Egyéb üzleti és ipari

Features:
100% brand new and high quality.
The Optical Fiber Amplifier(OFA) refers to a all-optical amplifier used in optical fiber communication lines for signal amplification.
With sensitivity adjustment switch, output indicator and signal indicator.
It belongs to sensor type components, high sensitivity, low delay.
Specially suitable for relay amplification for long-distance optical communications.
Specification:
Model: E3X-NA11
Sensing mode: Light sensation
Voltage: DC 12-24V (brown-positive pole, blue-negative pole, -signal output)
Package list:
1 * Optical Fiber Amplifier
1 * Manual

Features:
Proximity switch, also known as contactless proximity switch, is an electronic on-off sensor.
It has sensing performance, reliable action, stable performance and fast frequency response.
Shockproof, corrosion resistance, strong anti-interference capability.
Non-contact detection, does not affect the operating conditions of the measured object.
No mechanical wear and fatigue damage, long working life.
Sealed structure, good moisture and dust resistance, strong work reliability.
Widely used in machine tools, metallurgy, chemical, textile and printing industries.
Specification:Condition: 100% brand new
Material: brass plated nickel shell, ABS detection
Weight: 145g/5.1oz
Detection distance: 15mm ±10%
Set distance: 0-13mm
Lag distance: less than 10% of the detection distance
Detection object: magnetic metal (the detection distance of non-magnetic metal decreases)
Standard test object: iron 54 * 54 * 1mm
Response frequency: DC: 0.5kHz, AC: 25Hz
Power supply voltage: DC 12-24V (6-36V) ripple (p-p) less than 10% (DC type)
Withstand voltage: AC1000V 50/60Hz 1min between the charging part and the shell
Voltage influence: within the rated power supply voltage range of ±15% , within the detection range of ±10% when it is the rated power supply voltage value
Current consumption:N.P type: below 13mA
D type: below 0.8mA
A type: below 1.7mA
Control output:N.P type: below 300mA
D type: below 200mA
A type: below 400mA
Circuit protection:N.P.D type: reverse connection protection, surge absorption, load short circuit protection
A Type: surge absorption
Ambient temperature: each - 30 to 65 ℃ action and save
Ambient humidity: 35-95% RH each (no ice, no frost) action and save
Temperature influence:
Temperature range -30 to 65 ℃ , 23 ℃, ± 15% detection distance;
Temperature range -25 to 60 ℃, 23 ℃, ± 10% detection distance.
Insulation resistance: more than 50mΩ (DC500 ) charge between parts and the shell
Package List:1 x Proximity Sensor Switch

Features:
These bearings are made of high quality steel for low noise and long service life.
They are double shielded to avoid contaminants entering and save lubricant.
Bearings have a 17mm inner diameter, a 23mm outer diameter, and a 4mm thickness.
These are great for small hobby 17mm shaft/rod projects.
There comes total 10 pieces miniature bearings which you may use for many different projects.
Specification:
Model: 6703ZZ
Material: High-carbon bearing steel
Type: Deep-groove high-speed
Rolling : Single row
Inner Diameter: 17mm / 0.7in
Outer Diameter: 23mm / 0.9in
Thickness: 4mm / 0.2in
Quantity: 10pcs
Weight: 43g / 1.5oz(approx.)
Package list:
10 * Bearings

Feature:
1. The workmanship is very strong, from patch to welding, step by step strict control, carefully made.
2. A set of VCC/GND power supply interfaces, so that each interface can be connected to a single module without sharing a limited power supply pin.
3. Allow the board to connect more modules at the same time for more experiments.
4. The 595 serial digital interface can be connected to the LCD module with a cable.
5. The product is featured with high quality, stable performance and long service life.
Specification:
Item Type: Expansion board .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Model: IO Shield V1
Input Voltage: DC 6-9V
Output Voltage: DC 3.3V/5V
Package List:
1 x Expansion Board

Features:1. 2020 modified fan is suitable for 858D hot air gun.
2. DIY modified high power and powerful fan and are the same size and appearance as the original 2020 fan.
3. No need to polish. consealed handle can be used directly.
4. Strong wind power and large fan. The wind speed is 6000 rev / sec, and the new design current is 0.15A.
5. Current changes according to the change of wind gun voltage during use. Up to 0.18A.
Specifications:Material: ABS Metal
Speed: 6000 rev / min
Weight: 26 g
Input voltage: 24V
Current: 0.2A
Package List:1 * Fan.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Note:Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ording.

Feature:
The screw is made of stainless steel, good corrosion resistance.
Multi sizes of screw meet your different needs.
The screw is exquisite in workmanship and clear in threads.
All the screws and nuts are placed in a box for easy carrying.
Hex screw, easy to use.
Specification:Material: Stainless steel
Type: Button, Flat
Button screw size: M2.5*4\M2.5*6\M2.5*8\M2.5*10\M2.5*12
Flat screw size: M2.5*4\M2.5*6\M2.5*8 \M2.5*10\M2.5*12
Package list:500 * Hex Screw(10*50, 1 Box)
Note:The actual product color may deviate from the photo due to light.
There may be a slight deviation in the measurement of product.

Feature:1. oxidation treatment, beautiful and corrosion resistant.
2. Aluminum alloy material, larger bearing capacity.
3. Suitable for high-speed silent high-accuracy equipment, engineering machinery, transmissions.
4. movement and low friction make it energy efficient.
5. Just need to drip lubricant to lubricate the sliding block.
Specification:
Item Type:Bearing Sliding Block
Material:Aluminum Alloy
Model:SC12UU
Length:40mm / 1.57in
Width:35mm / 1.38in
Height:25mm / 0.98in
Inner Diameter:12mm / 0.47in
Lubricant Agent:Lubricant Oil
Lubricating Method:Drip Lubricant
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:2 x Linear Bearing Sliding Block

Feature:1. The 6mm D‑ provides a flat surface for set screws to contact while leaving the outer untouched.
2. This steel shaft is compatible for / gobilda/ TETRIX/ / FRC/ FIRST/ WRO.
3. Superior stainless steel material, rugged, durable, and with good performance.
4. Even after heavy usage, it will slide through bearings and mating components with ease for practicality.
5. Many drive components have a matching D‑bore, no opportunity of the shaft spinning inside.
Specification:
Condition: 100% Brand New
Item Type: Shaft
Material: Stainless Steel
Color: As Picture Shown
Size: Approx.20 x 0.6cm/7.9x0.2in
Single Weight: Approx. 42.3g/1.49oz
Quantity: 5pcs
Application:
Compatible for
Compatible for Gobilda
Compatible for TETRIX
Compatible for
Compatible for FRC
Compatible for FIRST
Compatible for FLL
Compatible for WRO
Compatible for ServoCity
Compatible for STEAM
Compatible for VEX ROBOT
Compatible for Andymark
Compatible for STEM
Compatible for Pitsco Education
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:5 x Stainless Steel Shafts

Features:
Made of premium carbon steel , strong and durable
Install it into the of the two profiles, and then tighten the screws
Used for straightening between two profiles
Comes with screws, convenient to install
European standard industrial aluminum , with reliable performance
Specification:
Material: carbon steel
Weight: Approx.151g~384g/5.3oz~13.5oz
Detailed size:
Model(Optional) length width thickness screw hole Quantity
2020 100mm 10mm 5mm 6
3030 180mm 15mm 6mm M6 2
4040 180mm 19mm 10mm M6 2
4545 180mm 19mm 11mm M8 2
Package list:
1 set x Aluminum with screws

Features:
100% Brand new and high quality.
These liner-motion bearings are made of high quality bearing steel for low noise and long service life.
They are double sealed to avoid contaminants entering and save lubricant.
Bearings have a 10mm inner diameter, a 19mm outer diameter, and a 29mm height.
These are great for small hobby 10mm shaft/rod projects such as printer, engraving machine.
Specifications:
Type: LM10UU
Material: Bearing steel
Inner Diameter: 10mm / 0.39 inch
Outer Diameter: 19mm / 0.75 inch
Height: 29mm / 1.14 inch
Quantity: 8pcs
Package Includes:
8 x Bearings

Feature:1. Magnet at the brush end makes it easier to remove and insert hearing aid batteries.
2. Multifunctional cleaning tool, very suitable to keep the cleaning of hearing aid.
3. Use the wax loop to gently remove the wax from in‑the‑ear hearing aids. can also be used to adjust the volume of ITC or ITE hearing aids.
4. Wonderful accessory to cleaning wax or debris from the of the hearing aids.
5. Including 20pcs hearing aids cleaning brush of the package, meeting different demands.
Specification:
Condition: 100% Brand New
Item Type: Hearing Aid Cleaning Brush
Material: Plastic Metal
Function:Brush: Brush wax or skin particles from the of a hearing aid or earplug
Wax Loop: Gently remove wax from the ear hearing aid
Magnet: Make it easier to remove and insert hearing aid batteries
Single Brush Size: Approx. 4.8 x 1.2 x 0.4cm / 1.9 x 0.5 x 0.2in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:20 x Brush

AC230V MX OF Shunt Release MX OF-400 Shunt Trip for Building Lighting Commerce
Features:
100% brand new and high quality shunt trip.
Small body and it has great performance while using.
It is made of premium material, durable and has long service life.
Lightweight and compact size, high reliability and easy installation.
The operation is simple and easy to control, making your home electricity become safer.
Specification:Condition: 100% Brand New
Item Type: Shunt Trip
Material: Plastic
Working Voltage: AC230V
Package list:1 * Shunt Trip
1 * Auxiliary Contact

Dustproof Sealed Ball Bearings Deep Ball Bearings Industrial Waterproof Hardware
Features:
Made of high quality bearing steel, wear resistant, anti-impact and durable.
The deep design provides more accurate pathway for the balls.
Double side metal sealed ball bearing, waterproof and dustproof.
The ball bearing can work stably under high speed.
Widely used for machine tool, electronic equipment, pump industry, motor and more.
Specification:
Model: 6203-ZZ
Material: Bearing steel
Quantity: 10pcs
Bore diameter: 17mm/0.67in
Outer diameter: 40mm/1.57in
Thickness: 12mm/0.47in
Weight: 620g (approx.)
Package List:
10 * Ball Bearings

Feature:1. Glass passivated diode chip is more reliable.
2. Excellent force and volume ratio makes the rectifier works more stable.
3. High thermal conductive packing can effectively reduce thermal rising.
4. The forward current is 5mA,forward voltage is 1000V.
5. Applicable to military/aerospace, home appliances, automotive electronics, new energy.
Specification:
Item Type:Rectifier
Model Number: KBPC5010
Package: Resin Package
Forward Current (If): 5 (mA)
Forward Voltage (Vf): 1000V
Peak Reverse Voltage: 1000V
Maximum Surge Current: 400A
Average Rectified Current (Io): 2.5-17.5
Size: 28 x 28mm / 1.1 x 1.1in
Operating Temperature Range: -40~150 ° C
Mounting Type: Welding
Repetitive Peak Reverse Voltage : 1000V
Applications: Power
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:10 x Rectifier

Feature:1. Suitable for instrumentation, electric vehicles, construction machinery, mining and mineral processing, industrial fans, aerospace, etc.
2. Articular bearing is a spherical sliding bearing, its sliding contact is an inner sphere and an outer sphere, the movement can be in any Angle rotation swing.
3. Adopts a variety of special processing methods such as phosphating, blasting, inlaying, spraying and so on.
4. Large load capacity, impact resistance, corrosion resistance, wear resistance, self - aligning, good lubrication.
5. Made of high quality materials, high hardness, long service life.
Specification:
Item Type: Articulated Bearing
Model: SA20T / K
Inner Diameter D: Approx. 20mm / 0.8in
Inner Thickness B: Approx. 25mm / 1in
Outer Thickness C1: Approx. 18mm / 0.7in
Outer Diameter : Approx. 50mm / 2in
Length: Approx. 103mm / 4.1in
Purpose: General
Use Characteristics: Corrosion resistance
Lubricant: No lubrication
Oil Lubrication Method: Oil (oil pan) lubrication
Lubrication Status: Boundary lubrication
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Articulated Bearing

Feature:1. Made of high quality ABS material, not easy to damage and durable in use.
2. This fan features easy installation, reliable quality and stable performance.
3. Double ball bearing ensures long service life, not easy to break and reliable.
4. With sufficient cooling air volume and wind pressure, convenient to use.
5. This cooling fan is suitable for barbecue grill, more practical to use.
Specification:
Condition: 100% Brand New
Item Type: Exhaust Fan
Material: ABS
Type: DC Fan
Motor Power: 72W
Voltage: 12V
Current: 6A
Air Volume: 300CFM
Speeds: 8300RPM (r/min)
Bearing: High-accuracy double ball bearing
Wind Pressure: 20.814 InchH2O
Noise: 84d-BA
Fan Connector: Motherboard 2-pin Connector
Product Size: Approx. 9.9 x 3.4 x 8.8 cm / 3.9 x 1.3 x 3.5 in
Hole Distance: Approx. 10.7cm / 4.2in
Weight: Approx. 233g / 8.2oz
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Exhaust Fan

Features:
These liner-motion bearings are made of high quality bearing steel for low noise and long service life.
They are double sealed to avoid contaminants entering and save lubricant.
Bearings have a 8mm inner diameter, a 15mm outer diameter, and a 45mm length.
These are great for small hobby 8mm shaft/rod projects such as printer, engraving machine.
There comes total 6 pieces bearings which you may use for many different projects.
Specifications:
Type: LM8LUU
Material: Bearing steel
Inner Diameter: 8mm / 0.31"
Outer Diameter: 15mm / 0.59"
Length: 45mm / 1.77"
Quantity: 6pcs
Package Includes:
6 x Bearings

Features:This propeller drill jig is suitable for DLE30/35RA/40/50/55/55RA/60/61, EME35/55/60, DA50/60, DLA32/56/58/64, EVO54/58, 3W50/55, MVVS58, TR-50HP, JC51 engine.
Plated layer can prevent fading or rust to some extent.
Easy and convenient to install and remove.
Made of superior material, which is eco-friendly, and durable.
Fine in workmanship and high in quality.
Specification:Condition: 100% Brand New
Item Type: RC Accessory
Material: Metal
Color: As Shown in the Picture
Diameter: Approx. 45mm / 1.77inch
Weight: Approx. 172g
Package list:1 * Propeller Drill
2 * Drill Bits
1 * Screw
1 * Screw Shim

Low Friction High-Strength Linear Bearing Slide Block Linear Bearing Block For
Feature:1. Suitable for silent high equipment, construction machinery, transmissions.
2. Made of high-strength aluminum alloy material, strong carrying capacity and long service life.
3. oxidation treatment, beautiful and corrosion resistant.
4. movement, low friction, high rigidity and long life.
5. Easy to install and convenient to use.
Specification:
Condition: 100% Brand New
Item Type: Linear Bearing Slide Block
Material: Aluminum Alloy
Model: SBR20UU
Length: Approx. 50mm / 1.97in
Width: Approx. 48mm / 1.89in
Height: Approx. 38mm / 1.5in
Inner Diameter: Approx. 20mm / 0.79in
Lubricant : Oil Lubrication
Oil Lubrication Method: Oil Drip Lubrication
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:2 x Linear Bearing Slide Block

Features:
Made of high quality cemented carbide, this circular is quite durable.
Inner diameter is 1inch and it will fit for many electric saw machines.
40 evenly arranged teeth are very which fast and fluent cutting.
Suitable for cutting wood, brush and shrubs, great for woodworking.
Widely used on most gasoline brush cutting machines, saws, sliding table saws.
Specifications:
Material: Cemented carbide
Teeth: 40T
Outer Diameter: 200mm/8in
Inner Diameter: 25.4mm/1in
Max. : 7000rpm
Package Includes:
1 x
Note: The color of letters imprinted on item is random.

Feature:1. Replaced easily, bridge module keeps simple installation, which not requires particularly complicated operations.
2. Depends on high-quality materials with fine workmanship, bridge board supports higher durability.
3. RF Module keeps guaranteed quality. And its application can be increased by printed circuit board material.
4. Adopts high-quality electronic components, bridge board can be stable and reliable to use.
5. Via strict quality control and quality assurance, bridge module keeps guaranteed quality, you can use it with confidence.
Specification:
Item Type: Bridge board
Working Frequency: 0.1-3000MHz
Return Loss: Larger than 35dB
Connector: SMA
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Bridge Board

Feature:1. Suitable for silent high equipment, construction machinery, transmissions.
2. Made of high-strength aluminum alloy material, strong carrying capacity and long service life.
3. oxidation treatment, beautiful and corrosion resistant.
4. movement, low friction, high rigidity and long life.
5. Easy to install and convenient to use.
Specification:
Condition: 100% Brand New
Item Type: Linear Bearing Slide Block
Material: Aluminum Alloy
Model: SBR25UU
Length: Approx. 65mm / 2.6in
Width: Approx. 60mm / 2.4in
Height: Approx. 46mm / 1.8in
Inner Diameter: Approx. 25mm / 1in
Lubricant : Oil Lubrication
Oil Lubrication Method: Oil Drip Lubrication
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Linear Bearing Slide Block

Protector Integrated In The Motor JD-5 Protector Integrated In The Motor
Feature:1. The motor protector can timely disconnect the switch electrical contacts and the 3 phase power of the motor when the main circuit of the motor occurs abnormal operation state such as phase loss, overload and stall, so as to reliably protect the motor.
2. This motor protector is simple in structure, reliable in action, easy to use and in line with the standard GB14048.4.
3. The protector features high protection accuracy, reasonable structure, complete functions.
4. With protection functions for symmetrical faults (such as overload, stall, etc) and asymmetrical faults (such as phase loss).
5. The protector adopts current detection technology and relay output interface.
Specification:
Item Type: Motor Integrated Protector
Model: JD-5
Operating Voltage: AC380V 50/60hz
Operating Current: 100A
Applicable Motor Power: 50kW
Enclosure Protection Class: IP40
Trip Level: 10A
Protection: Overload, Stall, Phase Loss
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Motor Integrated Protector

Features:
1. 100% brand new and high quality.
2. Made of aluminum alloy material, wear resistant and anti-corrosion.
3. Precision threads the fastness of the connection.
4. Simple structure, easy to mount and maintain.
5. Compact size, large air ventilation.
Specification:
Model: CV-25HS
Nozzle diameter: 2.5mm
Vacuum thread diameter: Rp3/8
Inlet thread diameter: Rp1/4
Outlet thread diameter: Rp1/2
Flow medium: air
Working pressure: 1~6BAR
Rated pressure: 5bar
Suction flow rate: 160L/min
Air consumption: 265L/min
Vacuum pressure: -92bar
Working temperature: 0~60 ℃
Material: Aluminum alloy
Color: Silver
Package Weight: Approx. 230g/8.1oz
Package List:
1 x Vacuum Generator
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Feature:1. Made of high quality material, it is sturdy and durable for long time use.
2. 3 in 1 function, it can wrap, strip and unwrap the wire, practical to use.
3. This wire wrap hand tool with high reliability is easy to use and easy to save.
4. Compact in size, light in weight, convenient to use and has long service life.
5. Wire wrapping tool is ideal for tool kit in all service and repair applications.
Specification:
Condition: 100% Brand New
Item Type: Wire Wrap Tool
Material: Metal
Function: Wrap Strip Unwrap 3 in 1 Function
Model: WSU-30M
.w-e-text table td, .w-e-text table th{border: .5pt solid #000;};.w-e-text table{border: 1px solid #000 !important;}.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Wire Wrap Tool

Feature:1. To measure the patient's hearing and vibration sensitivity to nerve damage.
2. Can be used in physics experiments also can be used for teaching.
3. Made of quality aluminum alloy material, durable and sturdy, non-deformation.
4. Come with storage bag, easy and convenient to store the tuning fork.
5. Including 3pcs tuning fork of the package, meeting your different demands.
Specification:
Condition: 100% Brand New
Item Type: Tuning Fork
Material: Aluminum Alloy
C4096/C4160/C4225 Tuning Fork Size: Approx. 11.2 x 2.6cm / 4.4 x 1in.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x C4096 Tuning Fork
1 x C4160 Tuning Fork
1 x C4225 Tuning Fork
1 x Storage Bag

Full ceramic bearing with diamagnetic electrically insulating, wear resistance and corrosion resistance, not self lubricating, high temperature resistance, cold and other characteristics, can be used in extremely harsh environment and special conditions.
Features:
This ball bearing is made of high quality ceramic ZrO2 and PTFE material, features high , high speed, and wear small.
Small frictional resistance, low power consumption, high mechanical efficiency.
This is a sealed ball bearing, with good dustproof effect.
With the characteristic of high stability, high reliability.
Standardization size, used for machinery manufacturing, equipment installation and maintenance.
Specifications:Material: PTFE, Ceramic ZrO2
Model: 6001-2RS
Sealed dustproof form: 2RS
Inner diameter: 12mm / 0.5inch
Outside diameter: 28 mm / 1.1inch
Thickness: 8mm / 0.3inch
Quantity: 2pcs
Color: White
Rolling column number: Single
Raceway type: Deep raceway
Weight: Approx. 38g
Package Included:2 x ZrO2 Ball Bearing

Features:
RSK2001 is designed for Stamford generator of UC series. 1 ~ 50 kw generator using 25A current.
It can effectively help the generator to adjust the current to the standard level.
With excellent rectification function, stable performance.
Professional manufacturing, exquisite workmanship, high reliability.
Suitable for brushless generator excitation rectifier, diode ZX25A-12P and ZX25A-12R, current 25A, withstand voltage 1200V.
Specification:Condition: 100% brand new
Model: RSK2001
Package List:1 * Rectifier
1 * Varistor

Feature:1. To measure the patient's hearing and vibration sensitivity to nerve damage.
2. Can be used in physics experiments also can be used for teaching.
3. Made of quality aluminum alloy material, durable and sturdy, non-deformation.
4. Come with storage bag, easy and convenient to store the tuning fork.
5. Including 3pcs tuning fork of the package, meeting your different demands.
Specification:
Condition: 100% Brand New
Item Type: Tuning Fork
Material: Aluminum Alloy Wood
C4096/C4160/C4225 Tuning Fork Size: Approx. 11.2 x 2.6cm / 4.4 x 1in
Hammer Size: Approx. 14 x 2cm / 5.5 x 0.8in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x C4096 Tuning Fork
1 x C4160 Tuning Fork
1 x C4225 Tuning Fork
2 x Storage Bag
1 x Hammer

Features:
1. 100% brand new and high quality
2. Made of bearing steel material, durable to use.
3. Simple structure with stable performance, easy to use
4. It can be used on joints that can withstand radial loads or combined loads of radial and axial forces. It can also be used on parts that can withstand axial loads, such as small power motors, automobile and tractor gearboxes, machine tool gearboxes, General machines, tools, etc.
5. Can be used in gearboxes, instrumentation, motors, household appliances, internal combustion engines, transportation vehicles, agricultural machinery, construction machinery, construction machinery, roller skates, yo-yo, etc.
Specification:
Condition: 100% Brand New
Material: Bearing Steel
Weight: Approx. 65g / 2.3oz
Outer Diameter: Approx. 40mm / 1.6in
Inner Diameter: Approx. 17mm / 0.7in
Package List:
10Pcs Deep Ball Bearings

Feature:1. High sensitivity, fast breaking and anti‑breakdown, practical to use.
2. Premium plastic material, high temperature resistant and flame retardant, good insulation performance.
3. Adopt for HSDQ SCR chip, it features stable and professional performance.
4. 4‑32V DC input current and 30‑480V AC control voltage, reliable in use.
5. Conform to strict quality control standards, which is dependable.
Specification:
Condition: 100% Brand New
Item Type: Solid State Relay
Material: Plastic
Color: As picture shown
Brand: BEM
Input Current: 4-32V DC
Control Voltage: 30-480V AC
Optional Type: H180Z, H1100Z, H1120Z, H1150Z, H1200Z
H1200Z110V220V380V
Resistive
Load11KW22KW38KW
Inductive
Load3.66KW7.32KW12.6KW
Capacitive
Load2.2KW4.4KW7.6KW
Maximum Load200A
Weight (Approx.) 0.155KG/0.3lb
H1120Z110V220V380V
Resistive
Load6.6KW13.2KW22.8KW
Inductive
Load2.2KW4.4KW7.6KW
Capacitive
Load1.32KW5.5KW4.56KW
Maximum Load120A
Weight (Approx.)0.157KG/0.3lb
H180Z110V220V380V
Resistive
Load4.4KW8.8KW15.2KW
Inductive
Load1.46KW2.93KW5KW
Capacitive
Load0.88KW1.76KW3KW
Maximum Load80A
Weight (Approx.)0.155KG/0.3lb
H1100Z110V220V380V
Resistive
Load5.5KW11KW19KW
Inductive
Load1.8KW3.6KW6.3KW
Capacitive
Load1.1KW2.2KW3.8KW
Maximum Load100A
Weight (Approx.)0.155KG/0.3lb
H1150Z110V220V380V
Resistive
Load8.25KW16.5KW28.5KW
Inductive
Load2.75KW5.5KW9.5KW
Capacitive
Load1.65KW3.3KW5.7KW
Maximum Load150A
Weight (Approx.)0.158KG/0.3lb
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Solid State Relay
1 Set of Connecting Cables

Features:
Module characteristics:
1. Using ±5V typical power supply @±5
2. The technique of using a guard (Guard ) in a low bias current amplifier - lower leakage.
3. Because the small current is a big influence of noise, this module is divided into 4 files, limiting the bandwidth to suppress the noise
4. The internal input current is divided by a 4-position toggle switch for different current applications
5.The small current is susceptible to various interferences, increase the shielding shell to suppress interference
6. When inputting a small current, pay attention to the power supply must use a low noise power supply to prevent power supply noise from interfering with the input signal.
Chip introduction
1,B Grade Is 100% Tested for Noise
30 nV/ Hz Max at f = 10 Hz
12 nV/ Hz Max at f = 1 kHz
2, Low Input Offset Voltage . . . 500 ÎĽV Max
3,Excellent Offset Voltage Stability With Temperature . . . 0.5 μV/°C Typ
4, Rail-to-Rail Output Swing
Specification:
Model:TLC2201
Gear:pA nA uA (Optional)
Package list:
1 xTLC2201 Module

Features:
1. 100% brand new and high quality
2. The is of oxidation treatment, corrosion resistant
3. Made of aluminum alloy material, bearing capacity
4. The design can prevent dust from entering and extend service life
5. Suitable for high-speed silent high-precision equipment
Specification:
Condition: 100% Brand New
Model: scs25uu
Uses: Transmission
Lubricant : Oil Lubrication
Oil Lubrication Method: Drip Lubrication
Weight: Approx. 557g / 19.6oz
Height: Approx. 51.5mm / 2.0in
Inner Diameter: Approx. 25mm / 1.0in
Package List:
1 * Slide Block

Roller Bearing Inner Components Ball Bearings Motors for Papermaking Machinery
Feature:1. High‑speed rotation rotates with minimal frictional resistance, so as to obtain high‑accuracy smoothly motion.
2. Widely used in machine tools, papermaking machinery, mechanical gears, motors, wind generators, steel equipment, mining equipment, etc.
3. The outer and inner components (inner , roller and cage components) can be separated for easy assembly and disassembly.
4. With great workmanship, this bearing can perfect replacement for the old one.
5. Made of high‑quality steel materials, strong and durable, has a long service life.
Specification:
Item Type: Tapered Roller Bearings
Product Material: Steel
Model: 32014（2007114E）
Raceway Type: Tapered raceway
Number of Rolling Body Columns: Single column
Rolling Part: Tapered roller
Main Applicable Cage: J steel plate stamping cage
Inner Diameter: Approx. 70mm / 2.8in
Outer Diameter: Approx. 110mm / 4.3in
Instructions for Use:
1. The bearing is a separate type, the user can adjust the clearance according to the needs when installing
2. The bearing should be cleaned with gasoline or kerosene before use and kept well lubricated
3. When the bearing is installed, the bearing should be pressed into the component and beating is strictly prohibited
4. The bearing storage place should be cleanly and ventilated to avoid moisture. Bearings that need long‑term storage should be regularly rust‑proof
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Tapered Roller Bearing

2 Pcs/Set Tapered Roller Bearing Set Ball Bearings For Agricultural Machinery
Feature:1. Widely used in machine tools, papermaking machinery, mechanical gears, motors, wind generators, steel equipment, mining equipment, etc.
2. The outer and inner components (inner , roller and cage components) can be separated for easy assembly and disassembly.
3. This product is mainly suitable for J steel plate stamping cage, very strong and durable.
4. With great workmanship, this bearing can perfect replacement for the old one.
5. Using high‑quality materials, strong and durable, has a long service life.
Specification:
Item Type: Tapered Roller Bearing Set
Product Material: Steel
Model: 32010 (2007110E)
Raceway Type: Tapered raceway
Number of Rolling Body Columns: Single column
Rolling Part: Tapered roller
Inner Diameter: Approx. 50mm / 2in
Outer Diameter: Approx. 80mm / 3.1in
Instructions for Use:
1. The bearing is a separate type, the user can adjust the clearance according to the needs when installing
2. The bearing should be cleaned with gasoline or kerosene before use and kept well lubricated
3. When the bearing is installed, the bearing should be pressed into the component and beating is strictly prohibited
4. The bearing storage place should be cleanly and ventilated to avoid moisture. Bearings that need long-term storage should be regularly rust-proof
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:2 x Bearings

Tapered Roller Bearing Replacement Anti‑Corrsion Steel Tapered Roller Bearing
Feature:1. The outer and inner components (inner and roller and cage components) can be separated, convenient for assembly and disassembly.
2. It runs at high speed and rotates with minimal frictional resistance, so as to obtain high‑ accuracy motion.
3. High quality bearing steel material, rugged, anti‑corrsion and durable, not easy to damage, ensures long lifespan.
4. Professional and precise designs to insure a perfect fit and correct operation, it has stable performance.
5. Widely used in machine tools, papermaking machinery, mechanical gears, motors, wind generators, steel equipment, mining equipment, injection molding machines, textile machines, doors and window, roller shoes, toys, etc.
Specification:
Condition: 100% Brand New
Item Type: Tapered Roller Bearing
Material: Bearing Steel
Color: As picture shown
Model: 32203 7503E
Raceway Type: Tapered Raceway
Number of Rolling Body Columns: Single Column
Rolling : Tapered Roller
Main Applicable Cage: J Steel Plate Stamping Cage
Inner Diameter: Approx. 17mm/0.7in
Outer Diameter: Approx. 40mm/1.6in
Instructions for Use:1. The bearing is a separate type, the user can adjust the clearance according to the needs when installing
2. The bearing should be cleaned with gasoline or kerosene before use and kept well lubricated
3. When the bearing is installed, the bearing should be pressed into the component and beating is strictly prohibited
4. The bearing storage place should be clean and ventilated to avoid moisture. Bearings that need long-term storage should be regularly rust-proof.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:5 x Tapered Roller Bearings

Feature:1. Made of high‑quality stainless steel, durable industrial bracket is easy to use in the practical life.
2. Due to adjustable length, adjustable flexible shelf can be suitable for various lengths of whetstone.
3. Built to strict quality control standards, such bracket is improved for high practical adoptability.
4. Not easy to damage so that you can use for a long time and metal stand can be used for whetstone.
5. With long service life, light and practical metal stand's quality is guaranteed, you can use it with confidence.
Specification:
Item Type: Metal stand
Material: Stainless steel
Uses: Whetstone bracket
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Metal Stand

Smoothly Motion Roller Bearing Tapered Bearings for Machine Tools Wind Turbine
Feature:1. High‑speed rotation with minimal frictional resistance, so as to obtain high‑precision smoothly motion
2. Widely used in machine tools, mechanical gears, motors, wind turbines, mining equipment, injection molding machines, textile machines, roller shoes, toys, etc.
3. The outer and inner components (inner , roller and cage components) can be separated for easy assembly and disassembly
4. The bearing is a separate type, the user can adjust the clearance according to the needs when installing.
5. The bearing should be cleaned with gasoline or kerosene before use and kept well lubricated.
Specification:
Item Type: Tapered Roller Bearings
Product Material: Steel
Model: 32013（2007113）
Raceway Type: Tapered raceway
Number of Rolling Body Columns: Single column
Rolling Part: Tapered roller
Main Applicable Cage: J steel plate stamping cage
Inner Diameter: Approx. 65mm / 2.6in
Outer Diameter: Approx. 100mm / 3.9in
Instructions for Use:
1. The bearing is a separate type, the user can adjust the clearance according to the needs when installing
2. The bearing should be cleaned with gasoline or kerosene before use and kept well lubricated
3. When the bearing is installed, the bearing should be pressed into the component and beating is strictly prohibited
4. The bearing storage place should be cleanly and ventilated to avoid moisture. Bearings that need long‑term storage should be regularly rust‑proof
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Tapered Roller Bearing

Silicon Rectifier Bridge Bridge Rectification Module In Low Epoxy Box 200A 1600V
Feature:1. The chip is electrically insulated from the backplane of 2500V AC voltage.
2. crimping structure, excellent temperature characteristics and power cycling capability.
3. Small size and light weight,easy to carry and portable.
4. The reverse repeat peak voltage is from 600 to 1600V.
5. Applicable to military/aerospace, home appliances, automotive electronics, new energy.
Specification:
Item Type:Rectifier
Model: MDS200A 1600V
Package: Resin Package
Installation Type: Welding
DC Output Current: 200A
Reverse Repeat Peak Voltage: 600-1600V
Reverse Repeat Peak Current: 15mA
Positive Non-Repetitive Surge Current: 2.1KA
Threshold Voltage: 0.8V
Slope Resistance: 2.8mΩ
Forward Peak Voltage: 1.35V
Insulation Voltage: 2500V
Installation Torsion (M5): 4N·M
Installation Torsion (M6): 6N·M
Storage Temperature: -40~125°C
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Rectifier

Features:
The part can install the button accurately and quickly.
The part is fit for MB-373,very practical.
It is made of premium material,durable and has long service life.
It is stable and has great performance while using.
Delicate and practical, high hardness, firm and strong.
Specification:
Material:Iron
Type:Vertical/Flat(Optional)
Package List:1*373 Button Assembly

