Kategóriák

Feature:1. Magnet at the brush end makes it easier to remove and insert hearing aid batteries.
2. Multifunctional cleaning tool, very suitable to keep the cleaning of hearing aid.
3. Use the wax loop to gently remove the wax from in‑the‑ear hearing aids. can also be used to adjust the volume of ITC or ITE hearing aids.
4. Wonderful accessory to cleaning wax or debris from the of the hearing aids.
5. Including 20pcs hearing aids cleaning brush of the package, meeting different demands.
Specification:
Condition: 100% Brand New
Item Type: Hearing Aid Cleaning Brush
Material: Plastic Metal
Function:Brush: Brush wax or skin particles from the of a hearing aid or earplug
Wax Loop: Gently remove wax from the ear hearing aid
Magnet: Make it easier to remove and insert hearing aid batteries
Single Brush Size: Approx. 4.8 x 1.2 x 0.4cm / 1.9 x 0.5 x 0.2in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:20 x Brush

Feature:1. Easy to clean, beautifully looking,useful and practical.
2. The gas lamp is suitable for bottled or piped natural gas/gas/liquefied petroleum gas.
3. Laboratory quality gas stove, aluminum burner mixing tube, brass flame stabilizer, and a die-cast zinc alloy base.
4. This is a natural gas model for laboratory heating.
5. The single-tube gas lamp is a kind of energy-saving gas lamp with good combustion and strong flame.
Specification:
Item Type:Bunsen Burner
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:
1 x Base
1 x Rod

Feature:1. Lightweight and portable, foldable, the curtain is with 8 sets of non-adhesive small hooks, easy to install.
2. 100% polyester, the folding package is small in size without creases, and the effect is very good!
3. Perforated around, it is easy to up, and it is made of materials in high quality.
4. Also it is suitable for outdoor camping, open-air movies, and you can shoot back.
5. Polyester elastic material is with good color reproduction and viewing angle.
Specification:
Item Type: Projector curtain
Color: White black
Black Border Width: Approx. 3cm / 1.2in
Aspect Ratio: 4:3
Material
NameAspect
RatioSize
Inch / CMVisible Size
CM / INBlack Border
Width
CMNumber
of Holes
/PCsAccessories
Hook (8 sets of hooks
per pack
film,
approx. 20 g
/ 0.7 oz/pack)Lanyard (2 PCS/ pack,
each approx. 5m / 16.4ft
long,approx.60 g / 2.1 oz/pack)
Thick
Polyester4:3
ratioApprox.40 in / 101.6 cmApprox. 81 x 61cm
/ 31.89 x 24.02inApprox. 3cm
/ 1.2 in411
Approx. 60 in / 152.4 cmApprox. 122 x 91cm
/ 48.03 x 35.83inApprox. 3cm
/ 1.2 in411
Approx. 72 in /182.88 cmApprox. 146 x 110cm
/ 57.48 x 43.31inApprox. 3cm
/ 1.2 in411
Approx. 84 in /213.36 cmApprox. 171 x 128cm
/ 67.3 x 50.4inApprox. 3cm
/ 1.2 in611
Approx. 100 in / 245 cmApprox. 203 x 152cm
/ 79.9 x 59.8inApprox. 3cm
/ 1.2 in611
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Screen
8 x Hook
8 x Film
2 x Cord

Feature:1. Used for the connection of copper conductors of electrical cables with electrical equipment.
2. Tinned , features ‑55℃‑150℃ long‑term working temperature.
3. Wide application, can be used for boats, automobiles and other circuits.
4. Including 60pcs wire terminals with various specification, meet oyur different needs.
5. Made of high quality T2 red copper, excellent corrosion resistance, long durability.
Specification:
Condition: 100% Brand New
Item Type: Wire Terminals
Material: T2 Red Copper (Silver Copper Silver CuAg: ≥99.9)
Color: As picture shown
Scope of Application: Widely used in boats, automobiles and other circuits
Specification:SC6-6-10pcs, SC6-8-10pcs SC10-6-10pcs, SC10-8-10pcs SC16-6-5pCs, SC16-8-5pcsSC25-6-5pcs, SC25-8-5pcs
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:60 x Wire Terminals

Features:
Made of high quality polypropylene material, heat resistant, corrosion resistant, healthy and non-toxic.
Large capacity, can accommodate 94 pipettes, easy to use, very practical.
It can accommodate many different sizes of pipettes and can accommodate up to 0.50 inch (12.7 mm) pipettes.
This product can help autoclave and have strong chemical resistance.
This pipette is mostly used in laboratories and can also be used in hospitals.
Specification:Condition: 100% Brand New
Material: Polypropylene
Color: Red
Weight: Approx. 313g / 11oz
Base Diameter: Approx. 9in (228mm)
Height: Approx. 19in (482mm)
Package List:1 x Pipette Stand (Composed of five parts)

Feature:1. This product is a milling cutter that meets the high requirements of woodworking and hardware.
2. With high hardness, accurate positioning, smoothly cutting and impact resistance.
3. Wide range of applications, suitable for woodworking machine tools and engraving machines, etc.
4. There are four specifications of milling cutters, which can meet your needs.
5. Small size, easy to carry and store, convenient to use and with good performance.
Specification:
Item Type: Woodworking Router Bits Set
Material: Tungsten steel
Model: 4Pcs 8 shank sharpen nose knife
Shank Diameter: Approx. 8mm / 0.3in
Color: Orange
Applicable Machine Tools: Woodworking machine tools, engraving machines
Milling Cutter Specifications: 8 x 14mm, 8 x 16mm, 8 x 18mm, 8 x 20mm
Size: Approx. 8 x 14mm / 0.3 x 0.6in, 8 x 16mm / 0.3 x 0.6in, 8 x 18mm / 0.3 x 0.7in, 8 x 20mm / 0.3 x 0.8in
Size: Approx. 44mm / 1.7in
14mm / 0.6in
20mm / 0.8in
16mm / 0.6in
18mm / 0.7in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:4 x Woodworking Router Bits

