Kategóriák

Features:
Valve bodies are made of brass for rust protection and long service life.
Ball valves are durable, performing well after many cycles, and reliable, closing securely even after long periods of disuse.
This high quality ball valves would be excellent choices for shutoff and control applications.
It has minimal flow resistance, and the closing piece can withstand the high pressure difference during closing.
The valve can realize fast opening and closing, compact structure, small size and light weight.
Specification:
Material: Brass
Nominal Diameter: DN50 (2"BSP)
Pressure: 1.6MPa
Liquid: Water, oil, gas
Quantity: 1
Weight: 1010g / 35.6oz (approx.)
Package list:
1 * Ball Valve
Note: Ball valve is the control part of the pipeline system that can quickly cut off and turn on fluid. Choosing the corresponding ball valve and it shall be regulated, installed and maintained correctly. It is widely used in water supply, gas, HVAC, oil pipe and other systems.

Features:
It is adopted of high quality high speed steel for durable and long serving life.
Has good milling and cutting performance, ensure the high efficiency of the work.
Sufficient bending strength and wear resistance, slot milling, hole and the edge of the board, the surface is clean, neat, no glitches.
High strength, resistance to bending, breakage resistance, and have excellent physical properties, long tool life.
Suitable for the needs of all aspects of the milling.
Specifications:
Material: high speed steel
Applicable: for milling machine
Size: M6, M8, M10, M12, M14, M18, M20
Weight: 651g
Package included:
7 x Milling Cutter

Features:
Easy to install - Integrates the powerful features of the Mega2560 Ramps1.4 kit, greatly reducing wiring problems, making connections more convenient and more stable.
Easy to use - Motherboard supports LCD2004 and LCD12864, no need to use adapter, motherboard power supply.
Good compatibility - The firmware can use the same configuration as ramps1.4. The marlin firmware running in the Mega2560 ramps 1.4 kit can run directly on the mainboard.
Wide voltage input range, short circuit protection - Useing DC-DC step-down design and regenerative fuse for short circuit protection, which improves the MEGA2560 board's severe heating problem and allows any power supply of 10V-30V.
Supports up to 5 motor drives - Supports A4988 / DRV8825 / TMC2100 drives, motor drive circuits are not integrated on the board. You can replace any stepper motor drive you need to make it easier to operate.
Rich expansion port - Motherboard reserves SERVO, UART, IIC extension, so you can use it to achieve automatic leveling, control touch screen intelligent controller, control wireless module and interrupt detection.
Wide applicability - widely used in 3D printers, such as for Kossel/Prusa i3/corexy, etc.
Specification:Main control chip: ATMEGA256016AU
Input power: 10V~30V
Standby current: 35mA ± 5mA
Stepper motor driver: 5 channels maximum
Hot bed output control: 1 channel
Heating output control: 2 channels
Undercurrent output control: 3 channels
This is an integrated motherboard that integrates the power of the Mega2560 Ramps1.4 with more advanced features; the streamlined interface effectively avoids the unnecessary hassle and power consumption of the Ramps 1.4 Mega2560. It is a feature-rich, all-in-one electronic solution for Mendel/Prusa and other CNC equipment.
Package list:1 * Mainboard
1 * USB Cable

Features:
High quality metal shell, good damping, high hardness and strong heat resistance.
Designed to reduce vibration and noise in automated mechanical operations.
It has a soft shock absorbing effect, enhance working efficiency.
Greatly reduce the shock and improve the stability.
Can improve the efficiency of machinery to increase production capacity, and more safe mechanical operation to avoid accidents.
Specification:
Item Name: Oil Pressure
Model: AD2580
Maximum stroke: 80mm
Operating temperature: 0℃ ~ 60℃
Maximum load: 15-350kg/f
Package List
1* Oil Pressure
1* Wrench

Feature:1. Accuracy terminal crimping module, adjustable compression range for multiple compression ranges
2. The tool is made of high-hardness and accuracy material, which is light and easy to carry, durable and long service life
3. The handle is made of special soft rubber material, ergonomic design, non-slip, comfortable to use
4. The handle had ratchet structure design which can save time and effort, convenient to store
5. Suitable for crimping F/BNC/RCA connectors
Specification:
Item Type: Crimping Pliers
Material: A3 Steel
Handle Material: PVC
Scope of Application: F/BNC/RCA
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Crimping Pliers
1 x User Manual
Note:New‑style and old‑style are shipped randomly

Wireless BT5.0 Voice Translation Earphone Real Time Translator Headset Headphone
PKO-BTM223 Earphone
Existing for IOS/Android Language Pack:
Netherlands, France, Italy, Korea, Romania, English (Canada), Denmark, Portuguese (Brazil),Chinese (China), Chinese (Hong Kong), Sweden, Spain, Hungary, Arabic (Saudi Arabia),English (UK), Hebrew (Israel), English (Australia), Spanish (US), Japan, Finland, Poland, Greece, Czech republic, Russia, Germany, Thailand, Portugal, Hindi, Indonesia, English (US), Slovakia, Turkey.
Features:
1. Support more than 33 languages translation. Speak to the earphone, it will translate into the voice of the country you want.
2. For PeikoS smart earphone, standby time up to 120 hours, continuous music listening time for more than 3 hours.
3. Super light and small headset with 4.2g weight and 13mm thickness.
4. Ergonomic design, suitable for human ear structure, more comfortable to wear, long time without pain.
5. The oblique in-ear mode accurately fits the angle of human ear, and more comfortable to wear.
6. Built-in high-sensitive signal analog microphone, so as to realize accurate listening and identification.
7. The external charging box can charge the earphone for 3.5 times. Automatically connect when pick up the earphone, no secondary connection is required.
Specifications:
Item Type: Headset
Product Name: For Peiko S Earphone
Model: PKO-BTM223
Headset Size: Approx. 16x24x16mm/0.6x0.9x0.6in
Headset Weight: Approx. 4.2g
Continuous Listening Time: About 4 hours
Communication Distance: 10m
Charge Time: 2h
Standby Time: 120h
Headset Battery Capacity: 50mAh
Charging Box Weight: Approx. 12g
Charging Box Size: Approx. 38x21x54mm/1.5x0.8x2.1in
Charge Time: 2h
Battery Capacity of Charging Cabin: 300mAh
Package List:
1 x Translation Headset
1 x Charging Box
1 x Data Line
2 x User Manual
2 x Ear Caps
Note:
Not just Chinese to other languages, other languages can also be translated to each other, for example, French to German, Thai to Japanese, universal!!
Language packs are constantly being updated.