Features:
1. 100% brand new and high quality.
2. Light weight, small size and great performance.
3. The product adopts the method of rolling to reduce the friction during power transmission and improve the transmission efficiency of mechanical power.
4. Deep raceway with single column ball bearing the efficient operation of steel balls.
5. Mainly used in the light industry.
Specification:
Condition: 100% Brand New
Model: 6005-2RS
Cage Materials: Steel Plate
Use Characteristics: High Speed
Uses: General
Number of Rolling Body Columns: Single Column
Raceway Type: Deep Raceway
Bearing Material: Bearing Steel
Rolling Body Type: Ball
Rolling Body: Steel Ball
Weight: Approx. 780g / 27.5oz
Inner Diameter: Approx. 25mm / 1.0in
Outer Diameter: Approx. 47mm / 1.9in
Thickness: Approx. 12mm / 0.5in
Package List:
10Pcs Ball Bearings

Feature:1. Premium plastic material, high temperature resistant and flame retardant, good insulation performance.
2. High sensitivity, fast breaking and anti‑breakdown, safe and dependable.
3. Adopt for HSDQ SCR chip, it features stable and professional performance.
4. 4‑32V DC input current and 30‑480V AC control voltage, reliable in use.
5. Built to meet standard specification, strictly follow factory quality control.
Specification:
Condition: 100% Brand New
Item Type: Solid State Relay
Material: Plastic
Color: As picture shown
Brand: BEM
Input Current: 4-32V DC
Control Voltage: 30-480V AC
Optional Type: H2150Z, H2180Z, H2200Z, H2250Z, H2300Z
H2300Z110V220V380V
Resistive
Load16.5KW33KW57KW
Inductive
Load5.5KW11KW19KW
Capacitive
Load3.3KW6.6KW11.4KW
Maximum Load300A
Weight (Approx.)0.239KG/0.5lb
H2200Z110V220V380V
Resistive
Load11KW22KW38KW
Inductive
Load3.66KW7.32KW12.6KW
Capacitive
Load2.2KW4.4KW7.6KW
Maximum Load200A
Weight (Approx.)0.232KG/0.5lb
H2250Z110V220V380V
Resistive
Load13.7KW27.5KW47.5KW
Inductive
Load4.57KW9.15KW15.8KW
Capacitive
Load2.75KW5.5KW9.5KW
Maximum Load250A
Weight (Approx.) 0.231KG/0.5lb
H2150Z110V220V380V
Resistive
Load8.25KW16.5KW28.5KW
Inductive
Load2.75KW5.5KW9.5KW
Capacitive
Load1.65KW3.3KW5.7KW
Maximum Load150A
Weight (Approx.) 0.236KG/0.5lb
H2180Z110V220V380V
Resistive
Load9.9KW19.8KW34.2KW
Inductive
Load3.3KW6.6KW11.4KW
Capacitive
Load1.98KW3.96KW6.84KW
Maximum Load180A
Weight (Approx.)0.230KG/0.5lb
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Solid State Relay
2 x Connecting Cables

Tapered Roller Bearing Ball Bearings Replacement Part For Agricultural Machinery
Feature:1. Can used in machine tools, papermaking machinery, mechanical gears, motors, wind generators, steel equipment, mining equipment, etc.
2. The outer and inner components (inner , roller and cage components) can be separated for easy assembly and disassembly.
3. High‑speed rotation with minimal frictional resistance, so as to obtain high‑accuracy smoothly motion.
4. Strict quality control and quality assurance, high safety factor, can be used with peace of mind.
5. The bearing is a separate type, the user can adjust the clearance according to the needs when installing.
Specification:
Item Type: Tapered Roller Bearing
Product Material: Steel
Model: 32308 7608
Raceway Type: Tapered raceway
Number of Rolling Body Columns: Single column
Rolling Parts: Tapered Roller
Main Applicable Cage: J steel plate stamping cage
Inner Diameter: Approx. 40mm / 1.6in
Outer Diameter: Approx. 90mm / 3.5in
Instructions for Use:
1. The bearing is a separate type, the user can adjust the clearance according to the needs when installing
2. The bearing should be cleaned with gasoline or kerosene before use and kept well lubricated
3. When the bearing is installed, the bearing should be pressed into the component and beating is strictly prohibited
4. The bearing storage place should be cleanly and ventilated to avoid moisture. Bearings that need long-term storage should be regularly rust-proof
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Bearing

No Spark Overload Protection 3-phase Solid State Relay Resistant To Corrosive
Features:
No spark and noise, quick response.
Long service life and high reliability.
Resistant to corrosive, humid, dusty and other harsh environment.
The solid-state relay has the functions of short-circuit protection, overload protection and overheating protection.
Widely used in computer peripheral interface equipment, heating furnace thermostatic equipment, CNC machinery, industrial automation equipment.
Specification:Model: TSR-25AA-H
Weight: Approx.343g/ 12.1oz
Rated current: 25A
Control voltage: 90- 250VAC
Load voltage: 24- 480VAC
Control current: ≥1OMA
Dielectric: 2000VAC
State voltage drop: ≤5MA
Turn-on time: ≤10MS
Environment temperature: -30℃ ~ 70℃
Package List:1 * Three-phase Solid State Relay
Note:Please allow slight error due to manual measurement. Thanks for your understanding.

Features:Adopting high quality plastic material, which is durable for long term use.
With precise and unique design, this capsule filler is easy to operate and effective to reduce wasting.
Higher accuracy, less powder leakage.
Imitate automatic mechanical arrangement, you can arrange capsule cap and capsule body quickly, more convenient to use and improve capsule filling efficiency.
Effective to deal with the problem of filling capsule, like small batch processing, production, self-made capsules.
Specification:Condition: 100% Brand New
Item Type: Capsule Filler
Material: Plastic
Color: Blue
Holes Quantity: 100
Optional Suitable for Capsule Type: 000#, 00#, 0#, 1#
Weight: Approx. 834-850g/ 29.4-30oz
Package list:1 x Alignment Plate
1 x Body Plate
1 x Middle Plate
1 x Cap Plate
1 x Powder Pressing Plate
1 x Powder Block Plate
1 x Powder Pressing Plate Handle
1 Spreader

