Kereskedelmi, irodai és ipari

PE5420-M
Power 15VA
Input 220V
Output 2*12V
Attension: Kindly advise detail specifications you require when place order.
Input voltage we can produce from 110v-380v, for this kind, also
advise clearly. Thanks for your kind cooperation!

The ultrasonic generator can monitor the power system frequency ultrasound power.
Power tube: import power tube;
PCB: double-sided two ounces;
Stable performance;
Large radiator, cooling fast.
Circuit board and vibration head (ceramic transducer) Wiring instructions:
1. The board can not load electricity;
2. No cleaning solution can not be energized cleaning;
3. Vibration first two tabs, two ceramic middle lug is positive, by the upper and lower metal column is negative, can not be reversed;
4. Transducer film on the ceramic sheet covered with a silver layer for the negative side, the other side of a large two silver layer is positive, the smaller one is negative, when the welding power supply line must be welded to the side there are two silver layer, the other side of the vibration surface, can be pasted in the washing tub; a silver layer ceramic chip is not high temperature, the power cord when welding iron temperature should not exceed 280 degrees, preferably heated iron, the iron temperature is set to 250 degrees .
5. Vibration head larger side (with screw holes) to vibrate surface can be glued to the pelvic floor cleaning, washing pots must be well grounded;
Material:plastic, metal
colour:Green
Package Contents:
1 x Power Driver
2 x 50W 40KHz Transducer
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

The product adopts passive design, direct insertion, and has lossless switched transmission of input and output signals,
The product is mainly used to select and switch among a variety of stereo signal input and output through a common set of equipment, that is, a variety of stereo signal sources of devices, such as TV audio, MP3 player, CD player, video game, mobile phone, tablet, computer, record player, need to be output on the amplifier or on active speakers,
The 6-channel audio signal selection switcher solves complicated line plug in and plug out, which uniformly connects device input signal sources to the switcher for easily selection.
The product uses standard RCA port design for input and output, and uses precise 6-level manual switch design for the switcher, with independent stereo volume adjustment control.
Input and output impedance: 10KΩ - 50KΩ
Frequency response: 20 - 20kHz
Distortion: Less than 0.002%
Insertion loss: Less than 0.01dB
Signal gain: 0dB
Signal to noise ratio S/N:more than 98dB
Number of input channels: 6-channel stereo input signal sources
Number of output channels: 1-channel stereo output
Control switch: 6-level precise manual selection switch
Switching channel: 6 channels
Net weight: 0.25 kg
colour:black
Material:metal
size:113*50*38mm
Package Contents:
1 * 6 input 1 output stereo audio signal selection switcher
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

1.Covers HF(Upconverter) VHF & UHF bands from 10KHz-1700MHz.
2.Supports AM, FM, CW, DAB , ADS-B, LSB.
3.Aluminum enclosure with internal thermal tape.
4.Plusmn0.5 PPM temperature compensated TCXO.
5.Fully assembled and ready to use.
Small size board and light weight.
USB Powered, accessories include a USB extender cable.
SMA golden female antenna connectors. It is also more durable and has lower insertion losses.
Software: SDR software
Model Number: RTL08THFR
Voltage: 5V
colour: black
Material: metal
Package Contents:
1 x Radio Receiver
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

 
 
 
 
External wiring port for easy wiring. Reduce the load on the access controller, save wiring, and reduce hidden dangers.
The power supply controller has a remote unlocking module card slot, which can be inserted into the slot and unlocked with one button.50W high power transformer, and has high utilization efficiency and large output power.
Battery over-discharge protection, automatically disconnects the battery when the battery voltage is lower than 9.5V during battery use.
The new upgraded power supply has an adjustable design with an adjustable time of 0-15 seconds.
Semi-enclosed plexiglass cover with aluminum alloy on the back for easy heat dissipation. Small size saves installation space and is easy to use.
This is a 110V - V (12V5A) access control power supply which consists of high quality electronic components and advanced international technology. It is immune to interference and provides a very stable and reliable output. Applicable to all kinds of building intercom power, can be connected to a variety of import and export control, especially applicable to a variety of electric locking drive.
Specification:
Input voltage: AC110V-240V
Output voltage: DC12V
Output current: 5A
Power: 50W
Supply lock voltage: DC 12V; NO/NC optional
Delay range: 0-15S
Product weight: 400g
Colour:as shown
Material:Plastic metal
Size:132 * 74 * 39mm
Package Contents:
1* access power supply
1* User manual
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.
 
 

Control light and colour directly on your raw images at the time of shooting;
Keep the quality of your images without excessive post production work;
Create specific effects saving time on your computer.
Same filter for all your lenses by just replacing the adaptor ring.
Rotate, slide, decentre in all directions for more precision and creativity.
Color: As shown
Material: cloth, metal, ABS
Filter Dimension: 84mm * 95mm
Focal Lengths: 48/49/52/55/58/62/67/72/77/82mm
Filter Includes:
1x ND2 Filter
1x ND4 Filter
1x ND8 Filter
1x G.ND2 Filter
1x G.ND4 Filter
1x G.ND9 Filter
1x Graduated Blue Filter
1x Graduated Orange Filter
1x Graduated Red Filter
1x Graduated Green Filter
1x Graduated Yellow Filter
1x Graduated Purple Filter
Ring Adapter Includes:
1x 49mm Ring Adapter
1x 52mm Ring Adapter
1x 55mm Ring Adapter
1x 58mm Ring Adapter
1x 62mm Ring Adapter
1x 67mm Ring Adapter
1x 72mm Ring Adapter
1x 77mm Ring Adapter
1x 82mm Ring Adapter
Note: This is not original cokin filter product.
Package includes:
12x Color Filters
9x Adapter Rings
2x Holder
2x Lens Hood
2x 6-Slot Cases
3x cleaning cloth
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

