Fémmegmunkáló berendezések

4 flutes End Mill Tungsten Carbide End Mill 75mm Length Flat Bottom High Quality
Features:
* Coating with TIALN Can Cutting Harden materiel, 3 times Durable than Carbide.
* Good milling and cutting performance, ensure the high efficiency of the work.
* Sufficient bending strength and wear resistance, the surface is clean, neat and no glitches.
* High strength, resistance to bending, breakage resistance, long service life.
* Suitable for DIY, Home and General Building / Engineering Using.
Specifications:
* Material: Tungsten Carbide
* Highest cutting hardness: HRC50
* Flute: 4
* Total Length: 75mm / 2.95''
* Blade Length: 25mm / 0.98''
* Diameter of Head: 10mm / 0.39''
Package contents:
1* Straight Shank 4 flutes End Mill
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

3mm Insert Semi-finishing 10Pcs Steel NC3020 ZQMX3N11-1E Gold Durable New
Features:
Good precision, high toughness and durability.
High hard, wear-resistant, strong shock resistance, thermal cracking, and resistance to deformation.
High cutting efficiency, long service life.
For steel semi-finishing.
High quality and brand new.
Specification:
Model: ZQMX3N11-1E
Material: YBC251
Color: Gold (As Picture Show)
Width: 3mm
Quantity: 10pcs/box
Package Contents:
10 * Cut-Off Grooving Parting Insert
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

10Pcs Set SP300 NC3020 GTN-3 3mm Grooving Cut-Off Carbide Inserts CNC Use Tool
Features:
Good precision, high toughness and durability.
High hard, wear-resistant, strong shock resistance, thermal cracking, and resistance to deformation.
High cutting efficiency, long service life.
For steel semi-finishing.
High quality and brand new.
Specification:
Model: ZQMX3N11-1E
Material: YBC251
Color: Gold (As Picture Show)
Width: 3mm
Quantity: 10pcs/box
Package Contents:
10 * Cut-Off Grooving Parting Insert
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Black Tool Holder Edge Wrench For VBMT1604 Inserts Lathe Carbon Steel Right
Details:
* This is turning tool holder for holding VBMT1604 insert. (insert is NOT included)
* Made of carbon steel, it is super durable and it has high hardness.
* Model: SVJBR 1616H16
* Material: carbon steel
* Direction: Right Hand
* Tool Cutting edge angle: 93degree
* Square Shank (WxH): 16*16mm(approx)
* Overall length: 100mm(approx)
* Color: Black(as pictures show)
* The insert in picture is NOT included. Only the turning tool holder.
Package contents:
1* SVJBR 1616H16 turning tool holder
1* Wrench
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

4PCS Motorcycle Battery Power Cut Off Switch Terminal Link Disconnect Swtich
Features:
100% brand new and high quality
Made of high-quality materials, durable
Motorcycle battery power off switch
Prevent battery leakage
Exquisite and compact, easy to install and disassemble
Zinc alloy body can extend service life
Application: motorcycle, small battery
Product parameters:
Color: gold and blue
Body size: 63 x 20 mm / 2.48 x 0.79 inches
Screw hole diameter: 6 mm / 0.23 inch
Weight: 40 grams
Rated current: 80A
Material: zinc alloy, plastic, iron
Installation: connect to the negative terminal of the battery
How to use: Unscrew the plastic lip to turn on, and unscrew it to cut off.
The package includes:
4 *Motorcycle battery cut-off switch
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

S12M-SDUCR07 Boring Bar Turning Tool DCMT0702 Carbide Insert Lathe Wrench Kit R1
Features:
User clamping and convenient to replace, only a wrench to complete the replacement of the cutter blade and pad.
High strength and hardness, durable in use.
High grip strength and impact resistance.
Clear speed advantage in cutting off a large margin and processing.
Suitable for semi-finishing, finishing.
High quality and brand new.
Specification:
Model: S12M-SDUCR07
Material: Steel
Blade Shank: 12mm (Approx)
Shank Length: 150 mm (Approx)
Wrench: T8
Accept Inserts: DCMT0702 (10pcs)
Package Contents:
1 * S12M-SDUCR07 Turning Tool Holder
1 * T8 Wrench
10 * DCMT0702 Blade
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