Feature:1. Including 35pcs grinding head, durable and can meet your different needs.
2. Anti-rust,, with different kinds of grinding head, wide range of use.
3. Come with a storage box, convenient to carry and easy to storage.
4. Stainless steel base, plastic frame, 360 degrees rotational design.
5. Wonderful and practical jewelry making, polishing and processing tool.
Specification:
Condition: 100% Brand New
Item Type: Grinding Head
Height: Approx. 8.7cm / 3.4in

Package List:1 x Grinding Head Storage Box
35 x Grinding Head

Feature:1. Dismountable hook as well as dedicated weighing loadcell lead to long time stability.
2. Easy to carry, accurate measurement, suitable for industrial weighing or daily load bearing.
3. Accurate weighing capacity is provided by high quality workmanship. This weighing scale has a rating of 660lbs (300kg), the resolution ratio is 0.2lbs (0.1kg).
4. Auto‑sleep: Stable and no action in 3 sec. Automatic power off is for lower power consumption when not needed.
5. Adopts high quality stainless steel material, rust‑resistant, and has a waterproof screen and buttons, sturdy yet lightweight case, durable in use
Specification:
Condition: 100% Brand New
Item Type: Crane Scale
Material: Stainless Steel
Color: As shown in the picture
Overall Size: Approx.29x8.5cm/11.4x3.4in
Capacity: 300 kg(600 Ib)
Weighting scales: Kilograms (kg), Pounds (lb), N
Resolution: 0.1 kg(0.2 lb)
Tare Range: 100% F.S.
Auto : ±50% F.S.
Manual : ±2% F.S.
-Tracking: 0.5e/s
Overload: 100% F.S. 9e
Maximum Safety Load: 120% F.S.
Ultimate Load: 300% F.S.
Battery Life: >150hours
Power: 3 x AA battery (Not Included)
Reading Stable Time: ≤10seconds
Auto-sleep: Stable and no action in 3 sec.
Weight: Approx.750g/26.5oz
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Crane Scale(Battery Not Included)
1 x Stainless Steel Ring
1 x Screw for Stainless Steel Rings
2 x Screw Rings
1 x Steel Needle
1 x Stainless Steel Hook
1 x Instruction Manual
Note:
1. Please allow 1‑2cm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Feature:1. This product is a small brush motor, made of premium aluminum material.
2. With metal belt pulley, strong, durable for long time use.
3. The motor length of 100mm is 68mm in diameter, the shaft length is 28mm, the shaft diameter is 8mm, the distance between the 2 fixed holes of the motor is 36mm, and the sprocket wheel is the 9 teeth sprocket wheel of the 25H model.
4. The shaft diameter: 8mm (single milling slot 1mm).
5. Suitable for electric scooter, electric bicycle, etc.
Specification:
Condition: 100% Brand New
Item Type: Brushed Motor
Model: MY6812
Material: aluminum
Color: as picture shown
Rated power: 120W (kW)
Rated voltage: 12 (V)
Main application: scooter, electric vehicle
Rated voltage range of 3C: below 36V DC
Rated current: <8, 5A
Rated speed (RPM) : 2500±5%
Maximum speed (RPM) : 3500±5%
No-load current: < 0.9A
Rated torque: 0.56 nm
Transmission: belt pulley, metal
Shaft diameter: 8mm (single milling slot 1mm)
Efficiency: > 68%
Motor length: 100mm/3.9inch
Motor diameter: 68mm/2.7inch
Shaft diameter: 8mm/0.3inch
Motor fixed holes distance: 36mm/1.4inch
Sprocket: 25H 9 teeth sprocket
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Brushed Motor

Feature:1. Made of aluminum alloy material, engine hood cover buckle polishing treatment, corrosion resistant and not easy to fade.
2. The locking pins fasten the vehicle hood and keeps it from vibrating while driving or cornering.
3. Easy installation, directly replace the original latches without drilling required.
4. Quick and flexible to lock and unlock, reinforced body mounts for extra strength and durability.
5. A great decoration to enhance your custom car look, increase your car's line sense. Universal fit for most of car.
6. Custom designed to fit for Wrangler JK 2007-2017
Specification:
Condition: 100% Brand New
Item Type: Lock Catch Buckle
Material: Aluminum Alloy
Color: Black
Lock Size: Approx.133mm/5.2in
Buckle Size: Approx.49mm/1.9in
Gasket Size: Approx.35mm/1.4in
Weight: Approx.930g/32.8oz
Fitment: Fit for Wrangler JK 2007-2017
Installation Steps:1. Remove the cover and front face, remove the cover nut with hex wrench from the side gaps.
2. Align the corresponding gasket with the buckle hole of the new machine cover and tighten it.
3. Screw and should be aligned with the original car's hole position and pressed tightly
4. Unscrew the screw of the new machine cover button, remove the head of the machine cover button and leave the base
5. Tighten the base screw to fix the "base" of the cover.
6. Then reinstall the head of the cover button
7. The machine cover buckle base to place the corresponding gasket two
8. Align with the position above the original machine cover, fix and install with nut on the back side
9. Put down and close the cover and press firmly with both hands when the cover is locked. "Ka" means the cover is locked.
10. Installation completed. (hint: if the cover button cannot be locked, the position of the cover above should be adjusted)
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:
2 x Set Engine Cover Lock
2 x Pack Fitting
3 x Hex Wrench
Note:
Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

WiFi Smart Water Gas Handle Valve Controller Supports
for Alexa Google Home/Tuya
Feature:1. It is a novel design product with short range, low cost, low power consumption and high reliability.
2. Smart WiFi valves are compatible with for Amazon Alexa and for Google Home assistant, and it can allow you to turn off/on the water valve by voice.
3. It is fully compatible with wireless networks, you can remotely control the valve via your smartphone.
4. It can support timing and detect the leakage condition, which can your life.
5. No pipe is required, and it is easy to install, convenient to use and operate.
6. The mobile app synchronizes the control water valve on or off. The WiFi smart water valve with local distribution function. If you perform an on/off valve during connection to WiFi, the valve can perform scheduled synchronization tasks without WiFi connection.
7. In order to avoid a power failure, it cann't ba used. There is a manual clutch at the bottom of the device, which allows you to move the lever to close or open the valve.
8. Compatible with water pipe ball valve, electrical switch, manual control, natural gas / liquid / faucet. It is suitable for controlling water valve, gas valve, filling tank, farm irrigation equipment.
Specification:
Condition: 100% Brand New
Item Type: Water Valve Controller
Color: Black
Wireless Protocol: WiFi 2.4GHz
Wireless Range: Maximum 30m/98.4ft (Outdoor)
Valve Pressure:1.6MPA
Valve Specifications: Approx. 1/2in, 3/4in, 1in, 1.25in
Valve Opening Time: 5-10s
Valve Closing Time: 5-10s
Valve-Closing Time: 5-10s
Torque: 30-60kg.cm
Application: for iOS/for Android
Power:DC 12V 1A
Application Valve Type: Handle Valve

Package List:
1 x WiFi Smart Water Valve Controller
1 x Power Supply
1 x Pipe Clamp
1 x Instruction Manual

