Fémmegmunkáló kellékek

Radius 1-4MM Ball Nose End Mill Sharp Cutting 2 Flutes Chatter Resistant
Features:
Chatter resistant design for superior surface finishes and long tool life.
Optimized for handling the temperatures and demands of challenging materials such as high temp alloys.
Sharp cutting reasonable matched with high strength of cutter.
Arc relief angle makes tool better wear-resistance.
HRC50 For general steel alloy steel mold steel.
High quality and brand new.
Specification:
Model Number: NTG-R1.0-4.0 HRC50
Flute: 2 Flutes
Cutting Radius: R= 1.0, 2.0, 3.0, 4.0 mm
Cutting Diameter: d=2, 4, 6, 8 MM
Shank Diameter: D=4, 4, 6, 8 MM
Overall Length: L=50,50,50,50,60 MM
Material: Solide Carbide
Coating: TiAlN
Package Contents:
4 * Ball Nose End Mill
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Tool Holder Metal processing Processing W/ 4pcs WNMG0804 Inserts Accessory New
Features:
100% brand new and high quality
Made of high-quality materials, durable
CNC metal lathe tool holder set with carbide blade
The blade has high strength, high toughness, stability and durability.
Used for high hardness materials and cast iron.
Metal surface treatment, good wear resistance.
Practical and various processing environments, even in very dirty environments
For example, cast iron also has good functions.
Mainly used for steel processing.
Product parameters:
WWLNR1616H08 lathe tool holder
Blade material: steel
Model: WWLNR1616H08(WWLNR1616K08)
Full length: 125mm / 5 inches
Suitable for: semi-finishing, finishing
Carbide blade
Blade: WNMG0804 (4 pieces)
Material: Carbide
Width: 17 mm/0.67 inch
Processing process: finishing and semi-finishing
Blade color: gold
The package includes:
1 *MWLNR2020K08 bracket
1 * Wrench
4 *WNMG0804 carbide blade
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

5Pcs Steel Poly Strip Disc Wheel Paint Rust Removal Clean For Angle Grinder New
Features:
*100% brand new and high quality
*Wear resistant, low grinding noise.
*Removal of paint or rust without damaging the original surface.
*Used for surface preparation, conditioning and finishing.
*Ideal for removing, lacquer and paint coating on wood, stone, metal and fiberglass surfaces.
*Perfect fro most100mm angle grinders.
*Convenient to use.
Specifications:
*Material: Stainless steel Aluminum
*Color: Black(As Pictures Show)
*Size: Approx. 100*16mm/3.94*0.63 inch(Approx)
*Quantity: 5pcs
Package Contents:
5PCS Grinder Wheels
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
100% brand new and high quality
Made of high-quality materials, durable
CNC metal lathe tool holder set with carbide blade
The blade has high strength, high toughness, stability and durability.
Used for high hardness materials and cast iron.
Metal surface treatment, good wear resistance.
Practical and various processing environments, even in very dirty environments
For example, cast iron also has good functions.
Mainly used for steel processing.
Product parameters:
WWLNR1616H08 lathe tool holder
Blade material: steel
Model: WWLNR1616H08(WWLNR1616K08)
Full length: 125mm / 5 inches
Suitable for: semi-finishing, finishing
Carbide blade
Blade: WNMG0804 (4 pieces)
Material: Carbide
Width: 17 mm/0.67 inch
Processing process: finishing and semi-finishing
Blade color: gold
The package includes:
1 *MWLNR2020K08 bracket
1 * Wrench
4 *WNMG0804 carbide blade
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

End Mill Bits Metalworking Supplies 4-Flute Straight Shank End Milling
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Application: End Mill Bits are used for side milling, end milling, finish machining, etc.
Apply to wood, steel, stainless steel, alloy steel, carbon steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
Specifications:
Product Name: End Mill Bits
Material: HSS
Flute: 4 Flute End Mill Bits
Cutting Diameter: 2mm/0.08in, 3mm/0.12in, 4mm/0.16in, 5mm/0.2in, 6mm/0.24in, 7mm/0.27in, 8mm/0.31in, 9mm/0.35in, 10mm/0.39in, 12mm/0.47in(Approx.)
Warm Tips:
Stop immediately in the processing of anomalies when using the end mill bits and find out the reason before processing.
Pay attention to the condition of wear and tear of the cutting edge and timely repair the end mill bits.
Cleaning the end mill bits and use oil after using, keep end mill bits properly.
Package Contents:
10 x End Mill Bits
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

5pcs 4 Poly Strip Disc Grinder Wheel Paint Rust Removal Clean Polishing Tool
Features:
*100% brand new and high quality
*Wear resistant, low grinding noise.
*Removal of paint or rust without damaging the original surface.
*Used for surface preparation, conditioning and finishing.
*Ideal for removing, lacquer and paint coating on wood, stone, metal and fiberglass surfaces.
*Perfect fro most100mm angle grinders.
*Convenient to use.
Specifications:
*Material: Stainless steel Aluminum
*Color: Black(As Pictures Show)
*Size: Approx. 100*16mm/3.94*0.63 inch(Approx)
*Quantity: 5pcs
Package Contents:
5PCS Grinder Wheels
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
* 100% brand new high quality
* Made of high quality material, durable and practical to use
* Wear-resistant, low grinding noise
* Removal of paint or rust without damaging the original surface
* Used for surface preparation, conditioning and finishing
* Ideal for removing, lacquer and paint coating on wood, stone, metal and fiberglass surfaces
* For use with most makes of 100mm angle grinders
* Easy to use
Specifications:
* Material: Stainless steel, Aluminum
* Color: Black (As Pictures Show)
* Size: 100*16mm/3.94*0.63 inch (Approx.)
