Üzleti, irodai és ipari

Features:
This DC-DC step down module can convert 12V to 3.3V, and there is also a 12V output.
Specially designed two rows of needle fixing hole that can be directly fixed on universal to extend the experiment.
Using multiple input and output pins, easy to use and connect.
There is a red power supply indicator light that you can check power state.
Input voltage can be DC 6V to 12V, but input voltage should be 1V higher than output voltage.
Specifications:
Input Voltage: DC 6V to 12V
Output Voltage: 3.3V (± 0.05v error),
5V (± 0.05v error),
12V (12V input directly to the output)
Max. Output Current: 800mA (load current can not exceed 800mA)
Size: 32 x 32 x 13mm / 1.26 x 1.26 x 0.51"
Package Includes:
1 x Module

Features:
Made from premium material, simple construction, long service life.
It can effectively help the generator to adjust the current to the standard level.
Brand new and high quality rectifier, stable performance.
Adopting original imported diode, with excellent rectification function.
Professional manufacturing, exquisite workmanship, high reliability.
Specification:Condition: 100% brand new
Working temperature: - 40℃ to 125℃ (thyristor, rapid thyristor); -40℃ to 150℃ (rectifier tube, fast recovery diode, ultra-fast recovery diode)
Relative humidity: ≤85%
Altitude: below 1000 meters
Requirements and Suggestions for module installation:A) The installation of the module shall be smooth without scratches, bumps and sundries;
B) When installing the module to the heat sink, gently remove the oxide layer on the of the heat sink with fine sandpaper, wipe the of the heat sink with anhydrous ethanol, and then evenly apply a thin layer of heat-conducting silica gel on the contact of the copper base plate and the heat sink to make the contact good and reduce the thermal resistance;
C) When fastening the module on the heat sink , use or M6 flat batten and spring washer, and fasten the screw with (5 1)Nm force distance;
D) The wiring of the main electrode of the module shall be copper strip with smooth, flat and sufficient contact . The contact must be good. The tightening moment of force shall be: if screws are used, the moment of force shall be (3) Nm; if M6 screws are used, the moment of force is (5 1)Nm. if M8 screws are used, the moment of force is (9 1) Nm.
Package List:1 * MXY16-15 Rectifier Module
1 * MXG16-15 Rectifier Module
Note:1. The environment should be free from violent vibration and impact, and the environment medium should be free from corrosive metal, damaging the insulation of the magazine and atmosphere.
2. When forced air cooling is adopted in the module, the wind speed shall be 6 m/s and the ambient temperature shall be -40℃ to 40℃.

Description:
Adopting high quality brass, exquisite workmanship, easy to install and remove. Precision made brass tripod mono-pod screw adapters, they are solid and easy to grip. Allows you to do all kinds of configurations with your DSLR rigs.
Features:
1. Made of high quality brass material, durable and lightweight to carry.
2. Exquisite workmanship, easy to install and remove.
3. Standard 1/4"-20 male screw attachment type, standard 3/8"-16 female thread attachment type.
4. Allows you to do all kinds of configurations with your DSLR rigs.
5. Used for camera tripod and fast loading plate screw.
Specifications:
Material: Brass
Color: Golden
Package Weight: approx. 16g
Size: approx. 2 x 1.5cm / 0.7" x 0.5"
Nut Diameter: approx. 8mm / 3/8"
Screw Diameter: approx. 6mm / 1/4"
Quantity: 1pc
Package Included:
1 x brass tripod thread
Note:
1. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please in kind prevail.

Feature:1. The muzzle is made of high quality stainless steel, with high hardness and durability.
2. Simple installation and operation, easy to use.
3. The nozzle is easy to remove, does not block the field of view, and is easy to operate.
4. Manufactured with strict technology and good quality.
5. There are 7 specifications to choose from, which can meet different needs
Specification:
Item Type: Heat Nozzle
Material: Stainless Steel
Color: Silver
Optional Nozzle Type: Short Nozzle, Long Nozzle
Optional Length: 3MM, 4MM, 5MM, 8MM, 10MM
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Nozzle

Features:
100% brand new and high quality
It is made of high quality material, durable in use
High-density polished, super-hard,wear-resistant, high temperature.
Mainly used in cutting and hook slots.
Great tool replacement for the broken one
Specification:
Material: HSSAL
Flutes : Three Flutes
Mill diameter: 3mm /0.1in
Shank diameter: 6mm /0.2in
Flute length: 19mm/0.7in
Total length: 63mm /2.5in
Package included:
1 x End Mill Cutter CNC Bit Extended

