Üzleti, irodai és ipari

Features:
1. Real 304 stainless steel material, waterproof, anti-rust and anti-corrosion.
2. Three types available for different maximum load capacity, you can choose according to your needs.
3. Delicate technology, sturdy and durable, having long service time.
4. Widely used in tractive efforts of steel wire rope or other rope tools.
5. Support 360 degree rotation to prevent knotting of the rope and easy to use.
Specification:
Condition: 100% Brand New and High Quality
Material: 304 Stainless Steel
Color: Silver
Optional Type: m15, m20, m25
Load Bearing:
m15: Maxi. 35kg
m20: Maxi. 75kg
m25: Maxi. 150kg
Package List:
1 * Pulley

Features:
This is a boost module, step up transformer.
Input DC 12V, 220V AC can be obtained at the other end.
High frequency, higher output power, can drive 0W energy saving lamps.
This module can convert 8V-13V DC voltage to household 220V AC voltage.
Stable output voltage, high efficiency, low heat.
Specification:
Item Type: DC-AC Inverter Power Supply
Input Voltage: 12V DC
Output Voltage: 220V AC
Power: 40W
Module Size: 4.3x3.8x2.5cm/1.69x1.50x0.98inch
Package List:
1 x Step Up Transformer

Description:
An insert nut provides a threaded socket for a wooden workpiece, similar to a wall anchor. These insert nuts are inserted into a pre-drilled hole by screw in, in that case the external protrusions bite into the wood, preventing the nut from either turning or pulling out.
Features:
These insert nuts are made from high quantity zinc plated carbon steel for durability and rust protection.
Screw-in insert nuts have an external thread and hex socket drive and are screwed in with a hex key wrench.
Insert nuts are advantageous over barrel nuts and T-nuts, because they can be installed from one side of the workpiece.
There are screw-in insert nuts in different sizes and take different screw sizes that you can choose for your project.
The pre-drilled hole must be as deep as the length of the insert nut plus any portion of the that may be screwed past the end of the nut in the work piece.
Specifications:
Material: Zinc plated carbon steel
Type: Hex socket screw-in
Thread Type (pitch): Coarse thread
Size and Quantity(Optional):
M6*10mm 20pcs
M6*13mm 20pcs
M6*15mm 20pcs
M6*17mm 20pcs
M6*20mm 20pcs
M6*25mm 20pcs
M8*13mm 20pcs
M8*15mm 20pcs
M8*17mm 20pcs
M8*20mm 20pcs
M8*25mm 20pcs
M10*25mm 20pcs
Package Includes:
20pcs x Insert Nuts

Features:
Made of high quality material, safe and non-toxic, natural and eco-friendly.
Can adapt to water and land two different environments, brings you more fun.
Play the DIY toy, your children will have a sense of accomplishment.
Training hand ability, and imagination, potential.
Smooth of the model without burrs, no harm for children's hands.
Educational gift choice for children in festivals and birthday, bringing endless fun.
Specification:Condition: 100% Brand New
Item Type: Assemble Toy
Material: EVA
Suitable Age: Above 3 years old
Battery: 2 * AA Battery(Not included)
Size: Approx. 25*11*10cm/9.8*4.3*3.9in(After Assemble)
Package list:1 * Assemble Toy Set

Feature:1. The set including multiple inductance to meet different needs.
2. These inductance are of good durability and very useful.
3. These inductance are very light and portable.
4. The color of the inductance indicates the inductance value.
5. Professional and practical design with beautiful appearance.
Specification:
Item Type:Inductor
Inductance:1UH
10UH
22UH
33UH
47UH
100UH
150UH
220UH
330UH
470UH
560UH
1MH
Power:1/4W
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:120 x Inductor(10 Pcs of Each Type)

Features:Made of plating.
Elaborate made and defect free.
Shiny and elegant appearance.
Specification:Color: Silver
Material: plating
Permissible Error: /-0.003g
Item Weight: 1g / 2g / 5g /10g / 20g
Package Includes:1 * 1g Scale Weight
1 * 2g Scale Weight
1 * 5g Scale Weight
1 * 10g Scale Weight
1 * 20g Scale Weight .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:
A basic tool for every jeweler and others who may be making jewelry or doing repair work on jewelry.
Purely , exquisite craftsmanship.
Made of wood, it is crafted, durable, stable.
Light and small, you can take it with yourself.
Specification:
Material: Wood
Color: Shown As Pictures
Size: Approx. 13 * 4.7 * 2.5cm / 5.12 * 1.85 * 0.98inch
Weight: 65g
Type: Tool Part
Package List:1 * Wood Stopper

