Relék

Phase Sequence Protection Relay JVRD-380 Voltage Monitoring Relay With 5
Features:
Standard modular construction and guide rail type installation.
Three-phase monitoring of phase sequence, phase loss, over- and undervoltage and phase unbalance.
Powered by the measuring circuit, not required additional auxiliary power.
Two groups normally open/close contacts.
With 5 indicator light to indicate all kinds of working status.
Applicable to pumps, fans, blowers, motors elevator, crane, central air-conditioning, etc.
Specification:Condition: 100% Brand New
Material: Plastic, Metal
Color: As Picture Shown
Model: JVRD-380
Rated voltage: 380VAC, 50/60hz
Interrupting capacity: 250VAC
Contact capacity: 6A/250VAC
Rated current: 3A
Monitoring circuits: L1,L2,L3
Installation: 35mm guide rail
Product certification: ISO9001
Overall Size: 7.9 * 2.3* 7.9cm/3.1 * 0.9 *3.1in
Package Weight: Approx. 120g/4.2oz
Package List:1 * Phase Sequence Protection Relay

Feature:1. Relay supports six working modes including on, off, jog, self-lock, interlock and delay.
2. Meanwhile, there are for instruction (default) and AT instruction two instruction control modes.
3. The maximum delay is 255 seconds for , and the maximum delay is 9999 seconds under the AT .
4. For mode, such relay can support up to 64 equippment in parallel.
5. AT can be input by serial port super terminal (serial port assistant). For can be input by "for Poll" in addition to serial port super terminal input.
Specification:
Item Type: Relay
Working Voltage: DC 12V
Working Current: standby 12MA, 1 relay on 40MA, 2 relays on 68MA, 3 relays on 94MA, 4 relays on 120MA, 5 relays on 148MA, 6 relays on 174MA, 7 Relay on 199MA, 8 relays on 224MA
Default Baud Rate: 9600BPS
Select Baud Rate through Jumper: 2400, 4800. 19200BPS
Size:
Approx. 100 x 72 x 20mm / 3.94 x 2.83 x 0.79in(circuit board)
Approx.120 x 88 x 42mm / 4.72 x 3.46 x 1.65in (box with rail)
DIN Rail Box Parameters:Product Model: UM72
Color: Green
Width: Suitable for circuit board width UM72 (inside 72)
Insulation Class: Flame retardant VO level
Base Plate Length: Suitable for 10 cm circuit board
Net Weight: Approx. 72 g / 2.5 oz
Installation Method: DIM35 and C45 rail
Weight:Approx.120 g / 4.2 oz(circuit board)
Approx.198 g / 7 oz(box with rail)
Maximum Load: 10A / 250VAC, 10A / 125VAC, 10A / 30VDC, 10A / 28VDC, 10A / 12VDC
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x 8-Channel RS485 Relay

Features:
1. This is a multifunctional time relay and time delay can be set by panel knob.
2. With 10 kinds of delay functions including delay on, delay off, cycle delay and so on.
3. Super wide time delay setting range of 0.1s - 10days.
4. Relay working status is indicated by LED indicators.
5. With super small volume, this relay can be mounted on 35mm DIN rail.
6. This time relay can be used for industrial equipment, lighting control, heating control, motor, fan control and more.
Specification:
Rated power supply voltage: AC/DC 12V~240V (50-60Hz)
Power terminal: A1-A2
Power consumption: AC0.09-3VA/DC0.05-1.7W
Setting method: knob
Setting accuracy: 10%
Power indicator: Green LED
Delay range: 0.1s-10 days, normally open, normally
Repeated accuracy: 0.2%
Temperature fluctuation error: 0.05% /℃, at = 20℃
Output contact: 1 x SPDT, 250VAC/24VDC
Minimum switching power: 500mW
Output relay indication: red LED
Mechanical life: 1x107
Reset time: Max 200ms
Working temperature: -20℃~55℃
Mounting method: 35mm DIN rail
Mounting altitude: ≤2000m
Weight: Approx. 75g/2.6oz
Package list:
1 * Multifunctional Delay Time Relay
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:
Standby current (all relays ) 12MA, 1 relay open 40MA, 2 relays open 67MA, 3 relays open 95MA, 4 relays open 121MA, 5 relays open 147MA, 6 relays open 173MA, 7 relays open 198MA, 8 relays open 223MA
Open, Close, Momentary, Self-locking, Interlock, Delay, 6 Commands.
Under the Delay , the maximum delay is 255 seconds.
DC 12V power supply (voltage range 9-13V).
This 8 Channel 12V Relay Module, able to control various appliances.
Specifications:Power supply: DC 12V
Voltage range: 9-13V
Maximum load: 10A / 250VAC, 10A / 125VAC, 10A / 30VDC, 10A / 28VDC, 10A / 12VDC
Quantity: 1pc
Size: Approx. 90 x 63 x 18mm / 3.54 x 2.48 x 0.7inch
Weight: 115g
Note: Please contact us for instruction.
Package Included:1 x 8 Channel RS485 Relay Module

TSR-10DA-H SSR 3-Phase 10A DC-AC Solid State Relay SSR Input 3-32VDC Load
Features:
This solid state is composed of engineering plastic case, base heat , circuit board, thyristor and optoelectronics.
Widely used in computer peripheral interface device, CNC machinery, industrial automation device, traffic light and more.
High quality solid state relay, explosion-proof, anti-moisture and anti-corrosion.
No switching spark, high switching speed.
Stable performance, long service life.
Specification:
Model: TSR-10DA-H
Control type: DC to AC
Rated current: 10A
Control voltage: 3-32VDC
Load voltage: 24-480VAC
Control current: ≥10mA
Withstand voltage: 2000VAC
On-state voltage drop: ≤1.5V
Off-state leakage current: ≤5mA
On time: ≤10ms
Ambient temperature: -30°C~70C
Package Weight: Approx. 328g/11.6oz
Package list:
1 * Solid State Relay