1.External connection interface, convenient connection. 50W high power transformer.
2.Provide 5A current output. There is remote control module lock slot in the access control system.
3.Battery anti-polarity protection (only fuse is burnt when the battery is connected backwards, and the power will not be damaged).
4.Overdischarge protection of the battery. When the battery voltage is lower than 9.5v during the use of the battery, the battery is automatically disconnected.
5.New upgrade power adjustable design, adjustable time for 0-15 seconds.
Input Voltage: AC 110V-240V
Output Voltage: DC 12V
Output Current: 5A
Supply Lock Voltage: DC12V, NO, NC Optional
Delay Range: 0-15s
Power: 50W
Size:212mm*172mm*70mm
Material:metal
Colour:As shown in color
Package Contents:
1 * Access control power supply
1 * User manual
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Type:
battery holder for 2x 18650;
battery holder for 3x 18650;
battery holder for 4x 18650
Weight: 14g; 21g; 26g
Size:
2x 18650 Case Holder Approx. 78x40x24mm;
3x 18650 Case Holder Approx. 78x60x24mm;
4x 18650 Case Holder Approx. 78x79x24mm;
You can use this case with your own battery to form power system supply
Made of ABS material, lightweight, convenient to carry
Easy to install
Material:ABS
Color: Black
Package Contents:
10x Battery Case Holder (Battery Is Not Included!)
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3 cm.

Built-in IC detects cell voltage current. And remember the number of uses!
Detection and protection battery:Overheat protection, overvoltage protection, undervoltage protection, overcurrent protection, overcharge protection.
All the new series of Makita achieve low voltage shutdown. Cooperate with many power tool factories!
PCB design may change due to changes in the supply chain and processing technology.
Suit for Lomvum Zhipu Hongsong Jingmi (no Original for Makita) 18V Lithium Battery; note: This product is component without battery core. It is used to repair and assemble batteries pack, only for people who are familiar with battery performance and have practical experience in battery assembly.
Preparation before assembly:
If a new core is used, please note: 18650 power lithium battery core must be selected; A group of six cores must be equipped with resistance and capacitance to make their voltage the same.
If the old battery is repaired, please test the voltage at both ends of each cell. If the voltage is different, please charge each cell to the same voltage value.
Very important: Ensure that the voltage of each cell is the same before welding PCB.
Specifications: 15-Hole/10-Hole
Different production batches, some accessories colors the appearance is different, the function is the same.
Colour: black, silver
Material: metal, plastic
Package Contents:
2 set * Battery Case
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Built-in IC detects cell voltage current. And remember the number of uses!
Detection and protection battery:Overheat protection, overvoltage protection, undervoltage protection, overcurrent protection, overcharge protection.
All the new series of Makita achieve low voltage shutdown. Cooperate with many power tool factories!
PCB design may change due to changes in the supply chain and processing technology.
Suit for Lomvum Zhipu Hongsong Jingmi (no Original for Makita) 18V Lithium Battery; note: This product is component without battery core. It is used to repair and assemble batteries pack, only for people who are familiar with battery performance and have practical experience in battery assembly.
Preparation before assembly:
If a new core is used, please note: 18650 power lithium battery core must be selected; A group of six cores must be equipped with resistance and capacitance to make their voltage the same.
If the old battery is repaired, please test the voltage at both ends of each cell. If the voltage is different, please charge each cell to the same voltage value.
Very important: Ensure that the voltage of each cell is the same before welding PCB.
Specifications: 15-Hole/10-Hole
Different production batches, some accessories colors the appearance is different, the function is the same.
Colour: black, silver
Material: metal, plastic
Package Contents:
2 set * Battery Case
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

