Üzleti, irodai és ipari

ESP8266 ESP-01 ESP-01S DS18B20 Temperature Humidity Sensor Module esp8266 Wifi NodeMCU Smart Home IOT DIY Kit
 

TTP223 Capacitive Touch Sensor Switch Digital Touch Module

A4950 Dual Motor Drive Module Performance Super TB6612 DC Brushed Motor Driver Board
Module parameters:
Function: It can control the positive and negative rotation of 2 motors (such as balancing the car, only one module is needed)
Voltage: 7.6~40V
Current: Module with current limit protection, 2A (overcurrent will not be powered off, only limit the maximum output current)
Control: 4 PWM pins are required. (If you do not need to reverse, only 2 PWM pins are needed.) It is much simpler to use than the L298 and provides instructions for use.
 
Weight: 3g
Size: 23*18.3mm
Lead 2 rows of 7Pin pin headers with a pitch of 20mm
 
Shipping list:
Dual motor drive module (welded pin header) 1

 
 
USB Volt Current Voltage Charger Capacity Tester Shell Case TEST Power Meter
Features:
100% Brand New.
Size (L x W x H): 68mm x 23mm x 12mm (26.5" x 9" x 4.7")
Measuring range: 4-9V
Current: 0-3.3A
Input voltage: 3.5-9V
Battery capacity: 0-99999mAh
Working time: 0-99H
Working hours and power capacity memory function after power off
Model number: USB
Precision: plus or minus 1%
Package Content: Ammeter Voltage Charger USB Detector Tester
Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures. Thank you!
 

The power amplifier circuit board designed using the official standard, the chip uses a selection of US imports original Longding micro Class D amplifier chip. Good product chip is necessary and the majority of music lovers to share, this is our consistent philosophy! The amplifier with ultra-high efficiency, large power, in the case of 12V power supply can output 10W 10W of power, the chip without fins, but also with overheating, over-current protection function, the function can be said to be very powerful.
 
The amplifier board is still difficult to drive two 15W speakers, high efficiency Class D amplifier board pure is not blown out, the most suitable for small rooms listening to music use.
You need to use a large heat sink when using Spike TDA2030 amplifier chip board, TDA2030 (15W 15W) This traditional 15W amplifier board to drive two speakers, and high-efficiency Class D PAM8410 pure amplifier board need only drive two 15W speakers Use a small heat sink, high efficiency super power, the sound quality is great.
 
Modification:
 
1. Analog Microelectronics America's original PAM8610 chip as amplifier chip, power can reach 10W 10W.
 
2. As pure class D amplifier board power requirements is relatively high, the exclusive use of the power amplifier board enthusiast 2200UF capacitor filter, the elimination of exchange voice, without interference, pure sound quality.
 
3. Using automatic placement machine production, the board is more beautiful.
 
4. Strip 5.5X2.5 standard power outlet, power input is very convenient. (Positive outside and negative inside)
 
Recently found to have bad business to buy this product to copy, workmanship, PCB design, and capacitor materials are not as ours, we have absolute import original IC, coupled with excellent PCB design and machine placement soldering, stable and reliable performance.
Pure Class D chip without fins can open detonation music, and now we have to chip plus a heat sink, you do not have to worry about overheating. !
 
Overview:
When the power supply voltage of DC 8V-12V, PAM8610 be able to 4Ω load 10W 10W output power, high-quality sound.
 
 
Technical Parameters:
Power: typically 10W
Voltage: DC DC8V-12V
Can drive speakers: 10W-15W, 4 -8 Euro Euro
 
Built-in power-impact sound canceling circuit, no power on impact sound
 
 
Physical picture:
 
 
 
 Compact board, 3.5MM stereo audio input interface, audio input with a standard easy. With fully enclosed volume control potentiometer, can be arbitrary adjust the volume, use and installation are very flexible and convenient
 
 
 
Use American Power Analog Microelectronics original PAM8610 pure Class D amplifier chip as the power amplifier IC, the maximum it can provide to 10W 10W of power, incredible sound.
 