Description:
This is a push button switch. It is a durable switch made of industrial strength copper and nickel components, and its metal button head can withstand longstanding press, pretty durable in using. It adopts rubber ring and hexagonal nut fixed, making it anti dust and waterproof, which is very great for outdoor use. Wish you a cheerful operation with our product.
Features:
1. Made of brass nickel plated material, strong and durable.
2. High-grade appearance and nice touch feeling.
3. Adopt rubber ring and hexagonal nut fixed, anti dust and waterproof, which make it great for outdoors use.
4. Copper plating silver pin terminals for good conductive properties.
5. Momentary type, push it-on, release it-off.
6. Great for car switch, horn switch, kill switch, warning lights, fuse holders, fuse boxes and other electric products.
Specifications:
Material: Brass nickel plated material
Color: Silver
Switch Rating: 3A 12V
IP Rating: IP65, IK08
Button Shape: Round
Screw Thread Width: 19mm / 0.75"
Dimension: 2.1 x 2.6cm / 0.83" x 1.02"
Operation Type: Momentary type (push it-on, release it-off)
Package Included:
2 x Button Switch
Note:
1. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Features:
High quality breadboard designed for solderless testing of electronic circuits, reusable, environmental recycling.
Various electronic components can be inserted or pulled out as required.
Quickly build an electronic circuit prototype that can be easily modified.
No soldering required, saving circuit assembly time.
Perfect for electronic circuit assembly, debugging and training.
Specification:Plastic Parts: ABS
Weight: 64g / 2.3oz
Tie Points: 700 holes
Layout: 60 lines, 12 rows, 700 holes
Matching jumper wire diameter: 0.8mm
Size: 175 * 45 * 8mm / 6.9 * 1.8 * 0.3in
Package List:1* Breadboard

Cylindrical Wool Grinding Polishing Head Buffing Wheel 3mm Shank For Rotary Tool
Features:
Polishing head is made of wool felt which is wear resistance, have good polishing effect.
It is an efficient polishing tool in small area of rust deburring and polishing.
Grinding head with different kinds of sizes, meet your different needs.
Used for all kinds of mold, glass, medical equipment, gold and silver jewelry, metal, non-metallic surfaces, grooves and cone mirror polishing.
Suitable for pneumatic, electric rotary grinding machine.
Specification:Material: Wool & Iron
Weight: Approx. 24~47g/0.8~1.7oz
Shank Diameter: 3mm
Polishing Wheel Diameter: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm (Optional)
Package List:
Model
Specification
Quantity
#01
3*3mm
12pcs
#02
3*4mm
12pcs
#03
3*5mm
12pcs
#04
3*6mm
12pcs
#05
3*8mm
12pcs
#06
3*10mm
12pcs
#07
3*12mm
12pcs
#08
3*14mm
10pcs
#09
3*16mm
10pcs
#10
3*18mm
8pcs
#11
3*20mm
8pcs
Note:1. Please allow slight error due to manual measurement. Thanks for your understanding.
2. Please follow when polishing mill in one direction, not back and forth grinding, so the best and most durable.

Descriptions:
These silicone sealing gaskets adopt of food grade silicone material, safety and sanitary. Suitable for the stainless steel piping system in dairy, food, beer, beverage, pharmacy, cosmetics and other industries.
Features:
This silicone gasket fit standard 1.5" clamp fittings, apply to pipe outer Dia.50.5mm.
These silicone sealing gaskets adopt of food grade silicone material, safety and sanitary
The installation is simple, directly pressing in the middle of the chuck of the two quick release adapter connector.
This product is suitable for the stainless steel piping system in dairy, food, beer, beverage, pharmacy, cosmetics and other industries.
This item contains 10 pieces silicone sealing gaskets for easy replacement of the broken one.
Specifications:
Material: silicone
Size:1.5"
Outer diameter: 50.5mm/1.99inch
Quantity:10 pcs
Weight: 33g
Package Included:
10 x silicone sealing gaskets

Features:
These lovely paper clips are made of high quality stainless steel for durability.
The surface of paper clips is coated with plastic which provides a good feeling.
Special heart shape design makes these clips unique and bring much fun.
There are total 12 pieces of clips in one set that you may use for many paper sheets.
All paper clips are put in a small transparent box for convenient carry and storage.
Specifications:
Color: Red, Gold (Optional)
Material: Stainless steel
Surface Finishing: Plastic coating
Size: 2.5*2.5cm/1*1in
Quantity: 12pcs
Weight: 20g(approx.)
Package Includes:
12 x Paper Clips
Note:1. Please allow small size error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Feature:
1. Suitable for memo, documents, letters, reports, DIY, hand account, office, learning, etc.
2. Cute mermaids shaped makes these clips unique and bring much fun.
3. Beautiful color, especially conspicuous, allowing you to quickly find what you need.
4. PET plastic coated wire, green, environmentally friendly, safe and secure.
5. All paper clips are put in a small box for convenient carry and storage.
Specification:
Condition: 100% Brand New
Item Type: Paper Clip
Material: PET Plastic Coated Wire
Color:
Weight: Approx.23g/0.8oz
Applicable Occasion: Giving presents, holiday congratulations, office study
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
12 x Paper Clip
Note:
1. Please allow 1-2cm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Features:
100% brand new and high quality.
The power splitter can split one channel input signal into two channel output equal or unequal signals.
It can also be used as a combiner, that combined signals into one channel output.
There should be certain isolation between output port of a power splitter.
It has wide working frequency, small insertion loss, high gain and isolation, stable performance.
Specification:
Frequency Range: 100-2700MHz
VSWR: ≤1.4
Isolation: ≥20dB
Insertion Loss: ≤1
Passband Ripple: ≤0.3dB
Phase Imbalance: ≤3°
Impedance: 50Ω
Maximum Input Power: 25W
Weight: 11g / 0.4oz (approx.)
Package list:1 * Power Splitter
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Steel thread inserts can effectively improve screw connection, greatly improving the reliability. Used in all kinds of low strength materials, thread inserts can largely improve the wear resistance performance of screw connection, and avoid thread damage.
Features:
Steel thread inserts used in low strength materials such as aluminum, , can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition.
Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread.
Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resistance.
It can prevent screw from getting loose,especially used for products requiring high coefficient of .
Easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss.
Specification:
Material: Stainless steel 304
Size (inner diameter*installed pitch*installed length) & Quantity(Optional):
M20*2.5*1 D, 10pcs;
M20*2.5*1.5 D, 10pcs;
M20*2.5*2 D, 10pcs;
M20*2.5*2.5 D, 5pcs;
M20*2.5*3 D, 5pcs;
Weight: 121g~264g / 4.3oz~9.3oz (approx.)
Package list:
1 set * Threaded Inserts
Note: Installed length= #D means # x diameter, for example, M20*2.5*1 D has installed length = 1D = 1 x 20 = 20mm.