High-quality pure fashion print cotton webbing, matched soft back material and high-tensile plastic fasteners to ensure a great fashionale camera neck shoulder strap
The universal interfaces and quick connect system are compatible with various DSLR / SLR / Digital Camera (DC) and Fujifilm Instax Camera, like Canon, Nikon, Sony, Samsung, Pentax, Mini 7s, Mini 8, Mini 8 , Mini 25, Mini 50s and Mini 90 ETC
The adjustable length makes the camera strap applicable to most camera users.
The personalized and eye-pleasing design will highlight your camera and your travel
It is time to change a new camera strap. Our every new camera strap is going through over 20 processures from choosing the fabric to completing the strap. It combines the fashion, aesthetics, conciseness and personality, and deserves your favor.
Color: Flower Floral Black
The adhesives used are safe and pollution-free.
Interfaces: universal type / quick connect system
Materials: nylon, cotton canvas fabric
Total Length: 139cm
Length: adjustable, 73cm in Cotton Canvas Part and 33cm / side in Nylon Webbing Part
Width: 37mm
Thickness: 3.5mm
Instructions:
Matched with whatever type of camera, it will quickly catch the eyes.
The universal interfaces are compatible with cameras made by different manufacturers.
Package Contents:
1 x Camera shoulder strap
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Voice Control:for Amazon Alexa Echo and Google Home IFTTT
The Wi-Fi dimmer module designed to transform your traditional switch(push switch) into Wi-Fi switch that allows the connected device to be controlled via a smart phone as well as a traditional switch.
Mini design : Intelligent dimmer is suitable for (SCR lamps) with power less than 150W, ( Ceiling light, downlight, corridor light, table lamp, garden light. etc... ) Main functions: Smartphone Remote control , Time switch , Voice control , Can adjust the brightness according to your needs!
Control Channels:3 Channels
Features:Flashing
Max Speed:Can be controlled anytime, anywhere
Model Number:WIFI-D01
Scale:1:1
Make life easier
Wifi Smart Light Triac dimmer switch helps to switch lights in setting time, smart phone's app control and Voice control , to make life easier and wiser. No need to get up in the cold winter to turn on the light.
Voice control Dimmer light switch
The light dimmer switch supports stepless dimming function, can adjust the brightness according to your needs, can make the lamp brighter in the dark, convenient and easy to operate.
Warm tips:
Scan the QR code on the QR code card to download the "Smart Life" APP and read the user manual before using it.
This Wi-Fi Press switch must be connected to Live wire and Neutral wire .
If you use ordinary LED light, brightness will not adjust by the wifi and the button, suggest you use timer lamp.
The total output of the luminaires or several luminaires used together must not exceed 110W.
Input Voltage : 220V~240V / 50Hz
Wiring : Live wire and Neutral wire
Max. Load Power : 150W
WiFi Standard : 2.4GHz 802.11 b/g/n
App Name : Tuya Smart/Smart Life
Work Life : 100,000 times for operation
Size : ( 0.09 * 1.85 * 2.03 ) inch
Net Weight:80g/2.82oz
colour:white
Material:plastic
Package Contents:
1 * Smart WiFi switch
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Material: This sturdy, cut-resistant glove is made of high quality material and is sustainable
Easy to use: Gloves with good permeability are easy to wear and easy to remove
Excellent protection: These rugged cut-proof gloves are hard to cut, prevent or reduce the risk of cuts and protect your hands
Application: Cutting resistant products are widely used in industrial, construction and food processing markets
The gloves can be worn on either the right or left hand, and a blue buckled belt prevents them from falling off
colour:Silver blue
Material:Stainless steel wire
size:24 x 11cm
Package Contents:
1 x Glove boots
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Gender:Male-Female
Connector A:XLR
Connector B:Jack
Type:o Extension Cable
Excellent signal transmission applies especially for stringent requirements.
Suitable for connecting microphones,etc.
Great connection between o devices.
colour:Black silver
Material:alloy
Size:0.3M
Line Diameter:6mm
Package Contents:
1 * XLR Male to TRS Female Adapter
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Color:Black
material: plastic
New high quality
Package Includes :
1x 1 FEMALE TO 2 MALE car audio parts
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3 cm.

Product Name: Button Battery Holder
Suitable for: for CR2032 battery (not included here)
Material: plastic, metal
Color: coffee
Size: 24 x 15 x 5mm
Inner diameter: 20 mm
Net weight: 9g
Package Contents:
10 x button battery holder
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /-1-3cm.

This camera mount adopts qualified aluminum alloy material, solid, firm and durable.
The articulating knob increase the friction of it, make it more tight and secure.
There is 1/4 inch screw on the two sides, you can use screw to install your different equipments.
It's 180 degree rotatable, can be freely adjusted to meet your needs.
Great accessory for camera and DSLR equipment. Can be mounted directly to a DSLR or camcorder's shoe mount, and allows for the attachment of a full array of video accessories.
Fit for:
For cameras, monitors and led lights, camcoders, mirophones, or devices with 1/4 inch
Condition: 100% Brand New and High Quality
Material: Aluminum Alloy
Color: Red Black
Screw: 1/4 inch
Length: Approx. 10cm / 3.94inch
Package Contents: 1 * Dual Ball Adapter
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

4 screw locking Design
One bent pointed tip and one bent flat tip
Fits grip ring of telescope camera lens, optical lens
Adjustable opening from 5 to 110mm(4.3 inch)
Opens grip ring of camera body, Fits some two lens graphics camera
color:silver
Material: stainless steel
Package Contents:
1 x Repair tool
4 x screws
1 x wrench
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Colour: Black
Material: ABS
Model Number:NP-FW50 Dummy Battery w/DC Power Bank (5V 2A) USB Adapter
Package:Yes
Features:
USB port, plug and play, very convenient.
Need 5V 2A power bank, mobile power or charging plug (not included) for power supply, largely prolong the shooting time of your camera.
Adopts multi-protection technology, such as short circuit protection, over-voltage protection and over-current protection, which ensures the absolute safety during use.
Cable length is up to 1.5m. Long enough, very convenient to put your own power bank or mobile power in your pocket or bag, or at somewhere else.
Specifications:
Model: NP-FW50
Compatible Camera Models:
For Sony NEX-3 series, NEX-5N/5R/5C/5T series, NEX-6 series, NEX-7 series;
For Sony α7 series (Alpha a7, a7R, ILCE7/B, ILCE7K/B, ILCE7R/B, ILCE-7, ILCE-7R);
For Sony A33, A35, A37, A55;
For Sony α5000, α5100, α6000, α6300;
For Sony RX10 series
Input: USB 5V 2A
Output: 7.6V
Power Supply: Power bank, mobile power and charging plug (not included)
Protection: Short circuit protection, over-voltage protection and over-current protection
Item Weight: 62g / 2.2oz
Package List:
1 * NP-FW50 Dummy Battery
1 * DC Power Bank USB Adapter Cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Size: 43*115*23mm
Housing material: plastic
Remote control distance: more than 10 m
Battery Type: 2x AAA battery( not included)
Power supply type: DC 3V
Color: grey&white
Usage: Replace the battery, can be used directly
Convenient and intuitive, clearer display, durable.
Simple to use, convenient, key no smell, nontoxic, soft to the touch.
Fit for SAMSUNG ARH-447 ARC-426 ARC-477 ARH-420 A/C Air Conditioner.
Notice: Remove the batteries when not being used for a long time.
Package included:
1 x Remote Control
Samsung are registered trademarks of Samsung, Inc. Products are Samsung compatible and not endorsed by Samsung, Inc.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