Features:
1. Made of natural latex, safe and sanitary.
2. Perfect accessory for orthodontics.
3. Good elastic, not easy to break.
4. 100pcs/bag of the rubber band, durable to use.
5. Professional for dental use.
Specification:
Condition: 100% Brand New
Item Type: Orthodontics Rubber Band
Color: As Pictures Show
Inner Diameter: 1/4(6.35mm / 0.25in)
Force: 3.5oz, 2.5oz(Optional)
Package Weight: Approx.3g
Package List:1 * Rubber Band (100pcs)

Features:
These ear clamps consist of a stainless steel into which 2 ears have been formed.
The clamp is placed over the end of the hose or tube to be connected.
Each ear should be at the base of the ear using a special pincer tool.
It permanently deforms, pulling the , and causing the to tighten around the hose.
Perfect to clamp silicone or rubber hoses of fuel, petrol, etc on automobiles.
Specifications:
Material: Stainless steel
Surface Finishing: Zinc plating
Color: As picture
Size: 5-7mm, 7-9mm, 9-11mm, 11-13mm, 13-15mm, 15-18mm, 17-20mm, 20-23mm(Optional)
Quantity: 10pcs
Package Includes:
10 x Hose Clamps
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:1. Resistor range from 10-1M Ohm values; ±1% tolerance, 1/4W; work flawlessly within tolerances.
2. Clear colored bands with color guide to make the job easy for you.
3. User-friendly design, it has already been labeled and arranged for you.
4. High stability and low temperature coefficient.
5. Automatic insertion is applicable.
Specification:Condition: 100% Brand New
Material: Metal Plastic
Size: Approx. 86 * 60 * 20mm/3.2 * 2.4 * 0.8in
Weight: Approx. 39g
Specific Specifications:
1% 30 kinds of resistance each 10
10 Ω
200 Ω
510 Ω
3. 3K Ω
20K Ω
220K Ω
22 Ω
220 Ω
680 Ω
4. 7K Ω
47K Ω
300K Ω
47 Ω
270 Ω
1K Ω
5. 1K Ω
51K Ω
470K Ω
100 Ω
330 Ω
2K Ω
6. Ω
68K Ω
680K Ω
150 Ω
470 Ω
2.2K Ω
10K Ω
100K Ω
1M
Package List:300pcs 1/4w Resistor Kit
Note:Due to the heavy and tedious work of packaging, there may be a slight difference of number of 1-2 or repetition of individual product. Thanks for your understanding.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:1.Made of high quality material, corrosion-resistant, sturdy and durability.
2.Use for mountain bike transmission, front and rear dial, brake and road bike down tube stop-bolt.
3.Lightweight, easy to install and use.
4.A necessary component for bicycle cables adjusting and bike repairing.
5.Suitable for most road/ mountain bikes thumb shifter, rear derailleur, brake cable adjustment.
Specifications:Material: steel
Color: As picture shown
Size: Approx. 1.2x2.6cm/0.5x1in
Screw: screw
Structure: steel screw spring buckle engineering plastic cover
Packing List:3 Pair x Screw

Features:Use this popular film for taking excellent bisecting angle radiographs.
Eliminates manual retention of film packet.
For anterior and posterior radiographs.
Sturdy molded plastic.
For steam autoclave, chemiclave, or cold disinfectants.
Specification:Item Type: Dental Film Clip
Material: Plastic
Color: Blue
Size: Approx. 12.6 x 2.5 x 1.1cm / 5 x 1 x 0.4inch
Weight: Approx. 18g / 0.6oz
Package list:
1 x Dental Film Clip

Feature:1. Ear Protection Hook is made of soft silicone material, it can relieve the pressure on the ears.
2. Compact and lightweight, simple designed, it is convenient to use.
3. Ergonomic designed, perfectly fit for the most ear.
4. Exquisite and texture, soft touching, wears comfortable.
5. Simple and easy installation and comfortable to wear.
Specification:
Item Type: Silicone Ear Protection Hook
Material: Silicone
Optional Color: White, Black, Sky Blue
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:2 Pair x Silicone Ear Protection Hook