* Quantity: 5pcs
Package Contents:
5 *Grinder wheels
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Features:
100% brand new and high quality
Made of high-quality materials, durable
For driving electric or pneumatic tools (also for machine tools)
The speed of electric or pneumatic tools is usually 6000-50000 revolutions per minute
Suitable for cast iron deburring and polishing, cutting, engraving, cast steel, carbon steel, alloy steel, stainless steel and other materials
High strength and hardness, easy to use
Product parameters:
Blade diameter: 3 mm (10 pieces) and 6 mm (10 pieces)
Tool handle diameter: 3mm
Processing hardness: reach HRC70
Package list:
10 *3*3mm tungsten carbide rotary files
10 *3*6mm tungsten carbide turning burrs
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Nitrogen Coated Ball Nose End Mill Tool Sharp Cutting 2 Flutes Universal
Features:
Chatter resistant design for superior surface finishes and long tool life.
Optimized for handling the temperatures and demands of challenging materials such as high temp alloys.
Sharp cutting reasonable matched with high strength of cutter.
Arc relief angle makes tool better wear-resistance.
HRC50 For general steel alloy steel mold steel.
High quality and brand new.
Specification:
Model Number: NTG-R1.0-4.0 HRC50
Flute: 2 Flutes
Cutting Radius: R= 1.0, 2.0, 3.0, 4.0 mm
Cutting Diameter: d=2, 4, 6, 8 MM
Shank Diameter: D=4, 4, 6, 8 MM
Overall Length: L=50,50,50,50,60 MM
Material: Solide Carbide
Coating: TiAlN
Package Contents:
4 * Ball Nose End Mill
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Nibble Metal Cutting Double Head Sheet Nibbler Hole Saw Cutter Drill Tool New
Features:*100% brand new and high quality.
*Made of high-quality materials, durable and practical
*Powered by the drill bit-no additional power supply required.
*Double-head cutter-double-sided cutter with safety handle.
*Lightweight and compact-very suitable for the corner of the toolbox.
*360 degree rotation-adjust to any cutting angle and any shape.
*Heavy load-long service life and low maintenance cost.
*Precision cutting-no burrs or deformation will be left on the cutting edge.
*For main metal plate cutting: iron plate max 1.8mm / stainless steel plate max 1.2mm
*For cutting of other materials: copper or aluminum plate maximum 2.0mm / plastic or plywood maximum 2.0mm
Specifications:*Cutting thickness-cutting the material whose thickness does not exceed 2mm.
*Cutting shape-Cut corrugated, round and complex shapes into 12mm (1/2inch) radius.
*Size: about 18cm * 7.5cm / 7.09in * 2.95in.
*Color: orange
Package Contents:
1 x Metal Sheet Nibbler Cutter
1 x Plastic Handle
1 x Wrench
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Deburring Tool Burr 0-12mm Metalworking Supplies New Useful Industrial
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* DB1000 Sheet metal deburring tool-for straight edge chamfering burr
* Remove burrs on both sides of sheet metal at the same time.
* DB handle with safety guard to protect your hands.
* Unique circular cutting cutter can rotate and reverse, long service life. For corners, only one cutter can be used.
* Wear two round-hole cutters to make straight edge chamfering faster.
Specification:
* Material: Alloy Steel
* Range: 0-12mm
* Color: As pictures show
* Quantity: 1
Package Contents:
1*DB1000 Sheet Metal Deburring Tool
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

1mm-6mm End mill Set Accessory Carbide Ball nose Diameter HRC45 Useful
Detail:
*6pcs 2-flutes Carbide Ball Nose End Mills Set
*Superior surface finishes and high durability.
*Sharp cutting, arc relief angle design, wear-resistant.
*HRC45 for general steel, alloy steel, mold steel, soft steel.
*Item Condition:100% Brand New
*Material:Carbide with TiAlN coating
*Color: As Pictures Show
*Flute quantity:2
*Cutting Radius: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0mm
*Cutting Diameter: 1, 2, 3, 4, 5, 6mm
*Shank Diameter : 4, 4, 4, 4, 6, 6mm
*Blade length: 2.5, 5.0, 6.0, 8.0, 12, 12mm
*Total length: 50mm
*Hardness: 45HRC
Package Contents:
1*End Mill Set(6pcs)
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Turning CNC Tool Center Triple Bearing CNC Lathe Tool Accessory Useful
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
MT2 0.001" CNC precision long spindle lathe with centering tool
Perfectly designed for high speed and CNC lathes to achieve high precision
Triple ball bearing construction, extended long spindle with CNC tip to improve the grinding wheel distance
Made of high quality steel, robust and highly abrasion resistant
The shaft is made of alloy steel through heat treatment, high rigidity and durability
Specifications:
Product Name: MT2 Taper Live Center Triple Bearing
Ape x-Axis: T10 Steel,
Quenching Hardness: 55-60HRC
Body: 40CR Steel,
Quenching Hardness: 45-50HRC
Maximum Speed: 5000
According to The Hardness of The Treatment: HRC60o ± 2o
Color: Silver(As pictures show)
Accuracy: 0.001"
Optional Types: Type1, Type2, Type3, Type4, Type5, Type6, Type7
Package Contents:
1 x Turning Center Live Centering Tool
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Turning CNC Tool Center Triple Bearing CNC Lathe Tool Accessory Useful
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
MT2 0.001" CNC precision long spindle lathe with centering tool
Perfectly designed for high speed and CNC lathes to achieve high precision
Triple ball bearing construction, extended long spindle with CNC tip to improve the grinding wheel distance
Made of high quality steel, robust and highly abrasion resistant
The shaft is made of alloy steel through heat treatment, high rigidity and durability
Specifications:
Product Name: MT2 Taper Live Center Triple Bearing
Ape x-Axis: T10 Steel,
Quenching Hardness: 55-60HRC
Body: 40CR Steel,
Quenching Hardness: 45-50HRC
Maximum Speed: 5000
According to The Hardness of The Treatment: HRC60o ± 2o
Color: Silver(As pictures show)
Accuracy: 0.001"
Optional Types: Type1, Type2, Type3, Type4, Type5, Type6, Type7