100% Brand new and high quality!
S-Video socket. Three colour coded phono sockets
Selection switch, allowing the adaptor to be used for input or output of Audio/Video signals.
Scart to 3 x RCA phono sockets and a 4-pin S-video socket
Switched input or output of S-video, stereo/mono audio and video
Color: Black
Material: plastic metal
Size: Approx. 6.5cm x 5.5cm x 2.5cm
Package includes:
1 x Scart to Scart S-Video 3 RCA Adapter
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

3.5mm jack plug to 2 x RCA Splitter/ Y adapter
Suitable for connecting 2 RCA (Twin phono) audio cables to one device with 3.5mm jack output / Input.
It can also connect PC sound (card) or mp3/ mp4 player to surround sound speakers / h fi / amplifier
Easy to use just plug and play
Material:ABS
Color: Black, Gold Plated Plug
Weight:6g
Size: 48 x 25 x 13 mm (L x W x H)
Package Contents: 1 x 3.5mm Stereo Male to Dual 3.5mm Stereo Female Audio Adapter Converter
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

model : 3070
Specification : 30mm x 70mm, high-strength magnetic anti-magnetic
Exterior: full height 17mm.
type : Electric type (moving coil type)
shape : rectangle
rated power : 5 (W)
Frequency response : 20-200 (kH2)
SQ : 89 (dB)
Composition : Single
Rated impedance : 8 (Ω)
Sensitivity : 82 (dB/W)
Harmonic distortion : 2(TMD% )
armonic frequency : 680 ± 20% Hz
Use:LCD TVs, laptops, speakers, etc.
Color: as shown
Material: Plastic Metal
Package Contents:2 x Speakers Horn
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

1. Built-in IC detects cell voltage current. And remember the number of uses!
2. Detection and protection battery:Overheat protection, overvoltage protection, undervoltage protection, overcurrent protection, overcharge protection.
3. all the new series of Makita achieve low voltage shutdown. Cooperate with many power tool factories!
4. PCB design may change due to changes in the supply chain and processing technology.
5. Suit for Lomvum Zhipu Hongsong Jingmi (no Original Makita) 18V Lithium Battery; note: This product is component without battery core. It is used to repair and assemble batteries pack, only for people who are familiar with battery performance and have practical experience in battery assembly.
Preparation before assembly:
1. If a new core is used, please note: (a). 18650 power lithium battery core must be selected; (b). A group of six cores must be equipped with resistance and capacitance to make their voltage the same.
2. If the old battery is repaired, please test the voltage at both ends of each cell. If the voltage is different, please charge each cell to the same voltage value.
Very important: Ensure that the voltage of each cell is the same before welding PCB.
Specifications: 10-Hole/15-Hole
colour: black
Material: plastic
Package Contents:
1 set x Battery Case
Due to Different production batches, Some accessories have different colors and appearances, but have the same function
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

1. Built-in IC detects cell voltage current. And remember the number of uses!
2. Detection and protection battery:Overheat protection, overvoltage protection, undervoltage protection, overcurrent protection, overcharge protection.
3. all the new series of Makita achieve low voltage shutdown. Cooperate with many power tool factories!
4. PCB design may change due to changes in the supply chain and processing technology.
5. Suit for Lomvum Zhipu Hongsong Jingmi (no Original Makita) 18V Lithium Battery; note: This product is component without battery core. It is used to repair and assemble batteries pack, only for people who are familiar with battery performance and have practical experience in battery assembly.
Preparation before assembly:
1. If a new core is used, please note: (a). 18650 power lithium battery core must be selected; (b). A group of six cores must be equipped with resistance and capacitance to make their voltage the same.
2. If the old battery is repaired, please test the voltage at both ends of each cell. If the voltage is different, please charge each cell to the same voltage value.
Very important: Ensure that the voltage of each cell is the same before welding PCB.
Specifications: 10-Hole/15-Hole
colour: black
Material: plastic
Package Contents:
1 set x Battery Case
Due to Different production batches, Some accessories have different colors and appearances, but have the same function
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Colour:black
Material:plastic
Size:50 x 56 x 18mm
Package Contents:
5 x Amplifier Board
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

