Fémmegmunkáló kellékek

Grinding Sanding wheels Lock Abrasive Metalworking Supplies Industrial
Features:
*100% brand new and high quality
*GET MORE CUTTING POWER: The ABN 2-Inch Angle Grinder Flap Disc 80 Grit Grinding Wheel 10-Pack is a flap wheel kit that is a blend of zirconia and aluminum oxide grain that allows the die grinder sanding disc to self-sharpen for a more powerful, abrasive cut on carbon and mild steel applications
*REDUCE VIBRATIONS: One-sided zirconia flap disc constructed from resin fiber with a fiberglass backing plate to offer extra strength and absorb vibrations without smudges or smears during use; Grinding disc is semi-open to reduce loading on aluminum surfaces
*80 GRIT TO REMOVE HEAVIER STOCK: Angle grinder sanding wheel is designed for working on flat surfaces; These 40 grit flap disc wheels are coarser in build to easily remove heavier stock, smoothing out or blending autobody paint, deburring, removing rust, leveling, stripping, buffing, light grinding, and prepping or finishing flat work surfaces such as stainless steel, aluminum, and non-ferrous metal; Avoid forcefully pushing down on flap disk to prevent wear or damage
Specifications:
*Color: Dark Blue (As Pictures Show)
*Material: a mixture of zirconia and alumina particles
*Total diameter (Approx.): 2 inches (50 mm)
*1/4" (6mm) shoulder shaft
*Maximum speed 12000 to 14000 rpm
Package Contents:
10*Sanding wheels
1*Holder
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

1 X 11/32 Inch - 48 HSS High Speed Steel Right Hand Thread Tap Tool 11/32-48 TPI
Item Details:
100% brand new and high quality
Made of high quality material, durable and practical to use
Model: 11/32" - 48
Direction: Right Hand
Material: High Speed Steel
Main Color: Silver (As pictures show)
Package Contents:
1*Tap
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Replacement Tap Set Metalworking CNC Right Hand Thread High Speed Steel
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*New HSS 20mm x 1.5 metric taper and plug right-hand thread M20 x 1.5mm pitch
*Material: High Speed Steel
*Total Length: 86mm(Approx.)
*Quantity: 2
*Color: As pictures show
Package Contents:
2 * Taps
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Tap Die TPI UNEF HSS Hand Tool 1/2" 28 TPI (Thread-Per-Inch) UNEF High quality
Item Details:
100% brand new and high quality
Made of high quality material, durable and practical to use
Add an extremely hard surface to the tool and prolong it's life by 3 times. Rust free
Die Dimension: 1-1/2" Outer Diameter
Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
Titanium Nitride Coated Tap & Die:
Package Contents:
1x 1/2x28 Tap
1x 1/2x28 Die
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

1/2x28 Tap Die Right 2pc 2x 2* Set Kit TPI UNEF Hand Thread Practical
Item Details:
100% brand new and high quality
Made of high quality material, durable and practical to use
Add an extremely hard surface to the tool and prolong it's life by 3 times. Rust free
Die Dimension: 1-1/2" Outer Diameter
Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
Titanium Nitride Coated Tap & Die:
Package Contents:
1x 1/2x28 Tap
1x 1/2x28 Die
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Milling Cutter Tools 1/8-1/2 inch Drill Bit High Speed Steel Equipment
Details:
*100% brand new and high quality
*Including 6pc,measures in 1/2" 3/8" 5/16" 3/16" 1/4" 1/8", for aluminum milling, various woodworking needs
*Quality high speed steel, sharp enough to drill into solid material, sufficient bending strength and wear resistance, no glitches
*Work well in soft wood and cut clean. Can be applied to cut carbon steel, mild steel, alloy steel, cast iron, titanium, aluminum and polycarbonate
*The edge of end mill bit is hard and sharp, will reduce changing times and ensure the high efficiency of the work
*Color: Silver (As Pictures Show)
*Material: High Speed Steel (HSS)
*Cutting Diameter (Approx.): 1/2" 3/8" 5/16" 3/16" 1/4" 1/8"
001: 1/2x1/2; Cutting Diameter:1/2", Cutting Depth:40mm ; Shank Diameter:1/2'';
002: 1/4x1/4; Cutting Diameter:1/4''; Cutting Depth:1'' ; Shank Diameter:1/4'';
003: 3/8x3/8; Cutting Diameter:3/8''; Cutting Depth:32mm ; Shank Diameter:3/8'';
004: 3/16x1/4; Cutting Diameter:3/16''; Cutti ng Depth:4/5'' ; Shank Diameter:1/4'';
005: 5/16x5/16; Cutting Diameter:5/16''; Cutting Depth:1'' ; Shank Diameter:5/16'';
006: 1/8x1/4; Cutting Diameter:1/8''; Cutting Depth:3/4'' ; Shank Diameter:1/4''
Package Size: 16 x 11 x 2cm/6.30 x 4.33 x 0.79 in (L x W x H)
Package Contents:
6*Milling Cutter Tools
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Assembly Flap Sanding Discs Industrial Tool Supplies Polishing Grinding
Details:
*100% brand new and high quality
*2" Flap Sanding Disc, double zirconium abrasive powers through tough materials.
*Great for a wide variety of applications including dust removal, deburring, snagging, flash removal, and light grinding.
*Use on auto body panels, hard or soft woods, ferrous or non-ferrous metals, or other composites.
*Application: stainless steel, aluminum, timber, plastic ware, etc.
*Usage:Grinding, polishing, rust removing, etc.
*Color: Blue (As Pictures Show)
*Material: Zirconia
*Diameter: 50 mm / 2 inch (Approx.)
*Grit: 80 #
Package Contents:
10*Flap Sanding Discs
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

End Mill Metalworking Carbide Engraving Flat Bottom Extension Practical
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Color: Blue Silver (As pictures show)
*Material: Carbide
*Coating: Nitrogen Coating
*Head Diameter: d = 2, 3, 4, 5, 6 mm(Approx.)
*Rod Diameter: D = 4, 4, 4, 6, 6mm(Approx.)
*Wing Length: L1=6,8,11,13,16mm(Approx.)
*Full Length: L=50, 50, 50, 50, 50mm(Approx.)
*Maximum Cutting Hardness: HRC50
Package Contents:
5pcs/Set Carbide End Mill
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Silver Milling cutter Tungsten steel Cutting Spiral Engraving Slotting
Details:
*100% brand new and high quality
*High precision grind by imported machine tools;
*Unique finish polish, sharp cutting edge;
*High durability, not easy to break;
*Combine single-edge excellent removing and spiral cutting, can greatly increase cutting speed while ensuring quality.
*Suitable Materials:
Acrylic, PVC, MDF, high-density board, lotus board,Solid wood, wood, plastic plate, double color sheet, etc.
*Application: Cutting, engraving, slotting, milling, and so on, such as hollow cut.
*Color: Silver (As Pictures Show)
*Material: Tungsten steel
*Diameter (Approx.): 0.125 inch / 0.16 inch / 0.24 inch / 0.32 inch (3.175mm / 4mm / 6mm / 8mm);
*Total length 50mm, blade length 22mm, shank diameter 3.175mm (Approx.)
Package Contents:
10*Single flute milling cutter
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Features:
* 100% brand new and high quality
* Made of high quality carbon steel with high hardness, durable and practical to use
* Strong cutting ability, high precision and long life.
* The cutter is clear, sharp and durable.
* After heat treatment, the hardness is stable.
* Application: It can process stainless steel, ordinary steel, iron, die steel, copper, aluminum, etc.
Specification:
* Material: High Carbon Steel.
* Accuracy: H8.
* Edge Diameter (mm): 3, 4, 5, 6, 8
* Flute Length (mm): 21, 27, 31, 34, 45
* Tool Holder Diameter (mm): 3, 4, 5, 6, 8
* Total Length (mm): 61,74,83,91,112
* Number Of Flutes: 6,6,6,6,6
Package Contents:
5*M3 to M8 Machine Reamer
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Drill Bits Metric H8 Equipment M3 M4 M5 M6 M8 Hand Reamer Milling Cutter
Features:
* 100% brand new and high quality
* Made of high quality carbon steel with high hardness, durable and practical to use
* Strong cutting ability, high precision and long life.
* The cutter is clear, sharp and durable.
* After heat treatment, the hardness is stable.
* Application: It can process stainless steel, ordinary steel, iron, die steel, copper, aluminum, etc.
Specification:
* Material: High Carbon Steel.
* Accuracy: H8.
* Edge Diameter (mm): 3, 4, 5, 6, 8
* Flute Length (mm): 21, 27, 31, 34, 45
* Tool Holder Diameter (mm): 3, 4, 5, 6, 8
* Total Length (mm): 61,74,83,91,112
* Number Of Flutes: 6,6,6,6,6
Package Contents:
5*M3 to M8 Machine Reamer
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Equipment End Mill 10mm 3 Flute CNC Cutter For Aluminum CAE3-10X10 L72mm
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Aluminum straight shank carbide end mill / milling cutter
*Model: CAE3-10X10 L72mm HRC45
*Material: Carbide
*Number of Flutes: 3
*Head Diameter: d = 10mm(Approx.)
*Tool Holder Diameter: D = 10mm(Approx.)
*Flute Length: L1 = 22mm(Approx.)
*Full Length: L = 72mm(Approx.)
*Maximum Cutting Hardness: 45HRC
*Certificate: ISO
*Applicable Materials: Aluminum
Package Contents:
1 * Drill Bit
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10PCS 1/8'' Single-edge Flat Nose Spiral Carbide End Mill CNC Router Bits 2mm
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*This is a set of single-edge end mill cutting tools for industrial milling applications
*It is different from drills in application, geometry and manufacturing. Single flute end mills are used for excellent chip removal in high milling
*These end mills are made of tungsten carbide and can withstand more heat while still maintaining good hardness
*This set of end mills is made of high-quality tungsten carbide, with good hardness, and the cutting edge is quite strong
*A cutting edge of 2 mm and a standard shank diameter of 3.175 mm will fit many milling machines or CNC cutting machines
*Single flute design end mills with grooves provide cutting surface and chip removal
*There are a total of 10 end mills in this kit, which will be a good substitute
*Usually these end mills are used to cut acrylic, PVC, MDF, density board, wood and many other soft materials
Specifications:
*Material: Tungsten carbide
*Blade diameter: 2mm (0.08")
*Number of blades: 1
*Shank diameter: 3.175 mm (1/8 inch)
*Blade length: 8mm (0.31")
*Total length: about 39 mm (1.53")
*Cutting: Acrylic, PVC, MDF, MDF, wood, etc.
*Quantity: 10
Package Contents:
10 *End mill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

10pcs Nano Blue Coat End Mill CNC Router Bits 1.5-3.175mm 1/8" Metalworking Tool
Description:
*Hard Steel: With sufficient flexural strength and wear resistance, which ensure high work efficiency.
*Material: Using ultra-fine grained carbide material, with good milling and cutting performance.
*Advantage: Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
*Application: PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, and other precision parts processing.
Nano Blue Coat End Mill CNC Router Bits Set
Specifications:
Cutting Edge Diameter: 1.5-3.175mm (1.5/1.6/1.7/1.8/2.0/2.2/2.4/2.5/3.0/3.175mm), 10Pcs.
Shank Diameter: 3.175mm.
Cutting Edge Length: 12mm.
Overall Length: 37mm.
Wide Application
Suitable for PCB, SMT, CNC, MDF, ABS, PVC, Mold, acrylic, nylon, resin, plastic fiber, carbon fiber, density board, hardwood, plywood, printed circuit board, and other precision parts processing and milling.
Package Contents:
10*Router Drill Bits
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Metal End Mill Cutter 3/4Inch Router Straight Shank CNC HSS 4 Flutes Useful
Item Details:
*3/4" 4 Flutes HSS High-speed Steel Straight Shank CNC End Mill Cutter Router Bit
*4 flutes solid carbide coated end mills
*Fits for metals with above 30 degrees hardness
*100% brand new and high quality
*Material: HSS
*Cutting Diameter: 3/4" (Approx.)
*Shank Diameter: 3/4" (Approx.)
Package Contents:
1*End Mill Cutter
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

3/4 Carbide End Mill 4 Flute HSS Straight Shank CNC Milling Cutter Tool Useful
Item Details:
*3/4" 4 Flutes HSS High-speed Steel Straight Shank CNC End Mill Cutter Router Bit
*4 flutes solid coated end mills
*Fits for metals with above 30 degrees hardness
*100% brand new and high quality
*Material: HSS
*Cutting Diameter: 3/4" (Approx.)
*Shank Diameter: 3/4" (Approx.)
Package Contents:
1*End Mill Cutter
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Thread Tap die tool Set M14x1.25 mm Left Hand Metric Equipment Practical
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*HSS M14 x 1.25 mm Left Hand Tap & Die Metric Thread Set
*Size: M14 X 1.25mm
*Direction: left hand
*Material: HSS (M2)
Package Contents:
1*Die
1*Tap
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Right Hand Thread tap die Tap Die Set Machine Wrench Parts Kit UNEF Set
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* High hardness and durability
* Mold can be mounted on the mold wrench or manually machined
* Installed on the mold base on the machine
* Titanium nitride coating: Add an extremely hard surface to the tool
* Extend its life by 3 times. No rust
* Suitable for mold processing
Specifications:
* Material: High Speed Steel
* Color: Silver Gold(As pictures show)
* Mold Size: 1-1 / 2" Outer Diameter
* Thread size: 1/2", 28 TPI (thread per inch) UNEF
* Thread mold size: 38mmx10mm(Approx.)
* Thread tapping size: 88mmx10mm (Approx.)
Package Contents:
1*1 / 2-28 Titanium Coated Thread Tap
1*1 / 2-28 Round Thread Mould
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Right Hand Thread tap die Plug Supplies M14x1.25 14mmx1.25mm Useful New
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* M14 x 1.25 HSS metric right-hand thread tap and die set 14mm x 1.25mm pitch
* High speed steel (HSS) has good wear resistance and can be used for general purposes of ferrous and non-ferrous materials.
* Provides a smooth, polished surface on the tool.
Specification:
* Model / Size: M14x1.25
* Thread Diameter (D): 14mm.(Approx.)
* Spacing (P): 1.25mm.(Approx.)
* Thread Type: Metric.
* Tap Material: HSS
* Die Material: Alloy Tool Steel.
* Cutting Direction: Right Hand.
* Flute Type: Straight.
Package Contents:
1 *Metric Right-Hand Tap
1 *Die
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

2pcs Aluminum Single Flute Spiral Solid Carbide End Mills Drill Cutter Tools Set
Details:
*100% brand new and high quality
*Material: High-quality Micro Grain Tungsten Steel Solid Carbide
*Type: Single Flute Spiral Solid Carbide End mills
*Cutting Diameter: 6mm (Approx.)
*Flute Length: 22mm (Approx.)
*Shank Diameter: 6mm (Approx.)
*Overall Length: 50mm (Approx.)
*Best Suitable Material: Aluminum
*Fit for below materials:
(1) MDF, particle board, board with lagging, log, affixed to the skin panels;
(2) Acrylic, PVC, resin, plastic, chipboard, composite board, melamine board;
(3) Solid wood, native wood, plywood, lotus plate;
Package Contents:
2*End Mills
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

HSS 1/4-18 NPT Tap & Mold Right Hand Set Kit Metalworking Tool Parts Practical
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*1pc HSS 1/4-18 NPT tap and 1/4-18 NPT mold right hand
*Color: Silver(As pictures show)
*Quantity: 1
Package Contents:
1*HSS 1/4-18 NPT Tap And 1/4-18 NPT Mold Right Hand
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Thread tap Die 1/4-18 NPT Set Metalworking Silver Handtool Equipment New
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*1pc HSS 1/4-18 NPT tap and 1/4-18 NPT mold right hand
*Color: Silver(As pictures show)
*Quantity: 1
Package Contents:
1*HSS 1/4-18 NPT Tap And 1/4-18 NPT Mold Right Hand
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Steel End Mill Cutter Milling Accessory Parts Universal R0.5*D6*30.5*75L
1pcs R0.5 * D6 * 30.5 * 75L 2 Flute HRC55 Taper Ball Nose End Mill For CNC Tool
Features:
100% brand new and high quality
Made of high-quality materials, durable
High quality tungsten steel taper taper ball end mill with 2 blades.
Tapered ball end mill/cone milling cutter.
Long lasting.
Applicable processing: hardwood parts of iron and other steel parts.
Product parameters:
Material: Tungsten steel
Surface treatment: coating
Number of blades: 2 blades
Radius: about 0.5mm (0.020 inch)
Tool handle diameter: about 6mm (0.24")
Cutting length: about 30.5mm (1.2 inches)
Full length: about 75 mm (2.96 inches)
Single angle: about B = 4.68°
Processing material HRC:0~55°
Package Included:
1 *Milling cutter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Tap Equipment 2Pcs Right Hand Thread High Speed Steel M20x1.5mm Useful
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*New HSS 20mm x 1.5 metric taper and plug right-hand thread M20 x 1.5mm pitch
*Material: High Speed Steel
*Total Length: 86mm(Approx.)
*Quantity: 2
*Color: As pictures show
Package Contents:
2 * Taps
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Spiral End Mill Cutter Bit Silver Set Flute Cutting Accessory Practical
Features:
Excellent edge-grinding technology.
Long service life, not easy to break, precise.
Sharp cutting edge smoke-free clean, good chip, high durability, cutting out text and other smooth,no burr.
High quality and brand new.
Specification:
Material: Carbide
Color: Silver (As Picture Show)
Blade Diameter: 3.175 mm
Shank Diameter: 3.175 mm
Blade Length: 25 mm
Tool Uses: Mainly applied to cut acrylic, organic board MDF wood and other materials
Carving Way: Cutting
Dimension: 3.175*40mm/0.13*1.57"(L*Dia)
Package Contents:
10 * Single Flute Spiral End Mill Cutter Bit
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

10pcs End Mill Spiral Cutter Bit Carbide Silver Replacement Tool Kit Set
Features:
Excellent edge-grinding technology.
Long service life, not easy to break, precise.
Sharp cutting edge smoke-free clean, good chip, high durability, cutting out text and other smooth,no burr.
High quality and brand new.
Specification:
Material: Carbide
Color: Silver (As Picture Show)
Blade Diameter: 3.175 mm
Shank Diameter: 3.175 mm
Blade Length: 25 mm
Tool Uses: Mainly applied to cut acrylic, organic board MDF wood and other materials
Carving Way: Cutting
Dimension: 3.175*40mm/0.13*1.57"(L*Dia)
Package Contents:
10 * Single Flute Spiral End Mill Cutter Bit
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Parts End Mill Single Flute Spiral Bit Carbide Silver Durable Practical
Features:
Excellent edge-grinding technology.
Long service life, not easy to break, precise.
Sharp cutting edge smoke-free clean, good chip, high durability, cutting out text and other smooth,no burr.
High quality and brand new.
Specification:
Material: Carbide
Color: Silver (As Picture Show)
Blade Diameter: 3.175 mm
Shank Diameter: 3.175 mm
Blade Length: 25 mm
Tool Uses: Mainly applied to cut acrylic, organic board MDF wood and other materials
Carving Way: Cutting
Dimension: 3.175*40mm/0.13*1.57"(L*Dia)
Package Contents:
10 * Single Flute Spiral End Mill Cutter Bit
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

CNC End Mill Mold Carving Supplies Burrs 3.175mm shank Milling Durable
Details:
*100% brand new and high quality
*The use of ultra-fine grained cemented carbide materials has good milling and cutting performance to ensure high work efficiency
*Sufficient flexural strength and abrasion resistance
*Milling grooves, holes and plate edges, the surface is clean, neat and burr-free
*Processing scope: PCB, SMT, CNC, mold, carving, plastic, copper, stainless steel and other hardware processing
*Color: Blue (As Pictures Show)
*Material: Carbide
*Specification (Approx.):
Diameter: 0.8mm, blade length: 3.5mm
Diameter: 0.9mm, blade length: 4.5mm
Diameter: 1.0mm, blade length: 5.5mm
Diameter: 1.1mm, blade length: 6.0mm
Diameter: 1.2mm, blade length: 7mm
Diameter: 1.3mm, blade length: 8mm
Diameter: 1.4mm, blade length: 8mm
Diameter: 1.5mm, blade length: 8mm
Diameter: 1.6mm, blade length: 7mm
Diameter: 1.8mm, blade length: 8mm
Diameter: 2.0mm, blade length: 8mm
Diameter: 2.4mm, blade length: 8mm
Diameter: 2.5mm, blade length: 7mm
Diameter: 3.0mm, blade length: 8mm
Diameter: 3.175mm, blade length: 8mm
*Shank diameter: 3.175 mm full length: ± 38mm (Approx.)
*Optional types: 0.6mm-1.5mm, 0.8mm-3.175mm, 1.5mm-3.175mm (Approx.)
Package Contents:
10*End Mill
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

CNC End Mill Mold Carving Supplies Burrs 3.175mm shank Milling Durable
Details:
*100% brand new and high quality
*The use of ultra-fine grained cemented carbide materials has good milling and cutting performance to ensure high work efficiency
*Sufficient flexural strength and abrasion resistance
*Milling grooves, holes and plate edges, the surface is clean, neat and burr-free
*Processing scope: PCB, SMT, CNC, mold, carving, plastic, copper, stainless steel and other hardware processing
*Color: Blue (As Pictures Show)
*Material: Carbide
*Specification (Approx.):
Diameter: 0.8mm, blade length: 3.5mm
Diameter: 0.9mm, blade length: 4.5mm
Diameter: 1.0mm, blade length: 5.5mm
Diameter: 1.1mm, blade length: 6.0mm
Diameter: 1.2mm, blade length: 7mm
Diameter: 1.3mm, blade length: 8mm
Diameter: 1.4mm, blade length: 8mm
Diameter: 1.5mm, blade length: 8mm
Diameter: 1.6mm, blade length: 7mm
Diameter: 1.8mm, blade length: 8mm
Diameter: 2.0mm, blade length: 8mm
Diameter: 2.4mm, blade length: 8mm
Diameter: 2.5mm, blade length: 7mm
Diameter: 3.0mm, blade length: 8mm
Diameter: 3.175mm, blade length: 8mm
*Shank diameter: 3.175 mm full length: ± 38mm (Approx.)
*Optional types: 0.6mm-1.5mm, 0.8mm-3.175mm, 1.5mm-3.175mm (Approx.)
Package Contents:
10*End Mill
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

CNC End Mill Mold Carving Supplies Burrs 3.175mm shank Milling Durable
Details:
*100% brand new and high quality
*The use of ultra-fine grained cemented carbide materials has good milling and cutting performance to ensure high work efficiency
*Sufficient flexural strength and abrasion resistance
*Milling grooves, holes and plate edges, the surface is clean, neat and burr-free
*Processing scope: PCB, SMT, CNC, mold, carving, plastic, copper, stainless steel and other hardware processing
*Color: Blue (As Pictures Show)
*Material: Carbide
*Specification (Approx.):
Diameter: 0.8mm, blade length: 3.5mm
Diameter: 0.9mm, blade length: 4.5mm
Diameter: 1.0mm, blade length: 5.5mm
Diameter: 1.1mm, blade length: 6.0mm
Diameter: 1.2mm, blade length: 7mm
Diameter: 1.3mm, blade length: 8mm
Diameter: 1.4mm, blade length: 8mm
Diameter: 1.5mm, blade length: 8mm
Diameter: 1.6mm, blade length: 7mm
Diameter: 1.8mm, blade length: 8mm
Diameter: 2.0mm, blade length: 8mm
Diameter: 2.4mm, blade length: 8mm
Diameter: 2.5mm, blade length: 7mm
Diameter: 3.0mm, blade length: 8mm
Diameter: 3.175mm, blade length: 8mm
*Shank diameter: 3.175 mm full length: ± 38mm (Approx.)
*Optional types: 0.6mm-1.5mm, 0.8mm-3.175mm, 1.5mm-3.175mm (Approx.)
Package Contents:
10*End Mill
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

0.8mm-3mm Milling Cutter Bits Tools Pack CNC 10Pcs Nano Blue Coat Router Bits
Features:
*100% brand new and high quality
*Cutting Edge Diameter: 0.8-3.0mm (0.8 / 1.0 / 1.2 / 1.4 / 1.6 / 1.8 / 2.0 / 2.2 / 2.4 / 3.0mm)
*With sufficient flexural strength and wear resistance to ensure high work efficiency
*Using ultra-fine grained carbide materials with good milling and cutting performance
*Advantages: sharp cutting edges, milling, holes and edge of the board, clean surface, neat, burr-free
*Application: PCB, SMT, CNC, Mold, Plastic Fiber, Carbon Fiber, Hardwood, Printed Circuit Board And Other Precision Parts Processing
Specification:
*Material: Hard Alloy Steel
*Tool Holder Diameter: 3.175mm(Approx.)
*Flute Length: 12mm(Approx.)
*Total Length: 37mm(Approx.)
*Flute Diameter: 0.8-3.0mm
*Quantity: 10Pcs
Package Contents:
10 * CNC Milling Cutter Bits
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

2pcs /set WIRE WHEEL CUP BRUSH 3" 75mm For 4-1/2" (115mm) ANGLE GRINDER KIT
Details:
*100% Brand new and high quality
*Suitable for high speed rotation of high speed angle grinders.
*Suitable for deburring, weld cleaning, painting, descaling, surface treatment
*Standard crimp and kink styles available in carbon steel, stainless steel, brass or copper wire
*Maximum safe speed: 12,500 rpm
*Color: As Pictures Show
*Diameter:75mm(Approx.)
Package Contents:
2* cup brush
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

2Pcs 6mm Single Flute Spiral End Mills Carbide Router Bits Rotary Tool Equipment
Details:
*100% brand new and high quality
*Material: High-quality Micro Grain Tungsten Steel Solid Carbide
*Type: Single Flute Spiral Solid Carbide End mills
*Cutting Diameter: 6mm (Approx.)
*Flute Length: 22mm (Approx.)
*Shank Diameter: 6mm (Approx.)
*Overall Length: 50mm (Approx.)
*Best Suitable Material: Aluminum
*Fit for below materials:
(1) MDF, particle board, board with lagging, log, affixed to the skin panels;
(2) Acrylic, PVC, resin, plastic, chipboard, composite board, melamine board;
(3) Solid wood, native wood, plywood, lotus plate;
Package Contents:
2*End Mills
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

5/8-27 UNS HSS Right Hand Thread Tap And Die Kit 5/8 - 27 TPI (5/8x27) Replace
Item Details:
*100% Brand new and high quality
*High speed steel (HSS) provides good wear-resistance and can be used in general purpose applications for both ferrous and non-ferrous materials
*Provides a smooth, polished finish on the tool
Specifications:
*Model: 5/8"-27
*Thread diameter (D): 5/8" or 0.625in or 15.875mm
*Threads per inch (TPI): 27
*Pitch (P): 0.941 mm
*Thread type: uniform special thread (UNS)
*Cutting direction: Right Hand
*Outer diameter: 38 mm
*Carbide tool steel
*Material: High speed steel
Package Contents:
1*Right hand thread tap and die set 5/8'' - 27 TPI
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Router Bits Milling cutter Spiral Cutters Engraving 3.175x22mm Equipment
Details:
*100% brand new and high quality
*High precision grind by imported machine tools;
*Unique finish polish, sharp cutting edge;
*High durability, not easy to break;
*Combine single-edge excellent removing and spiral cutting, can greatly increase cutting speed while ensuring quality.
*Suitable Materials:
Acrylic, PVC, MDF, high-density board, lotus board,Solid wood, wood, plastic plate, double color sheet, etc.
*Application: Cutting, engraving, slotting, milling, and so on, such as hollow cut.
*Color: Silver (As Pictures Show)
*Material: Tungsten steel
*Diameter (Approx.): 0.125 inch / 0.16 inch / 0.24 inch / 0.32 inch (3.175mm / 4mm / 6mm / 8mm);
*Total length 50mm, blade length 22mm, shank diameter 3.175mm (Approx.)
Package Contents:
10*Single flute milling cutter
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Alloy Tool Steel Thread Die Right Hand 1 inch-24 TPI Equipment Useful Reliable
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Model / Size: 1''-24.
*Nominal Diameter (D): 1 inch or 1.0 inch or 25.4 mm.
*Threads Per Inch (TPI): 24.
*Spacing (P): 1.058 mm.(Approx.)
*Outer Diameter: 55mm.(Approx.)
*Thread Type: Unified Special Thread (UNS).
*Material: Alloy Tool Steel.
*Cutting Direction: Right Hand.
Package Contents:
1*Right Hand Thread Mold 1''-24 TPI
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Set Tap Equipment Metalworking CNC Thread High Speed Steel Tools Useful
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*New HSS 20mm x 1.5 metric taper and plug right-hand thread M20 x 1.5mm pitch
*Material: High Speed Steel
*Total Length: 86mm(Approx.)
*Quantity: 2
*Color: As pictures show
Package Contents:
2 * Taps
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*This is a set of single-edge end mill cutting tools for industrial milling applications
*It is different from drills in application, geometry and manufacturing. Single flute end mills are used for excellent chip removal in high milling
*These end mills are made of tungsten carbide and can withstand more heat while still maintaining good hardness
*This set of end mills is made of high-quality tungsten carbide, with good hardness, and the cutting edge is quite strong
*A cutting edge of 2 mm and a standard shank diameter of 3.175 mm will fit many milling machines or CNC cutting machines
*Single flute design end mills with grooves provide cutting surface and chip removal
*There are a total of 10 end mills in this kit, which will be a good substitute
*Usually these end mills are used to cut acrylic, PVC, MDF, density board, wood and many other soft materials
Specifications:
*Material: Tungsten carbide
*Blade diameter: 2mm (0.08")
*Number of blades: 1
*Shank diameter: 3.175 mm (1/8 inch)
*Blade length: 8mm (0.31")
*Total length: about 39 mm (1.53")
*Cutting: Acrylic, PVC, MDF, MDF, wood, etc.
*Quantity: 10
Package Contents:
10 *End mill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

CNC Drill End Mill Engraving Tungsten carbide 39 mm (1.53") PVC MDF High quality
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*This is a set of single-edge end mill cutting tools for industrial milling applications
*It is different from drills in application, geometry and manufacturing. Single flute end mills are used for excellent chip removal in high milling
*These end mills are made of tungsten carbide and can withstand more heat while still maintaining good hardness
*This set of end mills is made of high-quality tungsten carbide, with good hardness, and the cutting edge is quite strong
*A cutting edge of 2 mm and a standard shank diameter of 3.175 mm will fit many milling machines or CNC cutting machines
*Single flute design end mills with grooves provide cutting surface and chip removal
*There are a total of 10 end mills in this kit, which will be a good substitute
*Usually these end mills are used to cut acrylic, PVC, MDF, density board, wood and many other soft materials
Specifications:
*Material: Tungsten carbide
*Blade diameter: 2mm (0.08")
*Number of blades: 1
*Shank diameter: 3.175 mm (1/8 inch)
*Blade length: 8mm (0.31")
*Total length: about 39 mm (1.53")
*Cutting: Acrylic, PVC, MDF, MDF, wood, etc.
*Quantity: 10
Package Contents:
10 *End mill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Tap M22mm X 1.5 Metric Machines Tapping Metalworking Tool M22x1.5 Mm (S)M22
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*1pc Tap M22mm x 1.5 metric machine tap M22x1.5 mm high quality(S)M22
*Color: As pictures show
*Quantity: 1
Package Contents:
1*Tap
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Cutting End Mills Taper Ball Nose Router Bit Milling Cutter HRC55 2 flutes
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Suitable for: cutting, end milling, slotting: stainless steel, cast iron, copper, aluminum, carbon steel, die steel, etc.; hardwood, plywood, etc.;
* Use high quality imported tungsten steel hard alloy;
* Excellent chip removal effect, long lasting
* High surface finish, excellent work
Specifications:
* Model: TC-R1 * D6*30.5**75L2F;
* Manufacture: imported tungsten steel hard alloy;
* Flute: 2 flutes;
* Working material HRC: 0~55 degrees
* Radius: 1mm / 0.040";(Approx.)
* Coating: titanium aluminum nitride;
* Shank diameter: 6mm / 0.24";(Approx.)
* Cutting length: 30.5mm / 1.2";(Approx.)
* Total length: 75mm / 2.96";(Approx.)
* One side angle: B = 3.75°
Package Contents:
1*End Mill
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

High speed steel Thread tap die Metric Right Hand Metalworking Equipment New
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* M14 x 1.25 HSS metric right-hand thread tap and die set 14mm x 1.25mm pitch
* High speed steel (HSS) has good wear resistance and can be used for general purposes of ferrous and non-ferrous materials.
* Provides a smooth, polished surface on the tool.
Specification:
* Model / Size: M14x1.25
* Thread Diameter (D): 14mm.(Approx.)
* Spacing (P): 1.25mm.(Approx.)
* Thread Type: Metric.
* Tap Material: HSS
* Die Material: Alloy Tool Steel.
* Cutting Direction: Right Hand.
* Flute Type: Straight.
Package Contents:
1 *Metric Right-Hand Tap
1 *Die
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Thread tap die Tools Metalworking M14x1.25 Metric Industrial Equipment
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* M14 x 1.25 HSS metric right-hand thread tap and die set 14mm x 1.25mm pitch
* High speed steel (HSS) has good wear resistance and can be used for general purposes of ferrous and non-ferrous materials.
* Provides a smooth, polished surface on the tool.
Specification:
* Model / Size: M14x1.25
* Thread Diameter (D): 14mm.(Approx.)
* Spacing (P): 1.25mm.(Approx.)
* Thread Type: Metric.
* Tap Material: HSS
* Die Material: Alloy Tool Steel.
* Cutting Direction: Right Hand.
* Flute Type: Straight.
Package Contents:
1 *Metric Right-Hand Tap
1 *Die
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

1/2Pcs Milling CNC Arbor Silver Right Angle End Mills Accessories Delicate Solid
Features:
*100% brand new and high quality.
*Made of high quality material, durable and practical to use.
*Delicate and exquisite, highly match the equipment.
*Solid and durable, long service life.
*Easy to install and reliable to use.
Specifications:
*Material: High speed steel
*Color: Silver (As Pictures Show)
*Handle Form: Cylindrical
*Series: Right Angle Milling CNC Arbor
*Cutter Diameter: 16mm
*Tool Holder Diameter: 16mm
*Total Length: 200mm
Package Contents:
1/2 * Right Angle Milling CNC Arbor
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

1/2Pcs Milling CNC Arbor Silver Right Angle End Mills Accessories Delicate Solid
Features:
*100% brand new and high quality.
*Made of high quality material, durable and practical to use.
*Delicate and exquisite, highly match the equipment.
*Solid and durable, long service life.
*Easy to install and reliable to use.
Specifications:
*Material: High speed steel
*Color: Silver (As Pictures Show)
*Handle Form: Cylindrical
*Series: Right Angle Milling CNC Arbor
*Cutter Diameter: 16mm
*Tool Holder Diameter: 16mm
*Total Length: 200mm
Package Contents:
1/2 * Right Angle Milling CNC Arbor
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Steel End Mill Cutter Milling Parts Replacement Universal R0.5*D6*30.5*75L
1pcs R0.5 * D6 * 30.5 * 75L 2 Flute HRC55 Taper Ball Nose End Mill For CNC Tool
Features:
100% brand new and high quality
Made of high-quality materials, durable
High quality tungsten steel taper taper ball end mill with 2 blades.
Tapered ball end mill/cone milling cutter.
Long lasting.
Applicable processing: hardwood parts of iron and other steel parts.
Product parameters:
Material: Tungsten steel
Surface treatment: coating
Number of blades: 2 blades
Radius: about 0.5mm (0.020 inch)
Tool handle diameter: about 6mm (0.24")
Cutting length: about 30.5mm (1.2 inches)
Full length: about 75 mm (2.96 inches)
Single angle: about B = 4.68°
Processing material HRC:0~55°
Package Included:
1 *Milling cutter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

4 Flute End Mill Extension Tools Set CNC 5Pcs Milling Cutter HRC50 Useful
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Color: Blue Silver (As pictures show)
*Material: Carbide
*Coating: Nitrogen Coating
*Head Diameter: d = 2, 3, 4, 5, 6 mm(Approx.)
*Rod Diameter: D = 4, 4, 4, 6, 6mm(Approx.)
*Wing Length: L1=6,8,11,13,16mm(Approx.)
*Full Length: L=50, 50, 50, 50, 50mm(Approx.)
*Maximum Cutting Hardness: HRC50
Package Contents:
5pcs/Set Carbide End Mill
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

SDQCL1212H07 Lathe External Turning Tool Holder 10* DCMT070204 Insert Left Hand
Item Details:
100% brand new and high quality
Made of high quality material, durable and practical to use
Model: SDQCL1212H07
Direction: Left Hand
Shank D : 12mm(Approx.)
Shank L : 100mm(Approx.)
Screw: M2.5 x 6
Wrench : T8
Accept Insert :DCMT070204 UE6020 (10PCS )
Color: As pictures show
Package Contents:
10*DCMT070204 UE6020
1*SDQCL1212H07
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

6mm shank Drill set CNC 5 pcs Parts Accessories Tungsten carbide Durable
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*High strength and hardness
*Easy to use and safe
*Reduce labor intensity
*High degree of finish, can calculate the high precision of various shapes of cavities.
*10 times more durable than high-speed steel tools, 200 times more durable than small grinding wheels
*Use with handheld electric or pneumatic tool drivers (also for machine tools)
*The speed of electric or pneumatic tools is usually 6000-50000 revolutions per minute
*Processing various metals (including various quenched steels) and non-metals (such as marble, jade), the processing hardness reaches *For most jobs, it can be replaced with a smaller grinding wheel, and there is no dust pollution
*Used to clean the trimming, lines and welds of castings, forgings and weldments; complete various metal molds; impeller after finishing; various mechanical parts chamfering, round groove processing; mechanical parts inner hole surface finishing; The process of various metal and non-metal sculptures.
Specifications:
*Material: Tungsten carbide
*Blade diameter: about 8mm
*handle diameter: about 6 mm
*Handle length: about 40 mm
*Total length: 50-60mm
Package Contents:
5 *Tungsten carbide rotary burr bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

End Mill Tool Kit Set Parts Engine 10pcs Spiral Bit Practical Universal
Features:
Excellent edge-grinding technology.
Long service life, not easy to break, precise.
Sharp cutting edge smoke-free clean, good chip, high durability, cutting out text and other smooth,no burr.
High quality and brand new.
Specification:
Material: Carbide
Color: Silver (As Picture Show)
Blade Diameter: 3.175 mm
Shank Diameter: 3.175 mm
Blade Length: 25 mm
Tool Uses: Mainly applied to cut acrylic, organic board MDF wood and other materials
Carving Way: Cutting
Dimension: 3.175*40mm/0.13*1.57"(L*Dia)
Package Contents:
10 * Single Flute Spiral End Mill Cutter Bit
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.