Munka és szerszámtartás

Lathe Threading Boring Turning Accessories Holder 10pcs 11IR A60 Insert Blade
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*High grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing
*Unmatched performance with tight tolerances;
*The actual and various treatment environments, even in very dirty environments such as cast iron, have good function;
*User clamping and convenient replacement, just replace the insert and pad with a wrench;
*The attached steel is good and has a long service life, which reduces the user cost of the tool.
*Applicable To: Semi-Finishing, Finishing
*Material: Stainless Steel
*Tool Holder Model: SNR0010K11
*Full Length: 125mm / 5 Inches(Approx.)
Package Contents:
1*SNR0010K11 Holder
1*Wrench
10*Insert
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Collet Chuck Lathe 1mm-10mm Replacement Equipment Metalworking Durable
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Selected high quality carbon steel. Hardened and precision ground.
* Large clamping force and large clamping range, widely used in machining centers, ordinary milling machines, CNC milling machines, engraving machines, high-speed machines, etc. (Used with ER16 nuts.)
* 10Pcs ER16 1mm-10mm Collet Set CNC Milling Engraving Tool
Specification:
* Name: Collet Chuck
* Model: 120259
* Type: Machine Tool Accessories
* Applicable Machine: CNC Machine
* Precision: 0.008mm
* Model: ER16 (10pcs, 1mm-10mm)
(1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm)
The Correct Way To Install The Collet Nut:
1.Put the chuck into the pressure cap, and gently turn the clamping spring. When the pressure is eccentric, the groove on the cover is a clamping spring groove. Push the clamp spring in the direction of the arrow and use equal force to install the pressure cover.
2.Install the clamping spring and cover on the chuck body or spindle together. After inserting and clamping after wiping the cylindrical handle, use a wrench to tighten the pressure cap until the tool is firmly clamped before use.
(Caution: Avoid tightening the pressure cap of the unmounted tool to avoid damaging the clamping spring)
3.Use a wrench to loosen the pressure cover, remove the chuck or tool, and remove the tool. Push out the clamping spring in the direction of the direction arrow. Then replace other clamping springs as needed.
Package Contents:
10 * ER16 Collets
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Set Collet Chuck Lathe 1mm-10mm Replacement Equipment Metalworking Durable
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Selected high quality carbon steel. Hardened and precision ground.
* Large clamping force and large clamping range, widely used in machining centers, ordinary milling machines, CNC milling machines, engraving machines, high-speed machines, etc. (Used with ER16 nuts.)
* 10Pcs ER16 1mm-10mm Collet Set CNC Milling Engraving Tool
Specification:
* Name: Collet Chuck
* Model: 120259
* Type: Machine Tool Accessories
* Applicable Machine: CNC Machine
* Precision: 0.008mm
* Model: ER16 (10pcs, 1mm-10mm)
(1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm)
The Correct Way To Install The Collet Nut:
1.Put the chuck into the pressure cap, and gently turn the clamping spring. When the pressure is eccentric, the groove on the cover is a clamping spring groove. Push the clamp spring in the direction of the arrow and use equal force to install the pressure cover.
2.Install the clamping spring and cover on the chuck body or spindle together. After inserting and clamping after wiping the cylindrical handle, use a wrench to tighten the pressure cap until the tool is firmly clamped before use.
(Caution: Avoid tightening the pressure cap of the unmounted tool to avoid damaging the clamping spring)
3.Use a wrench to loosen the pressure cover, remove the chuck or tool, and remove the tool. Push out the clamping spring in the direction of the direction arrow. Then replace other clamping springs as needed.
Package Contents:
10 * ER16 Collets
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Parts Drill Bit Accessory 1.5-10mm Tungsten Carbide Tool Practical Useful
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*New condition with no chips or usage, flawless
*The wearing of safety glasses is required during the process of operation as cutting tools may shatter if broken
*Suitable for: die block steel, wrought iron, carbon steel, alloy steel, chisel tool steel, general iron material, etc
*Brief outward, lively, unique, distinct
Specifications:
*Material: HSS
*Flute: 4
*Size:(Approx.)
Cutter Diameter 1.5mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm
Shank Diameter: 6mm, 6mm, 6mm, 6mm, 6mm, 6mm, 8mm, 8mm, 10mm, 10mm
Blade Length: 7mm, 10mm, 12mm, 14mm, 15mm, 15mm, 18mm, 20mm, 27mm, 28mm
Total Length: 51mm, 51mm, 56mm, 55mm, 56mm, 56mm, 59mm, 63mm, 70mm, 71mm
Package Contents:
10 X 4 Flute End Mill Cutter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Warm Tips:
Color will be sent at random, thank you for your understanding.
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* YBC251 hard alloy CNC cutting, high precision, good toughness, high hardness, wear resistance,
* Strong resistance to impact, thermal cracking and deformation.
* High cutting efficiency, long service life, suitable for semi-finishing of steel.
Specification:
Cut-Off Tool
* Model: SPB26-3
* Material: Metal
* Length: 110 mm(Approx.)
* Thickness: 2.4 mm(Approx.)
* Insert Height: 26 mm(Approx.)
Insert
* Model: ZQMX3N11-1E
* Material: Coated Carbide
* Color: Gold (As pictures show)
* Width: 3mm(Approx.)
* Quantity: 10pcs/Box
Package Contents:
1 * SPB26-3 Cut-Off Tool
10 * Slotted Groove Inserts
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