2 Pcs/Set Tapered Roller Bearing Set Ball Bearings For Agricultural Machinery
Feature:1. Widely used in machine tools, papermaking machinery, mechanical gears, motors, wind generators, steel equipment, mining equipment, etc.
2. The outer and inner components (inner , roller and cage components) can be separated for easy assembly and disassembly.
3. With high‑speed rotation with minimal frictional resistance, so as to obtain high‑accuracy smoothly motion.
4. Convenient to use and with good performance, with small size, easy to carry and store.
5. Great workmanship, this bearing can perfect replacement for the old one
Specification:
Item Type: Tapered Roller Bearing Set
Product Material: Steel
Model: 32011 2007111
Raceway Type: Tapered raceway
Number of Rolling Body Columns: Single column
Rolling Part: Tapered roller
Main Applicable Cage: J steel plate stamping cage
Inner Diameter: Approx. 55mm / 2.2in
Outer Diameter: Approx. 90mm / 3.5in
Instructions for Use:
1. The bearing is a separate type, the user can adjust the clearance according to the needs when installing
2. The bearing should be cleaned with gasoline or kerosene before use and kept well lubricated
3. When the bearing is installed, the bearing should be pressed into the component and beating is strictly prohibited
4. The bearing storage place should be cleanly and ventilated to avoid moisture. Bearings that need long‑term storage should be regularly rust‑proof
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:2 x Bearing

Features:
Treated with oxidation on the , it is beautiful and corrosion- resistant
It is made of aluminum alloy material, with bearing capacity
This slide bushing helps prevent dust from entering and extends the service life
Suitable for high speed mute high equipment
Smooth moving, low friction, high rigidity and long life.
Specification:
Model: SCS25LUU
Height: 51.5 (mm)
Inner diameter: 25 (mm)
Purpose: transmission device
Lubricant: oil lubrication
Oil lubrication method: drip lubrication
Weight: Approx.1080g/38.1oz
Package list:
1 x Slide Block

Tapered Roller Bearing Replacement For Agricultural Machinery Textile Machines
Feature:1. The outer and inner components (inner and roller and cage components) can be separated, which is convenient for assembly and disassembly.
2. It runs at high speed and rotates with minimal frictional resistance, so as to obtain high‑ accuracy motion.
3. Made of high quality steel material, rugged, anti‑corrsion and durable, not easy to damage, ensures long lifespan.
4. Professional and precise designs to insure a perfect fit and correct operation, it has stable performance.
5. Widely used in machine tools, papermaking machinery, mechanical gears, motors, wind generators, steel equipment, mining equipment, injection molding machines, textile machines, doors and window, roller shoes, toys, etc.
Specification:
Condition: 100% Brand New
Item Type: Tapered Roller Bearings
Material: Steel
Color: As picture shown
Model: 32012 2007112E
Raceway Type: Tapered Raceway
Number Of Rolling Elements Columns: Single Column
Rolling Elements: Tapered Roller
Main Applicable Cage: J Steel Plate Stamping Cage
Inner Diameter: Approx. 60mm/2.4in
Outer Diameter: Approx. 95mm/3.7in
Instructions for Use:1. The bearing is a separate type, the user can adjust the clearance according to the needs when installing
2. The bearing should be cleaned with gasoline or kerosene before use and kept well lubricated
3. When the bearing is installed, the bearing should be pressed into the component and beating is strictly prohibited
4. The bearing storage place should be clean and ventilated to avoid moisture. Bearings that need long-term storage should be regularly rust-proof.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:2 x Tapered Roller Bearings

Features:
1. 100% brand new and high quality
2. Made of bearing steel material, durable to use.
3. Simple structure with stable performance, easy to use
4. Low frictional resistance and high speed
5. Can be used in gearboxes, instrumentation, motors, household appliances, internal combustion engines, transportation vehicles, agricultural machinery, construction machinery, construction machinery, roller skates, yo-yo, etc.
Specification:
Condition: 100% Brand New
Model: 6304-ZZ
Cage Materials: Steel Plate
Bearing Material: Bearing Steel
Use Characteristics: High Speed
Using: General
Number of Rolling Body Columns: Single Column
Raceway Type: Deep Raceway
Rolling Body Type: Ball
Angle: 15 Degrees
Sealing Cap: Double-Side
Rolling Body: Steel Ball
Inner Diameter: Approx. 20mm / 0.8in
Outer Diameter: Approx. 52mm / 2.0in
Thickness: Approx. 15mm / 0.6in
Package List:
10Pcs Deep Ball Bearings

2 Pcs/Set Tapered Roller Bearing 32210 7510E Wheel Bearings Replacement For
Feature:1. Easy to assemble and disassemble, as the outer and inner components (inner and roller and cage components) can be separated.
2. Runs at high speed and rotates with minimal frictional resistance, conducive to obtaining high‑precision motion.
3. High quality bearing steel material, rugged, anti‑corrsion and durable, not easy to damage, ensures long lifespan.
4. Professional and precise designs to insure a perfect fit and correct operation, it has stable performance.
5. Widely used in machine tools, papermaking machinery, mechanical gears, motors, wind generators, steel equipment, mining equipment, injection molding machines, textile machines, doors and window, roller shoes, toys, etc.
Specification:
Condition: 100% Brand New
Item Type: Tapered Roller Bearing
Material: Bearing Steel
Color: As picture shown
Model: 32210 7510E
Raceway Type: Tapered Raceway
Number of Rolling Body Columns: Single Column
Rolling Elements: Tapered Roller
Main Applicable Cage: J Steel Plate Stamping Cage
Inner Diameter: Approx. 50mm/2in
Outer Diameter: Approx. 90mm/3.5in
Instructions for Use:1. The bearing is a separate type, the user can adjust the clearance according to the needs when installing
2. The bearing should be cleaned with gasoline or kerosene before use and kept well lubricated
3. When the bearing is installed, the bearing should be pressed into the component and beating is strictly prohibited
4. The bearing storage place should be clean and ventilated to avoid moisture. Bearings that need long-term storage should be regularly rust-proof.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:2 x Tapered Roller Bearings