PCB component placement tidy line with US FCC standards, all using genuine components using devices capable of long-term stability.
 
 
Heart-highlight fine arts star Electronic Manufacturing insist that only new element was the market mature products, please rest assured purchase.
 
 
 
 
 
Use enthusiast 2200UF capacitor, ensure pure sound quality.
 
Board size: Long 40mmX (excluding protruding parts of the volume potentiometer, etc.) wide by 19 40mmX
 
 
 
 
 
 
 
 Subjective sound experience:
 
     PAM8610 (10W) power to the PAM8406 (6W) bigger, more powerful speaker can drive, found this amplifier board can drive two 25W speakers.
Listen really surprised, it is hard to believe that such a small piece of the chip can be issued so great volume, stereo effect is very good, indicating a high degree of chip channel separation. Case of playing music, the performance was better than expected, chip minimal heat, the sound was amazing, more transparent treble, bass, or a certain amount, quality count in a small amplifier board in the upper level, listen to music from a very comfortable .
 
 
-------------------------------------------------- --------------------------------------------------
 
Precautions:
1: Power supply voltage can not exceed 12V
2: 4 speaker wire connection is completely independent, does not allow total access!
 
Just one of the cases appear immediately burn IC

Product Description
SMD chip componentstestfoldertechnologyparameters:
Leadlength: 400mm,griplength: 145mm,probelength: 5mm
Maximumclampopening: 10mm
Suitable forSMD resistors, capacitors, ICtest
One-handed operation,convenient and practical

AT-05 BLE Bluetooth 4.0 Uart Transceiver Module CC2541 Central Switching compatible HM-10

DC Power Shield V1.1.0 for WEMOS D1 mini
 

Specifications
Compatibility: USB v2.0 standard
Interface: Network:USB
Serial:RS-485
Port: One Independent RS-485
Connector: Network: USB-type A connector
Serial: Screw terminal
Transmission speed: 600bps to 115.2Kbps
Parity bit: odd, even, none
Data bit: 5, 6, 7, 8
Stop bit: 1, 1.5, 2
Driver Support: Windows 2000/2003/XP/Vista/7 (32bit and 64bit)
Power Consumption: 1.5W @ 5V
Max. Distance: 4000ft (1200m) @ 19.2Kbps
Case: Blue transparent ABS
Operating Temperature: -20°~ 65°
Operating Humidity: 20% to 95% (non-condensing)
Overview
USB To RS485 converter allows PC users to connect their RS-485 devices
to systems that use USB interface. By attaching the converter to a PC, it will no longer be
necessary to open the chassis or turn off the PC to install the hub. With the converter,
the user instantly gets one extra high-speed RS-485 ports. In addition, since
the power is derived from the USB port, there are not any cumbersome power adapters.
This makes the converter especially suitable for PLCs, printers, POS system and industrial
control devices.

10PCS/LOT Nano 3.0 controller compatible for nano NO CABLE   it you need you can ask us to send to you 
 
 
 
 
 
 
 

10PCS/LOT Nano 3.0 controller compatible for nano NO CABLE   it you need you can ask us to send to you 
 
 
 
 
 
 
 

10PCS/LOT Nano 3.0 controller compatible for nano NO CABLE   it you need you can ask us to send to you 
 
 
 
 
 
 
 

10PCS/LOT Nano 3.0 controller compatible for nano NO CABLE   it you need you can ask us to send to you 
 
 
 
 
 
 
 

10PCS/LOT Nano 3.0 controller compatible for nano NO CABLE   it you need you can ask us to send to you 
 
 
 
 
 
 
 

10PCS/LOT Nano 3.0 controller compatible for nano NO CABLE   it you need you can ask us to send to you 
 
 
 
 
 
 
 

10Pcs/lot Hot NTC Thermistor Temperature Sensor Waterproof Probe Wire 10K 1% 3950 W1209 W1401 cable

 
 
 
 
 
 