Features:
1. This is a multifunctional time relay and time delay can be set by panel knob.
2. With 10 kinds of delay functions including delay on, delay off, cycle delay and so on.
3. Super wide time delay setting range of 0.1s - 10days.
4. Relay working status is indicated by LED indicators.
5. With super small volume, this relay can be mounted on 35mm DIN rail.
6. This time relay can be used for industrial equipment, lighting control, heating control, motor, fan control and more.
Specification:
Rated power supply voltage: AC 220V (50-60Hz)
Power terminal: A1-A2
Power consumption: AC max.6VA/1.9W
Setting method: knob
Setting accuracy: 10%
Power indicator: Green LED
Delay range: 0.1s-10 days, normally open, normally
Repeated accuracy: 0.2%
Temperature fluctuation error: 0.05% /℃, at = 20℃
Output contact: 2 x SPDT, 250VAC/24VDC
Minimum switching power: 500mW
Output relay indication: red LED
Mechanical life: 1x107
Reset time: Max 200ms
Working temperature: -20℃~55℃
Mounting method: 35mm DIN rail
Mounting altitude: ≤2000m
Weight: Approx. 96g/3.4oz
Package list:
1 * Multifunctional Delay Time Relay
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:
Delay can be set directly by the potentiometer, convenient and intuitive.
Multi-voltage timer with 7 knob-selectable functions and 7 knob-selectable time ranges within 0.1s and 100h.
Housing 17.5mm wide for SPDT version and 35.5mm for DPDT version, suitable both for back and front panel mounting.
Combined AC and DC power supply.
LED indication for relay status and power supply ON.
Automatic or manual start.
Specifications:Rated Voltage: DC 24V / AC 24-240V
Rated Current: 5A
Selectable time range: 0.1s to 100h
7 knob selectable functions:Op: delay on operate
In: interval
Io: interval on trigger open
Id: double interval
Dr: delay on release
R: symmetrical recycler ON first: symmetrical recycler OFF first
Repeatability: ≤0.2%
Output: 5 A SPDT or 5 A DPDT relays
Weight: Approx. 72g
Package Included:1 x Time Relay

Feature:
1. Bidirectional thyristor isolated expansion board and dual channel thyristor control output is specially designed for .
2. Better than relays, the product is featured with high efficiency, no mechanical noise and wear, faster response , adjustable output.
3. The built-in STM32F0 microcontroller supports control, and the operation is simple. Onboard STM32F030 microcontroller, which can directly send control, reduce the difficulty of development and use, respond faster, and save for resources
4. High-efficiency communication is faster, UART communication rate is up to 921.6kbps, l2C communication rate is up to 1024kbps.
5. High power output without pressure, under good heat dissipation conditions, can up to 4400W. And there is optocoupler isolation to avoid high voltage circuit interference.
Specification:
Item Type: Expansion Board .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
AC Voltage: 100~600V
UART Communication Rate: 1.2~921.6kbps
AC Current: 0~20A
I2C Communication Rate: 1024kbps
Communication Protocol: 12C/UART
Controller: STM32F030
Logic Supply Voltage: 3.3V/5V
Package List:
1 x 2- TRIAC HAT
1 x Screw Package

Features:
1. Automatically switch the power of various electrical equipment according to the customer's fixed time.
2. Large screen make it clear to see the reading.
3. Adopt light control induction principle sound, it can provide stable performance.
4. Made of high quality material, durable and long service life.
5. Widely used in programmable control of rice cookers, boosters, lamps, water heaters, sprayers, filling machines, preheaters, agricultural facilities, broadcasting equipment, etc.
Specification:
Condition: 100% Brand new
Model: ZYT15-GK
Working Voltage: 90-250V
Induction Principle Sound: Light control induction
Package List:
1 x Controller
1 x Connecting Cable
Operational Highlights:
1. After the power is turned on, the screen will display continuously. Press the SET LCD field to switch the segment to blink. When flashing, select the required parameter by adding or subtracting the button.
2. The working mode area ON indicates that it is always on, OFF indicates that it is always off, and 1 2 3 4 5 from small to large indicates that the brightness changes from dark to bright.
3. The semicircle on the left corresponds to the subdivision ratio of 1 2 3 4 5 photosensitivity. Select 1 and the semicircle displays a grid indicating the darkest photosensitivity.
4. The number here on the semi-circle edge indicates the light control delay, that is, the motion is delayed after a certain period of time after sensing the light change.
5. The number on the far right hour here indicates the working time, that is, how many hours after the dark start delay
6. Pay attention to the wiring mode of the output. This product is the contact switch output.

Features:
Three phase voltage protector, chronograph and counter are integrated into one relay.
It is equipped with protective functions for over-voltage, under-voltage, loss of phase, phase sequence and unbalanced three phase voltage.
No external power requires.
With useful functions: electricity delay, output test, etc.
The LCD can show the data for easy reading.
2 rest module optional, manual and automatic.
Specification:Model: JVR 800-2
Monitoring Circuit: , L2, L3
Rated voltage: 208-480V AC, 50/60Hz
Protection: over-voltage, under-voltage, voltage unbalance, phase loss, phase sequence, counter
Overvoltage setting range: 200-600V
Undervoltage setting range: 150-500V
Voltage hysteresis: 1-20V
Delay time for overvoltage and undervoltage: 0.1-30s
Voltage unbalance ratio: 1-50%
Voltage unbalance hysteresis: 1-10%
Voltage unbalance delay time: 0.1-30s
Delay time for phase loss: 0.1-30s
Delay time for phase sequence: 0.1-30s
Start delay time: 0-999s
Auto reset mode: ON/OFF
Auto reset time: 0.1-999s
Timer and counter input: AC/DC 80-450V
Indicators: LCD indicating voltage,current,operation status
Output contacts: 1 C/O,1NC
Contact capacity: 6A ,250VAC
(H*W*D): 80*43*54mm/3.15*1.69*2.12inch
Mounting: suitable for 35mm rail
Weight: 129g
Package List:1 x 3 Phase Voltage Monitoring Relay

MMDVM DMR Repeater Digital Voice Modem Relay Board Fit for Raspberry Pi Arduino
Features:1. This board needs to cooperate Raspberry Pi PI3, orange pie, a variety of school development board to use.
2. This board has been applied in the GM300 GM3188 3688 950I 338 Vitex DR-1X, other types of repeaters and car stations need to be studied yourself.
3. The MMDVM is intended to be an open-source Multi-Mode Digital Voice Modem, which utilities the power of an ARM processor and a simple analogue interface board.
4. The Multi-Mode Digital Voice Modem is a combined hardware and software development of a modem to handle all amateur digital voice modes. Initially it will support D-Star and DMR, with System Fusion and P.25 coming later, as well as a built-in FM repeater controller. For all modes other than DMR and FM, the modem can be used in simplex or duplex mode, while for DMR and FM full duplex must be used.
5. The MMDVM is aimed at the Arduino Due, Teensy 3.1/3.2 and mbed platforms, the only requirement for the hardware is to be ARM Cortex-M3, M4, or M7 based, and access to interrupts and ADC and ADC ports as well as digital signalling ports.
Specification:Size: about 6.6*5.7*2cm/2.6*2.24*0.79in
Color: Green
Material: PCB
Package List:1 * Relay Board for Raspberry Pi
1 * Moto Cable
2 * Adapter
1 * Instruction Manual
Note: It can't work for Raspberry Pi 3B , can't use the nextion LCD display.