WiFi Smart Water Gas Handle Valve Controller Supports
for Alexa Google Home/Tuya
Feature:1. It is a novel design product with short range, low cost, low power consumption and high reliability.
2. Smart WiFi valves are compatible with for Amazon Alexa and for Google Home assistant, and it can allow you to turn off/on the water valve by voice.
3. It is fully compatible with wireless networks, you can remotely control the valve via your smartphone.
4. It can support timing and detect the leakage condition, which can your life.
5. No pipe is required, and it is easy to install, convenient to use and operate.
6. The mobile app synchronizes the control water valve on or off. The WiFi smart water valve with local distribution function. If you perform an on/off valve during connection to WiFi, the valve can perform scheduled synchronization tasks without WiFi connection.
7. In order to avoid a power failure, it cann't ba used. There is a manual clutch at the bottom of the device, which allows you to move the lever to close or open the valve.
8. Compatible with water pipe ball valve, electrical switch, manual control, natural gas / liquid / faucet. It is suitable for controlling water valve, gas valve, filling tank, farm irrigation equipment.
Specification:
Condition: 100% Brand New
Item Type: Water Valve Controller
Color: Black
Wireless Protocol: WiFi 2.4GHz
Wireless Range: Maximum 30m/98.4ft (Outdoor)
Valve Pressure:1.6MPA
Valve Specifications: Approx. 1/2in, 3/4in, 1in, 1.25in
Valve Opening Time: 5-10s
Valve Closing Time: 5-10s
Valve-Closing Time: 5-10s
Torque: 30-60kg.cm
Application: for iOS/for Android
Power:DC 12V 1A
Application Valve Type: Handle Valve

Package List:
1 x WiFi Smart Water Valve Controller
1 x Power Supply
1 x Pipe Clamp
1 x Instruction Manual

85 Languages Portable WiFi Smart Translator 1 4G Voice
Photo Instant Translation
Feature:1. Intelligent voice translator, communication barrier‑free.
2. Support85 kinds of translation, 43 countries photo translation, support recording translation.
3. Support offline translation in 11 countries, Chinese, English, Japanese, Korean, French, German, Italian, Spanish, Russian, Portuguese, Dutch.
4. Professional manufacturing, stable performance and high reliability.
5. Accurate development, intelligent noise reduction.
Specification:
Condition: 100% brand new
Item type: Portable Voice Translator
Material: ABS
Color: As picture shown
Size: Approx. 136x57x11mm/5.4x2.2x0.4in
Weight: Approx. 223g
LCD specification: 2.88 inch high definition screen
TP specification: COF, for G F, capacitance touching screen
Number of keys: 3 physical keys: Power (long press to turn off),, translation key x 2
Battery capacity: 1500MA battery
Data cable: 5pin micro USB
Hardware platform: MT6572 MTK 6572 dual core
Memory/FLASH: 1GB/4GB
Wi-Fi: IEEE 802.11 b/g/n
USB interface: 5pin Micro USB, 2.0 speed
Speaker: horn 8Ω/2W
Photo translation: support photo translation
MIC: High noise reduction dual MIC
Software platform: for Android 5.1
Interface style: for Google
Language: Support online translation in 85 countries, online photo translation in 43 countries, offline translation in 12 countries, free upgrade later, support OTA online automatic upgrade.
Translation time: about 60 seconds
Mode of use: independent use
Networking method: WIFI networking

Package List:1 x Voice Translator
1 x Instruction
1 x Charging cable

Portable MD-1005 metal detector. Unlike other black products of the same kind, we specially
painted the product with a blue look for children's interests. Bring more laughter and fun for your family. Our products are widely used in science education, and it helps to develop children's exploring spirit, positive thinking and judgement. When your family go to the beach for vacation, children can enjoy the pleasure of exploration and discovery while you and your lover can enjoy a leisurely two person time, undisturbed.So why not choose it as best gift for Children's lovely smiling faces.
Feature:Made with high quality plastic, lightweight and solid, for maximum durability.
High sensitivity, make sure that children are not frustrated by too long a lack of new discoveries.
Humanized design handle, easy to operate and use for kids.
Adjustable length, more conducive to exploration and play.
The battery voltage is within 7V-9V interval, and the detector can run normally and steadily.
Ordinary alkaline dry cells can work over 45 hours, energy-efficient.
Audible alarm, brings more fun and laughter for kids.
Specification:Condition: Brand New
Color: Blue
Size: Approx 16*56.5cm/6.3*22.2in
Package Weight: Approx 595g
Material: Plastic
Power:9V(6F22)
Working Frequency: 22KHz
Working Current: <50mA
Working Voltage: 7V-9V
Sensitivity: 60mm measurable pins, 140mm can measure 1 yuan coins
Fitment: Widely used in various places
Package List:1 * Metal Detector
1 * User Manual
Note:1. Not Including Battery!
2. Please allow 1-3cm error due to manual measurement. Thanks for your understanding.
3. Monitors are not calibrated same, item color displayed in photos may be showing slightly
different from the real object. Please take the real one as standard.

Features:
1. Adopt environmentally friendly PVC handle, non-slip and wear-resistant, comfortable grip.
2. After the crimping is completed, it is trapezoidal, and the crimping effect is in line with military standards.
3. The pliers body is made of high quality carbon steel plate with high strength, wear resistance and long service life.
4. With pressure adjustment gear design, according to the pressure needs to adjust to the optimal output range, to the and reliable crimping of the terminal.
5. This is an necessary tool for electrician, and manufacturing enterprises electrical maintenance man .
Specification:
Condition: 100% Brand New
Item Type: Ratchet Crimping Pliers
Material: High quality carbon steel plate
Crimp Range: 0.25~6mm²
AWG: 23-10
Length: Approx. 210mm / 8.3in
Color: Yellow
Package List:
1 x Ratchet Crimping Pliers
Note:
1. Please allow slight error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Easy to Use PLA Filament 3D Printer Consumables for Home Decoration 3D Printer
Feature:1. High quality 1.75mm 1KG PLA printer filament, the tolerance is /-0.05mm.
2. Excellent material, easy to print, easy to operate and convenient to use.
3. The printing filament is widely used in home decoration, toys, gifts, etc.
4. Filamentous PLA is easy to process, such as grinding, polishing, cutting, injection and painting
5. 10-20% polyester makes the printer long filament become more shiny.
Specification:
Condition: 100% Brand New
Item Type: Printer Filament
Material: PLA Wire
Color: Black
Filament Diameter: Approx. 1.75mm / 0.1in
Tolerance: /-0.05mm
Printing Temperature: 190-220℃
Hot Bed Temperature: Not required, but can be used (up to 50℃)
Print Speed: 20-50mm/s
Net Weight: Approx. 1000g / 35.3oz
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 Bundle x Printer Filament
Note:Keep sealed when not in use.

