Egyéb elektromos berendezések és kellékek

 
DC 5V 12V 24V 30A High Power 1-Channel Relay Module With Optocoupler H/L Level Triger For Arduino Mega AVR PIC DSP ARM
 

 
Description:
5V / 12V / 24V 30A 1-Channel Relay Module with Optocoupler H/L Level Triger
Module description:
30A relay module, normally open interface maximum load: AC 250V/30A, DV 30V/30A
Optical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA
Module can be set high level or low level trigger by the jumper
Power indicator light (green), relay status indicator light (red)
Module Size:50mm*33mm*24mm
Technical parameters:
Voltage version:5V/12/24V
The static current:5mA
Working current:190mA
Trigger current:2-4mA
 
Module interface specifications:
DC : DC power supply positive pole
DC- :DC power supply negative pole
IN : signal triggering pin
JD : relay control voltage positive
JD- : relay control voltage negative
DC and JD shorted by jumper cap, DC- and JD- shorted with jumper cap, it is the same voltage between trigger terminal and relay control terminal
High and low level trigger mode selection.Jumper and L pin connection, IN pin is low level triggerJumper and H pin connection, IN pin is high level trigger
Normally closed pin (NC) : relay normally closed pin
Common pin (COM) : relay common pin
Normally opened pin (NO) : relay normally opened pin
Rated current of the interface is 16A
 
Package Included:
1 Pcs 1-Channel Relay Module
 
 

 
DC 5V 12V 24V 30A High Power 1-Channel Relay Module With Optocoupler H/L Level Triger For Arduino Mega AVR PIC DSP ARM
 

 
Description:
5V / 12V / 24V 30A 1-Channel Relay Module with Optocoupler H/L Level Triger
Module description:
30A relay module, normally open interface maximum load: AC 250V/30A, DV 30V/30A
Optical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA
Module can be set high level or low level trigger by the jumper
Power indicator light (green), relay status indicator light (red)
Module Size:50mm*33mm*24mm
Technical parameters:
Voltage version:5V/12/24V
The static current:5mA
Working current:190mA
Trigger current:2-4mA
 
Module interface specifications:
DC : DC power supply positive pole
DC- :DC power supply negative pole
IN : signal triggering pin
JD : relay control voltage positive
JD- : relay control voltage negative
DC and JD shorted by jumper cap, DC- and JD- shorted with jumper cap, it is the same voltage between trigger terminal and relay control terminal
High and low level trigger mode selection.Jumper and L pin connection, IN pin is low level triggerJumper and H pin connection, IN pin is high level trigger
Normally closed pin (NC) : relay normally closed pin
Common pin (COM) : relay common pin
Normally opened pin (NO) : relay normally opened pin
Rated current of the interface is 16A
 
Package Included:
1 Pcs 1-Channel Relay Module
 
 

 
DC 5V 12V 24V 30A High Power 1-Channel Relay Module With Optocoupler H/L Level Triger For Arduino Mega AVR PIC DSP ARM
 

 
Description:
5V / 12V / 24V 30A 1-Channel Relay Module with Optocoupler H/L Level Triger
Module description:
30A relay module, normally open interface maximum load: AC 250V/30A, DV 30V/30A
Optical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA
Module can be set high level or low level trigger by the jumper
Power indicator light (green), relay status indicator light (red)
Module Size:50mm*33mm*24mm
Technical parameters:
Voltage version:5V/12/24V
The static current:5mA
Working current:190mA
Trigger current:2-4mA
 
Module interface specifications:
DC : DC power supply positive pole
DC- :DC power supply negative pole
IN : signal triggering pin
JD : relay control voltage positive
JD- : relay control voltage negative
DC and JD shorted by jumper cap, DC- and JD- shorted with jumper cap, it is the same voltage between trigger terminal and relay control terminal
High and low level trigger mode selection.Jumper and L pin connection, IN pin is low level triggerJumper and H pin connection, IN pin is high level trigger
Normally closed pin (NC) : relay normally closed pin
Common pin (COM) : relay common pin
Normally opened pin (NO) : relay normally opened pin
Rated current of the interface is 16A
 
Package Included:
1 Pcs 1-Channel Relay Module
 
 

Dual USB 5V 1A 2.1A Mobile Power Bank 18650 Battery Charger PCB Power Module Accessories For Phone DIY New LED LCD Module Board
Description
This is the mobile power module Accessories, 18650 Circuit board shell.
Meet the individual needs of your DIY, but you must understand basic electronic assembly.
Features:
Motherboard comes with protection function: Charging overcharge protection,
over-discharge protection, overcurrent protection.
Intelligent output device after charging full, automatically stop charging,
to prevent mobile phones overcharge.
Output voltage and current stable, will not harm user devices.
Specifications:
Micro USB input: 5V 1A
USB Output: 5V 2.1A / 5V 1A(Dual USB interface)
Charging display: intelligent digital display
Batteries Type: liquid lithium-ion batteries (18650)
Product Size: 57mm x 28mm
Screen size:27mm x 17mm
Installation instructions:
The circuit board is connected to the battery negative B-, B is the positive, do not
connecting reversed, connecting reversed will burn the board, the battery is connected
in parallel welding, assembling battery. Note that the insulation between the battery and the
circuit board, battery lead not to touch the circuit board, so as not to cause a short circuit.
Package Included
1 Pcs Mobile Power Bank 18650 Battery Charger PCB

AC-DC Step Down Power Supply Buck Converter 24V 500mA Isolated Power 220V to 24V
 
Description:
1. Input voltage:AC85~265V 50/60HZ
2. Output voltage:DC24V (±0.2V)
3. Output current: 500mA
4. Power:10W
5. PCB size:6.6*3.1*2.1cm
 
Use environment:
1. Working temperature: -20 to 60 Centigrade
2. Relative humidity: 40 to 90% RH
 
Input characteristics
1. Input voltage range: 85VAC-265VAC
2. Input Current: 0.422 (AC110V) 0.163(AC220V)
3. Input surge current: 20A (full load)
 
Output Characteristics
1. Output voltage range: 23.8V~24.2V
2. Output Current Range: 0A to 2000mA, the peak current of 2200mA
3. Output power: 48w maximum 50W.
4. Output efficiency: 85%
5. Switching Overshoot: 10%
6. Output Rise Time: 100ms
 