DC 12V 8 Channel Relay Switch Module Board Controller with Metal Housing USB 10A
Feature:1. Onboard square USB interface, stable connection, double high current track.
2. Fine workmanship, adopts imported high performance USB control chip.
3. Military printed circuit board manufacturing, additional printed circuit board opening can achieve better voltage isolation.
4. Made of high quality material, sturdy, durable and long service life.
5. Small size and lightweight, easy to carry and store, convenient to use.
Specification:
Condition: 100% Brand New
Item Type: Module
Material: Printed Circuit Board
Optional Color: Silver, Black
8 Channel SPDT Relay SRD-12VDC-SL-C
Relay Specification: 10A 250VAC / 10A 125VAC / 10A 30VDC / 10A 28VDC
Power Supply: 12 VDC
Current Consumption: 300 mA
Printed Circuit Board ParameterFor FR4/1.5mm /Two-Layer/Metalizing Hole/HAL/White Stamp/Solder Resist
Weight: Approx. 222g
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Module
1 x Metal Shell
1 x Screw Kit

Features:
Ethernet TCP/IP RJ45 port, IP port can be modified.
WEB server allows accessing and controlling the relay via WEB.
8-Channel 250V/AC 10A relay control individually.
8 external control outputs and active low level can control switch or sensor, etc.
Provide protocol for re-engineering, when connected to router, it allows access control via Android, Tablet, Windows system from anywhere in the world with network.
Supports status return, can display current status of the relays
With Reset function, short press to reset, long press to restore factory setting.
Supports485 networking.
Supports Internal circuit protection, with optocoupler to prevent from external voltage surge.
Specifications:
Color: White, Black (Optional)
Operating Voltage: 9V~40V DC
Load Capacity: 250V/AC 10A
Size: 145*90*40mm/5.7*3.54*1.57"
Note: It is suggested to use intranet instead of external control, otherwise it may lack in security.
Package Includes:
1 x Controller Module
1 x Protective Cover
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Feature:1. Using high‑quality flame retardant materials, strong insulation, safe and durable
2. The terminal performance is stable, with high conductivity material, stable and safe
3. The product has an aluminum bottom plate to enhance heat dissipation, and will not easily damage the product during operation
4. Great workmanship and processing, perfect replacement for the old or damaged one
5. The size is 105x73x36mm which is easy to install and remove, the maximum load can be up to 60A
Specification:
Item Type: State Relay
Brand: BERM
Maximum Load: 60A
Input Current: 3-32A DC
Material: Aluminum alloy
Control Voltage: 30-480V AC
Size: Approx. 105 x 73 x 36mm / 4.1 x 2.9 x 1.4in
Size: Approx. 105 x 99 x 79.5mm / 4.1 x 3.9 x 3.1in
Size: Approx.
94mm / 3.7in
5.5mm / 0.2in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px #000; border-left: 1px #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px #000; border-right: 1px #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x State Relay

Feature:1. Supports wide application, state relay can be easy and convenient to operate.
2. Professional and simple helps state relay with stable performance, which supports high durability and stability.
3. 3‑phase state relay is equipped with built‑in protection that can prevent overvoltage, overcurrent and short circuit.
4. Better maintain long‑term operation all due to SSR's large heat dissipation area.
5. And better conductivity and more resistant to corrosion terminals supports high‑quality and high practicality.
Specification:
Item Type: state relay
Brand: BERM
Model: BERM-303238 200Z-150Y-CT
Input Current: Larger than 5mA
On-off Time: ≤10mS (millisecond)
Load Voltage: 24-480VAC
Rated Maximum Current: 200A
On-State Voltage Drop: ≤1.5V
Minimum on Current: 50mA
Insulation Voltage: ≥2500V
Insulation Resistance: ≥100MΩ
Working Temperature: -35～75℃
Power Frequency: 50/60HZ
Size:Approx. 110mm / 4.3in
Approx. 125mm / 4.9in
Approx. 136mm / 5.4in
Approx. 92mm / 3.6in
Approx. 48mm / 1.9in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px #000; border-left: 1px #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px #000; border-right: 1px #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x State Relay
1 x Fastening Kit Set

Feature:1. The aluminum base is used to increase the heat dissipation area and effectively dissipate heat.
2. High‑quality components comprehensively improve product stability and safety
3. The use of flame retardant materials is safer, no need to worry about fire due to circuit short circuit
4. With great workmanship, can perfect meet your demands, very practicality
5. Using high‑quality materials, strong and durable, has a long service life
Specification:
Item Type: BERM Solid State Relay
Brand: BERM
Maximum Load: 400A
Input: 4-32VDC
Control: 30-480VAC
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Solid State Relay
1 x Fastener Set

100% Brand New and High Quality
This is a 12V Conduction delay relay module
- This is a brand new and high quality delay turn-on module.the use of high-performance timing CPU design.
- The power indicator LED and trigger timing indication LEDS;
- The output can be connected to AC 250V 10A or DC 30V 10A load;
- There is the chronopotentiometry regulation time, adjustable from 0 to 10 seconds by default, or by changing the capacitance adjustment time longer
For applications of:Vehicle equipment-delay to prevent car ignition, prevention of high sudden current to burn components and devices.
Parameter:1.Module based on: NE555 chip
2.Delay modue:delay connect module
3.Input voltage: DC12V
4.Control voltage: AC 0-250V/max 10A, DC 0-30V/max 10A, the operating voltage: 12V DC; (otherwise 12V optional)
5.Max load: 2200W
Main Chip (NE555) Characteristics:1.Timing from microseconds to long hours
2.Simple circuit design
3.Precision Pulse Generation / Timing
4.Adjustable Duty Cycle
5.Countless Application and Information Sources
Package Included:1 x 12V Delay Timer Module

Description:Description:100% New with High Quality
Colour: Black
Size: like the picture shown
Voltage: 12V
Current: 40A
Contact Type: SPST
Material: Metal, Plastic
Pin Number: 4 Pin
Note:The Contacts on this relay is normally open (NO)
SPST contact type
Durable
12V DC rated voltage
It is used when a device draws heavy amperage such as car alarms, remote starts, HID headlights, pop doors, trunk releases strobe lights, fog lights, stereos, fans, air horns, and much more.
NOTE
1.As different computers display colors differently, the color of the actual item may vary slightly from the above images.
2. Please allow 1-3 CM differs due to manual measurement.
Thanks for your understanding.
Package include:1 X Car Relay
SKU:QPJ6882
Preview:

100% Brand New and High Quality
This is a 12V Conduction delay relay module
- This is a brand new and high quality delay turn-on module.the use of high-performance timing CPU design.
- The power indicator LED and trigger timing indication LEDS;
- The output can be connected to AC 250V 10A or DC 30V 10A load;
- There is the chronopotentiometry regulation time, adjustable from 0 to 10 seconds by default, or by changing the capacitance adjustment time longer
For applications of:Vehicle equipment-delay to prevent car ignition, prevention of high sudden current to burn components and devices.
Parameter:1.Module based on: NE555 chip
2.Delay modue:delay connect module
3.Input voltage: DC12V
4.Control voltage: AC 0-250V/max 10A, DC 0-30V/max 10A, the operating voltage: 12V DC; (otherwise 12V optional)
5.Max load: 2200W
Main Chip (NE555) Characteristics:1.Timing from microseconds to long hours
2.Simple circuit design
3.Precision Pulse Generation / Timing
4.Adjustable Duty Cycle
5.Countless Application and Information Sources
Package Included:1 x 12V Delay Timer Module

Description:
Specification:
Brand new
Material: metal plastic
Size: approx. 37*25mm
Operating Voltage: DC 5V
Communication: WIFI (module ESP8266)
Transmission range: the maximum transmission range of 400m (open environment, mobile phone equipped with WIFI module)
Load: 10A / 250VAC 10A / 30VDC, the relay pulls 100,000 times
Feature:
This wireless relay is based on the AI-Thinker ESP-01S WIFI module.
Designed for smart home, internet of thing and other DIY project.
With this smart relay, you can easily control your smart switch to control any device on your phone anywhere.
Support the source code of APP and LUA.
Fine workmanship and good performance.
Easy to use.
Long service life.
Package included:
1 x Smart Home Relay Module
Note:
Please allow 1-3mm errors due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
Preview:

Feature:
This fully-featured UDA1334A I2S Stereo DAC breakout is a perfect match for any I2S-output audio interface.
3.3V - 5V logic levels (a rarity), and can process multiple different formats by setting two pins to high or low.
The DAC will process data immediately, and give you a clear, analog, stereo line level output.
It's even cool with MCLK-less I2S interfaces such as the Raspberry Pi (which it's ideal for) - a built in PLL will generate the proper clock from the incoming signal.
For inputs, you can use classic I2S (the default) or 16-bit, 20-bit or 24-bit left justified data. You can set it up to take an input system/master clock but we default-set it to just generate it for you, so you only need to connect Data In, Word Select (Left/Right Clock) and Bit Clock lines. If you want, there's a mute pin and a de-emphasis you can turn on.
Package includes:
1 x CJMCU-1334 UDA1334A I2S Audio Stereo Decoder Module

What this photosensitive resistor module can do: Automatic light detection, brightness detection, potentiometer can adjust the detection brightness valve point, and bring its own relay and delay function. When the light is darker than the brightness adjusted by the potentiometer, the relay switch is automatically turned on, and the light detection alarm can be done. , light control delay switch, brightness detection switch, can control various street lights, automatically turn on at night, automatic extinguishing during the day and auto headlights, stage lighting, , traffic light detection switch, product with delay adjustable and adjustable light sensitivity Function, light sensing without flicker.
Features:
Photosensitive Resistor Module - Stable and reliable quality.
Diode protection - The power supply part has diode protection, filter capacitor and anti-interference capacitor and 7805 voltage regulator chip, which can provide stable voltage and prevent the power supply from being reversed, and burn out the module.
Equipped with a precision adjustable potentiometer to better adjust the sensitivity and delay time.
There is a power indicator and a relay pull-in indication.
Equipped with a high-power relay to control the 10A current load.
The module comes with a 50cm long photoresistor sensor.
Comes with delay, which can adjust the delay time to solve the problem of the flashing of the relay at the point of the light.
Specification:Type: XH-M131 Photosensitive Resistor Module
Power supply: DC12V
Quiescent current: 15mA
Power consumption: 45mA
Relay load capacity: 30V 10A (DC)
Ambient temperature: < 80℃
Delay range: plug in . Delay 1-20 seconds adjustable, not inserted , 1-200 seconds adjustable.
Weight: Approx. 28g
Size: Approx. 53 * 30 * 18.5mm / 2.1 * 1.2 * 0.7in
Package list:1 * XH-M131
Instructions:1. Product wiring: first connect DC power supply to DC and DC- (such as 5V DC power supply if 5V). If the relay is to control 220V AC or different from the module power supply, please follow the first connection. If the relay is the same power source as the power supply, it can be simpler according to the second connection method;
2. Plug in the sensor probe and connect it to the DC power supply (to that the voltage meets the requirements, the polarity can NOT be reversed);
3. Delay adjustment method: The time range of plugging the jumper is 1-20 seconds, the time is not inserted is 1-200 seconds, the delay potentiometer will adjust the clockwise time longer, the reverse time will be shorter, when the sensitivity is adjusted , must adjust the delay to the shortest delay time of about 1 second (counterclockwise adjustment of about 10 circles);
4. Adjusting the sensitivity of the sensor: Adjust the sensitivity potentiometer in the light environment. If the sensor is used to cover the sensor head, the relay will pick up, let go of the delay and the relay is disconnected, and the module has the sensing function. If you want to adjust the sensitivity, adjust clockwise, the more sensitive the induction will be, the adjustable light will start the relay when it is dim, and the counterclockwise will adjust to the time when the light is in the relay, the relay will not pick up.
5. Delay time adjustment method: When clockwise adjustment, the delay time is extended.
Note: This connection can NOT be inserted into jumper , otherwise the module will be burned out.
Note:
This connection can NOT be inserted into jumper S1, otherwise the module will be burned out.
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