MGIVR2016-3 Bar L Wrench Parting Grooving Cut-Off Holder MGMN300 Insert Parts
Item Details:
*100% brand new and high quality
*Model: MGIVR2016-3
*Handle length: 16mm (Approx)
*Overall length: 150mm (Approx)
*Accept Insert :MGMN300
*Cutting width: 3mm (Approx)
Package Contents:
1*MGIVR2016-3 Bar
1*L Wrench
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Boring bar Turning tool Set Cutter Insert Equipment Practical Industrial
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*High grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing
*Unmatched performance with tight tolerances;
*The actual and various treatment environments, even in very dirty environments such as cast iron, have good function;
*User clamping and convenient replacement, just replace the insert and pad with a wrench;
*The attached steel is good and has a long service life, which reduces the user cost of the tool.
*Applicable To: Semi-Finishing, Finishing
*Material: Stainless Steel
*Tool Holder Model: SNR0010K11
*Full Length: 125mm / 5 Inches(Approx.)
Package Contents:
1*SNR0010K11 Holder
1*Wrench
10*Insert
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

L Wrench Cut-Off Holder Set Hand Tool Boring 16x150mm Replacement Metalworking
Item Details:
*100% brand new and high quality
*Model: MGIVR2016-3
*Handle length: 16mm (Approx)
*Overall length: 150mm (Approx)
*Accept Insert :MGMN300
*Cutting width: 3mm (Approx)
Package Contents:
1*MGIVR2016-3 Bar
1*L Wrench
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Boring Lathe Turning Tool Machining Wrench T15 Boring Machining High Quality
Details:
Condition: 100% brand new
Model: SCMCN1212H09-80
Shank Diameter: 12mm
Shank Length: 100mm
Screw: M4*8
Wrench: T15
Accept Insert: 10PCS CCMT09T304 VP15TF
Package Contents:
1 * Holder
1 * Wrench
10 * Inserts
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