10pcs Tungsten Carbide Inserts TCMT 32.51 For 1/2" Lathe-Turning Tool 21*30cm
Warm Tips: Box colors will be sent at Random, we do not accept the specified color, thanks for your understanding.
Features:
* Blade has high strength and high toughness.
* Stable and durable, long use life.
* Great wear resistance and corrosion resistance.
* Mainly used for steel, stainless steel finishing and semi-finishing rough machining.
Specifications:
* Material: Tungsten Steel
* Color: Gold (As pictures show)
* Shape:Triangular
* Dimension: 16mm * 5mm * 4mm / 0.6 * 0.2 * 0.15 inch
Package contents:
10* Carbide Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Features:
This set of end mills are made from high quality tungsten carbide for good hardness and the cutting edge is quite sharp.
Single flute designed end mill with sharp cutting edge would offer a smooth cutting surface and chip clearing.
There are total 10 pieces end mills in this set that would be great replacement.
2mm cutting edge and 3.175mm standard shank diameter would fit for many milling machines or CNC cutting machines.
Can be used for cutting acrylic, PVC, MDF, density board, wood and many other soft materials.
Specification:
Material: Tungsten Carbide
Cutting Edge Diameter: 2mm(0.08")
Flute: 1
Shank Diameter: 3.175mm (1/8")
Cutting Edge Length: 8mm(0.31")
Overall Length: 39mm(1.53") (Approx)
Cutting On: Acrylic, PVC, MDF, density board, wood, etc
Quantity: 10pcs/kit
Package Contents:
10 * End Mills
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Steel Tool Post Holder 42-45 Kit Set Semi-finishing Lathe Practical New
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
SCLCL1010H06 CNC turning tool holder lathe cutter tool wrench 10X CCMT0602 carbide inserts.
Suitable for semi-finishing, finishing
To maintain tight tolerances unmatched performance.
Accessories steel is good, long service life, reducing the user cost of the tool.
High grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing.
User clamping and convenient way to replace, only a wrench to complete the replacement of the insert and pad.
Practical and a variety of processing environments, even in very dirty environments such as cast iron also has good features.
Perfect machining effect, perfect surface finish. High tensile strength and anti abrasion finish.
Specification:
Model: SCLCL1010H06
Material: Steel
Hardness: 42-45
Angle: 95 degree
Holder Size: 98 x 10 x 10mm(Approx.)
Insert Size: 6 x 6mm(Approx.)
Wrench Length: 82mm(Approx.)
Accept Inserts: CCMT0602 (10pcs)
Package Contents:
1 x SCLCL1010H06 Holder
10 x CCMT0602 Carbide Inserts
1 x Wrench
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Holder Lathe Turning Tool Grooving Insert Wrench MGEHR1010-2 Replacement Tool
Details:
High quality and brand new
Model: MGEHR1010-2
Shank Diameter: 10mm
Overall Length: 100mm
Insert: MGMN200
Package Contents:
1 * Holder
1 * Wrench
4 * Insert
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

ER32UM Wrench For Clamping Nut CNC Milling Lathe Precision Wrench High Quality
Details:
*100% Brand new and high quality
*Made of high quality material, more durable.
*ER32UM wrench for clamping nut CNC milling lathe precision wrench
*Standard ER32UM nut wrench
*Color: As Pictures Show
Package Content:
1*Wrench
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your

1XExternal Lathe Turning Holder MCLNR 1616H12 16*100mm Index For CNMG1204 Insert
Details:
Model: MCLNR 1616H12
Material: Carbon Steel
Direction: Right Hand
Tool Cutting Edge Angle: 95°
Square Shank (W*H): 16mm*16mm
Overall Length: 100mm
Package Contents:
1 * External Tool Holder
1 * "L" Type Wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Tungsten Carbide End Mill 4 Flute Shank Drill HRC50 Flat Bottom High Strength
Features:
* Coating with TIALN Can Cutting Harden materiel, 3 times Durable than Carbide.
* Good milling and cutting performance, ensure the high efficiency of the work.
* Sufficient bending strength and wear resistance, the surface is clean, neat and no glitches.
* High strength, resistance to bending, breakage resistance, long service life.
* Suitable for DIY, Home and General Building / Engineering Using.
Specifications:
* Material: Tungsten Carbide
* Highest cutting hardness: HRC50
* Flute: 4
* Total Length: 75mm / 2.95''
* Blade Length: 25mm / 0.98''
* Diameter of Head: 10mm / 0.39''
Package contents:
1* Straight Shank 4 flutes End Mill
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