Specifications:Material: High-speed Steel (HSS)
Suitable for soft metal, aluminum, iron
Size:M10 x 1.5: Total length: 59mm, Spiral length: 20mm, drill diameter: 8.5mm
Handle: 6.35mm
(Notice: Manual measurement may be a little error please understand!)
Package include:1 x Hexagonal Handle Compound Tap Drill Bits
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:100% brand new and high quality
Universal, size from 3mm to 16mm
Material: HSS
Application: Generally applicable to through-hole, blind hole processing, for hole processing chip scrap removal is particularly outstanding
Package Included:1 x Drill Hand Reamer
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Specifications:Material: High-speed Steel (HSS)
Suitable for soft metal, aluminum, iron
Size:M6 x 1: Total length: 58mm, Spiral length: 28mm, drill diameter: 5.0mm
Handle: 6.35mm
(Notice: Manual measurement may be a little error please understand!)
Package include:1 x Hexagonal Handle Compound Tap Drill Bits
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Feature:1. These cap cover nuts and exposed bolts and provide effective protection against damage and weathering.
2. It will improve the finished appearance of your product, more beautiful and attractive.
3. Enhance the quality of the nut and bolt head, especially used for JDM car accessories.
4. Hexagonal heavy nylon, can protect against weathering and tampering.
5. Easy to install and remove, offer you much convenience.
Specification:
Item Type: Screw nut protection cap
Condition: Brand new
Material: Plastic
Color: Black
Size: M6 screw and nut cover
Height: Approx.13mm/0.50in
Fitment:
Fit for JDM car accessories
Fit for Stylin car
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:
10 x Screw Nut Protection Cap

Features:
These miniature bearings are made of high quality bearing steel for low noise and long service life.
They are double shielded to avoid contaminants entering and save lubricant.
Bearings have 8mm inner diameter, 19mm outer diameter and 6mm thickness.
These are great for small hobby 8mm shaft/rod projects.
There comes total 10 pieces miniature bearings which you may use for many different projects.
Specification:
Model: F698ZZ
Inner Diameter: 8mm / 0.3in
Outer Diameter: 19mm / 0.7in
Thickness: 6mm / 0.2in
Property: High speed
Application: Universal
Rolling : Single row balls
Race Type: Deep race
Material: Bearing steel
Angle: 15 degree
Sealing: Double-shielded
Weight: 90g / 3.2oz (approx.)
Package list:10 * Bearings

Feature:1. The clips are made of metal material with a shape of sapling.
2. The kawaii shape clip is suitable for many scenarios.
3. Well designed and crafted for high quality and long service life.
4. The design is simple and fashionable,a perfect stationary for your study.
5. With this clip,you can arrange your papers well and neat.
Specification:
Item Type:Clip
Material:Metal
Shape:Sapling
Color:Green
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:12 x Clip

Description:This Double-edged engraving router bit is perfect tool for woodworking,varies sizes can meet your different need.
Features:1. Double-edged cutting , excellent concentricity
2. Suitable for materials: Acrylic, MDF, PVC, engraving and chamfer, etc
3. Cut decorative "V" grooves and lettering on signs with the "V" bit, using with an edge guide to chamfer and bevel edges
4. The item is only used as engraving tool, not hazardous article
5. Varies sizes for your choice
Specifications:Material: Alloy
Color: As the picures show
Shank Diameter: 6mm
Cutting Blade Diameter(Optional): 8mm / 10mm / 12mm / 15mm / 16mm / 18mm / 22mm / 25mm / 32mm
Weight: 11-33g
Quantity: 1pc
Package Included:1 x V Sharpen Bit

Description:This Double-edged engraving router bit is perfect tool for woodworking,varies sizes can meet your different need.
Features:1. Double-edged cutting , excellent concentricity
2. Suitable for materials: Acrylic, MDF, PVC, engraving and chamfer, etc
3. Cut decorative "V" grooves and lettering on signs with the "V" bit, using with an edge guide to chamfer and bevel edges
4. The item is only used as engraving tool, not hazardous article
5. Varies sizes for your choice
Specifications:Material: Alloy
Color: As the picures show
Shank Diameter: 6mm
Cutting Blade Diameter(Optional): 8mm / 10mm / 12mm / 15mm / 16mm / 18mm / 22mm / 25mm / 32mm
Weight: 11-33g
Quantity: 1pc
Package Included:1 x V Sharpen Bit