Protection:
1. Output Over Power protection: YES.  Recovery characteristics: lock, after re-starting recovery
2. Short circuit protection: YES.  Recovery characteristics: lock, after re-starting recovery
3. Temperature protection: YES.  Recovery characteristics: lock, after re-starting recovery
4. Overcurrent protection: YES. Recovery features: lock, after re-starting recovery
 
 
Package Include:
1 Pcs Switching Power Supply Module (Power Adapter)
​

 
 
4S 30A High Current Li-ion Lithium Battery 18650 Charger Protection Board Module 14.4V 14.8V 16.8V Overcharge Over Short Circuit
Description:
 
1. The module name: 4 string lithium battery protection board
2. The modular nature: polymer lithium battery protection board
3. Overcharge detection voltage: 4.25 ± 0.025V
4. Overcharge release voltage: 4.15 ± 0.05V
5. Over discharge detection voltage: 2.50 ± 0.08V
6. Over discharge termination voltage: 3 ± 0.1V
7. Overcurrent: 20-30A
8. Working current: 15A (natural cooling:10A, plus the heat sink:15A, the maximum instantaneous current:30A)
9. Termination conditions:the release of protection condition then automatic recovery, without activation (optional charger to activate)
10. Main functions: the overcharge protection function, overdischarge protection, short-circuit protection, over current protection.
11. Working temperature: -40~ 85 degrees (high temperature environment and please strengthen radiating)
12. Connection: welding output
13. Module size: 50mm*22mm*4mm
 
Applications:
The protective board can be used as the nominal voltage of 14.4V, 14.8V, 16.8V four series of polymer lithium battery group, four series of 18650 lithium batteries as overcharge and over discharge, short circuit protection. Without the activation function in the power application for high instantaneous current,and in inverter application for avoid false triggering protection.So it will use more convenient.
 
Note:No part design on the back, can be attached to the heat sink to ensure high current work situation for a long time.
 
 
Package Included
1 Pcs 4S 30A High Current Li-ion Lithium Battery 18650 Charger Protection Board Module
 

Qi Wireless Charger PCBA Circuit Board Coil Wireless Charging Micro USB Port DIY quick chargedrop shopping

Description
Qi wireless charger PCBA circuit board,allows to charge for any Qi-enabled device.
Better for DIY, you can give it a case (not too thick) or fix it on your furniture or other devices, but please note the transfer efficient distance is only 5mm.
High power, quick-acting charging.
Over 75% high-efficient energy conversion.
Ultrathin,lightweight,safe and reliable.
Specification:
Wireless charging standard: Qi standard
Input voltage:DC5V
Input current:2A
Charging voltage:5V
Charging current:500-1000mA
Charging power:10W
Charging distance:5mm
Conversion:≥75%
Size:52*51mm
Cable Length：25mm
Suitable for:
Following phones with built-in charging receiver, can be charged directly.
For Nokia 920/8X
For HTC Droid DNA/Rzound/Incredible 4G LTE
For Google (LG) Nexus 4/Nexus 5
For LG DIL /LTE2
For SHARP SH-13C/SH-O4D/SH-O7D/SH-02D
For Samsung S6 edge plus/Note 5
Flowing phones need to buy external Qi-Standard wirless charging receiver:
For Samsung S3 i9300 / S4 I9500 S5 S6
For Note2 N7100 Note 3/4
Flowing phones need to buy external Qi-Standard wirless charging receiver jacket:
For iPhone 4/4S/5/5S/6/6S/6 Plus/ 6s Plus
How to use:
Please confirm that your phone is Qi-compliant.
Protective cases that exceed 7 mm thick prevent the charger from working properly. In this case, remove it before charging
Package Included
1 Pcs Qi Wireless Charger PCBA Circuit Board

SPP-C Bluetooth Serial SPP-CA Pass-through Module Wireless Serial Communication From Machine For Uno
Description:
1.Gerneral
SPP-CA Bluetooth module is  for intelligent wireless data transfer and build, follow V2.1 EDR Bluetooth specification. The module supports UART interface, and supports Bluetooth SPP serial protocol, low cost, small size, low power consumption, the transceiver sensitivity advantages, just with a few external components will be able to achieve its powerful features.
 
2.Features
Bluetooth V2.1 EDR
Bluetooth Class 2
Built- PCB RF antenna
Support UART interface
3.3V power supply
Package included:
1 Pcs SPP-C Bluetooth Serial SPP-CA Pass-through Module

For potentiometers, please click on the picture
6.35mm Potentiometer Rotary Knob Cap For 7276 3590S RV24YN20S WXD3-13
Description:
OD=22MM
Height=25MM
Φ6.35mm
 
Package Included:
1 set of knobs

 
DX-BT18 SPP2.0 Bluetooth Module Serial Transmission BLE4.0 Support Compatible With HC-05 HC-06
 

 
Description:
Bluetooth protocol: Bluetooth 4.2 BR/EDR BLE 2.4GHz-Proprietary
Operating frequency: 2.4GHz ISM band
Communication interface: UART power supply MIN: 1.8V – MAX: 3.6V (3.3V recommended)
Communication distance: 30-40M (open environment)
Dimensions: 27mm x 13mm x 2.35 mm
Bluetooth certification: ROHS REACH FCC
Bluetooth name: BT18 (can be customized)
Pairing code: 1234 (SPP agreement is valid)
Serial port parameters: 9600, 8 data bits, 1 stop bit, no parity, no flow control
Service: UUID FFE0
Notify\Write: UUID FFE1
Write UUID: FFE2 Storage temperature MIN: -40°C - MAX: 140°C
Work temperature: MIN: -20°C - MAX: 85°C
For details, please contact us.
 
Package Included:
1 Pcs DX-BT18 SPP2.0 Bluetooth Module
 

 
3S 40A Li-ion Lithium Battery Charger Lipo Cell Module PCB BMS Protection Board For Drill Motor 12.6V With Balance

Description
3S 12.6V 40A lithium battery protection board (comes with recovery function-AUTO Recovery)
Scope: Nominal voltage of 3.7V lithium battery (including 18650,26650, polymer lithium battery)
Product Size: 41 * 55 * 3.4mm (Enhanced Version), 41 * 60 * 3.4mm (Balanced version)
Product weight: 8.8g (enhanced version), 9.8g (balanced version)
Charging voltage: 12.6V - 13.6V
Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current )
Continuous charge current (upper limit): 20A
Enhanced version:Suitable for electric drill with starting current below 80A and power below 130W .(without balanced function)
Balanced version: Suitable for electric drill with starting current below 80A and power below 170W .(with balanced charging function)
Note 1: To successful starting the drill requires three 15C-20C power batteries, or six 10C-15C power batteries (ordinary 18650 battery can not start the drill!!).
Note 2: When you wiring 0V, 4.2V, 8.4V, 12.6V, please do it strictly according to the wiring diagram.Do not deliberately make it short circuit.
Note 3: When the battery is charging,the "430" resistance heating is normal,it means the balance circuit is working.If the "430" resistance is also heating without charging,please check if the wrong wire is connected.
Note 4: Do not use a mix of good battery and poor battery,please make sure each battery is the same in capacity and internal resistance.
For some of the poor basis of electronic customers to explain: balanced charge is only auxiliary functions, try not to put a good battery and poor battery mixed together! 3 sets of battery capacity / resistance closer to the better! (2 good battery 1 Poor battery use effect = 3 poor battery use effect).
Package Included
1 Pcs 3S 40A Li-ion Lithium Battery Charger Lipo Cell Module
 
 

DC Buck Step Down Module LM2596 DC-DC 4.0~40V To 1.25-37V Adjustable Voltage Regulator With LED Voltmeter DC-DC 2A Short Circuit

 
 
Description:
Module Model:LM2596 Buck Converter Voltmeter
•Cutting Size: 66mm x 35mm
•Input Voltage: DC 4.0~40V
•Output Voltage: 1.25V~37V (continuously adjustable, the input voltage must be 1V higher than the output voltage)
•Output Current: 2A(normal and stable), 3A Max.
•Ripple Frequency: About 150Khz
•Ripple Peak: About 100mV
•Display Color: Red
•Voltage Meter Error: ±0.1V
•Measure Range:4~40V (for measure accurately, please ensure that the input voltage is more than 4V)
•IN : Input Postive
•IN-: Input Negative
•Out : Output Postive
•Out-: Ouput Negative
 
Specification:
•A key switch input and output voltage
•green light: measuring the output voltage
•red light: measuring the input voltage
•with terminal and retain the wire bonding wiring point
 
Package Included:
1 Pcs LM2596 DC-DC Buck Step Down Module
 

 
17x11x3.8mm RC Airplane Module Mini 360 DC Buck Converter Step Down Module 4.75V-23V to 1V-17V New LM2596
 
Feature:
Model Name:  Mini-360 (ultra small size DC-DC synchronous rectifier buck module) 
Module Properties:  non-isolated buck 
Rectification:  synchronous rectification 
Input voltage: 4.75V-23V 
Output voltage:  1.0V-17V 
Output Current:  lowering the value of 3A, long 1.8A 
Conversion efficiency:  96% (maximum) 
Switching Frequency:  340KHz 
Output ripple: 30mV (no-load) 
Load regulation:  ± 0.5%  
Voltage regulation:  ± 2.5%  
Working temperature:  -40 Celsius to 85 Celsius 
Features:  Use integrally molded power inductor and synchronous rectifier control chip, smaller and more efficient.
 
Packing list:
1Pcs Mini-360 RC Airplane Module

 
6S 15A 24V PCB BMS Protection Board For 6 Pack 18650 Li-ion Lithium Battery Cell Module New Arrival
 

 
Description:
Size: approx.50*30*2mm
Lampshift maximum discharge current: 15A
Instantaneous discharge current: 25A
Charging voltage: 25.5V
Charging current: 15A (MAX)
Overcharge detection voltage: 4.28 ± 0.05V
Overcharge protection delay: 0.1S
Overcharge release voltage: 4.08 ± 0.05V
Over discharge detection voltage: 2.55 ± 0.08V
Overdischarge detection delay: 0.1S
The overdischarge release voltage: 2.9 ± 0.1V
Overcurrent detection voltage: 150mV
Overcurrent detection delay: 9MS
Overcurrent protection current: 30 ± 3A
Overcurrent protection release condition: Disconnect the load
Short circuit detection delay: 250uS
Short circuit protection Release condition: disconnect negative open
Main circuit conduction resistance: ≤20mΩ
Working current: ≤30uA
Sleep current (battery over discharge) ≤10uA
Temperature range: -30 / 80 ℃
 
Feature:
Fine workmanship and durable.
For the rechargeable (generally refers to the lithium battery) from the protection of the integrated circuit board. Lithium battery (rechargeable type) so need protection. 
As the lithium battery itself determines the material itself can not be overcharge, over discharge, overcurrent, short circuit and ultra-high temperature charge and discharge, so lithium battery lithium components will always follow a protective resistor with a sampling resistor and a current fuse.
 
Note:
Please allow 1-5mm errors due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
 
Package included:
1 Pcs 6S 15A 24V PCB BMS Protection Board
 
 

ESP8266 ESP-01 ESP-01S DHT11 Temperature Humidity Sensor Module esp8266 Wifi NodeMCU Smart Home IOT DIY Kit (without ESP module)
Description:
SThis module is mainly controlled by esp8266-01 / esp-01s, and DHT11 is the temperature and humidity sensor.
The temperature and humidity of ESP8266 are uploaded to the server.
Support 3.7 v-12v DC supply (3.7 v lithium battery).
It can be used as a temperature and humidity collection node for smart home or IOT projects.
Features:
 * main control: esp-01 / esp-01s (this module does not include esp-01 / esp-01s)
 * temperature and humidity sensor: DHT11
 * working voltage: DC 3.7 v-12v (support for 3.7V lithium battery)
 * measurement range: 20-90% RH 0 to 50 °
 * accuracy of measurement: temperature: plus or minus 2 ° humidity / - 5% RH
Package included:
1 Pcs DHT11 Temperature Humidity Sensor Module (without ESP module)

2-3S BB low voltage alarm buzzer electric display Lithium battery electric quantity Single horn
 
Description:
Suitable battery:All 2S-3S Lithium battery
Size:32*18*9MM  L*W*H
Net weight:5g
Packing weight:15g
Feature:
Using precision IC, all components are SMD components, small volume and light weight, applicable to any aircraft, vehicle model, no extra burden.
Function:
Real time detection of lithium battery discharge voltage of each battery,When either battery voltage is lower than the 3.0V,it alarms and flash lights,remind game player to replace the battery and charge in time, prevent the battery over discharge, protect effectively the service life of the battery.
Usage:Battery on the model,insert the alarm into the charging socket and fix.
Package included:
1 Pcs  Lipo Battery Tester
 