10pcs ER16 1mm-10mm Spring Collet Chuck Set CNC Milling-Lathe Engraving Tool
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Selected high quality carbon steel. Hardened and precision ground.
* Large clamping force and large clamping range, widely used in machining centers, ordinary milling machines, CNC milling machines, engraving machines, high-speed machines, etc. (Used with ER16 nuts.)
* 10Pcs ER16 1mm-10mm Collet Set CNC Milling Engraving Tool
Specification:
* Name: Collet Chuck
* Model: 120259
* Type: Machine Tool Accessories
* Applicable Machine: CNC Machine
* Precision: 0.008mm
* Model: ER16 (10pcs, 1mm-10mm)
(1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm)
The Correct Way To Install The Collet Nut:
1.Put the chuck into the pressure cap, and gently turn the clamping spring. When the pressure is eccentric, the groove on the cover is a clamping spring groove. Push the clamp spring in the direction of the arrow and use equal force to install the pressure cover.
2.Install the clamping spring and cover on the chuck body or spindle together. After inserting and clamping after wiping the cylindrical handle, use a wrench to tighten the pressure cap until the tool is firmly clamped before use.
(Caution: Avoid tightening the pressure cap of the unmounted tool to avoid damaging the clamping spring)
3.Use a wrench to loosen the pressure cover, remove the chuck or tool, and remove the tool. Push out the clamping spring in the direction of the direction arrow. Then replace other clamping springs as needed.
Package Contents:
10 * ER16 Collets
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Boring Lathe Tool Turning Wrench T15 Boring Machining 10pcs Useful High Quality
Details:
Condition: 100% brand new
Model: SCMCN1212H09-80
Shank Diameter: 12mm
Shank Length: 100mm
Screw: M4*8
Wrench: T15
Accept Insert: 10PCS CCMT09T304 VP15TF
Package Contents:
1 * Holder
1 * Wrench
10 * Inserts
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Drilling Spring Collets Tapping ER11 Tool Holder Metalworking Portable
Features:
*100% brand new and high quality
*Durable and practical
*Special angled slots increase rigidity
*Protects tool holder from contamination
*Overall better balance of tool holder assembly
*Use with any ER chuck for coolant-thru tool applications
Specifications:
*Color: As Pictures Show
*MATERIAL: High Grade 1065 Carbon Steel
*Accuracy: 0.0003" or 5um
*Gripping Range: 1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5 mm,5 mm,5.5 mm,6 mm,6.5 mm,7mm,1/4",1/8" (Approx.)
*Upper diameter: 12mm (Approx.)
*Bottom diameter: 8mm (Approx.)
*Height: 20mm (Approx.)
*Suitable For: Drilling, Milling, Drilling, Tapping, Engraving, CNC, Spindle machines, and other processing
Package Contents:
15*ER11 Spring Collet
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Wrench Turning Tools Holder Threading Boring Bar Accessories CCMT09T304
Item Details:
*100% brand new and high quality
* Made of high quality material, durable and practical to use
* Suitable carbide insert size: CCMT09T304
* High wear resistance and high hardness processing, with very good wear resistance
* This product can reduce processing costs and improve efficiency
* The main body and other parts are all precision grinding to eliminate the imbalance and improve the safety during cutting.
* Material: 42cr
* Mast Model: SCLCR1212H09
* Total Length: 100 mm(Approx.)
Warm Tips:
The color of the wrench will be sent randomly
Package Contents:
1*Mast
1*T15 Wrench
10*Insert
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Metal SPB26-3 26mm Parting Grooving/Cut-Off Tool & 10X GTN-3 SP300 Inserts Kit
Warm Tips:
Color will be sent at random, thank you for your understanding.
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* YBC251 hard alloy CNC cutting, high precision, good toughness, high hardness, wear resistance,
* Strong resistance to impact, thermal cracking and deformation.
* High cutting efficiency, long service life, suitable for semi-finishing of steel.
Specification:
Cut-Off Tool
* Model: SPB26-3
* Material: Metal
* Length: 110 mm(Approx.)
* Thickness: 2.4 mm(Approx.)
* Insert Height: 26 mm(Approx.)
Insert
* Model: ZQMX3N11-1E
* Material: Coated Carbide
* Color: Gold (As pictures show)
* Width: 3mm(Approx.)
* Quantity: 10pcs/Box
Package Contents:
1 * SPB26-3 Cut-Off Tool
10 * Slotted Groove Inserts
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Drill Bit Accessory 10pcs/set Tool HSS End Milling Cutter Slot Durable
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*New condition with no chips or usage, flawless
*The wearing of safety glasses is required during the process of operation as cutting tools may shatter if broken
*Suitable for: die block steel, wrought iron, carbon steel, alloy steel, chisel tool steel, general iron material, etc
*Brief outward, lively, unique, distinct
Specifications:
*Material: HSS
*Flute: 4
*Size:(Approx.)
Cutter Diameter 1.5mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm
Shank Diameter: 6mm, 6mm, 6mm, 6mm, 6mm, 6mm, 8mm, 8mm, 10mm, 10mm
Blade Length: 7mm, 10mm, 12mm, 14mm, 15mm, 15mm, 18mm, 20mm, 27mm, 28mm
Total Length: 51mm, 51mm, 56mm, 55mm, 56mm, 56mm, 59mm, 63mm, 70mm, 71mm
Package Contents:
10 X 4 Flute End Mill Cutter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Drill Bit Accessory 10pcs/set Tool 4 Flutes End Milling Cutter Slot Practical
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*New condition with no chips or usage, flawless
*The wearing of safety glasses is required during the process of operation as cutting tools may shatter if broken
*Suitable for: die block steel, wrought iron, carbon steel, alloy steel, chisel tool steel, general iron material, etc
*Brief outward, lively, unique, distinct
Specifications:
*Material: HSS
*Flute: 4
*Size:(Approx.)
Cutter Diameter 1.5mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm
Shank Diameter: 6mm, 6mm, 6mm, 6mm, 6mm, 6mm, 8mm, 8mm, 10mm, 10mm
Blade Length: 7mm, 10mm, 12mm, 14mm, 15mm, 15mm, 18mm, 20mm, 27mm, 28mm
Total Length: 51mm, 51mm, 56mm, 55mm, 56mm, 56mm, 59mm, 63mm, 70mm, 71mm
Package Contents:
10 X 4 Flute End Mill Cutter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