Features:
This saw blades set consists of 68 blades and sanding pads, can be used for your oscillating tool.
Suitable for , Bosch, , Makita, etc.
Can satisfy your different cutting and grinding needs for your DIY at home.
Made of high quality material, wear-resistant and super durable.
Good for cutting a variety of materials, wood, plastic, soft metal.
Specifications:Material: HCS
Color: (as pictures show)
Suitable for , , BOSCH, , Makita
Quantity: 68pcs
6pc-34mm Carbon steel blade
2pc-34mm teeth blade
1pc-20mm Carbon steel blade
1pc-10mm Carbon steel blade
2pc-34mm Stainless & Carbon steel blade
2pc-45mm Stainless & Carbon steel blade
2pc-45mm Carbon steel blade
2pc-45mm teeth blade
2pc-45mm Carbon steel lengthened blade
2pc-91mm Carbon steel semicircle blade
2pc-65mm Carbon steel blade
2pc-65mm teeth blade
1pc-90mm sanding pad
1pc-37mm Finger sanding pad
20pc-90mm Sanding pad
20pc-Sanding pad
Weight: Approx. 793g
Package contents:1 x Set of Oscillating Tool Saw Blades

Features:
Quick release to easily get your fire extinguisher when needed.
Simple and convenient to use, just put the knob on the extinguisher in level, and put the fire extinguisher in vertical.
Made from superior aluminum alloy, rust resistance, reliable and durable.
This bracket can be securely fastened to the front and rear of the seat armrest by an adjustable ring, or fastened to the seat mounting part by the bolt, without any drilling.
The four protruding iron beads on the fire extinguisher bracket, can prevent the fire extinguisher from falling off effectively.
Specification:Condition: Brand new
Material: Aluminum alloy
Color: As pictures shown
Size: Approx. 6.5x5.4x2in
Approx. 1.1x2in
Fitment:Fits but not limited to:Fit for Polaris RZR 900/ S900/ 900 trail
Fit for Polaris RZR 1000/ 1000 XP
Fit for Polaris RZR 700
Fit for Polaris RZR 800
Fit for Jeep Wrangler Sport
Fit for Jeep Wrangler Unlimited
Fit for Jeep Wrangler JK
Fit for Jeep Wrangler Sahara
Fit for Jeep Wrangler Rubicon
Fit for most ATV, UTV:Fit for Honda
Fit for Can Am
Fit for Kymco
Fit for Yamaha
Fit for Bobcat
Fit for Polaris
Fit for Kawasaki
Fit for Arctic Cat
Package List:1 x Extinguisher Mount
2 x 65-89 Clamp
2 x 78-101 Clamp

1 pc Tester per transistor di resistenza a transistor a diodi multifunzionali
Features:
1. Large screen LCD displays test results with clear readings
2. One-button operation, automatically turn off the power, increase the power switch, avoid battery consumption during storage and shutdown.
3. It can detect the protection diode inside the bipolar transistor and MOSFET and display it on the screen.
4. Supports dual resistance measurement and potentiometer measurement.
5. Can measure various diodes, capacitors, resistors, triodes, thyristors, MOS tubes, etc.
Specification:
Condition: 100% Brand New
Battery: Built-in 3.7V Lithium Battery
Weight: Approx. 156g / 5.5oz
Package List:
1 * Transistor Tester

Features:1. Features high , high sensitivity, high stability, and durable in use.
2. The internal high-performance device is used to precisely amplify the sensor output signal, internal voltage regulation, constant current bridge, voltage and current conversion, impedance matching, linear compensation, humidity compensation, etc.
3. Convert the mechanics and quantity into standard current and voltage signal output, which can be switched from 0~5V/0~10V.
4. It can be directly connected with the interface of the automatic control device PLC single-chip host computer terminal or computer.
5. With standard signal external adjustment, external adjustment gain function, input overload protection, output short circuit protection.
Specification:Condition: 100% Brand New
Item Type: Load Cell Transmitter
Comprehensive accuracy: 0.05%
Power supply: 15~30VDC
Output signal: 4~20mA/0~10V
Product material: aluminum
Package List:1 * Load Cell Transmitter

Overview:DTU-200 integrates the high-sensitivity dust sensor, volatile organic matter sensor, temperature sensor and humidity sensor to realize the comprehensive detection of PM2.5, VOC and temperature and humidity. It has the characteristics of multiple indicators, high accuracy, fast response, easy to carry and simple operation. It is applicable to the detection of daily life, work and study environment, and provides the basis for environmental quality assessment.
Features:
DTU-200 integrates the high-sensitivity dust sensor, volatile organic matter sensor, temperature sensor and humidity sensor.
High precision and quick response, simple operation.
It is multifunctional that can measure PM2.5, VOC, temperature and humidity.
Compact size and light weight, easy to carry and use.
It is applicable to the detection of daily life, work and study environment, and provides the basis for environmental quality assessment.
Specification:Condition: 100% brand new
Model: DTU-200
Mist, Dust, Smoke / PM2.5:Range: 0-500ug / mÂł
Accuracy: ±10%
Sampling time: 1 second
Volatile organic compounds / VOC:Range: 0-10 ppm
Accuracy: ± 10%
Sampling time: 1 second
(The VOC sensor must be preheated for 5 minutes)
Temperature:Range: -10 to 80℃
Accuracy: ±0. 3℃
Sampling time: 2 second
Humidity:Range: 0-100 RH%
Accuracy: ± 3 RH%
Sampling time: 2 second
Power supply mode:3. 7V Li-battery: BL-5C (Included)
Port: Micro USB power supply
Battery Duration:Mode DUST / PM2.5 measuring: 35 hours
VOC measuring mode: 8 hours
Temperature & humidity measuring mode: 35 hours
Package List:1* Air Quality Detector
1* 3.7 V Lithium Battery
1* USB Charging Line
1* User Manual

This is a simple and easy-to-use DC motor controller with mini size, elegant appearance and stable performance. It is made with high quality circuit board which ensures a longer service life. The input voltage can be DC 12V to 60V and output voltage is 0-100% of the input voltage. This controller is quite convenient to use.
Features:
The adjustable voltage range can be truly and adjustable from 12V to 60V.
Wide application: Suitable for DC motors within 70A.
Durable Performance: Using high quality and delicate metal shell, no rust, safe and convenient to use.
High quality circuit board ensures stable and durable performance.
Easy to use: Easily control voltage and via the adjustable knob.
Specifications:Model: PWM 70A-220S
Color: Silver
Material: Metal
Input Voltage: DC 12-60V
Output Current: 0-70A
Power: 4000W
Rated Current: 70A
Adjustment Type: Current Adjust
Adjustable Range: 0-100%
Adjustment Way: Potentiometer (linear)
Output Voltage: Linear under load
Over current Protection: 80A
Red Wire: " "
Wire: "-"
Panel Cutout Diameter: 10mm / 0.4inch
Size: Approx. 150*85*45mm/5.9*3.3*1.8inch
Weight: Approx. 586g / 20.7oz
Package List:1 x Controller
Note:1. This DC motor controller input is connected to direct current, CANNOT be connected to alternating current, or it will be burnt.
2. Make sure the positive and negative polarity is connected correctly, otherwise the controller will be damaged.
3. Please allow small size error due to manual measurement. Thanks for your understanding.