 
US-016 Module Analog Voltage Output Double Range Analog Ultrasonic Ranging Module DC 5V
Description:
Operating Voltage:  DC 5V
Operating Current:  3.8mA
Operating temperature:  0 to 70 degrees
Analog output voltage:  (0 ~ Vcc)
Induction angle:  less than 15 degrees
Detection range:  2cm-300cm
Detection accuracy: 0.3cm 1%
Resolution:  1mm
 
Package Included:
1 Pcs Ultrasonic Module

Hot Selling! 1 PCS Electronic diy kit LM3915 Audio Level Indicator DIY Kit Electronic Production Suite Good
Description:
LM3915 audio level indicator kit (presented two connecting lines)
Power supply voltage: DC 9V - 12V
PCB Size: 62mm * wide 27mm
Two kinds of instruction modes: strip instructions and fire point-like instructions
Lights provide both vertical and horizontal rows of installation 
HAL treated pad
Parameters are printed directly on the PCB components, without reference to the circuit diagram of the situation can be welded directly, very convenient.
HAL treatment pads, solder joints can be better, but beautiful.
Package included:
1 Pcs LM3915 Audio Level Indicator DIY Kit Electronic Production Suite

 
Mobile power supply chip 5V boost board belt recognition module Mobile phone charge MICRO interface
 
 

Description:
1, charging input: 5V1A
2, chip output: 5V1A
interface:
1, input interface: MICRO USB female Interface
2, output interface: Standard USB  female Interface
measurements:
Long * wide * high 50*20*10mm
suitable for battery:
Polymer lithium batteries, 18650 lithium batteries, cell phone batteries, such as 3.7V standard lithium battery, can be a single (slice) power supply, can also be multi section (slice) parallel power supply. (parallel increase capacity)
Not available: dry batteries, batteries, 1.2V rechargeable batteries, nickel metal hydride batteries, lithium polymer lithium polymer lithium batteries, etc., can not be used in series!
indicator light:
Charge: red light.
Full: green light.
Load: blue light.
Note: the chip itself has been shown in the LED lamp, and the 6 expansion ports can also be used as a display for the LED.
Note: lithium battery anode is connected to the B , B - connects to the cathode of the lithium battery, any time reverse connection of the battery are very possibly burn out circuit and burned circuit is not guaranteed.
recognition circuit:
At present, the chip directly supports IPHONE and other devices need to charge the identification of mobile phone charging
protection board:
With the lithium battery protection board, preventing overcharge and overdischarge.
standby loss:
The static current is extremely small, no need to install the switch.
 
Package Included: 
1 Pcs Mobile power supply chip 5V boost board
 

10pcs Serial Port For MCU Mini RS232 to TTL Converter Adaptor Board Module MAX3232 3-5V Electronic Parts Development
  Packaging list:
10pcs Mini RS232  to TTL Converter 

PCF8591 module AD / DA conversion modules analog-to-digital / digital-to-analog conversion
 

PCF8591 AD / DA chip introduced
PCF8591 is a monolithic, single supply, low-power, 8-bit CMOS data acquisition devices. PCF8591 has 4 analog inputs, one analog output and a serial I2C bus interface. PCF8591 of three address pins A0, A1 and A2 can be used for programming the hardware address, allowing access to eight PCF8591 devices on the same I2C-bus, without the need for additional hardware. Input and output on the PCF8591 device address, control and data signals through two-line bidirectional I2C bus serially transmitted.
PCF8591 Key performance indicators:
 single power supply
 PCF8591 operating voltage range of 2.5V-6V
 
 Low Standby Current
 via I2C-bus serial input / output
 PCF8591 by 3 hardware address pins addressing
 PCF8591 I2C bus speed sampling rate decision
 4 programmable analog inputs for single-ended or differential inputs
 auto increment channel selection
 PCF8591 analog voltage range from VSS to VDD
 PCF8591 built-in track and hold circuit
 8-bit successive approximation A / D converter
 DAC gain realized by an analog output
 
Two baby description
A module chip PCF8951
2 module supports four external voltage input acquisition (voltage input range 0-5v)
3 modules integrated photoresistor, you can collect the ambient light intensity AD exact numeric
4 modules integrated thermistor, you can collect the ambient temperature exact numeric AD
5 module integrates a road 0-5V voltage input acquisition (via the blue potentiometer to adjust the input voltage)
6 modules with power indicator (on the module power indicator will light)
7 modules with DA output indicator, when the module DA output interface voltage reaches a certain value, it will light up the board DA output indicator, the greater the voltage, the LED brightness is more obvious;
8 module PCB size: 3.6cm * 2.3cm
9 standard dual panel, thickness 1.6mm, nice layout, surrounded by a through-hole, pore size: 3mm, convenient fixed
Three module interface specification
The module on the left and right, respectively, 2-way external expansion pin connector, respectively, as follows:
DA output interface chip left AOUT
AINO chip analog inputs 0
AIN1 chip analog inputs 1
AIN2 chip analog inputs 2
AIN3 chip analog inputs 3
The right of the clock SCL IIC interface connected microcontroller IO port
SDA IIC digital interface connected microcontroller IO port
GND module to external ground
VCC power supply interface external 3.3v-5v
 
Four modules red cap shorted instructions
There are three red module shorted cap, respectively, the following effects:
P4 P4 shorting cap connected, select thermistor access circuit
P5 P5 connected shorting cap, select photoresistor access circuit
P6 P6 connected shorting cap, select 0-5V adjustable voltage access circuit
 
Package Included:
1 Pcs  PCF8591 module

 
Mini DC Motor PWM Speed Controller 3V 6V 12V 24V 35VDC 90W 5A DC Motor Speed Control Switch LED Dimmer
Description:
Operating Voltage: DC3V-35V
Control Power: 90W (maximum)
Quiescent Current: 0.015A (standby)
PWM Duty Cycle: 1% -100%
PWM Frequency: 10khz
Size: 24*30mm/0.94*1.18"
Package included:
1 Pcs Mini DC Motor Speed Controller

40 Pin IDE Bootable Adapter CF to IDE Adapter Compact Flash CF to 3.5 Female Converter Card
Description:
100% brand new and high quality
Bootable from CF
Standard IDE interface, true-IDE mode, and support DMA-33 transfer mode
Diskless network clients
Any other device requiring rugged solid-state storage
On-board LED indicators for power-on and compact flash access
Voltage selection for 3.3V or 5V compact flash
Master or slave mode selection
Power input: 5V, floppy disk drive power connector
Fully compatible with Compact Flash Type I, Type II, and Micro-drive 40-way (2.54mm) standard
This adapter does NOT support hot insertion of CF cards
Support CF-!and CF-!, also support IBM micro-driver with CF- !interface
System Requirement: PC or Mac with one IDE connector ; MS Windows, Mac OS, Linux operating system
Protect the HDD; connect with portable instrument with X86 or RISC core or data movable tool
CF: double side
IDE: 40 pin female
Color: shown as the picture
Material: plastic and electronics
Specifications:
Color: Black
Item size: 60*45*6mm
Net weight: 14g
Package weight: 23g
Package Included
1 PCS CF to 40Pin IDE Adapter

LCD 1602 Yellow screen with backlight display 1602A 5v module
Description:
Brand new and high quality
LCD display module with green blacklight
Wide viewing angle and high contrast
Built-in industry standard HD44780 equivalent LCD controller
Commonly used in: copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices
LCM type: Characters
Can display 2-lines X 16-characters
Operate with 5V DC
Module dimension: 80mm x 36mm x 12mm
Viewing area size: 64.5mm x 16mm
 
Shipping list: 
1 Pcs 1602 Yellow Green Screen LCD Module

20 Keys Mini Small Infrared Remote Control (Without Batteries)
 
 
Description
Remote control chip uses NEC encoding format UPD6122
Frequency 38K
Size 86 * 40 * 6mm
Emission standard 8 m distance
CR2025 battery powered
Button force 200-350g
Key normal life of more than 200,000 times
 
Package Included
5 Pcs 20 Keys Mini Small Infrared Remote Control

20-110 Celsius hot water boiler laboratory thermometer measuring temperature gauge
​
Description:
Product name: water thermometer; 
Material: Plastic 
Temperature range: 20 -110 Celsius; 
Measurement error: /- 2 
Celsius Temperature measurement size (approximately): 62 x 50 x 28 mm 
Sensor Head Diameter: 5.8mm Color white; 
Weight: 57g
Description replacement for your broken or non-working water thermometer. 
Suitable for stainless steel water heater temperature readings device.
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3 cm.
Package included:
1 Pcs Water Thermometer
 

STC15L204 MCU Wireless Development Board With NRF24L01 5V-3.3V UART Interface
Product Description:
Onboard STC15L204EA microcontroller chip, this single chip to power 3.3V
NRF24L01 wireless on-board module
Onboard UART interface, are used to implement serial communication
On-board 5V 3.3V chip AMS1117-3.3 chips
All I/O all leads, and mark the name I/O
PCB dimensions: 39 (mm) x26 (mm)
 
Package Included
1 PCS STC15L204 MCU Wireless Development Board

 
12V 24V Voltage LED Dimmer Switch 8A Plast / 30A Aluminum Regulator Adjustable Controller for Single Color LED Strip Light Lamp
 

 
Description
Type: DC 12V-24 8A/30A Dimmer
Input: 12-24V
Output: 1 Channel 96W 12-24V (0-8A)/360W 12-24V (0-30A)
Static power consumption: 1W
There is a black knob, just twirl it to adjust the brightness of LED lights
Working Temperature: -20~60ºC
Applications:
You can conveniently adjust the brightness of your LED bulbs/Led Strip with this dimmer
Led Dimmer is a controller that it can adjust brightness infinitely, its control mode is knob-operated control, you could adjust light to the appropriate lighting brightness in accordance with your actual need, Perfect tools for most lighting purpose.
Features:
0~100% brightness adjustable
Easy to install and simple to use
Adjust the light soft and stable, no flickering.
PWM digital dimming, avoid rush current, protect your LED lights
Mainly use to adjust single color LED light lamps and Led Strip.
Constant voltage and constant current output can be connected with amplifiers to extend its load.
 
Package Included
1 Pcs 12-24V 8A/30A Dimmer

 
12V 24V Voltage LED Dimmer Switch 8A Plast / 30A Aluminum Regulator Adjustable Controller for Single Color LED Strip Light Lamp
 

 
Description
Type: DC 12V-24 8A/30A Dimmer
Input: 12-24V
Output: 1 Channel 96W 12-24V (0-8A)/360W 12-24V (0-30A)
Static power consumption: 1W
There is a black knob, just twirl it to adjust the brightness of LED lights
Working Temperature: -20~60ºC
Applications:
You can conveniently adjust the brightness of your LED bulbs/Led Strip with this dimmer
Led Dimmer is a controller that it can adjust brightness infinitely, its control mode is knob-operated control, you could adjust light to the appropriate lighting brightness in accordance with your actual need, Perfect tools for most lighting purpose.
Features:
0~100% brightness adjustable
Easy to install and simple to use
Adjust the light soft and stable, no flickering.
PWM digital dimming, avoid rush current, protect your LED lights
Mainly use to adjust single color LED light lamps and Led Strip.
Constant voltage and constant current output can be connected with amplifiers to extend its load.
 
Package Included
1 Pcs 12-24V 8A/30A Dimmer

JDY-10 Bluetooth 4.0 Module BLE Bluetooth Serial Transparent Module Is Compatible with CC2541 Slave Bluetooth
Description：
Model: JDY-10 Bluetooth 4.0 slave module
Kernel: M0
Communication interface: serial port
Operating voltage: 1.9-3.6V
Communication distance: 100 meters (some modules transmit power, communication distance than the previous module to much
Working current: 90ua
Suspen mode: 14 uA
Module: Bluetooth 4.0 from the machine
Product brief introduction prefix = "o" ns = "urn: schemas-microsoft-com: office: office"
JDY-10 transparent transmission module is based on the Bluetooth 4.0 protocol standard, the working frequency band is 2.4GHZ range, the modulation mode is GFSK, the maximum transmitting power is 8db, the maximum transmitting distance is 80 meters, with low power consumption, small size, strong signal, data transmission Stability and other characteristics.
product features
1: support for Android, IOS mobile phone data through
2: support low power (standby current up to several uA)
3: Support GPIO and UART peripheral interface
4: Support AT instruction operation
5: FCC / CE and other standards through certification
 
Product Application
1: Bluetooth LED lighting
2: motor adjustment and other products
3: anti-lost alarm and other products
4: sports health care
5: small appliances
6: automotive electronics
Factory default configuration:
Service UUID: FFE0
Feature UUID: FFE1
Serial baud rate: 115200bps
Package included:
1 Pcs JDY-10 Bluetooth 4.0 Module

CP2102 USB 2.0 to UART TTL 5PIN Connector Module Serial Converter New
Description:
Stable and reliable chipset CP2102
USB specification 2.0 compliant with full-speed 12Mbps.
Standard USB type A male and TTL 5pin connector. 5pins for 3.3V,TXD,RXD,GND & 5V
All handshaking and modem interface signals
Baud rates: 300 bps to 1.5 Mbps.
Byte receive buffer; 640 byte transmit buffer.
Hardware or X-On/X-Off handshaking supported.
Event character support Line break transmission.
USB suspend states supported via SUSPEND pins.
Temperature Range: -40°to 85°
Supports Windows 98SE, 2003, XP, Vista, Window7, OSX , Linux 2.6.x and 2.4.36
main color:Red
size:about 45*14*8 mm
Package Included:
1 Pcs CP2102 Module

NodeMCU Motor Shield Board L293D for ESP-12E From ESP8266 Esp 12E Kit Diy Rc Toy Wifi Rc Smart Car Remote Control
Description:
Based on the first motor-driven expansion board ESP-12E development.
 
Features:
 
l ESP12 DEV KIT development board expansion module;
 
l lead ESP12 DEV KIT All-function pins: SPI, UART, GPIO, AI and 3.3V power connector;
 
l expand two-way motor-driven, two-way direct drive motor;
 
l onboard power switch;
 
l L293D
 
l Motor power range: 4.5V ~ 36V;
 
l Control power range: 4.5V ~ 9V;
 
l Motor power, control power separation; In the experiment, by short-circuiting block the merger, the VIN and VM short, while power supply to the motor and the control board.
Package included:
1 Pcs NodeMCU Motor Shield Board

JDY-19 host Ultra-low Power Consumption Bluetooth 4.2 BLE Module
Description
Model: JDY-19 main module
Working frequency band: 2.4G
Transmitting power: 4db (maximum)
Communication interface: UART
Operating voltage: 1.8V – 3.6V
Working temperature: -40 ° C - 80 ° C
Antenna Built-in: PCB antenna
Receive sensitivity: -97dbm
Transmission distance: 40 meters
Master and slave support: host
Module size: 19.6 * 14.94 * 1.8 mm (length, width, height)
Bluetooth version: BLE 4.2 (compatible with BLE4.0, BLE4.1)
Master-slave communication current: less than 1mA
Search slave current: 4mA
Deep sleep current: 3uA
Instruction parameter saving: parameter configuration power-down data is saved
STM soldering temperature: <260°C
rf-TX/RX peak current: 5mA
Package Included
1 Pcs JDY-19 host Module

XH-M601 Intelligent Charger Power Control Panel Automatic Charging Power 12V Battery Charging Control Board For Diy Kit
Description
Model: XH-M601
Power Supply: 13.8V-14.8V
Relay closing voltage: 12.4V
Relay off voltage: 14.8V
Voltage error:±0.1V
Voltage detection: DC voltmeter
Charging type: 12V battery
Potentiometer adjustment: RP1 RP2 (carefully adjusted)
PCB Board Size: 65mm x 52mm x 30mm / 2.56" x 2.05" x 1.18" (L x W x H)
Note:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 0.5-1cm measuring deviation due to manual measurement.
1 cm = 0.3937 "
RP1 regulates the battery start charging voltage (low voltage setting: clockwise high, counterclockwise low) factory setting is 12.4V
RP2 regulates battery disconnect charge voltage (low voltage setting: clockwise high, counterclockwise low) factory set to 14.8V
Package Included
1 Pcs M601 Battery Charging Bontrol Board

NRF24L01 2.4G Wireless Data Transmission Module 2.4GHz NRF24L01 Upgrade Version NRF24L01 PA LNA 1000 Meters for Arduino
 
 
Description
Voltage: 3-3.6V
Max output power: 20 dBm
Working current in transmit mode: 115mA
Working current in receiver mode: 45mA
Current in    mode: 4.2uA
Operating temperature: -20-70 degree
Receiver sensitivity: -92dBm in 2Mbps mode, -95dBm in 1Mbps mode, -104dBm in 250kbps mode
PA growth: 20dB
LAN growth: 10dB
LAN noise figure: 2.6dB
Antenna growth: 2dBI
2M rate: 520m
 
Package Included
1 Pcs NRF24L01 PA LNA Wireless Module

 
WTV020 WTV020-SD WTV020SD-20SS Mini SD Card MP3 Sound Module voice module For PIC Uno 2560 UNO R3 WTV020-SD-16P
Description:
1.the product features
Products for WTV020 chip module plug the SD card, supports 32M ~ 1GBit capacity card;
Supports the FAT file system, SD card as storage medium;
And supports playback of WAV format files 4Bit ADCPM;
Supports automatic speech recognition folders and file playback;
You can play background music and commercials language;
Control methods are key control, second control and UART232 serial control;
WTV master chip has WTV020-16SOP and WTV020-20SOP two packages, both of which are compatible;
You can play any segment of speech;
Operating voltage: DC2.6 ~ 3.6V;
Classified by folder store content, easy to operate.
2.Product Overview
WTV020 plug-in SD card Voice module, the main chip selection WTV020-16S and WTV020-20S package chips. Voice updates directly through an SD card reader on a PC replacement. Control is also an SD card stored in TXT file changes. The module supports the FAT file system. Support and ADPCM WAV file playback. Supports two-wire serial control mode, key methods and UART232 serial manner. Automatic speech recognition and speech sample rate format.
 
