Egyéb elektromos berendezések és kellékek

Description:
Description:
The Digispark is an Attiny85 based microcontroller development board similar to the line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar IDE the Digispark is a great way to jump into electronics, or perfect for when an is too big or too much.
The Digispark is shipped fully assembled except for the two included and easy to solder headers.
The Specs:1. Support for the IDE 1.0 (OSX/Win/Linux).
2. Power via USB or External Source - 5v or 7-16v (automatic selection).
3. On-board 150ma 5V Regulator.
4. Built-in USB (and serial debugging).
5. 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
6. 8k Flash Memory (about 6k after bootloader).
7. I2C and SPI (vis USI).
8. PWM on 3 pins (more possible with Software PWM).
9. ADC on 4 pins.
10. Power LED and Test/Status LED .
Package Included:1 x NEW Digispark Kickstarter ATTINY85 General Micro USB Development Board
Preview:

Description:
Descriptions:
FT232RL Adapter Module;
Chip: FT232RL;
USB supply power, can choose 5V or 3.3V interface level;
PCB size: 16mm x 34mm;
Elicit all signal port of FT232RL chip, TTL/CMOS level;
RXD/TXD transceiver communication signals indicator light;
If need other level, can provide target voltage on VCC and GND pin directly;
Package Included:
1 x FT232RL Module
Preview:

Description:
Module parameters:
1. Size: 38mm (length) * 22mm (W) * 14mm (height)
2. Weight: 8g
3. Operating voltage :3.3 - 5 .5 V
4. Clock chip: high-precision clock chip DS3231
5. Clock Accuracy :0-40 range, the accuracy 2ppm, the error was about 1 minute
6. Calendar alarm clock with two
7. Programmable square-wave output
8. Real time clock generator seconds, minutes, hours, day, date, month and year timing and provide valid until the year 2100 leap year compensation
9. Chip temperature sensor comes with an accuracy of ± 3
10. Memory chips: AT24C32 (storage capacity 32K)
11. IIC bus interface, the maximum transmission speed of 400KHz (working voltage of 5V)
12. Can be cascaded with other IIC device, 24C32 addresses can be shorted A0/A1/A2 modify default address is 0x57
13. With rechargeable battery CR2032, to ensure the system after power failure, the clock move any natural normal
14. Packing: single anti-static packaging
Wiring instructions ( for uno r3 for example):SCL → A5
SDA → A4
VCC → 5V
GND → GND
Package included:100% Brand New
1 x DS3231 AT24C32 IIC Module
Preview:

Description:
Description:
4x5 Matrix Micro Switch Keypad with 8 LEDs
61 x 51 x 12mm (l x w x h)
20 Buttons
16 Switch Matrix
4 separate switches
8 LEDS
3.2 - 5V input
Includes 4 standoffs and screws
Mounting holes (55/45mm)
Designed to be compatible with standard 2.54mm sockets
Package include:
1pc Keyboard Buttons Keypad
Preview:

description:100% new high quality
Color as shown
Commonly used line width reference (unit: mm)
Angle measurement: 180 degrees
Device, IC pin spacing table: 0.5mm, 0.65mm, 0.8mm, 1.0mm, 1.25mm, 2.54mm;
Common bore diameter reference dimensions (unit: mm): 3.0 2.5 2.0 1.5 1.0 0.8 0.5 0.4
Uses: Used for measurement
Packing: 1 x 25cm Multifunctional PCB Ruler

Description:Description:Raspberry Pi 2 B has improved video and audio output and it is combined into a 3.5mm interface. So with the domestic standard AV cable, there will be no image or the image will flicker. This AV Cable For Raspberry Pi 2 Model B supports one to three outputs and can connect both audio and video.
Features:
It can solve the problem of video output.
Supports one to three outputs and can connect both audio and video.
This AV cable was tested to be compatible with Raspberry Pi 2 Model B
Specification:Length: 68.5cm / 27inch
Package Weight: 23g
Quantity: 1pc
Fitments: For Raspberry Pi 2 Model B
Package included:1 x AV Cable For Raspberry Pi 2 Model B
1 x 3.5mm Connector
Preview:

Description:
Product Introduction
JDY-64 is a low-power lossless dual-channel stereo solution design. The overall performance is very advantageous. Users only need to connect the module to the application product to quickly realize wireless music transmission and other functions.
Applications
DY-64 is mainly used in mobile phones, computers, PAD, etc. It can be used in Bluetooth mono headsets, headsets, Bluetooth dual-channel headsets, Bluetooth speakers, Bluetooth audio receivers, etc.
parameter
model
JDY-64 with bottom plate
Bluetooth version
Bluetooth V4.2
Support Bluetooth protocol
HFPV1.7, A2DPV1.2, AVRCPV1.5, AVCTPV1.2, AVDTPV1.2
Operating Voltage
Support 5V or 3.3 to 4.2V power supply
Broadcast state current: 5.5mA
After connection
Working current: 20MA
Working temperature: -40℃-80℃
Transmission distance: 15m
Sensitivity: -87dbm
The package includes:1*module
Preview:

Description:
Product Introduction
JDY-64 is a low-power lossless dual-channel stereo solution design. The overall performance is very advantageous. Users only need to connect the module to the application product to quickly realize wireless music transmission and other functions.
Applications
DY-64 is mainly used in mobile phones, computers, PAD, etc. It can be used in Bluetooth mono headsets, headsets, Bluetooth dual-channel headsets, Bluetooth speakers, Bluetooth audio receivers, etc.
parameter
model
JDY-64 with bottom plate
Bluetooth version
Bluetooth V4.2
Support Bluetooth protocol
HFPV1.7, A2DPV1.2, AVRCPV1.5, AVCTPV1.2, AVDTPV1.2
Operating Voltage
Support 5V or 3.3 to 4.2V power supply
Broadcast state current: 5.5mA
After connection
Working current: 20MA
Working temperature: -40℃-80℃
Transmission distance: 15m
Sensitivity: -87dbm
The package includes:1*module
Preview:

Description:
This wireless Transceiver module is an easy and suitable module if
you want to setup your wireless communication system with low cost!!
It can achieve a good balance between wireless transition performance and cost!
You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system!
What\'s more, this nRF24L01 module is designed with Power amplifier and SMA antenna
This allowed you to use the wireless communication up to 1000 meters! (No barrier)
Specifications:Frequence: 2.4GHz~2.5GHz
Operating voltage: 3 ~ 3.6V
Max Current: 115mA
Multi-frequency: 125 frequency
Support up to six channels of data reception
Package Includes:
1PC*New NRF24L01 PA LNA SMA Antenna Wireless Transceiver communication module
1PC*SMA Antenna

3S 40A Li-ion Lithium Battery Charger Module BMS Protection With Balance Board
Description:
Board Size:42 * 60 * 3.4mm
Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
Item:3S 40A 12.6V 40A lithium battery protection board (comes with recovery function-AUTO Recovery)
Charging voltage: 12.6V - 13.6V
Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)
Continuous charge current (upper limit): 20A
Model Number:3S 40A
Product weight: 4g
New upgrade version:
1, increased anti-interference function,
2, reduce the large current heat by 30% ,
3, starting power increased from 135W to 170W (3S40A)
Standard version: for starting current below 80A, power 135W below the drill.
Balanced version: suitable for starting current below 80A, power 135W below the drill.
Note 1: The successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 can not start the drill!!).
Note 2: strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, do not deliberately short circuit.
Note 3: When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor's positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.
Note 4: 3 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop faster battery that group is poor battery.
For some of the poor basis of electronic customers to explain: balanced charge is only auxiliary functions, try not to put a good battery and poor battery mixed together! 3 sets of battery capacity / resistance closer to the better! (2 good battery 1 Poor battery use effect = 3 poor battery use effect).
Enhanced version:Suitable for electric drill with starting current below 80A and power below 130W .(without balanced function)
Balanced version: Suitable for electric drill with starting current below 80A and power below 170W .(with balanced charging function)
Package include:
1* 3S 40A Protection Board
Preview:

Note:It's BT-06 Bluetooth module
Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer.
Works with any USB Bluetooth adapters.
Default Baud Rate: 9600,8,1,n.
Built in antenna.
Coverage up to 30ft.
Bluetooth version: V2.0 EDR
Operating voltage: 3.3V
Default Baud Rate: 9600,8,1,n.
Signal coverage: 30ft
Item weight: 3g
Package size: 9 * 3 * 1cm
Package weight: 8g
Commercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC.GND.TXD.RXD foot for the Bluetooth
With "Re-seach" button(ON/OFF/WAKE foot for it , external MCU outinput "High level" can control module to re-seach)
Compatible with bluetooth master module".slave module"or master-slave(whole) module.
Input voltage: 3.3~6V
Size: 1.55cm*3.98cm
Note:input power supply 3.3~6V, Prohibit more than 7V
No "Automatically prevent power supply peversing func", so please correctly connect power supply
We advise to install "Bluetooth master module"
The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse" ; when bluetooth "connected", output "High level", we can determine the states from "MCU"
If only the board , No any "Bluetooth Function "
Package Included:
1PCS*BT-06 bluetooth module with backboard

Specification:
100% brand new with high quality
Material: Electrical Components
Color: Blue
Used for modding gamecube consoles
Allows you to play Import and backup games.
Easy to install - Need directions just do a quick Google search.
Package Included:
1 x Direct- Reading Chip
Note:
Please allow minor error due to manual measurement.
The colors may be a little difference for the different monitor display.

Description:
This is a basic, 4-digit 7-segment clock display module .
The display shows Double dots as shown
Module connecting to digital I/O on 2 pins.
For Arduino use library: TM1637.h
Package included:
1*4-Digit LED 0.56" 7 Segments Display Tube TM1637 Clock Double dots Module 0.56inch For Arduino
Preview:

Loosen socket due to broken screw hook? Now, buy this Socket Screw Hook to help you tighten your loosen socket!
Socket Screw Hook can helps you solve your problem instead of hiring a maintenance staff for repair the Socket,it's is very easy to use and it save your money and your time.
Socket Screw Hook is made of high quality materiel. It is durable and resistant to corrosion and rust. It preventing looseness effectively. This functional tool can make your work more easier and faster. So, stop wasting money for hiring repairman when you can do it yourself easily!
Note:Every Pack include 10 pcs repair part with screws.
The products not included of the Wall socket box.

Specifications:Name: Combination Fixer
Color: black, white, pink, yellow, green and blue
Back glue: conventional foamed cotton back glue
Product Material: TPR
Features:Silicone cable clips, make your desk and office clean and tidy.
Universal, compatible with kinds of cables, such as charging cables, USB cables, audio cables, network cables, etc.
Strong adhesive force, never fall off.
Light and durable, trendy and flexible, easy to carry.
Color optional, you can choose any color you like
Packaging includes:10 * Cable Clips

Specifications:Name: Combination Fixer
Color: black, white, pink, yellow, green and blue
Back glue: conventional foamed cotton back glue
Product Material: TPR
Features:Silicone cable clips, make your desk and office clean and tidy.
Universal, compatible with kinds of cables, such as charging cables, USB cables, audio cables, network cables, etc.
Strong adhesive force, never fall off.
Light and durable, trendy and flexible, easy to carry.
Color optional, you can choose any color you like
Packaging includes:10 * Cable Clips

Specifications:Name: Combination Fixer
Color: black, white, pink, yellow, green and blue
Back glue: conventional foamed cotton back glue
Product Material: TPR
Features:Silicone cable clips, make your desk and office clean and tidy.
Universal, compatible with kinds of cables, such as charging cables, USB cables, audio cables, network cables, etc.
Strong adhesive force, never fall off.
Light and durable, trendy and flexible, easy to carry.
Color optional, you can choose any color you like
Packaging includes:10 * Cable Clips