Descriptions:
These self -tapping thread inserts with self-tapping ability, so help save cost. Large contact surface with finished product, strong tensile strength. It is widely used in automobile industry, rail car industry, ship industry, household appliances, and other industries.
Features:
These self -tapping thread inserts with self-tapping ability, so help save cost.
Large contact surface with finished product, strong tensile strength.
It has the ability of strong vibration resistance, which can prevent loose.
The self-tapping screw installation does not need to be pre-tapped, it can be directly used by the installation tool to screw it into a specific hole reserved by the parent material.
It is widely used in automobile industry, rail car industry, ship industry, household appliances, construction machinery, business machines, electronic products, engineering plastics, advanced composite furniture, aluminum die-casting and other industries.
Specifications:
Material: Carbon steel (galvanized)
Size: M8 * M5 *10mm
Weight:18g
Package Included:
10 x self -tapping thread inserts

Features:
1. This is a 2 position momentary switch, 1NO(normal open) 1NC(normal close).
2. Used for control in electromagnetic starter, contactor, relay and other electrical circuits.
3. Adopt high quality plastic, flame retardant and resistant to high temperature.
4. This switch has good insulation performance.
5. Quality assurance, stable and reliable, long lifespan.
Specification:
Model: LA38-11BX22
Working Voltage: 220V/380V
Working Current: 10A
Rated Thermal Current: 20A
Contact Resistance: 50Ω
Insulation Resistance: 50MΩ
3C Rated Voltage Range: ≥440V
Mount Hole: 22mm
Weight: Approx. 49g/1.7oz
Package List:
1 * Auto Reset Switch

Features:
Adopting high quality material, sturdy and durable in use.
Compact size, exquisite workmanship, long service life.
Digital display for easy and clear reading.
LED display meter has wide measurement range of 0-100A.
High accuracy, and stable working performance.
Specification:Material: Plastic
Weight: 43g/1.5oz
Measurement Range: 0-100 (A)
Accuracy: / -2%
Power Supply Voltage: 65-500 (V)
Color: Red, Green, Yellow (Optional)
Size: 55*30*30mm/2.2*1.2*1.2inch
Package List:1 * Digital Ammeter

Circuit Breaker Alarm Switch Trip Alarm Home Circuit Breaker Accessories Plastic
Features:
1. Refractory, impact resistant plastic shell, long service life.
2. Light weight, compact size, easy to install.
3. The operation is simple and easy to control.
4. Stable performance, reliable and safe.
5. Make your home electricity safe.
Specifications:
Condition: 100% Brand New
Material: Plastic
Color: As Pictures Show
Rated Working Voltage: DC24-48V / AC220V
Fitment: for NXB
Package List:
1 * Circuit Breaker Alarm Switch

Features:
This fit for thermal dynamics MAX125 cutting torch.
Made of high quality tellurium copper, durable to use.
Machining by lathe ensures product concentricity and fine process.
Good replacement for old or broken ones to the best cut quality and reliability.
It has good resistance to high temperature, which can protect the torch well.
Specification:Model: 220976
Material: Tellurium copper
Applicable Torch Model: MAX125 cutting torch
Working Pressure: 0.2-0.8MPa
Cutting Thickness: ≤32mm
Suitable Media: Air
Pipe Interface Diameter: 8mm / 0.3inch
Height: Approx. 24mm / 0.9inch
Diameter: Approx. 35mm / 1.4inch
Weight: Approx. 47g / 1.7oz
Package List:1 x
Note: Please allow slight error due to manual measurement. Thanks for your understanding.