This portable hanging scale is made of high quality material, durable in use. Perfect for weighing heavy items, very practical for daily life.
Features:1. Keep the scale vertical when the scale begins.
2. Large LCD display, easy to read and record the digits.
3. When weighing, keep the weighing body in , do not touch the hanger, otherwise the weighing data will be inaccurate.
4. When the battery is displayed on the screen, it indicates that the battery is not enough. Please replace the battery as soon as possible.
5. Change the weighing unit (lb, kg, N) by pressing "UNIT" button and reset by pressing "TARE" button.
Specification:Condition: 100% Brand New
Material: Stainless Steel ABS
Color: As shown in the picture
Units: lb, kg, N
Maximum Weight: 150kg
Scale: 100g
Battery: 2pcs AAA Batteries (Not Included)
Size: Approx. 150*78*26 mm / 5.9*3.1*1.0 inch
Weight: Approx. 601g / 21.2 oz
Package list:1 * Hanging Scale (Battery Not Included)
2 * Hooks
1 * Manual
Note:1. Please don't hit or hit hard.
2. Please allow 0-1 inch error due to manual measurement. Thanks for your understanding.
3. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Feature:1. Unique capacitance sample book, suitable for electronic professionals or enthusiasts.
2. With 92 capacitance samples of 0805 series, you can easily identify the type of resistance you need.
3. This is a sample book for storing and organizing electronic components.
4. Strict quality control and quality assurance, fine workmanship, can meet your use needs.
5. Small size, light weight, easy to carry, can effectively improve your work efficiency.
Specification:
Condition: 100% Brand New
Item Type: Sample Book
Material: Plastic
Color: Black
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Sample Book

3 Rod Double Acting Air Cylinder Aluminum Alloy Double Acting Cylinder Bore 20mm
Feature:1. Double acting operation mode, strong power.
2. The cylinder with full hard oxidation treatment, high strength, corrosion resistance, fine workmanship and clear threads.
3. Three-rod cylinder, compact structure, high guidance accuracy, can withstand large lateral loads and moments.
4. Good sealing effect, high accuracy and small swing.
5. Made of high quality aluminum alloy, high hardness, high strength, rust and corrosion resistance.
Specification:
Item Type: Air Cylinder
Product Material: Aluminum alloy
Bore: 20 (mm)
Action Mode: Double acting
Standard Stroke: 20-100 (mm)
Temperature Range: 0 60 ℃
Applicable Pressure: 1.0MPa
Thread: 1 / 8in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Air Cylinder

Feature:1. Lightweight and compact size, easy to store and use, suitable for camera interface of trinocular microscope
2. The C-type installation method is adopted, and the installation and replacement method is simple.
3. Exquisite workmanship, stable and reliable performance, easy to observe the internal structure of small objects.
4. Selected high-quality aluminum alloy materials, with good durability and stability.
5. Practical microscope adapter, making the image of microscope camera clearer and more perfect.
Specification:
Condition: 100% Brand New
Item Type: Microscope Adapter
Material: Aluminum Alloy
Color: As shown in the picture
Weight: Approx.281g/9.9oz
Magnification: 1X
Upper Standard C Threaded Interface Diameter: Approx.25mm/1in
Lower interface Diameter: Approx.42mm/1.7in
Height: Approx.92.5mm/3.6in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Microscope Adapter
Note:
1. Please allow 0-1 inch error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Feature:1. It is used to attach a cow nose to a cow, applicable to cattle, cow, bull etc.
2. Exquisite workmanship and comfortable handle, it is convenient to use and labor saving.
3. The suitable handle position, and portable structure design reduce the fatigue degree during your manipulation.
4. Made of high quality stainless steel material, it is firm, durable, not easy to aging.
5. Smooth without burrs prevents from accidental hurts.
Specification:
Condition: 100% Brand New
Item Type: Nose Pliers
Material: Stainless Steel
Color: As shown in the picture
Weight: Approx.635g/22.4oz
Application: Cattle Nose Installation Pliers
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Nose Pliers
Note:
Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Feature:1. It is mainly used in cardiopulmonary resuscitation and general artificial respiratory assistance.
2. Especially at emergency, when it is too late to intubate, it can be used to directly supply air by pressing the balloon to obtain sufficient oxygen supply and improve tissue hypoxia.
3. It is a simple tool to replace artificial respirator, suitable for breathing first aid.
4. Compared with mouth-to-mouth breathing, the oxygen supply concentration is high, which can avoid direct contact between the rescuer and the patient.
5. Simple structure, convenient operation, easy to carry, adjustable, no electric device is needed, and it can be used with or without compressed oxygen source.
Specification:
Condition: 100% Brand New
Item Type: Manual Resuscitator
Material: PVC
Color: Blue
Application:
It is mainly used in cardiopulmonary resuscitation and general artificial respiratory assistance, especially when the condition is critical. When it is too late to intubate, you can use this product to directly supply air, so that the patient can get sufficient oxygen supply and improve tissue hypoxia.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Balloon
1 x Face Guard
3 x Oropharyngeal Airways
1 x Oxygen Tube
1 x Opener
1 x Reservoir Bag
1 x Plastic Box

Feature:1. Due to high‑quality combustion‑supporting shell, DC‑AC relay keeps good insulation performance, safe and durable.
2. Manufactured by high quality terminal, 5A relay keeps high conductivity material, stable and safe.
3. Via DC‑AC control method, such relay can be light and practical, easy to use in the practical life.
4. Entitled with high performance according to strict rule, such relay is easy and convenient to operate.
5. Widely used, such DC‑AC relay keeps simple installation, which keeps guaranteed quality, you can use it with confidence.
Specification:
Item Type: Relay
Brand: BERM
Model: 2K5DA
Control Method: DC-AC
Load Current: 5A
Load Voltage: 24~480V/AC
Control Voltage: 3-32V/DC
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
10 x Relay

Feature:1. This is a sample book dedicated to the storage and organization of electronic components.
2. It contains 170 kinds of 0201 series resistance samples, which can meet your basic needs.
3. The unique resistor sample book can greatly improve your work efficiency.
4. Can easily identify the type of resistance you need, improve your work efficiency.
5. Small size, easy to carry, suitable for electronic professionals or enthusiasts.
Specification:
Condition: 100% Brand New
Item Type: Sample Book
Material: Plastic
Color: Black
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Sample Book