Features:
One pack includes four colors for different purposes: Purple--Shaping, Blue--Smoothing, Green--Pre-polishing, --Polishing.
The strips can be used for smoothing and polishing the interproximal areas of a variety of dental filling materials.
The sand-free area between the abrasives trips enables easy insertion into interproximal joints of the teeth.
The abrasive strips are made of superior fiber material with flexible and tear-resistant properties.
Great polishing effect, essential and for finishing and gloss contouring of all interdental surfaces.
Specifications:Condition: Brand New
Material: Fiber
Color: Purple, Blue, Green,
Function: Purple--Shaping, Blue--Smoothing, Green--Pre-polishing, --Polishing
Quantity: 60pcs/pack, 15pcs for each color
Single Strip Size: Approx.4*150mm/0.2*5.9in
Package List:1 Pack * Dental Abrasive Strips (60pcs)

Feature:1. High speed steel drill bit, strong wear resistance and strong drilling ability.
2. Reasonable angle, easy to drill holes, more time-saving and more labor-saving.
3. There are specially designed chip removal, chip removal is more convenient.
4. When the product is cut, it will not be easily broken due to overheating.
5. Made of high-quality high-speed steel, high hardness, high strength, not easy to break.
Specification:
Item Type: Twisted Drill Bits
Tool Type: 1/2 straight handle
Cooling type (internal cooling / external cooling) external cooling
Cutting Diameter (mm): Approx. 25mm / 1in
Handle Diameter (mm): Approx. 12.7mm / 0.5in
Length Of Chip Flute (mm): Approx. 2mm / 0.1in
Material: High speed steel 4241
Maximum Cutting Depth: Approx. 50mm / 2in
Blade Diameter: Approx. 25mm / 1in
Blade Length: Approx. 76mm / 3in
Full Length: Approx. 152mm / 6in
Shank Diameter: Approx. 12.7mm / 0.5in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Twisted Drill Bits

Features:
Valve is made of brass for rust protection and long service life.
Ball valve is durable, performing well after many cycles, and reliable, closing securely even after long periods of disuse.
Ball valve's ease of operation, repair, and versatility lend it to extensive industrial use.
Handle lies flat in alignment with the flow when open and perpendicular when for easy visual confirmation of valve's status.
This high quality ball valve would be excellent choices for shutoff and control applications.
Specification:
Material: Brass, PPR
Type: Hot melt fitting
Nominal Diameter: DN25 (1"BSP)
Suitable Fluid: Water
Nominal Pressure: 1.6MPa
Temperature: -20℃~120℃
Weight: 270g / 9.5oz (approx.)
Package list:1 * Ball Valve

Feature:1. Straight hole drilling positioner is made of aluminum alloy 6061, the is anodized, durable and resistant to rust and corrosion.
2. With 6/8/10MM three size, the abrasive steel drill sleeve's hardness is up to HRC40-45 ° with high strength and long service life.
3. It can adjust the position of the two feet according to the thickness of the board.
4. And it is more practical and has a wider range of use. Also, the punching vertical is higher and more precise.
5. Built to strict quality control standards, such a hole punch locator' design is improved for more durability.
Specification:
Item Type: Hole positioner round pin board
Material: Aluminum alloy
Model: Puncher: Approx. 6mm / 0.2in, approx. 8mm / 0.3in, approx. 10mm / 0.4in
Scope of Application: Home, woodworking DIY
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Fixing Frame
3 x Drill Guide

Hole Saw Cutter Diamond Drill Cutter Diamond High Hardness for Concrete Marble
Feature:1. Using high‑quality diamond material, the cutter head is of sharpness and durable
2. The cutting resistance is small, and it has an efficient chip hole elliptical chip hole design, which is more conducive to the discharge of debris.
3. Suitable for drilling various materials, such as marble, concrete, artificial stone, etc.
4. Strict quality control and quality assurance, high safety factor, can be used with peace of mind.
5. With small size, easy to carry and store, convenient to use and with good performance.
Specification:
Item Type: Diamond Hole Saw Drill Bit
Material: Diamond
Process: Sintering
Color: Blue
Opening Hole Diameter: Approx. 20mm / 0.8in
Specification: 3 x Diamond Hole Saw Drill Bit
Applicable Equipment: Electric drill, bench drill
Scope of Application: Core holes for marble, concrete, artificial stone, granite and other materials.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:3 x Diamond Hole Saw Drill Bit

Ignition Coil GX25 High Voltage Ignition Coil Kit Module Replacement With 2Pcs
Feature:1. Convenient easy to install and also generates voltage for the sparks plug.
2. Manufactured according to specific sizes and standards to fit the appropriate size.
3. Made of silicon steel sheet, copper and ABS, which is durable, strong and stable.
4. Excellent workmanship, this kind of ignition coil can perfectly replace the old ignition coil.
5. This ignition coil is small in size, easy to carry and store, easy to use, and good in performance.
Specification:
Condition: 100% Brand New
Item Type: Ignition Coil
Material: Silicon steel sheet Copper ABS
Model: gx25
Fitment: Fit for Honda GX25
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Ignition Coil
2 x Connection Cable

Features:
This DC12V 11RPM N20 right angle metal gearbox Micro gear motor is used for printing pen
This DC motor features large moment of force, low speed, and low noise.
The motor is made of metal gear, wear-resisting, avoid tooth breaking, so with long serving life.
This motor is adopted of pure copper wire coil, with low heat and low loss.
Easy to install and reliable to use
Specifications:
Model: GM12YN20-3DP
Rated power: 2 (W)
Product type: Brush dc motor
Rated voltage:12 (V)
Reduction Ratio: 298:1
Rotation Direction (CCW/CW): CW
No Load Speed: 11RPM (Error: ± 10% )
No Load Speed: ≤ 40mA
Rated Speed: 9RPM (Error: ± 10% )
Rated Current: ≤ 120mA
Rated moment of force: 1.0kgf.cm
Stall moment of force: 2.4kgf.cm
Stall Current: ≤ 420mA
Size: Approx. 3.5cm/1.4in
Weight: Approx.17g/0.6oz
Package list:
1 x gear motor