Feature:1. Made of high quality stainless steel, it is durable, wear-resistant and can be used for a long time.
2. Exquisite technology, smooth lines, sanitation and environmental protection, convenient for safety disinfection.
3. Arc edge design, not easy to scratch hands, to ensure the safe use of the needle.
4. This kind of disinfection bur box can resist high temperature sterilization, not easy to fade, it is a very practical dental tool.
5. With 30 holes, 20 holes for high speed, 10 holes for low speed, can accommodate a variety of dental tools, suitable for bur disinfection.
Specification:
Condition: 100% Brand New
Item Type: Disinfection Bur Box
Material: Stainless Steel
Color: Purple, Silver, Gold, Red, Blue, Green (Optional)
Holes: 20 Holes for High Speed, 10 Holes for Low Speed
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Disinfection Bur Box

Feature:1. Made of high quality stainless steel, it is durable, wear-resistant and can be used for a long time.
2. Exquisite technology, smooth lines, sanitation and environmental protection, convenient for safety disinfection.
3. Arc edge design, not easy to scratch hands, to ensure the safe use of the needle.
4. This kind of disinfection bur box can resist high temperature sterilization, not easy to fade, it is a very practical dental tool.
5. With 30 holes, 20 holes for high speed, 10 holes for low speed, can accommodate a variety of dental tools, suitable for bur disinfection.
Specification:
Condition: 100% Brand New
Item Type: Disinfection Bur Box
Material: Stainless Steel
Color: Purple, Silver, Gold, Red, Blue, Green (Optional)
Holes: 20 Holes for High Speed, 10 Holes for Low Speed
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Disinfection Bur Box

Features:
1. Made of the best quality steel, durable and long lasting for years' use.
2. This flat file can help you sharpen the saw for efficient work and save energy.
3. With a depth gauge, it can measure depth and very convenient to use.
4. Suitable for almost all types of chainsaws. Lightweight and compact size, easy to store and use.
5. Utility saw sharpener kit for forestry or agricultural workers.
Specification:
Item Type: Flat File
Material: Steel
Flat File Size (LxW): Approx. 19 x 1.5cm / 7.5 x 0.6in
Depth Gauge Size (LxW): Approx. 13 x 1.52cm / 5.1 x 0.6in
Depth Gauge Hole Diameter: Approx. 3.08mm / 0.1in
Weight: Approx. 50g / 1.76oz
Package List:
1 x Flat File
1 x Depth Gauge
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:
This flexible pressure sensor is based on new nanometer pressure-sensitive materials supplemented by ultra-thin film substrate.
Highly sensitive flexible nanometer materials can realize highly sensitive detection of pressure.
It has pressure sensitive function as well as water-resistant function.
When sensor detects outside pressure, the resistance of sensor will change.
Pressure signal can be converted into a corresponding electrical signal output using simple circuit.
Specifications:
Measuring Range: 0-500g, 0-2kg, 0-5kg, 0-10kg, 0-20kg (Optional)
Thickness: <0.25mm
Precision: ±2.5% (85% measuring range)
Repeatability: <±5.8(50% load)
Lifespan: >1million times
Initial Resistance: >10MΩ(no load)
Response Time: <1ms
Restore Time: <15ms
Test Voltage: DC 3.3V (typical)
EMI: Not generate
EDS: Not sensitive
Sensing Area Outer Diameter: 9mm
Sensing Area Inner Diameter: 7.5mm
Pin Spacing: 2.54mm
Quantity: 1
Package Includes:
1 x Pressure Sensor
Note: Please allow small size error due to manual measurement. Thanks for your understanding.

Features:
This flexible pressure sensor is based on new nanometer pressure-sensitive materials supplemented by ultra-thin film substrate.
Highly sensitive flexible nanometer materials can realize highly sensitive detection of pressure.
It has pressure sensitive function as well as water-resistant function.
When sensor detects outside pressure, the resistance of sensor will change.
Pressure signal can be converted into a corresponding electrical signal output using simple circuit.
Specifications:
Measuring Range: 0-500g, 0-2kg, 0-5kg, 0-10kg, 0-20kg (Optional)
Thickness: <0.25mm
Precision: ±2.5% (85% measuring range)
Repeatability: <±5.8(50% load)
Lifespan: >1million times
Initial Resistance: >10MΩ(no load)
Response Time: <1ms
Restore Time: <15ms
Test Voltage: DC 3.3V (typical)
EMI: Not generate
EDS: Not sensitive
Sensing Area Outer Diameter: 9mm
Sensing Area Inner Diameter: 7.5mm
Pin Spacing: 2.54mm
Quantity: 1
Package Includes:
1 x Pressure Sensor
Note: Please allow small size error due to manual measurement. Thanks for your understanding.