7pcs End Mill R0.5-R4.0 CNC Router Bit Carbide Milling Cutter Tool Tools
Feature:
*100% brand new and high quality
*High quality material of tungsten steel
*Wear-resisting and Not easy to stick milling cutter
*The blade by mirror grinding process,high efficiency of chip removal
*Speed machining and High degree of smoothness
*Strong and Continuous machining is not easy to break
*Applicable to the hardness below HRC70
Specification:
*Type: Ball Nose End Mill
*Material: Tungsten Carbide
*Coating: TiAIN Coating
*HRC: 50
*Set including: R0.5 R0.75 R1.0 R1.5 R2.0 R2.5 R3.0 R4.0
*Application: Suit for cutting Wood , Plastic, Acrylic plate
Package Including:
7pcs Ball Nose End Mill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

End Mill R0.5-R4.0 CNC Router Bit Carbide Milling Cutter 7 piece Tool Kit
Feature:
*100% brand new and high quality
*High quality material of tungsten steel
*Wear-resisting and Not easy to stick milling cutter
*The blade by mirror grinding process,high efficiency of chip removal
*Speed machining and High degree of smoothness
*Strong and Continuous machining is not easy to break
*Applicable to the hardness below HRC70
Specification:
*Type: Ball Nose End Mill
*Material: Tungsten Carbide
*Coating: TiAIN Coating
*HRC: 50
*Set including: R0.5 R0.75 R1.0 R1.5 R2.0 R2.5 R3.0 R4.0
*Application: Suit for cutting Wood , Plastic, Acrylic plate
Package Including:
7pcs Ball Nose End Mill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Warm Tips:
Color will be sent at random, thank you for your understanding.
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* YBC251 hard alloy CNC cutting, high precision, good toughness, high hardness, wear resistance,
* Strong resistance to impact, thermal cracking and deformation.
* High cutting efficiency, long service life, suitable for semi-finishing of steel.
Specification:
Cut-Off Tool
* Model: SPB26-3
* Material: Metal
* Length: 110 mm(Approx.)
* Thickness: 2.4 mm(Approx.)
* Insert Height: 26 mm(Approx.)
Insert
* Model: ZQMX3N11-1E
* Material: Coated Carbide
* Color: Gold (As pictures show)
* Width: 3mm(Approx.)
* Quantity: 10pcs/Box
Package Contents:
1 * SPB26-3 Cut-Off Tool
10 * Slotted Groove Inserts
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Carbide inserts 10 Pieces CNC Tool APGT1604PDFR-G2 HTi10 Accessory Parts Durable
Product description:
100% brand new and high quality
Blade type: turning blade
Blade material: cemented carbide
Model: APGT1604PDFR-G2 HTi10
Package list:
10*APGT1604PDFR-G2 HTi10 blade
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

End Milling Cutter Slot Drill Bit 1.5-10mm Parts 4 Flutes HSS New Durable
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*New condition with no chips or usage, flawless
*The wearing of safety glasses is required during the process of operation as cutting tools may shatter if broken
*Suitable for: die block steel, wrought iron, carbon steel, alloy steel, chisel tool steel, general iron material, etc
*Brief outward, lively, unique, distinct
Specifications:
*Material: HSS
*Flute: 4
*Size:(Approx.)
Cutter Diameter 1.5mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm
Shank Diameter: 6mm, 6mm, 6mm, 6mm, 6mm, 6mm, 8mm, 8mm, 10mm, 10mm
Blade Length: 7mm, 10mm, 12mm, 14mm, 15mm, 15mm, 18mm, 20mm, 27mm, 28mm
Total Length: 51mm, 51mm, 56mm, 55mm, 56mm, 56mm, 59mm, 63mm, 70mm, 71mm
Package Contents:
10 X 4 Flute End Mill Cutter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