Description:These cap head hex socket screws are made of 12.9 grade alloy steel with oxidation , which are resistant to rust and corrosion. There are 9 thread lengths for you to choose from, which can be generally used in home and office appliance, machinery, furniture, etc.
Features:1. 12.9 grade alloy steel material with oxidation has good strength of extension and corrosion resistance in many environments.
2. Cap head enables driving where it doesn't have sufficient space for wrenches.
3. for use in confined areas where the head needs to be flush or below the .
4. Used for fasteners in home and office appliance, communication equipment, ship assembly or other machinery industry.
5. Screws and nuts are well packed in 10 compartments and assorted in a transparent plastic box for convenient use and storage.
Specifications:Material: 12.9 Grade Alloy Steel
Color: Black
Screw Thread Lengths: 4mm(20Pcs), 5mm(20Pcs), 6mm(20Pcs), 8mm(20Pcs), 10mm(20Pcs), 12mm(20Pcs), 16mm(20Pcs), 20mm(20Pcs), 25mm(20Pcs)
Thread Diameter: 3mm (M3)
Box Size: 13 * 6.5 * 2.3cm / 5 * 2.6 * 0.9inch
Quantity: 1 x Box of 180Pcs Screws 100Pcs Nuts
Package Weight: 228g
Type: Cap Head Hex Socket Screw
Function: Fastener
Package Includes:180 x Screws
100 x Nuts
Note:934 on the box lable is abbreviated from DIN934, which means cap head hex socket nut.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

100/150/200/300/450mm LML12B Miniature CNC Linear Rail Guide with Slide Block GL
Features:
This linear rail and block are small in size and lightweight, especially suitable for small equipments.
Adopting 4-point contact design, it can bear load from every direction, and has good strength and high accuracy.
Designed with ball retainer, which allows interchangeability in the case of small .
Block has lubrication system; lubrication oil can be easily put into the oil inlet on the side.
Widely used for automatic equipment, measuring equipment, and many other machines that need linear movement.
Specifications:
Model: LML12B
Type: Slide rail
Slide Track: Linear rail
Rail Length: 100mm,150mm,200mm,300mm,450mm (Optional)
Rail Width: 12mm
Material: Bearing steel
Block Fixation Method: Locked
Weight: ~335g(approx.)
Package Includes:
1 x Linear Guide Rail
1 x Linear Guide Block
Note: Please allow small size error due to manual measurement. Thanks for your understanding.

100/150/200/300/450mm LML12B Miniature CNC Linear Rail Guide with Slide Block GL
Features:
This linear rail and block are small in size and lightweight, especially suitable for small equipments.
Adopting 4-point contact design, it can bear load from every direction, and has good strength and high accuracy.
Designed with ball retainer, which allows interchangeability in the case of small .
Block has lubrication system; lubrication oil can be easily put into the oil inlet on the side.
Widely used for automatic equipment, measuring equipment, and many other machines that need linear movement.
Specifications:
Model: LML12B
Type: Slide rail
Slide Track: Linear rail
Rail Length: 100mm,150mm,200mm,300mm,450mm (Optional)
Rail Width: 12mm
Material: Bearing steel
Block Fixation Method: Locked
Weight: ~335g(approx.)
Package Includes:
1 x Linear Guide Rail
1 x Linear Guide Block
Note: Please allow small size error due to manual measurement. Thanks for your understanding.

Descriptions:
This probe is good oscilloscope accessories, compact size, several functions combined in one, this probe is convenient to use.This probe is 100MHz ,with a switch for either 1x or 10x attenuation, stable performance. And providing several accessories designed to make probing and measurements a simple task.
Features:
This probe is 100MHz Oscilloscope probes with a switch for either 1x or 10x attenuation.
Compact size, several functions combined in one, this probe is convenient to use.
Detachable hook tip, the hook is well protected by the plastic case.
Locating sleeves the stability and reliability of the tip exposed to the test point.
Marker rings in different colors help to identify different channels.
Features stainless steel interface, stable performance,with CE certification, IEC1010 standard ,great choice for oscilloscope probe.
Specifications:
Model: P6100
Attenuation ratio: 1X/10X
Input resistance: 1 M Ω / 10MΩ
Input capacitance: 1X:85pF~120pF,10X:18.5pF~22.5pF
Compensation range: 10pF~30pF
System bandwidth: 1X: DC-6Mhz, 10X: DC-100Mhz
Input voltage: 1X: < 300VDC AC Vp-p,10X: < 600VDC AC Vp-p
Operating temperature range: 15 ℃ ~ 75 ℃
Not working temperature range: - 20 ℃ ~ 60 ℃
Process: injection molding integration
Color:grey
Cable length: 120cm/47.2inch
Humidity: less than 85% (relative humidity)
Weight:126g
Package Included:
2 x Oscilloscope Probes
1 x adjust tool
2 x tip locating sleeve
8 x color circle

Features:
Electrical parameter measurement function (voltage, current, active power, energy).
Overload alarm function (over power alarm threshold, backlight and power flashing to alarm).
Power alarm threshold preset function (can set power alarm threshold).
The reset function of energy key.
Store data when power off.
Backlight function, short press the key to turn on or off the backlight, the backlight has memory function, it can store the on or off state when power off.
Display interface is large-screen LCD, it can display voltage, current, power, energy parameters at the same time.
Specifications:
Brand: PEACEFAIR
Model: PZEM-021
Working Voltage: 80~260VAC
Test Voltage: 80~260VAC
Rated Power: 20A/4500W
Operating Frequency: 45-65Hz
Measurement Accuracy: 1.0 grade
Power Test Range: 0~4.5kW (within 1KW, the display format is 0.0~999.9W; 1KW and above, the display format is 1000~4500W.)
Energy Test Range: 0~9999kWh (within 10KWh, the display format is 0~9999Wh; 10kWh and above, the display format is 10~9999kWh.)
Voltage Test Range: 80~260V
Display Format: 80~260V
Current Test Range: 0~20A
Display Format: 0.00~20.00
Weight: 84g(approx.)
Package Includes:
1 x Meter