Features:
Made from high quality alloy, this is a durable hand scriber used to mark lines.
Designed with a clip so you can easily clip it in your pocket for convenient carry.
The scriber is in a similar size of a pen and you can hold and use it as using a pen.
Comparing to pencil or ink line, the scriber line is clear to see, not easily erased, and accurate due to its thin mark.
It is widely used for scribing on glass, tiles and many other hard brittle materials.
Specifications:
Material: Alloy
Color: Gold, Silver (Optional)
Length: 14.5cm / 5.7"
Quantity: 1
Package Includes:
1 x Scriber

Features:
100% brand new and high quality
Made of premium iron material for durability
Great replacement of the broken one
These Jigsaw Blade are used for fixing Jigsaw Blade
This Jigsaw Blade is Easy to install
Specification:
Model:Z01401
Material: iron
Purpose: fixed saw blade
Weight: 1 g
Package list:
1 x Jigsaw Blade

Features:
100% brand new and high quality
Falling edge - triggered. Initial state after power no voltage output, once triggered, output terminal output the power supply voltage, after once again trigger the output terminal no voltage output, and so on.
With Low standby power consumption, and high output power.
Driver IC is Dual P-channel MEM2313,Maximum drive current is 6A
Applications: MCU Development Board, Motor,mobile power, LED Lighting,5V Relay,esp8266 WIFI MODULE, 315M 433M Wireless remote controller
Specification:Power supply voltage:DC 2.5V-6V
Standby current:less than 10uA
Driver IC:Dual P-channel MEM2313
Maximum drive current : 6A
Allowing continuous output current:5A(5V-6V)
4A(3.7V-5V)
2A(2.5V-3.7V)
Pin pitch: 2.54mm
Weight: Approx.1g
Pin description:Vo:output
Vi:power supply
G:power ground
T:trigger signal input terminal
Package list:1 x Latch Bistable Self-locking Trigger
Note: inductive load, the load to the appropriate freewheeling diode in parallel to avoid damaged to the switching elements of the circuit.

Descriptions:
These drill bits are made of M35 material, includes 5% cobalt, high hardness, stable performance. Cobalt steel extends cutting edge life and maintains cutting life after resharpening
for drilling on stainless steel, cast iron, sheet metal, steel plate, Angle iron.
Features:
Made of M35 material, includes 5% cobalt, high hardness, stable performance.
135-degree split-point tip starts drilling immediately with less force and eliminates "walking" across the work surface.
for drilling on stainless steel, cast iron, sheet metal, steel plate, Angle iron.
With high surface finish, high grinding precision , the blade is and durable in use.
It is widely used in the drilling of stainless steel plate, automobile spring steel and die steel
Cobalt steel extends cutting edge life and maintains cutting life after resharpening
Specifications:
Material: HSS CO/M35
Drill bit size(Optional):1.0, 1.5mm, 2mm, 2.5mm, 3.0mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 5mm
Quantity:10
Specification(mm)
Working length
Total length
Weight(g)
1
12
30
3
1.5
18
40
6
2
24
49
11
2.5
30
57
19
3
33
61
30
3.2
35
65
35
3.5
40
70
44
4
43
75
57
4.5
43
80
72
5
51
85
99
Package included:
10 x M35 Cobalt Drill Bits

Features:1. The panel is made of ABS flame retardant material, which is solid and durable.
2. American type junction box / wall socket cover / wire hole cover.
3. Free welding and flexible wiring
4. Applicable for engineering wiring.
5. Wall panel comes with mounting screws for easy installation.
Specification:Condition: 100% Brand New
Material: ABS
Color: White
Size: Approx. 11.5 * 7 * 2.6cm / 4.53 * 2.76 * 1.02inch
Weight: Approx. 20g
Package List:1 * Face Plate
2 * Screws

Description:
Tee is a pipe fittings, its connection is directly connected with the three-pipe welding.
Features:
1. Anti-corrosion
2. 304 stainless steel, strength is very high
3. Watertight, no burst, fire, earthquake
4. Long service life
Specifications:
Material: stainless steel 304
Size: 1/2''. 1/4'' option
Connection:NPT-NPT-NPT
Maximum pressure: 150 PSI
Temperature: -20~220℃
Length:37mm
Package Includes:
1X Brand New Tee 3 way Female Threaded Pipe Fittings Stainless Steel SS 304
Note:
1.Please allow 1-2mm differs due to manual measurement, thanks.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, Thank you!