Features:
This LCD display screen is 7 inch, 1024 * 600
Used for 3/2 or Computer display
Operating voltage: 12V power supply current requirements of more than 1A, if you are using the car power supply, you need to add a regulator to prevent interference
Signal input: 2 VGA 1 channel high-definition reversing input: Version 1.2
VGA input: 1024x600 physical resolution, support the resolution range can be 640 x 480 --- 1600 x 1200 between the arbitrary adjustment!
AV1 video input (can link DVD device or front camera)
AV2 video input (to the car automatically switch to the camera screen)
Support Plug and Play function
Support image up and down left and right flip, image 4: 3/16: 9 display format conversion
Specifications:
LCDdisplay screen: 7 inch1024 * 600
Operating voltage:12V
Rated power: 6-7W
Weight:178g
Package Included:1 pcs x LCD Screen
1 pcs x Driver Board
1 pcs x Flat Cable
1 pcs x USB power supply cord
1 pcs x Remote Control
NOTE: This product has NO function
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Description:This curing light is specially designed for dental solidification orthodontics, it comes with built-in powerful 5W LED, high strength and long life-span, rechargeable for energy saving use.
Features:Adopt 5W big power LED, long life span and low heating.
Easy operation, safety and noise-free.
Compact size, lightweight for convenient carrying.
Ideal for solidifying and reinforcing resin materials to achieve effective dental restoration.
Wired & Wireless design, it can also be used in charging.
Adjustable lighting time 5-40 seconds.
Specifications:Color: As picture shown
Optional Plug: CN Plug
Input voltage: AC 100-240V, 50/60Hz
Output Voltage: DC 3.7V
Power: 5W
Wavelength: 420-480nm
Light Strength: 1200-2000mw / cm²
Three working models: strong, gradually strong, flashing
Battery: lithium-ion battery
Battery Voltage: 4.2V
Battery Capacity: 1400mAh
Working Temperature: 5℃ to 50℃
Relative Humidity: ≤80%
Solidify Time and Depth: 5s / 3mm
Weight: Approx. 500g
Package Included:1 x LED Curing Light
1 x Light-shielding Sheet
1 x Power Adapter
1 x Light Guide Stick
1 x Base
1 x User Manual
Note:
Please kindly make a note if you need any plug adapter.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

Features:Suitable for first aid training or first aid at ambulance.
PVC transparent can perfectly fit for patient's face.
Easy to use, just insert into oropharyngeal airway to keep the patient's airway open.
No need electric device, it can be used whether it has compressed oxygen source or not.
Simple design, easy to install and use, suitable for both home use and professional use.
Specification:Condition: 100% Brand New
Material: PVC
Fitment: Adult
Package List:1 x Ambu Bag
1 x Tube
1 x Breathing Bag
1 x
4 x Breathing Tool
1 x Manual

Features:
100% brand new and high quality.
Made of high quality stainless steel, this platform is rust-resistant and durable.
The platform can provides a quite steady lifting performance, very practical.
It is convenient to use, the height is adjustable.
Widely used for height adjustment of physics, chemistry and biology experience instrument.
Specifications:
Material: Stainless steel
Size: 150*150*250mm/5.9*5.9*9.8in
Maximum Height: 250mm/9.8in
Minimum Height: 70mm/2.8in
Weight: 1362g(approx.)
Package Includes:
1 x Lifting Platform (other item is not included)

Feature:1. High‑quality S‑type beer keg coupler with pressure relief valve, suitable for most beer barrels and cola barrels.
2. Selected brass stainless steel 304 material, strong and durable, wear‑resistant, corrosion‑resistant.
3. It can be used with beer draft machine, beer faucet, beer tower, wine spear, refrigerator, wine label, with strong practicability.
4. Excellent designs, easy to use, used to connect the bottle body and the canning faucet during the canning process of wine products.
5. Used to connect kegs to dispense beer or beverages, and is suitable for bars, hotels, restaurants, living rooms or homes.
6. The beer is fed into beer drafting machine through keg connector and wine spear, cooled by draft machine, mixing valve is opened, carbon dioxide is pressed into wine barrel and the beer is released.
Specification:
Condition: 100% Brand New
Item Type: Beer Keg Coupler
Material: Brass 304 Stainless Steel
Weight: Approx. 653g / 23oz
Wine Outlet Thread: Male Thread G5/8
Inlet Connector Outer Diameter: 8mm / 0.3in
Exhaust Valve Pressure: Within 3.7Bar
Application: Used to connect the bottle body and the canning faucet during the canning process of wine products
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Beer Keg Coupler
6 x Accessory
Note:
1.Please allow 0‑1 inch error due to manual measurement. Thanks for your understanding.
2.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Features:
Plug and Play: With USB port and simple installation, no need to install any software or applications.
Read 1D 2D barcodes: The 2D barcode scanner reads all standard 1D and 2D barcodes on an electronic screen for shops, supermarkets, hospitals, ticket barriers, warehouses, and more.
Made of high quality ABS PVC PC, earthquake resistance.
Light weight and simple design: Ergonomically designed for a comfortable hand feeling.
It can scan the screen, support WeChat, alipay and other mobile payment.
Specification:
Physical Parameter
Material
ABS PVC PC
Power Supply
DC 5V/ 300mA
Weight
120±5 g (Without wire)
List
Barcode reader, USB data cable, User Manual, certificate of quality, warranty card
Size
Approx. 157 * 100 * 90 mm/ 6.2 * 3.9 * 3.5 in
Performance Parameter
Support interface
USB, RS-232 serial port
Sensor
Flat CMOS sensor
Light Source
Red LED aiming white
Processor
32-bit MCU
Support Barcode
1D: Codabar, 11, 39/ 93, UPC/EAN, 128/EAN 128, InterLeaved2of5, Matrix2of5, MSICODE, Standard2of5.
2D: QRCODE
Resolution
39 5mil, QR 8.7mil, PCS45%
Depth of field
5MIL CODE39 : 5 - 12 cm
15MIL CODE39 : 4 - 25 cm
10MIL CODE93 : 4 - 21 cm
15MIL UPC/EAN : 4 - 25 cm
20MIL QR : 4 - 25 cm
Scanning Speed
200 times / sec
Scanning Method
Manual button, automatic induction
Scanning Area
5*5 -- 30*30 cm2
Prompt Mode
Buzzer, indicator light (LED)
Print Contrast
Not less than 35%
Decoding Angle
Corner 0-360°, angle ±65°, declination ±60°
Environmental Parameter
Protection
level IP 54 certified
Operational Environment
0 - 50°C / 32 - 122 °F
Storage Environment
0 - 50°C / 32 - 122 °F
Operation Humidity
5 - 95% (no condensation)
Antistatic Ability
15KV air discharge
Seismic Resistance
Free fall 1.5m air fall
Package list:1 * Scanner
1 * USB Cable