This remote control can be used as an alternative or an additional or replacement remote control.
Portable size, easy to use.
You can replace the previous one or the broken one.
Easy to use keyboard with multicolored keyboard.
Material: ABS
Power: with 2 AAA batteries (not included)
Color: Black
Size: 158x58x39MM
Package Contents:
1 x TV remote
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Use:Face
Gender:Male
Features: 100-240V 50/60Hz 9W
Suitable for all kinds of electric shavers, hair clippers, Barber, Barber scissors and a
ariety of products with charger electric shaver chargers
Compatible Models:
HQ5 Series:
HQ560,HQ586,HQ568
HQ6 Series:
HQ6070,HQ6073,HQ6075,HQ6090,HQ6095,HQ6075,HQ6095
HQ7Series:
HQ7290,HQ7240,HQ7120,HQ7140,HQ7160,HQ7180,HQ7260,HQ7310,HQ7320,HQ7340,HQ7350,HQ7360,HQ7380,
HQ7390,HQ7100,HQ7200,HQ7240,HQ7290,HQ7742,HQ7760,HQ7762,HQ7780,HQ7782,HQ7120,HQ7141,HQ7142,
HQ7143,HQ7165,HQ7260,HQ7310,HQ7330,HQ7350,HQ7363,HQ7800,HQ7890,HQ7300,HQ7320,HQ7340,HQ7360,
HQ7380,HQ7390,HQ7740
HQ8Series:
HQ8140.HQ8160.HQ8170.HQ8885,HQ8890,HQ8894,HQ8240,HQ8250,HQ8260,HQ8270,HQ8100,HQ8142,HQ8150,
HQ8174,HQ8141,HQ8155,HQ8172,HQ8173,HQ8200,HQ8240,HQ8241,HQ8250,HQ8253,HQ8260,HQ8261,HQ8270,
HQ8290,HQ8445,HQ8825,HQ8845,HQ8865,HQ8875,HQ8885,HQ8893,HQ8830,HQ8850,HQ8870,HQ8880,HQ8882
HQ9 Series:
HQHQ9070,HQ9080,HQ9090,HQ9160,HQ9170,HQ9190,HQ9100,HQ9140,HQ9160,HQ9020,HQ9161,HQ9190,HQ9199
RQ10 Series:
RQ1050,RQ1060,RQ1085,RQ1095
RQ11 Series:
RQ1150,RQ1160,RQ1180
RQ12 Series:
RQ1250,RQ1260,RQ1280,RQ1290
HS8 Series:
HS8020,HQ8420,HS8060,HS8040

Input Voltage Range: AC 100V - 240V 50-60Hz 0.8A
Output Voltage: DC 12V 2A and 5V 2A
Size: Approx. 10.7 x 4 x 3cm (L*W*T)
Cable Length: Approx. 35cm
Include 5V and 12V power Voltage for Hard Disk Drive, CD/DVD-Rom etc.
100% Brand New. And high quality
Color: Black
Material: plastic, metal
Package Contents:
1x 12V 5V AC Adapter Hard-Disk Power Supply
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.The measurement allowed error is /-1-3 cm.

Smallest and lightest way to mount your camera, ABS material offers perfect protection from dust, dirty and scratches.
This frame mount contains fine cut-outs for USB, Micro-SD and Micro-HDMI ports, allowing you complete access to the ports which is convenient for data offload and charging.
Extendable supporting arm makes adjustable and multi-angled shooting possible.
Optimal choice to record during long and low-speed activities.
Delicate design but low-profile, it tries to provide most warm and compact snug for your camera.
Easy to carry, best guard who gives most effective and durable protection to your camera;
HDMI, USB, Micro-SD fully accessible without detachment;
Compatible with GoPro Hero 6 /GoPro Hero5;
Suitable for low-speed and long-term shooting.
Type: frame border for GoPro Hero 6 /GoPro Hero 5
Dimension: 8.5*4.6*8cm
Weight: 55g
Color: black
Material: ABS
Package included:
1x Frame border for GoPro Hero 6 /GoPro Hero 5
1x Quick pull movable socket
1x Screw
Note:
1. Only can be used in normal temperature condition, extreme environment not allowed
2. Case Only, cameras not included.
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Suitable for 18650 battery,not suitable for 26650 battery；AAA battery battery holder suitable for 3AAA battery,not AA battery
Material: Plastic；Plastical/Metal
Color: White；Black
Weight:4g；7g
Length: Approx. 6cm/Inner dimeter: Approx. 2cm；Length:Approx. 65mm/Diameter: Approx. 21mm
Package Content:
1x 18650 Battery Tube
1x AAA Battery Holder
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

100% Brand new and high quality.
Quantity: 1
Style: Casual
Compatible For Fujifilm Instax Mini 8 7s Cameras
This camera case is lovely and colorful
Package Include:
1set Colorful Filter 4 Colors Magic Lens For Fujifilm Instax Mini 8 7s Cameras
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3 cm.

Use: TV
Wireless Communication: IR
Support APP: No
Model Number: BN59-01303A
Package: Yes
Colour: Black
Material: PC
Frequency: 433 MHz
Easy and full access to all the buttons
This is a high quality remote control
No program needed, just need install new battery to work
The remote control is compatible with
UE40NU7170 UE43NU7170 UE40NU7199 UE 40NU7179 UE43NU7179 UE43NU7190
UE40NU7190 UE43NU7199 UE49NU7170 UE49NU7179 UE55NU7170 UE55NU7179
UE65NU7179 UE65NU7170 UE75NU7170 UE75NU7179 UE43NU7090 UE43NU7095
UE50NU7095 UE55NU7090 UE55NU7095 UE50NU7090 UE65NU7090 UE65NU7095
UA43NU7090 UA43NU7100 UA43NU7100W UA43NU7100WXXY UA49NU7100 UA49NU7100W
UA49NU7100WXXY UA50NU7090 UA55NU7090 UA55NU7100 UA55NU7100W UA55NU7100WXXY
UA58NU7103 UA58NU7103K UA58NU7103W UA58NU7103WXXY UA58NU7105 UA65NU7090
UA65NU7100 UA65NU7100W UA65NU7100WXXY UA75NU7100 UA75NU7100W UA75NU7100WXXY
Package Contents:
1pcs * Remote Control (Without Battery)
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

OTG adapter (on the adapter) gave you a direct and convenient way to share data, files, video, audio between two digital devices, such as MP3, MP4, mobile phone and tablet.
Let your smartphone be a functional USB enabled port
Synchronize data (files, images, video, music) with your USB flash disk, USB card reader, mobile phone, mp3.
Use your smartphone easier by connecting the USB keyboard / USB mouse.
Silicone shell and hat protects the item perfectly.
Suitable for 5-pin Micro-USB smartphone.
colour: Black silver 
Material: PC metal
Package Contents:
1*Type-C USB to 2.0 OTG Adapter
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

99.9% PROTECTION STICKER. This is a 99.9% protection sticker for cell phone, laptop, etc.
B.WIDELY AND EASY TO USE. This Electronic devices protection sticker can stick to your for mobile phone, radio, iPad, , Laptop, Wifi Router, TV, Tablet PC, Microwave Ovens, refrigerator, air-conditioner, wash machine, hair-dryer, and all electronic devices. Just easily stick to the back or cover case of your Cell Phone and any other electronic devices.
Portable SMART SIZE. Smart size and thin design, you can stick the sticker anywhere of your cell phone and electronic devices. It is portable to anywhere without any worries of heavy weight. The unique shield protector modeling made your phone special and easy to identify.
SUITABLE FOR ALL YOUR FAMILIES AND LOVERS. These Cell Phone stickers can be used for any one who uses electronic products, and it is extremely suitable for our kids, pregnant, elders, workers, etc.
LIFETIME USE WITHOUT UPDATE. This is not an one-time cell phone protector, it is also no need to upgrade, no need to replace yearly, instead, it can lifetime protection and sticky.
Colour:gold
Material:24K gold pattern plating
Package Contents:
10 * Anti radiation sticker
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Model: Converter EXK To MMCX Female Adapter
Wire hole diameter:6.7mm
Type:Converter adapter
Function:Wire connector
Application:Audio &Video
Connection method:Solder
Net weight:About 1.6g/pcs
colour:Black
Material:Plastic Metal
Package Contents:
1 x Adapter
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Equipped with 16 precise bits, a variety of screwdriver bits of different specifications can easily meet different needs.
All drill bits are made of S2 tool steel with high surface finish and high hardness.
It is suitable for ordinary household appliances such as watches, digital cameras, radios, tablet computers, smart phones, and some electronic products.
Non-slip screwdriver handle, soft rubber, comfortable feel. Sweat-proof and wear-resistant. You will enjoy it during use. Lightweight and compact design. It is easy to carry and store at home and at work.
Practical gifts: The best gifts for fathers, friends, and people who like to fix things.
Screwdriver Size(LxW): About 235x40mm/9.25x1.57inch
size: 25.5 x 4.3 x 4.4cm
Material:steel
colour:As shown
Package Contents:
1 x 19 in 1 screwdriver set
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Comfortable grip, thin and light at your fingertips.
press at will without leaving fingerprints, and will not fade.
With the ring flash shell fill light, sufficient light makes the image clear, brings excellent background blur, the protagonist is more prominent, and the portrait mode is more colorful.
When taking a selfie, the light ring bounces up with one button, and the three-dimensional sense of the face is quickly improved.
Eliminate the trouble of wiring, easily control the power, and intelligently fill light anytime.
Colour:White / Red / Green
Material:PC
Size:17 x 9 x 2cm
Package Contents:
1 x mobile phone case
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Name: PCB board
Suitable for Worx 20V BMS WA3572 WA3530 WA3553
Colour: green
Material: plastic, metal
Package Contents:
1 * PCB board
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

1. Using TPA3255
2. The main filter electrolytic capacitor adopts the imported famous brand for Erkang with a capacity of 2200UF/63V x 5, which guarantees strong and continuous power support.
3. High-precision chip resistors are selected for the resistors to ensure a good signal-to-noise ratio of the whole machine.
4. Adopt special magnetic ring inductor for audio to ensure the sound is clear and powerful.
5. The PCB adopts 1.6mm thick double-sided board, 2.0 oz copper thickness, and full tin spraying process to ensure good passing performance of large and small currents. First-class PCB quality.
Basic performance parameters:
Product name: TPA3255 digital power amplifier board
Working method: Class D
Quiescent current: 500mA
Work efficiency:. more than 90%
Output Power:
315W/4 ohm x 8, distortion 10%
185W/8 ohm x 8, distortion 10%
260W/4 ohm x 8, distortion 1%
150W/8 ohm x 8, distortion 1%
Frequency response: 20Hz to 20KHz
Dynamic range: more than 100 dB
Signal to noise ratio: (SNR) more than 111dB
Working voltage: DC24-48V switching power supply (DC)
colour: black
Material: PCB metal
size: 350 x 132mm
Package Contents:
1 x power amplifier board
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

[Model Compatibility]: Only applicable to the for 10.2-inch new iPad 8/7th generation released in 2020/2019. iPad Air 3rd Generation 2019 is not compatible with any other iPad versions. Please confirm the model before buying
[Protection]: This protective case is composed of high-quality and soft PC lining, with a built-in screen protector. It provides full-body protection for your iPad in daily use to prevent scratches, shocks, and vibrations.
[360°rotating bracket and hand strap]: 360°rotating sturdy bracket provides multiple angle brackets, allowing you to enjoy the most comfortable keyboard typing and watching movies
[Product material]: made of PC silicone material, environmentally friendly, non-toxic and odorless; anti-dropping; anti-aging and discoloration; easy to clean
[With pen holder]: The pen holder is convenient for you to take and put the apple pen at any time. (Note: for Apple Pencil is not included.)
Type: 10.2 inch flat protective cover
Applicable models:for ipad Pro 2020/2019 10.2
size:264x210x26mm
Material:PC silicone
colour:Black green
Package Contents:
1 * 10.2 inch flat protective cover
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

[HIFI audio playback] Supports high-fidelity sound up to 32-bit/384 kHz, while others are 16-bit/48 kHz. The built-in high-quality DAC chip ensures stable and lossless audio signal transmission without current noise. The USB C to aux adapter is compatible with CTIA and OMTP.
[Wide compatibility] Compatible with most C-type devices: for Google pixel 5 4 3 2 XL, for Samsung Galaxy S21 S21 S21 Plus S21 Ultra 5G S20 Ultra Z Flip S20 s10 s9 s8 plus, note20 5G Ultra, note 10 9 8, for Huawei mate 30 20 1 0 pro, p30 p20, One plus 6T 7 7Pro, etc.
[Quick Charge] This USB C headset adapter and charger support PD charging up to 60W, you can charge your phone while listening to music. Note: It may not support QC control of some new phones. It is recommended to use a PD wall charger to get a faster charging speed.
[Multi-function same screen device] This compact usb-c to aux adapter allows you to listen to music and answer calls through headphones, and supports wire control. Plug and play, ultra-portable-no drivers required. The ultra-thin design allows you to connect to headphones and smartphones anytime, anywhere.
colour:Silver gray / Black
Material:plastic
size: 12.7cm
Package Contents:
1 x 2 in 1 USB C Headphone Adapter
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

[HIFI audio playback] Supports high-fidelity sound up to 32-bit/384 kHz, while others are 16-bit/48 kHz. The built-in high-quality DAC chip ensures stable and lossless audio signal transmission without current noise. The USB C to aux adapter is compatible with CTIA and OMTP.
[Wide compatibility] Compatible with most C-type devices: for Google pixel 5 4 3 2 XL, for Samsung Galaxy S21 S21 S21 Plus S21 Ultra 5G S20 Ultra Z Flip S20 s10 s9 s8 plus, note20 5G Ultra, note 10 9 8, for Huawei mate 30 20 1 0 pro, p30 p20, One plus 6T 7 7Pro, etc.
[Quick Charge] This USB C headset adapter and charger support PD charging up to 60W, you can charge your phone while listening to music. Note: It may not support QC control of some new phones. It is recommended to use a PD wall charger to get a faster charging speed.
[Multi-function same screen device] This compact usb-c to aux adapter allows you to listen to music and answer calls through headphones, and supports wire control. Plug and play, ultra-portable-no drivers required. The ultra-thin design allows you to connect to headphones and smartphones anytime, anywhere.
colour:Silver gray / Black
Material:plastic
size: 12.7cm
Package Contents:
1 x 2 in 1 USB C Headphone Adapter
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

1. Support 2.4-inch Contact screen function
2. Support broadcast search
3. Support the numeric keyboard to directly input the frequency
4. Support HAM band shortcut channel
5. Support AM bandwidth: 1-6K; Support SSB bandwidth: 0.5-4.0K
Built-in lithium battery 3.7v /2000MA
TYPE-C charging interface, maximum 1.5A charging current
Support TYPE-C interface upgrade program
Support 3.5MM stereo audio output
Antenna interface BNC
Support 3.5MM audio jack FM antenna
Output audio power 1.5W
Frequency Range:
FM: 64-108MHZ/RDS function
LW: 153-500KHZ
MW: 520-1710KHZ
SW: 1730-30000KHZ
SSB: 1730-30000KHZ
colour: black
Material: aluminum alloy
Package Contents:
1 x Radio Receiver
1 x Antenna
1 x Corner cushion
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

3-Speed Turntable - Adopting 3 speed to achieve brilliant balance. High, middle and low speed make this record player stylus suitable for different music bands.
Precise Compatibility - This record cartridge is a professionally designed replacement for AT95E stylus needle. Very professional and reliable.
Brilliant Audio Frequency - The oval stylus is capable of high precision following the sound groove of vinyl record, enabling it to produce brilliant audio frequency to give you splendid music enjoyment.
Super Clear Sound - The record needle provides you with a super clear sound with no noise. Give you back the original sound.
Causing No Damage - This vinyl stylus is made of high quality material, which doesn//'t cause damage to records. Very awesome and reliable.
Product type: Record Player Stylus
Response frequency: 20-20,000Hz
Output voltage: 3.5mV (1kHz, 5cm/sec.)
Channel separation: 20dB (1kHz)
Output balance: 2.0dB (1kHz)
Needle pressure: 1.5-2.5g( 2.0g standdard)
Coil impedance: 2.8k ohm (1kHz)
DC coil impedance: 410 ohm
Recommended load impedance: 47k ohm
Load capacitance: 100-200pF
Inductance of coil: 400mH (1kHz)
Static obedience: 20 x 10-6cm/dyne
Dynamic obedience: 6.5 x 10-6cm/dyne(100Hz)
Tip shape: Oval(0.4 x 0.7mil)
Vertical Tracking Angle: 20 degree
colour: green
Material: plastic metal
Package Contents:
1 x Record Player Stylus
2 x Screws
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Motherboard screw M3*4 50PCS
Motherboard gasket M3*8 70PCS Chassis screw M3.5*6 nickel color 10PCS Chassis screw M3.5*6 black 10PCS
Motherboard copper pillar N3*6 6 30PCS Chassis screw M3.5*6 30PCS Motherboard screw M3*5 50PCS
Fan screw M5*10 nickel color 30PCS
Fan screw M5*10 black 30PCS Hard disk screw M3.5*5 50PCS
Specification Quantity:
Motherboard screw M3*4 50PCS
Motherboard gasket M3*8 70PCS
Chassis screw M3.5*6 nickel color 10PCS
Chassis screw M3.5*6 black 10PCS
Motherboard copper pillar N3*6 6 30PCS
Chassis screw M3.5*6 30PCS
Motherboard screw M3*5 50PCS
Fan screw M5*10 nickel color 30PCS
Fan screw M5*10 black 30PCS
Hard disk screw M3.5*5 50PCS
Colour:transparent
Material:Carbon steel
Size:12.8 x 6 x 2.3CM
Package Contents:
1 * 360pcs screw box
1 set * screw
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

1. Reflective tape has strong adhesion, will not fall off easily, good product quality, and long service life
2. Our warning tape are equipped with high‑visibility Red and white patterns, which reflect light better at night or in low‑light environments
3. Has good waterproof characteristics, does not fade and does not delaminate, the surface is flat, smooth and wear-resistant
4. Self-adhesive tape has chemical resistance and weather resistance, and can be used for a long time without frequent replacement
5. Wide range of applications, suitable for toll stations, body stickers, ship stickers, construction equipment and other safety warnings
Item Type: Reflective Tape
Fitment for: roads, service vehicles, multi-purpose trucks, ship stickers and other safety warnings
Colour: red white
Material: PET
Size: 20cm x 45.7m
Package Contents:
1 Roll x Reflective Tape
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

PERFECT NOISE REDUCTION - Provides Max Noise Reduction For The Peace, Quiet, and Sleep You Deserve. Perfect For Snoring, Shooting, Yard Work, Concerts, And All Other Loud Activities. Brand new and high quality.
WASHABLE AND REUSABLE - Our reusable silicone ear plugs are designed to last for a long period of time for daily use.
REMOVABLE CORD - cord can be removed and inserted back.
SOFT NON TOXIC SILICONE - High quality SMOOTH soft silicone making them PLEASANT TO WEAR, NON TOXIC material so they are SAFE to use.
Orange silicone with blue cord (string), safe listening, enhanced music, up to 28dB Reduction. A compact and INEXPENSIVE way to reduce sound levels around you while still maintaining the ability to hear clearly. perfect for anyone who works in loud environments, attends parades, motor sports or athletic events; down to people who may want to study or sleep in peace.
These high-fidelity earplugs reduce sound by up to 28dB across all frequencies. By reducing sound evenly the earplugs reduce the risk of hearing dae but also keep music and speech clear and natural not muffled. The earplugs are configured to replicate the natural response of the ear canal so that sound comes through exactly as it should only quieter.
color: blue
Material: Silicone
Package Contents:
100 * pairs of earplugs
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

P1 is a Bluetooth vacuum & valve tube preamplifier and headphone amplifier. Headphone output is 160mW @32 ohm and is suitable for 32~300 ohm headphones and headsets.
Classic 6J5 vacuum & valve tube can provide warm retro tube sound. It can be replaced by 6J1, 6J4, GE5654, 6AK5, 6Ж1n-EB.
It supports Bluetooth/USB/RCA inputs from various devices like iPod, Phone, MP3, TV, Blu-ray players, Echo Dot, CD players, computer etc.
Bluetooth 5.0 supports APTX-HD lossless transmission. PC-USB supports 24bit 192KHz and is compatible with for Windows/Mac/Linux system
Treble & bass control can achieve different sound style. Bypass function can suspend the tone control circuit to achieve purer music experience.
Parameters
Chip Architecture: CM6642 QCC3034 NE5532 classic 47
PC-USB Input Sampling Frequency: 192K/24Bit
THD: 0.01% , SNR: 103dB
Bluetooth VER: 5.0
Headphone Max power output: 160mW 32 ohm load
Bass & Treble Range: ±6dB
RCA output level: 2.3V
Frequency Range: 20Hz-20kHz(±3dB)
Plug Type :EU Plug,it applies to Indonesia, Germany, France, Spain, Italy and so on.
Colour:Photo Color
Material:ABS
Size:18 x 11.8 x 3.6cm
Package Contents:
1 * Bluetooth Preamplifier
1 * Power Supply
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.