HSS Drill Bit 10pcs/set Tool 4 Flutes Accessory End Milling Cutter Slot Useful
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*New condition with no chips or usage, flawless
*The wearing of safety glasses is required during the process of operation as cutting tools may shatter if broken
*Suitable for: die block steel, wrought iron, carbon steel, alloy steel, chisel tool steel, general iron material, etc
*Brief outward, lively, unique, distinct
Specifications:
*Material: HSS
*Flute: 4
*Size:(Approx.)
Cutter Diameter 1.5mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm
Shank Diameter: 6mm, 6mm, 6mm, 6mm, 6mm, 6mm, 8mm, 8mm, 10mm, 10mm
Blade Length: 7mm, 10mm, 12mm, 14mm, 15mm, 15mm, 18mm, 20mm, 27mm, 28mm
Total Length: 51mm, 51mm, 56mm, 55mm, 56mm, 56mm, 59mm, 63mm, 70mm, 71mm
Package Contents:
10 X 4 Flute End Mill Cutter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Bit Holder Tool ER11 Collets 11.5 x 7 x 3 cm New High quality Precision Durable
Item Details:
100% brand new and high quality
Made of high quality material, durable and practical to use
Are you looking for a set professional, yet affordable spring collet? Are you in search of a sturdy, trustworthy tool that can do multiple jobs at once? If yes, look no further! Our professional spring collet set must meet you needs. It is one of the best choices for you.
Available in the BT ER extension rod handle, can be used for clamping drill, milling tool, straight shank tool.
Performance stability, high accuracy and wear-resistant.
Large holding force, wide clamping range.
Spiral collets are widely used in boring, milling, drilling, tapping, grinding, and engraving, and so on.
Color: As pictures show
Size: 11.5 x 7 x 3 cm.(Approx.)
Material: Steel.
Accuracy: 0.0003" or 5um
Gripping Range: 1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5 mm,5 mm,5.5 mm,6 mm,6.5 mm,7mm,1/4",1/8"
Package Contents:
15*ER11 Collets(1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 1/8" ,1/4")
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Warm Tips:
Color will be sent at random, thank you for your understanding.
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* YBC251 hard alloy CNC cutting, high precision, good toughness, high hardness, wear resistance,
* Strong resistance to impact, thermal cracking and deformation.
* High cutting efficiency, long service life, suitable for semi-finishing of steel.
Specification:
Cut-Off Tool
* Model: SPB26-3
* Material: Metal
* Length: 110 mm(Approx.)
* Thickness: 2.4 mm(Approx.)
* Insert Height: 26 mm(Approx.)
Insert
* Model: ZQMX3N11-1E
* Material: Coated Carbide
* Color: Gold (As pictures show)
* Width: 3mm(Approx.)
* Quantity: 10pcs/Box
Package Contents:
1 * SPB26-3 Cut-Off Tool
10 * Slotted Groove Inserts
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Mini Bore Inner Hole Turning Tool Holder SHB250-5 Carbide Boring Bar Accessory
Details:
Condition: 100% brand new and high quality
Material: Carbide
Model: SHB16-6/ SHB20-3/ SHB20-5/ SHB20-6/ SHB20-7/ SHB20-8/SHB2010 (please select)
Color: Black Silver (As Picture Show)
Package Contents:
1 * Turning Tool Holder
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

With GTN-3 SP300 Inserts Cut-Off Tool Semi-finishing 26mm Grooving New Useful
Warm Tips:
Color will be sent at random, thank you for your understanding.
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* YBC251 hard alloy CNC cutting, high precision, good toughness, high hardness, wear resistance,
* Strong resistance to impact, thermal cracking and deformation.
* High cutting efficiency, long service life, suitable for semi-finishing of steel.
Specification:
Cut-Off Tool
* Model: SPB26-3
* Material: Metal
* Length: 110 mm(Approx.)
* Thickness: 2.4 mm(Approx.)
* Insert Height: 26 mm(Approx.)
Insert
* Model: ZQMX3N11-1E
* Material: Coated Carbide
* Color: Gold (As pictures show)
* Width: 3mm(Approx.)
* Quantity: 10pcs/Box
Package Contents:
1 * SPB26-3 Cut-Off Tool
10 * Slotted Groove Inserts
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

20x SP200 NC3020 GTN-2 Grooving Cut-Off Carbide Inserts Turning Tool Equipment
Details:
20pcs SP200 NC3020 GTN-2 Grooving Cut-Off Carbide Inserts 2mm Width ZQMX2N11-1E
Condition: 100% brand new
Color: As Picture Show
Quantity: 20pcs/kit
Package Contents:
20 * Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Wear resistance Inserts Cutter Turning tools Metalworking Toolholding Useful
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*High strength and hardness.
*High cutting efficiency and high wear resistance.
*Good precision and high toughness.
*Extremely strong impact resistance, thermal crack resistance and deformation resistance.
*Suitable for semi-finishing of steel.
Specification:
Cutter:
*Model: SPB26 -3
*Material: Metal
*Length: 110 mm(Approx.)
*Thickness: 2.4 mm(Approx.)
*Cutter Height: 26 mm(Approx.)
Slotted Cutter
*Material: Coated Carbide
*Color: Gold(As pictures show)
*Width: 3 mm(Approx.)
*Quantity: 10pcs
Package Contents:
1 * SPB26-3 Cutter (Color Sent At Random )
10 * Grooving Cutter
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

2mm Width Inserts ZQMX2N11-1E 20pcs Accessories Kit Box NC3020 New 2019
Details:
20pcs SP200 NC3020 GTN-2 Grooving Cut-Off Carbide Inserts 2mm Width ZQMX2N11-1E
Condition: 100% brand new
Color: As Picture Show
Quantity: 20pcs/kit
Package Contents:
20 * Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