Features:
This flexible pressure sensor is based on new nanometer pressure-sensitive materials supplemented by ultra-thin film substrate.
Highly sensitive flexible nanometer materials can realize highly sensitive detection of pressure.
It has pressure sensitive function as well as water-resistant function.
When sensor detects outside pressure, the resistance of sensor will change.
Pressure signal can be converted into a corresponding electrical signal output using simple circuit.
Specifications:
Measuring Range: 0-500g, 0-2kg, 0-5kg, 0-10kg, 0-20kg (Optional)
Thickness: <0.25mm
Precision: ±2.5% (85% measuring range)
Repeatability: <±5.8(50% load)
Lifespan: >1million times
Initial Resistance: >10MΩ(no load)
Response Time: <1ms
Restore Time: <15ms
Test Voltage: DC 3.3V (typical)
EMI: Not generate
EDS: Not sensitive
Sensing Area Outer Diameter: 9mm
Sensing Area Inner Diameter: 7.5mm
Pin Spacing: 2.54mm
Quantity: 1
Package Includes:
1 x Pressure Sensor
Note: Please allow small size error due to manual measurement. Thanks for your understanding.

Features:
This flexible pressure sensor is based on new nanometer pressure-sensitive materials supplemented by ultra-thin film substrate.
Highly sensitive flexible nanometer materials can realize highly sensitive detection of pressure.
It has pressure sensitive function as well as water-resistant function.
When sensor detects outside pressure, the resistance of sensor will change.
Pressure signal can be converted into a corresponding electrical signal output using simple circuit.
Specifications:
Measuring Range: 0-500g, 0-2kg, 0-5kg, 0-10kg, 0-20kg (Optional)
Thickness: &;0.25mm
Precision: ±2.5% (85% measuring range)
Repeatability: &;±5.8(50% load)
Lifespan: >1million times
Initial Resistance: >10MΩ(no load)
Response Time: &;1ms
Restore Time: &;15ms
Test Voltage: DC 3.3V (typical)
EMI: Not generate
EDS: Not sensitive
Sensing Area Outer Diameter: 9mm
Sensing Area Inner Diameter: 7.5mm
Pin Spacing: 2.54mm
Quantity: 1
Package Includes:
1 x Pressure Sensor
Note: Please allow small size error due to manual measurement. Thanks for your understanding.

This Dental Polishing Kit is designed for repairing restorations such as oral high- porcelain teeth and light-curing resin.
Features:
1. Made of premium material, these teeth polishers are wear resisting.
2. High- polishing, high efficiency.
3. Little heat production, cause no damage to the dental restorations.
4. Come with a storage case, convenient to carry.
5. for the fine polishing of clinical metal alloy, porcelain crown, composite resin and more.
Specification:
Condition: 100% brand new
Quantity: 6pcs
: 7000 - 10000rpm
Weight: Approx. 21g
Package list:
6 * Dental Polishing Tools with Box

This DC power /connector is like another DC power /connector we provide, except that it terminates on a breadboard-friendly pin rather than a wide welded terminal. They are also compatible with our DC wall power supply, and have 5.5mm , and the center rod diameter is 2.1mm.
Features:
Achieve the standards of reliable product. Good contact interface and fine electrical property.
Easy to use. No need cutting and soldering, plug and operate.
Firmly connect and safely connect,not loosen. Buy with satisfaction and use at ease.
Work fluency and durability, which saves your time.
High temperature resistant covers and copper pins, durable and reliable.
High matching degree and perfect matching.
Specifications:Type: electronic components, others
Color: Black
Major Compatibilities: for Diecimila/Duemilanvoe 328, Mega 1280, Mega 2560, 328, Ardunio
Size (L * W * H): 1.45 x 0.90 x 1.00cm / 0.57 x 0.35 * 0.39 inches.
Packing weight: 65 g /2.3oz
Package List:50 * DC Power Barrel Adapters

Features:
This flexible pressure sensor is based on new nanometer pressure-sensitive materials supplemented by ultra-thin film substrate.
Highly sensitive flexible nanometer materials can realize highly sensitive detection of pressure.
It has pressure sensitive function as well as water-resistant function.
When sensor detects outside pressure, the resistance of sensor will change.
Pressure signal can be converted into a corresponding electrical signal output using simple circuit.
Specifications:
Measuring Range: 0~10kg
Thickness: <0.25mm
Response Point: <20g
Repeatability: <±4.1% (50% load)
: ±2.5%
Lifespan: >1million times
Initial Resistance: >10MΩ(no load)
Response Time: <1ms
Restore Time: <15ms
Test Voltage: DC 3.3V (typical)
Operating Temperature: -20℃ ~ 60℃
EMI: Not generate
EDS: Not sensitive
Sensing Area Outer Diameter: 9mm
Sensing Area Inner Diameter: 7.5mm
Pin Spacing: 2.54mm
Quantity: 1
Package Includes:
1 x Pressure Sensor
Note: Please allow small size error due to manual measurement. Thanks for your understanding.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Description:
These bits work fantastic on boards. and twisted flute will make the drilling be more easy and effortless. They come in a easy-to-use plastic case with a for each bit. Drills bits are perfect for delicate drilling through hard materials for model engineering, jewelry repairs, craft work, suitable for , SMT, CNC, mold, sculpture, plastic, copper, stainless steel.
Features:
Use high quality materials and fine grinding process makes bit more cutting edge.
Drill bit has a large scraps discharge space, little resistance and smoothly during the scraps discharge.
Reduce cutting force and broken drill, improve the quality of hole wall.
Easy to change out and do a great job cutting through the for solder holes.
Come in a great storage container that is easy to grab the drill bit you need when you need it.
Specifications:
Material: Cemented carbide, HHS
Color: Random
Cutting Edge Diameter: 0.1mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.7mm, 1.2mm, 1.3mm, 1.4mm(Optional)
Shank Diameter: Approx 3.175mm
Length: 38.1mm / 1.5"
Box Size: 8.7 x 5.3cm / 3.42 x 2.08"
Quantity: 10pcs per set
Weight: 38g(approx.)
Package Includes:
1 Set(10pcs) x Drill Bits
Note:Due to different batches, color of rings might be different from the ones in picture. Please take the real one as standard. Thanks for your understanding.