Model: JQC-3FF;
Size: 19.2 * 15.4*15.4mm;
Contact form: conversion type;
Contact load: 15A / 125VAC 10A / 250VAC;
Number of pins: 5pcs;
voltage: 5VDC
Color: blue,black
Material: metal
Package Contents: 1 * JQC-3FF T73 relay
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Model: JQC-3FF;
Size: 19.2 * 15.4*15.4mm;
Contact form: conversion type;
Contact load: 15A / 125VAC 10A / 250VAC;
Number of pins: 5pcs;
voltage: 5VDC
Color: blue,black
Material: metal
Package Contents: 1 * JQC-3FF T73 relay
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Model: JQC-3FF;
Size: 19.2 * 15.4*15.4mm;
Contact form: conversion type;
Contact load: 15A / 125VAC 10A / 250VAC;
Number of pins: 5pcs;
voltage: 5VDC
Color: blue,black
Material: metal
Package Contents: 1 * JQC-3FF T73 relay
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Product Name : Electromagnetic Relay;Model No. : HH52P;Coil Voltage : AC 110/120V
Contact Capacity : Contact Capacity;5A 250VAC,5A 280VDC : 5A 250VAC,5A 280VDC;Type : DPDT
Pin Quantities : 8;Pin Width : 3mm/0.1";Overall Size (No Include Pin) : 21 x 27 x 35mm/0.8" x 1.1" x 1.4"(L*W*H)
Shell Material : Plastic;Main Color : Clear Blue, Black
Net Weight : 29g
8 flat pins, DPDT 2NO 2NC type, clear plastic housing.
Can adjust automatically, protect and transform the electric circuit.
Used widely in the remote control, communication, automatic control system, electronic equipments, etc.
Package Content : 1 x Electromagnetic Relay
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Product Name : Electromagnetic Relay;Model No. : HH52P;Coil Voltage : AC 110/120V
Contact Capacity : Contact Capacity;5A 250VAC,5A 280VDC : 5A 250VAC,5A 280VDC;Type : DPDT
Pin Quantities : 8;Pin Width : 3mm/0.1";Overall Size (No Include Pin) : 21 x 27 x 35mm/0.8" x 1.1" x 1.4"(L*W*H)
Shell Material : Plastic;Main Color : Clear Blue, Black
Net Weight : 29g
8 flat pins, DPDT 2NO 2NC type, clear plastic housing.
Can adjust automatically, protect and transform the electric circuit.
Used widely in the remote control, communication, automatic control system, electronic equipments, etc.
Package Content : 1 x Electromagnetic Relay
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

1X(the output drive capacity: 250VAC-10A, 125VAC-10A, 30VDC-10A, 28VDC-10A;
easy to use, each output simple 3-wire structure, set aside 6 output terminals;
the input is connected directly with the single-chip IO port or digital circuit, input high level relay pull-in, input low level relay release;
the working voltage 5V, pull-in current about 70mA each way, with the relay status indicator;
the whole chip components, the most reasonable drive circuit design, the use of 8050 transistor drive relay action;
with a fixed screw hole for easy installation
Color: blue,black
Material: metal
circuit board size 1.8cm * 4.0cm * 1.9cm
weight 15g;
Simple Test Description: The module input and output electrical insulation, for the correct voltage on the corresponding, simply plug in the input pin high (such as short circuit with VCC) can pull the relay, do not pick or connect low (Such as short circuit with GND) Relay does not operate.
Package Contents: 1 X relay module
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.)

Indicator light: green for switch, red one for power.
Built in a potentiometer for sensitivity control.
Can be used as a single chip minicomputer board module, also can be used as a home appliance control.
Product Name : Relay Module
Output Channel : 1
Trigger Mode : Low Level
Working Voltage : 5V
Relay Load Voltage : AC 125V/250V 10A,DC 28V/30V 10A
Total Size : 43 x 17 x 19mm/ 1.7" x 0.67" x 0.75"(L*W*T)
Material : Electronic Components, Plastic
Package Content : 1 x Relay Module
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.The measurement allowed error is /-1-3 cm.

the output drive capacity: 250VAC-10A, 125VAC-10A, 30VDC-10A, 28VDC-10A;
easy to use, each output simple 3-wire structure, set aside 6 output terminals;
the input is connected directly with the single-chip IO port or digital circuit, input high level relay pull-in, input low level relay release;
the working voltage 5V, pull-in current about 70mA each way, with the relay status indicator;
the whole chip components, the most reasonable drive circuit design, the use of 8050 transistor drive relay action;
with a fixed screw hole for easy installation
Color: blue,black
Material: metal
circuit board size 1.8cm * 4.0cm * 1.9cm
weight 15g;
Simple Test Description: The module input and output electrical insulation, for the correct voltage on the corresponding, simply plug in the input pin high (such as short circuit with VCC) can pull the relay, do not pick or connect low (Such as short circuit with GND) Relay does not operate.
Package Contents: 1 X relay module
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

1,the control area and the load area have isolation tank;
2, the use of pine music authentic relay;
3, with power supply and relay indicator, pull off bright, bright;
4, signal input signal, the public side and often start will lead;
5, can be used as a microcontroller development board module, can be used as a home appliance control;
6, control the DC or AC signals, can control the 220V AC load;
7, there is a normally open and a normally closed contact;
8, blue KF301 terminal connected to the control line is more convenient.
On the high level and the low level of the trigger instructions, do not understand the friend please look at:High level trigger refers to the signal input terminal and the ground between the trigger mode, can be understood as the signal input and VCC cathode short-circuit trigger a way;
Low level trigger refers to the signal input terminal and the voltage between the ground for the OV trigger mode, can be understood as a signal input terminal and GND negative short-circuit trigger a way
colour:red
Material:Metal pc
size:50*26*17mm
Package Contents:1* 1 road relay module

2017 DC 12V Delay Relay Shield Timer Switch Adjustable Module 0 To 10 Second
Features:
*This is a 12V Delay Adjustable Timer Relay Switch Module
*Used for Vehicle equipment-delay to prevent car ignition, prevention of high sudden current to burn components and devices
*Turn on the power relay time delay suction together
*Delay time is adjustable(0 ~ 10 seconds)
*Increase the potentiometers can increase the delay time
*Increase capacitor C1 can increase delay time
*With input power indicator light
*With relay suction close lamp switch trigger indicator light
*Can control AC 220V /10A the equipment(Max load 2000W)
*With relay fly-wheel protection
*Delay time formula: T = 1.1 RC. Such as: capacity 100uF resistance 100 k T = 1.1 * 100000 * 0.0001 = 11S
*100% Brand new and high quality
Specifications:
*Model: 12V NE555 Delay Relay(0-10s)
*Main Chip: NE555
*Working voltage: DC 12V
*Dimension: 6.8*2.1cm/ 2.68*0.83 inch(Approx)
*Color: As pictures show
Package Content:
1*Delay Timer Switch
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

