Egyéb elektromos berendezések és kellékek

 
 
IIC I2C Logic Level Converter Bi-Directional Board Module 5V/3.3V DC For Arduino With Pins
 
 
 
Description
If you\'ve ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and 1.8V devices. What really separates this Logic level converter from our previous versions is that you can successfully set your high and low voltages and step up and down between them safely on the same channel. Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side.
The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the HV\' pin, low voltage (3.3V for example) to LV\', and ground from the system to the GND\' pin.
Dimensions:0.63 x 0.52" (16.05 x 13.33mm)
Documents:
Schematic
Eagle Files
Datasheet (BSS138)
Hookup Guide
GitHub
Product Video
 
Package Included
1 Pcs IIC I2C Logic Level Converter Bi-Directional Board Module
 
 
 

 
5V700mA (3.5W) 9V500mA 12V450mA 5W Isolated Switch Power Supply Module AC-DC Buck Step-down Module
 

 
Description:
The power supply has a temperature protection, overcurrent protection and short circuit protection, AC90 ~ 240V wide voltage input, the input and output isolation. DC3.3V 5V 9V 12V output voltage, compact, with light.
Input voltage: AC 90 ~ 240v 50 / 60HZ
Output voltage: DC3.3V600mA / 5V700mA / 9V500mA / 12V450mA (± 0.1V) 
Volume: 30 * 20 * 18 (mm)
 
Package Included:
1 Pcs AC-DC Power Module
 

 
5V700mA (3.5W) 9V500mA 12V450mA 5W Isolated Switch Power Supply Module AC-DC Buck Step-down Module
 

 
Description:
The power supply has a temperature protection, overcurrent protection and short circuit protection, AC90 ~ 240V wide voltage input, the input and output isolation. DC3.3V 5V 9V 12V output voltage, compact, with light.
Input voltage: AC 90 ~ 240v 50 / 60HZ
Output voltage: DC3.3V600mA / 5V700mA / 9V500mA / 12V450mA (± 0.1V) 
Volume: 30 * 20 * 18 (mm)
 
Package Included:
1 Pcs AC-DC Power Module
 

 
5V700mA (3.5W) 9V500mA 12V450mA 5W Isolated Switch Power Supply Module AC-DC Buck Step-down Module
 

 
Description:
The power supply has a temperature protection, overcurrent protection and short circuit protection, AC90 ~ 240V wide voltage input, the input and output isolation. DC3.3V 5V 9V 12V output voltage, compact, with light.
Input voltage: AC 90 ~ 240v 50 / 60HZ
Output voltage: DC3.3V600mA / 5V700mA / 9V500mA / 12V450mA (± 0.1V) 
Volume: 30 * 20 * 18 (mm)
 
Package Included:
1 Pcs AC-DC Power Module
 

 
5V700mA (3.5W) 9V500mA 12V450mA 5W Isolated Switch Power Supply Module AC-DC Buck Step-down Module
 

 
Description:
The power supply has a temperature protection, overcurrent protection and short circuit protection, AC90 ~ 240V wide voltage input, the input and output isolation. DC3.3V 5V 9V 12V output voltage, compact, with light.
Input voltage: AC 90 ~ 240v 50 / 60HZ
Output voltage: DC3.3V600mA / 5V700mA / 9V500mA / 12V450mA (± 0.1V) 
Volume: 30 * 20 * 18 (mm)
 
Package Included:
1 Pcs AC-DC Power Module
 

 
5V700mA (3.5W) 9V500mA 12V450mA 5W Isolated Switch Power Supply Module AC-DC Buck Step-down Module
 

 
Description:
The power supply has a temperature protection, overcurrent protection and short circuit protection, AC90 ~ 240V wide voltage input, the input and output isolation. DC3.3V 5V 9V 12V output voltage, compact, with light.
Input voltage: AC 90 ~ 240v 50 / 60HZ
Output voltage: DC3.3V600mA / 5V700mA / 9V500mA / 12V450mA (± 0.1V) 
Volume: 30 * 20 * 18 (mm)
 
Package Included:
1 Pcs AC-DC Power Module
 

TP4056 Type-c USB 5V 1A 18650 Lithium Battery Charger Module Charging Board With Protection Dual Functions 1A Li-ion

Description
Module performance:
The input voltage: 4.35-6 v (recommended voltage 5 v)
Charge cut-off voltage: 4.2 V / - 1%
Maximum charging current output: 1000 ma
The battery overcharge protection voltage: 4.28 V
Battery overcharge lifting voltage: 4.00 V
The battery discharge protection voltage: 3.0 V
Battery discharge termination voltage: 3.2 V
Battery: over-current protection current 3 a
The board size: about 2.5 * 1.65 CM
Light state: no load the light not bright, red light for recharging, is full of green light.
Package Included
1 Pcs TP4056 Type-c USB 5V 1A 18650 Lithium Battery Charger Module

 
CH340G CP2104 USB To ESP8266 ESP-01 ESP-01S WIFI Module Programmer Adapter Download Debug Link Kit for Arduino LINK V1.0 CH9102F
 
 
Description
Breadboard Adapter:
This is a breadboard adapter for the popular ESP-01 model of the ESP8266 serial-to-WiFi transceiver module.
As ESP-01 Pin arrangements are not breadboard friendly and are not labeled, which makes it little inconvenient for rapid prototyping.This breadboard adapter will help you to make
prototyping with esp-01 module much more easier.
This breakout conveniently offers clear pinout silkprint on top and will nicely fit your prefered breadboard.
Connection:
URAT        Adapter
3.3V           VCC
3.3V           CH-PD
TX               RX
RX              TX
Choose both NL CR 15200 baud rate
CP2104 Adapter:
This download uses CP2104 USB serial chip, and adds ESP8266 automatically download circuit, very user to Shun be the ESP-01 / 01S download programs, firmware upgrade, the serial debug, and support Arduino IDE, Shun can ESP8266Flasher and FLASH_DOWNLOAD_TOOLS etc. Download software software a key to download, no wiring, no need to press any buttons. WiFi module will automatically go into download mode.
CH340 With Switch:
The DOWNLOAD device uses CH340CUSB transfer to serial port chip, and adds an automatic DOWNLOAD circuit for ESP8266, which is very convenient for users to DOWNLOAD programs, upgrade firmware, and serial port debugging, etc. It supports Arduino IDE, ESP8266 Flasher, And Joyin Flash-Download-Tools, etc. It doesn't need to connect wires or press any buttons. The WiFi module will automatically enter the download mode.
ESP-01:
1. Low price and little profit. I hope this will lead to the rapid development of animal networking.
2 Powerful Internal Running LWIP Protocol
3 Supports three modes: AP, STA, AP STA coexistence mode
4. Perfect, concise and efficient AT instructions to make your development easier.
The Main Parameters:
Wireless standard: 802.11 b / g / n
Frequency range: 2.4GHz~2.5GHz(2400M ~ 2483.5M)
Data interface: UART / HSPI / I2C / I2S / IR Remote Contorl / GPIO / PWM
Operating voltage: 3.0 ~ 3.6v (Suggest 3.3v)
Working current: average 80mA
Operating temperature: - 40 degrees to 125 degrees
Storage temperature: room temperature
External interface: N / A
Wireless network mode: station / softAP / SoftAP station
Security mechanisms: WPA / WPA2
Encryption type: WEP / TKIP / AES
Upgrade firmware: local serial port burn, cloud upgrade, host download burn
Software development: support customer custom server, provide SDK to customer secondary development
Network protocols: IPV4, TCP / UDP / HTTP / FTP
User Configuration: AT instruction set, cloud server, Android / IOS APP
ESP-01S:
Wireless Standard:802.11b/g/n
Frequency Range:2.4GHz-2.5GHz(2400M-2483.5M)
Data Interface:UART/HSPI/I2C/I2S/Ir Remote Control/GPIO/PWM
Operating Voltage:3.0-3.6V(We recommended 3.3V)
Operating Current:Average 80mA
Operating Temperature:-40~125°
Wireless Network Mode:station/softAP/SoftAP station
Safety Mode:WPA/WPA2
Encryption Type:WEP/TKIP/AES
Network Protocol:IPV4,TCP/UDP/HTTP/FTP.
CH340 Adapter:
This moduel is an USB adpater
programmer for ESP8266 moduels of type ESP-01.
It is conveniently fitted with a 2x4P
2.54mm female header to plug the ESP01
(according to illustration picture 2)
and configure or run it right away.
A large 1000μF cap will help getting a steady 5.0V VCC
from the USb bus and and jumper (on the right of the 2x4P header)(we don't offer any jumper !!!!)
will help configuring the GPIO0 line according needs.
The module is based on the USB-UART bridget CH340
from WCH which is compatible with all platforms.
Note : for an usage with rduino ESP8266 platform and for rduino IDE
it is necessary to switch manually the GPIO0 state for working mode,
in order to get a fully automatic upload it is most likely possible,
for a very limited effort, to assign an unused control line
from CH340 to driver the GPIO0 line
(probably at the cost of a necessary logic inversion),
refer to the CH340 datasheet and
most important to the NodeMCU V0.9
which use the CH340 and already implements this solution,
the schematic is open source and easily available.
 
Package Included
1 Pcs ESP Module
 

 
CH340G CP2104 USB To ESP8266 ESP-01 ESP-01S WIFI Module Programmer Adapter Download Debug Link Kit for Arduino LINK V1.0 CH9102F
 