Features:
This flexible pressure sensor is based on new nanometer pressure-sensitive materials supplemented by ultra-thin film substrate.
Highly sensitive flexible nanometer materials can realize highly sensitive detection of pressure.
It has pressure sensitive function as well as water-resistant function.
When sensor detects outside pressure, the resistance of sensor will change.
Pressure signal can be converted into a corresponding electrical signal output using simple circuit.
Specifications:
Measuring Range: 0-500g, 0-2kg, 0-5kg, 0-10kg, 0-20kg (Optional)
Thickness: <0.25mm
Precision: ±2.5% (85% measuring range)
Repeatability: <±5.8(50% load)
Lifespan: >1million times
Initial Resistance: >10MΩ(no load)
Response Time: <1ms
Restore Time: <15ms
Test Voltage: DC 3.3V (typical)
EMI: Not generate
EDS: Not sensitive
Sensing Area Outer Diameter: 9mm
Sensing Area Inner Diameter: 7.5mm
Pin Spacing: 2.54mm
Quantity: 1
Package Includes:
1 x Pressure Sensor
Note: Please allow small size error due to manual measurement. Thanks for your understanding.

Features:
Made of high quality stainless steel, the gauge is sturdy and durable.
The gauge is clearly marked for convenient and easy reading.
The thread pitch gauge is great used to measure the pitch of a screw thread.
There are total 20 leaves in different size, the thread type is imperial 55°.
Small size and light weight, you can conveniently keep it in your pocket or tool bag.
Specification:Material: Stainless steel
Measuring Range:
Imperial 55°(20 leaves): 4G,4-1/2G,5G,6G,7G,8G,9G,10G,11G,12G,14G,16G,18G,19G,20G,22G,24G,28G,40G,48G.
Weight: 21g/0.7oz(approx.)
Package list:1 * Thread Pitch Gauge

Specification:Condition: Brand new
Material: brass
Color: as picture shows
Valve Type: Male/Female
Connections: 1/8"; 1/4"; 3/8"; 1/2"
Operating pressure: 0.8Mpa
4 styles for your choosing
Features:Made of copper
Regulate and control air, oil and water
Suitable for regular operation, lightweight
Small fluid resistance
Simple construction
Easy maintenance
Good sealed performance
Freedom from installation direction
Note:- Please allow 1-2cm errors due to manual measurement
- Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same
Package included:1 x mini ball valve .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Description:
If you are a model amateur, you would know that spindle gears are essential and necessary parts for models. Aircraft, automobiles, boats, robots and other small production of science and technology will all need to use spindle gears. Here we provide 26pcs spindle gears of different sizes and sleeves which may meet your basic needs for model making. They are also good replacement parts of old or broken gears.
Features:
Made of high quality plastic, wearable and long service life.
The products are for toys spindle gear spare parts, suitable for DIY model technology production.
Small parts, easy to use, great model making accessories for all kinds of cars, robots, etc.
This is the spindle gear set including many kinds of gear parts. It can meet your DIY needs.
Mainly used in the coreless motors,130.140.180.260.280.370 and all 2mm motors, such as 2.3mm circular shaft motors, 3mm D shaft gear motors, 4mm D shaft gear motors, etc.
Specifications:
Material: Plastic
Modulus: 0.5
Spindle Gears:White: 80.8A, 81A, 81.5A, 82A, 102A, 122A, 132A, 142A, 182A(9pcs)
Blue: 153AD, 152.3A, 15.317A, 154AD(4pcs)
Worm Gears: 6*62A, 6*82A(2pcs)
Bevel Gear: S162A(1pc)
Shaft Sleeves: 2mm(10pcs)
Weight: 4g(approx.)
Gear Diameter=(Teeth number 2) x 0.5
e.g. 81.5A
8 represents 8 teeth, Gear Diameter=(8 2) x 0.5=5mm
1.5A represents close-fitting with 1.5mm shaft.
e.g. 153AD
15 represents 15 teeth, Gear Diameter=(15 2) x 0.5=8.5mm
3AD represents close-fitting with 3mm D shaft.
Package Includes:
9 pcs x WhiteSpindle Gears
4 pcs x Blue Spindle Gears
2 pcs x Worms
1 pc x Bevel Gear
10 pcs x Shaft Sleeves
Note:Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Features:
Aviation plug is an electromechanical component connected to an electrical circuit.
This product is good connector for replacing the broken one
This aviation plug features excellent waterproof performance of IP68, more safe
Adopted of high quality materiel, greatly improve the number of plug in and out, and maintain the good conductivity.
This plug is mainly used in lamps and lanterns.
Specifications:
Material: plastic, brass contact
Type: 2pin, 3pin, 4pin, 5pin, 6pin, 7pin, 9pin (Optional)
Protection level: IP68
Length: 6.5cm / 2.56in
Weight: Approx. 17-19g
Package included:
1x Waterproof Aviation connector