2 PCS 15A 400W MOS FET Trigger Switch Drive Module PWM Regulator Control Panel
Details:
* This module uses dual-MOS parallel active output for lower resistance, more current, strong power.
* You can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves, etc., you can enter
PWM, motor speed control, lamp brightness.
* Easily control high power devices
* 15A, 400W, to meet the most use of the equipment
* Supports PWM
* Unlimited switch
* The trigger source: digital high-low (DC3.3V - 20V), can be connected microcontroller IO port, PLC interfaces,
* Frequency: 0--20KHZ
* Operating temperature: -40 to 85degree Celsius
* Operating Voltage: DC 5V - 36V
* Quantity: 2Pcs
Package contents:
2* Trigger Switch Drive Modules
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Control Trigger Switch Drive Panel DC 5V-36V Kit Set 2PCS High Quality
Details:
* This module uses dual-MOS parallel active output for lower resistance, more current, strong power.
* You can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves, etc., you can enter
PWM, motor speed control, lamp brightness.
* Easily control high power devices
* 15A, 400W, to meet the most use of the equipment
* Supports PWM
* Unlimited switch
* The trigger source: digital high-low (DC3.3V - 20V), can be connected microcontroller IO port, PLC interfaces,
* Frequency: 0--20KHZ
* Operating temperature: -40 to 85degree Celsius
* Operating Voltage: DC 5V - 36V
* Quantity: 2Pcs
Package contents:
2* Trigger Switch Drive Modules
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

1* PTF08A LY2NJ J LY2N LY2 AC 8-PIN 10A 220VAC Power Relay Coil With LED Pilot
Item Details:
*LY2NJ J LY2N LY2 AC 200V/220V 8PIN 10A 240VAC 28VDC Power Relay Coil Quality
*100% brand new and high quality
*DPDT, with LED pilot
*Size: 4.1*2.7*2.0cm or 1.61"*1.06"*0.79" inch(Approx)
*Weight: 32g
*Control Voltage(V) :220VAC
*Terminal : 8 pins plug-in type
*Socket : PTF08A (Not included)
Package Contents:
1*Relay Coil
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

10A AC-220V Coil Power Relay DPDT LY2NJ Capacitor Filter Rectifier W/ LED Pilot
Item Details:
*LY2NJ J LY2N LY2 AC 200V/220V 8PIN 10A 240VAC 28VDC Power Relay Coil Quality
*100% brand new and high quality
*DPDT, with LED pilot
*Size: 4.1*2.7*2.0cm or 1.61"*1.06"*0.79" inch(Approx)
*Weight: 32g
*Control Voltage(V) :220VAC
*Terminal : 8 pins plug-in type
*Socket : PTF08A (Not included)
Package Contents:
1*Relay Coil
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

12/24V DC 110/120/220/230V AC Coil DPDT Power Relay LY2NJ 8-Pin With Socket Base
Item Details:
*Power Relay 10A LY2NJ DPDT 8 Pins with Socket
*Perfect replacement for the old or worn one
*Made of high quality material, durable and reliable to use
*100% brand new and high quality
*Color: As Pictures Show
*Indication: LED Working
*Optional Coil Voltage: 12V DC, 24V DC, 12V AC, 24V AC, 110/120V AC, 220/230V AC, 380V AC
*Contact Load: 10 A each Pole
*Pins Number: 8 Pins
*Circus Type: DPDT
Package Contents:
1*Relay
1*Socket
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

12/24V DC 110/120/220/230V AC Coil DPDT Power Relay LY2NJ 8-Pin With Socket Base
Item Details:
*Power Relay 10A LY2NJ DPDT 8 Pins with Socket
*Perfect replacement for the old or worn one
*Made of high quality material, durable and reliable to use
*100% brand new and high quality
*Color: As Pictures Show
*Indication: LED Working
*Optional Coil Voltage: 12V DC, 24V DC, 12V AC, 24V AC, 110/120V AC, 220/230V AC, 380V AC
*Contact Load: 10 A each Pole
*Pins Number: 8 Pins
*Circus Type: DPDT
Package Contents:
1*Relay
1*Socket
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

12/24V DC 110/120/220/230V AC Coil DPDT Power Relay LY2NJ 8-Pin With Socket Base
Item Details:
*Power Relay 10A LY2NJ DPDT 8 Pins with Socket
*Perfect replacement for the old or worn one
*Made of high quality material, durable and reliable to use
*100% brand new and high quality
*Color: As Pictures Show
*Indication: LED Working
*Optional Coil Voltage: 12V DC, 24V DC, 12V AC, 24V AC, 110/120V AC, 220/230V AC, 380V AC
*Contact Load: 10 A each Pole
*Pins Number: 8 Pins
*Circus Type: DPDT
Package Contents:
1*Relay
1*Socket
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

12/24V DC 110/120/220/230V AC Coil DPDT Power Relay LY2NJ 8-Pin With Socket Base
Item Details:
*Power Relay 10A LY2NJ DPDT 8 Pins with Socket
*Perfect replacement for the old or worn one
*Made of high quality material, durable and reliable to use
*100% brand new and high quality
*Color: As Pictures Show
*Indication: LED Working
*Optional Coil Voltage: 12V DC, 24V DC, 12V AC, 24V AC, 110/120V AC, 220/230V AC, 380V AC
*Contact Load: 10 A each Pole
*Pins Number: 8 Pins
*Circus Type: DPDT
Package Contents:
1*Relay
1*Socket
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

1x12VDC Coil General Purpose Powers Relay For MY2NJ 8PIN 5A PYF08A Sockets
Item Details:
*Power Relay 10A LY2NJ DPDT 8 Pins with Socket
*Perfect replacement for the old or worn one
*Made of high quality material, durable and reliable to use
*100% brand new and high quality
*Color: As Pictures Show
*Indication: LED Working
*Optional Coil Voltage: 12V DC, 24V DC, 12V AC, 24V AC, 110/120V AC, 220/230V AC, 380V AC
*Contact Load: 10 A each Pole
*Pins Number: 8 Pins
*Circus Type: DPDT
Package Contents:
1*Relay
1*Socket
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

1x12VDC Coil General Purpose Powers Relay For MY2NJ 8PIN 5A PYF08A Sockets
Item Details:
*Power Relay 10A LY2NJ DPDT 8 Pins with Socket
*Perfect replacement for the old or worn one
*Made of high quality material, durable and reliable to use
*100% brand new and high quality
*Color: As Pictures Show
*Indication: LED Working
*Optional Coil Voltage: 12V DC, 24V DC, 12V AC, 24V AC, 110/120V AC, 220/230V AC, 380V AC
*Contact Load: 10 A each Pole
*Pins Number: 8 Pins
*Circus Type: DPDT
Package Contents:
1*Relay
1*Socket
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

1x12VDC Coil General Purpose Powers Relay For MY2NJ 8PIN 5A PYF08A Sockets
Item Details:
*Power Relay 10A LY2NJ DPDT 8 Pins with Socket
*Perfect replacement for the old or worn one
*Made of high quality material, durable and reliable to use
*100% brand new and high quality
*Color: As Pictures Show
*Indication: LED Working
*Optional Coil Voltage: 12V DC, 24V DC, 12V AC, 24V AC, 110/120V AC, 220/230V AC, 380V AC
*Contact Load: 10 A each Pole
*Pins Number: 8 Pins
*Circus Type: DPDT
Package Contents:
1*Relay
1*Socket
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