Package Include
1 Pcs  WTV020-SD Module

Stereo 3.5 Blutooth Wireless for Car Music Audio Bluetooth Receiver Adapter Aux 3.5mm A2dp for Headphone Reciever Jack Handsfree
 
Description:
Dimensions : 52mm(L) x 21mm(W) x 11mm(D)
Bluetooth v3 EDR, Class 2
Support A2DP V1.2 (built in Mic)
Powered by USB 5V DC
Transmission Rate:3(Mbps)
Built-in microphone
Transmission distances of up to 10M
Support A2DP stereo
3.5mm stereo inlet socket
Sleep mode for energy saving
Support Bluetooth hands-free function
Up to 8 hours music playback or continuous
Wireless music receiver connects to 3.5mm headphone jacks
Use with home stereos/speakers, car stereos,headphones etc.
Package included:
1 Pcs Bluetooth Music Receiver Built-in Mic
1 Pcs Micro USB Power Cable
1 Pcs 3.5mm Stereo Inlet Socket
 

12V RF Wireless Remote Switch Controller Dimmer for Mini LED Strip Light (No battery pack)

Description:
1.Turn On/ Standby
Press this key to turn on unit or switch to standby mode. Unit will turn on and restore to previous status at powering on moment.
2. Lighting mode
Switch to lighting mode from dynamic mode.
3/8/9. Dimmer Adjust Shortcuts
Switch to 100% , 50% , or 25% brightness lighting mode.
4/6. Dynamic Mode Adjust
Switch to dynamic mode from lighting mode, or switch between different dynamic modes.
5/7. Speed Adjust
Adjust playing speed of dynamic modes. Press SPEED to increase seed and press SPEED- to decrease.
10/11. Brightness Adjust (Dimmer)
Adjust lighting mode brightness. Press BRIGHT to increase brightness and press BRIGHT- to decrease
Functions for RF Wireless Remote
Dimmer & Dynamic
8 Dynamic Effects
10-level Dimmer
256-Grade PWM
Speed Adjustable
Card Type Remote
Ultra Slim Design
Smooth Dimmer Effect
1 to 1 Remote Paired
Auto Save Function
Installing for RF Wireless Remote
1. Power Supply
This unit accepts DC 5V to 24V power supply. The red cable should be connected to positive and black cable to negative.
Please select proper power supply according to the LED application.
2. LED Output
The red cable should be connected to LED positive and black cable to negative. The peak output current is 12A, please reduce load if main unit is overheating.
CAUTION:Do not short circuit the LED output, this may lead to permanent damage!
3. Remote Control
Please pull out the insulate part before using. The RF wireless remote signal can pass through barrier, so it\'s not necessary to aim at the main unit when operate. For proper receiving remote signal, do not install the main unit in closed metal parts.
Note: The remote battery is 3V CR2025 type (not included)
 
Specification:
Dynamic mode: 8 modes
Dynamic speed level: 10 levels
Lighting brightness level : 10 levels
PWM grade: 256 grades
Smooth dimmer effect: Yes
Working voltage: DC 5~24V
Output current : peak 12A
Remote control mode: RF Wireless
Remote frequency: 433.92MHz
Remote distance : >15m at open area
Battery  type: 3V CR2025  (not included)
 
Package includes:
1 Pcs Mini In-line LED Light Controller/Dimmer
1 Pcs RF Wireless Remote Controller R106

 
 
34725 TCS34725 Color Sensor RGB Color Sensor Development Board Module
 
 
Description
1. Red, Green, Blue (RGB), and White Light Sensing with IR Blocking Filter
2. Programmable Analog Gain and Integration Time
3. 3,800,000:1 Dynamic Range
4. Very High Sensitivity ? Ideally Suited for Operation Behind Dark Glass
5. Maskable Interrupt
6. Programmable Upper and Lower Thresholds with Persistence Filter
7. Power Management
8. Low Power ? 2.5-uA Sleep State
9. 65-uA Wait State with Programmable Wait State Time from 2.4 ms to > 7 Seconds
10. I2C Fast Mode Compatible Interface
11. Data Rates up to 400 kbit/s
12. Input Voltage Levels Compatible with VDD or 1.8 V Bus
13. Register Set and Pin Compatible with the TCS3x71 Series
14. Small 2 mm*2.4 mm Dual Flat No-Lead (FN)
Applications
1. RGB LED Backlight Control
2. Light Color Temperature Measurement
3. Ambient Light Sensing for Display Backlight Control
4. Fluid and Gas Analysis
5. Product Color Verification and Sorting
 
Package Included
1 Pcs TCS34725 Color Sensor Module
 

KVM double line USB printing cable VGA cable KVM switch dedicated cable
Description:
1.Cable length about 1.5 m 
2.Manufatured with high quality special server wires
3.Data tranmission safe and stable
Package included:
1 Pcs KVM double line USB printing cable VGA cable KVM switch dedicated cable
 

Description:
Light power: <5mW
Supply Voltage: 3VDC
Operating Current: <25mA
Laser wavelength: 650nm (Red)
Spot mode: dot facula, continuous output
Operating temperature: -36 ~ 65 Celsius Degree
Working life: more than 1000 hours
 
Package Included
10 Pcs 650nm 6mm 3V 5mW Laser Dot Diode Module

Hall Sensors Module 3144E Hall Switch Speed Magnetic Swiches Speed Counting Sensor Module For Uno Smart Car
Product features:
1 working voltage: 3.3--5V
2 using 3144E switch type Holzer sensor.
3 when the sensor sensor to the magnetic field, the digital output low, the signal light is bright; if no induction to the magnetic field, then the digital output high level, the signal light is not bright.
4 with power indicator and signal indicator.
5 output mode: digital switching output (0 and 1) AO port is not valid
6 LM393 comparator output, model clean, good waveform, strong driving ability, more than 15mA.
7 Fixed bolt hole is provided, which is convenient for mounting and fixing.
8 can be used for motor speed, position detection, etc..
Sensor function introduction:
3144 Hall switch integrated circuit based on Hall effect principle, the use of manufacturing semiconductor integrated technology of magnetic sensing circuit, it is by voltage adjusting device, Hall voltage generator, differential amplifier, Schmitt trigger, temperature compensation circuit, and an open collector output stage is composed of a magnetic sensing detection circuit. The input for the magnetic induction intensity, the output is a digital voltage signal.
The sensor has the following characteristics: small size, high sensitivity, fast response, good temperature performance, high accuracy, high reliability.
Connection description:
1, VCC - power cathode
2, GND - power cathode
3, DO - TTL digital output
4, AO - analog output (different distance to the output of different voltage)
Shipping list : 
5 Pcs Hall Sensors Module