Features:
Aviation plug is an electromechanical component connected to an electrical circuit.
This product is good connector for replacing the broken one
This aviation plug features excellent waterproof performance of IP68, more safe
Adopted of high quality materiel, greatly improve the number of plug in and out, and maintain the good conductivity.
This plug is mainly used in lamps and lanterns.
Specifications:
Material: plastic, brass contact
Type: 2pin, 3pin, 4pin, 5pin, 6pin, 7pin, 9pin (Optional)
Protection level: IP68
Length: 6.5cm / 2.56in
Weight: Approx. 17-19g
Package included:
1x Waterproof Aviation connector

Features:Professional dental measuring instruments, used in root canal measurement.
High quality plastic material with long service life, it can be used for a long time.
The product is lightweight and can be worn on your fingers.
It is convenient to clean the root canal, and the sponge can be removed and replaced.
With scales on both sides, the scale is accurate and easy to measure.
Specification:Item Type: Endodontic Files Cleansing Tool
Material: Plastic
Optional Colors: Blue, Green
Weight: Approx. 21g / 0.7oz
Package list:1 * Endodontic Files Cleansing Tool
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; } .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; } .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

1-20X 5.5 x 2.1mm Male DC Powre Plug Socket Jack Connector Adapter for CCTV LED
Specifications:Operating temperature: -50 C -68 C
Fitting Metal: stainless alloy interrupter, the outer layer copper silver-plated chrome (non-ferrous head)
Green Sticks marked - positive and negative.
Plastic fittings: Put exposure / antioxidant PVC plastic
The maximum transmission Current: 20A (1V-38V)
Transmission Voltage: 1V ~ 38V
Transmission power: 300W
Product Specifications: wire core thick, can withstand 12V-36V voltage, jacket with plastic and other materials, the line is soft, using high-fidelity design, transmission power good effect;
Size: About 5.5 * 2.1mm (inside diameter of 2.1mm outside diameter 5.5mm)
Color: Black and green
Attention:
Size may be slight inaccuracy due to different batches of the products, or hand measurement;
Color may be little different due to monitors. Please take real product as standard, thanks for your understanding!
Package includes:1-20PCS dc power plug male connector

Features:
1. This is a 3 position momentary switch, 2NO(normal open) 1NC(normal close).
2. Used for control in electromagnetic starter, contactor, relay and other electrical circuits.
3. Adopt high quality plastic, flame retardant and resistant to high temperature.
4. This switch has good insulation performance.
5. Quality assurance, stable and reliable, long lifespan.
Specification:
Model: LA38-20BX33
Working Voltage: 220V/380V
Working Current: 10A
Rated Thermal Current: 20A
Contact Resistance: 50Ω
Insulation Resistance: 50MΩ
3C Rated Voltage Range: ≥440V
Mount Hole: 22mm
Mechanical Life: times
Electrical Life: 500,000 times
Weight: Approx. 48g/1.7oz
Package List:
1 * Auto Reset Switch

Features:Snail silencer muffler 3 / 8PT 16mm filter pump compressor accessories.
Allow airflow through the muffler, but can prevent or reduce the spread of a sound device.
It is an important measure to eliminate aerodynamic noise.
Specifications:Material: plastic
Color: Black
Thread Dia. : 16mm (3/8PT)
Accessories Uses: filtration
Applicable compressor type: piston compressor
Package include:1 x Silencer .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Description:The lens in each pair of onion goggles offer eye protection designed to stop your eyes from tearing up when cutting onions. No more tearing, stinging, irritated eyes with onions and their pungent relatives. Great to use when chopping, mincing, dicing or slicing garlic, scallions and peppers. Sponge design for comfortable wear. Compact and portable size for easy storage.
Features:
The lens in each pair of onion goggles offer eye protection designed to stop your eyes from tearing up when cutting onions.
It also protects juices, fumes, spattering, and intense heat from entering the eyes when cooking in the kitchen.
No more tearing, stinging, irritated eyes with onions and their pungent relatives.
Great to use when chopping, mincing, dicing or slicing garlic, scallions and peppers.
Sponge design for comfortable wear. Compact and portable size for easy storage.
Specification:Condition: 100% Brand New
Material: PC
Color: Green
Product Size: Approx. 14.2 * 4.2 * 12.2cm / 5.6 * 1.7 * 4.8inch
Product Weight: Approx. 38g
Package Included:1 * Onion Cutting Goggle
Note:Due to manual measurements, there may be 1-2cm errors.