4 flutes End Mill 75mm Length Flat Bottom HRC50 Useful Accessories High Quality
Features:
* Coating with TIALN Can Cutting Harden materiel, 3 times Durable than Carbide.
* Good milling and cutting performance, ensure the high efficiency of the work.
* Sufficient bending strength and wear resistance, the surface is clean, neat and no glitches.
* High strength, resistance to bending, breakage resistance, long service life.
* Suitable for DIY, Home and General Building / Engineering Using.
Specifications:
* Material: Tungsten Carbide
* Highest cutting hardness: HRC50
* Flute: 4
* Total Length: 75mm / 2.95''
* Blade Length: 25mm / 0.98''
* Diameter of Head: 10mm / 0.39''
Package contents:
1* Straight Shank 4 flutes End Mill
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

10Pcs Triangular Tungsten Gold Carbide Tips Inserts Tool TNMG 160404 With Box
Features:
Mainly used for general steel machining.
Fit for high hardness materials and cast iron.
Metal surface finishing, good wear resistance.
High strength, high toughness, stable and durable.
High quality and brand new.
Specification:
Material: Carbide
Blade Color: Golden (As Picture Show)
Dimension: 16*5mm
Quantity: 10pcs/kit
Machining Process: Finishing and semi-finishing
Package Contents:
10 * Blade
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Blade Tips Inserts 16*5mm Lathe Triangular Cutting Tools Golden Kit New Sale
Features:
Mainly used for general steel machining.
Fit for high hardness materials and cast iron.
Metal surface finishing, good wear resistance.
High strength, high toughness, stable and durable.
High quality and brand new.
Specification:
Material: Carbide
Blade Color: Golden (As Picture Show)
Dimension: 16*5mm
Quantity: 10pcs/kit
Machining Process: Finishing and semi-finishing
Package Contents:
10 * Blade
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

10 Pcs TNMG-160404 CNC Carbide Inserts Blades For Lathe Turning Boring Tool
Features:
Mainly used for general steel machining.
Fit for high hardness materials and cast iron.
Metal surface finishing, good wear resistance.
High strength, high toughness, stable and durable.
High quality and brand new.
Specification:
Material: Carbide
Blade Color: Golden (As Picture Show)
Dimension: 16*5mm
Quantity: 10pcs/kit
Machining Process: Finishing and semi-finishing
Package Contents:
10 * Blade
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

1pcs GH-36204M Holding Capacity Quick Release Push Pull Type Toggle Clamp Tool
Details:
*100% brand new and high quality
*Unique push/pull action Quick-Release Toggle Clamp, allows you to hold workpiece in a vertical position
Plastic cover Non-slip handle for easy, safe and comfortable operation
*Ideal for quickly holding down sheet metal or circuit boards, jigs for machine operation, welding, mould, woodworking, electronic equipment assembly, etc field
*Color: Red Silver (As Pictures Show)
*Size: As Pictures Show
*Model: GH-36204M
*Material: Iron / galvanized, others
*Size: 115*104mm(Approx.)
*Holding Capacity: 136kg / 299lbs
Package Contents:
1*Toggle Clamp
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Grip Toggle Clamp Replacement Push Pull Action Hand Tool GH-36204M Replace 1x
Details:
*100% brand new and high quality
*Unique push/pull action Quick-Release Toggle Clamp, allows you to hold workpiece in a vertical position
Plastic cover Non-slip handle for easy, safe and comfortable operation
*Ideal for quickly holding down sheet metal or circuit boards, jigs for machine operation, welding, mould, woodworking, electronic equipment assembly, etc field
*Color: Red Silver (As Pictures Show)
*Size: As Pictures Show
*Model: GH-36204M
*Material: Iron / galvanized, others
*Size: 115*104mm(Approx.)
*Holding Capacity: 136kg / 299lbs
Package Contents:
1*Toggle Clamp
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Wrench Carbide inserts APMT1604 DP5320 10pcs Shock resistant Indexable
Features:
*100% brand new and high quality
*Safety, good toughness and MTTiCN, thick Al2O3
*Carbide PVD coating of excellent combination; suitable for steel semi finishing
*Positive cutting action, lower cutting force and better tool life
*Mainly used for steel, stainless steel finishing and semi-finishing rough machining
*Good precision high toughness, high hard, wear-resistant, strong shock resistance
Specifications:
*Material: Metal
*Color: Gold(As Pictures Show)
*Size: Approx. 16x9x5mm
*Coatings: Carbide PVD
*Quantity: 10pcs
*Suitable for: 20 to 30 degrees machining steel parts
Package Contents:
10*Carbide Inserts CNC Nc Tool (packed with box)
1*Wrench
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