Features:
The bore gauge is used to measure internal dimensions of work pieces by comparative method.
The bore gauge is equipped with a good guiding protective bridge which can be self-centering exactly and reliably.
The movable anvil on one side and an interchangeable on another side , which serves for setting the bore diameters.
The measuring range of bore gauge is 50-160mm.
Come with a storage case for easy carrying.
Specification:
Material: Steel
Range: 18-35mm
Accuracy: 0.01mm
Package List:
1 x Bore Gauge
Other Accessories
1 x Box

Feature:1. Great variety of use for home garage, compound bow tension draw weigh, fishing, postal shipping, professional farming, lifting, fishings.
2. Detachable hook as well as dedicated weighing loadcell lead to long time stability.
3. Automatic power off is for lower power consumption when not needed.
4. Accurate weighing capacity is provided by high quality workmanship.
5. Strong bear resistant, portable, accurate measurement and durable in use.
Specification:
Condition: 100% Brand New
Item Type: Crane Scale
Material: Stainless Steel
Color: Blue
Overall Size: Approx.29x8.5cm/11.4x3.4in
Capacity: 300 kg(600 Ib)
Weighting scales: Kilograms (kg), Pounds (lb), N
Resolution: 0.1 kg(0.2 lb)
Tare Range: 100% F.S.
Auto : ±50% F.S.
Manual : ±2% F.S.
-Tracking: 0.5e/s
Overload: 100% F.S. 9e
Maximum Safety Load: 120% F.S.
Ultimate Load: 300% F.S.
Battery Life: >150hours
Power: 3 x AA battery (Not Included)
Reading Stable Time: ≤10seconds
Auto-sleep: Stable and no action in 3 sec.
Weight: Approx.750g/26.5oz
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Crane Scale(Battery Not Included)
1 x Stainless Steel Ring
1 x Screw for Stainless Steel Rings
2 x Screw Rings
1 x Steel Needle
1 x Stainless Steel Hook
1 x Instruction Manual
Note:
1. Please allow 1‑2cm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Description:
Through your detector, you can probably search for 5cm / 2in iron and 3cm / 1.2in ordinary metals (copper, gold, and silver). Items within about 10cm / 3.9in can be detected.
Features:
Widely Use - Perfect for finding metal objects and anywhere that metal needs to be detected.
Designed to Find Metal - Search gold & silver jewelry, coins and other metal in the ground.
Adjustable Height of Metal Detector - Adjust the detector's length for comfortable use.
Detection Indication - LCD analogue display and audio indicate the detection of metal.
Large LCD Display with Backlight - Identify the metal in night or caliginous outside.
Explore metal objects buried underground. Widely used in security inspections, outdoor treasure hunting games for children, etc. (Note: not waterproof)
Specification:
Condition: 100% Brand New
Measuring range: 10CM
Power Supply: 9 (V)
Detecting metal size: Coins
Power: 1 x 9V 6F22 Battery (not included)
Frequency: 5.0 KHz
Current: Static: 10mA
Maximum: 70mA
Voltage: 7.2-9.6V
Sensitivity: US 25 Cent: 130mm
Display mode: mechanical pointer mode
Package Included:
1 x Metal Detector without Battery
Notice:Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
Please understand that colors may exist chromatic aberration as the different placement of pictures. .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:1. Microcomputer control, also can manually start and stop.
2. LED indicating fault information, which is convenient to use.
3. Compact size, light weight, practical and easy to use.
4. Solid structure, low noise, stable working performance.
5. Using high quality glass resistor, working temperature: -55°C ~ 350°C.
6. High quality potentiometer, smooth adjustment, not easy to damage, 100% imported original IC.
7. High accuracy of resistance, wide operating temperature, small drift and good stability.
8. High quality capacitors, good parameter consistency and high reliability.
Specification:Condition: 100% Brand New
Item Type: Generator Controller
Material: Plastic
Model: DSE702MS
Mounting Hole Size: Approx. 68 x 68mm / 2.7 x 2.7in
Package List:1 x Generator Controller
2 x Fixing screw
2 x Key
Note:1. Please allow slight error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
3. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px Solid #000; border-left: 1px Solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px Solid #000; border-right: 1px Solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Aspiratore A Pompa Elettrico 220V Succhia Stagno Dissaldatore Aspira Blu
Description:
Bulky, strong suction, is a thick film integrated circuit, a large component of the ideal addition to a large tin solder tool products, can be used independently with one hand, power 5 minutes after the addition of tin can work for a long time, automatically spit tin, fast and convenient, is to improve the efficiency of maintenance in a good helper!
Specification:
1. Operating voltage: 220V 50HZ
2. Heater Power: 30W
3. Electromagnetic power: 350W (instant)
4. Insulation class: E Class
5. Methods of work: continuous
Package:
1 * Drill rod
1 * Nozzle
Use Instructions:
Plug the power cord into a power source
Allow the nozzle to warm up for approx 5min
Place the tip of the nozzle against the solder you wish to remove
When the solder melts, press the button on the handle and the solder will be absorbed
Note: The item is not full-automatic, you need to use heating equipment together as assist

Features:1. Smooth Appearance Lines -- Exquisite appearance, powerful and practical, suitable for a variety of occasions.
2. Strong Bite -- Easy to use, disposable binding about 100 pages, not easy to staple, neatly bound.
3. Comfortable Handle -- Spherical treatment, non-slip and comfortable, more labor-saving.
4. High Quality Material -- Made of environmentally friendly ABS & high quality metal, it is exquisite in workmanship and difficult to rust.
5. Automatic Button -- One-click pop-up hole slot for easy binding, efficient and convenient.
6. Wide Range of Applications -- Suitable for office, school, classroom, library, warehouse, etc.
Specification:Condition: 100% Brand New
Item Type: Heavy-Duty Stapler
Material: ABS & Metal
Binding Thickness: Up to 100 sheets
Color: Silver Gray
Length: Approx. 294mm / 11.6in
Package List:1 * Stapler
Note:1. Please allow slight error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Feature:1. Double piston, fast oil discharge, strong pressure, stable oil absorption.
2. Labor-saving operation, explosion-proof materials, durable.
3. Using aluminum alloy gun head, durable, high pressure resistant, double exhaust port design.
4. The thickened spring is lengthened and the oil flow is .
5. Industrial heat treatment to that the pressure of the pneumatic valve is not deformed and aging.
6. Widely used, it can be used for lubricating equipment of agricultural machinery, construction machinery, automobile and tire equipment, light and heavy machinery.
Specification:
Condition: 100% Brand New
Item Type: Grease Gun
Color: Shown as Picture
Material: PVC Iron
Working Pressure: 6000-10000 (psi)
Extrusion Pressure: 6000-10000 (psi)
Working Pressure: 6000-10000
Type: Manual
Total Length: Approx. 440mm/15.7in
Barrel Capacity: 400cc
Scope Of Application: Excavator Mining Machine
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Grease Gun
1 x Oil Pipe
1 x Connector
1 x Metal Tube

Feature:1. With exquisite craftsmanship, 10-20% polyester makes the filament more shiny.
2. Easy to print, such filament can be widely used for home decoration, toys, gifts, etc.
3. Filamentous PLA is easy to process, such as grinding, polishing, cutting, injection and painting
4. Practical adoptability, printer filament's high quality can keep its high durability for a long time.
5. After many inspections before leaving the factory, PLA filament quality is guaranteed, you can use it with confidence.
Specification:
Item Type: Printer filament
Material: PLA Wire
Color: Gray
Filament Diameter: Approx. 1.75mm / 0.1in
Tolerance: /-0.05mm
Printing Temperature: 190-230℃
Hot Bed Temperature: Not required, but can be used (up to 50℃)
Print : 20-50mm/s
Net Weight: Approx. 1000g / 35.3oz
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 Bundle x Printer Filament
Note:Keep sealed when not in use.