2mm Width Inserts ZQMX2N11-1E Accessories Set Box SP200 NC3020 New 2019
Details:
20pcs SP200 NC3020 GTN-2 Grooving Cut-Off Carbide Inserts 2mm Width ZQMX2N11-1E
Condition: 100% brand new
Color: As Picture Show
Quantity: 20pcs/kit
Package Contents:
20 * Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

20pcs SP200 NC3020 GTN-2 Carbide Inserts ZQMX2N11-1E CNC Metalworking Tools Set
Details:
20pcs SP200 NC3020 GTN-2 Grooving Cut-Off Carbide Inserts 2mm Width ZQMX2N11-1E
Condition: 100% brand new
Color: As Picture Show
Quantity: 20pcs/kit
Package Contents:
20 * Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

MWMNN 2020K08 Carbon Steel Lathe External Index Turning Tools Holder L Wrench
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Model: MWMNN 2020K08
*Material: Carbon Steel
*Direction: Right Hand
*Tool Cutting Edge Angle: 50°
*Square Handle (WxH): 25mm x 25mm(Approx.)
*Total Length: 125mm(Approx.)
Package Contents:
1*External Tool Holder
1*"L" Wrench
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Thread Carbide insert Equipment Tools Coated Carbide Set Kit GTN-3 SP300
Features:
*100% brand new and high quality
*Carbide CNC cutting, Good precision high toughness, high hard, wear-resistant,
*Strong shock resistance, thermal cracking and resistance to deformation
*High cutting efficiency, long service life, suitable for steel semi-finishing
Specifications:
*Model: SPB26 -3
*Material: Metal
*Length: 110 mm (Approx.)
*Thickness: 2.4 mm (Approx.)
*Blade Height : 26 mm (Approx.)
*Insert:
Material: Coated Carbide
Color: Gold (As Pictures Show)
Width: 3mm (Approx.)
Package Contents:
1*SPB26-3 Cut-Off Blade
10*Cut-Off Grooving Partting Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

10pcs GTN-3 SP300 Inserts SPB26-3 26mm Parting Grooving Cut-Off Tool Holder
Features:
*100% brand new and high quality
*Carbide CNC cutting, Good precision high toughness, high hard, wear-resistant,
*Strong shock resistance, thermal cracking and resistance to deformation
*High cutting efficiency, long service life, suitable for steel semi-finishing
Specifications:
*Model: SPB26 -3
*Material: Metal
*Length: 110 mm (Approx.)
*Thickness: 2.4 mm (Approx.)
*Blade Height : 26 mm (Approx.)
*Insert:
Material: Coated Carbide
Color: Gold (As Pictures Show)
Width: 3mm (Approx.)
Package Contents:
1*SPB26-3 Cut-Off Blade
10*Cut-Off Grooving Partting Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Lathe grooving Holder Stainless 10pcs MGMN200 Parting off Turning Durable
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* High grip, impact resistance and strong, clear speed advantage
Cutting off large processing;
* Maintain tight tolerances and unparalleled performance;
* Practical and various treatment environments, even in very dirty environments, such as cast iron has good characteristics;
* User clamping is easy to replace, just use a wrench to complete
Replace the insert and mat;
*The fitting steel is good and the service life is long, which reduces the use cost of the tool.
Specification:
* Material: Stainless Steel
* Model: MGEHR1616-2
* Total Length: 100mm / 4inch(Approx.)
* Applicable to: Semi-Finishing, Finishing
Package Contents:
1*MGEHR1616-2 Tool Holder
10*Insert
1*Wrench
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

11Pcs/Set 3mm Coated Carbide Lathe Grooving &Cut Off Tool Holder / Inserts Tools
Warm Tips:
Color will be sent at random, thank you for your understanding.
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* YBC251 hard alloy CNC cutting, high precision, good toughness, high hardness, wear resistance,
* Strong resistance to impact, thermal cracking and deformation.
* High cutting efficiency, long service life, suitable for semi-finishing of steel.
Specification:
Cut-Off Tool
* Model: SPB26-3
* Material: Metal
* Length: 110 mm(Approx.)
* Thickness: 2.4 mm(Approx.)
* Insert Height: 26 mm(Approx.)
Insert
* Model: ZQMX3N11-1E
* Material: Coated Carbide
* Color: Gold (As pictures show)
* Width: 3mm(Approx.)
* Quantity: 10pcs/Box
Package Contents:
1 * SPB26-3 Cut-Off Tool
10 * Slotted Groove Inserts
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Cut-Off Tool 26mm Parting Coated Carbide ZQMX3N11-1E Semi-finishing Practical
Warm Tips:
Color will be sent at random, thank you for your understanding.
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* YBC251 hard alloy CNC cutting, high precision, good toughness, high hardness, wear resistance,
* Strong resistance to impact, thermal cracking and deformation.
* High cutting efficiency, long service life, suitable for semi-finishing of steel.
Specification:
Cut-Off Tool
* Model: SPB26-3
* Material: Metal
* Length: 110 mm(Approx.)
* Thickness: 2.4 mm(Approx.)
* Insert Height: 26 mm(Approx.)
Insert
* Model: ZQMX3N11-1E
* Material: Coated Carbide
* Color: Gold (As pictures show)
* Width: 3mm(Approx.)
* Quantity: 10pcs/Box
Package Contents:
1 * SPB26-3 Cut-Off Tool
10 * Slotted Groove Inserts
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