10Pcs/Set 25R0.8 Indexable Insert APMT1604 DP5320 Carbide Inserts CNC Nc Tool AU
Features:
*100% brand new and high quality
*Safety, good toughness and MTTiCN, thick Al2O3
*Carbide PVD coating of excellent combination; suitable for steel semi finishing
*Positive cutting action, lower cutting force and better tool life
*Mainly used for steel, stainless steel finishing and semi-finishing rough machining
*Good precision high toughness, high hard, wear-resistant, strong shock resistance
Specifications:
*Material: Metal
*Color: Gold(As Pictures Show)
*Size: Approx. 16x9x5mm
*Coatings: Carbide PVD
*Quantity: 10pcs
*Suitable for: 20 to 30 degrees machining steel parts
Package Contents:
10*Carbide Inserts CNC Nc Tool (packed with box)
1*Wrench
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

HSS 25mm 60° Dovetail Cutters End Mill High Speed Steel Craving Milling Tools
Details:
*100% brand new and high quality
* Made of high-speed steel
* 60 Degree angle, right hand cutting
* Cutting diameter: 25mm
* Handle diameter: 12 mm
Package Contents:
1*End Mill
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Dovetail Cutter End Mill HSS 25mm Engraving Drill Bit Metalworking Tools Replace
Details:
*100% brand new and high quality
* Made of high-speed steel
* 60 Degree angle, right hand cutting
* Cutting diameter: 25mm
* Handle diameter: 12 mm
Package Contents:
1*End Mill
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Cutter End Mill Tool Replacement Drilling Engraving Metalworking Shank
Details:
*100% brand new and high quality
* Made of high-speed steel
* 60 Degree angle, right hand cutting
* Cutting diameter: 25mm
* Handle diameter: 12 mm
Package Contents:
1*End Mill
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

4PCS MG996R 55g Metal Gear Torque Digital Servo 15KG For RC Helicopter Car Robot
4PCS MG996R 55g Metal Gear Torque Digital Servo 15KG For RC Helicopter Car Robot
Product description:
Name: MG996R Digital Servo
Working speed: 0.17 seconds / 60 degrees (4.8V no load)
Working speed: 0.13 seconds / 60 degrees (6.0V no load)
Stall torque: 13 kg-cm (180.5 oz-in) at 4.8V
Stall torque: 15 kg-cm (208.3 oz-in) at 6V
Working voltage: 4.8-7.2V
Gear type: all metal gear
Connection cable: 11.81 inches (300 mm)
Dimensions: 40 x 19 x 43mm
Weight: 55 grams
Colour: Black
Receiver connectors that meet most standards: Hitec, Sanwa, GWS, etc...
Very suitable for trucks, ships, racing cars, helicopters and airplanes.
Power supply: through an external adapter.
Stable and shockproof
Double ball bearing
Package list:
4 *Servo
4 *Servo parts
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Cutter Spiral bit Set Single Flute Router Engraving Drill Kit 1/8" 2mm
Features:
This set of end mills are made from high quality tungsten carbide for good hardness and the cutting edge is quite sharp.
Single flute designed end mill with sharp cutting edge would offer a smooth cutting surface and chip clearing.
There are total 10 pieces end mills in this set that would be great replacement.
2mm cutting edge and 3.175mm standard shank diameter would fit for many milling machines or CNC cutting machines.
Can be used for cutting acrylic, PVC, MDF, density board, wood and many other soft materials.
Specification:
Material: Tungsten Carbide
Cutting Edge Diameter: 2mm(0.08")
Flute: 1
Shank Diameter: 3.175mm (1/8")
Cutting Edge Length: 8mm(0.31")
Overall Length: 39mm(1.53") (Approx)
Cutting On: Acrylic, PVC, MDF, density board, wood, etc
Quantity: 10pcs/kit
Package Contents:
10 * End Mills
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Cutter Spiral bit CNC Single Flute Engraving Shanks Drill Kit 1/8" 2mm
Features:
This set of end mills are made from high quality tungsten carbide for good hardness and the cutting edge is quite sharp.
Single flute designed end mill with sharp cutting edge would offer a smooth cutting surface and chip clearing.
There are total 10 pieces end mills in this set that would be great replacement.
2mm cutting edge and 3.175mm standard shank diameter would fit for many milling machines or CNC cutting machines.
Can be used for cutting acrylic, PVC, MDF, density board, wood and many other soft materials.
Specification:
Material: Tungsten Carbide
Cutting Edge Diameter: 2mm(0.08")
Flute: 1
Shank Diameter: 3.175mm (1/8")
Cutting Edge Length: 8mm(0.31")
Overall Length: 39mm(1.53") (Approx)
Cutting On: Acrylic, PVC, MDF, density board, wood, etc
Quantity: 10pcs/kit
Package Contents:
10 * End Mills
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Boring Bar Carbide Inserts Stainless steel Industrial Parts Lathe Holder Useful
Details:
*100% brand new and high quality
*Suitable For: Semi-finishing, finishing
*High grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing;
*To maintain tight tolerances unmatched performance;
*Practical and a variety of processing environments, even in very dirty environments such as cast iron also has good features;
*User clamping and convenient way to replace, only a wrench to complete the replacement of the blade and pad;
*Accessories steel is good, long life, reducing the user cost of the tool.
*Material: Stainless steel
*Model: MGEHR1616-3
*Insert: MGMN300
*Color: as picture shows
*Overall length: approx. 100mm/4 inch
*Wrench length: approx. 65mm
*Insert length: approx. 18mm
Package Contents:
1*MGEHR1616-3 Holder
1*Wrench
4*Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Equipment Milling Wrench Tools Lathe Precision Workholding Metalworking
Details:
*100% Brand new and high quality
*Made of high quality material, more durable.
*ER32UM wrench for clamping nut CNC milling lathe precision wrench
*Standard ER32UM nut wrench
*Color: As Pictures Show
Package Content:
1*Wrench
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your

1 X Standard ER32UM Nut Wrench For Clamping Nut CNC Milling Lathe Precision USA
Details:
*100% Brand new and high quality
*Made of high quality material, more durable.
*ER32UM wrench for clamping nut CNC milling lathe precision wrench
*Standard ER32UM nut wrench
*Color: As Pictures Show
Package Content:
1*Wrench
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your

Blade Tips Inserts 16*5mm Lathe Carbide Triangular Golden TNMG 160404 Kit Part
Features:
Mainly used for general steel machining.
Fit for high hardness materials and cast iron.
Metal surface finishing, good wear resistance.
High strength, high toughness, stable and durable.
High quality and brand new.
Specification:
Material: Carbide
Blade Color: Golden (As Picture Show)
Dimension: 16*5mm
Quantity: 10pcs/kit
Machining Process: Finishing and semi-finishing
Package Contents:
10 * Blade
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Accessory End Mill Universal For Stainless Steel Tungsten Mill Milling
Item Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* It can roughen and finish the heat-treated materials below 65 degrees, which reduces the number of tool changes. Improves machine tool productivity. Saves production time
* 8mm HRC65 ° 4F nano tungsten carbide end mill for stainless steel
* Flute Length: 20mm(Approx.)
* Color: As pictures show
* Quantity: 1
Package Contents:
1*Milling Cutter
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10pcs 1/8" Shank 2 Flutes Straight Slot Carbide End-Mill Cutter CNC Router-Bit
Details:
100% brand new, high quality
A wide range of materials can be engraved, including: Multilayer board, MDF, foam, plywood etc
Material: Solid Carbide
Number of Flutes: 2 straight flute
Shank Diameter: 3.175mm/1/8 inch (Approx)
Cutting Edge Diameter: 3.175mm
Cutting Edge Length: 20mm
Total Length: 40mm
Package Contents:
10 * Straight Slot CNC Router Bits
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

1pcs Dovetail Cutter End Milling Shank HSS 60Degree Engraving Metalworking 25mm
Details:
*100% brand new and high quality
* Made of high-speed steel
* 60 Degree angle, right hand cutting
* Cutting diameter: 25mm
* Handle diameter: 12 mm
Package Contents:
1*End Mill
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Spiral Bit Engraving Shanks Milling Drill Kit 10pcs 1/8 2mm Carbide End Mill
Features:
This set of end mills are made from high quality tungsten carbide for good hardness and the cutting edge is quite sharp.
Single flute designed end mill with sharp cutting edge would offer a smooth cutting surface and chip clearing.
There are total 10 pieces end mills in this set that would be great replacement.
2mm cutting edge and 3.175mm standard shank diameter would fit for many milling machines or CNC cutting machines.
Can be used for cutting acrylic, PVC, MDF, density board, wood and many other soft materials.
Specification:
Material: Tungsten Carbide
Cutting Edge Diameter: 2mm(0.08")
Flute: 1
Shank Diameter: 3.175mm (1/8")
Cutting Edge Length: 8mm(0.31")
Overall Length: 39mm(1.53") (Approx)
Cutting On: Acrylic, PVC, MDF, density board, wood, etc
Quantity: 10pcs/kit
Package Contents:
10 * End Mills
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Accuracy Insert 10Pcs Tool Steel Cut-Off Parting Holder MGMN300-M NC3020 Pro
Details:
* These inserts have high strength, high toughness and good wear resistance.
* Cutting fast, accuracy and stability.
* They are stable and durable.
* Models: MGMN300-M NC3020
* Quantity: 10Pcs
Package contents:
10* Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Accuracy Insert Wide Blade Steel Cut-Off Parting Holder MGMN300-M NC3020 Pro
Details:
* These inserts have high strength, high toughness and good wear resistance.
* Cutting fast, accuracy and stability.
* They are stable and durable.
* Models: MGMN300-M NC3020
* Quantity: 10Pcs
Package contents:
10* Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

3mm Insert Grooving Cutting Turning Accuracy Wide Blade Cut-Off New Part
Details:
* These inserts have high strength, high toughness and good wear resistance.
* Cutting fast, accuracy and stability.
* They are stable and durable.
* Models: MGMN300-M NC3020
* Quantity: 10Pcs
Package contents:
10* Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Carbide Insert Turning Tool Grooving Cutting Wide Blade Cut-Off Newest
Details:
* These inserts have high strength, high toughness and good wear resistance.
* Cutting fast, accuracy and stability.
* They are stable and durable.
* Models: MGMN300-M NC3020
* Quantity: 10Pcs
Package contents:
10* Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Grinding Inserts Box Packed Edges CCMT CCGT CCGW CNC Non-ferrous metals
Item Details:
*100% brand new and high quality
*Better smoothness
*Fully fine grinding of the surrounding surface
*Sharp edges for easier cutting
*More durable
*For processing non-ferrous metals such as aluminum, copper, etc
*Model: CCMT CCGT CCGW
Package Contents:
10*Cutters(Box-packed)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Box Inserts Packed Edges CNC For metalworking Processing 10pcs CCMT CCGT CCGW
Item Details:
*100% brand new and high quality
*Better smoothness
*Fully fine grinding of the surrounding surface
*Sharp edges for easier cutting
*More durable
*For processing non-ferrous metals such as aluminum, copper, etc
*Model: CCMT CCGT CCGW
Package Contents:
10*Cutters(Box-packed)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Replacement End Mill Universal For Stainless Steel Carbide End Durable
Item Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* It can roughen and finish the heat-treated materials below 65 degrees, which reduces the number of tool changes. Improves machine tool productivity. Saves production time
* 8mm HRC65 ° 4F nano tungsten carbide end mill for stainless steel
* Flute Length: 20mm(Approx.)
* Color: As pictures show
* Quantity: 1
Package Contents:
1*Milling Cutter
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Holder Boring Bar Threading For 16IR CNC INSERT SNR0016Q16 Latest Gift
Details:
Condition: 100% brand new
Model: SNR0016Q16
Shank Diameter: 16mm
Overall Length: 180mm
Min.Bore: 19mm
Direction: Right
Accept Insert: 16 IR
Insert I.C: 3/8"
Package Contents:
1 * Holder
1 * Wrench
(Insert not included)
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

8pcs Carbon Steel Silver ER11 1-7mm Spring Collets With Extension Rod Equipment
Features:
* This kit includes a shank extension rod and 7 spring collets.
* 100% Brand new and high quality.
* The shank extension rod allows you to do deep hole processing.
* A perfect replacement for the old or worn one.
* Extension rod is designed to eliminate unbalance and increase safety during cutting and milling.
* It is widely used in boring, milling, drilling, tapping, grinding and other processing.
Specifications:
* Total height: Approx. 18mm
* Outer diameter(Max): Approx. 11.5mm
* Gripping range: 1~7MM (1mm,2mm,3mm,4mm,5mm,6mm,7mm)
* Fits metric shank size(s): For example,1mm Collets Fits 1mm metric shank,2mm Collets Fits 2mm metric shank.
* Material: High Grade 45 Carbon Steel
* Color: Silver(as pictures show)
Package contents:
1* 8pcs Spring Collets & Extension Rod Kit
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

12pc 12mm Shank Lathe Boring Bar Turning Tool Holder DCMT0702 Carbide Blade Part
Features:
User clamping and convenient to replace, only a wrench to complete the replacement of the cutter blade and pad.
High strength and hardness, durable in use.
High grip strength and impact resistance.
Clear speed advantage in cutting off a large margin and processing.
Suitable for semi-finishing, finishing.
High quality and brand new.
Specification:
Model: S12M-SDUCR07
Material: Steel
Blade Shank: 12mm (Approx)
Shank Length: 150 mm (Approx)
Wrench: T8
Accept Inserts: DCMT0702 (10pcs)
Package Contents:
1 * S12M-SDUCR07 Turning Tool Holder
1 * T8 Wrench
10 * DCMT0702 Blade
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Practical Tool Turning Replaces S12M-SDUCR07 Bar Holder Useful Durable
Features:
User clamping and convenient to replace, only a wrench to complete the replacement of the cutter blade and pad.
High strength and hardness, durable in use.
High grip strength and impact resistance.
Clear speed advantage in cutting off a large margin and processing.
Suitable for semi-finishing, finishing.
High quality and brand new.
Specification:
Model: S12M-SDUCR07
Material: Steel
Blade Shank: 12mm (Approx)
Shank Length: 150 mm (Approx)
Wrench: T8
Accept Inserts: DCMT0702 (10pcs)
Package Contents:
1 * S12M-SDUCR07 Turning Tool Holder
1 * T8 Wrench
10 * DCMT0702 Blade
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

DCMT0702 Turning Tool Insert T8 Wrench Part Practical Bar High Quality
Features:
User clamping and convenient to replace, only a wrench to complete the replacement of the cutter blade and pad.
High strength and hardness, durable in use.
High grip strength and impact resistance.
Clear speed advantage in cutting off a large margin and processing.
Suitable for semi-finishing, finishing.
High quality and brand new.
Specification:
Model: S12M-SDUCR07
Material: Steel
Blade Shank: 12mm (Approx)
Shank Length: 150 mm (Approx)
Wrench: T8
Accept Inserts: DCMT0702 (10pcs)
Package Contents:
1 * S12M-SDUCR07 Turning Tool Holder
1 * T8 Wrench
10 * DCMT0702 Blade
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Packed Inserts Edges Cutter CCMT CCGT CCGW Grinding Processing Practical
Item Details:
*100% brand new and high quality
*Better smoothness
*Fully fine grinding of the surrounding surface
*Sharp edges for easier cutting
*More durable
*For processing non-ferrous metals such as aluminum, copper, etc
*Model: CCMT CCGT CCGW
Package Contents:
10*Cutters(Box-packed)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

10x CCGT060204-AK Insert CNC End Mill Cutters For Metal Copper Supplies Tools
Item Details:
*100% brand new and high quality
*Better smoothness
*Fully fine grinding of the surrounding surface
*Sharp edges for easier cutting
*More durable
*For processing non-ferrous metals such as aluminum, copper, etc
*Model: CCMT CCGT CCGW
Package Contents:
10*Cutters(Box-packed)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Set Thread Tap Supplies CNC Screw Repair Kit Metal Right Hand Adjustable
Details:
New HSS 5/8"-24 UNEF Right Hand Thread Tap and Die Set(5/8x24)
Both are right hand thread.
5/8" - 24 UNEF right hand tap and die set.
For 5/8"-24 gunsmithing muzzle threading tap and die set.
High quality and brand new.
Package Contents:
1 * 5/8" - 24 Tap
1 * 5/8" - 24 Die
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.