1x12VDC Coil General Purpose Powers Relay For MY2NJ 8PIN 5A PYF08A Sockets
Item Details:
*Power Relay 10A LY2NJ DPDT 8 Pins with Socket
*Perfect replacement for the old or worn one
*Made of high quality material, durable and reliable to use
*100% brand new and high quality
*Color: As Pictures Show
*Indication: LED Working
*Optional Coil Voltage: 12V DC, 24V DC, 12V AC, 24V AC, 110/120V AC, 220/230V AC, 380V AC
*Contact Load: 10 A each Pole
*Pins Number: 8 Pins
*Circus Type: DPDT
Package Contents:
1*Relay
1*Socket
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

2 Pcs JD1914 12V 100A 5-Pins SPDT Power Relays Parts Electric Components Useful
Details:
* This electromagnetic relay is an important electric component to control current.
* 100% Brand new and high quality
* 5 pins, SPDT plastic housing.
* Can adjust automatically, protect and transform the electric circuit.
* Application: remote control, communication, automatic control system, electronic equipments, etc.
* Type: SPDT
* Material: Plastic Metal
* Dimensions: 28*28*25 mm/1.1*1.1*1 inch(approx)
* Quantity: 2PCS
Package contents:
2* Electromagnetic Relays
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Fridge Thermometer Aquarium Tank With Probe Celsius Thermometer Digital
Detail:
*Thermometer with Probe is suitable for car, home, fridge, aquarium tank, baby's bath water, etc.
*With large LCD display, easy to read.
*Suitable indoor or outdoor use.
*Mini size and lightweight, easy to carry.
*Item Condition:100% Brand New
*Material:Plastic
*Color: Black(As Pictures Show)
*Dimension:4.8*2.8*1.5cm/1.89''x1.10''x0.59''(Approx.)
*Power supply: 2 x button batteries(Included)
*Probe length:1m/3.3ft(Approx.)
*Measuring temperature:-50degree Celsius ~ 110degree Celsius
*Accuracy:±1degree Celsius
*Resolution:0.1degree Celsius
*Sensor type:NTC (10K/3435)
*Working voltage:1.5V
Package Contents:
1*Thermometer with Probe
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Mini Digital NTC Sensor Fridge Aquarium Tank Thermometer W/ Probe Black Tool
Detail:
*Thermometer with Probe is suitable for car, home, fridge, aquarium tank, baby's bath water, etc.
*With large LCD display, easy to read.
*Suitable indoor or outdoor use.
*Mini size and lightweight, easy to carry.
*Item Condition:100% Brand New
*Material:Plastic
*Color: Black(As Pictures Show)
*Dimension:4.8*2.8*1.5cm/1.89''x1.10''x0.59''(Approx.)
*Power supply: 2 x button batteries(Included)
*Probe length:1m/3.3ft(Approx.)
*Measuring temperature:-50degree Celsius ~ 110degree Celsius
*Accuracy:±1degree Celsius
*Resolution:0.1degree Celsius
*Sensor type:NTC (10K/3435)
*Working voltage:1.5V
Package Contents:
1*Thermometer with Probe
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

1* Digital-LCD Temperature Fridge Aquarium-Tank Thermometer With Probe Celsius
Detail:
*Thermometer with Probe is suitable for car, home, fridge, aquarium tank, baby's bath water, etc.
*With large LCD display, easy to read.
*Suitable indoor or outdoor use.
*Mini size and lightweight, easy to carry.
*Item Condition:100% Brand New
*Material:Plastic
*Color: Black(As Pictures Show)
*Dimension:4.8*2.8*1.5cm/1.89''x1.10''x0.59''(Approx.)
*Power supply: 2 x button batteries(Included)
*Probe length:1m/3.3ft(Approx.)
*Measuring temperature:-50degree Celsius ~ 110degree Celsius
*Accuracy:±1degree Celsius
*Resolution:0.1degree Celsius
*Sensor type:NTC (10K/3435)
*Working voltage:1.5V
Package Contents:
1*Thermometer with Probe
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

10/25/40/50/60/75/100DA Solid State Relay Fast Switch SSR-25DA SSR-40DA AA SSR
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Long service life and high reliability
*Highly reliable, compact size designed to provide maximum simplicity for the user
*Fast switching
*Reducing electromagnetic interference
*Low drive voltage and current
*Unique shapes and novel structures
*Particularly suitable for corrosion, moisture, dust and other harsh environments
*Widely used in many automatic control systems
Specification:
*Optional Types: 10DA/25DA/40DA/50DA/60DA/75DA/100DA
10DA
*Size: 6 x 4.5 x 2.3cm(Approx.)
*Output Voltage: AC 24-380V
*Output Current: 10A
*Input Voltage: DC 3-32V
*Control Method: DC to AC
*Installation Method: Bolted
25DA
*This Is The Solid State Relay SSR-25DA 25A / 250V 3-32VDC.
*Input Voltage: 3-32VDC
*Output Voltage: 24-380VAC
*Output Current: 25A
*Working Voltage: 250V
*Opening Voltage: ≤1V
*One-Time Time: ≤10ms
*Off Leakage Current: ≤2mA
*Color: White(As pictures show)
*Size: 60 * 45 * 23mm(Approx.)
40DA
*Color: Grey.(As pictures show)
*Output Voltage: AC 24-380V
*Output Current: 40A.
*Input Voltage: DC 3-32V.
*Control Method: DC to AC.
*Installation Method: Bolted.
*Size: 6.5 cm x 4.5 cm x 2.2 cm / 2.56 inches x 1.77 inches x 0.87 inches.(Approx.)
50DA
*Output Voltage: AC 24-380V
*Output Current: 50A
*Input Voltage: DC 3-32V
*Control Method: DC to AC
Installation Method: Bolted
*3-25mA Control Current DC
*State Leakage Current: ≤2mA
*On-State Pressure Reduce: ≤1.5VAC
*Shutdown Time: ≤10mS
*Dielectric Strength: 2500Vac
*Insulation Resistance: 500Mω / 500VDC
*Ambient Temperature: -30degree Celsius- 75degree Celsius
*Work Indicator: LED
60DA
*Solid State Relay: DC to AC
*Input Working Voltage: 3V~32V DC
*Rated Load Current: 60A
*Output Working Voltage: 24~380V AC
*Single-phase solid state relays are ideal for a variety of home/industrial automation process control applications such as heating and cooling control, CNC machinery, remote control systems, etc.
*Highly reliable, compact size designed to provide maximum simplicity for the user
*High isolation above 50MΩ / 500VDC
*High dielectric properties over 2.5KVAC / 1 minute
*Minimum Blocking Voltage: 600VAC
*Leakage Current: 3.0mA
*LED indicator
*Please note that a heat sink must be used when the load exceeds 10A.
75DA
*Model: SSR-75 DA
*Input Voltage: 3-32VDC
*Output Voltage: 24-380VAC
*Output Current: 75A
*Working Voltage: 250V
*Opening Voltage: ≤1V
* One-Time Time: ≤10ms
*Off Leakage Current: ≤2mA
100DA
*Model: SSR-100 DA
*Input Voltage: 3-32VDC
*Output Voltage: 24-380VAC
*Output Current: 100A
*Working Voltage: 250V
*Opening Voltage: ≤1V
*One-Time Time: ≤10ms
*Off Leakage Current: ≤2mA
25AA
*Color: White(As pictures show)
* Size: 6.3 * 4.5 * 2.3 cm(Approx.)
* Output Voltage: AC 24-380V
*Output Current: 25A
*Input Voltage: DC 3-32V
*Control Method: Exchange To Exchange
*Switching Time: ≤10ms
*Installation Method: Bolted
40AA
*This is the solid state relay SSR-40AA
*Model: SSR-40AA
*Input Voltage: 80-250V AC
*Output Voltage: 24-380V AC
*Output Current: 40A
*Working Voltage: 250V
*Turn On The Voltage: <= 1V
*One-Time Time: <= 10ms
*Off Leakage Current: <= 2mA
*Relay Size(L * W * H): 6 x 4.5 x 2.2cm / 2.3 x 1.7 x 0.8inch (Approx.)
*Radiator Size(L * W * H): 8 x 5 x 5cm / 3.1 x 2 x 2inch(Approx.)
*Total Size(L * W * H): 8 x 5 x 7.2 cm / 3.1 x 2 x 2.8 inches (Approx.)
Package Contents:
1*Relay
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10/25/40/50/60/75/100DA Solid State Relay Fast Switch SSR-25DA SSR-40DA AA SSR
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Long service life and high reliability
*Highly reliable, compact size designed to provide maximum simplicity for the user
*Fast switching
*Reducing electromagnetic interference
*Low drive voltage and current
*Unique shapes and novel structures
*Particularly suitable for corrosion, moisture, dust and other harsh environments
*Widely used in many automatic control systems
Specification:
*Optional Types: 10DA/25DA/40DA/50DA/60DA/75DA/100DA
10DA
*Size: 6 x 4.5 x 2.3cm(Approx.)
*Output Voltage: AC 24-380V
*Output Current: 10A
*Input Voltage: DC 3-32V
*Control Method: DC to AC
*Installation Method: Bolted
25DA
*This Is The Solid State Relay SSR-25DA 25A / 250V 3-32VDC.
*Input Voltage: 3-32VDC
*Output Voltage: 24-380VAC
*Output Current: 25A
*Working Voltage: 250V
*Opening Voltage: ≤1V
*One-Time Time: ≤10ms
*Off Leakage Current: ≤2mA
*Color: White(As pictures show)
*Size: 60 * 45 * 23mm(Approx.)
40DA
*Color: Grey.(As pictures show)
*Output Voltage: AC 24-380V
*Output Current: 40A.
*Input Voltage: DC 3-32V.
*Control Method: DC to AC.
*Installation Method: Bolted.
*Size: 6.5 cm x 4.5 cm x 2.2 cm / 2.56 inches x 1.77 inches x 0.87 inches.(Approx.)
50DA
*Output Voltage: AC 24-380V
*Output Current: 50A
*Input Voltage: DC 3-32V
*Control Method: DC to AC
Installation Method: Bolted
*3-25mA Control Current DC
*State Leakage Current: ≤2mA
*On-State Pressure Reduce: ≤1.5VAC
*Shutdown Time: ≤10mS
*Dielectric Strength: 2500Vac
*Insulation Resistance: 500Mω / 500VDC
*Ambient Temperature: -30degree Celsius- 75degree Celsius
*Work Indicator: LED
60DA
*Solid State Relay: DC to AC
*Input Working Voltage: 3V~32V DC
*Rated Load Current: 60A
*Output Working Voltage: 24~380V AC
*Single-phase solid state relays are ideal for a variety of home/industrial automation process control applications such as heating and cooling control, CNC machinery, remote control systems, etc.
*Highly reliable, compact size designed to provide maximum simplicity for the user
*High isolation above 50MΩ / 500VDC
*High dielectric properties over 2.5KVAC / 1 minute
*Minimum Blocking Voltage: 600VAC
*Leakage Current: 3.0mA
*LED indicator
*Please note that a heat sink must be used when the load exceeds 10A.
75DA
*Model: SSR-75 DA
*Input Voltage: 3-32VDC
*Output Voltage: 24-380VAC
*Output Current: 75A
*Working Voltage: 250V
*Opening Voltage: ≤1V
* One-Time Time: ≤10ms
*Off Leakage Current: ≤2mA
100DA
*Model: SSR-100 DA
*Input Voltage: 3-32VDC
*Output Voltage: 24-380VAC
*Output Current: 100A
*Working Voltage: 250V
*Opening Voltage: ≤1V
*One-Time Time: ≤10ms
*Off Leakage Current: ≤2mA
25AA
*Color: White(As pictures show)
* Size: 6.3 * 4.5 * 2.3 cm(Approx.)
* Output Voltage: AC 24-380V
*Output Current: 25A
*Input Voltage: DC 3-32V
*Control Method: Exchange To Exchange
*Switching Time: ≤10ms
*Installation Method: Bolted
40AA
*This is the solid state relay SSR-40AA
*Model: SSR-40AA
*Input Voltage: 80-250V AC
*Output Voltage: 24-380V AC
*Output Current: 40A
*Working Voltage: 250V
*Turn On The Voltage: <= 1V
*One-Time Time: <= 10ms
*Off Leakage Current: <= 2mA
*Relay Size(L * W * H): 6 x 4.5 x 2.2cm / 2.3 x 1.7 x 0.8inch (Approx.)
*Radiator Size(L * W * H): 8 x 5 x 5cm / 3.1 x 2 x 2inch(Approx.)
*Total Size(L * W * H): 8 x 5 x 7.2 cm / 3.1 x 2 x 2.8 inches (Approx.)
Package Contents:
1*Relay
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.