Boring Tool Bar Lathe Turning Tool Carbide Boring Bar Holders Tungsten Steel
Feature:1. The boring bar made of high hardness tungsten steel, not easy to damage and corrode.
2. High accuracy and clamping stability enable stable work and effectively improve work efficiency.
3. The model is clearly expressed, the first number represents the diameter of the product, and the second number represents the diameter of the clamping tool.
4. This product with an outer diameter of 25mm and an inner diameter of 5mm.
5. This product is widely used in SHB boring bar of CNC machine tools as clamping tools.
Specification:
Item Type: Lathe Turning Tool Boring Bar
Material: Tungsten steel
Purpose: Clamping tools
Outer Diameter: Approx. 25mm / 1in
Inner Diameter: Approx. 5mm / 0.2in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Boring Bar
1 x Hex Wrench
3 x Fastening Screw

Specifications:
Permissible Error: /- 0.003g
Quantity: 1 x 100g,1 x 50g,2 x 20g,1 x 10g, 1 x 5g, 2x2g, 1x 1g, 1x500mg, 2x200mg, 1 x 100mg, 1 x 50mg, 2 x 20mg, 1 x 10mg
Color: Silver
Material: No.45 steel
Total Set of Weights:211.1g
Package included:1 x Plastic Storage Case
1 x Tweezer
1 x 100g Calibration Weight
1 x 50g Calibration Weight
2 x 20g Calibration Weights
1 x 10g Calibration Weight
1 x 5g Calibration Weight
2 x 2g Calibration Weights
1 x 1g Calibration Weight
1 x 500mgCalibration Weight
2 x 200mg Calibration Weights
1 x 100mg Calibration Weight
1 x 50mg Calibration Weight
2 x 20mg Calibration Weights
1 x 10mg Calibration Weight

Feature:
1. Mini portable, can be used as a professional recording pen, MP3, U‑disk.
2. The recording mode is one‑click recording, and the recording format is WAV.
3. There is 3.5 mm(0.13in) for headphones to plug in.
4. Memory type is memory card, easy to use, suitable for students, lawyers, etc.
5. Mini size, easy to carry.
Specification:
Condition: 100% Brand New
Item Type: Voice Recorder
Material: Plastic Metal
Color: As Pictures Shown
Optional: Without Memory Card; With 8G Memory Card
Interface: Standard 2.0 USB
Support MP3,WAV Format Audio Playback
Memory Capacity: Supports 4GB 8GB 16GB 32GB
128k Bit Rate: 70Hr 140Hr 280Hr 560Hr
Recording Format: Mp3 (128kbps)
Frequency: From 20Hz to 20khz
Recording Power: 32mA: 3.5 mm(0.13in)
USB Plug into PC Interface: USB1.1/USB2.0 FULL Speed
Built-in Mic: YES
SNR: 90dB
Built-in Lithium Battery (180MA): 3.6V-4.2V
Memory: Micro Memory Card
Operating Temperature -40°c~60°c
Recording Time: About 5 Hours .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Voice Recorder
1 x Manual
1 x Earphones
or
1 x Voice Recorder
1 x 8G Memory Card (built in the voice recorder pen)
1 x Manual
1 x Earphone
Note:
1. Please allow 1‑3cm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Boring Bar Lathe Turning Tool Carbide Boring Bar Holders Tungsten Steel High
Feature:1. Made of tungsten steel material, not easy to damage, corrosion and high hardness.
2. With high accuracy, high clamping stability and stable working performance.
3. The model is clearly expressed, the first number represents the diameter of the product, and the second number represents the diameter of the clamping tool.
4. Great workmanship, this boring bar can perfect replacement for the old one.
5. This product widely used such as used in SHB boring bar of CNC machine tools.
Specification:
Item Type: Lathe Turning Tool Boring Bar
Material: Tungsten steel
Purpose: Clamping tools
Outer Diameter: Approx. 25mm / 1in
Inner Diameter: Approx. 4mm / 0.2in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Boring Bar
1 x Hex Wrench
3 x Fastening Screw

Features:
Thislinear rail and blockare small in size and lightweight, especially suitable for small equipments.
Adopting 4-point contact design, it can bear load from every direction, and has good strength and high accuracy.
Designed with ball retainer, which allows interchangeability in the case of small precision.
Blockhaslubrication system; lubrication oil can be easily put into the oil inlet on the side.
Widely used for automatic equipment, precision measuring equipment, and many other machines that need precision linear movement.
Specifications:
Model: LML12B
Type: Slide rail
SlideTrack: Linear rail
Rail Length: 100mm,150mm,200mm,300mm,450mm (Optional)
Rail Width: 12mm
Material: Bearing steel
Block FixationMethod: Locked
Weight: 102~335g(approx.)
Package Includes:
1 x Linear Guide Rail
1 x Linear Guide Block
Note: Please allow small size error due to manual measurement. Thanks for your understanding.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Laboratory Instrument Double Regulator Chemical Flask Clamp Test Tube In Retort
Feature:
Made of high quality 304 stainless steel, better corrosion-proof effectiveness, more durable.
Double regulator, convenient to adjust separation distance.
Equip with plastic, hold the flask or test tube more firmly.
This product is used to fix condensate tube or flask on retort stand and marble titration table.
Light and easy to operate.
Specification:Material: 304 Stainless steel and Plastic
Weight: 272g / 9.6oz
Suitable: Chemistry, Biology Teaching
Application: Condenser, Laboratory flask, Test tube.etc
Package list:1 * Clamp
Note:

Features:
Made of high quality material and LED bulb, this beacon light is durable.
Highly bright LED light is quite dazzling, red color light can attract more attention.
Low power consumption and small size, it has stable performance.
This beacon light will not make any annoying noise, no trouble to the ear.
Wide application, normally used as workshop, construction site warning light.
Specifications:
Model: LTE-1101
Material: PC ABS
Color: Red
Working Mode: Rotating
Working Voltage: AC 220V
Power: 3W
Mounting Screw:
Screw Spacing: 102mm
Quantity: 1
Package Includes:
1 x Beacon Light
1set x Fasteners
Note:1. Please allow small size error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Features:
1. Effectively prevent impurities and particles in the water from entering the water dispenser, make sure pig can get and fresh water, this can avoid some diseases.
2. Strong spring, simple structure, easy to use and maintain. Excellent sealing performance, suitable for all animal drink requirements, such as pigs, cattle and so on.
3. The cleaners work reliably, drink water while drinking, thereby reducing the waste of water, preventing leakage, preventing bacterial wilt and keeping healthy for piggery.
4. When the pig's mouth touches the metal bar, the water will flow out automatically and automatically close when it leaves. It can not only save water effectively but also reduce the amount of labor in the water supply.
5. It is good to ensure the cleaning of the pig's water terminal and reduce the various diseases caused by water quality.
Specification:Item Type: Pig Nipple Drinker
Material: Stainless Steel, Copper
Item Color: As Pictures Shown
Item Size: Approx. 63 x 20 mm / 2.5 x 0.8 inch
Package Weight: Approx. 303 g
Package Include:
5 * Pig Nipple Drinkers

Feature:1. The motor works with low noise, low current and no sparks
2. Reduce the motor while increasing the output torsion, reducing the load inertia
3. Widely used in robots, small appliances, fans and electric curtains, etc.
4. Made of high quality material, durable and long service life
5. Great workmanship, perfect replacement for the old one
Specification:
Item Type: DC Motor
Model: JGA25-310
Rated Voltage: 6V, 12V(optional)
Direction of Rotation: CW when viewed from the output shaft side
Efficiency: IE 1
Shaft Diameter: Approx. 4mm / 0.2in
Protection Function: Explosion-proof
Type: Gear Motor
Construction: Permanent magnet
Certification: CCC
Commutation: Brush
Measurement Conditions:
Motor Position: Placed horizontally during measurement
Power Supply: DC power supply
Working Temperature and Humidity: Temperature range: -10℃ 50℃, humidity range: 30% -80% .
Storage Temperature: Temperature range: -20℃ 60℃
Optional Style:
VoltageNo LoadLoad TorsionStallRatio
The RatedCurrentCurrent TorsionOutputTorsion Current
RPMRPMkg.cmWkg.cmA1:00
6V79525556800.040.20.160.254.4
6V48425338800.080.20.320.259.28
6V21125147800.190.20.760.2521.3
6V2571800.30.21.20.2534
6V772553800.40.21.60.2545
6V442530800.70.22.80.2578
6V342523800.90.23.60.25103
6V202514701.50.260.25171
6V1525107020.280.25226
6V92567030.2120.25378
6V7255704.50.2180.25500
12V18189012723000.0960.50.380.854.4
12V862906033000.20.50.80.859.28
12V375902623000.460.51.80.8521.3
12V235901642800.740.52.90.8534
12V1779012328010.540.8545
12V85712601.70.56.80.8578
12V7785532602.20.58.80.85103
12V4680322503.70.5140.85171
12V35802424050.5200.85226
12V21801424080.5320.85378
12V168011240110.5440.85500
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Motor

Description:
Wire cutter is used to strip the insulated layer of electric wire heads. It can strip wires conveniently, which is an ideal stripping tool for electric workers.
Features:
1. 100% brand new and high quality.
2. Made of high quality metallic material, strong and durable.
3. Blades are sharp enough to quickly strip the cable jacket and the cut is neat.
4. Easy to adjust the depth of the blade.
5. Suitable for optical cable with stripping range of 4-28mm and copper or aluminum tube..
Specifications:
Material: metal plastic
Color: silver black
Overall length: 12.6cm/4.96in
Weight: Approx. 270g
Package Includes:
1 x Wire Cutter
1 x Spare Blade
Note:
1. Due to the difference between the monitors and light effect, the picture may not reflect the actual color of the item.
2. Please allow small deviation due to manual measurement. Thanks for your understanding.

Feature:1. The motor works with low noise, low current and no sparks
2. Reduce the motor while increasing the output torsion, reducing the load inertia
3. Widely used in robots, small appliances, fans and electric curtains, etc.
4. Made of high quality material, durable and long service life
5. Great workmanship, perfect replacement for the old one
Specification:
Item Type: DC Motor
Model: JGA25-310
Rated Voltage: 6V, 12V(optional)
Direction of Rotation: CW when viewed from the output shaft side
Efficiency: IE 1
Shaft Diameter: Approx. 4mm / 0.2in
Protection Function: Explosion-proof
Type: Gear Motor
Construction: Permanent magnet
Certification: CCC
Commutation: Brush
Measurement Conditions:
Motor Position: Placed horizontally during measurement
Power Supply: DC power supply
Working Temperature and Humidity: Temperature range: -10℃ 50℃, humidity range: 30% -80% .
Storage Temperature: Temperature range: -20℃ 60℃
Optional Style:
VoltageNo LoadLoad TorsionStallRatio
The RatedCurrentCurrent TorsionOutputTorsion Current
RPMRPMkg.cmWkg.cmA1:00
6V79525556800.040.20.160.254.4
6V48425338800.080.20.320.259.28
6V21125147800.190.20.760.2521.3
6V2571800.30.21.20.2534
6V772553800.40.21.60.2545
6V442530800.70.22.80.2578
6V342523800.90.23.60.25103
6V202514701.50.260.25171
6V1525107020.280.25226
6V92567030.2120.25378
6V7255704.50.2180.25500
12V18189012723000.0960.50.380.854.4
12V862906033000.20.50.80.859.28
12V375902623000.460.51.80.8521.3
12V235901642800.740.52.90.8534
12V1779012328010.540.8545
12V85712601.70.56.80.8578
12V7785532602.20.58.80.85103
12V4680322503.70.5140.85171
12V35802424050.5200.85226
12V21801424080.5320.85378
12V168011240110.5440.85500
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Motor