Description:
This is a LED power push button . It is a durable made of industrial strength copper and nickel components, and its metal button head can withstand longstanding press, pretty durable in using. It adopts rubber and hexagonal nut fixed, making it anti dust and waterproof, which is very great for outdoor use. The light of the LED power will help you navigated in the dark and give a sophisticated look. you a cheerful operation with our product.
Features:
1. Made of brass nickel plated material, strong and durable.
2. High-grade appearance and nice touch feeling.
3. Adopt rubber and hexagonal nut fixed, anti dust and waterproof, which make it great for outdoors use.
4. Copper plating silver pin terminals for good conductive properties.
5. Momentary type, push it-on, release it-off.
6. Metal button head durable for longstanding press.
Specifications:
Material: Brass nickel plated
Color: Silver
LED Color: Red, green, blue, white (optional)
Rating: 3A 12V
LED Voltage: Red LED - 2V
Green, blue, white LED - 3V
(When the voltage is higher than 2V or 3V, you need to add external resistor.)
IP Rating: IP65, IK08
Screw Thread Width: 12mm / 0.47"
Dimension: 1.3 x 2.2cm / 0.51" x 0.87"
Package Weight: Approx. 8g
Operation Type: Momentary type (push it-on, release it-off)
Wire Connection Methods:Introduction about this item by the picture.
Case 1: The LED light will turn on when pressing the button.
Case 2: The LED light will always on as it links the battery.
Package Included:
1 x LED Button
Note:
1. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

5Pcs Dental Silicone Brush are specially designed for dental work, also can be used for nail art work. Different shape nib, meet various need.
Features:
Includes 5pcs brush pen.
Different shape nib, meet various need.
Easy and convenient to use and clean.
Perfect tools specially designed for dental work.
Also can be used for nail art work.
Specification:Item Type: Dental Tool
Material:Silicone
Color: As Pictures Show
Size: 17.5 * 0.6cm / 6.9 * 0.2inch
Package Weight: approx. 19g
Quantity: 5Pcs
Package list:5Pcs Dental Silicone Brush

Description:
Miniature ball bearing is available ball bearing of small size. This miniature ball bearings has a 8mm inner diameter, a 22mm outer diameter and a 7mm thickness. Ball bearing of this size is great for precision work and applications that require a lot of functional mechanical parts, such as mechanical equipment, electrical instrument, toy, door and window.
Features:
This miniature bearing is made of high quality steel andceramic for low noise and long service life.
Bearing with ceramic balls is better resistant to corrosion and rarely require lubrication.
Bearing has a8mm inner diameter, a 22mm outer diameter and a 7mm thickness.
It isgreat for 8mm shaft/rod projects such as mechanical equipment, electrical instrument, toy, door and window.
608 bearing is used in a wide variety of applications including, electric motors, home appliances, toys and much more.
Specifications:
Material: Bearing steel(races), ceramic(balls)
Inner Diameter: 8mm / 0.31"
Outer Diameter: 22mm / 0.86"
Thickness: 7mm / 0.27"
Package Includes:
1 x Bearing

Description:Material: Aluminum Alloy
Type: Countersunk Head Washers
Treatment: Anodize
Size: M3 / M4 /
Color: Gray / Gold / Royal Blue /
Quantity: 10pcs/Bag
Note:
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Includes:1 x 10pcs Countersunk Head Washers
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:
1. 2 position switch, 1NO(normal open) 1NC(normal close).
2. Made of durable material, with long lifespan.
3. This switch has self-locking function.
4. With good insulation performance.
5. Quality assurance, stable and reliable.
Specification:
Model: LAY37-11X/21
Material: Plastic, Metal
Working Voltage: 220V
Working Current: 5A
Rated Thermal Current: 10A
Contact Resistance: 20Ω
Insulation Resistance: 20MΩ
3C Rated Voltage Range: ≥440V
Mount Hole: 22mm
Weight: Approx. 38g/1.34oz
Package List:
1 * Selector