Package Contents:
1 x Turning Center Live Centering Tool
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Turning CNC Tool Center Triple Bearing CNC Lathe Tool Accessory Useful
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
MT2 0.001" CNC precision long spindle lathe with centering tool
Perfectly designed for high speed and CNC lathes to achieve high precision
Triple ball bearing construction, extended long spindle with CNC tip to improve the grinding wheel distance
Made of high quality steel, robust and highly abrasion resistant
The shaft is made of alloy steel through heat treatment, high rigidity and durability
Specifications:
Product Name: MT2 Taper Live Center Triple Bearing
Ape x-Axis: T10 Steel,
Quenching Hardness: 55-60HRC
Body: 40CR Steel,
Quenching Hardness: 45-50HRC
Maximum Speed: 5000
According to The Hardness of The Treatment: HRC60o ± 2o
Color: Silver(As pictures show)
Accuracy: 0.001"
Optional Types: Type1, Type2, Type3, Type4, Type5, Type6, Type7
Package Contents:
1 x Turning Center Live Centering Tool
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Turning CNC Tool Center Triple Bearing CNC Lathe Tool Accessory Useful
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
MT2 0.001" CNC precision long spindle lathe with centering tool
Perfectly designed for high speed and CNC lathes to achieve high precision
Triple ball bearing construction, extended long spindle with CNC tip to improve the grinding wheel distance
Made of high quality steel, robust and highly abrasion resistant
The shaft is made of alloy steel through heat treatment, high rigidity and durability
Specifications:
Product Name: MT2 Taper Live Center Triple Bearing
Ape x-Axis: T10 Steel,
Quenching Hardness: 55-60HRC
Body: 40CR Steel,
Quenching Hardness: 45-50HRC
Maximum Speed: 5000
According to The Hardness of The Treatment: HRC60o ± 2o
Color: Silver(As pictures show)
Accuracy: 0.001"
Optional Types: Type1, Type2, Type3, Type4, Type5, Type6, Type7
Package Contents:
1 x Turning Center Live Centering Tool
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Turning CNC Tool Center Triple Bearing CNC Lathe Tool Accessory Useful
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
MT2 0.001" CNC precision long spindle lathe with centering tool
Perfectly designed for high speed and CNC lathes to achieve high precision
Triple ball bearing construction, extended long spindle with CNC tip to improve the grinding wheel distance
Made of high quality steel, robust and highly abrasion resistant
The shaft is made of alloy steel through heat treatment, high rigidity and durability
Specifications:
Product Name: MT2 Taper Live Center Triple Bearing
Ape x-Axis: T10 Steel,
Quenching Hardness: 55-60HRC
Body: 40CR Steel,
Quenching Hardness: 45-50HRC
Maximum Speed: 5000
According to The Hardness of The Treatment: HRC60o ± 2o
Color: Silver(As pictures show)
Accuracy: 0.001"
Optional Types: Type1, Type2, Type3, Type4, Type5, Type6, Type7
Package Contents:
1 x Turning Center Live Centering Tool
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Turning CNC Tool Center Triple Bearing CNC Lathe Tool Accessory Useful
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
MT2 0.001" CNC precision long spindle lathe with centering tool
Perfectly designed for high speed and CNC lathes to achieve high precision
Triple ball bearing construction, extended long spindle with CNC tip to improve the grinding wheel distance
Made of high quality steel, robust and highly abrasion resistant
The shaft is made of alloy steel through heat treatment, high rigidity and durability
Specifications:
Product Name: MT2 Taper Live Center Triple Bearing
Ape x-Axis: T10 Steel,
Quenching Hardness: 55-60HRC
Body: 40CR Steel,
Quenching Hardness: 45-50HRC
Maximum Speed: 5000
According to The Hardness of The Treatment: HRC60o ± 2o
Color: Silver(As pictures show)
Accuracy: 0.001"
Optional Types: Type1, Type2, Type3, Type4, Type5, Type6, Type7
Package Contents:
1 x Turning Center Live Centering Tool
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Turning CNC Tool Center Triple Bearing CNC Lathe Tool Accessory Useful
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
MT2 0.001" CNC precision long spindle lathe with centering tool
Perfectly designed for high speed and CNC lathes to achieve high precision
Triple ball bearing construction, extended long spindle with CNC tip to improve the grinding wheel distance
Made of high quality steel, robust and highly abrasion resistant
The shaft is made of alloy steel through heat treatment, high rigidity and durability
Specifications:
Product Name: MT2 Taper Live Center Triple Bearing
Ape x-Axis: T10 Steel,
Quenching Hardness: 55-60HRC
Body: 40CR Steel,
Quenching Hardness: 45-50HRC
Maximum Speed: 5000
According to The Hardness of The Treatment: HRC60o ± 2o
Color: Silver(As pictures show)
Accuracy: 0.001"
Optional Types: Type1, Type2, Type3, Type4, Type5, Type6, Type7
Package Contents:
1 x Turning Center Live Centering Tool
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Carbide Rotary Tools Grinding head Chamfering 6inch Durable Accessories
Details:
*100% brand new and high quality
*High efficiency, high-quality finish, long service life, good economic returns.
*Easy to use, safe and reliable, can reduce labor intensity.
*Mechanical parts chamfering, rounding and groove processing.
*Dual Chamber is crossover lines, not easy to block the lines, more suitable for the object of relatively low density material.
*Color: Silver (As Pictures Show)
*Material: Carbide
*Shank Diameter (Approx.): 1/4" (6MM)
*Shank Length (Approx.):150MM--160MM ( 6 Inch )
Package Contents:
4*Carbide Rotary Tools
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

6mm x22mm Drill Carbide Single Flute Spiral Cutters Tungsten carbide New Hot
Features:
100% brand new and high quality
Made of high-quality materials, durable
This is a set of single-edge end mill cutting tools for industrial milling applications.
It is different from drill bits in application, geometry and manufacturing.
Single flute end mills are used for excellent chip removal in high-speed milling.
These end mills are made of tungsten carbide and can withstand more heat while still maintaining good hardness.
This set of end mills is made of high-quality tungsten carbide with good hardness and very sharp cutting edges.
A 6mm cutting edge and a 6mm standard shank diameter will fit many milling machines or CNC cutting machines.
The single-edge design of the end mill has a sharp cutting edge, which provides a smooth cutting surface and chip removal.
Usually, these end mills are used to cut acrylic, PVC, MDF, density board and many other soft materials.
Product parameters:
Material: Tungsten carbide
Blade diameter: 6mm / 0.23"
Number of blades: 1
Shank diameter: 6mm / 0.23"
Blade length: 22mm / 0.86"
Total length: about 45 mm / 1.77 inches
Cutting: Acrylic, PVC, MDF, MDF, etc.
Quantity: 5
Package list:
5 *End mill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

5 X Tungsten Carbide End Mill Drill Carbide CNC Router Bits Durable 6mm X22mm
Features:
100% brand new and high quality
Made of high-quality materials, durable
This is a set of single-edge end mill cutting tools for industrial milling applications.
It is different from drill bits in application, geometry and manufacturing.
Single flute end mills are used for excellent chip removal in high-speed milling.
These end mills are made of tungsten carbide and can withstand more heat while still maintaining good hardness.
This set of end mills is made of high-quality tungsten carbide with good hardness and very sharp cutting edges.
A 6mm cutting edge and a 6mm standard shank diameter will fit many milling machines or CNC cutting machines.
The single-edge design of the end mill has a sharp cutting edge, which provides a smooth cutting surface and chip removal.
Usually, these end mills are used to cut acrylic, PVC, MDF, density board and many other soft materials.
Product parameters:
Material: Tungsten carbide
Blade diameter: 6mm / 0.23"
Number of blades: 1
Shank diameter: 6mm / 0.23"
Blade length: 22mm / 0.86"
Total length: about 45 mm / 1.77 inches
Cutting: Acrylic, PVC, MDF, MDF, etc.
Quantity: 5
Package list:
5 *End mill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

6mm x22mm Drill CNC Router Bits Single Flute Spiral Cutters Tungsten carbide
Features:
100% brand new and high quality
Made of high-quality materials, durable
This is a set of single-edge end mill cutting tools for industrial milling applications.
It is different from drill bits in application, geometry and manufacturing.
Single flute end mills are used for excellent chip removal in high-speed milling.
These end mills are made of tungsten carbide and can withstand more heat while still maintaining good hardness.
This set of end mills is made of high-quality tungsten carbide with good hardness and very sharp cutting edges.
A 6mm cutting edge and a 6mm standard shank diameter will fit many milling machines or CNC cutting machines.
The single-edge design of the end mill has a sharp cutting edge, which provides a smooth cutting surface and chip removal.
Usually, these end mills are used to cut acrylic, PVC, MDF, density board and many other soft materials.
Product parameters:
Material: Tungsten carbide
Blade diameter: 6mm / 0.23"
Number of blades: 1
Shank diameter: 6mm / 0.23"
Blade length: 22mm / 0.86"
Total length: about 45 mm / 1.77 inches
Cutting: Acrylic, PVC, MDF, MDF, etc.
Quantity: 5
Package list:
5 *End mill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Replacement End Mills Set 0.25-1.0mm Drill Bit Carbide Ball Industrial
Detail:
*4pcs 0.25-1.0mm Carbide Tapered Ball Nose End Mill Set
*Suitable for cutting, milling and slotting on stainless-steel, cast iron, copper, aluminum, carbon steel, die steel, hard wood, plywood, etc.material.
*Good chip removal effect.
*Item Condition:100% Brand New
*Material:Carbide
*Color: As Pictures Show
*Overall length: 38mm(Approx.)
*Shank Diameter: 3.175mm(1/8inch)
*Flutes length: 15mm
*Hardness: HRC55
*Cutting Radius: 0.25, 0.5, 0.75, 1.0 mm
*Per side angle:5.09°,4.15°,3.20°,2.24°
Package Contents:
1*End Mills Set(4pcs)
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Drill CNC Router Bits Single Flute Spiral Cutters Durable High quality
Features:
100% brand new and high quality
Made of high-quality materials, durable
This is a set of single-edge end mill cutting tools for industrial milling applications.
It is different from drill bits in application, geometry and manufacturing.
Single flute end mills are used for excellent chip removal in high-speed milling.
These end mills are made of tungsten carbide and can withstand more heat while still maintaining good hardness.
This set of end mills is made of high-quality tungsten carbide with good hardness and very sharp cutting edges.
A 6mm cutting edge and a 6mm standard shank diameter will fit many milling machines or CNC cutting machines.
The single-edge design of the end mill has a sharp cutting edge, which provides a smooth cutting surface and chip removal.
Usually, these end mills are used to cut acrylic, PVC, MDF, density board and many other soft materials.
Product parameters:
Material: Tungsten carbide
Blade diameter: 6mm / 0.23"
Number of blades: 1
Shank diameter: 6mm / 0.23"
Blade length: 22mm / 0.86"
Total length: about 45 mm / 1.77 inches
Cutting: Acrylic, PVC, MDF, MDF, etc.
Quantity: 5
Package list:
5 *End mill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Tungsten Carbide Drill Bit Grinder Grinding 150-160mm Aluminum Durable
Details:
*100% brand new and high quality
*Made of high-quality materials, durable
*4 sets of 150-160mm tungsten steel rotary head carbide rotary file engraving and milling cutter
*Carbide rotary file, used for mold making, mechanical part chamfering, rounding and groove processing, cleaning
*Casting, forging, weld flash, burr and weld, pipe, impeller runner finishing, metal and non-metal materials (bones,
Jade) Arts and Crafts Carving
Specifications:
*Double slot: wood, plastic, aluminum
*Shank diameter: 6mm
*Length: 150-160mm
*Material: Carbide
Package Contents:
4 * Tungsten Carbide Drill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

SCLCR1616H09 Lathe Turning Tool Holder 10* Carbide Inserts Wrench Set Useful
Features:Suitable for normal processing stainless steel and common, such as 45 steel, A3 steel, stainless steel and other soft materials 201, 304 etc..
High strength, high toughness, stable and sturdy.
Cutting fast, accuracy and stability.
Metal surface finishing, thick edge, well wear resistance, not easy to chipping.
Come with storage box for easy to carry.
Specifications:Inserts Material: 42cr
Inserts Model: CCMT09T304
Lathe Model: SCLCR1616H09
Wrench Model: T15
Inserts Shape: Rhombus
Inserts Color: Silver
Inserts Size: 8 * 4mm / 0.31 * 0.16in
Lathe Size: 90 * 16 * 13mm / 3.54 * 0.63 * 0.51in
Package List:10 * CCMT09T304 Inserts
1 * SCLCR1616H09 Lathe
1 * T15 Wrench
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

3.54*0.63*0.51" Lathe Turning tool Holder W/ T15 Wrench Carbide SCLCR1616H09
Features:Suitable for normal processing stainless steel and common, such as 45 steel, A3 steel, stainless steel and other soft materials 201, 304 etc..
High strength, high toughness, stable and sturdy.
Cutting fast, accuracy and stability.
Metal surface finishing, thick edge, well wear resistance, not easy to chipping.
Come with storage box for easy to carry.
Specifications:Inserts Material: 42cr
Inserts Model: CCMT09T304
Lathe Model: SCLCR1616H09
Wrench Model: T15
Inserts Shape: Rhombus
Inserts Color: Silver
Inserts Size: 8 * 4mm / 0.31 * 0.16in
Lathe Size: 90 * 16 * 13mm / 3.54 * 0.63 * 0.51in
Package List:10 * CCMT09T304 Inserts
1 * SCLCR1616H09 Lathe
1 * T15 Wrench
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

5x Radius 0.25mm 1/8 Shank Tapered End Mill CNC Carbide Ball Nose Milling Bits
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Suitable Materials: For cutting soft materials, cast iron, cast steel, alloy steel(below HRC55), General speed or high speed milling.
Specifications:
Material: High Quality Tungsten Carbide
Model:R0.25-D1/8-TiAlN
Flutes: 2 Flutes;
Worked Material: HRC: 0~55
Coating: TiAIN;
Radius: 0.25mm;(Approx.)
Shank Diameter: 1/8"(Approx.)
Cutting Length: 15mm(Approx.)
Overall Length: 1-1/2" (Approx.)
R0.25-D1/8-TiAlN
R0.5-D1/8-TiAlN
R0.75-D1/8-TiAlN
R1.0-D1/8-TiAlN
R0.25-D1/8-HSi
R0.5-D1/8-HSi
R0.75-D1/8-HSi
R1.0-D1/8-HSi
Package Contents:
5*End Mill With Plastic Box
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Tungsten 7pcs End Mill DIY Milling Cutter Kit 1-8MM 4 Flutes Practical
Item Details:
*100% Brand new and high quality
*7Pcs 4-slot carbide end mill set straight shank CNC tool 1MM-8MM
*Durable and practical
*Four-slot design reduces chip load and quicker removal
*Applicable materials: wood, plastic, aluminum, etc
*Applicable to DIY, home and general construction / engineering use
Specification:
*Flute: 4
*Model: M1-8 HRC50
*Material: Carbide
*Coating: Nitrogen coating
*KVS characteristics: HRC50 is used for ordinary steel alloy steel die steel
*Maximum cutting hardness: HRC50
*Head diameter (A): 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 8mm
*Shank diameter (B): 4mm, 4mm, 4mm, 4mm, 6mm, 6mm, 8mm
*Blade length (C): 3mm, 6mm, 8mm, 11mm, 13mm, 16mm, 20mm
*Total length (D): 50mm, 50mm, 50mm, 50mm, 50mm, 50mm, 60mm
Package Contents:
7*End Mill
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Tungsten carbide Drill 5X/set 6mm x22mm Carbide CNC Router Bits Durable
Features:
100% brand new and high quality
Made of high-quality materials, durable
This is a set of single-edge end mill cutting tools for industrial milling applications.
It is different from drill bits in application, geometry and manufacturing.
Single flute end mills are used for excellent chip removal in high-speed milling.
These end mills are made of tungsten carbide and can withstand more heat while still maintaining good hardness.
This set of end mills is made of high-quality tungsten carbide with good hardness and very sharp cutting edges.
A 6mm cutting edge and a 6mm standard shank diameter will fit many milling machines or CNC cutting machines.
The single-edge design of the end mill has a sharp cutting edge, which provides a smooth cutting surface and chip removal.
Usually, these end mills are used to cut acrylic, PVC, MDF, density board and many other soft materials.
Product parameters:
Material: Tungsten carbide
Blade diameter: 6mm / 0.23"
Number of blades: 1
Shank diameter: 6mm / 0.23"
Blade length: 22mm / 0.86"
Total length: about 45 mm / 1.77 inches
Cutting: Acrylic, PVC, MDF, MDF, etc.
Quantity: 5
Package list:
5 *End mill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

5pcs Radius 1.0mm Tapered Ball Nose End Mill 1/8 Shank HRC55 CNC Router Bits
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Suitable Materials :For cutting soft materials, cast iron, cast steel, alloy steel(below HRC55), General speed or high speed milling.
Specifications:
Material: High Quality Tungsten Carbide
Model:R1.0-D1/8-TiAlN
Flutes: 2 Flutes;
Worked Material: HRC: 0~55
Coating: TiAIN;
Radius:1.0mm;(Approx.)
Shank Diameter: 1/8"(Approx.)
Cutting Length: 15mm(Approx.)
Overall Length: 1-1/2"(Approx.)
Package Contents:
5 * End Mill With Plastic Box
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Radius 1.0mm End Mill Tapered Ball Nose Part 1/8 Shank HRC55 CNC Router Bits New
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Suitable Materials :For cutting soft materials, cast iron, cast steel, alloy steel(below HRC55), General speed or high speed milling.
Specifications:
Material: High Quality Tungsten Carbide
Model:R1.0-D1/8-TiAlN
Flutes: 2 Flutes;
Worked Material: HRC: 0~55
Coating: TiAIN;
Radius:1.0mm;(Approx.)
Shank Diameter: 1/8"(Approx.)
Cutting Length: 15mm(Approx.)
Overall Length: 1-1/2"(Approx.)
Package Contents:
5 * End Mill With Plastic Box
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Plastic End mill Replacement 4 Flutes Tungsten CNC Cutter tool Durable
Features:
*7pcs 1-8mm 50° 4 Flutes Tungsten Carbide End Mill Set CNC Milling Cutter Tool
*100% brand new and high quality
*Durable and practical
*Four flute design provides small chip loads and quicker removal
*Ideal for wood, plastic, aluminum plate, etc
*Suitable for DIY, Home and General Building/Engineering Using
Specifications:
*Flute: 4
*Model Number: M1-8 HRC50
*Material: Solid carbide
*Coating: Nitrogen coated
*KVS Features: HRC50 For general steel alloy steel mold steel
*Highest cutting hardness: HRC50
*Quantity: 7pcs/set (1~8mm)
*Head diameter: 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 8mm (Approx)
*Shank diameter: 4mm, 4mm, 4mm, 4mm, 6mm, 8mm, 8mm (Approx)
*Cutting leaf length: 3mm, 6mm, 8mm, 11mm, 13mm, 16mm, 20mm (Approx)
*Total length: 50mm, 50mm, 50mm, 50mm, 50mm, 50mm, 60mm (Approx)
Package Contents:
1 Set of End Mill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

7pcs End mill Tungsten CNC Removal Aluminum plate Replacement 4 Flutes
Features:
*7pcs 1-8mm 50° 4 Flutes Tungsten Carbide End Mill Set CNC Milling Cutter Tool
*100% brand new and high quality
*Durable and practical
*Four flute design provides small chip loads and quicker removal
*Ideal for wood, plastic, aluminum plate, etc
*Suitable for DIY, Home and General Building/Engineering Using
Specifications:
*Flute: 4
*Model Number: M1-8 HRC50
*Material: Solid carbide
*Coating: Nitrogen coated
*KVS Features: HRC50 For general steel alloy steel mold steel
*Highest cutting hardness: HRC50
*Quantity: 7pcs/set (1~8mm)
*Head diameter: 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 8mm (Approx)
*Shank diameter: 4mm, 4mm, 4mm, 4mm, 6mm, 8mm, 8mm (Approx)
*Cutting leaf length: 3mm, 6mm, 8mm, 11mm, 13mm, 16mm, 20mm (Approx)
*Total length: 50mm, 50mm, 50mm, 50mm, 50mm, 50mm, 60mm (Approx)
Package Contents:
1 Set of End Mill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
Profiling bar for semi-finishing and finishing operations;
Bar hardness approximately 45HRC;
Good toughness and hardness, long service life.
It can reduce the tool grinding cost and improve the cutting efficiency;
Good low temperature impact toughness, improved the surface gloss of the cutting pieces.
Specifications:
Suitable for: machining steel
Coatings: Carbide PVD
Material: Metal
Color: Golden
Model:CCMT060204-HM
S10K-SCLCR06 10x125mm Min.Bore 12mm
S08K-SCLCR06 8x125mm Min.Bore 10mm
S07K-SCLCR06 7x125mm Min.Bore 9mm
S06K-SCLCR06 6x125mm Min.Bore 8mm
Package Included:
10 x CCMT060204-HM Insert
1 x S06K-SCLCR06 Boring Bar
1 x S07K-SCLCR06 Boring Bar
1 x S08K-SCLCR06 Boring Bar
1 x S10K-SCLCR06 Boring Bar
4 x T8 wrenchs
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Suitable Materials: For cutting soft materials, cast iron, cast steel, alloy steel(below HRC55), General speed or high speed milling.
Specifications:
Material: High Quality Tungsten Carbide
Model:R0.25-D1/8-TiAlN
Flutes: 2 Flutes;
Worked Material: HRC: 0~55
Coating: TiAIN;
Radius: 0.25mm;(Approx.)
Shank Diameter: 1/8"(Approx.)
Cutting Length: 15mm(Approx.)
Overall Length: 1-1/2" (Approx.)
R0.25-D1/8-TiAlN
R0.5-D1/8-TiAlN
R0.75-D1/8-TiAlN
R1.0-D1/8-TiAlN
R0.25-D1/8-HSi
R0.5-D1/8-HSi
R0.75-D1/8-HSi
R1.0-D1/8-HSi
Package Contents:
5*End Mill With Plastic Box
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Angle Grinder Strip disc Abrasive Polishing Poly Clean Removal 46 grit Durable
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Abrasion resistance, even grinding effect.
* Low dust and low noise.
* Remove paint or rust very quickly without damaging the original surface.
* Anti-blocking, quick peeling, can be used for all coatings and surfaces.
* Applicable to most brands of 100mm angle grinders.
* For surface treatment, conditioning and finishing.
* Ideal for removing paint and paint on wood, stone, metal and fiberglass surfaces.
Specification:
* Material: Stainless Steel Aluminum
* Color: Purple(As pictures show)
* Grit: 46 Grit
* Diameter: 100mm / 4"(Approx.)
* Hole Size: 16mm, 5/8"(Approx.)
* Maximum RPM: 15300 / min
Package Contents:
5 * Grinding Wheels
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Lathe Morse Taper Cutter Equipment Metalworking Silver Bearing Spindle
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* MT2 0.001 inch CNC precision long spindle lathe center taper tool
* Perfectly designed for high speed lathes and CNC lathes for high accuracy
* Triple ball bearing design, extended long spindle with CNC point to increase wheel clearance
* Made from high-quality steel, strong and highly abrasion resistant
* The shaft is made of alloy steel through heat treatment, high rigidity and durability
Specification:
* Name: MT2 Taper Movable Triple Bearing
* Axe Axis: T10 Steel, Quenching Hardness: 55-60HRC
* Main Parts: 40CR Steel, Quenching Hardness: 45-50HRC
* Max Speed: 5000
* Hardness After Treatment: HRc60o ± 2o
* Color: Silver (As pictures show)
* Accuracy: 0.001 Inch
* Optional Types: Type1, Type2, Type3, Type4, Type5, Type6, Type7
Package Contents:
1*Lathe Live Center Taper Tool
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Lathe Morse Taper Cutter Equipment Metalworking Silver Bearing Spindle
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* MT2 0.001 inch CNC precision long spindle lathe center taper tool
* Perfectly designed for high speed lathes and CNC lathes for high accuracy
* Triple ball bearing design, extended long spindle with CNC point to increase wheel clearance
* Made from high-quality steel, strong and highly abrasion resistant
* The shaft is made of alloy steel through heat treatment, high rigidity and durability
Specification:
* Name: MT2 Taper Movable Triple Bearing
* Axe Axis: T10 Steel, Quenching Hardness: 55-60HRC
* Main Parts: 40CR Steel, Quenching Hardness: 45-50HRC
* Max Speed: 5000
* Hardness After Treatment: HRc60o ± 2o
* Color: Silver (As pictures show)
* Accuracy: 0.001 Inch
* Optional Types: Type1, Type2, Type3, Type4, Type5, Type6, Type7
Package Contents:
1*Lathe Live Center Taper Tool
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Lathe Morse Taper Cutter Equipment Metalworking Silver Bearing Spindle
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* MT2 0.001 inch CNC precision long spindle lathe center taper tool
* Perfectly designed for high speed lathes and CNC lathes for high accuracy
* Triple ball bearing design, extended long spindle with CNC point to increase wheel clearance
* Made from high-quality steel, strong and highly abrasion resistant
* The shaft is made of alloy steel through heat treatment, high rigidity and durability
Specification:
* Name: MT2 Taper Movable Triple Bearing
* Axe Axis: T10 Steel, Quenching Hardness: 55-60HRC
* Main Parts: 40CR Steel, Quenching Hardness: 45-50HRC
* Max Speed: 5000
* Hardness After Treatment: HRc60o ± 2o
* Color: Silver (As pictures show)
* Accuracy: 0.001 Inch
* Optional Types: Type1, Type2, Type3, Type4, Type5, Type6, Type7
Package Contents:
1*Lathe Live Center Taper Tool
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Lathe Morse Taper Cutter Equipment Metalworking Silver Bearing Spindle
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* MT2 0.001 inch CNC precision long spindle lathe center taper tool
* Perfectly designed for high speed lathes and CNC lathes for high accuracy
* Triple ball bearing design, extended long spindle with CNC point to increase wheel clearance
* Made from high-quality steel, strong and highly abrasion resistant
* The shaft is made of alloy steel through heat treatment, high rigidity and durability
Specification:
* Name: MT2 Taper Movable Triple Bearing
* Axe Axis: T10 Steel, Quenching Hardness: 55-60HRC
* Main Parts: 40CR Steel, Quenching Hardness: 45-50HRC
* Max Speed: 5000
* Hardness After Treatment: HRc60o ± 2o
* Color: Silver (As pictures show)
* Accuracy: 0.001 Inch
* Optional Types: Type1, Type2, Type3, Type4, Type5, Type6, Type7
Package Contents:
1*Lathe Live Center Taper Tool
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Lathe Morse Taper Cutter Equipment Metalworking Silver Bearing Spindle
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* MT2 0.001 inch CNC precision long spindle lathe center taper tool
* Perfectly designed for high speed lathes and CNC lathes for high accuracy
* Triple ball bearing design, extended long spindle with CNC point to increase wheel clearance
* Made from high-quality steel, strong and highly abrasion resistant
* The shaft is made of alloy steel through heat treatment, high rigidity and durability
Specification:
* Name: MT2 Taper Movable Triple Bearing
* Axe Axis: T10 Steel, Quenching Hardness: 55-60HRC
* Main Parts: 40CR Steel, Quenching Hardness: 45-50HRC
* Max Speed: 5000
* Hardness After Treatment: HRc60o ± 2o
* Color: Silver (As pictures show)
* Accuracy: 0.001 Inch
* Optional Types: Type1, Type2, Type3, Type4, Type5, Type6, Type7
Package Contents:
1*Lathe Live Center Taper Tool
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Lathe Morse Taper Cutter Equipment Metalworking Silver Bearing Spindle
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* MT2 0.001 inch CNC precision long spindle lathe center taper tool
* Perfectly designed for high speed lathes and CNC lathes for high accuracy
* Triple ball bearing design, extended long spindle with CNC point to increase wheel clearance
* Made from high-quality steel, strong and highly abrasion resistant
* The shaft is made of alloy steel through heat treatment, high rigidity and durability
Specification:
* Name: MT2 Taper Movable Triple Bearing
* Axe Axis: T10 Steel, Quenching Hardness: 55-60HRC
* Main Parts: 40CR Steel, Quenching Hardness: 45-50HRC
* Max Speed: 5000
* Hardness After Treatment: HRc60o ± 2o
* Color: Silver (As pictures show)
* Accuracy: 0.001 Inch
* Optional Types: Type1, Type2, Type3, Type4, Type5, Type6, Type7
Package Contents:
1*Lathe Live Center Taper Tool
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Lathe Morse Taper Cutter Equipment Metalworking Silver Bearing Spindle
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* MT2 0.001 inch CNC precision long spindle lathe center taper tool
* Perfectly designed for high speed lathes and CNC lathes for high accuracy
* Triple ball bearing design, extended long spindle with CNC point to increase wheel clearance
* Made from high-quality steel, strong and highly abrasion resistant
* The shaft is made of alloy steel through heat treatment, high rigidity and durability
Specification:
* Name: MT2 Taper Movable Triple Bearing
* Axe Axis: T10 Steel, Quenching Hardness: 55-60HRC
* Main Parts: 40CR Steel, Quenching Hardness: 45-50HRC
* Max Speed: 5000
* Hardness After Treatment: HRc60o ± 2o
* Color: Silver (As pictures show)
* Accuracy: 0.001 Inch
* Optional Types: Type1, Type2, Type3, Type4, Type5, Type6, Type7
Package Contents:
1*Lathe Live Center Taper Tool
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Black Boring Bar Holder Alloy Steel 20x200mm WNMG0804 Durable Practical
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* S20R-MWLNR08 20x200mm Lathe Boring Bar Turning Tool Wrench For WNMG0804
* High temperature heat treatment, high hardness, high precision, extremely resistant, long service life.
* Elegant appearance and rigorous craftsmanship. Good low temperature impact toughness and improved cutting performance.
Specification:
* Model: S20R-MWLNR08
* Tool Bar Material: Alloy Steel
* Lead Angle: 95 Degrees
* Direction: Right Hand
* Suitable Insert: WNMG0804 (Not Included)
* Stem Diameter: 20mm / 0.79 "(Approx.)
* Total Length: 200mm / 7.87 "(Approx.)
* Colour: Black (As pictures show)
Package Contents:
1 * Lathe Boring Bar Holder
2 * Hexagon Wrenches
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10x 4 Inch Sanding Flap Wheel 120 Grit For Angle Grinder Metal Grinding Tools
Details:
*100% brand new and high quality
*Hard-wearing, long service life.
*100mm/4 inch Flap Discs Wheels for Metal Grinding and Sanding.
*Ideal for use on wood, metal and plastic, especially suitable for stainless steel also great for mild steel.
*Application: Grinding, stock removal, rust removal, edge chamfering/beveling, weld blending, paint cleaning and finishing.
*Ideal for Home, Workshop, Hobbyists, Tradesmen, Builders and DIY Enthusiasts, etc.
*Designed for use with all 100mm (4") angle grinders.
*Color: Reddish Brown (As Pictures Show)
*Diameter: 100 mm / 4 inch (Approx.)
*Bore Diameter: 16mm / 5/8 inch (Approx.)
*Grit: 120 #
*Material: Alumina
Package Contents:
10*Flap Sanding Discs
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

6mm x22mm Drill Single Flute Spiral Cutters End Mills Tungsten carbide
Features:
100% brand new and high quality
Made of high-quality materials, durable
This is a set of single-edge end mill cutting tools for industrial milling applications.
It is different from drill bits in application, geometry and manufacturing.
Single flute end mills are used for excellent chip removal in high-speed milling.
These end mills are made of tungsten carbide and can withstand more heat while still maintaining good hardness.
This set of end mills is made of high-quality tungsten carbide with good hardness and very sharp cutting edges.
A 6mm cutting edge and a 6mm standard shank diameter will fit many milling machines or CNC cutting machines.
The single-edge design of the end mill has a sharp cutting edge, which provides a smooth cutting surface and chip removal.
Usually, these end mills are used to cut acrylic, PVC, MDF, density board and many other soft materials.
Product parameters:
Material: Tungsten carbide
Blade diameter: 6mm / 0.23"
Number of blades: 1
Shank diameter: 6mm / 0.23"
Blade length: 22mm / 0.86"
Total length: about 45 mm / 1.77 inches
Cutting: Acrylic, PVC, MDF, MDF, etc.
Quantity: 5
Package list:
5 *End mill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Turning Tool Holder HL1814 Clamp 10pcs TNMG160408-MA TNMG332-MA Durable
Item Details:
*MTJNR1616H16 Lathe Turning Tool Holder 10pcs TNMG160408-MA TNMG332-MA VP15TF
*100% brand new and high quality
*Holder: MTJNR1616H1616
*Size: 16mm*100mm (Approx)
*Inserts: TNMG160408-MA / TNMG332-MA VP15TF
*Shim seat: ST1603
*Wrench: L2.0, L3.0
*Clamp: HL1814
*Clamp screw: MCS625
*Pin: CTM513
*Direction: Right hand
Package Contents:
1 Set of Lathe Turning Tool Holder
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Kit Turning Tool Holder 16mm*100mm Replacement MTJNR1616H16 High quality
Item Details:
*MTJNR1616H16 Lathe Turning Tool Holder 10pcs TNMG160408-MA TNMG332-MA VP15TF
*100% brand new and high quality
*Holder: MTJNR1616H1616
*Size: 16mm*100mm (Approx)
*Inserts: TNMG160408-MA / TNMG332-MA VP15TF
*Shim seat: ST1603
*Wrench: L2.0, L3.0
*Clamp: HL1814
*Clamp screw: MCS625
*Pin: CTM513
*Direction: Right hand
Package Contents:
1 Set of Lathe Turning Tool Holder
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.