Elektronikus alkatrészek és félvezetők

High-power LED 10W
Long lifetime
Light Colour: Warm White
color: 3000k-3200k warm white
voltage: 9-12V DC
Current: 1000 mA
Luminous flux: 800LM
Size: 29 x 20 x 3 mm
Package: 5 x LED light
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.The measurement allowed error is /-1-3 cm.

High-power LED 10W
Long lifetime
Light Colour: Warm White
color: 3000k-3200k warm white
voltage: 9-12V DC
Current: 1000 mA
Luminous flux: 800LM
Size: 29 x 20 x 3 mm
Package: 5 x LED light
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.The measurement allowed error is /-1-3 cm.

High-power LED 10W
Long lifetime
Light Colour: Warm White
color: 3000k-3200k warm white
voltage: 9-12V DC
Current: 1000 mA
Luminous flux: 800LM
Size: 29 x 20 x 3 mm
Package: 5 x LED light
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.The measurement allowed error is /-1-3 cm.

Brand new and high quality!
Energy-saving, highly efficient and durable.
For DIY mining lamp, street lamp, underbody light, wall lamp, spotlights etc..
This LED chip is the best choice.
Do not pass!
Light color: white
color temperature: 6500K
Angle: 120°
Operating Voltage: DC 32-34V
Operating Current: 350 mA
Power: 10W
Luminous flux: 750LM
Size: 29 x 20 mm
Note: This product contains positive and negative poles.
When the power of the lamp please use the same cooling system.
The pin, which is located 4 mm from the colloid whose soldering temperature can reach 260 degrees within 3 seconds, while the welding is done.
package content: 5 x LED chips With Blister
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.The measurement allowed error is /-1-3 cm.

Product name: Aluminum resistor;
Resistance Value: 10 Ohm;
Rated power: 10 W
Resistance Tolerance: /- 5% (J);
mounted Hole diameter: 0.2 cm
Body Size: 1.9 x 1 cm (L * D);
Total size: 3.2 x 2.1 x 1 cm (L * W * H)
Casing material: Aluminum
Color: Gold
Weight: 5 g;
Package Contents: 1 x Aluminum Wire Wound Resistor
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

High-power LED 10W
Long lifetime
Light Colour: Warm White
color: 3000k-3200k warm white
voltage: 9-12V DC
Current: 1000 mA
Luminous flux: 800LM
Size: 29 x 20 x 3 mm
Package: 5 x LED light
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.The measurement allowed error is /-1-3 cm.

High-power LED 10W
Long lifetime
Light Colour: Warm White
color: 3000k-3200k warm white
voltage: 9-12V DC
Current: 1000 mA
Luminous flux: 800LM
Size: 29 x 20 x 3 mm
Package: 5 x LED light
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.The measurement allowed error is /-1-3 cm.

3X(Standard General Purpose Aluminum electrolytic capacitor with radial lead The longer lead is positive electrode and the shorter one is negative electrode Widely used in electronics, such as computer motherboard, TV, speaker, digital camera, etc.
UPC 191466574423 EAN 191466574423 ISBN 191466574423 MPN Does not apply Brand Unbranded

Brand new and high quality
Low consumption and super bright
It is recommended to use heat sink.
Applied to: miner's lamp, floor lamps, underground lamps, lawn lamps, underwater lights and interior lighting, chandeliers, recessed lights, spotlights, wall lighting, flat luminescent panels, lamps and other lighting fixtures
Type: Light Chip
Material: Silicone metal
Color of Light: Warm White
Color temperature (K): 3000-3500
Power (W): 10
Voltage (V): DC 9-12
Current: 1050 mA
Luminous Flux (lm): 900
Dimension (mm): 20mm x 14mm
Package included:4 X Light Chip
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Product Name : Electrolytic Capacitor;Type : Radial Lead;Features : Standard General Purpose
Maximum Temperature : 105？°C;Withstand Voltage : 10V;Capacitance : 1000uF
Capacitance Tolerance : ？ /-20% ;Body Size : 8 x 11mm / 0.31'' x 0.43'' (D*L);Lead Spacin
Feature: 1000uF Capacitance, 10V Withstand Voltage, 105C Maximum Temperature, 20% Capacitance Tolerance, Aluminum Electrolytic Capacitors.
Polarized design: the longer lead is positive electrode and the shorter one is negative electrode.
Widely used in elec
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

2X(Product Name : Aluminum Electrolytic Capacitor;Type : Radial Lead;Maximum Temperature : 105？°C
Voltage : 16V;Capacitance : 470uF;Capacitance Tolerance : ？ /-20%
Body Size : 8 x 12mm/0.3'' x 0.47'' (D*L);Lead Spacing : 3mm/0.12'';Lead Length : 26mm/1'', 21
Features: Standard General Purpose.
Aluminum electrolytic capacitor with radial lead.
The longer lead is positive electrode and the shorter one is negative electrode.
Widely used in electronics, such as computer motherboard, TV, speaker, digital camera, e
material: metal
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.)

2X(Product Name : Aluminum Electrolytic Capacitor;Type : Radial Lead;Maximum Temperature : 105？°C
Voltage : 16V;Capacitance : 470uF;Capacitance Tolerance : ？ /-20%
Body Size : 8 x 12mm/0.3'' x 0.47'' (D*L);Lead Spacing : 3mm/0.12'';Lead Length : 26mm/1'', 21
Features: Standard General Purpose.
Aluminum electrolytic capacitor with radial lead.
The longer lead is positive electrode and the shorter one is negative electrode.
Widely used in electronics, such as computer motherboard, TV, speaker, digital camera, e
material: metal
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.)

3X(20 x 1/2W Watt 3.3K ohm 3K3 Carbon Film Resistor 0.5W.
Features: 3.3K ohm Resistance, 1/2W Rating Power, 350V Withstand Voltage, /-5% Resistance Tolerance, Carbon Film Resistors;
Special carbon film resistors are used in applications requiring high pulse stability;
The carbon film resistor with wire leads for through-hole mounting.
UPC 4894462062968 EAN 4894462062968 IABN 4894462062968 MPN Does not apply Brand Unbranded

Premium class type low impedance electrolytic capacitors
Fit for computer motherboard and audio devices
Appearance: Radial Lead
Rated voltage: 400V
Rated capacity: 10uF
Operating temperature: from -40 to 105 Celsius
Size (D x L): approx. 0.4 x 0.67 inch/ 1 x 1.7cm (down-do not include)
Screen size: Approx. 0.16 inch/ 0.4 cm
Package Contents: 10 x low-resistance capacitor
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm. MPN Does not apply Brand Unbranded UPC 4894462158487 EAN 4894462158487 ISBN 4894462158487

Product Name : Aluminum Electrolytic Capacitor;Type : Radial Lead;Maximum Temperature : 105 Celsius
Voltage : 50V;Capacitance : 470uF;Capacitance Tolerance : 20%
Size : 10 x 20mm / 0.39" x 0.78" (D*L);Lead Spacing : 5mm;Lead Length : 22mm, 26mm
External Material : Aluminum;Weight : 20g
Features:Standard General Purpose. Aluminum electrolytic capacitor with radial lead.
Polarized, the longer lead is positive electrode while the shorter one is negative electrode.
Widely used in electronics, such as computer motherboard, TV, speaker, digital camera, etc.
Package Content : 10 x Electrolytic Capacitors
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

This is another great IIC/I2C/TWI/SPI Serial Interface. As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after，connected with a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display via only 2 wires. If you already has I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for Arduino based project.
I2C Address: 0X20~0X27 (the original address is 0X20,you can change it yourself)
Supply voltage: 5V
the backlight and contrast is adjusted by potentiometer
Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
I2C Address: 0x27 (I2C Address: 0X20~0X27 (the original address is 0X27,you can change it yourself)
Compatible for 1602 LCD
Weight:5g
Size:5.5x2.3x1.4cm
Material: PCB
Package Contents:1x IIC/I2C/TWI/SPI Serial Interface Module Port
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Product Name : Light Emitting Diodes
Emitting Light Color : Red, Green, Yellow
Forward Voltage : DC 3V
Head Dia(Approx) : 5mm/0.2"
Terminal Center Distance(Approx) : 2.3mm/0.1"
Overall Height (Approx) : 36mm/1.4"
Color : Red, Green, Yellow, Silver Tone
Material : Plastic, Metal
Weight : 19g
Package Content : 60 Pcs( /-2% ) x Light Emitting Diodes
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

This is a great IIC I2C interface module.
The pin resources of Arduino controller is limited.
But with this I2C interface module, you can realize data display though two wires.
This Module actually cost no more resources at all, It is a surprise for Arduino based project.
Arduino IIC I2C interface
Color: black
Material: CCL
LED 1602/2004 adapter board (not included LED screen)
Pin Definition : GND,VCC,SDA,SCL
Supply voltage: 5V
Size :5.2cm*1.8cm*1.4cm
Compatible for 1602 LCD 2004 LED
Package included:1x PCF8574T module
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

This is a great IIC I2C interface module.
The pin resources of Arduino controller is limited.
But with this I2C interface module, you can realize data display though two wires.
This Module actually cost no more resources at all, It is a surprise for Arduino based project.
Arduino IIC I2C interface
Color: black
Material: CCL
LED 1602/2004 adapter board (not included LED screen)
Pin Definition : GND,VCC,SDA,SCL
Supply voltage: 5V
Size :5.2cm*1.8cm*1.4cm
Compatible for 1602 LCD 2004 LED
Package included:1x PCF8574T module
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

This is a great IIC I2C interface module.
The pin resources of Arduino controller is limited.
But with this I2C interface module, you can realize data display though two wires.
This Module actually cost no more resources at all, It is a surprise for Arduino based project.
Arduino IIC I2C interface
Color: black
Material: CCL
LED 1602/2004 adapter board (not included LED screen)
Pin Definition : GND,VCC,SDA,SCL
Supply voltage: 5V
Size :5.2cm*1.8cm*1.4cm
Compatible for 1602 LCD 2004 LED
Package included:1x PCF8574T module
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

This is a great IIC I2C interface module.
The pin resources of Arduino controller is limited.
But with this I2C interface module, you can realize data display though two wires.
This Module actually cost no more resources at all, It is a surprise for Arduino based project.
Arduino IIC I2C interface
Color: black
Material: CCL
LED 1602/2004 adapter board (not included LED screen)
Pin Definition : GND,VCC,SDA,SCL
Supply voltage: 5V
Size :5.2cm*1.8cm*1.4cm
Compatible for 1602 LCD 2004 LED
Package included:1x PCF8574T module
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

This is another great IIC/I2C/TWI/SPI Serial Interface. As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after，connected with a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display via only 2 wires. If you already has I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for Arduino based project.
I2C Address: 0X20~0X27 (the original address is 0X20,you can change it yourself)
Supply voltage: 5V
the backlight and contrast is adjusted by potentiometer
Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
I2C Address: 0x27 (I2C Address: 0X20~0X27 (the original address is 0X27,you can change it yourself)
Compatible for 1602 LCD
Weight:5g
Size:5.5x2.3x1.4cm
Material: PCB
Package Contents:1x IIC/I2C/TWI/SPI Serial Interface Module Port
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

The improvements compared to the other temperature resistance in the market: Upgrade from the original ordinary temperature probe directly exposed temperature measurement to resistance package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the heating block that support the thermocouple.
The temperature measurement range is increased from -50 Celsius ~ 250 Celsius to -50 Celsius ~ 350 Celsius. It helps a lot to print high-temperature filament, can replace the original K-type thermocouple temperature. If need to print high-temperature filament, the HT-NTC100K thermistors are highly recommended.
The new version of HT-NTC100K temperature measuring thermistor adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
Supports the customization of different specifications, including the temperature head cylinder size, length of the wires. Can be used with the new version of the heater (the new heater can heat up to 350 degrees).
Thermistor temperature measurement is stable. The temperature measurement of the upgraded HT-NTC100K can be up to 350 degrees, can effectively replace the K-type thermocouple. It helps much to solve the issues of strict requirements of K-type thermocouple wiring, and the line is long which is susceptible to get external interference and result in temperature fluctuation that can affect the printing quality.
Model: HT-NTC100K thermistor temperature sensor components
Negative Temperature Coefficient (NTC)Thermistor Model: B3950
Temperature measurement head size: 3

The improvements compared to the other temperature resistance in the market: Upgrade from the original ordinary temperature probe directly exposed temperature measurement to resistance package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the heating block that support the thermocouple.
The temperature measurement range is increased from -50 Celsius ~ 250 Celsius to -50 Celsius ~ 350 Celsius. It helps a lot to print high-temperature filament, can replace the original K-type thermocouple temperature. If need to print high-temperature filament, the HT-NTC100K thermistors are highly recommended.
The new version of HT-NTC100K temperature measuring thermistor adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
Supports the customization of different specifications, including the temperature head cylinder size, length of the wires. Can be used with the new version of the heater (the new heater can heat up to 350 degrees).
Thermistor temperature measurement is stable. The temperature measurement of the upgraded HT-NTC100K can be up to 350 degrees, can effectively replace the K-type thermocouple. It helps much to solve the issues of strict requirements of K-type thermocouple wiring, and the line is long which is susceptible to get external interference and result in temperature fluctuation that can affect the printing quality.
Model: HT-NTC100K thermistor temperature sensor components
Negative Temperature Coefficient (NTC)Thermistor Model: B3950
Temperature measurement head size: 3

The improvements compared to the other temperature resistance in the market: Upgrade from the original ordinary temperature probe directly exposed temperature measurement to resistance package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the heating block that support the thermocouple.
The temperature measurement range is increased from -50 Celsius ~ 250 Celsius to -50 Celsius ~ 350 Celsius. It helps a lot to print high-temperature filament, can replace the original K-type thermocouple temperature. If need to print high-temperature filament, the HT-NTC100K thermistors are highly recommended.
The new version of HT-NTC100K temperature measuring thermistor adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
Supports the customization of different specifications, including the temperature head cylinder size, length of the wires. Can be used with the new version of the heater (the new heater can heat up to 350 degrees).
Thermistor temperature measurement is stable. The temperature measurement of the upgraded HT-NTC100K can be up to 350 degrees, can effectively replace the K-type thermocouple. It helps much to solve the issues of strict requirements of K-type thermocouple wiring, and the line is long which is susceptible to get external interference and result in temperature fluctuation that can affect the printing quality.
Model: HT-NTC100K thermistor temperature sensor components
Negative Temperature Coefficient (NTC)Thermistor Model: B3950
Temperature measurement head size: 3

This is a great IIC I2C interface module.
The pin resources of Arduino controller is limited.
But with this I2C interface module, you can realize data display though two wires.
This Module actually cost no more resources at all, It is a surprise for Arduino based project.
Arduino IIC I2C interface
Color: black
Material: CCL
LED 1602/2004 adapter board (not included LED screen)
Pin Definition : GND,VCC,SDA,SCL
Supply voltage: 5V
Size :5.2cm*1.8cm*1.4cm
Compatible for 1602 LCD 2004 LED
Package included:1x PCF8574T module
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

This is a great IIC I2C interface module.
The pin resources of Arduino controller is limited.
But with this I2C interface module, you can realize data display though two wires.
This Module actually cost no more resources at all, It is a surprise for Arduino based project.
Arduino IIC I2C interface
Color: black
Material: CCL
LED 1602/2004 adapter board (not included LED screen)
Pin Definition : GND,VCC,SDA,SCL
Supply voltage: 5V
Size :5.2cm*1.8cm*1.4cm
Compatible for 1602 LCD 2004 LED
Package included:1x PCF8574T module
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

This is another great IIC/I2C/TWI/SPI Serial Interface. As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after，connected with a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display via only 2 wires. If you already has I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for Arduino based project.
I2C Address: 0X20~0X27 (the original address is 0X20,you can change it yourself)
Supply voltage: 5V
the backlight and contrast is adjusted by potentiometer
Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
I2C Address: 0x27 (I2C Address: 0X20~0X27 (the original address is 0X27,you can change it yourself)
Compatible for 1602 LCD
Weight:5g
Size:5.5x2.3x1.4cm
Material: PCB
Package Contents:1x IIC/I2C/TWI/SPI Serial Interface Module Port
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

This is another great IIC/I2C/TWI/SPI Serial Interface. As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after，connected with a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display via only 2 wires. If you already has I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for Arduino based project.
I2C Address: 0X20~0X27 (the original address is 0X20,you can change it yourself)
Supply voltage: 5V
the backlight and contrast is adjusted by potentiometer
Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
I2C Address: 0x27 (I2C Address: 0X20~0X27 (the original address is 0X27,you can change it yourself)
Compatible for 1602 LCD
Weight:5g
Size:5.5x2.3x1.4cm
Material: PCB
Package Contents:1x IIC/I2C/TWI/SPI Serial Interface Module Port
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

2X(9V Battery Holder
Screw fixing holes
Positive and negative legends clearly marked
With wire leads
Color: Black
Material: Plastic
Size:54x30x20mm
Package included:1x 9V Battery holder
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.)

For 9V Battery Battery Clamps Adapter Button Clips Wire Leads Plastic Housing
Features:
*100% brand new and high quality
*Made of premium material for durable and practical use
*9V Battery cable connector clip, red&black 2-wire connection
*Simple operation, you just need to install an ideal replacement for your old or damaged one in a compact format
Specifications:
*Color: Black Red (As Pictures Show)
*Rated Current: Standard 9V
*Operating Frequency: Low Frequency
*Application Range: Power Supply
Package Contents:
2 * Battery Clamps
Note:
1, The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2, Please allow slight manual measurement deviation for the data.

for Buzzer Equipment Sounders Passive Component AC/2KHz Semiconductors
This Piezo Buzzer component is a electric XT-XXQ with integrated structure which can be used for MINI alarm speaker.
Details:
1. 100% Brand New and High Quality
2. Controllable sound frequencies
3. Resistance:16 ohm
4. Frequency: AC/2KHz
5. Weight: 10g/5 pcs
Package Contents:
Piezo Buzzer(5pcs, Depends on the type you choose)
Note:
The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

5V Piezo Sounders Passive Buzzer Electronic For Arduino MINI Alarm Speaker
This Piezo Buzzer component is a electric XT-XXQ with integrated structure which can be used for MINI alarm speaker.
Details:
1. 100% Brand New and High Quality
2. Controllable sound frequencies
3. Resistance:16 ohm
4. Frequency: AC/2KHz
5. Weight: 10g/5 pcs
Package Contents:
Piezo Buzzer(5pcs, Depends on the type you choose)
Note:
The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

New Passive For Arduino 5pc Buzzer Hot Sounders Mini Ohm Alarm Piezo Speaker
This Piezo Buzzer component is a electric XT-XXQ with integrated structure which can be used for MINI alarm speaker.
Details:
1. 100% Brand New and High Quality
2. Controllable sound frequencies
3. Resistance:16 ohm
4. Frequency: AC/2KHz
5. Weight: 10g/5 pcs
Package Contents:
Piezo Buzzer(5pcs, Depends on the type you choose)
Note:
The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Paint Glue Wire Line Board Silver Conductive Conduction Paste Electrical Durable
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Has excellent electromagnetic wave shielding effect.
* Excellent adhesion to ABS, PC, ABS / PC and other plastic substrates.
*100% pure silver powder medium with excellent electrical conductivity.
* Excellent wear resistance.
* Excellent moisture resistance.
* Excellent drought.
* Good film formation, no dust, hard and durable paint film.
* The product is not easy to precipitate, layering, and strong processability.
Specification:
* Conductive Silver Paint: Solid Content is 47% .
* Resistance: <0.02 ohm / sq
* Recommended Film Thickness: 12-16 Microns
* Solid Powder: 46-48%
* Shielding Effect: > 80dB
* Recommended Diluent: Absolute Ethanol
* Viscosity: > 20000CPS
* Dilution Ratio: Conductive Coating: Thinner = 1:0.7-0.8 (Weight Ratio).
* Hot Air Drying: 70 degrees 30 Minutes, 90 Degrees 15 Minutes, 120 Degrees 5 Minutes.
* Specific Gravity: 25 Degrees Celsius 1.46-1.48g / cm3
* Humidity Test: 85degree Celsius / 85% , Relative Humidity for 7 days, the resistance value is unchanged.
* Naturally Dried: 30 Minutes - 1 Hour
* Film Thickness: 12 Microns
* Optional Model: 0.2ML, 0.3ML, 0.5ML, 1.0ML
Package Contents:
1 * Silver Paint Glue Wire
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Paint Glue Wire Line Board Silver Conductive Conduction Paste Electrical Durable
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Has excellent electromagnetic wave shielding effect.
* Excellent adhesion to ABS, PC, ABS / PC and other plastic substrates.
*100% pure silver powder medium with excellent electrical conductivity.
* Excellent wear resistance.
* Excellent moisture resistance.
* Excellent drought.
* Good film formation, no dust, hard and durable paint film.
* The product is not easy to precipitate, layering, and strong processability.
Specification:
* Conductive Silver Paint: Solid Content is 47% .
* Resistance: <0.02 ohm / sq
* Recommended Film Thickness: 12-16 Microns
* Solid Powder: 46-48%
* Shielding Effect: > 80dB
* Recommended Diluent: Absolute Ethanol
* Viscosity: > 20000CPS
* Dilution Ratio: Conductive Coating: Thinner = 1:0.7-0.8 (Weight Ratio).
* Hot Air Drying: 70 degrees 30 Minutes, 90 Degrees 15 Minutes, 120 Degrees 5 Minutes.
* Specific Gravity: 25 Degrees Celsius 1.46-1.48g / cm3
* Humidity Test: 85degree Celsius / 85% , Relative Humidity for 7 days, the resistance value is unchanged.
* Naturally Dried: 30 Minutes - 1 Hour
* Film Thickness: 12 Microns
* Optional Model: 0.2ML, 0.3ML, 0.5ML, 1.0ML
Package Contents:
1 * Silver Paint Glue Wire
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Paint Glue Wire Line Board Silver Conductive Conduction Paste Electrical Durable
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Has excellent electromagnetic wave shielding effect.
* Excellent adhesion to ABS, PC, ABS / PC and other plastic substrates.
*100% pure silver powder medium with excellent electrical conductivity.
* Excellent wear resistance.
* Excellent moisture resistance.
* Excellent drought.
* Good film formation, no dust, hard and durable paint film.
* The product is not easy to precipitate, layering, and strong processability.
Specification:
* Conductive Silver Paint: Solid Content is 47% .
* Resistance: <0.02 ohm / sq
* Recommended Film Thickness: 12-16 Microns
* Solid Powder: 46-48%
* Shielding Effect: > 80dB
* Recommended Diluent: Absolute Ethanol
* Viscosity: > 20000CPS
* Dilution Ratio: Conductive Coating: Thinner = 1:0.7-0.8 (Weight Ratio).
* Hot Air Drying: 70 degrees 30 Minutes, 90 Degrees 15 Minutes, 120 Degrees 5 Minutes.
* Specific Gravity: 25 Degrees Celsius 1.46-1.48g / cm3
* Humidity Test: 85degree Celsius / 85% , Relative Humidity for 7 days, the resistance value is unchanged.
* Naturally Dried: 30 Minutes - 1 Hour
* Film Thickness: 12 Microns
* Optional Model: 0.2ML, 0.3ML, 0.5ML, 1.0ML
Package Contents:
1 * Silver Paint Glue Wire
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Paint Glue Wire Line Board Silver Conductive Conduction Paste Electrical Durable
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Has excellent electromagnetic wave shielding effect.
* Excellent adhesion to ABS, PC, ABS / PC and other plastic substrates.
*100% pure silver powder medium with excellent electrical conductivity.
* Excellent wear resistance.
* Excellent moisture resistance.
* Excellent drought.
* Good film formation, no dust, hard and durable paint film.
* The product is not easy to precipitate, layering, and strong processability.
Specification:
* Conductive Silver Paint: Solid Content is 47% .
* Resistance: <0.02 ohm / sq
* Recommended Film Thickness: 12-16 Microns
* Solid Powder: 46-48%
* Shielding Effect: > 80dB
* Recommended Diluent: Absolute Ethanol
* Viscosity: > 20000CPS
* Dilution Ratio: Conductive Coating: Thinner = 1:0.7-0.8 (Weight Ratio).
* Hot Air Drying: 70 degrees 30 Minutes, 90 Degrees 15 Minutes, 120 Degrees 5 Minutes.
* Specific Gravity: 25 Degrees Celsius 1.46-1.48g / cm3
* Humidity Test: 85degree Celsius / 85% , Relative Humidity for 7 days, the resistance value is unchanged.
* Naturally Dried: 30 Minutes - 1 Hour
* Film Thickness: 12 Microns
* Optional Model: 0.2ML, 0.3ML, 0.5ML, 1.0ML
Package Contents:
1 * Silver Paint Glue Wire
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Features:
*The FTDI-based USB to TTL serial cable is designed using the standard FT232RL chipset. The cable provides a quick and simple method for connecting devices with a TTL level serial interface to USB.
*TTL level is 3.3V
*The TTL-232R cable is a USB to TTL serial UART converter cable series that combines FTD's FT232RQ USB to serial
*UART interface IC device, can handle all USB signals and protocols. The cable provides a fast and simple connection
*Device with TTL level serial interface to USB
*Each TTL-232R cable contains a small internal electronic circuit board, packaged in USB using FT232R
*The connector end of the cable. The other end of the cable has a variety of different connectors that support various applications.
*The cable complies with FCC, CE and RoHS requirements and provides a 3.3V TTL level.
*The cable can provide 6-direction SIL, 0.1-inch pitch connector, 3.5 mm audio jack, 8-direction keyed 2 mm pitch connector
(Intended for use with VMUSIC2 or VDRIVE2) or bare tinned wire end connections
*The USB end of the cable is USB powered and is compatible with USB 2.0 full speed.
*Supports data transfer rates up to 3 Mbaud
Specifications:
*Black line: GND
*White line: RXD
*Green line: TXD
*Yellow line: RTS
*Blue line: CTS
*Line length: 0.5M
Package Contents:
1*Cable
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

6-Pin Cable USB To Serial Module TTL RS232 For Arduino Cable TTL level 3.3V
Features:
*The FTDI-based USB to TTL serial cable is designed using the standard FT232RL chipset. The cable provides a quick and simple method for connecting devices with a TTL level serial interface to USB.
*TTL level is 3.3V
*The TTL-232R cable is a USB to TTL serial UART converter cable series that combines FTD's FT232RQ USB to serial
*UART interface IC device, can handle all USB signals and protocols. The cable provides a fast and simple connection
*Device with TTL level serial interface to USB
*Each TTL-232R cable contains a small internal electronic circuit board, packaged in USB using FT232R
*The connector end of the cable. The other end of the cable has a variety of different connectors that support various applications.
*The cable complies with FCC, CE and RoHS requirements and provides a 3.3V TTL level.
*The cable can provide 6-direction SIL, 0.1-inch pitch connector, 3.5 mm audio jack, 8-direction keyed 2 mm pitch connector
(Intended for use with VMUSIC2 or VDRIVE2) or bare tinned wire end connections
*The USB end of the cable is USB powered and is compatible with USB 2.0 full speed.
*Supports data transfer rates up to 3 Mbaud
Specifications:
*Black line: GND
*White line: RXD
*Green line: TXD
*Yellow line: RTS
*Blue line: CTS
*Line length: 0.5M
Package Contents:
1*Cable
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Cable TTL level 3.3V GND RXD FTDI FT232RL USB To Serial TTL RS232 Cable Set
Features:
*The FTDI-based USB to TTL serial cable is designed using the standard FT232RL chipset. The cable provides a quick and simple method for connecting devices with a TTL level serial interface to USB.
*TTL level is 3.3V
*The TTL-232R cable is a USB to TTL serial UART converter cable series that combines FTD's FT232RQ USB to serial
*UART interface IC device, can handle all USB signals and protocols. The cable provides a fast and simple connection
*Device with TTL level serial interface to USB
*Each TTL-232R cable contains a small internal electronic circuit board, packaged in USB using FT232R
*The connector end of the cable. The other end of the cable has a variety of different connectors that support various applications.
*The cable complies with FCC, CE and RoHS requirements and provides a 3.3V TTL level.
*The cable can provide 6-direction SIL, 0.1-inch pitch connector, 3.5 mm audio jack, 8-direction keyed 2 mm pitch connector
(Intended for use with VMUSIC2 or VDRIVE2) or bare tinned wire end connections
*The USB end of the cable is USB powered and is compatible with USB 2.0 full speed.
*Supports data transfer rates up to 3 Mbaud
Specifications:
*Black line: GND
*White line: RXD
*Green line: TXD
*Yellow line: RTS
*Blue line: CTS
*Line length: 0.5M
Package Contents:
1*Cable
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Cable TTL level 3.3V GND FTDI FT232RL USB To Serial For Arduino Cable Set
Features:
*The FTDI-based USB to TTL serial cable is designed using the standard FT232RL chipset. The cable provides a quick and simple method for connecting devices with a TTL level serial interface to USB.
*TTL level is 3.3V
*The TTL-232R cable is a USB to TTL serial UART converter cable series that combines FTD's FT232RQ USB to serial
*UART interface IC device, can handle all USB signals and protocols. The cable provides a fast and simple connection
*Device with TTL level serial interface to USB
*Each TTL-232R cable contains a small internal electronic circuit board, packaged in USB using FT232R
*The connector end of the cable. The other end of the cable has a variety of different connectors that support various applications.
*The cable complies with FCC, CE and RoHS requirements and provides a 3.3V TTL level.
*The cable can provide 6-direction SIL, 0.1-inch pitch connector, 3.5 mm audio jack, 8-direction keyed 2 mm pitch connector
(Intended for use with VMUSIC2 or VDRIVE2) or bare tinned wire end connections
*The USB end of the cable is USB powered and is compatible with USB 2.0 full speed.
*Supports data transfer rates up to 3 Mbaud
Specifications:
*Black line: GND
*White line: RXD
*Green line: TXD
*Yellow line: RTS
*Blue line: CTS
*Line length: 0.5M
Package Contents:
1*Cable
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Soldering 1* Electronics Project Kit SMD Electrical Equipment Practical
Item Details:
100% brand new and high quality
Made of high quality material, durable and practical to use
Surface-Mount Soldering Practice Board with Rotating LED Circuit
This project is aimed at those new to soldering surface-mount components. It allows you to hone your skills in soldering resistors, capacitors, diodes and LEDs, transistors and IC chips. The kit includes an 85x54mm printed circuit board (PCB) and 126 surface-mount (SMD) electronic components. A simple rotating light wheel project in the central section of the PCB gives you the chance to put your newly learned skills to the test!
The areas on the left and right sides of the PCB are for practicing your soldering skills, while the central area has a functional electronics project with sequentially flashing coloured LEDs.
In the practice zones, you can improve your expertise at surface-mount soldering with 78 components in four standard sizes ('1206', '0805', '0603' and '0402'). The board is compatible with surface mount soldering techniques using a soldering iron and fine solder wire, or solder paste and a hot-air rework station, or even with a professional reflow oven. If you haven't had any experience with soldering surface-mount components before, you can find many helpful instructional videos online. Each column of practice zone components is connected to test pads at the bottom of the board, so that you can use a multimeter to check that everything is well connected.
The project area of the board will, if soldered correctly, reward you with a spinning display of 15 coloured LEDs! There are 48 components in the project. A sheet of detailed instructions in English is provided. Once you have finished soldering, simply connect a battery or other DC voltage of between 4V and 12V (not supplied) to the power input pads to launch the rotating light display!
Please note that LED colour may vary from that pictured.
Package Contents:
1*Circuit Board Electronics Project DIY Kit
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

1~500K Potentiometer Wirewound Variable 10Turn 3590S Precision Multi-turn Useful
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*10 turn potentiometer 3590S wirewound variable precision multi-turn POT
*High precision wirewound potentiometer. 10 turns.
*Commonly known as "multi-turn potentiometer" and 3590S
*You can replace the single (or quarter turn) potentiometer with one to provide higher accuracy.
Specification:
*Number of Revolutions: 10
*Rated Power: 2W
*Rotating Life: 1 - 2 Million Shafts
*Operating Temperature Range: -40 To 125 ° C
*Axis Length : 11.5mm(Approx.)
*Shaft Diameter: 6.3mm(Approx.)
*Chassis Cutting: Diameter 10mm(Approx.)
*Maximum Body Diameter Solder Connector Tags: 26mm(Approx.)
*Optional Types: 1~500K
Package Contents:
1*10 Turn Potentiometers
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

1~500K Potentiometer Wirewound Variable 10Turn 3590S Precision Multi-turn Useful
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*10 turn potentiometer 3590S wirewound variable precision multi-turn POT
*High precision wirewound potentiometer. 10 turns.
*Commonly known as "multi-turn potentiometer" and 3590S
*You can replace the single (or quarter turn) potentiometer with one to provide higher accuracy.
Specification:
*Number of Revolutions: 10
*Rated Power: 2W
*Rotating Life: 1 - 2 Million Shafts
*Operating Temperature Range: -40 To 125 ° C
*Axis Length : 11.5mm(Approx.)
*Shaft Diameter: 6.3mm(Approx.)
*Chassis Cutting: Diameter 10mm(Approx.)
*Maximum Body Diameter Solder Connector Tags: 26mm(Approx.)
*Optional Types: 1~500K
Package Contents:
1*10 Turn Potentiometers
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

1~500K Potentiometer Wirewound Variable 10Turn 3590S Precision Multi-turn Useful
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*10 turn potentiometer 3590S wirewound variable precision multi-turn POT
*High precision wirewound potentiometer. 10 turns.
*Commonly known as "multi-turn potentiometer" and 3590S
*You can replace the single (or quarter turn) potentiometer with one to provide higher accuracy.
Specification:
*Number of Revolutions: 10
*Rated Power: 2W
*Rotating Life: 1 - 2 Million Shafts
*Operating Temperature Range: -40 To 125 ° C
*Axis Length : 11.5mm(Approx.)
*Shaft Diameter: 6.3mm(Approx.)
*Chassis Cutting: Diameter 10mm(Approx.)
*Maximum Body Diameter Solder Connector Tags: 26mm(Approx.)
*Optional Types: 1~500K
Package Contents:
1*10 Turn Potentiometers
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

1~500K Potentiometer Wirewound Variable 10Turn 3590S Precision Multi-turn Useful
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*10 turn potentiometer 3590S wirewound variable precision multi-turn POT
*High precision wirewound potentiometer. 10 turns.
*Commonly known as "multi-turn potentiometer" and 3590S
*You can replace the single (or quarter turn) potentiometer with one to provide higher accuracy.
Specification:
*Number of Revolutions: 10
*Rated Power: 2W
*Rotating Life: 1 - 2 Million Shafts
*Operating Temperature Range: -40 To 125 ° C
*Axis Length : 11.5mm(Approx.)
*Shaft Diameter: 6.3mm(Approx.)
*Chassis Cutting: Diameter 10mm(Approx.)
*Maximum Body Diameter Solder Connector Tags: 26mm(Approx.)
*Optional Types: 1~500K
Package Contents:
1*10 Turn Potentiometers
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

1~500K Potentiometer Wirewound Variable 10Turn 3590S Precision Multi-turn Useful
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*10 turn potentiometer 3590S wirewound variable precision multi-turn POT
*High precision wirewound potentiometer. 10 turns.
*Commonly known as "multi-turn potentiometer" and 3590S
*You can replace the single (or quarter turn) potentiometer with one to provide higher accuracy.
Specification:
*Number of Revolutions: 10
*Rated Power: 2W
*Rotating Life: 1 - 2 Million Shafts
*Operating Temperature Range: -40 To 125 ° C
*Axis Length : 11.5mm(Approx.)
*Shaft Diameter: 6.3mm(Approx.)
*Chassis Cutting: Diameter 10mm(Approx.)
*Maximum Body Diameter Solder Connector Tags: 26mm(Approx.)
*Optional Types: 1~500K
Package Contents:
1*10 Turn Potentiometers
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

1~500K Potentiometer Wirewound Variable 10Turn 3590S Precision Multi-turn Useful
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*10 turn potentiometer 3590S wirewound variable precision multi-turn POT
*High precision wirewound potentiometer. 10 turns.
*Commonly known as "multi-turn potentiometer" and 3590S
*You can replace the single (or quarter turn) potentiometer with one to provide higher accuracy.
Specification:
*Number of Revolutions: 10
*Rated Power: 2W
*Rotating Life: 1 - 2 Million Shafts
*Operating Temperature Range: -40 To 125 ° C
*Axis Length : 11.5mm(Approx.)
*Shaft Diameter: 6.3mm(Approx.)
*Chassis Cutting: Diameter 10mm(Approx.)
*Maximum Body Diameter Solder Connector Tags: 26mm(Approx.)
*Optional Types: 1~500K
Package Contents:
1*10 Turn Potentiometers
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.