5Pcs Solid Carbide End Mill Micrograin CNC 2 Flute Slot Drill Bit Cutter 6mm
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Spiral design, greatly improve the cutting speed, smooth and delicate surface.
*Reduce the number of tool changing, improve the machine tool and brake rate.
*High precision, very sharp, wear-resistant.
*High strength and hardness.
*Durable in use.
*Suitable for iron, cast iron, mould steel, alloy steel, welding steel processing etc.
Specifications:
*Material: Solid Carbide & Tungsten coating
*Cutting diameter: approx. 6mm
*Shank diameter: approx. 6mm
*Flute length: approx. 20mm
*Overall length: approx. 50mm
*Quantity:5pcs
Package Contents:
5 x Solid Carbide End Mills
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

20x SP200 NC3020 GTN-2 Grooving Cut-Off Carbide Inserts Blade Kit ZQMX2N11-1E
Details:
20pcs SP200 NC3020 GTN-2 Grooving Cut-Off Carbide Inserts 2mm Width ZQMX2N11-1E
Condition: 100% brand new
Color: As Picture Show
Quantity: 20pcs/kit
Package Contents:
20 * Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

SPB26-3 26mm Lathe Grooving Parting Cutter Tool Holder 10x GTN-3 SP300 Inserts
Features:
*100% brand new and high quality
*Carbide CNC cutting, Good precision high toughness, high hard, wear-resistant,
*Strong shock resistance, thermal cracking and resistance to deformation
*High cutting efficiency, long service life, suitable for steel semi-finishing
Specifications:
*Model: SPB26 -3
*Material: Metal
*Length: 110 mm (Approx.)
*Thickness: 2.4 mm (Approx.)
*Blade Height : 26 mm (Approx.)
*Insert:
Material: Coated Carbide
Color: Gold (As Pictures Show)
Width: 3mm (Approx.)
Package Contents:
1*SPB26-3 Cut-Off Blade
10*Cut-Off Grooving Partting Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

125mm Turning Tool Holder MWMNN 2020K08 Metalworking Equipment Practical
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Model: MWMNN 2020K08
*Material: Carbon Steel
*Direction: Right Hand
*Tool Cutting Edge Angle: 50°
*Square Handle (WxH): 25mm x 25mm(Approx.)
*Total Length: 125mm(Approx.)
Package Contents:
1*External Tool Holder
1*"L" Wrench
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Lathe grooving Stainless Wrench Parting off Turning Holder Carbide Set Useful
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* High grip, impact resistance and strong, clear speed advantage
Cutting off large processing;
* Maintain tight tolerances and unparalleled performance;
* Practical and various treatment environments, even in very dirty environments, such as cast iron has good characteristics;
* User clamping is easy to replace, just use a wrench to complete
Replace the insert and mat;
*The fitting steel is good and the service life is long, which reduces the use cost of the tool.
Specification:
* Material: Stainless Steel
* Model: MGEHR1616-2
* Total Length: 100mm / 4inch(Approx.)
* Applicable to: Semi-Finishing, Finishing
Package Contents:
1*MGEHR1616-2 Tool Holder
10*Insert
1*Wrench
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

ER11 Collets Steel Milling Machine CNC Wear-resistant Durable Practical
Item Details:
100% brand new and high quality
Made of high quality material, durable and practical to use
Are you looking for a set professional, yet affordable spring collet? Are you in search of a sturdy, trustworthy tool that can do multiple jobs at once? If yes, look no further! Our professional spring collet set must meet you needs. It is one of the best choices for you.
Available in the BT ER extension rod handle, can be used for clamping drill, milling tool, straight shank tool.
Performance stability, high accuracy and wear-resistant.
Large holding force, wide clamping range.
Spiral collets are widely used in boring, milling, drilling, tapping, grinding, and engraving, and so on.
Color: As pictures show
Size: 11.5 x 7 x 3 cm.(Approx.)
Material: Steel.
Accuracy: 0.0003" or 5um
Gripping Range: 1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5 mm,5 mm,5.5 mm,6 mm,6.5 mm,7mm,1/4",1/8"
Package Contents:
15*ER11 Collets(1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 1/8" ,1/4")
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Carbon Steel Turning Tool Holder Kit 93 Degree External Lathe CNC Durable Hot
Details:
High quality and brand new.
Model: SVJCR 2020K16
Material: Carbon Steel
Direction: Right Hand
Cutting Edge Angle: 93°
Square Shank(W*H): 20*20mm
Total Length: 125mm
Package Contents:
1 * SVJCR 2020K16 External Turning Tool Holder
1 * Wrench
(inserts not included)
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Spring Collet Parts 120259 Machine Engraving Lathe Tool 10Pcs Equipment
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Select high-quality carbon steel. Hardening and precision grinding. Large clamping force and wide clamping range.
*Widely used in machining centers, general milling machines, CNC milling machines, engraving machines, high-speed machines, etc. (with ER16 nut and support.)
Specification:
*Name: Spring Chuck
*Model: 120259
*Type: Machine Tool Accessories
*Applicable Machine: CNC Machine Tool
*Accuracy: 0.008 mm
*Model: ER16 (10, 1mm-10mm)
(1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm)
The Correct Way To Install The Collet Nut:
1. Put the chuck into the gland and gently rotate the clamping spring. When the eccentric portion is pressed, the cover is recessed into the clamping spring groove. The pressure cap can be installed by pushing the spring with the same force in the direction of the arrow.
2. Install the clamping spring and the cover on the main body or the main shaft of the chuck. After inserting the clamping wiper, tighten the pressure cap with a wrench until the tool is clamped.
(Note: Avoid tightening the pressure cap without tools installed to avoid damaging the clamping spring)
3. Use a wrench to loosen the cap, remove the chuck or tool, and remove the tool. Push the clamping spring along the direction arrow. Then replace the other clamping springs as needed.
Package Contents:
10 * ER16 Spring Collet
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Wrench Turning tool holder Workholding Set Insert Metalworking Durable
Item Details:
*100% brand new and high quality
* Made of high quality material, durable and practical to use
* Suitable for semi-finishing, finishing
* Material: Stainless Steel
* Total Length : 100mm / 4 inches(Approx.)
* Color: As pictures show
Package Contents:
1*SER1212H16 Holder
1*Wrench
10*Insert
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Insert Replacement Holder Carbide 10PCS Turning Tool R390-170408M-PM 1030
Item Details:
*100% brand new and high quality
*High grip, strong impact resistance, clear speed advantage in large cutting and processing
*Unmatched performance with tight tolerances
*Practical and a variety of processing environments, even in very dirty environments, such as cast iron
*User clamping is easy to replace, just replace the blade and gasket with a wrench
*Good fitting steel and long service life, reducing the cost of tools
*Model: R390-170408M-PM 1030
*Material: Carbide
*Color: As Pictures Show
*Quantity:10pcs
Package Contents:
10*Milling Cutters
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

SER1212H16 CNC Tool Holder Boring Bar 10x 16ER AG60 Threading Insert Part Stock
Item Details:
*100% brand new and high quality
* Made of high quality material, durable and practical to use
* Suitable for semi-finishing, finishing
* Material: Stainless Steel
* Total Length : 100mm / 4 inches(Approx.)
* Color: As pictures show
Package Contents:
1*SER1212H16 Holder
1*Wrench
10*Insert
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Turning tool Lathe Threading Holder Blade Boring bar Stainless Steel Durable
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*High grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing
*Unmatched performance with tight tolerances;
*The actual and various treatment environments, even in very dirty environments such as cast iron, have good function;
*User clamping and convenient replacement, just replace the insert and pad with a wrench;
*The attached steel is good and has a long service life, which reduces the user cost of the tool.
*Applicable To: Semi-Finishing, Finishing
*Material: Stainless Steel
*Tool Holder Model: SNR0010K11
*Full Length: 125mm / 5 Inches(Approx.)
Package Contents:
1*SNR0010K11 Holder
1*Wrench
10*Insert
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10* Carbide Inserts Milling Cutting R390-170408M-PM 1030 Lathe Holder Accessory
Item Details:
*100% brand new and high quality
*High grip, strong impact resistance, clear speed advantage in large cutting and processing
*Unmatched performance with tight tolerances
*Practical and a variety of processing environments, even in very dirty environments, such as cast iron
*User clamping is easy to replace, just replace the blade and gasket with a wrench
*Good fitting steel and long service life, reducing the cost of tools
*Model: R390-170408M-PM 1030
*Material: Carbide
*Color: As Pictures Show
*Quantity:10pcs
Package Contents:
10*Milling Cutters
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.