 
Description
Breadboard Adapter:
This is a breadboard adapter for the popular ESP-01 model of the ESP8266 serial-to-WiFi transceiver module.
As ESP-01 Pin arrangements are not breadboard friendly and are not labeled, which makes it little inconvenient for rapid prototyping.This breadboard adapter will help you to make
prototyping with esp-01 module much more easier.
This breakout conveniently offers clear pinout silkprint on top and will nicely fit your prefered breadboard.
Connection:
URAT        Adapter
3.3V           VCC
3.3V           CH-PD
TX               RX
RX              TX
Choose both NL CR 15200 baud rate
CP2104 Adapter:
This download uses CP2104 USB serial chip, and adds ESP8266 automatically download circuit, very user to Shun be the ESP-01 / 01S download programs, firmware upgrade, the serial debug, and support Arduino IDE, Shun can ESP8266Flasher and FLASH_DOWNLOAD_TOOLS etc. Download software software a key to download, no wiring, no need to press any buttons. WiFi module will automatically go into download mode.
CH340 With Switch:
The DOWNLOAD device uses CH340CUSB transfer to serial port chip, and adds an automatic DOWNLOAD circuit for ESP8266, which is very convenient for users to DOWNLOAD programs, upgrade firmware, and serial port debugging, etc. It supports Arduino IDE, ESP8266 Flasher, And Joyin Flash-Download-Tools, etc. It doesn't need to connect wires or press any buttons. The WiFi module will automatically enter the download mode.
ESP-01:
1. Low price and little profit. I hope this will lead to the rapid development of animal networking.
2 Powerful Internal Running LWIP Protocol
3 Supports three modes: AP, STA, AP STA coexistence mode
4. Perfect, concise and efficient AT instructions to make your development easier.
The Main Parameters:
Wireless standard: 802.11 b / g / n
Frequency range: 2.4GHz~2.5GHz(2400M ~ 2483.5M)
Data interface: UART / HSPI / I2C / I2S / IR Remote Contorl / GPIO / PWM
Operating voltage: 3.0 ~ 3.6v (Suggest 3.3v)
Working current: average 80mA
Operating temperature: - 40 degrees to 125 degrees
Storage temperature: room temperature
External interface: N / A
Wireless network mode: station / softAP / SoftAP station
Security mechanisms: WPA / WPA2
Encryption type: WEP / TKIP / AES
Upgrade firmware: local serial port burn, cloud upgrade, host download burn
Software development: support customer custom server, provide SDK to customer secondary development
Network protocols: IPV4, TCP / UDP / HTTP / FTP
User Configuration: AT instruction set, cloud server, Android / IOS APP
ESP-01S:
Wireless Standard:802.11b/g/n
Frequency Range:2.4GHz-2.5GHz(2400M-2483.5M)
Data Interface:UART/HSPI/I2C/I2S/Ir Remote Control/GPIO/PWM
Operating Voltage:3.0-3.6V(We recommended 3.3V)
Operating Current:Average 80mA
Operating Temperature:-40~125°
Wireless Network Mode:station/softAP/SoftAP station
Safety Mode:WPA/WPA2
Encryption Type:WEP/TKIP/AES
Network Protocol:IPV4,TCP/UDP/HTTP/FTP.
CH340 Adapter:
This moduel is an USB adpater
programmer for ESP8266 moduels of type ESP-01.
It is conveniently fitted with a 2x4P
2.54mm female header to plug the ESP01
(according to illustration picture 2)
and configure or run it right away.
A large 1000μF cap will help getting a steady 5.0V VCC
from the USb bus and and jumper (on the right of the 2x4P header)(we don't offer any jumper !!!!)
will help configuring the GPIO0 line according needs.
The module is based on the USB-UART bridget CH340
from WCH which is compatible with all platforms.
Note : for an usage with rduino ESP8266 platform and for rduino IDE
it is necessary to switch manually the GPIO0 state for working mode,
in order to get a fully automatic upload it is most likely possible,
for a very limited effort, to assign an unused control line
from CH340 to driver the GPIO0 line
(probably at the cost of a necessary logic inversion),
refer to the CH340 datasheet and
most important to the NodeMCU V0.9
which use the CH340 and already implements this solution,
the schematic is open source and easily available.
 
Package Included
1 Pcs ESP Module
 

 
CH340G CP2104 USB To ESP8266 ESP-01 ESP-01S WIFI Module Programmer Adapter Download Debug Link Kit for Arduino LINK V1.0 CH9102F
 
 
Description
Breadboard Adapter:
This is a breadboard adapter for the popular ESP-01 model of the ESP8266 serial-to-WiFi transceiver module.
As ESP-01 Pin arrangements are not breadboard friendly and are not labeled, which makes it little inconvenient for rapid prototyping.This breadboard adapter will help you to make
prototyping with esp-01 module much more easier.
This breakout conveniently offers clear pinout silkprint on top and will nicely fit your prefered breadboard.
Connection:
URAT        Adapter
3.3V           VCC
3.3V           CH-PD
TX               RX
RX              TX
Choose both NL CR 15200 baud rate
CP2104 Adapter:
This download uses CP2104 USB serial chip, and adds ESP8266 automatically download circuit, very user to Shun be the ESP-01 / 01S download programs, firmware upgrade, the serial debug, and support Arduino IDE, Shun can ESP8266Flasher and FLASH_DOWNLOAD_TOOLS etc. Download software software a key to download, no wiring, no need to press any buttons. WiFi module will automatically go into download mode.
CH340 With Switch:
The DOWNLOAD device uses CH340CUSB transfer to serial port chip, and adds an automatic DOWNLOAD circuit for ESP8266, which is very convenient for users to DOWNLOAD programs, upgrade firmware, and serial port debugging, etc. It supports Arduino IDE, ESP8266 Flasher, And Joyin Flash-Download-Tools, etc. It doesn't need to connect wires or press any buttons. The WiFi module will automatically enter the download mode.
ESP-01:
1. Low price and little profit. I hope this will lead to the rapid development of animal networking.
2 Powerful Internal Running LWIP Protocol
3 Supports three modes: AP, STA, AP STA coexistence mode
4. Perfect, concise and efficient AT instructions to make your development easier.
The Main Parameters:
Wireless standard: 802.11 b / g / n
Frequency range: 2.4GHz~2.5GHz(2400M ~ 2483.5M)
Data interface: UART / HSPI / I2C / I2S / IR Remote Contorl / GPIO / PWM
Operating voltage: 3.0 ~ 3.6v (Suggest 3.3v)
Working current: average 80mA
Operating temperature: - 40 degrees to 125 degrees
Storage temperature: room temperature
External interface: N / A
Wireless network mode: station / softAP / SoftAP station
Security mechanisms: WPA / WPA2
Encryption type: WEP / TKIP / AES
Upgrade firmware: local serial port burn, cloud upgrade, host download burn
Software development: support customer custom server, provide SDK to customer secondary development
Network protocols: IPV4, TCP / UDP / HTTP / FTP
User Configuration: AT instruction set, cloud server, Android / IOS APP
ESP-01S:
Wireless Standard:802.11b/g/n
Frequency Range:2.4GHz-2.5GHz(2400M-2483.5M)
Data Interface:UART/HSPI/I2C/I2S/Ir Remote Control/GPIO/PWM
Operating Voltage:3.0-3.6V(We recommended 3.3V)
Operating Current:Average 80mA
Operating Temperature:-40~125°
Wireless Network Mode:station/softAP/SoftAP station
Safety Mode:WPA/WPA2
Encryption Type:WEP/TKIP/AES
Network Protocol:IPV4,TCP/UDP/HTTP/FTP.
CH340 Adapter:
This moduel is an USB adpater
programmer for ESP8266 moduels of type ESP-01.
It is conveniently fitted with a 2x4P
2.54mm female header to plug the ESP01
(according to illustration picture 2)
and configure or run it right away.
A large 1000μF cap will help getting a steady 5.0V VCC
from the USb bus and and jumper (on the right of the 2x4P header)(we don't offer any jumper !!!!)
will help configuring the GPIO0 line according needs.
The module is based on the USB-UART bridget CH340
from WCH which is compatible with all platforms.
Note : for an usage with rduino ESP8266 platform and for rduino IDE
it is necessary to switch manually the GPIO0 state for working mode,
in order to get a fully automatic upload it is most likely possible,
for a very limited effort, to assign an unused control line
from CH340 to driver the GPIO0 line
(probably at the cost of a necessary logic inversion),
refer to the CH340 datasheet and
most important to the NodeMCU V0.9
which use the CH340 and already implements this solution,
the schematic is open source and easily available.
 
Package Included
1 Pcs ESP Module
 

 
CH340G CP2104 USB To ESP8266 ESP-01 ESP-01S WIFI Module Programmer Adapter Download Debug Link Kit for Arduino LINK V1.0 CH9102F
 
 
Description
Breadboard Adapter:
This is a breadboard adapter for the popular ESP-01 model of the ESP8266 serial-to-WiFi transceiver module.
As ESP-01 Pin arrangements are not breadboard friendly and are not labeled, which makes it little inconvenient for rapid prototyping.This breadboard adapter will help you to make
prototyping with esp-01 module much more easier.
This breakout conveniently offers clear pinout silkprint on top and will nicely fit your prefered breadboard.
Connection:
URAT        Adapter
3.3V           VCC
3.3V           CH-PD
TX               RX
RX              TX
Choose both NL CR 15200 baud rate
CP2104 Adapter:
This download uses CP2104 USB serial chip, and adds ESP8266 automatically download circuit, very user to Shun be the ESP-01 / 01S download programs, firmware upgrade, the serial debug, and support Arduino IDE, Shun can ESP8266Flasher and FLASH_DOWNLOAD_TOOLS etc. Download software software a key to download, no wiring, no need to press any buttons. WiFi module will automatically go into download mode.
CH340 With Switch:
The DOWNLOAD device uses CH340CUSB transfer to serial port chip, and adds an automatic DOWNLOAD circuit for ESP8266, which is very convenient for users to DOWNLOAD programs, upgrade firmware, and serial port debugging, etc. It supports Arduino IDE, ESP8266 Flasher, And Joyin Flash-Download-Tools, etc. It doesn't need to connect wires or press any buttons. The WiFi module will automatically enter the download mode.
ESP-01:
1. Low price and little profit. I hope this will lead to the rapid development of animal networking.
2 Powerful Internal Running LWIP Protocol
3 Supports three modes: AP, STA, AP STA coexistence mode
4. Perfect, concise and efficient AT instructions to make your development easier.
The Main Parameters:
Wireless standard: 802.11 b / g / n
Frequency range: 2.4GHz~2.5GHz(2400M ~ 2483.5M)
Data interface: UART / HSPI / I2C / I2S / IR Remote Contorl / GPIO / PWM
Operating voltage: 3.0 ~ 3.6v (Suggest 3.3v)
Working current: average 80mA
Operating temperature: - 40 degrees to 125 degrees
Storage temperature: room temperature
External interface: N / A
Wireless network mode: station / softAP / SoftAP station
Security mechanisms: WPA / WPA2
Encryption type: WEP / TKIP / AES
Upgrade firmware: local serial port burn, cloud upgrade, host download burn
Software development: support customer custom server, provide SDK to customer secondary development
Network protocols: IPV4, TCP / UDP / HTTP / FTP
User Configuration: AT instruction set, cloud server, Android / IOS APP
ESP-01S:
Wireless Standard:802.11b/g/n
Frequency Range:2.4GHz-2.5GHz(2400M-2483.5M)
Data Interface:UART/HSPI/I2C/I2S/Ir Remote Control/GPIO/PWM
Operating Voltage:3.0-3.6V(We recommended 3.3V)
Operating Current:Average 80mA
Operating Temperature:-40~125°
Wireless Network Mode:station/softAP/SoftAP station
Safety Mode:WPA/WPA2
Encryption Type:WEP/TKIP/AES
Network Protocol:IPV4,TCP/UDP/HTTP/FTP.
CH340 Adapter:
This moduel is an USB adpater
programmer for ESP8266 moduels of type ESP-01.
It is conveniently fitted with a 2x4P
2.54mm female header to plug the ESP01
(according to illustration picture 2)
and configure or run it right away.
A large 1000μF cap will help getting a steady 5.0V VCC
from the USb bus and and jumper (on the right of the 2x4P header)(we don't offer any jumper !!!!)
will help configuring the GPIO0 line according needs.
The module is based on the USB-UART bridget CH340
from WCH which is compatible with all platforms.
Note : for an usage with rduino ESP8266 platform and for rduino IDE
it is necessary to switch manually the GPIO0 state for working mode,
in order to get a fully automatic upload it is most likely possible,
for a very limited effort, to assign an unused control line
from CH340 to driver the GPIO0 line
(probably at the cost of a necessary logic inversion),
refer to the CH340 datasheet and
most important to the NodeMCU V0.9
which use the CH340 and already implements this solution,
the schematic is open source and easily available.
 
Package Included
1 Pcs ESP Module
 

 
CH340G CP2104 USB To ESP8266 ESP-01 ESP-01S WIFI Module Programmer Adapter Download Debug Link Kit for Arduino LINK V1.0 CH9102F
 
 
Description
Breadboard Adapter:
This is a breadboard adapter for the popular ESP-01 model of the ESP8266 serial-to-WiFi transceiver module.
As ESP-01 Pin arrangements are not breadboard friendly and are not labeled, which makes it little inconvenient for rapid prototyping.This breadboard adapter will help you to make
prototyping with esp-01 module much more easier.
This breakout conveniently offers clear pinout silkprint on top and will nicely fit your prefered breadboard.
Connection:
URAT        Adapter
3.3V           VCC
3.3V           CH-PD
TX               RX
RX              TX
Choose both NL CR 15200 baud rate
CP2104 Adapter:
This download uses CP2104 USB serial chip, and adds ESP8266 automatically download circuit, very user to Shun be the ESP-01 / 01S download programs, firmware upgrade, the serial debug, and support Arduino IDE, Shun can ESP8266Flasher and FLASH_DOWNLOAD_TOOLS etc. Download software software a key to download, no wiring, no need to press any buttons. WiFi module will automatically go into download mode.
CH340 With Switch:
The DOWNLOAD device uses CH340CUSB transfer to serial port chip, and adds an automatic DOWNLOAD circuit for ESP8266, which is very convenient for users to DOWNLOAD programs, upgrade firmware, and serial port debugging, etc. It supports Arduino IDE, ESP8266 Flasher, And Joyin Flash-Download-Tools, etc. It doesn't need to connect wires or press any buttons. The WiFi module will automatically enter the download mode.
ESP-01:
1. Low price and little profit. I hope this will lead to the rapid development of animal networking.
2 Powerful Internal Running LWIP Protocol
3 Supports three modes: AP, STA, AP STA coexistence mode
4. Perfect, concise and efficient AT instructions to make your development easier.
The Main Parameters:
Wireless standard: 802.11 b / g / n
Frequency range: 2.4GHz~2.5GHz(2400M ~ 2483.5M)
Data interface: UART / HSPI / I2C / I2S / IR Remote Contorl / GPIO / PWM
Operating voltage: 3.0 ~ 3.6v (Suggest 3.3v)
Working current: average 80mA
Operating temperature: - 40 degrees to 125 degrees
Storage temperature: room temperature
External interface: N / A
Wireless network mode: station / softAP / SoftAP station
Security mechanisms: WPA / WPA2
Encryption type: WEP / TKIP / AES
Upgrade firmware: local serial port burn, cloud upgrade, host download burn
Software development: support customer custom server, provide SDK to customer secondary development
Network protocols: IPV4, TCP / UDP / HTTP / FTP
User Configuration: AT instruction set, cloud server, Android / IOS APP
ESP-01S:
Wireless Standard:802.11b/g/n
Frequency Range:2.4GHz-2.5GHz(2400M-2483.5M)
Data Interface:UART/HSPI/I2C/I2S/Ir Remote Control/GPIO/PWM
Operating Voltage:3.0-3.6V(We recommended 3.3V)
Operating Current:Average 80mA
Operating Temperature:-40~125°
Wireless Network Mode:station/softAP/SoftAP station
Safety Mode:WPA/WPA2
Encryption Type:WEP/TKIP/AES
Network Protocol:IPV4,TCP/UDP/HTTP/FTP.
CH340 Adapter:
This moduel is an USB adpater
programmer for ESP8266 moduels of type ESP-01.
It is conveniently fitted with a 2x4P
2.54mm female header to plug the ESP01
(according to illustration picture 2)
and configure or run it right away.
A large 1000μF cap will help getting a steady 5.0V VCC
from the USb bus and and jumper (on the right of the 2x4P header)(we don't offer any jumper !!!!)
will help configuring the GPIO0 line according needs.
The module is based on the USB-UART bridget CH340
from WCH which is compatible with all platforms.
Note : for an usage with rduino ESP8266 platform and for rduino IDE
it is necessary to switch manually the GPIO0 state for working mode,
in order to get a fully automatic upload it is most likely possible,
for a very limited effort, to assign an unused control line
from CH340 to driver the GPIO0 line
(probably at the cost of a necessary logic inversion),
refer to the CH340 datasheet and
most important to the NodeMCU V0.9
which use the CH340 and already implements this solution,
the schematic is open source and easily available.
 
Package Included
1 Pcs ESP Module
 

 
CH340G CP2104 USB To ESP8266 ESP-01 ESP-01S WIFI Module Programmer Adapter Download Debug Link Kit for Arduino LINK V1.0 CH9102F
 
 
Description
Breadboard Adapter:
This is a breadboard adapter for the popular ESP-01 model of the ESP8266 serial-to-WiFi transceiver module.
As ESP-01 Pin arrangements are not breadboard friendly and are not labeled, which makes it little inconvenient for rapid prototyping.This breadboard adapter will help you to make
prototyping with esp-01 module much more easier.
This breakout conveniently offers clear pinout silkprint on top and will nicely fit your prefered breadboard.
Connection:
URAT        Adapter
3.3V           VCC
3.3V           CH-PD
TX               RX
RX              TX
Choose both NL CR 15200 baud rate
CP2104 Adapter:
This download uses CP2104 USB serial chip, and adds ESP8266 automatically download circuit, very user to Shun be the ESP-01 / 01S download programs, firmware upgrade, the serial debug, and support Arduino IDE, Shun can ESP8266Flasher and FLASH_DOWNLOAD_TOOLS etc. Download software software a key to download, no wiring, no need to press any buttons. WiFi module will automatically go into download mode.
CH340 With Switch:
The DOWNLOAD device uses CH340CUSB transfer to serial port chip, and adds an automatic DOWNLOAD circuit for ESP8266, which is very convenient for users to DOWNLOAD programs, upgrade firmware, and serial port debugging, etc. It supports Arduino IDE, ESP8266 Flasher, And Joyin Flash-Download-Tools, etc. It doesn't need to connect wires or press any buttons. The WiFi module will automatically enter the download mode.
ESP-01:
1. Low price and little profit. I hope this will lead to the rapid development of animal networking.
2 Powerful Internal Running LWIP Protocol
3 Supports three modes: AP, STA, AP STA coexistence mode
4. Perfect, concise and efficient AT instructions to make your development easier.
The Main Parameters:
Wireless standard: 802.11 b / g / n
Frequency range: 2.4GHz~2.5GHz(2400M ~ 2483.5M)
Data interface: UART / HSPI / I2C / I2S / IR Remote Contorl / GPIO / PWM
Operating voltage: 3.0 ~ 3.6v (Suggest 3.3v)
Working current: average 80mA
Operating temperature: - 40 degrees to 125 degrees
Storage temperature: room temperature
External interface: N / A
Wireless network mode: station / softAP / SoftAP station
Security mechanisms: WPA / WPA2
Encryption type: WEP / TKIP / AES
Upgrade firmware: local serial port burn, cloud upgrade, host download burn
Software development: support customer custom server, provide SDK to customer secondary development
Network protocols: IPV4, TCP / UDP / HTTP / FTP
User Configuration: AT instruction set, cloud server, Android / IOS APP
ESP-01S:
Wireless Standard:802.11b/g/n
Frequency Range:2.4GHz-2.5GHz(2400M-2483.5M)
Data Interface:UART/HSPI/I2C/I2S/Ir Remote Control/GPIO/PWM
Operating Voltage:3.0-3.6V(We recommended 3.3V)
Operating Current:Average 80mA
Operating Temperature:-40~125°
Wireless Network Mode:station/softAP/SoftAP station
Safety Mode:WPA/WPA2
Encryption Type:WEP/TKIP/AES
Network Protocol:IPV4,TCP/UDP/HTTP/FTP.
CH340 Adapter:
This moduel is an USB adpater
programmer for ESP8266 moduels of type ESP-01.
It is conveniently fitted with a 2x4P
2.54mm female header to plug the ESP01
(according to illustration picture 2)
and configure or run it right away.
A large 1000μF cap will help getting a steady 5.0V VCC
from the USb bus and and jumper (on the right of the 2x4P header)(we don't offer any jumper !!!!)
will help configuring the GPIO0 line according needs.
The module is based on the USB-UART bridget CH340
from WCH which is compatible with all platforms.
Note : for an usage with rduino ESP8266 platform and for rduino IDE
it is necessary to switch manually the GPIO0 state for working mode,
in order to get a fully automatic upload it is most likely possible,
for a very limited effort, to assign an unused control line
from CH340 to driver the GPIO0 line
(probably at the cost of a necessary logic inversion),
refer to the CH340 datasheet and
most important to the NodeMCU V0.9
which use the CH340 and already implements this solution,
the schematic is open source and easily available.
 
Package Included
1 Pcs ESP Module
 

2S 3A 4A 5A 8A 10A 13A 20A 7.4V 8.4V Li-ion 18650 Lithium Battery Protection Board / BMS Board Standard / Balance
Description
Model:2S 5A
Overcharge voltage range:4.25-4.35V 0.05V
Size:17.5*17.5*3.2mm
Over discharge voltage range:2.5-3.0V 0.05V
Upper limit operating current:5A
Operating temperature:-40°C~ 50°C
Upper limit instantaneous current:7A
Storage conditions:-40°C~ 80°C
Quiescent current: less than IOuA
Effective life: more than 50.000 hours
Internal resistance: less than 300mΩ
Short circuit protection: can be protected, need to charge recovery
Charging voltage: 8.4V-9V
Welding point:
B connected to the battery positive;
B-connected battery negative;
MB connects the battery 1 to the connection point before the battery 2;
P corrected to the charge/ discharge side of the positive (charge side dischargeside shared);
P- connect/discharge terminal negative(shared with charge/discharge;
Model:2S 4A
1.High-precision voltage detection function for each battery;2.3 overcurrent detection function;
3.Through the MOS tube can control the battery charge and discharge;
4.Wide operating temperature range:-40°C~ 85°C;
5.Low current consumption;
1.Charging voltage:DC9V CC / CV ( MAX:12V )
2.Current
Single current consumption ( consumption ) ≤ 6UA
Maximum sustained discharge current:4A
3.Overcharge protection
Overcharge detection voltage:4.29V Accuracy ≤ ±0.025V
Overcharge detection delay time:1s
Overcharge recovery voltage:4.05V Accuracy ≤ ±0.025V
4.Over-discharge protection
Over-discharge detection voltage:3V Accuracy ≤ ±0.1V
Over-discharge detection delay time:128ms
Over discharge recovery voltage:3.2V Accuracy ≤ ±0.1V
5.Over-current protection
Overcurrent detection voltage:200mv
Overcurrent detection current:9.8A
Overcurrent delay time:12ms
Recovery Status:Auto Recovery
6.Short-circuit protection
Detection status external short circuit
Detection delay time:≤ 50us
Recovery Status:Auto Recovery
7.Internal resistance:protection circuit:( MOSPET )≤21mΩ
8.Temperature
Operating temperature range:-40°C~ 80°C
Storage temperature range:-40°C~ 125°C
Product size:about 3.50*1.70cm
Model:2S 8A
1.high-accuracy voltage detection circuit;
2.terminal of the charger using high voltage device;
3.Built-in three-stage over-current detection circuit ( over-current 1 , over-current 2 , or or load short circuit);
4.MOS transistor can control the battery charge and discharge;
5.low standby current consumption;
Parameter:
Over charge voltage : 4.25-4.35v ± 0.05v
Over dishcarge voltage : 2.5-3.0v ± 0.05v
Max continuous current : 8A
Max peak current : 15A
Working temperature : -40--- 50
Storage Temperature : -40-- 80
Small current : less than 3uA
Life cycle : more than 50000 hours
Resistance : Less than 300mΩ
Short cut protection : Protectable , charge can repair
Size : 41 * 16 * 3.5mm
B Connect battery positive;
B- Connect battery negative;
MB Connect the point between battery 1 & battery 2;
P Charge/discharge positive;
P- Charge/discharge negative;
Model:2S 10A
Overcharging range : 4.25-4.35V 0.05V
Size : 46.7 * 23 * 3.15mm
Over voltage range : 2.5-3.0V 0.05V
Maximum working current : 10A
Working temperature : -40°C- 50°C
Maximum instantaneous current : 20A
Storage conditions : -40°C- 80°C
Static current : less than 10uA
Effective life : more than 50000 hours
Resistance : less than 300 mΩ
Short circuit protection : to protect and restore must charge
Charging voltage : 8.4V-9V
The protection board size and device description;
The protective plate size is 46.7 * 23 * 3.15mm;
B battery anode;
B - connect battery negative terminal;
MB connect battery 1 to battery 2;
P charging / discharge correct poles ( charging end / discharge end sharing ) ;
P - charging / discharge terminal negative terminal ( charging end / discharge end sharing).
Model:2S 13A
This can not be used in lithium iron phosphate battery protection board , hernia lamp , hand electric drill battery , electric fish electromechanical Chizu , electric bicycle batteries , carbatteries , children ( 4 a ) more than 775 motor , fisheye 1 w LED lamp , used for thecombined purchase customers please note !
Overcharging range : 4.25-4.35V±0.05V
Size : 46 * 20 * 3.6 mm
Over voltage range : 2.5-3.0V ± 0.05V
Maximum working current : 13A
working temperature : -40- 50°C
Maximum instantaneous current : 20A
Storage conditions : -40- 80°C
Static current : less than 10uA
Effective life : more than 50000 hours
Resistance : less than 300 mΩ
Short circuit protection : to protect and restore must charge
Charging voltage : 8.4V-9V
The protection board size and device description ;
The protective plate size is 46 * 20 * 3.6 mm
B battery anode;
B - connect battery negative terminal;
MB connect battery 1 to battery 2
P charging / discharge correct poles (charging end / discharge end sharing);
P - charging / discharge terminal negative terminal (charging end / discharge end sharing);
 
Package Included
1 Pcs Battery Protection Board
 

2S 3A 4A 5A 8A 10A 13A 20A 7.4V 8.4V Li-ion 18650 Lithium Battery Protection Board / BMS Board Standard / Balance
Description
Model:2S 5A
Overcharge voltage range:4.25-4.35V 0.05V
Size:17.5*17.5*3.2mm
Over discharge voltage range:2.5-3.0V 0.05V
Upper limit operating current:5A
Operating temperature:-40°C~ 50°C
Upper limit instantaneous current:7A
Storage conditions:-40°C~ 80°C
Quiescent current: less than IOuA
Effective life: more than 50.000 hours
Internal resistance: less than 300mΩ
Short circuit protection: can be protected, need to charge recovery
Charging voltage: 8.4V-9V
Welding point:
B connected to the battery positive;
B-connected battery negative;
MB connects the battery 1 to the connection point before the battery 2;
P corrected to the charge/ discharge side of the positive (charge side dischargeside shared);
P- connect/discharge terminal negative(shared with charge/discharge;
Model:2S 4A
1.High-precision voltage detection function for each battery;2.3 overcurrent detection function;
3.Through the MOS tube can control the battery charge and discharge;
4.Wide operating temperature range:-40°C~ 85°C;
5.Low current consumption;
1.Charging voltage:DC9V CC / CV ( MAX:12V )
2.Current
Single current consumption ( consumption ) ≤ 6UA
Maximum sustained discharge current:4A
3.Overcharge protection
Overcharge detection voltage:4.29V Accuracy ≤ ±0.025V
Overcharge detection delay time:1s
Overcharge recovery voltage:4.05V Accuracy ≤ ±0.025V
4.Over-discharge protection
Over-discharge detection voltage:3V Accuracy ≤ ±0.1V
Over-discharge detection delay time:128ms
Over discharge recovery voltage:3.2V Accuracy ≤ ±0.1V
5.Over-current protection
Overcurrent detection voltage:200mv
Overcurrent detection current:9.8A
Overcurrent delay time:12ms
Recovery Status:Auto Recovery
6.Short-circuit protection
Detection status external short circuit
Detection delay time:≤ 50us
Recovery Status:Auto Recovery
7.Internal resistance:protection circuit:( MOSPET )≤21mΩ
8.Temperature
Operating temperature range:-40°C~ 80°C
Storage temperature range:-40°C~ 125°C
Product size:about 3.50*1.70cm
Model:2S 8A
1.high-accuracy voltage detection circuit;
2.terminal of the charger using high voltage device;
3.Built-in three-stage over-current detection circuit ( over-current 1 , over-current 2 , or or load short circuit);
4.MOS transistor can control the battery charge and discharge;
5.low standby current consumption;
Parameter:
Over charge voltage : 4.25-4.35v ± 0.05v
Over dishcarge voltage : 2.5-3.0v ± 0.05v
Max continuous current : 8A
Max peak current : 15A
Working temperature : -40--- 50
Storage Temperature : -40-- 80
Small current : less than 3uA
Life cycle : more than 50000 hours
Resistance : Less than 300mΩ
Short cut protection : Protectable , charge can repair
Size : 41 * 16 * 3.5mm
B Connect battery positive;
B- Connect battery negative;
MB Connect the point between battery 1 & battery 2;
P Charge/discharge positive;
P- Charge/discharge negative;
Model:2S 10A
Overcharging range : 4.25-4.35V 0.05V
Size : 46.7 * 23 * 3.15mm
Over voltage range : 2.5-3.0V 0.05V
Maximum working current : 10A
Working temperature : -40°C- 50°C
Maximum instantaneous current : 20A
Storage conditions : -40°C- 80°C
Static current : less than 10uA
Effective life : more than 50000 hours
Resistance : less than 300 mΩ
Short circuit protection : to protect and restore must charge
Charging voltage : 8.4V-9V
The protection board size and device description;
The protective plate size is 46.7 * 23 * 3.15mm;
B battery anode;
B - connect battery negative terminal;
MB connect battery 1 to battery 2;
P charging / discharge correct poles ( charging end / discharge end sharing ) ;
P - charging / discharge terminal negative terminal ( charging end / discharge end sharing).
Model:2S 13A
This can not be used in lithium iron phosphate battery protection board , hernia lamp , hand electric drill battery , electric fish electromechanical Chizu , electric bicycle batteries , carbatteries , children ( 4 a ) more than 775 motor , fisheye 1 w LED lamp , used for thecombined purchase customers please note !
Overcharging range : 4.25-4.35V±0.05V
Size : 46 * 20 * 3.6 mm
Over voltage range : 2.5-3.0V ± 0.05V
Maximum working current : 13A
working temperature : -40- 50°C
Maximum instantaneous current : 20A
Storage conditions : -40- 80°C
Static current : less than 10uA
Effective life : more than 50000 hours
Resistance : less than 300 mΩ
Short circuit protection : to protect and restore must charge
Charging voltage : 8.4V-9V
The protection board size and device description ;
The protective plate size is 46 * 20 * 3.6 mm
B battery anode;
B - connect battery negative terminal;
MB connect battery 1 to battery 2
P charging / discharge correct poles (charging end / discharge end sharing);
P - charging / discharge terminal negative terminal (charging end / discharge end sharing);
 
Package Included
1 Pcs Battery Protection Board
 

2S 3A 4A 5A 8A 10A 13A 20A 7.4V 8.4V Li-ion 18650 Lithium Battery Protection Board / BMS Board Standard / Balance
Description
Model:2S 5A
Overcharge voltage range:4.25-4.35V 0.05V
Size:17.5*17.5*3.2mm
Over discharge voltage range:2.5-3.0V 0.05V
Upper limit operating current:5A
Operating temperature:-40°C~ 50°C
Upper limit instantaneous current:7A
Storage conditions:-40°C~ 80°C
Quiescent current: less than IOuA
Effective life: more than 50.000 hours
Internal resistance: less than 300mΩ
Short circuit protection: can be protected, need to charge recovery
Charging voltage: 8.4V-9V
Welding point:
B connected to the battery positive;
B-connected battery negative;
MB connects the battery 1 to the connection point before the battery 2;
P corrected to the charge/ discharge side of the positive (charge side dischargeside shared);
P- connect/discharge terminal negative(shared with charge/discharge;
Model:2S 4A
1.High-precision voltage detection function for each battery;2.3 overcurrent detection function;
3.Through the MOS tube can control the battery charge and discharge;
4.Wide operating temperature range:-40°C~ 85°C;
5.Low current consumption;
1.Charging voltage:DC9V CC / CV ( MAX:12V )
2.Current
Single current consumption ( consumption ) ≤ 6UA
Maximum sustained discharge current:4A
3.Overcharge protection
Overcharge detection voltage:4.29V Accuracy ≤ ±0.025V
Overcharge detection delay time:1s
Overcharge recovery voltage:4.05V Accuracy ≤ ±0.025V
4.Over-discharge protection
Over-discharge detection voltage:3V Accuracy ≤ ±0.1V
Over-discharge detection delay time:128ms
Over discharge recovery voltage:3.2V Accuracy ≤ ±0.1V
5.Over-current protection
Overcurrent detection voltage:200mv
Overcurrent detection current:9.8A
Overcurrent delay time:12ms
Recovery Status:Auto Recovery
6.Short-circuit protection
Detection status external short circuit
Detection delay time:≤ 50us
Recovery Status:Auto Recovery
7.Internal resistance:protection circuit:( MOSPET )≤21mΩ
8.Temperature
Operating temperature range:-40°C~ 80°C
Storage temperature range:-40°C~ 125°C
Product size:about 3.50*1.70cm
Model:2S 8A
1.high-accuracy voltage detection circuit;
2.terminal of the charger using high voltage device;
3.Built-in three-stage over-current detection circuit ( over-current 1 , over-current 2 , or or load short circuit);
4.MOS transistor can control the battery charge and discharge;
5.low standby current consumption;
Parameter:
Over charge voltage : 4.25-4.35v ± 0.05v
Over dishcarge voltage : 2.5-3.0v ± 0.05v
Max continuous current : 8A
Max peak current : 15A
Working temperature : -40--- 50
Storage Temperature : -40-- 80
Small current : less than 3uA
Life cycle : more than 50000 hours
Resistance : Less than 300mΩ
Short cut protection : Protectable , charge can repair
Size : 41 * 16 * 3.5mm
B Connect battery positive;
B- Connect battery negative;
MB Connect the point between battery 1 & battery 2;
P Charge/discharge positive;
P- Charge/discharge negative;
Model:2S 10A
Overcharging range : 4.25-4.35V 0.05V
Size : 46.7 * 23 * 3.15mm
Over voltage range : 2.5-3.0V 0.05V
Maximum working current : 10A
Working temperature : -40°C- 50°C
Maximum instantaneous current : 20A
Storage conditions : -40°C- 80°C
Static current : less than 10uA
Effective life : more than 50000 hours
Resistance : less than 300 mΩ
Short circuit protection : to protect and restore must charge
Charging voltage : 8.4V-9V
The protection board size and device description;
The protective plate size is 46.7 * 23 * 3.15mm;
B battery anode;
B - connect battery negative terminal;
MB connect battery 1 to battery 2;
P charging / discharge correct poles ( charging end / discharge end sharing ) ;
P - charging / discharge terminal negative terminal ( charging end / discharge end sharing).
Model:2S 13A
This can not be used in lithium iron phosphate battery protection board , hernia lamp , hand electric drill battery , electric fish electromechanical Chizu , electric bicycle batteries , carbatteries , children ( 4 a ) more than 775 motor , fisheye 1 w LED lamp , used for thecombined purchase customers please note !
Overcharging range : 4.25-4.35V±0.05V
Size : 46 * 20 * 3.6 mm
Over voltage range : 2.5-3.0V ± 0.05V
Maximum working current : 13A
working temperature : -40- 50°C
Maximum instantaneous current : 20A
Storage conditions : -40- 80°C
Static current : less than 10uA
Effective life : more than 50000 hours
Resistance : less than 300 mΩ
Short circuit protection : to protect and restore must charge
Charging voltage : 8.4V-9V
The protection board size and device description ;
The protective plate size is 46 * 20 * 3.6 mm
B battery anode;
B - connect battery negative terminal;
MB connect battery 1 to battery 2
P charging / discharge correct poles (charging end / discharge end sharing);
P - charging / discharge terminal negative terminal (charging end / discharge end sharing);
 
Package Included
1 Pcs Battery Protection Board
 

2S 3A 4A 5A 8A 10A 13A 20A 7.4V 8.4V Li-ion 18650 Lithium Battery Protection Board / BMS Board Standard / Balance
Description
Model:2S 5A
Overcharge voltage range:4.25-4.35V 0.05V
Size:17.5*17.5*3.2mm
Over discharge voltage range:2.5-3.0V 0.05V
Upper limit operating current:5A
Operating temperature:-40°C~ 50°C
Upper limit instantaneous current:7A
Storage conditions:-40°C~ 80°C
Quiescent current: less than IOuA
Effective life: more than 50.000 hours
Internal resistance: less than 300mΩ
Short circuit protection: can be protected, need to charge recovery
Charging voltage: 8.4V-9V
Welding point:
B connected to the battery positive;
B-connected battery negative;
MB connects the battery 1 to the connection point before the battery 2;
P corrected to the charge/ discharge side of the positive (charge side dischargeside shared);
P- connect/discharge terminal negative(shared with charge/discharge;
Model:2S 4A
1.High-precision voltage detection function for each battery;2.3 overcurrent detection function;
3.Through the MOS tube can control the battery charge and discharge;
4.Wide operating temperature range:-40°C~ 85°C;
5.Low current consumption;
1.Charging voltage:DC9V CC / CV ( MAX:12V )
2.Current
Single current consumption ( consumption ) ≤ 6UA
Maximum sustained discharge current:4A
3.Overcharge protection
Overcharge detection voltage:4.29V Accuracy ≤ ±0.025V
Overcharge detection delay time:1s
Overcharge recovery voltage:4.05V Accuracy ≤ ±0.025V
4.Over-discharge protection
Over-discharge detection voltage:3V Accuracy ≤ ±0.1V
Over-discharge detection delay time:128ms
Over discharge recovery voltage:3.2V Accuracy ≤ ±0.1V
5.Over-current protection
Overcurrent detection voltage:200mv
Overcurrent detection current:9.8A
Overcurrent delay time:12ms
Recovery Status:Auto Recovery
6.Short-circuit protection
Detection status external short circuit
Detection delay time:≤ 50us
Recovery Status:Auto Recovery
7.Internal resistance:protection circuit:( MOSPET )≤21mΩ
8.Temperature
Operating temperature range:-40°C~ 80°C
Storage temperature range:-40°C~ 125°C
Product size:about 3.50*1.70cm
Model:2S 8A
1.high-accuracy voltage detection circuit;
2.terminal of the charger using high voltage device;
3.Built-in three-stage over-current detection circuit ( over-current 1 , over-current 2 , or or load short circuit);
4.MOS transistor can control the battery charge and discharge;
5.low standby current consumption;
Parameter:
Over charge voltage : 4.25-4.35v ± 0.05v
Over dishcarge voltage : 2.5-3.0v ± 0.05v
Max continuous current : 8A
Max peak current : 15A
Working temperature : -40--- 50
Storage Temperature : -40-- 80
Small current : less than 3uA
Life cycle : more than 50000 hours
Resistance : Less than 300mΩ
Short cut protection : Protectable , charge can repair
Size : 41 * 16 * 3.5mm
B Connect battery positive;
B- Connect battery negative;
MB Connect the point between battery 1 & battery 2;
P Charge/discharge positive;
P- Charge/discharge negative;
Model:2S 10A
Overcharging range : 4.25-4.35V 0.05V
Size : 46.7 * 23 * 3.15mm
Over voltage range : 2.5-3.0V 0.05V
Maximum working current : 10A
Working temperature : -40°C- 50°C
Maximum instantaneous current : 20A
Storage conditions : -40°C- 80°C
Static current : less than 10uA
Effective life : more than 50000 hours
Resistance : less than 300 mΩ
Short circuit protection : to protect and restore must charge
Charging voltage : 8.4V-9V
The protection board size and device description;
The protective plate size is 46.7 * 23 * 3.15mm;
B battery anode;
B - connect battery negative terminal;
MB connect battery 1 to battery 2;
P charging / discharge correct poles ( charging end / discharge end sharing ) ;
P - charging / discharge terminal negative terminal ( charging end / discharge end sharing).
Model:2S 13A
This can not be used in lithium iron phosphate battery protection board , hernia lamp , hand electric drill battery , electric fish electromechanical Chizu , electric bicycle batteries , carbatteries , children ( 4 a ) more than 775 motor , fisheye 1 w LED lamp , used for thecombined purchase customers please note !
Overcharging range : 4.25-4.35V±0.05V
Size : 46 * 20 * 3.6 mm
Over voltage range : 2.5-3.0V ± 0.05V
Maximum working current : 13A
working temperature : -40- 50°C
Maximum instantaneous current : 20A
Storage conditions : -40- 80°C
Static current : less than 10uA
Effective life : more than 50000 hours
Resistance : less than 300 mΩ
Short circuit protection : to protect and restore must charge
Charging voltage : 8.4V-9V
The protection board size and device description ;
The protective plate size is 46 * 20 * 3.6 mm
B battery anode;
B - connect battery negative terminal;
MB connect battery 1 to battery 2
P charging / discharge correct poles (charging end / discharge end sharing);
P - charging / discharge terminal negative terminal (charging end / discharge end sharing);
 
Package Included
1 Pcs Battery Protection Board
 

2S 3A 4A 5A 8A 10A 13A 20A 7.4V 8.4V Li-ion 18650 Lithium Battery Protection Board / BMS Board Standard / Balance
Description
Model:2S 5A
Overcharge voltage range:4.25-4.35V 0.05V
Size:17.5*17.5*3.2mm
Over discharge voltage range:2.5-3.0V 0.05V
Upper limit operating current:5A
Operating temperature:-40°C~ 50°C
Upper limit instantaneous current:7A
Storage conditions:-40°C~ 80°C
Quiescent current: less than IOuA
Effective life: more than 50.000 hours
Internal resistance: less than 300mΩ
Short circuit protection: can be protected, need to charge recovery
Charging voltage: 8.4V-9V
Welding point:
B connected to the battery positive;
B-connected battery negative;
MB connects the battery 1 to the connection point before the battery 2;
P corrected to the charge/ discharge side of the positive (charge side dischargeside shared);
P- connect/discharge terminal negative(shared with charge/discharge;
Model:2S 4A
1.High-precision voltage detection function for each battery;2.3 overcurrent detection function;
3.Through the MOS tube can control the battery charge and discharge;
4.Wide operating temperature range:-40°C~ 85°C;
5.Low current consumption;
1.Charging voltage:DC9V CC / CV ( MAX:12V )
2.Current
Single current consumption ( consumption ) ≤ 6UA
Maximum sustained discharge current:4A
3.Overcharge protection
Overcharge detection voltage:4.29V Accuracy ≤ ±0.025V
Overcharge detection delay time:1s
Overcharge recovery voltage:4.05V Accuracy ≤ ±0.025V
4.Over-discharge protection
Over-discharge detection voltage:3V Accuracy ≤ ±0.1V
Over-discharge detection delay time:128ms
Over discharge recovery voltage:3.2V Accuracy ≤ ±0.1V
5.Over-current protection
Overcurrent detection voltage:200mv
Overcurrent detection current:9.8A
Overcurrent delay time:12ms
Recovery Status:Auto Recovery
6.Short-circuit protection
Detection status external short circuit
Detection delay time:≤ 50us
Recovery Status:Auto Recovery
7.Internal resistance:protection circuit:( MOSPET )≤21mΩ
8.Temperature
Operating temperature range:-40°C~ 80°C
Storage temperature range:-40°C~ 125°C
Product size:about 3.50*1.70cm
Model:2S 8A
1.high-accuracy voltage detection circuit;
2.terminal of the charger using high voltage device;
3.Built-in three-stage over-current detection circuit ( over-current 1 , over-current 2 , or or load short circuit);
4.MOS transistor can control the battery charge and discharge;
5.low standby current consumption;
Parameter:
Over charge voltage : 4.25-4.35v ± 0.05v
Over dishcarge voltage : 2.5-3.0v ± 0.05v
Max continuous current : 8A
Max peak current : 15A
Working temperature : -40--- 50
Storage Temperature : -40-- 80
Small current : less than 3uA
Life cycle : more than 50000 hours
Resistance : Less than 300mΩ
Short cut protection : Protectable , charge can repair
Size : 41 * 16 * 3.5mm
B Connect battery positive;
B- Connect battery negative;
MB Connect the point between battery 1 & battery 2;
P Charge/discharge positive;
P- Charge/discharge negative;
Model:2S 10A
Overcharging range : 4.25-4.35V 0.05V
Size : 46.7 * 23 * 3.15mm
Over voltage range : 2.5-3.0V 0.05V
Maximum working current : 10A
Working temperature : -40°C- 50°C
Maximum instantaneous current : 20A
Storage conditions : -40°C- 80°C
Static current : less than 10uA
Effective life : more than 50000 hours
Resistance : less than 300 mΩ
Short circuit protection : to protect and restore must charge
Charging voltage : 8.4V-9V
The protection board size and device description;
The protective plate size is 46.7 * 23 * 3.15mm;
B battery anode;
B - connect battery negative terminal;
MB connect battery 1 to battery 2;
P charging / discharge correct poles ( charging end / discharge end sharing ) ;
P - charging / discharge terminal negative terminal ( charging end / discharge end sharing).
Model:2S 13A
This can not be used in lithium iron phosphate battery protection board , hernia lamp , hand electric drill battery , electric fish electromechanical Chizu , electric bicycle batteries , carbatteries , children ( 4 a ) more than 775 motor , fisheye 1 w LED lamp , used for thecombined purchase customers please note !
Overcharging range : 4.25-4.35V±0.05V
Size : 46 * 20 * 3.6 mm
Over voltage range : 2.5-3.0V ± 0.05V
Maximum working current : 13A
working temperature : -40- 50°C
Maximum instantaneous current : 20A
Storage conditions : -40- 80°C
Static current : less than 10uA
Effective life : more than 50000 hours
Resistance : less than 300 mΩ
Short circuit protection : to protect and restore must charge
Charging voltage : 8.4V-9V
The protection board size and device description ;
The protective plate size is 46 * 20 * 3.6 mm
B battery anode;
B - connect battery negative terminal;
MB connect battery 1 to battery 2
P charging / discharge correct poles (charging end / discharge end sharing);
P - charging / discharge terminal negative terminal (charging end / discharge end sharing);
 
Package Included
1 Pcs Battery Protection Board
 

 
DC Power Supply Jack Socket Female Panel Mount Connector 5.5mm 2.1mm 5.5mm 2.5mm Plug Adapter 2 Terminal Types 5.5*2.1/5.5*2.5
 
        
 
Description
Metal panel mounting plastic/metal DC socket
2 terminal type-positive & negative
Fitting hole of 7.8mm required.
Complete with rear fixing locking nut.
It will take 3.2mm push on connectors or solder fit.
Requires total clearance behind panel of 13mm
Specifications:
Contact rating: MAX 3A 12V DC
Connector size: 2.1mm x 5.5mm x 9mm/2.5mm x 5.5mm x 9mm
Product size: 10mm x 10mm x18mm
Max panel depth: 3mm
 
Package Included
1 Pcs DC Connector
 

 
DC Power Supply Jack Socket Female Panel Mount Connector 5.5mm 2.1mm 5.5mm 2.5mm Plug Adapter 2 Terminal Types 5.5*2.1/5.5*2.5
 
        
 
Description
Metal panel mounting plastic/metal DC socket
2 terminal type-positive & negative
Fitting hole of 7.8mm required.
Complete with rear fixing locking nut.
It will take 3.2mm push on connectors or solder fit.
Requires total clearance behind panel of 13mm
Specifications:
Contact rating: MAX 3A 12V DC
Connector size: 2.1mm x 5.5mm x 9mm/2.5mm x 5.5mm x 9mm
Product size: 10mm x 10mm x18mm
Max panel depth: 3mm
 
Package Included
1 Pcs DC Connector
 

 
ESP32-DevKitC Core Board ESP32 Development Board ESP32-WROOM-32D ESP32-WROOM-32U
 
 
 
Description
ESP32-DevKitC V4 Getting Started Guide
This guide shows how to start using the ESP32-DevKitC V4 development board. For description of other versions of ESP32-DevKitC check ESP32 Hardware Reference.
What You Need
ESP32-DevKitC V4 board
USB A / micro USB B cable
Computer running Windows, Linux, or macOS
You can skip the introduction sections and go directly to Section Start Application Development.
Overview
ESP32-DevKitC V4 is a small-sized ESP32-based development board produced by Espres-sif. Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-DevKitC V4 on a breadboard.
To cover a wide range of user requirements, the following versions of ESP32-DevKitC V4 are available:
different ESP32 modules
ESP32-WROOM-32
ESP32-WROOM-32D
ESP32-WROOM-32U
ESP32-SOLO-1
ESP32-WROVER
ESP32-WROVER-B
ESP32-WROVER-I
ESP32-WROVER-B (IPEX)
male or female pin headers.
For details please refer to Espre-ssif Product Ordering Information.
Functional Description
The following figure and the table below describe the key components, interfaces and controls of the ESP32-DevKitC V4 board.
 
Package Included
1 Pcs ESP32 Development Board
 
 

 
ESP32-DevKitC Core Board ESP32 Development Board ESP32-WROOM-32D ESP32-WROOM-32U
 
 
 
Description
ESP32-DevKitC V4 Getting Started Guide
This guide shows how to start using the ESP32-DevKitC V4 development board. For description of other versions of ESP32-DevKitC check ESP32 Hardware Reference.
What You Need
ESP32-DevKitC V4 board
USB A / micro USB B cable
Computer running Windows, Linux, or macOS
You can skip the introduction sections and go directly to Section Start Application Development.
Overview
ESP32-DevKitC V4 is a small-sized ESP32-based development board produced by Espres-sif. Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-DevKitC V4 on a breadboard.
To cover a wide range of user requirements, the following versions of ESP32-DevKitC V4 are available:
different ESP32 modules
ESP32-WROOM-32
ESP32-WROOM-32D
ESP32-WROOM-32U
ESP32-SOLO-1
ESP32-WROVER
ESP32-WROVER-B
ESP32-WROVER-I
ESP32-WROVER-B (IPEX)
male or female pin headers.
For details please refer to Espre-ssif Product Ordering Information.
Functional Description
The following figure and the table below describe the key components, interfaces and controls of the ESP32-DevKitC V4 board.
 
Package Included
1 Pcs ESP32 Development Board
 
 

LED Light String Solar Battery Box LED Power Controller Outdoor Waterproof IP65
 
       
 
Description
Size: 68*68mm
Material: ABS
Parameters: Solar panel polysilicon 2V120MA
Output: 3V 50MA
Function: 8 functions
1. Automatically continuously change each segment
2. The waves move forward and backward
3. Double lights marquee
4. Single light fades in and out
5. Stars twinkling with horse racing
6. Double lights fade out at the same time
7. The stars twinkle
8. All bright
9. Close
Charging time: 4-6 hours
Lighting time: 9-13 hours
Waterproof rating: IP64
Use AA rechargeable batteries
Batteries not included
Does not include LED strips
 
Package Included
1 Pcs LED Light String Solar Battery Box
 

 
HC-SR04P Ultrasonic Ranging Module Ranging Sensor Module 3-5.5V Wide Voltage Performance Is Stronger
Description: 
HC-SR04-P is a wide range voltage work ultrasonic distance measurement module.Module size and the software is fully compatible with the old version HC-SR04.Can be seamlessly switch with the old version HC-SR04 .
Low to 3V minimum operating voltage, so that it can be directly connected with the 3.3V power supply MCU .
Characteristic
Wide voltage operation: 3V-5.5V
With HC-SR04 software and hardware size is fully compatible
Detecting distance:
5V:   2cm - 450cm
3.3V: 2cm - 400cm
Detection angle: <15
Using industrial grade MCU, working temperature: -20 - 80 degrees Celsius
 
Note:
1: This module should not be charged connection, if you want to live connection, then let the module Gnd end connection first. Otherwise it will affect the module work.
2:When  ranging, the area of the measured object is not less than 0.5 square meters, and to be as smooth as possible.
3: if the test surface is irregular or test remote objects,multiple measurements can be used to correct it.
Package Included:
1 Pcs Ultrasonic Sensor Module

1.53 /
 
AAA Battery Holder Case Cover Shell For micro:bit for microbit 2pcs AAA Batteries 3V PH2.0
 

 
Description
Cable length: About 14cm / 5.5inch
For battery type: 2pcs AAA batteries
Interface: PH2.0
Note: Battry Case only. Batteries and other items are not included. 
 
Package Included
1 Pcs PH 2.0 Interface AAA Battery Holder

 
Induction Coil XKT-L17 Of 20mm 10uH Wireless Charging Coil 20mm10uH
 
 
Description
Coil Specification:
Wire Diameter:0.3mm
Coil Outer Diameter:19mm
Coil Thickness:0.6mm
Coil Inductance:10uH
 
Package Included
1 Pcs 10uH 20mm coil

TTP223 Touch Key Switch Module Touching Button Self-Locking/No-Locking Capacitive Switches Single Channel Reconstruction
Description:
1.Size:15*11mm
2.Power:2.5-5.5V
Trigger setting mode: 
(1- > Short ; 0- > No Short)
AB=00:No-lock High TTL level ouput;
AB=01:Self-lock High TTL level ouput;
AB=10:No-lock Low TTL level ouput;
AB=11:Self-lock Low TTL level ouput;
Shipping list:
1 Pcs TTP223 Touch Key Switch Module
 

 
 
 
 
 
 
High Quality DIY Lithium Battery Spring Box 1*AAA Battery Holder SMD SMT Battery Box With Bronze Pins
 
 
Description
Material: PA Nylon,Phosphor bronze with Gold Plated
Type: SMT/SMD
Rated Voltage: DC 1.5V
Color: Black
Quantity: 1 Pcs
Size:53.4X10.8X9.7MM
 
Package Included
1 Pcs AAA Battery Box Holder (Batteries are not included.)
 

 
AMS1117 3.3v AMS1117-3.3V Mini USB 5V/3.3V DC Perfect Power Supply Module
Description:
1. MINI USB Input:5V DC
2. DC Power Socket Input:5V-12V
3. Output:5V/3.3V
4. Size:25*25mm
Package Includes:
1 Pcs AMS1117-3.3V Mini USB 5V/3.3V DC Power Supply Module

 
5V Mini Amplifier AC And DC USB Small Power Amplifier PM2038 Power Amplifiers 5Wx2 High-fidelity Product
 
 
Description
100% Brand New and High Quality
PM2038 is a dual BTL audio power amplifier. When the power supply voltage of 6V, in ensuring the THD less than 10% of cases, the 4ohm load provide 3.5W of output power (peak 5W), but also to the 8 ohm load provide 2.2W of output power.
Technical parameters:
Load: 4ohm, power: typically 3.5W
Voltage: DC6V.
Typical shutdown current: 0.7μA
Operating voltage range: DC2-6V
Built-in power surge pulse suppression circuit
Built-in thermal protection circuit
The board size:
Circuit board size 50 * 44 * 22mm
 
Package Included
1 Pcs PM2038 Power Amplifiers Module

 
ESP8266 serial WIFI Witty cloud Development Board ESP-12F module MINI nodemcu
Description :
 
This cheap and small Wifi transciever is the perfect solution for home Automation and IoT applications. It can be the replacement for your NRF24L01, it can talk to your Wifi router directly through the UART MCU's (Rx, Tx).
The ESP-12 module is one of the most complete of the ESP family as it allows you to use biggest amount of pins. You can program this module to work stand alone with the For Arduino IDE or with LUA as NodeMCU.
It has an LDR and a WS2812 LED already on board for your projects. The board comes with a CH40 micro USB module to program it.
The ESP8266 is a highly integrated chip, including antenna and power management converter. The system is equipped with ESP8266 and it's features are: energy saving VoIP quickly switch between the sleep / wake patterns, with low-power operation adaptive radio bias, front-end signal processing functions.
This version, the ESP8266-03 is one of the smallest versions of this module. It includes a buil-in ceramic antenna.
 
 
Specifications:
 
    LDR Lignt Sensor on board
    WS2812 Led on board
    3x tactile buttons (1x in the Witty board and 2x in theCH340 board)
    Supports 3 modes: AP,STA,AP STA
    Dimensions: 24mm x 16mm
    Micro USB connection for power and/or programming
 
 
Package Included:
 
1 Pcs CH340 Micro-USB interface motherboard.
1 Pcs ESP-12F WIFI Wireless Transceiver Module Breakout Pre-soldered

 
 
MT3608 DC-DC Adjustable Boost Module 2A Boost Plate Step Up Module Micro USB 2V-24V to 5V 9V 12V 28V LM2577 Replace XL6009
 
 
 

Description:
The whole network smallest adjustable boost module can be easily installed in a variety of small equipment.
The module supports MicroUSB input, a USB charger or mobile power supply can easily get to it 9V, 12V, 15V, 18V, 24V, easy to use.
Wide input and output voltage, high conversion efficiency.
 
Property:
1) Maximum output current: 2A (recommended for use within 1A)
2) Input voltage: 2 v ~ 24 v
3) Maximum output voltage:> 28 v (recommended for use within 26V)
4) Efficiency:> 93%
5) Size: 30mm * 17mm * 14mm (L * W * H)
 
Precautions:
1) This module is a step-up module, the output voltage is greater than the input voltage.
2) peak current output current does not exceed 2A.
 
Package Included:
1 Pcs MT3608 2A booster board DC-DC step-up module input 2/24V to 5/9/12 / 28V Replace XL6009
 

1.53 /
 
MAX6675 Module K Type Thermocouple Thermocouple Senso Temperature Degrees Module for Arduino
 
 
Description
MAXIM MAX6675 is an American company with a cold junction compensation, linearity correction, thermocouple break detection ADC Serial K-type thermocouple, its temperature resolution capability is 0. 25 Degree, cold junction compensation range - 20 ~ 80 Degree, wide operating voltage range 3. 0 ~ 5. 5V
Operating voltage: 3. 0 ~ 5. 5V
Internal integrated cold junction compensation circuit;
With a simple three serial interface;
Temperature signal can be converted into 12-bit digital
Temperature resolution of: 0. 25 Degree;
Cold junction compensation range: - 20 ~ 80 Degree,
Embedded thermocouple break detection circuitry.
Using SPI 3 wire communication
K-type temperature probe
Type K temperature range 0-600 degrees
 
Package Included
1 Pcs MAX6675 Sensor

1.53 /
 
MAX6675 Module K Type Thermocouple Thermocouple Senso Temperature Degrees Module for Arduino
 
 
Description
MAXIM MAX6675 is an American company with a cold junction compensation, linearity correction, thermocouple break detection ADC Serial K-type thermocouple, its temperature resolution capability is 0. 25 Degree, cold junction compensation range - 20 ~ 80 Degree, wide operating voltage range 3. 0 ~ 5. 5V
Operating voltage: 3. 0 ~ 5. 5V
Internal integrated cold junction compensation circuit;
With a simple three serial interface;
Temperature signal can be converted into 12-bit digital
Temperature resolution of: 0. 25 Degree;
Cold junction compensation range: - 20 ~ 80 Degree,
Embedded thermocouple break detection circuitry.
Using SPI 3 wire communication
K-type temperature probe
Type K temperature range 0-600 degrees
 
Package Included
1 Pcs MAX6675 Sensor

1.53 /
 
MAX6675 Module K Type Thermocouple Thermocouple Senso Temperature Degrees Module for Arduino
 
 
Description
MAXIM MAX6675 is an American company with a cold junction compensation, linearity correction, thermocouple break detection ADC Serial K-type thermocouple, its temperature resolution capability is 0. 25 Degree, cold junction compensation range - 20 ~ 80 Degree, wide operating voltage range 3. 0 ~ 5. 5V
Operating voltage: 3. 0 ~ 5. 5V
Internal integrated cold junction compensation circuit;
With a simple three serial interface;
Temperature signal can be converted into 12-bit digital
Temperature resolution of: 0. 25 Degree;
Cold junction compensation range: - 20 ~ 80 Degree,
Embedded thermocouple break detection circuitry.
Using SPI 3 wire communication
K-type temperature probe
Type K temperature range 0-600 degrees
 
Package Included
1 Pcs MAX6675 Sensor

 
High Quality AA Battery Holder 6V for 4 X AA Batteries Black Plastic Storage Box Case Dual Layers with 9V Connector
 
 
Description
100% brand new and high quality
Made of Plastic material, lightweight, convenient to carry
You can use this case with your own battery to form power system supply
With spring clip design, you can easily put the battery in it
Material:Plastic
Color: Black
Weight:About 10g
Size: Approx mm (LxWxH):54 X 31 X 29mm
 
Package Included
1 Pcs AA Battery Storage Holder
 
 

40pcs dupont cable jumper wire dupont line F-M dupont line 1P-1P 10/20/30CM 1P-1P
 

Package Included: 
1 Group F-M Dupont line 40P

40pcs dupont cable jumper wire dupont line F-M dupont line 1P-1P 10/20/30CM 1P-1P
 

Package Included: 
1 Group F-M Dupont line 40P

40pcs dupont cable jumper wire dupont line F-M dupont line 1P-1P 10/20/30CM 1P-1P
 

Package Included: 
1 Group F-M Dupont line 40P

Battery Holder 4 x AA Long Strip Back Case 6V Dual Layers Double-sided Box 9V Button Plastic Storage Container Soldering Connect
Description
Generic plastic battery storage case box holder,fit for 4x1.5V cells.
Apply impact resistant material,professional made.
Small size,moderate capacity.
With spring clip design, you can easily to put the battery in it..
Recommended for electronics applications and digital products.
Case only, other accessories demo in the picture are not included!
Tips:
1.No wire.
2.Please do not use this battery box charge,just use for 4 x 1.5V AA battery output use.
Specification:
Model: Long Battery Case
Battery Type: 9V
Material: ABS
Terminal Material: Bronze Nickel
Plastic Material: PP
Battery Box Voltage: 6V
Buckle Voltage: 9V
Color: Black
Dimension: 10.8x2.6x1.8cm/4.25x1.02x0.71in
Package Included
1 Pcs Battery Holder

New Arrival 9V PP3 Battery Holder Box Case Wire Lead ON/OFF Switch Cover DC 2.1mm Plug
Description:
Hold 1 standard 9V battery.
With cover and switch, it can be used as a perfect external power source.
ROHS Standard. Environmental-friendly.
Battery Not included.
Specifications:
1. Material: ABS(High Quality Plastic)
2. Hardware/Rivet: Nickel plated brass 
3. Spring: No
4. Wire Rod: 1007# 24AWG
5. Length of Revealded Wire Rod: 150mm
6. Color: Black
7. External Connection: 2.1x5.5dc RP-SMA Male
8. Standard: ROHS
9. Plug Size: 5.5 x 2.1mm
Package includes:
1 Pcs 9V Battery Holder Box Case Wire Lead ON/OFF Switch Cover DC 2.1mm Plug

Transparent Round 5mm Super Bright Water Clear Green Red White Yellow Blue Light LED Bulbs Emitting Diode F5
 
  
 
Description
white / yellow / White / Blue / Green / red 
 
 
Package Included
100 Pcs 5MM LED

 
 
1pair 8520 Coreless Motor 4.2V 58000RPM High Speed Motors For RC Model Airplane Large Power Hollow Cup Motor Shaft Dia 1.1mm
 
 
Description
Motor parameters:
Motor model: 8520
Voltage: 4.2V (3.7V)
Current: 0.22A
Speed: 58000 rpm
Weight: 5.15 grams
Wire length: 10CM
Shaft diameter: 1.1MM
 
Package Included
1 Pair 8520 Motor
 

2.13 /
 
DC 0-100V 100A Digital Voltmeter Ammeter Dual Display Voltage Detector Current Meter Panel Amp Volt Gauge 0.28" Red Blue LED
 
 
Description
100% Brand New.
Size: 48mm x 29mm x 26mm.
Display color: Red & Blue LED (dual display).
Display: 0.28" LED digital.
Operating voltage: DC 4.5 ~ 30V.
Measure voltage: DC 0 ~ 100V.
Minimum resolution (V): 0.1V.
Refresh rate: ≥500ms / times.
Measure accuracy: 1% (± 1 digit).
Minimum resolution (A): 0.01A.
Operating Current: <20mA.
Measure current: 100A (direct measurement, built-in shunt).
Operating temperature: -10 to 65°c.
Operating Humidity: 10 to 80% (non-condensing).
Mounting cutout: 45.5mm x 26.5mm.
 
Package Included
1 Pcs DC 0-100V Voltmeter Ammeter

2.13 /
 
DC 0-100V 100A Digital Voltmeter Ammeter Dual Display Voltage Detector Current Meter Panel Amp Volt Gauge 0.28" Red Blue LED
 
 
Description
100% Brand New.
Size: 48mm x 29mm x 26mm.
Display color: Red & Blue LED (dual display).
Display: 0.28" LED digital.
Operating voltage: DC 4.5 ~ 30V.
Measure voltage: DC 0 ~ 100V.
Minimum resolution (V): 0.1V.
Refresh rate: ≥500ms / times.
Measure accuracy: 1% (± 1 digit).
Minimum resolution (A): 0.01A.
Operating Current: <20mA.
Measure current: 100A (direct measurement, built-in shunt).
Operating temperature: -10 to 65°c.
Operating Humidity: 10 to 80% (non-condensing).
Mounting cutout: 45.5mm x 26.5mm.
 
Package Included
1 Pcs DC 0-100V Voltmeter Ammeter

1.53 /
DC 12V 24-LED Super Bright White Piranha LED Board Night LED Lights Lamp
 
 
Description
Luminous color:
Warm white / yellow / White / Blue / Green / red 
Name: super bright Piranha LED light board
Brightness: 100 lumens (equivalent to 15W desk lamp)
Lamp beads: 24
Color Temperature: 5500K-6500K (white)
Operating voltage: 10V-14V
Operating Current: 160mA
Rated Power: about 1.6W
Life :50000-80000 hours
Beam Angle: astigmatism (about 150 °)
Dimensions: 80 * 28mm
 
Package Included
1 Pcs Piranha LED Board

1Set PIC K150 ICSP Programmer USB Automatic Programming Develop Microcontroller USB ICSP Cable for Arduino Development Board
 