Features:
These nozzle tips are suitable for MAX1650 cutting torch
Adoption of tellurium copper material is both good free cutting performance and excellent electrical and thermal conductivity, as well as corrosion and electrical ablation resistance
5 pcs nozzles are available, convenient to replace the broken one during the cutting process, complete the cutting project smoothly.
Mainly used in the field of metal cutting, such as carbon steel, stainless steel, aluminum and copper
Nozzle are regarded as cutter consumables, they are essential to cutting project.
Specification:
Model: 220011
Type: consumables
Working pressure: 0.2-0.8Mpa
Working current: 100A
Suitable model: for POWERMAX1650
Size: 22*16mm/0.9*0.6in
Weight: Approx. 89g/3.1oz
Package list:
5 x nozzles with box

Feature:1. Easy to install and replace, the broken one can be easily replaced.
2. High quality metal material makes the blade firm and durable to use.
3. Wonderful tool for cutting jewelry, it is a practical accessory.
4. Convenient and easy to use, suitable for jewelry maker and worker.
5. 8pcs blades in total, which can meet your different cutting needs.
Specification:
Condition: 100% Brand New
Item Type: Saw Cutting Blade
Material: Metal
Application: Jewellery Tool Accessories
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:8 x Saw Cutting Blade

Features:
1. 100% brand new and high quality.
2. Mainly used for insulation protection of wire core, solder joints, inductors, also for rust prevention and corrosion protection of metal pipes.
3. The heat shrink tube would shrink and wrap the protected things tightly if under high temperatuer.
4. Easy to use - select the appropriate tube, put it on the wire joint and heat it to make it shrink with an air heater.
5. Flame retardant, wear resistant, with good sealing ability.
Specification:
Material: XLPE (crosslinked polyethylene)
Quantity: 100pcs
Color: Green, Blue, Yellow, Red,
Package weight: Approx. 31g/1.1oz
Package list:
20 x Heat Shrink Tube 1.0mm*100mm (4pcs per color)
20 x Heat Shrink Tube 1.5mm*100mm (4pcs per color)
20 x Heat Shrink Tube 2.5mm*100mm (4pcs per color)
20 x Heat Shrink Tube 3.0mm*100mm (4pcs per color)
20 x Heat Shrink Tube 5.0mm*100mm (4pcs per color)
Note:
1. Due to the difference between monitors and light effects, the pictures may not reflect the actual color of the item.
2. Please allow slight error due to manual measurement. Thanks for your understanding.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:Spring test probes are necessary parts for PCB testing to access components on printed circuit assemblies.
There are total 100 pcs spring test probes in one set that you can use for a long time.
Cone shape head can be used for testing through-hole components.
Widely used for testing PCB gold fingers(edge connectors) and pads.
They are great replacement probes if you need to change broken or old test probes.
Specification:P75-E2:head Shape: Cone
Current Rating: 3A
Resistance: 50mΩ
Stroke: 6.5mm
head Diameter: 1.5mm
Probe Tube Diameter: 1.36mm
Probe Rod Diameter: 0.99mm
Probe Length: 33.3mm
Boring Size: 1.7mm
Min. Test Interval: 2.54mm
Quantity: 100pcs
P50-J1:head Shape: Round
Current Rating: 3A
Resistance: 50mΩ
Stroke: 2.6mm
Probe Tube Diameter: 0.68mm
Probe Rod Diameter: 0.48mm
Probe Length: 16mm
Boring Size: 0.9mm
Min. Test Interval: 1.27mm
Quantity: 100pcs
P100-E2:head Shape: Cone
Current Rating: 3A
Resistance: 50mΩ
Stroke: 6.5mm
head Diameter: 1.5mm
Probe Tube Diameter: 1.36mm
Probe Rod Diameter: 0.99mm
Probe Length: 33.3mm
Boring Size: 1.7mm
Min. Test Interval: 2.54mm
Quantity: 100pcs
P50-B1:P50-B1 - 16mm
Pin Centre: 0.68mm
Min test distance: 1.27mm
Spring Pressure: 75g
Full Stroke: 2.65mm
Current Rating: 3A
Current Resistance: 50mm
Plunger: Heat Treated Beryllium Copper
Barrel: Phosphor Bronze . Gold Plated
Spring: stainless steel
P75-B1:Specification:spring thimble
Needle tube diameter: 1.02mm
Needle bar diameter:0.74mm
Pin Total Length: 15.8mm
Drill size: 1.4mm;
Minimum distance between test: 1.91mm
Package Included:100 x Probes
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Description:
Miniature ball bearing is available ball bearing of small size. This miniature ball bearings has a 8mm inner diameter, a 22mm outer diameter and a 7mm thickness. Ball bearing of this size is great for precision work and applications that require a lot of functional mechanical parts, such as mechanical equipment, electrical instrument, toy, door and window.
Features:
This miniature bearing is made of high quality steel andceramic for low noise and long service life.
Bearing with ceramic balls is better resistant to corrosion and rarely require lubrication.
Bearing has a8mm inner diameter, a 22mm outer diameter and a 7mm thickness.
It isgreat for 8mm shaft/rod projects such as mechanical equipment, electrical instrument, toy, door and window.
608 bearing is used in a wide variety of applications including, electric motors, home appliances, toys and much more.
Specifications:
Material: Bearing steel(races), ceramic(balls)
Inner Diameter: 8mm / 0.31"
Outer Diameter: 22mm / 0.86"
Thickness: 7mm / 0.27"
Package Includes:
1 x Bearing