Product Description
FEATURES :
1. Support 1.5V,1.8V,2.5V,3.5V and 5.0V.
2. Support all ALTERA products : CPLD ( MAX3000, MAX7000, MAX9000 and MAX II ) ; FPGA ( Stratix, StratixII, Cyclone, CycloneII, ACEX 1K, APEX20K and FLEX 10K ) ;Active serial configuration device (EPCS1, EPCS4, EPCS16)
---- Now we have tested chip using this tool is: Cyclone (EP1C3, EP1C6, EP1C12, EP1C20) ; Cyclone II (EP2C5, EP2C8, EP2C35) ; Stratix (EP1S10, EP1S20, EP1S25) ; Stratix II(EP2S60) ; FLEX10K(EPF10K10, EPF0K30) ; ACEX1K(EP1K30) ; MAX7000(MAX7128SLC84, MAX7128) ; AETC100(MAX3000, MAX3128) ; MAXII(MAXII240, MAXII570, MAXII1270) ; EPCS(EPCS1, EPCS4, EPCS16) ; EPC(EPC1, EPC4)
3. Support AS, PS and JTAG program ( with Verify and BankCheck function) .
---- When we tested the chip above , we use the different program mode: JTAG ( Cyclone, CycloneII, Stratix II, Flex10K, Acex1K, Max7000 and Max3000) ; AS ( EPCS1, EPCS4, EPCS16 ) ; PS ( Stratix , Stratix GX )
4. Support embedded logic analyzer function of SignalTapII
5. Support NIOS II communication and debugger -- When you use it to debug your Black Gold , it will not Pop-up warning
6. Faster -- about 6 times than ByteblasterII
7. USB interface ! -- you don't need a PC with serial port now
8. 100% compatible with Official ALTERA USB Blaster
Packing List
1, USB cable one
2,10 core JTAG data line 1
3, USB-Blaster driver installation instructions
 

Feature:
1. square board USB interface for connection stability
2. Use of imported high-performance USB controller chip
3. Using genuine Songle relay
4. military grade PCB board production
5. PCB size: 56.5mm * 24.9mm
6. mounting holes Size:. 3mm, fixing holes central moment: 52.2mm * 20.6mm
Product parameters:
1. 5V relay, the relay can control the maximum 250V, 10A AC load and 30V, 10A DC load
2. control terminals connected mode: NC / COM / NO.
 
Package included:
1 x USB 1 Channel 5V Relay Module /Computer Control Switch

 
Tracking info of  China Post Ordinary Small Packet Plus can be check here : www.17track.net/en 
 

 
Tracking info of  China Post Ordinary Small Packet Plus can be check here : www.17track.net/en 
 
 
This package including gear, rack, pulley and belt drive a total of 75 parts, photo as the photo. Many parts are our own design and production, other places can\'t buy accessories variety is complete, the experiment is scientific research, popular science activities, personal diy models such as the necessary machinery accessories,
75 kinds of gear package, It can be used whether model, toys, cars, planes, remote control toys. This package including gear, rack, pulley and belt drive a total of 75 parts
 
The package including :
9 kind of Spindle gear
11 kind of Crown gear
12 kind of Single gear
19 kind of Double gear
7 kind of Belt pulley
2 kind of Worm gear
5 kind of Belt
2 PCS Connect rack
6 PCS Axle sleeve
1 PC Tee Axle Sleeve
1 PC Bevel gear

 

DHT Pro Shield for D1 mini DHT22 Single-bus digital temperature and humidity sensor module sensor
 
Technical specs:
Temperature: -40~80°C (±0.5°C)
Humidity: 0-99.9% RH (±2% RH)
Shipping list:
1.Long female pins x2pcs
2.Short female pins x2pcs
3.Normal pins x2pcs
4.DHT Pro Shield  x1pcs
 
 

Module Description
1.     provide5Vwith3.3VVoltage Output
2.     USBturnUART(Serial data,ISPWay program download,STC / STMMCU)
Ø  Serial Data Communication (50bps ~ 2Mbps, Conventional non configurable baud rate)
Ø  ISPWay program download (STC / STMMCU)
3.     USBturnIIC / I2C(flashchip,IICDevice operation, brush)
Ø  Only doMaster.20K,100K,400K,750KMore communication rate adjustable
4.     haveledLamp Status display
5.     Function, the switching voltage terminal
 