 
Description
K150 is a high-performance low-cost PIC programmer supports most popular PIC chip programmed, read, encryption and other functions, high-speed USB communication, programming speed, reliable programming quality. (Speed PICSTART average is 3-5 times) programmed automatic calibration; DIP programmer with 40pin Block, can directly programming of 8pin-40pin DIP chip; chip 8pin-40 pin other than through the interface board ICSP online download ; software is compatible with Windows98 and Windows2000 / NT, Windows XP / windows7 operating systems; software upgrades with the PIC will continue to launch new devices. Master chip and DIP packages with reserved seats.
PIC microcontrollers support Model:
10 Series:
 PIC10F200 * PIC10F202 * PIC10F204 * PIC10F206 *
 PIC10F220 * PIC10F222 *
12C Series:
 PIC12C508 PIC12C508A PIC12C509 PIC12C509A
 PIC12C671 PIC12C672 PIC12CE518 PIC12CE519
 PIC12CE673 PIC12CE674
12F Series: 
 PIC12F508 PIC12F509 PIC12F629 PIC12F635
 PIC12F675 PIC12F683
16C Series:
 PIC16C505 PIC16C554 PIC16C558 PIC16C61
 PIC16C62 PIC16C62A PIC16C62B PIC16C63
 PIC16C63A PIC 16C64 PIC16C64A PIC16C65
 PIC16C65A PIC16C65B PIC16C66 PIC16C66A
 PIC16C67 PIC16C620 PIC16C620A PIC16C621
 PIC16C621A PIC16C622 PIC16C622A PIC16C71
 PIC16C71A PIC16C72 PIC16C72A PIC16C73
 PIC16C73A PIC16C73B PIC16C74 PIC16C74A
 PIC16C74B PIC16C76 PIC16C77 PIC16C710
 PIC16C711 PIC16C712 PIC16C716 PIC16C745
 PIC16C765 PIC16C773 PIC16C774 PIC16C83
 PIC16C84
16F series:
 PIC16F505 PIC16F506 PIC16F54 PIC16F57 *
 PIC16F59 * PIC16F627 PIC16LF627A PIC16F627A
 PIC16F628 PIC16LF628A PIC16F628A PIC16F630
 PIC16F631 PIC16F631-1 PIC16F636 PIC16F636-1
 PIC16F639 * PIC16F639-1 * PIC16F648A PIC16F676
 PIC16F677 PIC16F677-1 PIC16F684 PIC16F685 *
 PIC16F685-1 * PIC16F687 * PIC16F687 * -1 PIC16F688
 PIC16F689 * PIC16F689-1 * PIC16F690 * PIC16F690-1 *
 PIC16F716 PIC16F72 PIC16F73 PIC16F74
 PIC16F76 PIC16F77 PIC16F737 PIC16F747
 PIC16F767 PIC16F777 PIC16F83 PIC16F84
 PIC16F84A PIC16F87 PIC16F88 PIC16F818
 PIC16F819 PIC16F870 PIC16F871 PIC16F872
 PIC16F873 PIC16F873A PIC16LF873A PIC16F874
 PIC16F874A PIC16F876 PIC16F876A PIC16F877
 PIC16F877A
18 Series:
 PIC18F242 PIC18F248 PIC18F252 PIC18F258 PIC18F442 PIC18F448
 PIC18F452 PIC18F458 PIC18F1220 PIC18F1320 PIC18F2220 PIC18F2320
 PIC18F2321 PIC18F4210 PIC18F2331 PIC18F2450 PIC18F2455 PIC18F2480
 PIC18F2510 PIC18F2515 PIC18F2520 PIC18F2525 PIC18F2550 PIC18F2580
 PIC18F2585 PIC18F2610 PIC18F2620 PIC18F2680 PIC18F4220 PIC18F4320
 PIC18F6525 PIC18F6621 PIC18F8525 PIC18F8621 PIC18F2331 PIC18F2431
 PIC18F4331 PIC18F4431 PIC18F2455 PIC18F2550 PIC18F4455 PIC18F4550
 PIC18F4580 PIC18F2580 PIC18F2420 PIC18F2520 PIC18F2620 PIC18F6520
 PIC18F6620 PIC18F6720 PIC18F6585 PIC18F6680 PIC18F8585 PIC18F8680
......
 Features:
1. Supports most popular PIC chip programmed, read, encryption and other functions!
2. No external power supply, communications, and power supply only a USB printer cable is completed without any cables.
2. PICSTARTPLUS much faster than the speed of programming.
3. The chip can easily read the contents of the program area.
4. Automatic check the programming.
5. The prompt and comprehensive information, allowing users to clearly understand the working status.
6. programmer with ZIF 40pin Block, can directly program the 8-pin to 40-pin PIC microcontroller, the patch can be programmed using ICSP online or conversion plus seat.
7. 8pin40 pin chip than can be directly output via the on-board ICSP online download.
8. compatible with Windows98 and Windows2000 / NT, Windows XP / Windows 7 and other operating systems.
9. The programming software provides easy to use instructions.
Specifications:
Original box: No
Color: Blue
Item size: 90*46*10mm
Net weight: 103g
 
Package Included
1 Pcs Programmer  
1 Pcs High quality USB cable  
1 Pcs ICSP cable

1Set PIC K150 ICSP Programmer USB Automatic Programming Develop Microcontroller USB ICSP Cable for Arduino Development Board
 
 
Description
K150 is a high-performance low-cost PIC programmer supports most popular PIC chip programmed, read, encryption and other functions, high-speed USB communication, programming speed, reliable programming quality. (Speed PICSTART average is 3-5 times) programmed automatic calibration; DIP programmer with 40pin Block, can directly programming of 8pin-40pin DIP chip; chip 8pin-40 pin other than through the interface board ICSP online download ; software is compatible with Windows98 and Windows2000 / NT, Windows XP / windows7 operating systems; software upgrades with the PIC will continue to launch new devices. Master chip and DIP packages with reserved seats.
PIC microcontrollers support Model:
10 Series:
 PIC10F200 * PIC10F202 * PIC10F204 * PIC10F206 *
 PIC10F220 * PIC10F222 *
12C Series:
 PIC12C508 PIC12C508A PIC12C509 PIC12C509A
 PIC12C671 PIC12C672 PIC12CE518 PIC12CE519
 PIC12CE673 PIC12CE674
12F Series: 
 PIC12F508 PIC12F509 PIC12F629 PIC12F635
 PIC12F675 PIC12F683
16C Series:
 PIC16C505 PIC16C554 PIC16C558 PIC16C61
 PIC16C62 PIC16C62A PIC16C62B PIC16C63
 PIC16C63A PIC 16C64 PIC16C64A PIC16C65
 PIC16C65A PIC16C65B PIC16C66 PIC16C66A
 PIC16C67 PIC16C620 PIC16C620A PIC16C621
 PIC16C621A PIC16C622 PIC16C622A PIC16C71
 PIC16C71A PIC16C72 PIC16C72A PIC16C73
 PIC16C73A PIC16C73B PIC16C74 PIC16C74A
 PIC16C74B PIC16C76 PIC16C77 PIC16C710
 PIC16C711 PIC16C712 PIC16C716 PIC16C745
 PIC16C765 PIC16C773 PIC16C774 PIC16C83
 PIC16C84
16F series:
 PIC16F505 PIC16F506 PIC16F54 PIC16F57 *
 PIC16F59 * PIC16F627 PIC16LF627A PIC16F627A
 PIC16F628 PIC16LF628A PIC16F628A PIC16F630
 PIC16F631 PIC16F631-1 PIC16F636 PIC16F636-1
 PIC16F639 * PIC16F639-1 * PIC16F648A PIC16F676
 PIC16F677 PIC16F677-1 PIC16F684 PIC16F685 *
 PIC16F685-1 * PIC16F687 * PIC16F687 * -1 PIC16F688
 PIC16F689 * PIC16F689-1 * PIC16F690 * PIC16F690-1 *
 PIC16F716 PIC16F72 PIC16F73 PIC16F74
 PIC16F76 PIC16F77 PIC16F737 PIC16F747
 PIC16F767 PIC16F777 PIC16F83 PIC16F84
 PIC16F84A PIC16F87 PIC16F88 PIC16F818
 PIC16F819 PIC16F870 PIC16F871 PIC16F872
 PIC16F873 PIC16F873A PIC16LF873A PIC16F874
 PIC16F874A PIC16F876 PIC16F876A PIC16F877
 PIC16F877A
18 Series:
 PIC18F242 PIC18F248 PIC18F252 PIC18F258 PIC18F442 PIC18F448
 PIC18F452 PIC18F458 PIC18F1220 PIC18F1320 PIC18F2220 PIC18F2320
 PIC18F2321 PIC18F4210 PIC18F2331 PIC18F2450 PIC18F2455 PIC18F2480
 PIC18F2510 PIC18F2515 PIC18F2520 PIC18F2525 PIC18F2550 PIC18F2580
 PIC18F2585 PIC18F2610 PIC18F2620 PIC18F2680 PIC18F4220 PIC18F4320
 PIC18F6525 PIC18F6621 PIC18F8525 PIC18F8621 PIC18F2331 PIC18F2431
 PIC18F4331 PIC18F4431 PIC18F2455 PIC18F2550 PIC18F4455 PIC18F4550
 PIC18F4580 PIC18F2580 PIC18F2420 PIC18F2520 PIC18F2620 PIC18F6520
 PIC18F6620 PIC18F6720 PIC18F6585 PIC18F6680 PIC18F8585 PIC18F8680
......
 Features:
1. Supports most popular PIC chip programmed, read, encryption and other functions!
2. No external power supply, communications, and power supply only a USB printer cable is completed without any cables.
2. PICSTARTPLUS much faster than the speed of programming.
3. The chip can easily read the contents of the program area.
4. Automatic check the programming.
5. The prompt and comprehensive information, allowing users to clearly understand the working status.
6. programmer with ZIF 40pin Block, can directly program the 8-pin to 40-pin PIC microcontroller, the patch can be programmed using ICSP online or conversion plus seat.
7. 8pin40 pin chip than can be directly output via the on-board ICSP online download.
8. compatible with Windows98 and Windows2000 / NT, Windows XP / Windows 7 and other operating systems.
9. The programming software provides easy to use instructions.
Specifications:
Original box: No
Color: Blue
Item size: 90*46*10mm
Net weight: 103g
 
Package Included
1 Pcs Programmer  
1 Pcs High quality USB cable  
1 Pcs ICSP cable

AC-DC 12V500mA Buck Converter Isolation LED Bare Plate Power Module Supply 220V
 
Description:
The power supply has a temperature protection, over-current protection and short circuit protection, AC85 ~ 265V wide voltage input, DC12V output, compact, 431 precision regulator. With EMI filter circuit, high cost performance
 
Input Voltage: AC85 ~ 265V 50/60 Hz/DC100V-370V
 
Output Voltage: DC12V (±0.2V)
 
Output Current: 500mA
 
Power: 6W
 
Input Voltage Range: 85~ 265V
 
Input Current: 0.054A(AC110V) 0.027A(AC220V)
 
Input Inrush Current: 20A
 
Output Voltage Range: 11.80~12.5V 0~600mA
 
Output Power: 0 ~6.5W
 
Output Efficiency: 85%
 
Working Temperature: -20 ~ 60 centigrade 
 
Size: 5*2.3*1.4cm/1.96*0.9*0.55"
 
Installation :
 
A.In the input and output pins soldering on the PCB directly
 
B.Glue in fixed
 
Environment 25 centigrade under 80% load MTBF more than 16,000 hours
 
Package includes:
 
1 Pcs AC-DC Power Module Supply

2 wire 0.56" DC 4.5V-120V Red/Green/Blue Digital Voltmeter Volt Panel Meter for 12V 24V 36V 48V 60V 72V 84V Battery
Description:
Range: DC4.5-120V 
Reverse polarity protection, reverse does not burn
Display: 2 wire 0.56 "LED digital tube
Display color: Red/Green/Blue
Refresh rate: about 200mS / times
Input:DC4.5-120V
Resolution: 1% 1 digit
Power Supply: DC4.0-120V (with the input common-line)
Operating temperature: -10.C-65 .C
Package included:
1 Pcs DC 4.5-120V Digital Voltmeter