Features:1. Made of high quality material, nontoxic and durable.
2. This portable box is specially used to store or dentures.
3. The box is small and water-resistant, easy to carry.
4. With breathable interlayer, drying quickly, reducing growth.
5. Provides perfect tools for the elderly to save their dentures.
Specification:Item Type: Denture Box
Material: PP
Optional Color: Dark Blue, Light Blue, White
Size: Approx. 9.3 * 9 * 7cm / 3.7 * 3.5 * 2.8in
Weight: Approx. 50g
Package list:1 x Denture Box (false teeth is not included)

Features:
1. Adopt PP insulation material, the temperature is up to 105℃, it should not be embrittled
2. The contact material is made of high quality brass and has excellent current load capacity for safety.
3. Great workmanship, it can make sure the stability of transmission
4. This connector is of cold pressing production process which has stable performance
5. The using wire range is from 0.75-2.5mm²/AWG 14 to 18
Specification:
Condition: 100% Brand new
Interface Type: AC/DC
Production Process: Cold pressing
Contact Material: Brass
Insulation Material: PP
Voltage Level: 300V Maximal. 75℃
Using Wire Range: 0.75-2.5mm²/AWG 14 to 18
Size: Approx. 19 x 31.5mm / 0.7 x 1.2in
Package List:
25 x Wire Connector

Feature:1. High adhesion, high transparency, can be used for packaging, thermoplastic, composite, heat sealing.
2. Applicable to paste electrostatic sensitive devices, electronic passive component processing office, workstation, etc.
3. Made of high quality polypropylene material, it has strong chemical resistance, wear resistance and easy removal.
4. With anti-static characteristics and clear transparency, it is suitable for bag sealing and other electronic product packaging.
5. Can be used in circuit board, notebook computer, mobile phone communication and other external packaging of anti-static products and dust-free room.
Specification:
Condition: 100% Brand New
Item Type: Tape
Material: Polypropylene
Color: Transparent
Long-Term Temperature Resistance: 80℃
Temperature Range: 0℃-80℃
Product Size:
Width: Approx. 25mm / 1.0in
Length: Approx. 33m / 108.3ft
Application: For packaging, thermoplastic, composite, sealing
Uses: Suitable for pasting electrostatic sensitive devices, electronic passive component processing offices, clean rooms, workstations
Features: In addition to the characteristics of high adhesion, soft fit and non-residual glue, it also has anti-static characteristics and clear transparency
Application: It is used for external packaging of anti-static products and clean room use for circuit boards, notebook computers, mobile phones, etc. It can also be used for pasting electrostatic sensitive devices, packaging bag seals and other electronic product packaging
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Tape
Note:
1.Please allow 0-1 inch error due to manual measurement. Thanks for your understanding.
2.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

High Hardness Stepper Motor Durable Module for 3D Printer Electronic Product
Features:
1. The A4988/DRV8825 can be used, pay attention to the direction when inserting, otherwise the drive may be burnt.
2. The position where the jumper hits the ON DP indicates 16 subdivision (4988) or 32 subdivision (8825).
3. Jm can connect the motor, easy to operate.
4. Jv can connect 5V and 12V-24V power supplies.
5. The ESDG of corresponds to the Enable Step Dir GND drive signal output on the connection.
Specification:
Condition: 100% Brand New
Item: Motor Drive Expansion Board
Package List:
2 * Motor Drive Expansion Board
Note:
Pay attention to the direction when installing, otherwise it may burn the drive or even the motherboard

Feature:1. No loose wires, tape embrittlement danger, safe and visible, reliable to use.
2. Measure the voltage without removing tape, which is convenient for using.
3. Quick-direct plug, plug the wrong can be pulled out, followed again.
4. Made of quality nylon material, good stability and durability.
5. Built to meet standard specification, strictly follow factory quality control.
Specification:
Condition: 100% Brand New
Item Type: Wire Quick Connector
Material: Nylon
Product Model: 212
Rated Voltage: 250V
Rated Current: 20A
Color: Gray
Wiring Method: Plug-in
Can Withstand Instant Voltage: 4KV
Insulation Material: PA
Flame Retardant Grade: UL94 V-0 (V-2)
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:20 x Wire Quick Connector

HOME

HOME

HOME

HOME

HOME

HOME

Features:
1. 3 position switch, 2NO(normal open) 1NC(normal close).
2. Made of durable material, with long lifespan.
3. This switch has self-locking function.
4. With good insulation performance.
5. Quality assurance, stable and reliable.
Specification:
Model: LLAY37-20X/31
Material: Plastic, Metal
Working Voltage: 220V
Working Current: 5A
Rated Thermal Current: 10A
Contact Resistance: 20Ω
Insulation Resistance: 20MΩ
3C Rated Voltage Range: ≥440V
Mount Hole: 22mm
Weight: Approx. 39g/1.37oz
Package List:
1 * Switch

Features:
100% Brand new and high quality
Small, exquisite workmanship, long service life.
Clear display, easy to use.
High accuracy, and stable working performance
LED Display meter has wide measurement range of 20-75Hz
Specification:
Model: ST16HZ
Measurement range :20-75 (Hz)
Accuracy :±2%
Input signal amplitude :80-500 (V)
Applicable: circuit frequency measurement
Color: red, white, blue, green,yellow(Optional)
Weight: Approx.19g~21g/0.7oz~0.7oz
Package list:
1 x LED Hz Indicator

Features:
Carbon brush has less heat and low noise.
This product has longer service life and better performance.
It is a good spare part of your motor.
It inputs electrical energy to the coil through the commutator, changing the direction of the current.
These motor carbon brush is easy to install.
Specifications:Condition: Brand New
Color: Shown as Picture
Material: ABS: 191962-4, CB406, CB407, CB419
Size: Approx. 6 * 9 * 11mm/0.23 * 0.35 * 0.43 in
Fitment:Fit for MAKITA MODELS: 800, 910, 4304, 4304T, 4305, 4305T, 4306, 4340CT, 4340FCT, 4340T, 4341CT, 4341FCT, 4350CT, 4351CT, 4351FCT, 4390D, 6310, 6311D, 6408, 6807, 6821, 6823, 3824, 6824N, 6825, 6825R, 6826, 6826N, 6827, 8450, 8450K, 8451, 8451K, 9046, BO4556K, BO4565K, BO4900, BO4900V, BO4901, BO5000, BO5001, BO6030, DA301D, DA3010F, DA3011, DA3011F, DP3002, DP3003, DP4000, DP4001, DP4002, DP4003, DP4011K, HP1500, HP1501, HP1501K, HP1510, HP1620, HP1620K, HP1621, HP1621K, HP2000, HP2030, HP2031, HP2032, HP2033, HP2040, HP2041, HP2042, HP2050, HP2050F, HP2051, HP2051F, HP2070, HP2071, HP2071F, HR1800, HR1820, HR1830, HR1830F, HR2410, HR2420, HR2430, HR2431, HR2432, HR2440, HR2440F, HR2450, HR2450F, HR2450FT, HR2450T, HR2455, JR1000FT, JR1000FTK, N4304, N4305, N800, N910, UH4850, UH5540, UH5550, UH6350 UH6540.
Package List:2 * Carbon Brush

Feature:1. The plastic LED light is very suitable for professional completion of work.
2. Plastic bracket can easily fix the LED on the board, which keeps high practicality.
3. Light is also called a bezel, or casing. And diode 's quality is guaranteed, you can use it with confidence.
4. 5mm plastic LED light clip baffle mount can be easy to use in the practical life.
5. Built to strict quality control standards, diode mount is improved for more durability.
Specification:
Item Type: Diode
Material: ABS
Color:
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:200 x Diode