Specifications:Name: Combination Fixer
Color: black, white, pink, yellow, green and blue
Back glue: conventional foamed cotton back glue
Product Material: TPR
Features:Silicone cable clips, make your desk and office clean and tidy.
Universal, compatible with kinds of cables, such as charging cables, USB cables, audio cables, network cables, etc.
Strong adhesive force, never fall off.
Light and durable, trendy and flexible, easy to carry.
Color optional, you can choose any color you like
Packaging includes:10 * Cable Clips

Specifications:Name: Combination Fixer
Color: black, white, pink, yellow, green and blue
Back glue: conventional foamed cotton back glue
Product Material: TPR
Features:Silicone cable clips, make your desk and office clean and tidy.
Universal, compatible with kinds of cables, such as charging cables, USB cables, audio cables, network cables, etc.
Strong adhesive force, never fall off.
Light and durable, trendy and flexible, easy to carry.
Color optional, you can choose any color you like
Packaging includes:10 * Cable Clips

Specifications:Name: Combination Fixer
Color: black, white, pink, yellow, green and blue
Back glue: conventional foamed cotton back glue
Product Material: TPR
Features:Silicone cable clips, make your desk and office clean and tidy.
Universal, compatible with kinds of cables, such as charging cables, USB cables, audio cables, network cables, etc.
Strong adhesive force, never fall off.
Light and durable, trendy and flexible, easy to carry.
Color optional, you can choose any color you like
Packaging includes:10 * Cable Clips

Specifications:Name: Combination Fixer
Color: black, white, pink, yellow, green and blue
Back glue: conventional foamed cotton back glue
Product Material: TPR
Features:Silicone cable clips, make your desk and office clean and tidy.
Universal, compatible with kinds of cables, such as charging cables, USB cables, audio cables, network cables, etc.
Strong adhesive force, never fall off.
Light and durable, trendy and flexible, easy to carry.
Color optional, you can choose any color you like
Packaging includes:10 * Cable Clips

Description:
Model: Master-slave integrated Bluetooth module
Type: Power Module
Power: HC-05
Use: computer
HC05 compatible version
Product size: 3.6 * 1.5cm
Package includes: HC-05 master-slave integrated Bluetooth module with backplane * 1
Preview:

WeMos D1 WiFi ESP8266 UNO ESP-12E IOT Development Board For Arduino IDE Wireless
Descriptions:
Based on ESP-8266EX
Arduino compatible, using Arduino IDE to program
11 x I / O pins
1 x ADC pin (input range of 0-3.3V)
Support OTA wireless upload
Onboard 5V 1A Switching Power Supply (highest input voltage 24V)
After installing the hardware package,
the direct use of Arduino IDE development, the same operation with Arduino UNO
Package include:
1 x OTA WeMos CH340 D1 WiFi Arduino UNO R3 Development Board ESP8266 ESP-12E
Preview:

Made of fine quality material, practical, easy to operate and use, wide range of applications, has a long service life.
Characteristics:The Tesla coil can produce high temperature and high pressure plasma, which can sing, ignite, wireless transmission, and light fluorescent lamp.
Tesla on the basis of the general increase of the music player, you can play phone / computer music, clear sound.
This is a mini DIY Tesla kit that must be assembled. It is a perfect teaching tool to spark interest from science students, and also a perfect gift.
It has the function of wireless transmission and can light gaseous tubes.
This Tesla can play many types of music in fine quality.
Specifications:Material: PCB
Power: DC 12-24 V, current 2A
Audio input: mobile phone, MP3, computer audio, etc. (3.5 headphone jack)
Circuit board size: 75 * 39mm / 3.0 * 1.5in
Cylinder height: 67mm / 2.6in
Package size: 80 * 80 * 50mm / 3.1 * 3.1 * 2.0in
Package weight: 50g / 1.8ounce
Note: Do not touch the heat sink with your hands when using.
Packing List:1 * Set of Electronic Parts (not installed)

Intermittent Lighting Magic Props Electronic DIY Parts U47 Mini Tesla Coil TOP
Description
Type:Tesla Coil Assembly
Power: 15 W
Plate size: 4.0x8.0mm
Power input: DC 15-24 V, current 2A, DC5.5 / pin line interface
Audio Input: 3.5 jack, can be connected to cell phone, mp3, computer audio
Package includes:1*DIY Tesla Coil Kit
Tesla functional parameters: 15-24 V DC Input voltage, 2A current, work when the heat is relatively large, so that the heat sink is relatively warm! When using, be careful not to touch the radiator by hand.
Tesla coil can not only light Neon, energy saving lamp, flashing lamp intermittently, but also light cigarette intermittently.
The primary coil is already in the PCB board. It does not need to be wound on the outside. It is convenient for fans to install, high efficiency and beautiful.The Tesla coil is very safe.
It can't be used for people, it can be used for student experiments, graduation design work, etc.
Note:
DIY need for yourself
1-2 cm error may exist due to manual measurement, please kindly understand. The offset colors may be different due to different monitor settings.

Description:
New Pcie Pci-e Pci Express Riser Card 1x To 16x GPU Usb 3.0 Extender Riser X1 X16 Card Adapter SATA 6Pin Power Cable Miner
Features:1. 100% Brand new and high quality.
2. Using 60cm USB 3.0 cable as extender cable ,premium quality and super speed.
3. With 3x FP solid capacitors, making graphics power supply more stable and secure.
4. With SATA 15pin Male to 6pin power cable,more powerful,and reduce the burden of the motherboard.
5. Gold plated contacts for better connectivity and long life .
6. Compatible with 1x,4x,8x,16x PCI-E slot of the motherboard.
7. With side clip to fasten other card.
8. No driver needed.
9. Dedicated for bitcoin mining.
10.Board size: approx.12.8cm*4.2cm*1.0cm/5.03*1.65*0.39''
11:Colour: Blue
12. USB Cable Length: approx.60cm/1.96 feet
Notes: Please allow 1-3cm error due to manual measurement and there will be different color as different display, please understand. Thanks.
Package Content:1 x PCI-E 16X adapter
1 x PCI-E 1X Riser Board
1 x USB 3.0 Cable
1 x SATA 15 Pin-6Pin Power Cable
Preview:

Features:
*Full Surface Mounted Technology
*Wide range of operating voltage
*Input reverse connection protection
*Dual audio output terminals
*Antenna external connection (suitable for mounting inside a metal box)
*LED indicator instructions:
Quick flashing: waiting for a connection
Slow flashing: audio playing
Keeps on: connected
Specifications:
*BT Bluetooth Module V1.2
*Input voltage range: DC 5-35V
*Bluetooth version: 4.2
*Bluetooth name: LQSC_BT
*Working temperature: -40degree Celsius to 85degree Celsius
*Outer dimensions: 55.12*32.26(MM) (Approx.)
Package Contents:
1* MP3 Bluetooth Decoder board
1*2.54mm 3P Audio Shielding Line
1*2.54mm 3P-Socket Terminal

Description:
Features:
l Can be used for 13.56M contactless communication
l Support SPI, IIC, UART interface switching.
l The long effective communication distance is 5 cm
l Compatible with ISO14443 TYPE A and B standards
Specifications:
l Chip: NXP PN532
l Working voltage: 3.3~5.5V
l Power supply current: 150 mA
l Working current : 100 mA
l Working current (write mode): 120 mA
l Working current (reading mode): 120 mA
l Pointer: PWR
l Interface: Raspberry Pi's 20pins interface standard SPI interface
Package Include:
l 1 x Card Reader Writer Module
Preview:

Description:
100% Brand New and High Quality
Ultra-small 802.11b/g/n Wi-Fi BT/BLE SoC module
- Low-power dual-core 32-bit CPU for application processors
- Up to 240MHz, up to 600 DMIPS
- Built-in 520 KB SRAM, external 4M PSRAM
- Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
- Support OV2640 and OV7670 cameras with built-in flash
- Support for images WiFI upload
-Support TF card
- Support multiple sleep modes
- Embedded Lwip and FreeRTOS
- Support STA/AP/STA AP working mode
- Support Smart Config/AirKiss One-click distribution network
- Support for serial local upgrade and remote firmware upgrade (FOTA)
Specifications:
The ESP32-CAM has a very competitive small-size camera module that can operate independently as a minimum system, measuring only 27*40.5*4.5mm, with deep sleep current and a minimum of 6mA.
ESP-32CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
ESP-32CAM is packaged in DIP and can be directly plugged into the backplane for quick production. It provides customers with a highly reliable connection method and is convenient for use in various IoT hardware terminals.
Package Included:
1 x ESP32-CAM Module
1 x Camera Module OV2640
Notes:
This product contains the OV2640 Camera Module. If you need to use the OV7670 camera, please purchase it separately.
Preview:

Description:
Specification:Model: C09237
Product Name: 170 pcs Rubber Grommet set
Color: Black
Material: Rubber
Features:170 pcs rubber grommet in 7 common sizes.
Variety of size are all in one box, very convenient to use.
Heat-resisting, mineral oil-resisting, wear-resisting.
Replace your worn and cracked grommets.
Perfect to use to prevent leaks while working with plumbing, hydraulics, air and gas connections.
Application:Cylinder, valve, pump, electrical appliance, chemical pipe, spray, water pipe, decoration, etc
Content:50 pcs. 7.14 mm
40 pcs. 9.53 mm
30 pcs. 12.07 mm
20 pcs. 15.88 mm
10 pcs. 19.05 mm
10 pcs. 22.23 mm
10 pcs. 25.40 mm
Note:1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.
2.Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)
3.There are no instructions included in this kit.Professional Installation Is Highly Recommended
Package Included:170pcs Rubber Grommets (as photo show)
Preview:

Features:
l 100% brand new and high quality
l Repair your PS4 by replacing the Lens
l Professional installation required
l The new lens may solve these problems:Cannot Read, Disk Read Error, Freezing, Skipping, Slow Loading, Dirty Disk Error
l Suitable for PS4 1000 models
Package Include:
l 1 x Lens

Description:
Feature :1. Design With 2 Extra Mirror Covers: Different from the general car windshield cover SUV, our BairyLink car cover will come with two ear covers to protect the car mirrors. So you will never need to worry about the damage to the mirrors again. With the help of personalized design, the BairyLink car cover for winter protect both the car windscreen and mirror at the same time. Creating a safe environment for your car!
2. Easy to Use with Magnetic Feature: Our BairyLink car windshield cover, there are 9 magnetic buckles in it, which is invisible but helpful.You can easily put the car windshield in its right place. The car windshield cover can be tightly attached to the car, keeping the magnetic edge firmly covering the car wiper and up area, putting the two rear view mirrors into the ear of the windshield cover. please noted that the U magnet in the first picture is not included, no need in fact.
3. Suitable For Almost Cars: With the aluminum foil surface and highquality flame retardant cotton inside, our BairyLink car cover proof SUV has the ability to keep the car front window away from frost, dust, rain and UV rays, leaves, or ice in all weather. Not only can it reduce the time spents craping ice or, but also give you a clear car front screen. But it'sworth noting that this is just waterproof and not suitable for heavy rainy weather.
4. Perfect Size For Most Cars : On the one hand, with the large size of SUV (130CMx160CM), our BairyLink car windshield cover can fit 99% percent of vehicles, such as the general SUV, the truck, the commercial vehicles and so on. On the other hand, it works well in dustproof, waterproof, snowproof, temperature resistant, flame retardant and scratch resistant. The car windshield cover can truly provide effective protection for your car.
Features:
Our BairyLink car windshield with invisible magnet can easily and tightly attached to the car.
The car windshield shade is effective to resist the or ice in winter, it can also protect the frost from the car front window.
With the featrues of Water-proof, Dust-proof, Anti-UV and two mirror covers, the car windshield is suitable for all seasons.
Specifications:
The dimension of car windshield: 130*160cm / 51.2 * 63 inch
Warm Tips:
Not suitable for heavy rainy weather
Package Included:
Car windshield X 1
Preview:

Description:
Feature :1. Design With 2 Extra Mirror Covers: Different from the general car windshield cover SUV, our BairyLink car cover will come with two ear covers to protect the car mirrors. So you will never need to worry about the damage to the mirrors again. With the help of personalized design, the BairyLink car cover for winter protect both the car windscreen and mirror at the same time. Creating a safe environment for your car!
2. Easy to Use with Magnetic Feature: Our BairyLink car windshield cover, there are 9 magnetic buckles in it, which is invisible but helpful.You can easily put the car windshield in its right place. The car windshield cover can be tightly attached to the car, keeping the magnetic edge firmly covering the car wiper and up area, putting the two rear view mirrors into the ear of the windshield cover. please noted that the U magnet in the first picture is not included, no need in fact.
3. Suitable For Almost Cars: With the aluminum foil surface and highquality flame retardant cotton inside, our BairyLink car cover proof SUV has the ability to keep the car front window away from frost, dust, rain and UV rays, leaves, or ice in all weather. Not only can it reduce the time spents craping ice or, but also give you a clear car front screen. But it'sworth noting that this is just waterproof and not suitable for heavy rainy weather.
4. Perfect Size For Most Cars : On the one hand, with the large size of SUV (130CMx160CM), our BairyLink car windshield cover can fit 99% percent of vehicles, such as the general SUV, the truck, the commercial vehicles and so on. On the other hand, it works well in dustproof, waterproof, snowproof, temperature resistant, flame retardant and scratch resistant. The car windshield cover can truly provide effective protection for your car.
Features:
Our BairyLink car windshield with invisible magnet can easily and tightly attached to the car.
The car windshield shade is effective to resist the or ice in winter, it can also protect the frost from the car front window.
With the featrues of Water-proof, Dust-proof, Anti-UV and two mirror covers, the car windshield is suitable for all seasons.
Specifications:
The dimension of car windshield: 130*160cm / 51.2 * 63 inch
Warm Tips:
Not suitable for heavy rainy weather
Package Included:
Car windshield X 1
Preview:

Description:
Description:Newest 2.4G Wireless Mini Keyboard with Touchpad
Numpad for Windows PC, Laptop, Smart TV, HTPC, IPTV, Android Box TV
2.4G wireless keyboard touchpad
Suitable for most computers,Laptops,Desktops,etc.
R shape angle of keycaps,comfort to type.
Operating distance is up to 10 meters
Specification:Size: about 258*98*15mm
Working voltage: 1.8-3.0V
Working current: ≤ 2.5mA
Working temperature -10 ℃ 55 ℃
Sleep: without operation in 2-3 seconds
Reconnection time: 2-3 seconds
Wake-up duration ≤ 3 seconds
Battery capacity: 2 * AAA battery (Not included)
Service life of key: 3 million keystrokes
Strength of striking the button: 50-70 g
Connection distance: ≤ 10m
Number of keys: 59 key
Package Included:1 * Wireless Touch Keyboard
1 * Manual
Notes:1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3cm measuring deviation due to manual measurement.
3. The keyboard is of mini size, it is suggested to use with tablet or mobile phone.
Preview:

Description:
Description:Ac9010h voltage meter is a type of new physical current voltage that can measure voltage, current, charge and discharge capacity, time and energy, etc. Meanwhile, it can also set the parameter to achieve overvoltage protection, over loading capacity, and limit protection, etc. Vac9010h use the non-contact detection of the hall to check the current, which can safely detect the current and use it convenient. Measured data and instrument used color lcd to display. The information will be comprehensive and humane. The meter is very suitable for monitoring the output voltage and current, as well as battery charging and discharging and other applications.
Features:100% brand new and high quality
For the user to charge and discharge can be automatic identification and bidirectional current direction, no need to change the direction of the wiring.
Aafter turning off the memory function, turning off the ah number, it is convenient for people to observe and measure.
AH number and current reset function, do not affect the next measurement.
Voltage, current, charging capacity ah, wh, time, energy will show at the same time, too, shou all information clearly.
With the output and off function, flexible cab to open or disconnect the output (relay need).
With over voltage, over current, over power, litmited time, load protection function, etc.
Can calibrate online, give a convenience for the customer to correct the error in time.
LCD panel can be manually put out or less than 300m automatically screen out in one minute.
By detecting the current sensor of the hall, the current through the round hole of the thr wire through the thr sensor, both the current of the side direction can be detected. It is safe and convenient for users.
Applicable scope: charge monitoring and discharge of electric vehicle battery, photovoltaic electricity monitoring system and so on, the first current empty charge charging needs to clean.
Specification:Type: VAC9010H
Optional Current: 100A/200A/300A/500A
Screen resolution: 0.1A
Voltage measurement range: Own power supply 12-90V ; External power supply 0-90V
Current accuracy: ±3% ±5 word
Accuracy voltage: ±2% ±5 word
Screen resolution tension: 0.01V
Screen resolution capacity: 0.1AH
Screen resolution time: 0.01H(1 min)
Measurement rate: 5 times/ second
Type of protection and define(OVP): 0.01V-90V
Type of protection and define(OPP): 0.01W-9.99KW
Type of protection and define(LOP): 0.01V-90V
Type of protection and define(OCP): 0.1-100A
Type of protection and define(OAH): 0.01AH-9999AH
Type of protection and define(OFT): 1min-99hour59min
Size: approx. 79x43x26mm(3.11x1.69x1.02in)
Installation opening: 76.5x39.2mm
Color: As pictures shown.
Quantity: 1 pc
Note:Transition: 1cm=10mm=0.39inch
No retail package.
Please allow 1-3cm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes:1 set x Hall Coulombmeter(other accessories demo in the picture is not included.)
Preview:

Description:
Description:Ac9010h voltage meter is a type of new physical current voltage that can measure voltage, current, charge and discharge capacity, time and energy, etc. Meanwhile, it can also set the parameter to achieve overvoltage protection, over loading capacity, and limit protection, etc. Vac9010h use the non-contact detection of the hall to check the current, which can safely detect the current and use it convenient. Measured data and instrument used color lcd to display. The information will be comprehensive and humane. The meter is very suitable for monitoring the output voltage and current, as well as battery charging and discharging and other applications.
Features:100% brand new and high quality
For the user to charge and discharge can be automatic identification and bidirectional current direction, no need to change the direction of the wiring.
Aafter turning off the memory function, turning off the ah number, it is convenient for people to observe and measure.
AH number and current reset function, do not affect the next measurement.
Voltage, current, charging capacity ah, wh, time, energy will show at the same time, too, shou all information clearly.
With the output and off function, flexible cab to open or disconnect the output (relay need).
With over voltage, over current, over power, litmited time, load protection function, etc.
Can calibrate online, give a convenience for the customer to correct the error in time.
LCD panel can be manually put out or less than 300m automatically screen out in one minute.
By detecting the current sensor of the hall, the current through the round hole of the thr wire through the thr sensor, both the current of the side direction can be detected. It is safe and convenient for users.
Applicable scope: charge monitoring and discharge of electric vehicle battery, photovoltaic electricity monitoring system and so on, the first current empty charge charging needs to clean.
Specification:Type: VAC9010H
Optional Current: 100A/200A/300A/500A
Screen resolution: 0.1A
Voltage measurement range: Own power supply 12-90V ; External power supply 0-90V
Current accuracy: ±3% ±5 word
Accuracy voltage: ±2% ±5 word
Screen resolution tension: 0.01V
Screen resolution capacity: 0.1AH
Screen resolution time: 0.01H(1 min)
Measurement rate: 5 times/ second
Type of protection and define(OVP): 0.01V-90V
Type of protection and define(OPP): 0.01W-9.99KW
Type of protection and define(LOP): 0.01V-90V
Type of protection and define(OCP): 0.1-100A
Type of protection and define(OAH): 0.01AH-9999AH
Type of protection and define(OFT): 1min-99hour59min
Size: approx. 79x43x26mm(3.11x1.69x1.02in)
Installation opening: 76.5x39.2mm
Color: As pictures shown.
Quantity: 1 pc
Note:Transition: 1cm=10mm=0.39inch
No retail package.
Please allow 1-3cm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes:1 set x Hall Coulombmeter(other accessories demo in the picture is not included.)
Preview:

Description:
Description:Ac9010h voltage meter is a type of new physical current voltage that can measure voltage, current, charge and discharge capacity, time and energy, etc. Meanwhile, it can also set the parameter to achieve overvoltage protection, over loading capacity, and limit protection, etc. Vac9010h use the non-contact detection of the hall to check the current, which can safely detect the current and use it convenient. Measured data and instrument used color lcd to display. The information will be comprehensive and humane. The meter is very suitable for monitoring the output voltage and current, as well as battery charging and discharging and other applications.
Features:100% brand new and high quality
For the user to charge and discharge can be automatic identification and bidirectional current direction, no need to change the direction of the wiring.
Aafter turning off the memory function, turning off the ah number, it is convenient for people to observe and measure.
AH number and current reset function, do not affect the next measurement.
Voltage, current, charging capacity ah, wh, time, energy will show at the same time, too, shou all information clearly.
With the output and off function, flexible cab to open or disconnect the output (relay need).
With over voltage, over current, over power, litmited time, load protection function, etc.
Can calibrate online, give a convenience for the customer to correct the error in time.
LCD panel can be manually put out or less than 300m automatically screen out in one minute.
By detecting the current sensor of the hall, the current through the round hole of the thr wire through the thr sensor, both the current of the side direction can be detected. It is safe and convenient for users.
Applicable scope: charge monitoring and discharge of electric vehicle battery, photovoltaic electricity monitoring system and so on, the first current empty charge charging needs to clean.
Specification:Type: VAC9010H
Optional Current: 100A/200A/300A/500A
Screen resolution: 0.1A
Voltage measurement range: Own power supply 12-90V ; External power supply 0-90V
Current accuracy: ±3% ±5 word
Accuracy voltage: ±2% ±5 word
Screen resolution tension: 0.01V
Screen resolution capacity: 0.1AH
Screen resolution time: 0.01H(1 min)
Measurement rate: 5 times/ second
Type of protection and define(OVP): 0.01V-90V
Type of protection and define(OPP): 0.01W-9.99KW
Type of protection and define(LOP): 0.01V-90V
Type of protection and define(OCP): 0.1-100A
Type of protection and define(OAH): 0.01AH-9999AH
Type of protection and define(OFT): 1min-99hour59min
Size: approx. 79x43x26mm(3.11x1.69x1.02in)
Installation opening: 76.5x39.2mm
Color: As pictures shown.
Quantity: 1 pc
Note:Transition: 1cm=10mm=0.39inch
No retail package.
Please allow 1-3cm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes:1 set x Hall Coulombmeter(other accessories demo in the picture is not included.)
Preview:

Description:
Description:Ac9010h voltage meter is a type of new physical current voltage that can measure voltage, current, charge and discharge capacity, time and energy, etc. Meanwhile, it can also set the parameter to achieve overvoltage protection, over loading capacity, and limit protection, etc. Vac9010h use the non-contact detection of the hall to check the current, which can safely detect the current and use it convenient. Measured data and instrument used color lcd to display. The information will be comprehensive and humane. The meter is very suitable for monitoring the output voltage and current, as well as battery charging and discharging and other applications.
Features:100% brand new and high quality
For the user to charge and discharge can be automatic identification and bidirectional current direction, no need to change the direction of the wiring.
Aafter turning off the memory function, turning off the ah number, it is convenient for people to observe and measure.
AH number and current reset function, do not affect the next measurement.
Voltage, current, charging capacity ah, wh, time, energy will show at the same time, too, shou all information clearly.
With the output and off function, flexible cab to open or disconnect the output (relay need).
With over voltage, over current, over power, litmited time, load protection function, etc.
Can calibrate online, give a convenience for the customer to correct the error in time.
LCD panel can be manually put out or less than 300m automatically screen out in one minute.
By detecting the current sensor of the hall, the current through the round hole of the thr wire through the thr sensor, both the current of the side direction can be detected. It is safe and convenient for users.
Applicable scope: charge monitoring and discharge of electric vehicle battery, photovoltaic electricity monitoring system and so on, the first current empty charge charging needs to clean.
Specification:Type: VAC9010H
Optional Current: 100A/200A/300A/500A
Screen resolution: 0.1A
Voltage measurement range: Own power supply 12-90V ; External power supply 0-90V
Current accuracy: ±3% ±5 word
Accuracy voltage: ±2% ±5 word
Screen resolution tension: 0.01V
Screen resolution capacity: 0.1AH
Screen resolution time: 0.01H(1 min)
Measurement rate: 5 times/ second
Type of protection and define(OVP): 0.01V-90V
Type of protection and define(OPP): 0.01W-9.99KW
Type of protection and define(LOP): 0.01V-90V
Type of protection and define(OCP): 0.1-100A
Type of protection and define(OAH): 0.01AH-9999AH
Type of protection and define(OFT): 1min-99hour59min
Size: approx. 79x43x26mm(3.11x1.69x1.02in)
Installation opening: 76.5x39.2mm
Color: As pictures shown.
Quantity: 1 pc
Note:Transition: 1cm=10mm=0.39inch
No retail package.
Please allow 1-3cm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes:1 set x Hall Coulombmeter(other accessories demo in the picture is not included.)
Preview:

500Pcs 304 Stainless Steel Flat Washer Plain Washer Gaskets Assortment Kit M1.6 M2 M2.5 M3 M3.5 M4 M5
Descriptions:
Quantity: 500Pcs
Material: 304 Stainless Steel
Model: M1.6/M2/M2.5/M3/M3.5/M4/M5
Color: As the pictures show
Type Size Quantity
DIN125 M 1.6 x 4 x 0.3 100
DIN125 M 2 x 5 x 0.3 100
DIN125 M 2.5 x 6 x 0.5 100
DIN125 M 3 x 7 x 0.5 100
DIN125 M 4 x 9 x 0.8 50
DIN125 M 5 x 10 x 1.0 50
Usage:
Suitable for connection of machine,home decoration, automobile
Packing Included:
500Pcs x M1.6-M5 304 Stainless Steel Flat Washer Kit

pecification:
Heat resistance, water, conductive, anti interference effect, radiation protection, etc
Color:Silver(as picture shows)
Used in pipes and other applicable to refrigeration, such as indoor air conditioning pipe, refrigerator, water heater, the roof waterproof, temporary sealing pipe, heat pipe coating, BGA computer main board PCB welding heat insulation, flue seal, automobile air conditioners, heat insulation, stone cotton, the car's exhaust bare motorcycle exhaust pipe, automobile air conditioners, automobile engine, ambry sealing, thermal insulation,etc.
Aluminum foil tape is processed with pure aluminum and adhesives ,the metal has good strength and extensibility.
Package including:1 x Aluminium Foil Adhesive Tape

190pcs package include
M3 * 45 pcs
M4 * 40 pcs
M5 * 40 pcs
M6 * 30 pcs
M8 * 20 pcs
M10  * 15 pcs
93pcs package include
M3 * 25 pcs
M4 * 20 pcs
M5 * 15 pcs
M6 * 15 pcs
M8 * 9 pcs
M10  * 9 pcs
93pcs package include
M3 * 15 pcs
M4 * 15 pcs
M5 * 10 pcs
M6 * 30 pcs
M8 * 10 pcs
M10  * 30 pcs
Specification:
Name : Blind Rivet Nuts M3 M4 M5 M6 M8 M10  
Material : Aluminum
Quantity:190/165/93/90pcs
Wholesale : Support
Features:
1. Strict production standards, industrial quality, High quality galvanized aluminum rivet nut kit, durable.
2.F type (flat head), round head knurled (increased torsion strength) design, increase product life.
3. Reusable, easy to store and organize box packaging, easy to access and not easy to lose accessories.
4. A variety of applicable materials, rivet nuts can be installed in a variety of different materials including steel, plastic and fiberglass.
5. A wide range of applications, suitable for automobiles, furniture, decorations and other electrical appliances and industrial products.
6.With a wide audience, this combination kit is an ideal choice for businessmen, engineers, farmers, contractors, builders and other personnel, and is a perfect complement to all workshops.
Note: 
1.Please allow 1-3mm errors due to manual measurement. 
2.Due to light and screen setting difference, item's color may be slightly different from the pictures. Please understand.

190pcs package include
M3 * 45 pcs
M4 * 40 pcs
M5 * 40 pcs
M6 * 30 pcs
M8 * 20 pcs
M10  * 15 pcs
93pcs package include
M3 * 25 pcs
M4 * 20 pcs
M5 * 15 pcs
M6 * 15 pcs
M8 * 9 pcs
M10  * 9 pcs
93pcs package include
M3 * 15 pcs
M4 * 15 pcs
M5 * 10 pcs
M6 * 30 pcs
M8 * 10 pcs
M10  * 30 pcs
Specification:
Name : Blind Rivet Nuts M3 M4 M5 M6 M8 M10  
Material : Aluminum
Quantity:190/165/93/90pcs
Wholesale : Support
Features:
1. Strict production standards, industrial quality, High quality galvanized aluminum rivet nut kit, durable.
2.F type (flat head), round head knurled (increased torsion strength) design, increase product life.
3. Reusable, easy to store and organize box packaging, easy to access and not easy to lose accessories.
4. A variety of applicable materials, rivet nuts can be installed in a variety of different materials including steel, plastic and fiberglass.
5. A wide range of applications, suitable for automobiles, furniture, decorations and other electrical appliances and industrial products.
6.With a wide audience, this combination kit is an ideal choice for businessmen, engineers, farmers, contractors, builders and other personnel, and is a perfect complement to all workshops.
Note: 
1.Please allow 1-3mm errors due to manual measurement. 
2.Due to light and screen setting difference, item's color may be slightly different from the pictures. Please understand.

190pcs package include
M3 * 45 pcs
M4 * 40 pcs
M5 * 40 pcs
M6 * 30 pcs
M8 * 20 pcs
M10  * 15 pcs
93pcs package include
M3 * 25 pcs
M4 * 20 pcs
M5 * 15 pcs
M6 * 15 pcs
M8 * 9 pcs
M10  * 9 pcs
93pcs package include
M3 * 15 pcs
M4 * 15 pcs
M5 * 10 pcs
M6 * 30 pcs
M8 * 10 pcs
M10  * 30 pcs
Specification:
Name : Blind Rivet Nuts M3 M4 M5 M6 M8 M10  
Material : Aluminum
Quantity:190/165/93/90pcs
Wholesale : Support
Features:
1. Strict production standards, industrial quality, High quality galvanized aluminum rivet nut kit, durable.
2.F type (flat head), round head knurled (increased torsion strength) design, increase product life.
3. Reusable, easy to store and organize box packaging, easy to access and not easy to lose accessories.
4. A variety of applicable materials, rivet nuts can be installed in a variety of different materials including steel, plastic and fiberglass.
5. A wide range of applications, suitable for automobiles, furniture, decorations and other electrical appliances and industrial products.
6.With a wide audience, this combination kit is an ideal choice for businessmen, engineers, farmers, contractors, builders and other personnel, and is a perfect complement to all workshops.
Note: 
1.Please allow 1-3mm errors due to manual measurement. 
2.Due to light and screen setting difference, item's color may be slightly different from the pictures. Please understand.

190pcs package include
M3 * 45 pcs
M4 * 40 pcs
M5 * 40 pcs
M6 * 30 pcs
M8 * 20 pcs
M10  * 15 pcs
93pcs package include
M3 * 25 pcs
M4 * 20 pcs
M5 * 15 pcs
M6 * 15 pcs
M8 * 9 pcs
M10  * 9 pcs
93pcs package include
M3 * 15 pcs
M4 * 15 pcs
M5 * 10 pcs
M6 * 30 pcs
M8 * 10 pcs
M10  * 30 pcs
Specification:
Name : Blind Rivet Nuts M3 M4 M5 M6 M8 M10  
Material : Aluminum
Quantity:190/165/93/90pcs
Wholesale : Support
Features:
1. Strict production standards, industrial quality, High quality galvanized aluminum rivet nut kit, durable.
2.F type (flat head), round head knurled (increased torsion strength) design, increase product life.
3. Reusable, easy to store and organize box packaging, easy to access and not easy to lose accessories.
4. A variety of applicable materials, rivet nuts can be installed in a variety of different materials including steel, plastic and fiberglass.
5. A wide range of applications, suitable for automobiles, furniture, decorations and other electrical appliances and industrial products.
6.With a wide audience, this combination kit is an ideal choice for businessmen, engineers, farmers, contractors, builders and other personnel, and is a perfect complement to all workshops.
Note: 
1.Please allow 1-3mm errors due to manual measurement. 
2.Due to light and screen setting difference, item's color may be slightly different from the pictures. Please understand.

 
Specifications:
* Color: As shown
* Quantity: 
* Material: copper PVC tinplate
* Red: Suitable for cable / wire sizes (0.5-1.5mm² 22-18 AWG)
* Blue: Suitable for cable / wire sizes (1.5-2.5mm² 16-14 AWG)
* Yellow: Suitable for cable / wire sizes (4.0-6.0 mm² 12-10 AWG)
* Maximum current: red (10A), blue (15A), yellow (24A)
* Max. Operating temperature: 75 ° C / 167 ° F.

 
Specifications:
* Color: As shown
* Quantity: 
* Material: copper PVC tinplate
* Red: Suitable for cable / wire sizes (0.5-1.5mm² 22-18 AWG)
* Blue: Suitable for cable / wire sizes (1.5-2.5mm² 16-14 AWG)
* Yellow: Suitable for cable / wire sizes (4.0-6.0 mm² 12-10 AWG)
* Maximum current: red (10A), blue (15A), yellow (24A)
* Max. Operating temperature: 75 ° C / 167 ° F.

 
Specifications:
* Color: As shown
* Quantity: 
* Material: copper PVC tinplate
* Red: Suitable for cable / wire sizes (0.5-1.5mm² 22-18 AWG)
* Blue: Suitable for cable / wire sizes (1.5-2.5mm² 16-14 AWG)
* Yellow: Suitable for cable / wire sizes (4.0-6.0 mm² 12-10 AWG)
* Maximum current: red (10A), blue (15A), yellow (24A)
* Max. Operating temperature: 75 ° C / 167 ° F.

 
Specifications:
* Color: As shown
* Quantity: 
* Material: copper PVC tinplate
* Red: Suitable for cable / wire sizes (0.5-1.5mm² 22-18 AWG)
* Blue: Suitable for cable / wire sizes (1.5-2.5mm² 16-14 AWG)
* Yellow: Suitable for cable / wire sizes (4.0-6.0 mm² 12-10 AWG)
* Maximum current: red (10A), blue (15A), yellow (24A)
* Max. Operating temperature: 75 ° C / 167 ° F.

 
Specifications:
* Color: As shown
* Quantity: 
* Material: copper PVC tinplate
* Red: Suitable for cable / wire sizes (0.5-1.5mm² 22-18 AWG)
* Blue: Suitable for cable / wire sizes (1.5-2.5mm² 16-14 AWG)
* Yellow: Suitable for cable / wire sizes (4.0-6.0 mm² 12-10 AWG)
* Maximum current: red (10A), blue (15A), yellow (24A)
* Max. Operating temperature: 75 ° C / 167 ° F.

 
Specifications:
* Color: As shown
* Quantity: 
* Material: copper PVC tinplate
* Red: Suitable for cable / wire sizes (0.5-1.5mm² 22-18 AWG)
* Blue: Suitable for cable / wire sizes (1.5-2.5mm² 16-14 AWG)
* Yellow: Suitable for cable / wire sizes (4.0-6.0 mm² 12-10 AWG)
* Maximum current: red (10A), blue (15A), yellow (24A)
* Max. Operating temperature: 75 ° C / 167 ° F.