Information on
 
Ø  Driver Information
Ø  Documentation
Ø  Tools Data
Ø  APIInterface Library
Ø  Labviewdata
 Driver Support
Ø  Windowssystem(Windows XP,W7,W8,W10)
Ø  Androidsystem
Ø  Linuxsystem
Ø  Macsystem
 
Shipping list
CH341T ComboMulti-function module*1
Dupont line dual female* 4
Anti-static bag*1
Shorting terminal*2

AC/DC 12V TDA7297 2x15W Digital Audio Amplifier DIY Kit Dual-Channel Module
 

 
Tracking info of  China Post Ordinary Small Packet Plus can be check here : www.17track.net/en 
 
 
Configured package, play basically do not need to go out and buy a sporadic electronic materials.
Item Name Value Quantity
1 Carbon Film Resistors plug 100R 30
2 Carbon Film Resistors plug 1K 30
3 Carbon Film Resistors plug 4.7K 30
4 Carbon Film Resistors plug 10K 30
5 Carbon Film Resistors plug 47K 30
6 Carbon Film Resistors plug 100K 30
7 Carbon Film Resistors plug 1M 30
8 The associated potentiometer (Short) handle length of 3 feet 15MM feet 2.54 or 5.08 10K 2
9 The associated potentiometer (Short) handle length of 3 feet 15MM feet 2.54 or 5.09 100K 2
10 Straw hat type LED plug-F5 white hair green long legs Green 3
11 Strawhat LED plug-F5 white hair red long legs Red 3
12 Straw hat the LED plug F5 white hair yellow long-legged Yellow 3
13 Long legs white hair and white straw hat type LED plug-F5 White 3
14 12 * 12 tact switch switch body   6
15 12 * 12 tact switch key cap - blue circle   3
16 12 * 12 tact switch key cap - red circle   3
17 12 * 12 tact switch key cap - white round   3
18 12 * 12 tact switch key cap - white square   3
19 12 * 12 tact switch key cap - green square   3
20 1 * 40 single pin 2.54 pitch gilded   2
 
 
 
 
 
 
.

 
Description:
 
 
This board works with the PICkit Serial Analyzer.
This boad allows the user to measure the unknown input voltage with a minimum amount of preparation.
Write and read the MCP3421 configuration register bits using the PICkit Serial Analyzer.
Read the ADC conversion results using the PICkit Serial Analyzer.
Many test pads including the SCL and SDA allow to monitor the I2C signals data comunications.
The user can connect the SDA and SCL pins to their own PCB board and evaluate the MCP3421 device performance.

 
 
2262/2272 Four Ways Wireless Remote Control Kit,M4 the lock Receiver with 4 Keys Wireless Remote Control
 
 
 

NEW! 10PCS/LOT 2/3/4/6/8 PIN 20cm jumper wire/dupont cable breadboard

NEW! 10PCS/LOT 2/3/4/6/8 PIN 20cm jumper wire/dupont cable breadboard

NEW! 10PCS/LOT 2/3/4/6/8 PIN 20cm jumper wire/dupont cable breadboard

NEW! 10PCS/LOT 2/3/4/6/8 PIN 20cm jumper wire/dupont cable breadboard

NEW! 10PCS/LOT 2/3/4/6/8 PIN 20cm jumper wire/dupont cable breadboard

 
Tracking info of  China Post Ordinary Small Packet Plus can be check here : www.17track.net/en 

1.Features
 
SIZE 0.96inch 
Display Mode Normally black IPS
Display Format Graphic 80RGB*160 Dot-matrix
Input Data SPI interface
Drive IC ST7735S
Dimensional outline 24(W)*30 (H)*2.8 /-0.1(T)mm
Resolution 80RGB*160 Dots
LCD Active area 10.8 (W)*21.7 (H)
Dot pitch 0.135(H) x 0.1356(V) mm
Viewing Direction All View
Operating Temperature -2070°C
 