Features:
100% brand new and high quality.
Moving 0.25mm for one step, can use microstep driver if need smaller.
The maximum linear speed is 25mm per second.
Widely used for small devices such as equipment, engraving machine, etc.
The motor need a A4988 driver(not included) to drive, can not directly connect to power.
Specifications:
Model D8-MOTOR80
Drive voltage 12V DC (drive: 16219)
Current per phase 800 /phase
Coil resistance 15 10% Ω/phase
No.of phases 2 phases
Step angle 18 ./step
Excitation method 1-2 phase excitation
Drive mode Bipolar drive
Pull-out thrust 500g above at 125pps
Max response frequency 1600 pps above
Max starting frequency 1100 pps above
Insulation class Class E
Insulation strength 100vac one second
Insulation resistance 50M DC 500V
Operating temperature 0~ 55℃
Motor temperature 80℃
Thread Rod Diameter 3mm
Thread Rod Length 90mm
Slide Block Stroke 80mm
Thread Rod Pitch ±0.5mm
Length 10.3cm/4.1in
Weight 50g (approx.)
Package Includes:
1 x Motor with Linear Slide

Features:
Made of high quality nylon material, insulated, thermal insulation and corrosion resistant.
Waterproof standoffs are rust resistant and easy to .
for mounting between circuit boards and machine boards.
They do not slide when properly used.
All parts are packed in a plastic box for easy carrying.
Specification:
Material: Nylon
Color:
Size: M2/M2.5/M3
Package list:
20 x M2 Nuts
20 x M2.5 Nuts
20 x M3 Nuts
20 x M2*6mm Screws
20 x M2*15mm Screws
20 x M2.5*6mm Screws
20 x M2.5*15mm Screws
20 x M3*6mm Screws
20 x M3*15mm Screws
10 x M2 6 6mm Male-Female Standoff
10 x M2 8 6mm Male-Female Standoff
10 x M2 10 6mm Male-Female Standoff
10 x M2 12 6mm Male-Female Standoff
10 x M2 15 6mm Male-Female Standoff
10 x M2 20 6mm Male-Female Standoff
10 x M2.5 6 6mm Male-Female Standoff
10 x M2.5 8 6mm Male-Female Standoff
10 x M2.5 10 6mm Male-Female Standoff
10 x M2.5 12 6mm Male-Female Standoff
10 x M2.5 15 6mm Male-Female Standoff
10 x M2.5 20 6mm Male-Female Standoff
10 x M3 6 6mm Male-Female Standoff
10 x M3 8 6mm Male-Female Standoff
10 x M3 10 6mm Male-Female Standoff
10 x M3 12 6mm Male-Female Standoff
10 x M3 15 6mm Male-Female Standoff
10 x M3 20 6mm Male-Female Standoff
1 x Plastic Box
1 x Screwdriver

Features:
Made of high quality 304 Stainless Steel material, high strength and corrosion resistance, durable in use.
thread design offers strong engagement for maximum fastening.
Smooth appearance, clear thread, uniform without burr.
Various specifications in one set to meet your various needs.
Comes with a durable plastic storage case for convenient storage and easy carrying.
Specification:
Condition: 100% Brand New
Item Type: M2.5 Screw Set
Quantity: 662pcs
Material: 304 Stainless Steel
Package List:
160 x M2.5 Flat Washer
160 x M2.5 Elastic Washer
160 x M2.5 Nut
2 x M2.5 Mounting Wrench
20 x M2.5*5 Screw
20 x M2.5*6 Screw
20 x M2.5*8 Screw
20 x M2.5*10 Screw
20 x M2.5*12 Screw
20 x M2.5*14 Screw
20 x M2.5*16 Screw
20 x M2.5*18 Screw
20 x M2.5*20 Screw

Features:
These bits are made of Steel material, large moment of force and high toughness.
The is processed by special blue treatment, not easy to rust.
The magnetic head of the bit is convenient to use and not slip.
With 6.3mm(1/4inch) hex shank, they are widely used on air screwdrivers, electric drills, etc.
The type of the bit is printed on the , easy to choose the one you need.
Specification:Material: steel
Hex Shank: 6.3mm(1/4in)
Length: 150mm
Diameter: 3.0mm
Type: PH1
Weight: 146g(approx.)
Package Includes:10 x Screwdriver Bits

Features:
1. Made from high quality material, these nuts have high hardness and a long service life
2. There are total 200pcs nuts that you can use for many projects
3. They are suitable for 20/30/40 aluminum profiles.
4. Can be used for building industrial aluminum frame structures, etc.
5. Comes with a plastic storage box for easy use and convenient carriage.
Specification:
Condition: 100% Brand New
Item Type: T Slot Sliding Nut
Model & Quantity: 200PCS in total
for 20 Aluminum Profiles
M3 20PCS
M4 20PCS
20PCS
for 30 Aluminum Profiles
M4 20PCS
20PCS
M6 20PCS
for 40 Aluminum Profiles
M4 20PCS
20PCS
M6 20PCS
M8 20PCS
Package List:
200 x T Slot Sliding Nut

Shaft Coupler Stable Aluminum Alloy Shaft Coupling for Water Pumps Compressors
Features:
1. 100% brand new and high quality.
2. Excellent load capacity, long service life, it is safe and reliable.
3. Simple structure and it is convenient to maintain and inspect.
4. Stable work with good vibration damping, cushioning and electrical insulation.
5. Widely used for shafting transmission of various mechanical devices, such as water pumps, fans, compressors and hydraulic machinery, etc.
Specification:
Condition: 100% Brand New
Model: D40 L50
Material: Aluminum Alloy
Weight: Approx. 128g / 4.5oz
Outer Diameter: Approx. 40mm / 1.6in
Length: Approx. 55mm / 2.2in
Inner Hole Diameter: Approx. 14 * 14mm / 0.6 * 0.6in
Package List:
1 * Coupling Coupler

M35 Straight Handle Drill Bits Set Drill Bit general construction for home DIY
Feature:1. Diverse specifications, suitable for a variety of processing occasion
2. Well packed for easy transportation and storage
3. Made of high quality high speed steel material, durable and long service life
4. The drill bit is roasted yellow, which has higher wear resistance and can reduce the friction coefficient
5. Including 13pcs drill bits, easy to install and replace
Specification:
Item Type: Twisted Drill Bit
Material: High Speed Steel
Cutting Diameter: 1.0-6.5mm
Chip Flute Length: 8mm
Maximum Cutting Depth: 10mm
Vertex Angle of Outer Blade: 135°
Blade Length: 2mm
Blade Diameter: 5mm
Drill Bit Specifications: 1.5mm / 2mm / 2.5mm / 3mm / 3.2mm / 3.5mm / 4mm / 4.5mm / 4.8mm / 5mm / 5.5mm / 6mm / 6.5mm
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:13 x Twisted Drill Bit
Note:The twisted drill bits have high hardness and brittleness. When swinging too much, there is a danger of breakage. Please pay attention to the use of safety. For drilling thick stainless steel products such as stainless steel, you can add water or cooling fluid while drilling to reduce the temperature during the drilling process. Damage to the drill bit due to high temperature

Features:
These electrodes are suitable for MAX1650 cutting torch
Adoption of tellurium copper material is both good free cutting performance and excellent electrical and thermal conductivity, as well as corrosion and electrical ablation resistance
Mainly used in the field of metal cutting, such as carbon steel, stainless steel, aluminum and copper
Electrodes are regarded as cutter consumables, they are essential to cutting project.
5 pcs electrodes are available, convenient to replace the broken one during the cutting process, complete the cutting project smoothly.
Specification:
Model: 220037
Material: tellurium copper
Type: consumables
Working pressure : 0.2-0.8Mpa
Working current: 100A
Suitable model: for MAX1650
Size: 42*12mm/1.7*0.5in
Weight: Approx. 103g/3.6oz
Package list:
5 x Electrodes with box

Features:
Made of high quality steel, wear resistance, long service life.
High thread, greatly improve your operating efficiency.
Excellent clamping force, accurate and reliable, easy to clamp.
Electroplate paint shell, can effectively prevent rusting in harsh environment.
Suitable for impact drill and AC & DC drill with different power.
Specification:Material: Steel
Weight: 369g/13oz
Package List:1* 1.5-13mm Drill Chuck

Feature:1. Alloy material blade, overall coating , sharper to use.
2. Easy to install, fast and convenient to operate.
3. Made of high quality alloy material, it is durable and not easy to wear.
4. Perfect for trimming cattle or sheep hoof/horn.
5. Suitable for 7 sharper blades.
Specification:
Condition: 100% Brand New
Item Type: Hoof Trimming Blade
Material: Metal
Color: As Pictures Shown
Product Size: Approx. 1.6x1x0.5cm/0.6x0.4x0.2in
Weight: Approx.11g
Package List:1x Blade

MVI205 Mechanical Shaft Mechanical for Pumps Electrical Appliances
Feature:1. Adopts high quality material, resistance to corrosion, rust resistant and wear resistant, durable to last years of usage.
2. Suitable for cleaning pumps, on line pumps and universal industrial pumps.
3. Features in single coil and inbuilt spring, this mechanical is safety, ease in installation and strong generality.
4. Replacement pump for pump, easy and convenient installation.
5. It belongs to the single end face structure with built-in and internal flow, its transmission form is the rubber bellows and the shaft through the fastening force of the fastening to drive the moving coaxial rotation.
Specification:
Condition: 100% Brand New
Item Type: Mechanical
Spring Material: 304 Stainless Steel
Rubber Material: Butyronitrile
Color: As shown in the picture
Inner Diameter: Approx.20.5mm/0.8in
Function: Shaft
Application: For Pump
Operating Pressure: 1 (MPa)
Speed: ±10m/ s
Operating Temperature: -30-120℃
Type: Rotating
Weight: Approx.38g/1.3oz
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Mechanical
1 x Base
Note:
1. Please allow 1-2mm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Feature:1. Made of high-quality materials, durable and practical to use, long service life.
2. With screw holes that can be used to fix the resistor on the chassis or heat sink for greater heat dissipation.
3. Widely used in power supply, sensor, elevator, stage audio and high demand equipment industry.
4. Precise manufacturing technology, high reliability and high performance.
5. Built to meet standard specification, strictly follow factory quality control.
Specification:
Condition: 100% Brand New
Item Type: Resistor
Color: As picture shown
External Material: Aluminum
Resistance Value: 2Ohm 2R
Rated Power: 200W
Endurance: ± 5% (J)
Mounting Hole Diameter: Approx. 4.2mm/0.2in
Hole to Hole Distance: Approx. 41.5mm(1.6in) / 37.5mm(1.5in)
Board Size (Length x Width x Height): Approx. 100 x 52 x 29mm/3.9 x 2 x 1.1in
Body Size (L x D): Approx. 100x32mm/3.9 x 1.3in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x 200W 2R Resistor

Set Screw Wrench No Burrs Set Screw Set for Instruments Accurate Instruments
Feature:1. Widely used in various accurate instruments, meters and electronic products.
2. Professional and practical design, compact appearance, easy to carry and use
3. Using high‑quality materials, strong and durable, has a long service life
4. Smoothly appearance, clear thread, even without burrs, please enter
5. Great workmanship, perfect replacement for the old one
Specification:
Item Type: Stainless Steel End Hex Adapter.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Material: 304 stainless steel.
Uses: Mainly used for the fastening connection of aluminum profiles, such as the fastening connection between multi-slot aluminum profiles.
Products Include:
20 x M8 x 8
20 x M6 x 10
20 x M6 x 6
20 x x 8
20 x x 5
20 x M4 x 6
20 x M4 x 4
40 x M3 x 6
40 x M3 x 4
40 x M3 x 3
20 x M2.5 x 3
20 x M2.5 x 4
20 x M2.5 x 5
20 x M2.5 x 6
6 x Wrench
Package List:
20 x M8 x 8
20 x M6 x 10
20 x M6 x 6
20 x x 8
20 x x 5
20 x M4 x 6
20 x M4 x 4
40 x M3 x 6
40 x M3 x 4
40 x M3 x 3
20 x M2.5 x 3
20 x M2.5 x 4
20 x M2.5 x 5
20 x M2.5 x 6
6 x Wrench

Features: These bearings are made of high quality steel for low noise and long service life.
They are double rubber sealed to avoid contaminants entering and save lubricant.
Bearings have a 10mm inner diameter, a 30mm outer diameter, and a 9mm thickness.
These are great for 10mm shaft/rod projects such as mechanical equipment,electrical instruments, toys.
There comes total 10 pieces miniature bearings which you may use for many different projects.
Specifications:
Type: 6200-2RS
Material: Steel
: Double rubber
Inner Diameter: 10mm/0.4in
Outer Diameter: 30mm/1.2in
Thickness: 9mm/0.4in
Quantity: 10pcs
Weight: 315g(approx.)
Package Includes:
10 x Bearings
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:
Adopt of imported high precision CNC equipment for processing
Use slide valve to good air tightness and enhance service life
The surface of the valve body has been sanded or brushed, and the appearance is beautiful and delicate
High quality solenoid valve coils provide reliable power for slide rod sliding
The solenoid valve structure is simple, compact, large ventilation,easy to install and maintain
The air inlet is equipped with metal filters
Specifications:
Model: 2P025-08
Material: plastic
Working medium: air, water, oil
Action: direct -acting
Voltage: DC24V
Circulation hole diameter: 2.5mm
CV value: 0.23
Connector: PT1/4
Applicable fluid viscosity: < 20cst
Working Pressure Range: 0-7Mpa
Maximum compression resistance: 1.05Mpa
Size: 6.5 x 4 cm / 2.56 x 1.57in
Weight: 114g
Package included:
1 x Electric Solenoid Valve

Features:
It is made of 304 stainless steel, corrosion resistant.
Heavy wall, leakproof, anti-explosion, security increased.
It is anti-explosion, so compared with glass alcohol lamp, it is safer.
Easy to use, long service life.
Come with a cap and a wick, convenient to use and store.
Specifications:Material: Stainless steel Copper
Color: Silver
Capacity: 200ml
Screw: Fine copper screw
Diameter: Approx. 7.5cm / 2.95inch
Height: Approx. 11cm / 4.33inch
Weight: Approx. 224g
Package Included:1 x Alcohol Lamp

Boring Tool Set Lathe Turning Tool Boring Bar Small Bore Inner Hole Tungsten
Feature:1. Using high‑quality tungsten steel materials, high hardness and not easy to damage.
2. The boring bar has high accuracy and clamping stability, which enables stable work and effectively improves work efficiency.
3. The model is clearly expressed, the first number represents the diameter of the product, and the second number represents the diameter of the clamping tool.
4. This product is a clamping tool with an outer diameter of 25mm and an inner diameter of 6mm.
5. With great workmanship, this product can perfect replacement for the old one.
Specification:
Item Type: Lathe Turning Tool Boring Bar
Material: Tungsten steel
Purpose: Clamping tools
Outer Diameter: Approx. 25mm / 1in
Inner Diameter: Approx. 6mm / 0.2in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Boring Bar
1 x Hex
3 x Fastening Screw

Feature:1. Adopts high quality plastic and iron material, it is durable for long time use.
2. The water inlet normally close solenoid valve is compact is size and easy to use.
3. Easy installation and replacement, can directly replace the broken or old one.
4. Stable performance and high reliability, it is not easily damaged and has long service life.
5. A practical water inlet solenoid valve, suitable for water dispenser, it works well during use.
Specification:
Condition: 100% Brand New
Item Type: Solenoid Valve
Material: Plastic Iron
Connection Form: Thread
Thread: /4in
Type (Channel Position): Two-Way
Voltage: Normally Close DC12V, Normally Close DC24V, Normally Close AC220V (optional)
Product Size: Approx. 7 x 6 x 4.5 cm / 2.8 x 2.4 x 1.8 in
Weight: Approx. 117g / 4.1oz
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Solenoid Valve

Features:
1. Made of high quality material, durable and long service life.
2. Low heat and this light emitting diode is energy-saving
3. Small body and it can provide stable performance.
4. All 1000pcs are divided in a storage case with different compartment, it will not mix them up
5. Suitable for DIY LED projects, school science experiments, car decorations, signal indicator, electronic and electrical experiments,etc.
Specification:
Condition: 100% Brand New
Model: Red, Yellow, Blue, Green, White
Thermal Resistance: ≤5(°/W)
Color Rendering Index: 60-70
Angle Of Illumination: 8 (°)
Luminous Efficiency: 90 (lm/W)
Substrate Material: Copper
Package List:
1000Pcs 3mm Light Emitting Diode(200pcs in each color, including red, yellow,blue,green,white)

Feature:1. High durability depends on that thermal paper is made of excellent material in high quality.
2. Supports good effect, printer paper can be easy and fast to use for making itself getting great popularity.
3. With guaranteed quality, such printer paper quality can be used with confidence, practical.
4. Applied to pocket printers, according to the size can be applied to printers of different specifications for a wide range of use.
5. No extral step is required when you use such paper and the operation is simple.
Specification:
Item Type: Printer paper
Material: Paper
Total Length: Approx. 6meter / 19.7ft
Width: Approx. 5.5cm / 2.2in
Function:Print camera paper, wrong question photo printing paper
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:10 Roll x Printer Paper

Features:
Large screen LCD displays voltage, current, active power, energy at the same time.
The DC voltmeter is designed with power alarm threshold, overload alarm function.
It has memory function can store measure data when power off.
Short press the key to turn on or off the backlight.
Built in current shunt , convenient for using and saving your time.
Specifications:
Brand: PEACEFAIR
Model: PZEM-031
Working voltage: 6.5-100V DC
Voltage test range: 6.5-100V DC
Rated power: 20A / 2000W
Measurement Accuracy: 1.0
Weight: Approx. 78g
Test Range Display Format
Power 0-2kW ＜1kW, 0.0-999.9W
≥1kW, 1000-2000W
Energy 0-9999kWh ＜10kWh, 0-9999Wh
≥10kWh, 10-9999kWh
Voltage 6.5-100V 6.50-99.99V
Current 0-20A 0.00-20.00A
Note:This module is only suitable for 6.5~100V DC power.
This module is suitable for indoor, not outdoor.
Applied load cannot exceed the rated voltage and current.
The wiring order cannot be wrong.
Built in current shunt , don't need to connect outside.
Packing Included:1 x Voltage Current Meter