Feature:1. Strong compatibility helps such animal tag reader supports for EMID / FDX‑B / ISO1784/85.
2. Due to high‑brightness OLED screen, this pet reader can display clearly in sunlight.
3. The machine has its own storage function, which can store up to 128 pcs of tag information, uploaded to the computer via a USB data cable.
4. Read response time is less than 100MS. which can improve work efficiency for one step faster.
5. Non‑contact card reading, using advanced radio frequency technology, the identification distance is longer 2~12MM, glass tube label is longer than 5CM and 30MM animal ear tag is longer than15CM, which can be related to tag performance.
Specification:
Item TypeAnimal tag reader
ColorBlack / White (optional)
ModelW90A
MaterialABS
Working Frequency134.2Khz/125Khz
Label FormatFor EMID / FDX-B (ISO11784/85)
Reading Distance2~12mm glass tube label＞5cm
30mm animal ear tag＞15cm (related to label performance)
StandardISO11784/85
Read Time＜100ms
Signal Indication0.91 inch high brightness OLED screen, buzzer
Battery900mAH lithium battery
Storage128 messages
Communication InterfaceUSB2.0
LanguageEnglish language
Operating Temperature-10℃~50℃
Storage Temperature-30℃~70℃
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Animal Tag Reader
1 x Data Cable
1 x User Manual

Feature:
This product adopts transparent shell, which is convenient to observe the operation status of electronic components the meter.
LCD backlight display is used to read data clearly.
The power consumption of the product is very low. The theoretical power consumption is less than or equal to 2 W.
The product has stable performance and can run steadily in the range of -20-55 degrees Celsius.
Products are widely used in power metering systems.
Specification:Model: DTM024
Voltage: 3x220/380V
Current: 3x20 (80) A
Accuracy level: 1.0
Standard: IEC62052-11 IEC62053-21
Frequency: 50 Hz
Pulse constant: 400imp/kWh
Display: LCD 6 2
Power consumption: ≤ 2W, 10VA
Starting current: 0.004lb
Working temperature -20~55°C
Storage temperature: -25~70°C
Working voltage: 0.9-1.1 rated voltage
Maximum voltage: 0.8-1.15 rated voltage
Annual average humidity value: ≤75%
Creep: less than 1 pulse when the rated voltage is 115% or no current
Shell color: White
Weight: 399g / 14.0oz
Package list:1 * Electric Power Meter(without battery)
Note:The actual product color may deviate from the photo due to light.
There may be a slight deviation in the measurement of product.

Features:
The crimping pliers is made of manganese steel materials,strong and durable,easy to use.
The set equipped with four JX-1601 die and screwdriver for quick replacement.
The pliers is an essential tool for electricians, and electrical repairman manufacturing companies.
Four different kinds of die to meet different needs.
The pliers is in accordance with the design of human engineering mechanics and it is labor-saving.
Specification:Crimping Range:JX-1601-01:24-14 AWG（0.25-2.5mm2）
JX-1601-06:24-10 AWG（0.25-6.0mm2）
JX-1601-08:26-16 AWG（0.14-1.5mm2）
JX-1601-2546:14-10 AWG（2.5-6.0mm2）
Material:Manganese steel
Package List:1*Crimping Pliers
1*Screwdriver
1*JX-1601-06 Die
1*JX-1601-01 Die
1*JX-1601-08 Die
1*JX-1601-2546 Die
4*Screw

Sandpaper Sheet Durable Fast Heat Dissipation Sandpaper Polishing for Grinding
Feature:1. Using excellent electrostatic sand planting process and special sand planting standards, the is more delicate.
2. Fast heat dissipation, high grinding and polishing efficiency, suitable for woodworking and home use.
3. Suitable for grinding and polishing of handicraft moulds, wood products, furniture, metal surfaces.
4. Selected high-grade alumina and silicon carbide materials, durable, wear-resistant, and long service life.
5. Can also be used in construction, automobile, mechanical processing and other industries.
Specification:
Condition: 100% Brand New
Item Type: Sandpaper
Material: High-Garde Alumina, Silicon Carbide
Granularity: P600 (Mesh)
Combining: New Improved Adhesive
Color: Yellow Paper, Sand
Uses: Construction, automobile, wood products and mechanical processing, polishing and decoration of decoration and other industries
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Bag of Sandpaper (100Pcs)

Features:
1. Used for smelting precious metals such as gold and silver.
2. Excellent thermal shock resistance, electrical conductivity and thermal conductivity.
3. Good wear resistance, strong lubrication performance and long service life.
4. High purity, high density, high mechanical strength, strong chemical stability.
5. Surface can be treated with antioxidant.
Specification:
Condition: 100% Brand new
Material: Silicon carbide graphite
Package list:
1 * Silicon Carbide Graphite Crucible

Features:100% brand new and high quality.
Oil-proof, waterproof and anti-corrosion, suitable for all kinds of environments.
design. Precise and stable. Easy installation.
Suitable for mixing station, batching machine, asphalt station, etc.
Safe and anti-explosive product, can be used in bad environment and hazardous areas.
Specifications:Model: PSD-S1
Material: metal
Type: weighting
Physical properties of materials: conductors
Process: film
Output signal: analog
Protection grade: IP67
Linearity: ±0.02（% F.S.）
Delaying: ±0.02（% F.S.）
Repeatability: ±0.02（% F.S.）
Sensitivity: 2.0mv/v
Drifting: ±0.02% F.S
Input impedance: 350±10Ω
Output impedance: 350±5Ω
Application: Mixing station, batching machine, asphalt station, etc.
Measuring range(Optional): 50kg, 100kg, 300kg, 2000kg
Quantity: 1PC
Weight: 502g(load cell 50kg), 551g(load cell 100kg), 575g(load cell 300kg), 712g(load cell 2000kg)
Wire connecting method:Input: Red wire( ), wire(-)
Output: Green wire( ), White wire(-)
Yellow wire(GND)
Package Included:1 x Weighting Sensor
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }