Elektronikus összetevők

1. Lightweight and portable, you can directly link the microphone to the Pocket 2 gimbal camera device Do-It-All Handle,
2.Clip on microphone for increasing recording distance;
3. With wide frequency response, and high-definition sound resolution,
4. The built-in clip can be easily fixed on the collar, convenient and practical. (This microphone does not need to be equipped with an audio head, only the Pocket 2 universal base can be used)
Colour:Black
Material:Metal plastic
Size:Cord length 165cm
Package Contents:
1 x Lavalier microphone
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

This product uses 6j1 tube to do pre-level lm1875 amplifier, with amp function. After 6j1 tube buffer, can significantly reduce the "digital taste" and "transistor sound", so that the whole sound system to bring a sweet natural "bile", the sound is more sweet, soft. Than the average lm3886, tda7294 better listen.
The pre-level is the use of 6J1 fever tube gall bladder before the class: imitation machine music fax X-10D circuit principle design, to be reasonable to optimize, more stable than the original machine performance, the tube to play increased by 10 percent. This machine uses dual AC 18v input, do not have to worry about looking for high voltage power supply The board comes with boost to enjoy you in the low power supply to enjoy the charm of high-voltage tube
Power works: a power supply, tube filament began to heat, then boost from the zero voltage began to boost, and other tube filament hot, the boost is just boost finished, so this is the same with the bile rectification, 4 470UF The capacitor filter is very clean, excellent power supply system will not have the exchange of sound, the filament is DC 12V power supply, the need for two tube filament is in series, the use of DC filament is also to reduce noise.
Before the output level automatically switch to promote the headset or push the rear lm1875 amplifier, that is, after inserting the headset, the amplifier without output, do not insert the headset, is to promote the amplifier output
The output of the sound slightly smaller than the digital sound source, thrust in general, if the friends can accept this way, but also the output of the product, Then you can try, after this product sound source processing, headset sound there will be a kind of sweet and delicate "bile." Headphone output function can also be used to do the output level, then the other after the amplifier.
Color: green
material: metal
After the class lm1875t amplifier: Europe and the United States LM1875T classic design! Wiring is reasonable! Outstanding performance! Have sought by DIY lovers! Store to retain all the original alignment, to retain the original performance of the premise, but also to strengthen the original components of the Oh, the introduction of 6j1 tube to promote the sound more sweet and beautiful!
Power supply voltage: the default dual AC 18v / current 3A, power 60w or more (the maximum voltage can not exceed the dual AC 19V, nor less than 18v, otherwise the tube point is not bright, the sound distortion. If you need to use AC 12v, need to modify the wire buck resistor For 2.2 Europe, then the amplifier output power will be slightly lower)
Amp / front output: nification about 0.8 times (amp function can try to use, you can promote the high sensitivity of the headset, thrust in general, the amp output can also be used to the current level of function, the output then drive the other amplifier, with tube taste. )
Lm1875t amplifier output power: typical 20W (maximum 30W)
Speaker impedance: 4Ω-8Ω
Total Harmonic Distortion: Less than 0.04%
Signal to noise ratio: 105dB
Frequency response: 14Hz-100kHz (by the RC high and low circuit count the maximum range of 3.29Hz-482.29kHz)
Package Contents:1 x lm1875t power amplifier board kit
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Brassiere shoulder strap, suitable for matching divers brassieres and underwear.
Adjustable and elastic design for comfortable wearing.
Easy to attach to the bra with the metal hook ends.

1. This common power DC protection board uses an optocoupler. Since the optocoupler has input and output isolation,
2. Electrical signal transmission has the characteristics of unidirectionality, so it has good electrical insulation and anti-interference ability.
3. Since the input end of the optocoupler belongs to the low-resistance type of current type operation, it has strong common mode suppression capability.
4. The power and sound source are separated, and the sound source will not be affected!
Note:
1. The protection board uses 1.6 thick 1A copper surface, double-sided tin plating process, the input voltage is DC12V-16V or AC 12-16V.
2. Turn on the power (red) indicator light, the work indicator light is normal, the relay is closed, if the impact protection board automatically adjusts the suction time (waiting for the current to pass through the relay)!
3. The power supply can be the same as the power amplifier. Each of the three channels of the audio source is independent. It is suitable for non-common ground and BTL circuit amplifiers.
4. The terminal block is 7.62 pitch, and the 1/2W metal film exceeds the standard. The internal resistance is reduced for high current design!
5. The ​relay ​as the core component is not afraid of contact sparking and oxidation, and lossless transmission of sound!
roduct description:
With delay and DC protection (default 1.8V control, DC sensitivity can be adjusted)
Protection board parameters:
Channel design: independent three channels
Can withstand power: power within 300W x 3
Material:PC Metal
colour:As shown
Package Contents:
1 * Speaker Protection Board
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Product Name: Wireless Bluetooth Speaker
Compatible Model: Universal
Type: Portable Speaker
Bluetooth version: V4.2
Battery: 1200mAh
Connectors: Aux, Micro-SD Card Slot, USB
Endurance time: 5 hours
Wireless Technology: FM
Wireless transmission distance: 10m
size:17.8x7.2x7.2cm
Material:ABS
colour:Black/Blue/Green/Red
Package Contents:
1 x Wireless Bluetooth Speaker
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Product Name: Wireless Bluetooth Speaker
Compatible Model: Universal
Type: Portable Speaker
Bluetooth version: V4.2
Battery: 1200mAh
Connectors: Aux, Micro-SD Card Slot, USB
Endurance time: 5 hours
Wireless Technology: FM
Wireless transmission distance: 10m
size:17.8x7.2x7.2cm
Material:ABS
colour:Black/Blue/Green/Red
Package Contents:
1 x Wireless Bluetooth Speaker
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Product Name: Wireless Bluetooth Speaker
Compatible Model: Universal
Type: Portable Speaker
Bluetooth version: V4.2
Battery: 1200mAh
Connectors: Aux, Micro-SD Card Slot, USB
Endurance time: 5 hours
Wireless Technology: FM
Wireless transmission distance: 10m
size:17.8x7.2x7.2cm
Material:ABS
colour:Black/Blue/Green/Red
Package Contents:
1 x Wireless Bluetooth Speaker
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Product Name: Wireless Bluetooth Speaker
Compatible Model: Universal
Type: Portable Speaker
Bluetooth version: V4.2
Battery: 1200mAh
Connectors: Aux, Micro-SD Card Slot, USB
Endurance time: 5 hours
Wireless Technology: FM
Wireless transmission distance: 10m
size:17.8x7.2x7.2cm
Material:ABS
colour:Black/Blue/Green/Red
Package Contents:
1 x Wireless Bluetooth Speaker
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Create an immersive surround experience to bring you into the action of your favorite games, movies, shows, and sports.
Front facing subwoofer pumps out deep bass you can hear and feel from your games, movies and music.
Speaker connects to music playback devices with 3.5mm AUX port, using power via USB port from computer, charging adapter.
Has volume control dial.
Gaming speakers designed for gamers.
Rated power: 2 x 5W
Frequency response: 150 hz-20 kHz
Sensitivity: 85dB /- 3dB
Impedance: 3x2
Horn size: 52mm
Light emitting: RGB LED
Connector: 3.5mm audio connector USB power supply connector
Power supply: DC 5V / 1A
Line length: 1.3m
Weight: 0.65kg
Colour: black
Material: ABS
Size: 11.7x7.8x18CM
Package Contents:
1 * Speaker
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Product name: Bluetooth tone pre-module
Product model: ZK-PT1
Bluetooth version: 5.0 (unobstructed, 10 meters)
Signal to noise ratio: greater than 90dB
Input method: 3.5mm audio input Bluetooth input
Output mode: AUX output (connect to active speakers and headphones)
Number of channels: left and right dual channels (stereo)
Adapter power supply: DC5-24V/1A or more
colour:Black
Material:plastic
size:67 x 68 x 21mm
Package Contents:
2 x Bluetooth tone pre-module
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Product Name : Cell Button Battery Socket Holder
Fit for : 1 x CR2032(Not Included Here)
Material : Plastic, Metal
Body Size : 24 x 15mm/ 0.9" x 0.5"(L*W)
Color : Brown
Battery is not included here.
Net Weight : 6g
Package Content : 6 Pcs x Cell Button Battery Socket Holder
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Get great sound on the move with this hi-fi amplifier, which is also a great option for connection to your home audio system or compatible device.
Power switch with LED display, triple acoustics pattern conversion, input and output wire and volume control.
Mini size easy to installation by DIY, especially good fit for car, motor bike ,computer speaker and other home audio DIY.
Type: Audio Amplifier
SNR: 90db
Frequency Response: 20-20khz
Degree of Distortion: 0.02(1khz)
Output Power: 500W x 2CH at 14.4VDC Input
Supply Voltage: 9-15VDC
Impedance: 4-16ohm
Size: 11cm x 8cm x 4cm/4.33inch x 3.15inch x 1.57inch (Approx.)
Compatible Audio & Video Equipment Style: Amplifier
Model Number: 27392
Weight: 259 g
color:Red
Material:Metal plastic
Package Contents:
1 x Stereo Audio Power Amplifier
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

360degrees stereo sound effect, realizing the stereo sound effect that fills the room, and providing 3D stereo surround sound effect.
Very suitable for use in the kitchen, dormitory, car, party, suitable for camping trips, travel, hiking, etc.
Bluetooth connection speed is fast, the signal is stable, compatible with all Bluetooth devices
Bluetooth control, you can turn on/off, play/pause, switch modes, skip songs, adjust volume, etc. through your mobile phone.
Colorful breathing light flashes with music
Connection method: Bluetooth connection
Frequency response range: 40Hz-20KHz
Output power: 3w
Bluetooth distance: 10 meters
Colour:black/blue/Red/Camouflage
Material:ABS
Size:19 x 9 x 8cm
Package Contents:
1 x sound box
1 x charging cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

360degrees stereo sound effect, realizing the stereo sound effect that fills the room, and providing 3D stereo surround sound effect.
Very suitable for use in the kitchen, dormitory, car, party, suitable for camping trips, travel, hiking, etc.
Bluetooth connection speed is fast, the signal is stable, compatible with all Bluetooth devices
Bluetooth control, you can turn on/off, play/pause, switch modes, skip songs, adjust volume, etc. through your mobile phone.
Colorful breathing light flashes with music
Connection method: Bluetooth connection
Frequency response range: 40Hz-20KHz
Output power: 3w
Bluetooth distance: 10 meters
Colour:black/blue/Red/Camouflage
Material:ABS
Size:19 x 9 x 8cm
Package Contents:
1 x sound box
1 x charging cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

360degrees stereo sound effect, realizing the stereo sound effect that fills the room, and providing 3D stereo surround sound effect.
Very suitable for use in the kitchen, dormitory, car, party, suitable for camping trips, travel, hiking, etc.
Bluetooth connection speed is fast, the signal is stable, compatible with all Bluetooth devices
Bluetooth control, you can turn on/off, play/pause, switch modes, skip songs, adjust volume, etc. through your mobile phone.
Colorful breathing light flashes with music
Connection method: Bluetooth connection
Frequency response range: 40Hz-20KHz
Output power: 3w
Bluetooth distance: 10 meters
Colour:black/blue/Red/Camouflage
Material:ABS
Size:19 x 9 x 8cm
Package Contents:
1 x sound box
1 x charging cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

360degrees stereo sound effect, realizing the stereo sound effect that fills the room, and providing 3D stereo surround sound effect.
Very suitable for use in the kitchen, dormitory, car, party, suitable for camping trips, travel, hiking, etc.
Bluetooth connection speed is fast, the signal is stable, compatible with all Bluetooth devices
Bluetooth control, you can turn on/off, play/pause, switch modes, skip songs, adjust volume, etc. through your mobile phone.
Colorful breathing light flashes with music
Connection method: Bluetooth connection
Frequency response range: 40Hz-20KHz
Output power: 3w
Bluetooth distance: 10 meters
Colour:black/blue/Red/Camouflage
Material:ABS
Size:19 x 9 x 8cm
Package Contents:
1 x sound box
1 x charging cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

[Wireless Karaoke Machine] Smartphone or iPad compatible with Android and iOS systems. Bluetooth connection, listening and singing, while watching the lyrics of the mobile phone. Strong signal, long connection distance and fast response. The Bluetooth pairing connection distance can reach up to 10 meters.
[Excellent stereo quality] Intelligent noise reduction technology suitable for handheld karaoke speakers to enhance 3D stereo sound quality and simulate high-end KTV experience. It is very suitable for singing or playing music and songs in KTV, family and friends gatherings, travel, private cars, life, etc. Enjoy your singing experience.
[Multifunctional microphone] This multifunctional microphone can enjoy cheerful singing. Support memory playback, fidelity sound quality, and record your songs. Karaoke machine with voice disguise, a super fun toy and learning tool, suitable for boys and girls.
[Fashion design] Fashionable and stylish metal appearance, intelligent tuning, reverberation sound effects enhance your confidence in singing. Small and portable, easy to carry the microphone. Enjoy joyful singing with this multifunctional microphone.
[Easy to Use] Multi-function buttons can adjust the Music, Echo, Volume and PA/R. Free to switch the previous and next song mode. Adjustable echo length effect can bring super surround with immersive enjoy. And the USB port allow you to plug USB and turn this magic piece to MP3 and play directly.
Colour:Black
Material:metal
Size:23.5x7.5x7.5cm
Package Contents:
1 * Microphone
1 * USB charging cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Use four-channel CMOS flow differential line receiver (driver).
Designed for applications requiring ultra-low power consumption and high data rates and design.
The device uses low voltage differential signaling (LVDS) technology that supports data rates exceeding 400Mbps (200MHz).
Note: HDMI-compatible to 12S receiver boards are not used for HDMI (such as Blu-ray players).
colour: as shown
Material: PCB metal
Package Contents:
1 x HDMI-compatible to I2S Receiver Board
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Bluetooth solution: JL5.0
Speaker: 3W
Battery: 3.7V 400mAh
Receiving distance: 10 meters (range depends on the environment)
Charging time: 2 hours
Playing time: 2-6 hours
Frequency response: 50HZ-20KHZ
Signal-to-noise ratio: greater or equal to 90db
Supported functions: Bluetooth/U disk/TF card/audio output
colour: pink/white/blue/black/green
Material: ABS
Size: 110x70x50mm
Package Contents:
1 x Bluetooth speaker
1 x USB charging cable
1 x Audio cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Bluetooth solution: JL5.0
Speaker: 3W
Battery: 3.7V 400mAh
Receiving distance: 10 meters (range depends on the environment)
Charging time: 2 hours
Playing time: 2-6 hours
Frequency response: 50HZ-20KHZ
Signal-to-noise ratio: greater or equal to 90db
Supported functions: Bluetooth/U disk/TF card/audio output
colour: pink/white/blue/black/green
Material: ABS
Size: 110x70x50mm
Package Contents:
1 x Bluetooth speaker
1 x USB charging cable
1 x Audio cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Bluetooth solution: JL5.0
Speaker: 3W
Battery: 3.7V 400mAh
Receiving distance: 10 meters (range depends on the environment)
Charging time: 2 hours
Playing time: 2-6 hours
Frequency response: 50HZ-20KHZ
Signal-to-noise ratio: greater or equal to 90db
Supported functions: Bluetooth/U disk/TF card/audio output
colour: pink/white/blue/black/green
Material: ABS
Size: 110x70x50mm
Package Contents:
1 x Bluetooth speaker
1 x USB charging cable
1 x Audio cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

1：Wide input voltage 3V ~ 32V
2：Wide Output Voltage 5V ~ 35V
3：Built- 4A efficient MOSFET switches enable efficiency up to 94%
4：high switching frequency of 400KHz, the ripple is smaller and smaller
5：Application:Car regulator , solar photovoltaic, wind power and other applications of voltage instability
Module Properties:Non- isolated boost (BOOST)
Rectification:Non- Synchronous Rectification
Conversion efficiency: Less than 94% ( greater the pressure , the lower the efficiency )
Switching frequency:400KHz
Output Ripple:50mV ( the higher the voltage , the greater the current , the greater the ripple )
Load Regulation: /- 0.5%
Voltage Regulation: /- 0.5%
Operating Temperature:-40 Celsius ~ 85 Celsius
Dimensions:48mm * 25mm * 14mm ( L * W * H )
Color: picture color
Material: copper foil substrate plate
Package Included:
1 x DC-DC Boost Buck adjustable step down Up Converter XL6009 Module Solar Voltage
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Material: High quality soft foam
External slide. Size about. 45mm
Earpad PX100 Koss Porta Pro Headphones
Soft, durable and highly elastic
The ear foam will improve the bass performance of your headphones.
This pair of ear cushions are made of soft foam, which makes your carry, cozy and comfortable.
So you can enjoy your stereo music in full. They are really good as a replacement for PX100 Koss Porta Pro headphones.
Color: black
Compatible with:
Sennheiser PX100 PC130, PC131, PX80 Kossporta Pro headphone
KOSS Porta Pro, Sporta Pro, KSC3550, KSC75 KSC55 Headphone
Delivery: 5 pairs of ear pads (L R)
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Connect to TT Lock APP, then you can remotely control your door lock anywhere in the world even if you are far away from home.Set, change, delete codes that you created anywhere anytime.You can also check door status, battery life and activity logs remotely in real-time.
Wireless connect to your home Wi-Fi router and wireless connect to your smart lock in Same Wifi network.
Wi-Fi gateway can pair as many locks as you want. The recommended distance between the gateway and the smart door lock is no more than 32 ft (10 meters).
Communication mode: bluetooth 4.0/Wifi
Support system: TT LOCK APP
Power supply: 220V
Working current: 200mA
size:about 70mmx70mmx26mm
Material:plastic
colour:White
Package Contents:
1 x Gateway
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Designed to charge all your AA, AAA Ni-MH / Ni-Cd (nickel-metal hydride / nickel-cadmium) rechargeable batteries
Convenience and easy charge with USB cable, you can charge wherever there is a USB jack, just connect with your desktop, notebook or cellphone adapter.
Provides 4 independent charging slots
With LCD, intuitive display the charging state, convenient to use
Intelligent computer chip to control the charging process
Over-current protection, Temperature protection, Short circuit protection, Advanced Intelligent microprocessor, which doles out the full charge to each battery while preventing overcharging
Specification:
Material: plastic
Color: White
Compatible: AA, AAA
Charging Cell Type: NiCd, Ni-MH
Rechargeable Battery Qty: 4
Input: DC 5V 2A
Output: 1.2V DC 2000mA – AA-2000mAx1, AA-1000mAx2, AA-500mAx3, AA-500mAx4, AAA-1000mAx1, AAA-500mAx2, AAA-250mAx3, AAA-250mAx4
Dimensions: 9.3*6.5*2.4cm
USB cable length: about 61cm
Note:
1.Don't charge 1.5V alkaline or carbon battery, otherwise will leak or cause explosion.
2.Do not mix charge different specifications or capacities batteries
3. Indoor use only.
4. The batteries are not included.
Package included:
1 x battery charger (Batteries not included)
1 x USB cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

All our products are brand new.External microphone with PTT button can be mounted anywhere. Transparent tube that connects the ear bud makes you look like a secret.Agent service or the security guard, and protects against radiation.Ear bud / speaker fits tight to the ear, which keeps your conversation private.
Compatible Models: for Alan Midland G5, G6, G7, G8, G9, G10, G12, M24, M48, M99, 445 Sport, 445 BT, ALAN 421, 441, 443, 451, 456R for MIDLAND Ocean and MIDLAND Atlantic / Alan 42, 75-501, 75-510, 75-785, 75-786, 75-810, 75-820, 72-822, 445BT, 70-440BP, 75-501, 75-785, 75-810, 80-125, 80-150, 80-400, 80-425, Alan 39, Alan 507, Alan 607, Alan 643, Alan 654, Alan 95 Plus, Atlantic-i, CT-22, G12, Nautico 1, Nautico 3, Ocean, Pacific, SP-410, SP-420, SP-430, SP-440
GXT Series: XT18, XT20, GXT255, GXT250, GXT400, GXT444, GXT450, GXT500, GXT300, GXT325, GXT550, GXT555, GXT565, GXT600, GXT635, GXT650, GXT656, GXT661, GXT700, GXT710, GXT735, GXT750, GXT771, GXT756, GXT757, GXT800, GXT808, GXT850, GXT881, GXT720, GXT775, GXT900, GXT1000, GXT1050, GXT950, GXT740, GXT785, GXT760, GXT795
LXT Series: LXT80, LXT110, LXT112, LXT114, LXT210, LXT216, LXT276, LXT310, LXT300, LXT303, LXT305, LXT315, LXT318, LXT319, LXT320, LXT322, LXT323, LXT324, LXT326, LXT328, LXT330, LXT335, LXT340, LXT345, LXT350, LXT360, LXT365, LXT376, LXT380, LXT385, LXT410, LXT420, LXT435, LXT440, LXT460, LXT480, LXT490
Other models: XT511, XT511MO, G-225, G-226, G-227, G-300, G-300M, for MIDLAND G7,for MIDLAND G12, for MIDLAND NAUTICO ALAN , for MIDLAND G8
colour: black
Material: ABS
Microphone:
Dimensions: 10 * 10 * 5 mm
Sensitivity: -38db /- 3db
Frequency: 1kHz
Resistance: 2.2 ohms
Cable length (Plug to PTT): about 95 cm.
Cable Length (PTT to Speaker): about 50 cm.
Telescopic transparent air duct (Speaker to earphone): about 32-40 cm
Speaker:
Diameter: 15mm
Resistance: 110 ohm
Sensitivity: 106 db /- 4db
Rated power: 0.5 W
Maximum power: 1 W
Package includes:
1 * Air Acoustic Tube Headset
1 * soft silicone earplugs
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Perfect for high noise level environments and discrete listening.
with Clear Acoustic Coil Tube Earbud Audio Kit For Two-Way Radios, Transceivers and Radio Speaker Mics Jacks
This earpiece also works with MP3 players, remote mics and other audio devices or accessories with 3.5mm earphone jack connector.
This surveillance headset is rugged design,with superb audio quality.
The reinforced earphone clip provides cable retention and eliminates strain on earphone.
Output Level: 72Db,
Rated Input Power: 0.1W,
Maximum Input Power: 0.2W,
Output Impedance: 32 ohms.
Works with the following devices:
Any MOTOROLA (CP200, CP200 XLS, GP300, EP450, PR400, HMN9030, PMMN4050, PMMN4059, PMMN4069, RLN4941)
Any KENWOOD (KMC-25, KMC-26, TK-208, TK-220, TK-240, TK-248, TK-250)
Any ICOM radio, Remote mic, and speak mic with a 3.5mm earphone jack.
colour: Black white
Material: metal
size: 0.8-2.5m
Package Contents:
1*Headset
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

In-ear monitor amplifier designed for personal monitor applications.
With dual XLR inputs, allow for 2-channel mono or stereo operation.
Switchable stereo/mono operation with mix function.
With VOLUME and BALANCE control knobs.
With 3.5mm headphones output, and integrated current limit protects your ears and headphones.
colour:black
Material:metal
size:Approximately 13 * 8.8 * 3.5cm
Package Contents:
1 * Headphones Amplifier
1 * use manual
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

1. 120 degree wide angle, no dead angle 120 degree illumination angle, uniform light diffusion, high-quality fill light and all-round illumination
2. Comes with a soft light board to make the light softer, and it will not hurt your eyes even if you shoot for a long time
3. Three levels of supplementary light adjustment, brightness can be adjusted according to shooting needs, one key operation can get the right light
4. 500MAH high-energy lithium battery, 100 minutes of endurance, using Micro-USB standard charging port, about 2 hours of full charge
5. Suitable for Vlog, live broadcast, photography, camera, mobile phone
Name: Portable small photography fill light
Charging time: about 120min
Maximum power: 3.5W
Number of lamp beads: 36
Luminous flux: more than 180lm (without diffuser), more than 145lm (with diffuser)
Color temperature: 5000k (without diffuser), 4500k (with diffuser)
Charging power supply: 5V0.5A
colour: black
Material: ABS
Size: 75x60x28mm
Package Contents:
1 x fill light
1 x lampshade
1 x base
1 x charging cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

360 Fahrenheitree rotation, safe and stable, no signal.
Built-in temperature protection, over current protection, over voltage protection, short circuit protection, foreign body detection.
Compatible with all mobile phones with wireless charging on the market.
Product Name: Mini Magnetic Bracket
Installation method: clip-on
Support power: 5W/7.5W/10/W15W
Colour: black
Material: ABS
Size: 7x6x6cm
Package Contents:
1 * Wireless Car Magnetic Charger
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Vinyl record player MM MC cartridge phono and playback board: With JRC2150BBE sound effect processing, high and low sound effect, improved clarity, and good dynamic effect.
Use the special amplifier chip of vinyl record player, the circuit is designed with frequency compensation circuit, the sound frequency band is more balanced, the input signal filter circuit has relatively lower noise, and the rectifier filter voltage stabilizer circuit is provided. (Note: The chip is polished, and the model is not required).
Versions: Amplifying board power transformer 2 lotus sockets with 300mm shielded wire
Working voltage: AC dual 10-17V
Board size: 85mm x 50mm
Overall height: about 23mm
Colour: as shown
Material: PC metal
Package Contents:
1 x Vinyl Record Player Board Kit
Note: The ground wire of the vinyl machine should be connected to the GND terminal of the power input end of the amplifier board. Or connect to the GND ground pad next to the phono input. If possible, you can connect it to the mains ground. Ungrounding may cause interference. The quality of the power supply determines the sound effect, and the power supply must be good. It is also possible to add an AC filter to the 220v input terminal for better effect.
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Product Name : Laptop Internal Speaker;Power : 2W
Resistance : 8 Ohm;Size : 36 x 15mm/ 1.4" x 0.6"(Dia*H)
Material : Electronic Parts, Metal
Weight : 58g
Accessories ONLY!
The laptop is not included here!
This is a non-product.
Package Content : 4 x Laptop Internal Speaker
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Broadband RF small power amplifier,suitable for all types of radio transmission,such as:short-wave FM wireless remote control,FM radio station transmission,amateur radio 135-175MHz,380-470MHz walkie-talkie and other launches.
The low-frequency input 2mW can output 2.5W maximum power,and the maximum output can be 2W at 500MHz.The maximum output can be 1.5W at 800MHz.The maximum output can be 1.0W at 1000MHz.The amplifier housing has a heat dissipation function and can work stably for a long time.
Color:silver
material:metal
Size about:82*71*25mm
Package Contents:
1 x RF Broadband Power Amplifier Power Amplifier(1-1000MHz 2.5W)
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Working voltage : DC 5-23V
Working current : 8MA(12V)
MODBUS RTU protocol,03 Read,06 Write.
Serial baud rate : 9600(default),N,8,1
By modifying the RS485 address, up to 247 module s can be connected (more than 16 US ether485 repeater)
Temperature and humi dity sensor is DHT12
The voltage conversion module is CE018,a High-efficiency and Low-heat voltage Converter
Typical application:
Indoor and outdoor temperature and humidity measurement
Temperature and humidity monitoring in vegetable garden
Weather forecasting, and monitoring
Temperature and Humidity Monitoring in Computer Room
Warehouse temperature and humidity monitoring
colour: green white
Material: Plastic
Package Contents:
1 x Temperature and humidity sensor
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

1. the use of advanced digital o signal processing (DSP) and FM modulation phase-locked loop (PLL) to make sound more realistic, more stable performance, long working hours without frequency offset
2. LCD display is more intuitive and accurate, with a very low power consumption and minimal noise, Can search for radio stations and store radio function, easy to operate
3. Built-in 30 digital volume adjustment button operation can be easily done, automatic power-down memory data before the power failure,speaker / headphone output automatic switching, quartz crystal frequency stabilization, the temperature change is no longer receiving frequency drift
4. The professional o DSP o signal analysis and processing, automatic mute no signal or weak FM signal noise floor of the big time, away from the traditional FM radio signal or the signal is weak in the absence of annoying when rustle, digital incremental rotary encoder to adjust the volume and frequency of use feel good, precise positioning, stable and durable, 360 ° rotation without dead ends
5.30-level digital volume adjustment range, Support for serial communication control, use other computer or device control MCU module with serial full functionality
Product parameters: Output power: 500mW (drive headphones), 3W x 2 (driving the speaker)
Frequency range: 50Hz-18KHz
Receiving frequency range:
Close the campus radio 87.0MHz-108.0MHz,
Open campus radio 76.0MHz-108.0MHz
Equivalent noise: greater than equal 30dB
Supply voltage: 3.0V-5.0V
Supply Current: maximum volume 1000mA, minimum volume at 60mA (for reference only)
Channel: Stereo
Material:Metal pc
colour:green
Package Contents:
1 * FM Radio Receiver Module
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Style: Tabletop
Transducer: Condenser Microphone
Use: Pro Studio
Set Type: Multi-Microphone Kits
Suit: Universal, live streaming/Instrument recording/on line meeting/self studio, Video Camera, Point & Shoot Cameras, DSLRs, Action Cameras, Special Camera, SMARTPHONES, Digital Cine Cameras, Mirrorless System Camera
Polar Patterns: Cardioid
Communication: Wired
Model Number: KIT-01LM
Type: Table Tripod
Max Extened Length (mm): 190mm
Folded Length (mm): 50mm
Lamp beads: 36LEDs Without battery
Remote control distance: 30ft
Tripod: Mini tripod, Flexible tripod
3 kinds of dimmable: Low, Medium and High
Screw interface: 1/4 Inch
Use equipment: For smartphone, DSLR,Mirrorless, camcorder, audio
Material:plastic
colour:black
Package Contents:
1 x Condenser Microphone
1 x Fill Light
1 x USB Cable
1 x Phone Holder
1 x Tabletob Stand
1 x Remote(Note: Random, don't accept the specified.)
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

The Mini Ball Head can rotating 360 degree, and the position of the monitor is adjustable as per your needs during shooting
[Easy to Install] It simply screws in, the ball head does not move when tightened, and can be installed on any 15-55mm round Rod / Pipe
The super clamp is universal that can fix onto any shaped body like cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars,motorcycle or bike handlebars etc.
using the lever principle, the Crab clamp can be installed on the cylindrical,plate and other irregular shape of the surface. The Opening and closing parts using the non-slip rubber, locking for opening with screw control, very steady and stable. Three 1/4 and one 3/8 standard screw holes are reserved on both sides of the pliers to install camera flash or other equipment for additional use.
colour:black silver
Material: Zinc alloy，metal
size: 55 mm
Package Contents:
1 x Large crab clip
1 x Mini Ball Head
2x Screws
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

1. T4 video light adopts the latest rotary encoder dimming technology, with accurate color temperature, stable light effect and no flicker.
2. Using 4 imported high-power LED lamp beads, the luminous flux can reach 1000 lumens. Equivalent to the brightness of a 100W bulb.
3. The design of constant current power supply ensures the consistency of luminous brightness. 90 degree wide-angle illumination and uniformity of light.
4. The lamp can achieve two color temperature modes of 5600K/3200K through the filter.
5. The compact design reduces the volume and size of the lamp, and is truly portable, energy-saving, bright and reliable
Light source: high color rendering lamp beads
Voltage: DC7-8.4V
Luminous flux: 1000 lumens
Power: 10.5W
Irradiation angle: 90 degrees
Color temperature: 5600K (white soft light film), 3200K (yellow soft light film)
Dimming: knob dimming 10% -100%
Battery: SONYF550/F750/F970 battery applicable
Colour:black
Material:ABS
Size: 8.8cm x 7.2cm x 5.5cm
Package Contents:
1 x Fill Light
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Description:
Product Name: 3.5mm Mic/o to Aux Adapter
Material:pvc
Color: black
Product Size: about 30cm
Weight: about 15g
Package Contents
1 x 3.5mm Mic/o to Aux Adapter
Features:
1. Gold-plated connection for better sound quality and less loss
2. Convert the 3.5 mm combo headphone/microphone port to two different ports
3. A 3.5 mm headphone jack and a 3.5 mm microphone port
4. Allow older o accessories to be used on newer computers
Designed for PC sound cards, portable CD players, etc.
5. The headphone splitter has a compact and rugged design that provides the perfect solution for applications that require portability.
And take up very little space in the laptop bag
Length: about 300 mm
Connector: 2 male 3.5mm to 1 female 3.5mm

1. For Android 10.0 Operating System: This TV box features the operating system for Android 10.0 to ensure that the box can run stably and smoothly to load movies, pictures and games can be loaded without buffer, and there is no need to wait for wonderful moments. The system for Android 10.0 improves the performance and usability standards through a smooth, lag-free interface, so the box is more stable.
2. 4GB RAM & 32GB ROM: The TV box provides ample space, 4GB RAM and 32GB ROM CPU bring you a quick start to your applications and games. You can download a large number of applications you need through this TV box.
3. Support 4K and 3D: This latest device for Android TV box supports decoding and playback of almost all popular audio and video formats, and you can enjoy 4K HD video. You can play thousands of games for Android on the 4K big screen and enjoy a higher quality experience with less buffer time. And this TV box supports 3D, so you can enjoy a visual feast.
4. Enjoy Your Home Theater: The store in this TV box supports many apps for Android. Just connect it with a high-definition TV and start streaming in a few minutes. With ultra-high-speed processor Wi-Fi, you can enjoy smooth and responsive performance.
5. Easy to Use: This TV box features built-in 2.4G Wi-Fi, and it supports 10/100M Ethernet LAN. We provide convenient connection and more stable WIFI signal to enjoy higher quality video experience. Just plug in, connect the HDMI-compatible cable and Wi-Fi/Ethernet in the box, and you can do whatever you want.
Specifications:
Memory DDR3: 4GB
Flash eMMC: 32GB
WiFi: IEEE 802.11 a / b / g / n; 2.4G
Operating system: for Android 10.0
Online chat: support for SKYPE video call, suitable for MSN, for Facebook, for Twitter, QQ, etc.
Other: Support e-mail, office suits, etc.
Support DLNA function
Support 2.4G wireless mouse/keyboard
Plug Type:US Plug,it applies to Canada, India,Mexico, Thailand, the United States, the Philippines,Taiwan and so on. / Plupport 2.4G wireless mouse/keyboard
Plug Type:US Plug,it applies to Canada, India,Mexico, Thailand, the United States, the Philippines,Taiwan and so on.
Colour: black
Material: ABS
Size: 105 x 105 x 20mm
Package Contents:
1 x TV box
1 x cable
1 x remote control
1 x US plug
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

1. Realize remote control on smart life APP through mobile phone network or WIFI.
2. Use with other Zigbee or WIFI devices to realize automatic scene applications.
3. Wireless connection indicator light.
4. Real-time display of temperature/humidity and low battery notification.
5. Use with Zigbee gateway.
Main parameters: Working voltage: 2.4V-3.3V
Working current: 5mA
Temperature range: -20°C~50°C
Temperature accuracy deviation: /- 0.3%
Humidity range: 0% ~100% RH (non-condensing)
Humidity accuracy deviation: /- 0.3%
WIFI frequency: WiFi 2.4GHz
WiFi standard: IEEE 802.11 b/g/n
Standby current: less than 3uA
System support: IOS/Android
App name: Smart Life/Tuya Smart
Wireless protocol: Zigbee 3.0
Battery type: Lithium battery (CR2032)
Working temperature: -20~50℃
Working humidity: 0% -100% RH (non-condensing)
Transmission distance: 10~30 meters
Colour: white
Material: ABS
Package Contents:
1 x Smart Temperature Humidity Sensor
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Application: Computer
Condition: New
Dissipation Power: 5v
Model Number: Micro-SD Shield for WeMos
Type: Voltage Regulator
Supply Voltage: Voltage Regulator
colour: Photo Color
Material: PC metal
Package Contents:
1 * SD Card Module
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

1. SW/AM/FM Radio: The best way to listen to your favorite FM & AM & SWradio stations on the go
2. Compact Portable Radio: Small handheld portable size, radio fits in your pocket
3. Battery Powered: Requires 2AA Batteries (not included) Battery operated radio, lasts over 800 hours. Great for indoor, outdoor or emergency
4. High Quality Speaker: Built-in speakers deliver fine sound allows you to enjoy AM FM SW radio
5. Long Range Transistor Radio: Long-distance reception radio keeps you listening almost anywhere. Even in emergency
Frequency Range:
MW: 530-1600KHZ
FM: 76-108MHZ
SW: 15.95-6.20MHZ
SW2: 7.10-7.30MHZ
SW3: 9.50-9.90MHZ
SW4: 11.65-12.05MHZ
SW5: 13.60-13.80MHZ
SW6: 15.10-15.60MHZ
SW7: 17.50-17.90MHZ
frequency:
MW less than or equal to 3mv/m
FM less than or equal to 3μV
SW greater or equal to 60uv
AM S/N greater or equal to 34db
Speaker: d57mm/8 ohm/0.5W
Voltage: DC 3V
Battery: 2 AA1.5V batteries
External power supply: 3V 300MA
Output power: greater or equal to 100mW
Colour: Black / Silver
Material: ABS
Size: 130 x 78 x 29mm
Package Contents:
1 x radio
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

1. SW/AM/FM Radio: The best way to listen to your favorite FM & AM & SWradio stations on the go
2. Compact Portable Radio: Small handheld portable size, radio fits in your pocket
3. Battery Powered: Requires 2AA Batteries (not included) Battery operated radio, lasts over 800 hours. Great for indoor, outdoor or emergency
4. High Quality Speaker: Built-in speakers deliver fine sound allows you to enjoy AM FM SW radio
5. Long Range Transistor Radio: Long-distance reception radio keeps you listening almost anywhere. Even in emergency
Frequency Range:
MW: 530-1600KHZ
FM: 76-108MHZ
SW: 15.95-6.20MHZ
SW2: 7.10-7.30MHZ
SW3: 9.50-9.90MHZ
SW4: 11.65-12.05MHZ
SW5: 13.60-13.80MHZ
SW6: 15.10-15.60MHZ
SW7: 17.50-17.90MHZ
frequency:
MW less than or equal to 3mv/m
FM less than or equal to 3μV
SW greater or equal to 60uv
AM S/N greater or equal to 34db
Speaker: d57mm/8 ohm/0.5W
Voltage: DC 3V
Battery: 2 AA1.5V batteries
External power supply: 3V 300MA
Output power: greater or equal to 100mW
Colour: Black / Silver
Material: ABS
Size: 130 x 78 x 29mm
Package Contents:
1 x radio
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Material: PCB
Use for 1-8S Lipo / Li-ion / Li-Mn / Li-Fe
Voltage detection precision: /- 0.01V
Unit voltage display range.
0.5 ~ 4.5V voltage range display Total: 0.5 ~ 36V
1 S test mode voltage range: 3.7 ~ 30V
Mode low alarm voltage for the 2-8 S
Alarm set value range: OFF ~ 2.7 ~ 3.8V
Size: 39mm x 24mm x 9mm
for 1 cell 3.7V and 8 cells LiPo 29.6V.
The original alarm voltage is 3.3 v, the min.
voltage can be adjusted with the knob.
The sounds of alarm and red light to alert you when the battery voltage is too low.
It can prevent your lipo battery damage due to low voltage.
Package include: 1 x Low voltage alarm
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3 cm.

Replacement charging cable for Fit-bit Blaze smart watch.
Very convenient to charge your Blaze in office, at home, in car or on travel.
Output short circuit protection; Over voltage overload filter protection.
You can connect with the power adapter, car adapter, power bank, laptop and so on, those charging method can provide high efficiency and high stability charging.
Note: in order to prolong the battery life of your bracelet, it is strictly forbidden to plug in the charging head of the mobile phone to charge. Please connect the bracelet to the charging cable and plug it into the USB port of the computer or notebook to obtain power.
colour:Black
Material:plastic
size:Cable length about 1m
Package Contents:
1 x Charger Dock
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

1. Simple design, exquisite and compact, pursuing a lighter and smaller design to make it more portable
2. Support the wireless same screen of TV, display and projector with HDMI interface,
3. Support 1080P high-definition picture quality, clearly show every detail.
4. The connection method has stable signal without delay, and solves the stuck problem of the wireless same screen
5. Connect the device, plug and play, no need to wait
Model: G12
Wireless transmission equipment model: wireless with screen device
Memory: DDR1Gbit
CPU: AM8268X
Power: 5V 2A
colour:Black
Material:ABS
size:58 x 58mm
Package Contents:
1 x wireless projector
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

[Newest PUSH-RF Technology & Battery-Free]Our self-Powered wireless doorbell,no wires or batteries required. When the transmitter is pressed, it generates electric power itself and sends a stable signal to receiver. Never worry about damaging the wall or doorbell during battery replacement again! It can reach up to 150,000 Clicks, 20 year maximum lifespan!Dustproof and waterproof, working temperature ranges from -4 °F-140 °F, withstands various harsh weather conditions.
[38 Chimes & 4 Volume Levels]Our wireless doorbell use stereo speaker delivers rich and crisp sound.Our wireless doorbell offers a wide selection of 36 chimes and 4 adjustable volume levels (include mute mode) for your personal taste.Long press the volume button to return to the first chimes(Dingdong).With memory function ,the wireless doorbell remembers your last settings after a power outage,don't need to adjust it every time, save more energy and time.
[NO Crosstalk & NO False Alarms]Our doorbell has strong penetrating power and anti-interference.Multiple obstacle area is up to 500ft(152M), up to 1000ft (305M) in open areas. Our doorbell will not interfere with other equipment in your home or those of your neighbors and ensures you will never miss a visitor, even if you are a few rooms away or on another floor. Flashing light with audio alert indicators which is easy for people including the hearing impaired to notice.
[Easy To Install]Just plug the mini receiver into a socket and fix the transmitter on a wall with the accessories provided,including 2 screws and a piece of double-sided bonding tape.Our doorring is suitable for home, apartment, school, villas, office, dog potty communication doorbell and more. This no battery required wireless doorring makes a fine holiday present, birthday gift, or anniversary gift for any home or business owner.
Plug Type:US Plug,it applies to Canada, India, Japan, Mexico, Thailand,Taiwan, the United States, the Philippines and so on.
size: 6.6*6cm
Material:ABS
colour:white
Package Contents:
1 * Transmitter (no battery request)
1 * Plug-in receivers
1 * User manual
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Frequency Characteristics: Rated power: 3 (W); Rated impedance: 4 ohms (Î); Frequency response: 500-20K (kHz).
for Mini Arduino Speaker: Single Micro-Type mobile speaker with 11mm line length JST-PH2.0mm-2 pin terminal.
Applications: for A rduino, robot, raspberry pi, advertising machine, game machine. Integrated Machine Special Speaker.
Material:plastic
colour:black
Package Contents:
2 * 3 watt 4 ohm Mini Speaker
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

1. Good Compatibility: This silicone protective cover is designed for HomePod mini speaker.
2. Perfectly Fit: It is easy to install and perfectly fits and match your smart speaker.
3. Provide Better Protection: This protective case is designed to protect your speaker from dropping and scratches while not in your carry storage case.
4. Premium Material: The case is made of high-quality material, featured by good flexibility, tear resistance, and it is washable.
Name: Silicone Case for Bluetooth Speaker
Compatible model: compatible for HomePod mini
Weight: about 40g
Thickness: about 1.8mm/0.07inch
colour:Black / Blue / Red / Green
Material:Silica gel
Package Contents:
1 x Case For HomePod mini
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.