 
2.Pin Descriptions:
 
PIN No Symbol Description
1 GND Ground
2 VCC Power 3.3V
3 SCL Serial clock pin.
4 SDA Serial data input
5 RES LCM Reset pin
This pin is reset signal input. When the pin is low, initialization of the chip is
executed. Keep this pin pull high during normal operation.
6 DC Data/Command Control
7 CS Chip Select
8 BLK Backlight control pin
1.Features
 
SIZE 1.3inch 
Display Mode Normally black IPS
Display Format Graphic 240RGB*240 Dot-matrix
Input Data SPI interface
Drive IC ST7789VW
Dimensional outline 27.78(W)*39.22 (H)*3.0 /-0.1(T)mm
Resolution 240RGB*240 Dots
LCD Active area 23.4 (W)*23.4 (H)
Dot pitch 0.0975(H) x 0.0975(V) mm
Viewing Direction All View
Operating Temperature -2070°C
 
 
2.Pin Descriptions:
 
PIN No Symbol Description
1 GND Ground
2 VCC Power 3.3V
3 SCL Serial clock pin.
4 SDA Serial data input
5 RES LCM Reset pin
This pin is reset signal input. When the pin is low, initialization of the chip is
executed. Keep this pin pull high during normal operation.
6 DC Data/Command Control
7 BLK Backlight control pin

1.Features
 
SIZE 0.96inch 
Display Mode Normally black IPS
Display Format Graphic 80RGB*160 Dot-matrix
Input Data SPI interface
Drive IC ST7735S
Dimensional outline 24(W)*30 (H)*2.8 /-0.1(T)mm
Resolution 80RGB*160 Dots
LCD Active area 10.8 (W)*21.7 (H)
Dot pitch 0.135(H) x 0.1356(V) mm
Viewing Direction All View
Operating Temperature -2070°C
 
 
2.Pin Descriptions:
 
PIN No Symbol Description
1 GND Ground
2 VCC Power 3.3V
3 SCL Serial clock pin.
4 SDA Serial data input
5 RES LCM Reset pin
This pin is reset signal input. When the pin is low, initialization of the chip is
executed. Keep this pin pull high during normal operation.
6 DC Data/Command Control
7 CS Chip Select
8 BLK Backlight control pin
1.Features
 
SIZE 1.3inch 
Display Mode Normally black IPS
Display Format Graphic 240RGB*240 Dot-matrix
Input Data SPI interface
Drive IC ST7789VW
Dimensional outline 27.78(W)*39.22 (H)*3.0 /-0.1(T)mm
Resolution 240RGB*240 Dots
LCD Active area 23.4 (W)*23.4 (H)
Dot pitch 0.0975(H) x 0.0975(V) mm
Viewing Direction All View
Operating Temperature -2070°C
 
 
2.Pin Descriptions:
 
PIN No Symbol Description
1 GND Ground
2 VCC Power 3.3V
3 SCL Serial clock pin.
4 SDA Serial data input
5 RES LCM Reset pin
This pin is reset signal input. When the pin is low, initialization of the chip is
executed. Keep this pin pull high during normal operation.
6 DC Data/Command Control
7 BLK Backlight control pin

750 SC16IS750 Single UART With I2C-Bus/SPI Interface For Industrial Control

MB102:
MB-102 quality bread board circuit board breadboard board universal board 165 × 55 × 10mm
 
One terminal strip: 630 jacks
 
Weight 89g / month
 
Two distribution strips: 200 jacks
Product dimensions: 5.6x16.5x0.85 (cm)
 
Phosphor bronze nickel-plated spring clip
 
Matching jumper, wire diameter 0.8mm
 
Plastic parts: ABS
 
Use: experiment, test
 
Features: recyclable, environmentally friendly recycling
           The structure is clear and easy to use
 
Breadboard dedicated power supply module:
       
