-12V
Input Current: 0.5A-2A(depending on the input voltage)
Input line length: about 10cm/3.94inch
High Voltage type: DC type
Output voltage: about 80KV (please pay attention to safety when used)
Output current: 0.5A
Output line length: about 10cm/3.94inch
High voltage poles ignition distance: ≤1.5cm(1.5cm is maximum distance, 1cm is better)
Note:
1.Input the power of 6-12v, output two levels of terminal can produce 1.5cm length purple high temperature arc, instant ignition paper, single high voltage line can also discharge of any metal body, working without a crack sound.
2.On the input power: 3.7-v lithium battery can be used in series, such as 18650 battery, idle cell phone battery (to remove the protection board, recommended capacity above 2000mAh) or Nickel-cadmium/Nimh battery pack, 4V or 12V lead Acid batteries(12V battery works best)
Module Usage Precautions:
1. Avoid power on when No load. You must adjust the appropriate distance for high-voltage terminal before power on, high-voltage line arc distance is proportional to the battery voltage and capacity.
2. The test arc distance from the short to long experimental, It is prohibited exceed the maximum arcing distance(<1.5cm,1cm is OK). Otherwise, energy can not be released due to high voltage, easily damaged modules.
3. The module power, the internal is not easy for heat dissipation, so it can not work for a long time.
4.To determine whether the battery capacity can drive the maximum output power is the way to measure the battery voltage whenin the arc state.
5. Small capacityseries lithium battery is 7.2 V, voltage will drop to about 4V when arcing, the smaller the capacity, the lower the voltage will become. It is recommended to use above 2000MA lithium, it is better to choose above 4000MA battery.
Package Included:
1 x High Voltage Pulse Generator
Note:
1.The power time is not above 20 seconds each time. Since the output power is strong, it must be driven by rechargeable battery or storage battery. Improper voltage and long work will easily damage the high voltage module. Be careful when testing and using!
2. Ignite distance keep within 1cm, please.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:
Designed with voltmeter, voltmeter error is ±0.1V, measuring range is 5V~35V.
button switch changes measurement of input or output voltage, and there is indicator light shows which voltage is measured.
Input and output have screw terminals for convenient connection even with no soldering iron, and keep solder pad for soldering connection.
The maximum output current can be up to 4A; it is recommended that the working current in about 2A, and add heat sink please if more than 2A.
Using the internal oscillation frequency of 400kHz, belong to second generation of the switch voltage regulator, low consumption, high efficiency.
Widely used for storage battery, power , DIY adjustable regulated power supply, industrial equipment, 9 to 12V, 12V to 18V, 18V to 24V, etc.
Specifications:
Input Voltage: 4.5V-32V
Output Voltage: 5V-35V (adjustable)
Max. Output Current: 4A
Efficiency: <92%
Output Ripple: <30mV
Switch Frequency: 400kHz
Operating Temperature: -40℃~ 85℃
Size: 66*36*14mm/2.59*1.41*0.55"
Instruction:1. For the first time powering on, the default display is input voltage, and the input indicator IN lights up.Press the button, then it displays output voltage, and the output indicator OUT lights up.The last setting will be saved, even if power off and restart.
2. Input output voltage measurement error calibration:Press and hold button switch for more than 4 seconds then release to enter voltage measurement error calibration function, indicator IN lights up(input voltage calibration), and display flickeringly shows calibration value (default is 0.0). Press button to change this value (range of -0.5V to 0.5V)After adjustment of the input voltage calibration value, press and hold button for more than 2 second then release to enter the output voltage error calibration function, indicator OUT lights up (output voltage calibration), and display calibration value. Adjustment method is the same as the input adjustment. After adjustment, press and hold button for more than 2 seconds then release to save set value and return normal voltage displaying.The calibration value is enabled immediately and saved when power failure.(This function can provide higher accuracy)
3. Turn off the voltmeter:Press and hold switch for more than 1 second while less than 4 seconds then release to turn off voltmeter.Voltmeter will be turned on if press switch after it is turned off.
Note:1. If input voltage is lower than 4.5V, the voltmeter will not work and display.
2. Input voltage must be at least 1V higher than output voltage.
3. When power is over 20W, a heat sink is recommended to enhance heat dissipation.
4. If output voltage is always equals to input voltage and cannot be adjusted,turn potentiometer more than 10 circles counterclockwise please, then voltage can be adjusted normally.
Package Includes:
1 x Boost Converter Module

Product Name: PCB Terminal Block
Rated Value: 300V 16A; Poles: 2 Pin; Pitch: 5.08mm/ 0.2"
Dimension: 1.7 x 1.1 x 0.9cm/ 0.6" x 0.4" x 0.3" (L*W*H)
Material: Plastic, Electric Parts; Color: Silver Tone, Blue
Net Weight: 11.7g
2 pin poles, 5.08mm pitch, screw PCB terminal blcok connector.
PCB terminal is widely used in almost all electronic equipment, such as small eletronic watches, calculators, general computer, communication electronics equipment, weapon systems, etc.
Package Content: 5 x PCB Terminal Block
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Product Name : Pin Header
Position : 40
Row : 1;Mounting Angle : Right Angle
Pin Distance : 2.54mm/0.1'';Total Size : 100 x 7 x 7mm/3.9'' x 0.27'' x 0.27''(L*W*H)
Material : Plastic, Metal
Single row, right angle, male pin header, electric component, is easy to install.
This pin header is a ideal socket connector for the PCB board and intergrated circuit, is used widely in the computer and breadboard
Color : Black
Net Weight : 15g;
Package Content : 5 x Right Angle Pin Header
Note:Light shooting and differnent displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Gender of Connector: Female
Number of Row : Single
Type of connector: Straight
Length: 6Pins
Gender of Connector:Female
Number of Row:Single
Type of connector:Straight
Pitch:2.54mm
Pin Length:4mm
Color:Black
Package includes: 10 x Single Row Straight Header(Size for choice)
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Product name: Battery connection
Fits: 9V battery (battery not included)
Material: Faux Leather, Metal
Color: black, red
Weight: 5g
9V wired clip battery connector, features faux leather shell, 2-wire connector, black red in color.
Simple operation, compact size, perfect as a replacement for your old or damaged.
Battery not included here.
Voltage: DC3-12V
Size: 3 x 1.5x 0.7cm / 1.2 inch x 0.6 inch x 0.28 inch (L * W * T)
Cable Length: 15cm /5.9 inch
Delivery: 2 x 9V battery connectors
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

2X(Product Name: PCB Terminal Block
Rated Value: 300V 16A; Poles: 2 Pin; Pitch: 5.08mm/ 0.2"
Dimension: 1.7 x 1.1 x 0.9cm/ 0.6" x 0.4" x 0.3" (L*W*H)
Material: Plastic, Electric Parts; Color: Silver Tone, Blue
Net Weight: 11.7g
2 pin poles, 5.08mm pitch, screw PCB terminal blcok connector.
PCB terminal is widely used in almost all electronic equipment, such as small eletronic watches, calculators, general computer, communication electronics equipment, weapon systems, etc.
Package Content: 5 x PCB Terminal Block
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.)

2X(Product Name: PCB Terminal Block
Rated Value: 300V 16A; Poles: 2 Pin; Pitch: 5.08mm/ 0.2"
Dimension: 1.7 x 1.1 x 0.9cm/ 0.6" x 0.4" x 0.3" (L*W*H)
Material: Plastic, Electric Parts; Color: Silver Tone, Blue
Net Weight: 11.7g
2 pin poles, 5.08mm pitch, screw PCB terminal blcok connector.
PCB terminal is widely used in almost all electronic equipment, such as small eletronic watches, calculators, general computer, communication electronics equipment, weapon systems, etc.
Package Content: 5 x PCB Terminal Block
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.)

* 5 Pcs 40 Position Single Row Right Angle Pin Header
* Single row, right angle, male pin header, electric component, is easy to install.
* This pin header is a ideal socket connector for the PCB board and intergrated circuit, is used widely in the computer and breadboard.
* Color : Black
* Net Weight : 15g;
* Package Content : 5 x Right Angle Pin Header UPC 4894462016268 EAN 4894462016268 IABN 4894462016268 MPN Does not apply Brand Unbranded

Each terminal is rolled and the seam is butted.
This seam can not possibly open under normal conditions of stress or wire pull.
Designed with full port barrel, Ideal for difficult to crimp solid wires or stranded wires.
Suitable for the connection in power cable with electrical equipments.
Used widely in the machinery, electric power, railway, shipbuilding, aviation, home appliance, computer or other automatic equipments.
Product Name : Male Spade Terminal Connector
Material : Metal
Fit Stud Width : 2.8mm / 7/64“
Total Size : 21 x 2 x 3mm / 0.83" x 0.08" x 0.12"(LWH)
Fit Cable Diameter : 2mm /0.08"
Main Color : Gold Tone
Weight : 4g
Package Content : 10 x Male Spade Terminal Connector
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.The measurement allowed error is /-1-3 cm.

Product Name : Ceramic Disc Capacitor;Features : Low Voltage
Withstand Voltage : DC 50V;Capacitance : 0.1uF
Capacitance Tolerance : 80% -20% ;Lead Pitch Spacing : 2mm / 0.07"
Body Dimension(Each) : 0.6 x 0.6 x 0.2cm / 0.2" x 0.2" x 0.08"(L *W*T);Weight : 5g
Color : As Picture Show;Package Content : 30 x Ceramic Disc Capacitors
Description: 0.1uF Capacitance , 50V DC Withstand Voltage and 80% -20% Capacitance Tolerance.
DIP(Dual in-line Package) Mounting Type, Through Hole Leads, Low Voltage, Disc Capacitors.
Use in low voltage applications that are DC powered.
Material: Ceramic
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.