Small Volume Isolated Switching Power Supply 12V Module Precision 12V300MA 3w AC-DC Buck Module 220 To 12V Switch Power

Description
1. The product is easy to install, can be used directly on the motherboard board.
2. Universal universal input voltage: 85-264V AC or 110-370V DC.
3. High output voltage accuracy.
4. Input and output high isolation.
5. Overcurrent protection, short circuit protection and temperature protection.
Product parameters:
AC input (VAC): 85-264
DC input (VDC): 110-370
Frequency range (Hz): 47-63
Input current (A): 0.3 / 115VAC 0.15 / 230VAC
Surge current (A): cold start 10A / 230VAC
Standby power consumption (mW) ≤100mW / 230VAC
Output voltage: 12V
Output voltage accuracy: ± 1%
Rated current: 0.3A
Rated power: 3W
Working temperature: -30-70 ℃
Working humidity: 20-90% , no condensation
Switching frequency: 5-65
Product Size: 4 * 1.5 * 1.8cm
Package Included
1 Pcs 12V300mA Switching Power Supply Module

 
Mini DC12V Led Controller Dimmer 12A Wireless RF Remote To Control Single Color Strip Lighting 3528 5050 Led Strip
 

 
Description:
Control:Brightness, flashing, flashing modes     
Working voltage:DC 5-24V     
Remote controll mode:433.92MHz     
Output current:peak 12A     
Remote distance:less than 15m at open area     
RF remote controller:11 keys     
Used for single color led strip     
Color:As shown
 
Package Included:
1 Pcs RF 12v light bar controller
 

 
FM Radio Module TEA5767 Information
 
 
Description
Built-in for Philips TEA5767 FM IC.
High sensitivity with integrated low-noise RF input amplifier.
Frequency range: 76 Mhz-108 Mhz.
Suitable for handheld applications.
Built in 32.768khz clock crystal.
Radio modules are widely used in consumer electronic audio-visual products,For example, MP3 PLAYER, MD, CD/MP3, PLAYER,PORTABL
VCD / DVD, MOBILE PHONE, PDA, electronic dictionary,digital refrigerator, car audio.
 
Package Included
1 Pcs TEA5767 Module

 
FM Radio Module TEA5767 Information
 
 
Description
Built-in for Philips TEA5767 FM IC.
High sensitivity with integrated low-noise RF input amplifier.
Frequency range: 76 Mhz-108 Mhz.
Suitable for handheld applications.
Built in 32.768khz clock crystal.
Radio modules are widely used in consumer electronic audio-visual products,For example, MP3 PLAYER, MD, CD/MP3, PLAYER,PORTABL
VCD / DVD, MOBILE PHONE, PDA, electronic dictionary,digital refrigerator, car audio.
 
Package Included
1 Pcs TEA5767 Module

Mini 0.56 inch Voltmeter LCD Digital display Voltage Meter Panel Portable Tool with two wire AC 70V-500V
Description:
The voltage this meter detects can be used as the power supply for the meter, so there is unnecessary to connect other power supply.
It is easy and convenient to be connected and installed.
The input voltage cannot outnumber 500V, otherwise, this meter will be destroyed.
Specifications: 
Range: AC 70-500V.
Max input: 500V.
Allowable error: more or less 1 percent.
Input resistance: more than 1mohm.
Current: 23mA(max).
Refresh rate: 1 time per 300ms.
Display: three-digital Led.
Color of LED: Red/Green/Blue
Length of wire: 15cm.
Size: 48*29*22mm.
Net weight: around 20g
Package included:
1 Pcs 0.56 Digital Voltage Meter

Mini 0.56 inch Voltmeter LCD Digital display Voltage Meter Panel Portable Tool with two wire AC 70V-500V
Description:
The voltage this meter detects can be used as the power supply for the meter, so there is unnecessary to connect other power supply.
It is easy and convenient to be connected and installed.
The input voltage cannot outnumber 500V, otherwise, this meter will be destroyed.
Specifications: 
Range: AC 70-500V.
Max input: 500V.
Allowable error: more or less 1 percent.
Input resistance: more than 1mohm.
Current: 23mA(max).
Refresh rate: 1 time per 300ms.
Display: three-digital Led.
Color of LED: Red/Green/Blue
Length of wire: 15cm.
Size: 48*29*22mm.
Net weight: around 20g
Package included:
1 Pcs 0.56 Digital Voltage Meter

Mini 0.56 inch Voltmeter LCD Digital display Voltage Meter Panel Portable Tool with two wire AC 70V-500V
Description:
The voltage this meter detects can be used as the power supply for the meter, so there is unnecessary to connect other power supply.
It is easy and convenient to be connected and installed.
The input voltage cannot outnumber 500V, otherwise, this meter will be destroyed.
Specifications: 
Range: AC 70-500V.
Max input: 500V.
Allowable error: more or less 1 percent.
Input resistance: more than 1mohm.
Current: 23mA(max).
Refresh rate: 1 time per 300ms.
Display: three-digital Led.
Color of LED: Red/Green/Blue
Length of wire: 15cm.
Size: 48*29*22mm.
Net weight: around 20g
Package included:
1 Pcs 0.56 Digital Voltage Meter

10 Pcs Roller Lever Arm SPDT NO/NC Momentary Micro Switches V-156-1C25
Description:
Note: Please pay attention to the working voltage and check with the voltage of your place to make sure this micro switch successfully work.
3 pins, push button actuator with bracket,  applicable to AC DC control circuits.
Designed to control the movement of a mechanical part.
High precision mechanism design offering acute operation and long life.
Main Color:Black, Red
Lever Length:28mm/1.1"
Action Type:Momentary
Country of Manufacture:CHINA
Actuator Type:R Hooked Lever
Model:V-156-1C25
Material:Plastic, Metal
Contact Configuration:SPDT 1NO 1NC
Product Name:Micro limit Switch
Net Weight:70g
Main Body Size:28 x 16 x 10mm/1.1" x 0.6" x 0.4"(L*W*H)
Rating:AC 250V/7.5A, 125V/15A, DC 125V/0.6A, 250V/0.3A
MPN:Does not apply
Package Included:
10 Pcs Momentary Micro Switches V-156-1C25