    The breadboard can be assembled in fixed units
Breadboard dedicated power supply module, compatible with 5V, 3.3V
  Applicable to MB102 breadboard
  Input voltage: 6.5-12V (DC) or USB powered
  Output voltage: 3.3V, 5V switchable
  Maximum output current: <700ma
  Up and down two independent control, can switch to 0V, 3.3V, 5V
  Onboard two 3.3V, 5V DC output pins
65 Root Breadboard Cables:
Weight: about 35g
 
Bread line / breadboard line Bread board connection cable Bundle board line tie a tie 65 (there may be 1-2 of the error, please do not care about)
 
The total length of 65 test lines are:
 
24CM (with needle part) 4 root
 
20CM (with needle part) 4 root
 
16CM (with needle part) 8 root
 
12CM (with needle part) 49 root

MB102:
MB-102 quality bread board circuit board breadboard board universal board 165 × 55 × 10mm
 
One terminal strip: 630 jacks
 
Weight 89g / month
 
Two distribution strips: 200 jacks
Product dimensions: 5.6x16.5x0.85 (cm)
 
Phosphor bronze nickel-plated spring clip
 
Matching jumper, wire diameter 0.8mm
 
Plastic parts: ABS
 
Use: experiment, test
 
Features: recyclable, environmentally friendly recycling
           The structure is clear and easy to use
 
Breadboard dedicated power supply module:
       
    The breadboard can be assembled in fixed units
Breadboard dedicated power supply module, compatible with 5V, 3.3V
  Applicable to MB102 breadboard
  Input voltage: 6.5-12V (DC) or USB powered
  Output voltage: 3.3V, 5V switchable
  Maximum output current: <700ma
  Up and down two independent control, can switch to 0V, 3.3V, 5V
  Onboard two 3.3V, 5V DC output pins
65 Root Breadboard Cables:
Weight: about 35g
 
Bread line / breadboard line Bread board connection cable Bundle board line tie a tie 65 (there may be 1-2 of the error, please do not care about)
 
The total length of 65 test lines are:
 
24CM (with needle part) 4 root
 
20CM (with needle part) 4 root
 
16CM (with needle part) 8 root
 
12CM (with needle part) 49 root

MB102:
MB-102 quality bread board circuit board breadboard board universal board 165 × 55 × 10mm
 
One terminal strip: 630 jacks
 
Weight 89g / month
 
Two distribution strips: 200 jacks
Product dimensions: 5.6x16.5x0.85 (cm)
 
Phosphor bronze nickel-plated spring clip
 
Matching jumper, wire diameter 0.8mm
 
Plastic parts: ABS
 
Use: experiment, test
 
Features: recyclable, environmentally friendly recycling
           The structure is clear and easy to use
 
Breadboard dedicated power supply module:
       
    The breadboard can be assembled in fixed units
Breadboard dedicated power supply module, compatible with 5V, 3.3V
  Applicable to MB102 breadboard
  Input voltage: 6.5-12V (DC) or USB powered
  Output voltage: 3.3V, 5V switchable
  Maximum output current: <700ma
  Up and down two independent control, can switch to 0V, 3.3V, 5V
  Onboard two 3.3V, 5V DC output pins
65 Root Breadboard Cables:
Weight: about 35g
 
Bread line / breadboard line Bread board connection cable Bundle board line tie a tie 65 (there may be 1-2 of the error, please do not care about)
 
The total length of 65 test lines are:
 
24CM (with needle part) 4 root
 
20CM (with needle part) 4 root
 
16CM (with needle part) 8 root
 
12CM (with needle part) 49 root

MB102:
MB-102 quality bread board circuit board breadboard board universal board 165 × 55 × 10mm
 
One terminal strip: 630 jacks
 
Weight 89g / month
 
Two distribution strips: 200 jacks
Product dimensions: 5.6x16.5x0.85 (cm)
 
Phosphor bronze nickel-plated spring clip
 
Matching jumper, wire diameter 0.8mm
 
Plastic parts: ABS
 
Use: experiment, test
 
Features: recyclable, environmentally friendly recycling
           The structure is clear and easy to use
 
Breadboard dedicated power supply module:
       
    The breadboard can be assembled in fixed units
Breadboard dedicated power supply module, compatible with 5V, 3.3V
  Applicable to MB102 breadboard
  Input voltage: 6.5-12V (DC) or USB powered
  Output voltage: 3.3V, 5V switchable
  Maximum output current: <700ma
  Up and down two independent control, can switch to 0V, 3.3V, 5V
  Onboard two 3.3V, 5V DC output pins
65 Root Breadboard Cables:
Weight: about 35g
 
Bread line / breadboard line Bread board connection cable Bundle board line tie a tie 65 (there may be 1-2 of the error, please do not care about)
 
The total length of 65 test lines are:
 
24CM (with needle part) 4 root
 
20CM (with needle part) 4 root
 
16CM (with needle part) 8 root
 
12CM (with needle part) 49 root

MB102:
MB-102 quality bread board circuit board breadboard board universal board 165 × 55 × 10mm
 
One terminal strip: 630 jacks
 
Weight 89g / month
 
Two distribution strips: 200 jacks
Product dimensions: 5.6x16.5x0.85 (cm)
 
Phosphor bronze nickel-plated spring clip
 
Matching jumper, wire diameter 0.8mm
 
Plastic parts: ABS
 
Use: experiment, test
 
Features: recyclable, environmentally friendly recycling
           The structure is clear and easy to use
 
Breadboard dedicated power supply module:
       
    The breadboard can be assembled in fixed units
Breadboard dedicated power supply module, compatible with 5V, 3.3V
  Applicable to MB102 breadboard
  Input voltage: 6.5-12V (DC) or USB powered
  Output voltage: 3.3V, 5V switchable
  Maximum output current: <700ma
  Up and down two independent control, can switch to 0V, 3.3V, 5V
  Onboard two 3.3V, 5V DC output pins
65 Root Breadboard Cables:
Weight: about 35g
 
Bread line / breadboard line Bread board connection cable Bundle board line tie a tie 65 (there may be 1-2 of the error, please do not care about)
 
The total length of 65 test lines are:
 
24CM (with needle part) 4 root
 
20CM (with needle part) 4 root
 
16CM (with needle part) 8 root
 
12CM (with needle part) 49 root

MB102:
MB-102 quality bread board circuit board breadboard board universal board 165 × 55 × 10mm
 
One terminal strip: 630 jacks
 
Weight 89g / month
 
Two distribution strips: 200 jacks
Product dimensions: 5.6x16.5x0.85 (cm)
 
Phosphor bronze nickel-plated spring clip
 
Matching jumper, wire diameter 0.8mm
 
Plastic parts: ABS
 
Use: experiment, test
 
Features: recyclable, environmentally friendly recycling
           The structure is clear and easy to use
 
Breadboard dedicated power supply module:
       
    The breadboard can be assembled in fixed units
Breadboard dedicated power supply module, compatible with 5V, 3.3V
  Applicable to MB102 breadboard
  Input voltage: 6.5-12V (DC) or USB powered
  Output voltage: 3.3V, 5V switchable
  Maximum output current: <700ma
  Up and down two independent control, can switch to 0V, 3.3V, 5V
  Onboard two 3.3V, 5V DC output pins
65 Root Breadboard Cables:
Weight: about 35g
 
Bread line / breadboard line Bread board connection cable Bundle board line tie a tie 65 (there may be 1-2 of the error, please do not care about)
 
The total length of 65 test lines are:
 
24CM (with needle part) 4 root
 
20CM (with needle part) 4 root
 
16CM (with needle part) 8 root
 
12CM (with needle part) 49 root

 
 
 
 

Model: NJK-5002C
Supply voltage 5-30VDC
Detection distance 10mm (effective detection distance 0-10mm)
Load current 150MA (no more than)
Output form NPN three lines
Output state normally open (NO)
Detect objects metal material
Product Material Metal parts: Copper plastic components: PBT
External leads 1.2 m (standard, others according to customer requirements)
Output indication LED (red)
Form Factor Diameter: 12MM thread length: 32MM Overall Length: 37MM