Features:
Made of high quality stainless steel, the gauge is sturdy and durable.
The gauge is clearly marked for convenient and easy reading.
The thread pitch gauge is great used to measure the pitch of a screw thread.
There are two gauges in one set, including imperial55° and metric60°.
Small size and light weight, you can conveniently keep it in your pocket or tool bag.
Specification:Material: Stainless steel
Measuring Range:
Imperial55°(20 leaves): 4G, 4-1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 28G, 40G, 48G.
Metric60°(20 leaves): 0.5, 0.6, 0.7, 0.75, 0.8, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0.
Weight: 40g/1.4oz(approx.)
Package list:2 * Thread Pitch Gauges

Feature:1. Rather easy and simple to install and remove, no any complicated procedures.
2. This cap cover nuts and exposed screws, offering effective protection against damage and weathering.
3. Hexagonal heavy nylon design can prevent from weathering and tampering for high reliability.
4. It will enhance the finished appearance of your product.
5. This M12 screw nut protection cap kit is helpful to improve the quality of the nut and screw head and extend their service life.
Specification:
Item Type: M12 screw nut protection cap
Condition: Brand new
Material: Plastic
Color: Black
Size: M12 screw and nut cover
Height: Approx.22mm/0.87in
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:10 x M12 Screw Nut Cap

Features:
100% brand new and high quality
The high voltage ceramic capacitors are made up of high quality military material, which provides the capacitor with good characteristics of very high voltage and frequency.
With excellent humidity resistance and reliable performance.
Wide application: Indispensable components for high voltage or the UHF instruments, such as high voltage and high frequency equipment, CT machine, X-ray machine, anion products, , electrostatic generator, detection equipment, transformer, fly back transformer, ignition, high voltage generator, electric batons, voltage multiplying module , electric equipment and small home appliance products, etc..
This is a great capacitors set for electronic professionals or enthusiasts.
Specifications:
Color: Blue
Capacitor: 1000pF
Rated Voltage: 20KV
Capacitance: Within the Specified Tolerance at 1KHz± 20% , 1.0± 0.2Vrms
Capacitance Tolerance:± 20%
Dissipation Factor(DF):DF≤2.0% at 1KHz± 20% , 1.0± 0.2Vrms
Dielectric Withstanding Voltage :1.5UR for 2 to 5s (Charge/Discharge Current≤50mA)
Insulation Resistance :10000MΩ min at 500VDC and 1minute electrification
Working temperature: -25 °C ~85 °C
Diameter:15mm/0.6in
Weight: Approx.24g/0.8oz
Package list:
5 x Ceramic Capacitor

Features:
These burrs are made of high speed steel for high hardness and high abrasion resistance.
There are total 10 pieces burrs in various shapes that you can use for many purposes.
3mm round shank would fit many electric powered or pneumatic powered tools and machine tools.
This set of rotary burrs could be used on wood, plastic and other soft materials.
Widely used for carving, shaping, slotting and for the removal of edges or corners, burrs and excess material.
Specifications:
Material: High Speed Steel
Round Shank Diameter: Approx. 3mm/0.12in
Length: Approx. 4cm/1.57in
Quantity: 10pcs
Weight: Approx. 29g
Package Includes:
10 * Burrs

Feature:1. High , stable performance and convenience to use.
2. Durable construction for long-lasting performance.
3. Perfect use for DIY, electrical equipment and electrical appliances.
4. The resistors assortment kit is convenient and practical.
5. 65pcs of the resistors can meet different using needs.
Specification:
Condition: 100% Brand New
Item Type: Resistors Assortment
Product Resistance: a total of 13 values, each value 5pcs.
100 ohm (101)
200 ohm (201)
500 ohm (501)
1K(102)
2K(202)
5K(502)
10K(103)
20K(203)
50K(503)
100K(104)
200K(204)
500K(504)
1M(105)
Quantity: 13 values x 5pcs, a total of 65pcs
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:65 x Resistors

Features:1. 2mm inner diameter / 4mm outer diameter Bowden tube for 3D printers.
2. White Teflon material, 1.5/2.0 meters long.
3. Can withstand temperatures up to 260 degrees Celsius.
4. Density: 2.15-2.20g / cm3.
5. Use plastic packaging, no need to tie, avoid forming a tight ring when storing!
Specification:Teflon Tube Length: 1.5 M, 2 M (optional)
Package list:1 * Teflon Tube

Features:Exquisite workmanship, sanitary and environmental, all places can be sterilized.
Small in size, light in weight, convenient to use.
Made of plastic, strong and durable.
Can be placed in various expanding needles, resistant to 134 degrees temperature.
Suitable for dental disinfection and oral care.
Specification:
Item Type: Dental Disinfection Box
Material: Plastic
Optional Color: Blue, Green, Orange, Light Blue, Gray, Black
Size: Approx. 6 * 1.4 * 3.5cm / 2.4 * 0.6 * 1.4in
Weight: Approx. 20g / 0.7oz
Package list:1 * Disinfection Box
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Description:
Model: SK8/SK10/SK12/SK16
Shaft ID: 8mm/10mm/12mm/16mm
Material: Aluminum Alloy
Package Included:
2 x CNC Linear Rail Shaft Guide Support
Note: Please read the instruction to confirm it is the correct size the bearing you are looking for.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }